MILLIKEN MILLWORK, INC. LOCATIONS EZ FLEX EZ Steel Framewaynecomputer.com/sites/lodilumber/wp-content/uploads/2014/07/... · To apply wood casings, hold casing against frame and mark

Steel FrameFLEXEZ

R

Your Doorway to a Beautiful Home

ADJUSTABLE & FIXED STEEL DOOR FRAMES

Steel FrameEZ R


MILLIKEN MILLWORK, INC. LOCATIONS

Michigan (HQ)6361 Sterling Drive NorthSterling Heights, MI 48312

586.264.0950800.686.9218

Fax: 586.264.5430

Ohio400 Circle Freeway Drive

Cincinnati, OH 45246513.874.6771800.215.3770

Fax: 513.870.0242

Pennsylvania172 Plummer RoadSidman, PA 15955

814.487.7800800.452.0251

Fax: 814.487.7850

North Dakota1358 38th Street North

Fargo, ND 58102701.282.5700800.342.4735

Fax: 701.282.5702

South Dakota1820 E. 54th Street North

Sioux Falls, SD 57104605.336.1910800.843.0076

Fax: 605.335.1324

Pennsylvania1275 Manheim PikeLancaster, PA 17601

717.299.2361800.360.2364

Fax: 717.293.9249

(Sidman, PA) (Lancaster, PA)

For more information on Milliken Millwork, Inc. products and services, please visit:

www.millikenmillwork.com

Part No. 110299 • 5/13

Slip-On Drywall Application

(Interior Application)

Universal Application(Interior &

Exterior Application)

Adjustable T-Strike18-gage, two piece strikefor correct fit; ASA anddeadbolt strike available

Steel Casing - 22 Gagesteel casing standard; aluminium, Colonial steel or decorative woodoptional

Casing CornerAlignment tabholds miters tight

ClosureBase

Specifically DesignedTab SystemAligns and holdsbase headerand closure

Plate SystemExclusive systemadjusts to a varietyof wall sizes

HingeReinforcements11 gage plates arewelded to frame; fits specified hinges

Steel FrameeE Z R

Steel FrameFLEXE Z

R

ADJUSTABLE SPLIT-FRAME FIXED FRAME

Casing CornerAlignment tab holds miters tight

Steel Casing - 22 Gagesteel casing; aluminium,Colonial steel or decorativewood optional


SpecificallyDesignedHeaderAligns and holdsjambs in properposition

HingeReinforcements11 gage plates are welded to frame; fitsspecified hinges

Steel FrameFLEXE Z

Steel FrameE ZInstallation Instructions

Place header over wall, centering header in opening.

If necessary, fasten temporarily with nails or screws

1Hold hinge jamb at an angle, slide jamb over wall, position-

ing the door stop between header tabs and the header

door stop.

2 3 4 5Repeat step 2 for the

strike jambRemove nails or screws used to hold the header. Pull down on

header so that the jambs rest on finished floor. If the finished floor is not installed, place a shim of the same thickness as finished floor, under each jamb. Insert

one screw or nail at top of hinge jamb. Install door and close

in opening.

Using door as a template adjust frame to door so that clearances between door

and the frame are equal and between 1/16" - 1/8". If a door is not available square

and plumb the frame using a carpenter’s square and level. Fasten frame starting at top

of the hinge jamb with recommended fasteners

To apply wood casings, hold casing against frame and mark the location of each oval nailing slot (see figure below). Then place the edge of the casing 1/4" from the inside edge of the frame. Locate 6d finishing nails at locations marked, 1/2" from inner edge of the scaling. This will allow nailing through the oval slot.

6

Header

StrikeJamb

HingeJamb

FinishedFloor

Nail/Screw Holes

Casing Clip Screw Holes

Oval Clearance Slots for wood casing nails

ROUGHOPENINGWIDTH

Nominal door width + 1-1/4"

ROUGHOPENINGHEIGHT

Net frame height+ 1/2"-3/4"

Wall Construction Wood Studs and DrywallRecommended Fasteners:

1-1/4" (min.) Drywall Screws Coarse thread or 6d common nails

Wall Construction Metal Studs and DrywallRecommended Fasteners:

1-1/4" (min.) Type “S” Bugle Head Self-Tapping Screws

1 6

Commercial trends today require the strength and durability of commercial products but the warmth and comfort or residential styling. Our blended inventory reflects these trends and allows us to respond quickly. Sourcing light commercial products can be complicated, time consuming and very frustrating. Our program is designed to simplify that process.

