1 MIGATRONIC ACCESSORIES
1
MIGATRONIC ACCESSORIES
2 3
Personal safety
Pressure regulators
Remote controls
Chemicals
Tools
Fume extraction
Automotive equipment
Quick release fittings
Cables/plugs and holders
Electrode ovens
4 - 19
20 - 22
23
23
24
25
26- 29
30- 31
32 - 34
35
2
Have you chosen the right accessories?
Personal safetyMigatronic personal safety products have been produced specifically for the welding industry and are marked, tested, and sub-sequently approved according to accepted standards. All of Migatronic’s personal safety products carry CE qualification.
Pressure regulatorsMigatronic offers a new and complete range of pressure regulators. Migatronic pressure regulators in the 200 range cover all requirements, and the incorporation of a gas saver regulator will allow you to save up to 60% of your gas consumption.
Protector welding helmets The Migatronic Protector welding helmets are made of lightweight and robust mate-rials using advanced moulding techniques. The design provides optimum protection of the welder’s head, chin and ears.
Automotive equipmentSince its establishment back in 1970, Mi-gatronic has been engaged in optimising welding equipment for the automotive trade. More than 40 years’ experience that we would like to share with you.
Range of accessoriesShould you not find the required item in this catalogue, please contact Migatronic.
4 5
Welding mat Leather and split leather.Length 520 mm, width 330 mm.Article no. ...................81930010
Personal safety
Welding gloves MIG/MAGLuxury MIG/MAG welding gloves. Very comfortable and soft heat-resistant leather gloves with internal Kevlar stitching.Article no. ...................81930038
Welding gloves Strong welding gloves made of cowhide. Upper side of split leather and index finger of hide. Size 11.Article no. ...................81930034
Welding apronWelding apron in split leather with riveted nylon strap and click buckle.Length 900 mm, width 580 mm.Article no....................81930015
Skirt apronSkirt apron in split leather with riveted nylon strap and click buckle.Length 500 mm, width 580 mm.Article no. ...................81930018
Welding jacketLightweight, protective weld-ing jacket in fire-resistant fabric. Designed specifically for the welding industry. One-size.Article no. ...................81930043
LeggingsLegging in split leather with Velcro fastening. Sets of two.Article no. ...................81930036
Welding hoodWelding hood in split leather for protection of head and back of the head during weld-ing.Article no....................81910117
Welding hoodWelding hood in fire-resistant fabric for protection of head, neck and shoulders against weld spatter, grinding Art.icles and radiation.Article no....................81930042
Neck protectionNeck protection designed spe-cifically for Migatronci welding helmet. Protects against weld spatter and radiation.Article no. ...................81930041
SleevesLightweight set of sleeves with elastic and buttons for shoul-der fixing. Protects against grinding Art.icles and weld spatter.Article no. ...................81930040
Welding gloves TIGWelding gloves in a soft quality with a 14 cm cuff in split leather sewn with Kevlar. Perfect for quality welding. Size 9 and 109: Article no. .............. 81930023 10: Article no. ............ 81930024
Welding gloves TIGTIG welding gloves in a soft quality; cuffs in cowhide; sewn with Kevlar; sizes 9/10/11.9: Article no. .............8193002510: Article no. .............8193002611: Article no. .............81930027
Fibreglass welding helmet *Fibreglass welding helmet with flip-up frontpiece.Welding/safety glass 60 x 110 mm.Observation glass 64 x 101 mmArticle no. ...................81910180
Headband for welding helmetArticle no. ...................81910100
Polypropylene welding helmetPolypropylene welding helmet with clear glass observation strip.Welding/safety glass 60 x 110 mm. Observation glass 22 x 108 mmArticle no. ...................81910090
Headband for welding helmetArticle no. ...................81910100
Fibreglass welding helmetFibreglass welding helmet with clear glass observation strip.Welding/safety glass 60 x 110 mm. Observation glass 22 x 108 mmArticle no. ...................81910001
