Features DESCRIPTION ELECTRICAL CHARACTERISTICS Applications ENVIRONMENTAL ACTUAL COMB GENERATOR RF OUTPUT PERFORMANCE MODEL CG3349A www.Omniyig.com • 3350 Scott Blvd., Bldg. #66 • Santa Clara, CA 95054-3125 • (408) 988-0843 • FAX (408) 727-1373 • [email protected] OMNIYIG INC. Output RF Power, dBm Input Frequency, GHz +10 0 -10 -20 -30 -40 1 2 4 8 12 18 22 26 Model CG3349A Input Frequency = 1 GHz Input RF Power = +1-mW Low Harmonic Conversion Loss Spectrum Purity Repeatable RF Performance from Unit to Unit Small Packaging Input Matched for Input Broad Band Tuning Internal Self-biasing and DC Return Low Input RF Power (0 to +5 dbm) Wireless Systems Spectrum Analyzers Sweep Generators ECM Receivers Frequency Synthesizers Broadband Test Equipment Telemetry Communication Equipment OMNIYIG’s newest MINI-SIZE Comb Generator design with removable SMA connectors. The RF input power requirement for each Comb Generator is as low as zero (0) dbm and is matched to a 50-ohm impedance with an integrated wideband transformer circuit in which the device can accept a tunable input frequency, with some designs accepting an input frequency from 1.0 to 2.0 GHz. Maximum Power Rating Operating Temperature Storage Temperature Vibration Shock MINI SIZE COMB GENERATORS with Integrated RF Input RF Amplifier and Removable SMA Connector .............................................1 watt ................................-55°C to +85°C .................................-65°C to +110°C ..............................................20 G 100 to 2000 Hz ............................................................50 G 11 mSec 1. Power variation vs. temperature is typically ± 1 dB over the temperature range -55°C to +75°C. 2. Input power 0 - 4 dBm at 25°C. 3. Input VSWR: The input VSWR as an option can be held to 2:1 up to 7% of the bandwidth and 3:1 up to 20% of the bandwidth. 4. Fundamental feedthrough +2 dBm. 5. Bias: The comb generator requires no external biasing. Each generator is provided with internal integrated pro-proportional biasing. 6. External supply voltage for amplifiers +12 V at 380 mA max. Other voltages are available.