It is driven by:

• Simplicity – Make it easy for you, your customer and Milliken Millwork• Speed – Light Commercial Products delivered at residential speeds• Convenience – “One Stop Shop” concept; residential and light commercial products from one, single source

Value added services are also required today to minimize errors and lower jobsite costs. Our program provides unique services to lower your costs and improve the overall process such as:

• Prehanging – Many light commercial and fire doors can actually be prehung• Prefinishing – Yes, we provide residential or light commercial doors and frames painted in 25 popular paint colors• Pre-Applied Hardware – Closers, exit devices, locksets, etc. – anything we carry can be applied saving valuable jobsite labor, errors, or damage

For more information on our complete Commercial Product offering, please refer to our Commercial Doors, Frames and Hardware Brochure.

Frames & Components – Easy installationBoth the EZ Flex and EZ Steel Frames are extremely durable and easy to install. Please refer to each of the frame’s specific installation instructions for more information. Below are two cross sections breaking down the important components of each frame.

Why Milliken Millwork, Inc. for Light Commercial Products?

Our EZ Flex Steel door frame is an adjustable steel frame with a kerf for weatherstripping designed for prehanging applications for residential or light commercial, new or remodeling construction. The EZ Flex Steel Door Frame is also a solution for 90 minute applications for house to garage as well as light commercial and multi-family projects where prehung door units save time and money on installation. Other specs include:

• Warnock Hersey neutral and positive pressure fire rated label, wood or steel studs

• Constructed of 18 gauge galvannealed A60 steel • Can be prehung with adjustable or ADA compliant sill • 3 adjustable frame sizes available**:

(1" adjustments, special/custom sizes are available**)

• 1-3/4" doors only • 5/8" stop height • Removal without damage to the existing wall • Includes anchoring holes and nail clearance slots for wood casing • Hinge Prep for 4" • 2-3/4" deadbolt prep and 2-3/4" adjustable T-strike prep

Options

• Special hinge or strike locations • 4-7/8" ASA strike prep • 2-1/4" Full lip strike prep • Standard threshold prep • Aluminum or Steel Casing

FIRERATING 20 MIN FIRE

RATING 90 MIN

FIRERATING 45 MIN


RATING 90 MIN

FIRERATING 45 MIN

* Main frames are 18 gauge and closure trim is 22 gauge for walls up to 7-1/2" walls over 7-1/2" is 18 gauge

** Stock sizes may vary between distribution centers

*** Hinge prep may vary between distribution centers

4-1/2"-5-1/2" 5-1/2"-6-1/2" 6-1/2"-7-1/2"

18 Gauge Steel* Adjustable Split FrameOur EZ Steel door frame is a fixed throat prefinished standard and kerf steel door frame designed for interior applications in new construction and light commercial projects such as assisted living, hotel/motel, office and residential. Other specs include:


• Constructed of 18 gauge galvannealed A60 steel • 2 Fixed frame sizes available**:

(10 other sizes varying from 4" to 7-3/8" are available as well as special/custom sizes**)

• Available for both 1-3/8" and 1-3/4" doors • 5/8" stop height • Removable without damage to existing wall • Hinge preps: 4" and 4-1/2"*** • 2-3/4" adjustable T-strike prep • Prefinished steel casing to match frame (1-1/2" width)

Options

• Special hinge or strike locations • Non-standard wall size • 4-7/8" ASA strike prep • 2-1/4" Full lip strike prep • 2-3/4" deadbolt prep • Kerf fixed throat frame option • Standard threshold prep • Prefinished aluminum casing to match frame (1-1/2" width) • Prefinished colonial casing to match frame (1-3/4" width)


RATING 90 MIN

FIRERATING 45 MIN


RATING 90 MIN

FIRERATING 45 MIN

4-5/8" 4-7/8"

18 Gauge Steel Fixed Frame

Steel FrameFLEXE Z

R

Steel FrameeE Z R

(Closed) (Open)

Steel FrameFLEXE Z

Steel FrameE Z

Installation Instructions

Place bottom of door assemble in bottom of opening. Lean top of door away from wall. Have helper caulk bottom of sill. Stand door upright, centered in opening and against wall.