Headband for welding helmetArticle no. ...................81910100
Welding/grinding goggles *Combined welding/grinding goggles with round carborock glass. Fixed grinding goggles and flip-up welding glasses. Glasses can be changed as required.Article no. ...................81912005
Grinding shieldStandard grinding shield with pivot fittings in headband.Article no. ................. 81910007
Visor for grinding shieldArticle no. ................. 81910008
Sweat frontletSweat frontlet of imitation leather for fixing on headband.Sets of two.Article no. ...................81910119
Welding/cutting gogglesWelding/cutting goggles with side protection and leather head strap.DIN 6: Article no. ...................81912305
HandshieldSmall green PVC hand shield.Article no. ...................81910144
* = Special order item
Welding gloves MIG/MAGWelding gloves in a soft quality; top side and cuffs in cowhide; sewn with Kevlar; unlined; size 10.Article no. ...................81930033
Protector Focus welding helmet Automatic filter (ADF); external DIN adjustment 9-13; adjust-able delay; visual field 42 x 96 mm; adjustable sensitivity; solar battery.Article no. .................81910597
Green welding helmetEconomy welding helmet with clear glass observation strip.Article no. .................81910010
Headband for welding helmetArticle no. ...................81910100
6 7
Personal safety
You can adjust the sensitivity of the arc detection for unsurpassed switching reliability.
Magnification made easy. The magnify-ing lens holder is built into the welding filter, making lens installation easier and more secure.
Seven user selectabledark shades for most types of arc welding.
The tack welding comfort mode uses a shade 5 light state.
The Delay function allows you to set the dark-to-light switching time.Conforms to European Standard
379 for eye protection for wel-ders, as well as other national standards (USA, Canadian, Aus-tralian — to name a few).
The Speedglas 9100 Series includes three auto-darkening filters: regular, large, and extra-large viewing area.
The big, 17 x 10 cm clear protective visor is curved, increasing your peripheral vision.
Exhaled air is channelled out via side exhaust vents.
100% compatible with our top-of-the-line series of 3M™ Speedglas™ 9100 Welding Filters.
Meets the requirements of mechanical resistance to high speed Art.icles accor-ding to EN 175:B and at extremes of temperatures, -5°C to +55°C, per EN 166:BT.
High-comfort Speed-glas 9100 Headband.
SideWindows: Shade 5 filters that widen your field of vision.
3M™ Speedglas™ 9100 FX Welding Shield
Introducing the Speedglas 9100 FX Welding Shields, a flip-up combination of an auto-darkening welding shield and a protective visor. Not only is the viewing area larger compa-
red to previous models, we totally redesigned the geome-try of the shield for a wider field of view in all directions.
Wider Field of View with Flip-Up Front
• The 3M™ Speedglas™
9100XX Filter is 30%
larger than any other
Speedglas welding filter.
• Seven dark shades,
including 9–13 (variable),
5-8 for gas welding/
cutting, and 8 for micro-
plasma or low-amp TIG.
• Outstanding low-amp TIG
performance, even on
settings as low as 1 amp.
• Any shade can be “locked-
in.” For example, you
can lock-in the light state
shade 3 for grinding with
9100 standard.
• Exclusive, innovative tack
welding comfort mode
which can help reduce eye
strain.Excellent Optics, Bigger Views
52 80 058191066481910665
8191066652 70 0052 70 70
50 00 058191066750 00 25
50 11 9050 18 90
53 20 00
53 20 15
53 10 00
81910660
16 90 05
16 90 10
16 80 15
53 61 00
53 62 00
53 60 00
50 11 00 / 50 18 00
53 30 00
81910659
8191065481910655819106568191065781910658
Art. No Description Art. No Description Art. No Description
3M™ Speedglas™ 9100 Welding Shield
Accessories and spare parts
50 11 05 Speedglas 9100 Welding Shield without SideWindows, with 9100V Filter.
50 11 15 Speedglas 9100 Welding Shield without SideWindows, with 9100X Filter.
50 11 25 Speedglas 9100 Welding Shield without SideWindows, with 9100XX Filter.
50 18 05 Speedglas 9100 Welding Shield with SideWindows and 9100V Filter.
