Baluchistan University of Information Technology, Engineering and Management Sciences Quetta BUITEMS Quality & Excellence in Education Lab report: Mine ventilation Submitted to: Mining Engineering Department of UET Lahore Prepared by: Students of Mining Engineering Department BUITEMS Quetta Group # 4 No Names CMS (1) Nouman Rahim 5714 (2) Saqib Ajmair 5749 (3) Khushal Zeb 5703 (4) Fazal ullah 4444 (5) Ijaz-ul-haq 10559 (6) Kausar Sultan shah 8911 (7) Naeem Abas 9671 (8) M.Ejaz rasheed 10837
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Baluchistan University of Information Technology,
Engineering and Management Sciences Quetta
BUITEMS Quality & Excellence in Education
Lab report: Mine ventilation
Submitted to: Mining Engineering Department of UET Lahore
Prepared by: Students of Mining Engineering Department BUITEMS Quetta
Group # 4
No Names CMS
(1) Nouman Rahim 5714
(2) Saqib Ajmair 5749
(3) Khushal Zeb 5703
(4) Fazal ullah 4444
(5) Ijaz-ul-haq 10559
(6) Kausar Sultan shah 8911
(7) Naeem Abas 9671
(8) M.Ejaz rasheed 10837
Acknowledgment
We are very grateful to UET Lahore for giving us the chance of performing practical lab work in such a
friendly and learning environment. We would like to pay thanks to Engr. -------- and our organizer
Engr.--------------- for their help and cooperation throughout the week.
We would also like to thanks Engr.--------------, Engr. -------------, Engr. ----------------- and
Engr.------------------ for giving us the great learning time and helping us in performing practical work at
UET Lahore.
We are very grateful and thankful from core of our hearts to all of them for so supporting and helpful to
us with so polite and friendly attitude.
Preface
In order to be competitive in the world of engineering, in order to get
strong grip on theoretical knowledge, An Engineer should have practical
exposure. Theoretical knowledge and practical experience are two
different modes of knowledge. In order to see practical implementation
of theoretical knowledge in laboratories is the best place. Performing
practical work in disciplined organization like UET Lahore is a great
honor for us. UET is one of the most modern university in Pakistan
which labs. Are, equipped with latest machinery. During at UET we gain
a lot of knowledge about practical engineering work. We tried our best
to gain as much knowledge as we can in a week. The way UET treated us
is more than appreciation.
Mine ventilation
List of experiments:
Experiment# 01 Determination of inlet by using Traversing Pitot tube
Experiment#02 To measure the velocity of air by using vane anenometer
Experiment#03 Calibration of anenometer
Experiment#04 To measure the relative humidity of air using sling psychomotor.
Experiment#5 Determination of the effect of miss alignment of pitot static tube an air stream (velocity pressure variation with an angle of yaw)
Experiment#06To determine the effect of miss alignment of a pitot static tube an air stream (static pressure variation with an angle of yaw).
Experiment#07Digital gas detectors
Experiment#08
To measure the dust concentration in AMBIANT air by using KANOMAX (model: 3421) digital Dust monitor
Experiment#09To determine the effect of miss-alignments of an anenometer to an angle of yaw
Experiment#01
To determine the inlet by using the traversing pitot static tube
Applications
It is used to determine the direction of air. It is used to measure a velocity.
A range of volume flow rates are set up using the resistance screens singly or in combinations. First with one fan only running and for higher flows with fan no 1. In this case we repeat different resistances inside the educator with following mesh.
1st of all there are no resistance 2ndly the resistance of 8 mesh, 3rdly the resistance of 16 mash, and the last of 36 mash. With increase in the resistance the air speed decreases.
Objective: To measure velocity of air by using vane anenometer
Apparatus: The apparatus is vane anemometer. It consists of a dial
which gives distance. It has 3-scale, the total distance of the first one is 100ft, second one is 1000ft and the third one is 10000ft. and stopwatch which to calculate the specific time for measuring the velocity of air.
S.NO START TIME
(Sec)
END TIME
(SEC)
DISTANCE
(ft)
VELOCITY
V=d/t
m/sec
1 0 48.4
4005.847
2 0 70 455 6.5
Experiment # 03
Objective:
To measure velocity of air by using vane anemometer
Apparatus:
The apparatus is vane anemometer. It consists of a dial which gives distance. It has 3 scales the 1st drives total distance of 100ft, and the 3rd one gives total distance of 10000 ft.
Firstly we had vane-anemometer and stop watch for this experiment. We utilize that instrument for the purpose of measuring the velocity of air. We put vane-anemometer against the air in opposite direction and the movement of air exerted force at the propellers of vane anemometer and with the help of stop watch use measure the time accurately and the velocity of air can be measured on the vane anemometer reading.
Table
s. no Start time (sec) End time (sec) Distance (ft) Velocity ft/sec
1 0 48.4 400 5.847
2 0 70 455 6.5
Experiment # 04:
To measure the relative humidity of air using sling psychomotor.
Apparatus:
Sling psychomotor
Theory:
Humidity the no of gram of water in 100g of air is called humidity.