Use a level to plumb hinge jamb. Secure near top corner with a drywall screw.

21Install screws in the hinge jamb, start at top, checking for plumb as you work to bottom.

3

Remove prehang clip and open door. Square header to hinge jamb. Install drywall screw in center of header.

4Close door and secure strike jamb using a 1/8"spacer for a consistant gap thru bottom - Install remaining screws in header.

5On the other side of door, slide the jamb closure trims into the jambs, starting from bottom.

6

Slide header closure trim into header. Adjust vertical and header closure trims for a good fit in top corners.

7Secure the header closure trim and jamb closure trim near the top corners. Then install the remaining screws.

8Prepare stud for deadbolt clearance. Bore a 7/8"-1" hole to a depth of 1" from face of frame. Drill a 3/8" diameter holes at corners - 1" from face of frame.

9

Clear out remaining wood with chisel. Test depth and clearance with the plastic deadbolt strike box.

10Pull weatherstrip out of the kerf near sill to allow room for caulking. Install sill extender if required.

11Allow caulk to set before reinserting weatherstrip. Caulk outside sill and closure trim to floor. For exterior, caulk frame to closure trim at jambs & header (as arrow indicates).

12

Install lockset and deadbolt per manufacturer’s instructions. Install strike plate supplied with lockset. Install deadbolt strikeplate and plastic dust box or blank plate with two #8-32 x 3/8" flat head screws - and you’re ready to go.

WARNING: The 90 minute fire rating is VOID unless this frame is installed with the closure kit.

13

25

Steel Commercial Frames fromYour Doorway to a Beautiful Home

Milliken Millwork, Inc. was one of the first to offer prefinishing services and has perfected the process through the years. We offer 25 paint choices for commercial steel doors and frames. Milliken Millwork’s affordable, convenient and premium quality paints will save you time, money and frustration.

Please note: Paint samples may vary from the actual finish. Steel doors painted a dark color with prolonged exposure to direct sunlight are excluded from warranty. For further examples of our paint options, please refer to our Paint and Stain Selection Chart.

Commercial Steel Frame Warranty

Milliken Millwork, Inc. Commercial Steel Frame Warranty

The Warranty for Milliken Millwork, Inc. Commercial Steel Frames is to the original consumer purchaser to be free from defects in material and workmanship for a periodof one (1) years from the date of purchase. All warranties for commercial use are limited to (1) years from the date of purchase.

This warranty is applicable only when the product(s) covered by it have been installed in accordance with the recommended written installation instructions of Milliken Millwork, Inc. and with established building practices, have been accorded treatment which is considered good practice in the building industry regarding handling, storage and maintenance, and have been subject to only normal use. Because Milliken Millwork, Inc. cannot control the manner in which its products are handled after leaving its premises. This warranty does not apply to the accessories of any product whatsoever. We exclude from this warranty any lock mechanisms or closer hardware, or other miscellaneous hardware, or any other door attachments, or doors which we do not manufacture or furnish. The warranty covers normal usage and excludes a product: with scratches or abrasions; that has been altered, improperly installed, abused or misused; that has been damaged by acts of nature; or that has undergone normal wear and tear.

ANY AND ALL IMPLIED WARRANTIES HERETO ARE LIMITED TO ONE (1) YEAR FROM THE DATE OF PURCHASE.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.

In the event the original consumer purchaser of any Milliken Millwork, Inc. Commercial Steel Frame product believes that the frame or any parts thereof covered by thiswarranty are defective, a letter outlining the alleged defect should be sent postage prepaid to the following address:

Milliken Millwork, Inc.Attn: Warranty Division6361 Sterling Drive N,Sterling Heights, MI 48312

Any Milliken Millwork, Inc. Commercial Steel Frames, or any parts thereof covered by this warranty which, upon inspection by an authorized representative of Milliken Millwork, Inc, are found by said representative to be defective will be repaired, replaced or, at the option of Milliken Millwork, Inc, the purchase price of the frame or part will be refunded and does not include labor, installation costs, finishing costs, or indirect or consequential damages of any nature. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you mayalso have other rights which vary from state to state.