81910610 Speedglas 9100 Welding Shield with SideWindows and 9100X Filter.
50 18 25 Speedglas 9100 Welding Shield with SideWindows and 9100XX Filter.
* Please use Art. No 50 18 90 when ordering replacement SideWindows.
Art. No Description Art. No Description Art. No Description
16 80 15 Comfort sweatband, pkg of 3.16 90 05 Head protection, black.16 90 10 Neck protection, black.81910659 Hood, black/grey.81910654 Magnifying lens 1.0.81910655 Magnifying lens 1.5.81910656 Magnifying lens 2.0.81910657 Magnifying lens 2.5.81910658 Magnifying lens 3.0.81910660 Battery, pkg of 2.50 00 05 Speedglas 9100V Welding Filter,
variable shade 5, 8, 9–13.81910667 Speedglas 9100X Welding Filter,
variable shade 5, 8, 9–13.50 00 25 Speedglas 9100XX Welding Filter,
variable shade 5, 8, 9–13.
50 11 00 9100 Welding Shield without SideWindows, with headband.
50 11 90 9100 Welding Shield without SideWindows, without headband.
50 18 00 9100 Welding Shield with SideWindows and headband.
50 18 90* 9100 Welding Shield with SideWindows, without headband.
81910666 Outer protection plate standard, pkg of 10.
52 70 00 Outer protection plate extra scratch resistant, pkg of 10.
52 70 70 Outer protection plate heat resistant pkg of 10.
52 80 05 Inner cover plate for 9100V Filter, pkg of 5. Plate marking 117x50.
81910664 Inner cover plate for 9100X Filter, pkg
of 5. Plate marking 117x61.81910665 Inner cover plate for 9100XX Filter,
pkg of 5. Plate marking 117x77.53 10 00 Battery holder, pkg of 2.53 20 00 Heat-reflecting silver front.53 20 15* SideWindows cover plate, 2 pairs.53 30 00 Speedglas 9100 headband with
assembly parts.53 60 00 Pivot mechanism, left and right. 53 61 00 Headband front Art..53 62 00 Headband back Art..
Six-figure Art. No. = Special order item
Personal safety
8 9
81910659
16 80 15
53 61 00
53 62 00
53 60 00
53 30 00
81910679
81910680
16 90 10
8191067781910678
54 18 90
53 20 16
8191066652 70 0052 70 70
50 00 058191066750 00 25
53 10 00
81910660
54 05 00
54 18 00
8191065481910655819106568191065781910658
52 80 058191066481910665
3M™ Speedglas™ 9100 FX Welding Shield
54 18 05 Speedglas 9100 FX Welding Shield with SideWindows and 9100V Filter.
81910620 Speedglas 9100 FX Welding Shield with SideWindows and 9100X Filter.
54 18 25 Speedglas 9100 FX Welding Shield with SideWindows and 9100XX Filter.
16 80 15 Comfort sweatband, pkg of 3.81910679 Head protection (small).81910680 Neck protection (large).81910659 Hood, black/grey.81910654 Magnifying lens 1.0.81910655 Magnifying lens 1.5.81910656 Magnifying lens 2.0.81910657 Magnifying lens 2.5.81910658 Magnifying lens 3.0.81910660 Battery, pkg of 2.50 00 05 Speedglas 9100V Welding Filter,
variable shade 5, 8, 9-13.81910667 Speedglas 9100X Welding Filter,
variable shade 5, 8, 9-13.
50 00 25 Speedglas 9100XX Welding Filter, variable shade 5, 8, 9-13.
81910677 Visor plate standard, pkg of 5.81910678 Visor plate anti-fog, pkg of 5.81910666 Outer protection plate, standard,
pkg of 10.52 70 00 Outer protection plate, extra
scratch resistant, pkg of 10.52 70 70 Outer protection plate, heat
resistant pkg of 10.52 80 05 Inner cover plate for 9100V Filter,
pkg of 5. Plate marking 117x50.81910664 Inner cover plate for 9100X Filter,
pkg of 5. Plate marking 117x61.
