1. PRINT OUT THE PATTERN ON HEAVY CARD STOCK 2. CUT OUT THE PAPER PATTERN PIECES 3. TRACE THE PATTERN PIECES ONTO LEATHER 4. CUT OUT THE LEATHER PIECES 5. BURNISH ALL POCKET TOPS BEFORE ASSEMBLY 6. GLUE BOTH PIECES OF POCKET A TOGETHER GRAIN SIDES OUT 7. GLUE POCKET B TO ONE SIDE OF WALLET ASSEMBLY LEAVING THE CURVED SIDE OPEN. STITCH ACROSS ONE OF THE LONG SIDES ONLY 8. GLUE POCKET C TO THE OPPOSITE SIDE OF THE WALLET ASSEMBLY. THE CURVED POCKET TOP SHOULD REMAIN UNGLUED AND FACE THE PREVIOUSLY STITCHED SIDE. STITCH ALONG THE OTHER 3 SIDES. 9. TRIM, SAND, EDGE, BURNISH, AND/OR PAINT EDGES AS DESIRED 10: ENJOY :) ORDER OF OPERATIONS MINIMAL CARD WALLET RECOMMENDED LEATHER WEIGHT 3oz
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
-
1. PRINT OUT THE PATTERN ON HEAVY CARD STOCK
2. CUT OUT THE PAPER PATTERN PIECES
3. TRACE THE PATTERN PIECES ONTO LEATHER
4. CUT OUT THE LEATHER PIECES
5. BURNISH ALL POCKET TOPS BEFORE ASSEMBLY
6. GLUE BOTH PIECES OF POCKET A TOGETHER GRAIN SIDES OUT
7. GLUE POCKET B TO ONE SIDE OF WALLET ASSEMBLY LEAVING THE CURVED SIDE OPEN. STITCH ACROSS ONE OF THE LONG SIDES ONLY
8. GLUE POCKET C TO THE OPPOSITE SIDE OF THE WALLET ASSEMBLY. THE CURVED POCKET TOP SHOULD REMAIN UNGLUED AND FACE THE PREVIOUSLY STITCHED SIDE. STITCH ALONG THE OTHER 3 SIDES.
9.TRIM, SAND, EDGE, BURNISH, AND/OR PAINT EDGES AS DESIRED
10: ENJOY :)
ORDER OF OPERATIONS
MINIMAL CARD WALLET
RECOMMENDED LEATHER WEIGHT
3oz
-
POCKET A POCKET C
POCKET B
Related Documents