Opening Sizes & Commercial Door Handings

Commercial Door Handings(Viewed from Keyed Side of Door)

INSWING

OUTSWING

LEFT HAND RIGHT HAND LEFT HAND ACTIVE RIGHT HAND ACTIVE

LEFT HAND REVERSE RIGHT HAND REVERSE LEFT HAND REVERSE ACTIVE RIGHT HAND REVERSE ACTIVE

Opening Sizes for Steel Frames

Steel FrameFLEXE Z

R

Steel FrameeE Z R

Steel FrameFLEXE Z

R

(Adjustable Split-Frame) Steel FrameeE Z R (Fixed Frame)

4 5/8”or 4 7/8”

Alabaster Beige Wicker Sandal Craft Paper Burgundy Redwood

Cordovan Polished Mahogany Brilliant White Fairfax Brown Sage Green Rosemary Rock Garden

Riverway Hunter Green White Gray Matters Dovetail Storm Cloud Dark Night

Naval Bronze Brown Black

Door Size Width Height (Standard Sill)

2/8 x 6/8 33" 81-1/8" 3/0 x 6/8 37" 81-1/8" 3/0 x 7/0 37" 85-1/8"

Door Size Width Height 2/8 x 6/8 33-1/4" 81" 3/0 x 6/8 37-1/4" 81" 3/0 x 7/0 37-1/4" 85" 6/0 x 6/8 73-1/4" 81" 6/0 x 7/0 73-1/4" 85"

4-1/2" Wall

1" Adjustment

0.039-0.045" main jamb

RO.050

2-3/32"

1-7/8"

15/32"

7/16"

VARIES1.94" to 4.94"

1-9/16"

CLOSED

MAIN JAMB

CLOSURE TRIMRETAINER

CLOSURE TRIM

OPEN

5/8"

1-29/32"1-29/32"

VARIES UNDER4-3/4" WALL

VARIES

5/8"

1-25/32"

4-5/8"or 4-7/8"

WALL

43

1-9/16"

UNIVERSAL APPLICATION(Interior and

Exterior Application

SLIP-ON DRYWALL(Interior

Application

ROUGH OPENINGROUGH OPENING

EZ Flex & EZ Steel Frame Profiles

22 gauge or 18 gauge Closure Trim walls up to 7-1/2" - 22 gaugewalls over 7-1/2" - 18 gauge

Prefinishing

Milliken Millwork, Inc. was one of the first to offer prefinishing services and has perfected the process through the years. We offer 25 paint choices for commercial steel doors and frames. Milliken Millwork’s affordable, convenient and premium quality paints will save you time, money and frustration.

Please note: Paint samples may vary from the actual finish. Steel doors painted a dark color with prolonged exposure to direct sunlight are excluded from warranty. For further examples of our paint options, please refer to our Paint and Stain Selection Chart.

Commercial Steel Frame Warranty

Milliken Millwork, Inc. Commercial Steel Frame Warranty

The Warranty for Milliken Millwork, Inc. Commercial Steel Frames is to the original consumer purchaser to be free from defects in material and workmanship for a periodof one (1) years from the date of purchase. All warranties for commercial use are limited to (1) years from the date of purchase.

This warranty is applicable only when the product(s) covered by it have been installed in accordance with the recommended written installation instructions of Milliken Millwork, Inc. and with established building practices, have been accorded treatment which is considered good practice in the building industry regarding handling, storage and maintenance, and have been subject to only normal use. Because Milliken Millwork, Inc. cannot control the manner in which its products are handled after leaving its premises. This warranty does not apply to the accessories of any product whatsoever. We exclude from this warranty any lock mechanisms or closer hardware, or other miscellaneous hardware, or any other door attachments, or doors which we do not manufacture or furnish. The warranty covers normal usage and excludes a product: with scratches or abrasions; that has been altered, improperly installed, abused or misused; that has been damaged by acts of nature; or that has undergone normal wear and tear.

ANY AND ALL IMPLIED WARRANTIES HERETO ARE LIMITED TO ONE (1) YEAR FROM THE DATE OF PURCHASE.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.