81910665 Inner cover plate for 9100XX Filter, pkg of 5. Plate marking 117x77.
53 10 00 Battery holder, pkg of 2.53 20 16 SideWindows cover plate, 2 pairs.53 30 00 Speedglas 9100 Series Headband,
with assembly parts.53 60 00 Pivot mechanism, left and right.53 61 00 Headband front Art..53 62 00 Headband back Art..54 18 00 Speedglas 9100 FX shield, without
welding filter, with headband.54 18 90 Speedglas 9100 FX shield, without
welding filter, without headband.54 05 00 Front cover kit.
Art. No Description Art. No Description Art. No Description
Art. No Description Art. No Description Art. No Description
Accessories and spare parts
3M™ Speedglas™ SL Welding Shield
81910630
8191066081910675
16 40 05
81910668 72 70 00
8191066216 76 0016 80 0081910663
70 50 10
70 60 00
81910659
16 90 01
73 10 00
8191065242 80 05
70 11 90
70 00 20
70 62 02
8191065481910655819106568191065781910658
16 40 05 Ear and neck protection in leather (3 parts).
81910662 Sweatband, towelling, purple, pkg of 2.
16 76 00 Sweatband, towelling, pkg of 20.16 80 00 Sweatband, leather.81910663 Sweatband, fleecy cotton.16 90 01 Neck protection black/grey.81910659 Hood black/grey.81910654 Magnifying lens 1.0.81910655 Magnifying lens 1.5.
81910656 Magnifying lens 2.0.81910657 Magnifying lens 2.5.81910658 Magnifying lens 3.0.81910675 Holder for magnifier.81910660 Battery, pkg of 2.81910652 Inner cover plate (42 x 91 mm), pkg
of 5. Plate marking 42 02 00.42 80 05 81910652, pkg of 200.70 00 20 Speedglas SL Welding Filter, variable
shade 8-12.81910630 Speedglas SL Welding Shield. with
welding filter, variable shade 8– 12.
70 11 90 Welding shield, without headband.70 50 10 Headband with assembly parts.70 60 00 Assembly parts for headband.70 62 02 Filter locking frame, pkg of 2.81910668 Outer protection plate, standard,
pkg of 5. Plate marking 030226.72 70 00 Outer protection plate, scratch
resistant, pkg of 5. Plate marking 030248.
73 10 00 Battery cover.
Art. No Description Art. No Description Art. No Description
Six-figure Art. No. = Special order item
Personal safety
10 11
81910659
16 90 01
16 40 05
8191065177 70 0077 70 70
8191065242 80 2042 80 40
75 00 1075 00 1175 00 20
81910653
81910654 thru 58
81910660
73 10 00
16 50 1516 50 25
16 50 30
75 11 9075 12 90 75 13 9075 14 9075 15 9075 16 9075 17 9075 18 9075 19 9075 20 9075 21 90
75 11 00
8191066216 76 0016 80 0081910663
70 50 10
70 60 00
75 13 20
77 20 0077 20 01
3M™ Speedglas™ 100 Series Welding Shields
16 40 05 Ear and neck protection in leather. 16 50 15 Headband with assembly parts.16 50 25 Headband 1 UL with assembly parts.16 60 30 Assembly parts for headband.81910662 Sweatband, towelling purple, pkg
of 2.16 76 00 Sweatband, towelling purple, pkg
of 20.16 80 00 Sweatband, leather.81910663 Sweatband, fleecy cotton.16 90 01 Neck protection, black/grey.81910659 Hood black/grey81910653 Holder for magnifier.81910654 Magnifying lens 1.0.81910655 Magnifying lens 1.5.81910656 Magnifying lens 2.0.81910657 Magnifying lens 2.5.81910658 Magnifying lens 3.0.81910660 Battery, pkg of 2.81910652 Inner cover plate, pkg of 5.
Plate marking 42 02 00.42 80 20 Inner cover plate, +1 shade,
pkg of 5.