The relative humidity:
It is the ratio between partial pressure of water vapour in the mixture to the saturated vapour pressure of water at prescribed temperature.
Relative humidity=partial pressure of water vapour/saturated vapour pressure* 100
It is expressed as a % if the relative humidity is very low inside the mine then it extracted humidity from our body and eyes, which produced skin burn.
Inside the mine the humidity should not be less than 25% and never exceed to 60%.
Dry bulb temperature:
Temperature of air measured by a thermometer freely exposed to the air but shielded from radiation and moisture.
Wet bulb temperature:
The lowest temperature and object may be cooled to be the process of evaporation it is read directly from wet bulb.
Measurement:
1st we dipped the wet bulb thermometer in water and then rotate it the time interval is measured by stop watch. Then find the point on the sling psychomotor at which the dry bulb temperature become parallel to the wet bulb temperature which gives relative humidity.
Result:
The relative humidity of air is 45%
Experiment#05
To calibrate anemometer or Anemometer calibration
Apparatus:
Mine ventilation Educator, anemometer
Related theory:
Anemometer is a device to measure the direction and speed of wind/air. This experiment is performed with the help of educator.
Calculations:
To find the velocity by velocity pressure (Pv)
PV=1/2 ƍ V2
Here ƍ= density of fluid
PV=velocity pressure
V=velocity of air
T= temperature
β=barometric pressure
ƍ=0.4627β/ (273+t)
In this case the value of velocity is called true velocity and then to find the velocity of air by anemometer. This velocity is less accurate which have some errors which will be eliminated
Yaw of pitot static tube (this is for experiment # 05 & experiment # 06)
To determine the effect of miss alignment (yaw) of a pitot static tube to an air stream (Velocity pressure variation with an angle of yaw)
Apparatus:
Mine ventilation educators, pitot static tube and manometer
Related theory:
Angle of yaw: it is the angle b/w axis of instrument (pitot static tube) and the mean velocity of air stream.
Pitot static tube:
It is an instrument which is used to find the speed of air, static pressure and the velocity pressure of air stream. It has to consecutive tube, one static which consists of perforated and while the second end is directly open tube. When the perforated tube is connected to –ive end of manometer. It is used to measure static pressure while the open end is connected to the +ive end to the manometer then it will gives the velocity pressure.
Manometer:
It is an instrument which is used to measure the air pressure. It has two limbs one is +ive and the other is –ive.
Procedure:
First we check the room temperature and pressure and then find different values for different angles from -450 to +450.after that finding the value of PVɵ of manometer. In this case connected the +ive end of manometer with direct opening of pitot static tube then find the different values and plot the graph by taking ɵ along axis while PVɵ/Pv0 on y axis. At last find the value of (1- PVɵ/Pv0)*100= %
To determine the effect of miss alignment of pitot static tube to an air stream (static pressure, variation with angle of yaw)
Apparatus:
Mine ventilation Educator, anemometer
Related theory:
Angle of yaw: it is the angle b/w axis of instrument (pitot static tube) and the mean velocity of air stream.
Pitot static tube:
It is an instrument which is used to find the speed of air, static pressure and the velocity pressure of air stream. It has to consecutive tube, one static which consists of perforated and while the second end is directly open tube. When the perforated tube is connected to –ive end of manometer. It is used to measure static pressure while the open end is connected to the +ive end to the manometer then it will gives the velocity pressure.
Manometer:
It is an instrument which is used to measure the air pressure. It has two limbs one is +ive and the other is –ive.
Procedure:
First we check the room temperature and pressure and then find different values for different angles from -450 to +450.after that finding the value of Psɵ of manometer. In this case the –ive terminal of manometer is connected with direct opening of pitot static tube then plot a graph by taking ɵ along X-axis while Psɵ/Ps0 along Y-axis at last find (1- Psɵ/Ps0)*100=%
To study the dust concentration an ambient air by using kanomax (model: 3421) digital dust monitor.
Apparatus:
Aerosol monitor/ kanomax (model 3421), digital dust monitor
Procedure:
In this experiment first of all we do cleaning or zero adjacent, open the out let pore and filter, which clean the lens indicated by red light on the zero adjustment.
Then celebrate the instrument. The calibration should be 971cpm.
Our calibration is 988 which are nearly equal to the standard calibration 971cpm.
Result:
The dust content in room is 49cpm for I minute or .049mg for one minute.
Experiment#09
Measurement of quantity of gases with the help of Digital gas detectors
Theory:
Digital gas detectors are used to measure the concentration of gases.
(1) “TWA” (time weighted average is a value).its allowable limits is 8 hrs means a person do work with in mine for eight hours.
(a) CO is colorless, odorless, tasteless, toxic and flammable. It is also called white damp. Its explosive range is (12.5-74%). It is 300 times more reactive than O2 with hemoglobin. So it prevents O2 to react with hemoglobin in blood. A co reacts with hemoglobin. TWA value is 50ppm STEL value is 400ppm it should not exceed then that value TLV-C value is 200ppm (points per million)
(2) H2S Detector:
It is also called stink damp, it is pungent, colorless and toxic
Its explosive range is 4-44% TWL value is 10ppm STEL value is 15ppm TLV-C value is 300ppm