In the event the original consumer purchaser of any Milliken Millwork, Inc. Commercial Steel Frame product believes that the frame or any parts thereof covered by thiswarranty are defective, a letter outlining the alleged defect should be sent postage prepaid to the following address:

Milliken Millwork, Inc.Attn: Warranty Division6361 Sterling Drive N,Sterling Heights, MI 48312

Any Milliken Millwork, Inc. Commercial Steel Frames, or any parts thereof covered by this warranty which, upon inspection by an authorized representative of Milliken Millwork, Inc, are found by said representative to be defective will be repaired, replaced or, at the option of Milliken Millwork, Inc, the purchase price of the frame or part will be refunded and does not include labor, installation costs, finishing costs, or indirect or consequential damages of any nature. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you mayalso have other rights which vary from state to state.

Opening Sizes & Commercial Door Handings

Commercial Door Handings(Viewed from Keyed Side of Door)

INSWING

OUTSWING

LEFT HAND RIGHT HAND LEFT HAND ACTIVE RIGHT HAND ACTIVE

LEFT HAND REVERSE RIGHT HAND REVERSE LEFT HAND REVERSE ACTIVE RIGHT HAND REVERSE ACTIVE

Opening Sizes for Steel Frames

Steel FrameFLEXE Z

R

Steel FrameeE Z R

Steel FrameFLEXE Z

R

(Adjustable Split-Frame) Steel FrameeE Z R (Fixed Frame)

4 5/8”or 4 7/8”

Alabaster Beige Wicker Sandal Craft Paper Burgundy Redwood

Cordovan Polished Mahogany Brilliant White Fairfax Brown Sage Green Rosemary Rock Garden

Riverway Hunter Green White Gray Matters Dovetail Storm Cloud Dark Night

Naval Bronze Brown Black

Door Size Width Height (Standard Sill)

2/8 x 6/8 33" 81-1/8" 3/0 x 6/8 37" 81-1/8" 3/0 x 7/0 37" 85-1/8"

Door Size Width Height 2/8 x 6/8 33-1/4" 81" 3/0 x 6/8 37-1/4" 81" 3/0 x 7/0 37-1/4" 85" 6/0 x 6/8 73-1/4" 81" 6/0 x 7/0 73-1/4" 85"

4-1/2" Wall

1" Adjustment

0.039-0.045" main jamb

RO.050

2-3/32"

1-7/8"

15/32"

7/16"

VARIES1.94" to 4.94"

1-9/16"

CLOSED

MAIN JAMB

CLOSURE TRIMRETAINER

CLOSURE TRIM

OPEN

5/8"

1-29/32"1-29/32"

VARIES UNDER4-3/4" WALL

VARIES

5/8"

1-25/32"

4-5/8"or 4-7/8"

WALL

43

1-9/16"

UNIVERSAL APPLICATION(Interior and

Exterior Application

SLIP-ON DRYWALL(Interior

Application

ROUGH OPENINGROUGH OPENING

EZ Flex & EZ Steel Frame Profiles

22 gauge or 18 gauge Closure Trim walls up to 7-1/2" - 22 gaugewalls over 7-1/2" - 18 gauge

Prefinishing

Our EZ Flex Steel door frame is an adjustable steel frame with a kerf for weatherstripping designed for prehanging applications for residential or light commercial, new or remodeling construction. The EZ Flex Steel Door Frame is also a solution for 90 minute applications for house to garage as well as light commercial and multi-family projects where prehung door units save time and money on installation. Other specs include:


• Constructed of 18 gauge galvannealed A60 steel • Can be prehung with adjustable or ADA compliant sill • 3 adjustable frame sizes available**:

(1" adjustments, special/custom sizes are available**)

• 1-3/4" doors only • 5/8" stop height • Removal without damage to the existing wall • Includes anchoring holes and nail clearance slots for wood casing • Hinge Prep for 4" • 2-3/4" deadbolt prep and 2-3/4" adjustable T-strike prep

Options

• Special hinge or strike locations • 4-7/8" ASA strike prep • 2-1/4" Full lip strike prep • Standard threshold prep • Aluminum or Steel Casing


RATING 90 MIN

FIRERATING 45 MIN


RATING 90 MIN

FIRERATING 45 MIN

* Main frames are 18 gauge and closure trim is 22 gauge for walls up to 7-1/2" walls over 7-1/2" is 18 gauge

** Stock sizes may vary between distribution centers

*** Hinge prep may vary between distribution centers

4-1/2"-5-1/2" 5-1/2"-6-1/2" 6-1/2"-7-1/2"

18 Gauge Steel* Adjustable Split FrameOur EZ Steel door frame is a fixed throat prefinished standard and kerf steel door frame designed for interior applications in new construction and light commercial projects such as assisted living, hotel/motel, office and residential. Other specs include:


• Constructed of 18 gauge galvannealed A60 steel • 2 Fixed frame sizes available**:

(10 other sizes varying from 4" to 7-3/8" are available as well as special/custom sizes**)

• Available for both 1-3/8" and 1-3/4" doors • 5/8" stop height • Removable without damage to existing wall • Hinge preps: 4" and 4-1/2"*** • 2-3/4" adjustable T-strike prep • Prefinished steel casing to match frame (1-1/2" width)

Options

• Special hinge or strike locations • Non-standard wall size • 4-7/8" ASA strike prep • 2-1/4" Full lip strike prep • 2-3/4" deadbolt prep • Kerf fixed throat frame option • Standard threshold prep • Prefinished aluminum casing to match frame (1-1/2" width) • Prefinished colonial casing to match frame (1-3/4" width)


RATING 90 MIN

FIRERATING 45 MIN


RATING 90 MIN

FIRERATING 45 MIN

4-5/8" 4-7/8"

18 Gauge Steel Fixed Frame

Steel FrameFLEXE Z

R

Steel FrameeE Z R

(Closed) (Open)

Steel FrameFLEXE Z

Steel FrameE Z

Installation Instructions

Place bottom of door assemble in bottom of opening. Lean top of door away from wall. Have helper caulk bottom of sill. Stand door upright, centered in opening and against wall.

Use a level to plumb hinge jamb. Secure near top corner with a drywall screw.

21Install screws in the hinge jamb, start at top, checking for plumb as you work to bottom.

3

Remove prehang clip and open door. Square header to hinge jamb. Install drywall screw in center of header.

4Close door and secure strike jamb using a 1/8"spacer for a consistant gap thru bottom - Install remaining screws in header.

5On the other side of door, slide the jamb closure trims into the jambs, starting from bottom.

6

Slide header closure trim into header. Adjust vertical and header closure trims for a good fit in top corners.

7Secure the header closure trim and jamb closure trim near the top corners. Then install the remaining screws.

8Prepare stud for deadbolt clearance. Bore a 7/8"-1" hole to a depth of 1" from face of frame. Drill a 3/8" diameter holes at corners - 1" from face of frame.

9

Clear out remaining wood with chisel. Test depth and clearance with the plastic deadbolt strike box.

10Pull weatherstrip out of the kerf near sill to allow room for caulking. Install sill extender if required.

11Allow caulk to set before reinserting weatherstrip. Caulk outside sill and closure trim to floor. For exterior, caulk frame to closure trim at jambs & header (as arrow indicates).

12

Install lockset and deadbolt per manufacturer’s instructions. Install strike plate supplied with lockset. Install deadbolt strikeplate and plastic dust box or blank plate with two #8-32 x 3/8" flat head screws - and you’re ready to go.

WARNING: The 90 minute fire rating is VOID unless this frame is installed with the closure kit.

13

25

Steel Commercial Frames fromYour Doorway to a Beautiful Home

Slip-On Drywall Application

(Interior Application)

Universal Application(Interior &

Exterior Application)


Steel Casing - 22 Gagesteel casing standard; aluminium, Colonial steel or decorative woodoptional

Casing CornerAlignment tabholds miters tight

ClosureBase

Specifically DesignedTab SystemAligns and holdsbase headerand closure

Plate SystemExclusive systemadjusts to a varietyof wall sizes

HingeReinforcements11 gage plates arewelded to frame; fits specified hinges

Steel FrameeE Z R

Steel FrameFLEXE Z

R

ADJUSTABLE SPLIT-FRAME FIXED FRAME

Casing CornerAlignment tab holds miters tight

Steel Casing - 22 Gagesteel casing; aluminium,Colonial steel or decorativewood optional


SpecificallyDesignedHeaderAligns and holdsjambs in properposition

HingeReinforcements11 gage plates are welded to frame; fitsspecified hinges

Steel FrameFLEXE Z

Steel FrameE ZInstallation Instructions

Place header over wall, centering header in opening.

If necessary, fasten temporarily with nails or screws

1Hold hinge jamb at an angle, slide jamb over wall, position-

ing the door stop between header tabs and the header

door stop.

2 3 4 5Repeat step 2 for the

strike jambRemove nails or screws used to hold the header. Pull down on

header so that the jambs rest on finished floor. If the finished floor is not installed, place a shim of the same thickness as finished floor, under each jamb. Insert

one screw or nail at top of hinge jamb. Install door and close

in opening.

Using door as a template adjust frame to door so that clearances between door

and the frame are equal and between 1/16" - 1/8". If a door is not available square

and plumb the frame using a carpenter’s square and level. Fasten frame starting at top

of the hinge jamb with recommended fasteners

To apply wood casings, hold casing against frame and mark the location of each oval nailing slot (see figure below). Then place the edge of the casing 1/4" from the inside edge of the frame. Locate 6d finishing nails at locations marked, 1/2" from inner edge of the scaling. This will allow nailing through the oval slot.

6

Header

StrikeJamb

HingeJamb

FinishedFloor

Nail/Screw Holes

Casing Clip Screw Holes

Oval Clearance Slots for wood casing nails

ROUGHOPENINGWIDTH

Nominal door width + 1-1/4"

ROUGHOPENINGHEIGHT

Net frame height+ 1/2"-3/4"

Wall Construction Wood Studs and DrywallRecommended Fasteners:

1-1/4" (min.) Drywall Screws Coarse thread or 6d common nails

Wall Construction Metal Studs and DrywallRecommended Fasteners:

1-1/4" (min.) Type “S” Bugle Head Self-Tapping Screws

1 6

Commercial trends today require the strength and durability of commercial products but the warmth and comfort or residential styling. Our blended inventory reflects these trends and allows us to respond quickly. Sourcing light commercial products can be complicated, time consuming and very frustrating. Our program is designed to simplify that process.

It is driven by:

• Simplicity – Make it easy for you, your customer and Milliken Millwork• Speed – Light Commercial Products delivered at residential speeds• Convenience – “One Stop Shop” concept; residential and light commercial products from one, single source

Value added services are also required today to minimize errors and lower jobsite costs. Our program provides unique services to lower your costs and improve the overall process such as:

• Prehanging – Many light commercial and fire doors can actually be prehung• Prefinishing – Yes, we provide residential or light commercial doors and frames painted in 25 popular paint colors• Pre-Applied Hardware – Closers, exit devices, locksets, etc. – anything we carry can be applied saving valuable jobsite labor, errors, or damage

For more information on our complete Commercial Product offering, please refer to our Commercial Doors, Frames and Hardware Brochure.

Frames & Components – Easy installationBoth the EZ Flex and EZ Steel Frames are extremely durable and easy to install. Please refer to each of the frame’s specific installation instructions for more information. Below are two cross sections breaking down the important components of each frame.

Why Milliken Millwork, Inc. for Light Commercial Products?

Steel FrameFLEXEZ

R


ADJUSTABLE & FIXED STEEL DOOR FRAMES

Steel FrameEZ R


MILLIKEN MILLWORK, INC. LOCATIONS

Michigan (HQ)6361 Sterling Drive NorthSterling Heights, MI 48312

586.264.0950800.686.9218

Fax: 586.264.5430

Ohio400 Circle Freeway Drive

Cincinnati, OH 45246513.874.6771800.215.3770

Fax: 513.870.0242

Pennsylvania172 Plummer RoadSidman, PA 15955

814.487.7800800.452.0251

Fax: 814.487.7850

North Dakota1358 38th Street North

Fargo, ND 58102701.282.5700800.342.4735

Fax: 701.282.5702

South Dakota1820 E. 54th Street North

Sioux Falls, SD 57104605.336.1910800.843.0076

Fax: 605.335.1324

Pennsylvania1275 Manheim PikeLancaster, PA 17601

717.299.2361800.360.2364

Fax: 717.293.9249

(Sidman, PA) (Lancaster, PA)

For more information on Milliken Millwork, Inc. products and services, please visit:

www.millikenmillwork.com

Part No. 110299 • 5/13

MILLIKEN MILLWORK, INC. LOCATIONS EZ FLEX EZ Steel Framewaynecomputer.com/sites/lodilumber/wp-content/uploads/2014/07/... · To apply wood casings, hold casing against frame and mark

Documents