42 80 40 Inner cover plate, +2 shade, pkg of 5. 70 50 10 Comfort Headband with assembly
parts.70 60 00 Assembly parts for headband.73 10 00 Battery cover. 75 00 10 Speedglas 100S-10 Welding Filter,
single shade 10.75 00 11 Speedglas 100S-11 Welding Filter,
single shade 11.75 00 20 Speedglas 100V Welding Filter,
variable shade 8-12.75 11 00 Welding shield black, without
welding filter with headband.75 11 90 Welding shield black, without
welding filter, without headband.75 12 90 Welding shield Blaze, without
welding filter, without headband.75 13 90 Welding shield Tribal, without
welding filter, without headband.75 14 90 Welding shield Chrome, without
welding filter, without headband.75 15 90 Welding shield Mechanical skull,
without welding filter, without
headband.75 16 90 Welding shield Trojan Warrior,
without welding filter, without headband.
75 17 90 Welding shield Aces High, without welding filter, without headband.
75 18 90 Welding shield Steel Rose, without welding filter, without headband.
75 19 90 Welding shield Skull Jewels, without welding filter, without headband.
75 20 90 Welding shield Wild n’ Pink, without welding filter, without headband.
75 21 90 Welding shield Steel Eyes, without welding filter, without headband.
77 20 00 Front frame, silver.77 20 01 Front frame, black.81910651 Outer protection plate, standard,
pkg of 10.77 70 00 Outer protection plate, scratch
resistant, pkg of 10.77 70 70 Outer protection plate, heat
resistant, pkg of 10.
Art. No Description
Art. No Description Art. No Description
Accessories and spare parts
75 11 10 Speedglas 100 Welding Shield Black with 100S-10 Filter.
75 11 11 Speedglas 100 Welding Shield Black with 100S-11 Filter.
81910600 Speedglas 100 Welding Shield Black with 100V Filter.
75 12 20 Speedglas 100 Welding Shield Blaze, with 100V Filter.
75 13 20 Speedglas 100 Welding Shield Tribal with 100V Filter.
75 14 20 Speedglas 100 Welding Shield Chrome with 100V Filter.
75 15 20 Speedglas 100 Welding Shield Mechanical skull with 100V Filter.
75 16 20 Speedglas 100 Welding Shield Trojan Warrior with 100V Filter.
75 17 20 Speedglas 100 Welding Shield Aces high with 100V Filter.
75 18 20 Speedglas 100 Welding Shield Steel Rose with 100V Filter.
75 19 20 Speedglas 100 Welding Shield Skull Jewels with 100V Filter.
75 20 20 Speedglas 100 Welding Shield Wild ’n’ Pink with 100V Filter.
75 21 20 Speedglas 100 Welding Shield Steel Eyes with 100V Filter.
Art. No Description Art. No Description Art. No Description
83 50 05
83 76 21
83 73 00
83 25 10
83 25 30 / 85 25 31
83 50 00 83 31 01
83 80 30 83 60 00 83 60 10 83 70 10 83 76 20
83 80 20
83 71 10 83 71 20
83 32 06
83 70 00
83 72 42
83 72 4283 75 42
83 40 0083 40 0583 40 0883 40 1083 40 1283 40 1383 40 1683 40 17
83 40 18
83 40 16
53 35 05
53 35 06
79 01 01 83 50 20
3M™ Adflo™ Powered Air Respirator
83 25 10 Adflo Respirator with self-adjusting breathing tube QRS, adapter (53 35 06), airflow indicator, prefilter, spark arrestor, Art.icle filter and
battery.
83 25 30 Adflo Respirator with self-adjusting breathing tube QRS, breathing tube adapter, airflow indicator, prefilter, spark arrestor, Art.icle filter, battery,
belt and charger.83 25 31 Adflo Respirator as in 83 25 30, but
with heavy-duty battery.
Art. No Description Art. No Description Art. No Description
Accessories and spare parts
53 35 05 Adapter for non-QRS breathing tubes when using Speedglas 9100 Series welding shields.
53 35 06 Adapter for QRS breathing tubes when using Speedglas 9000 Series welding shields.
79 01 01 Product carry bag. 83 31 01 Battery charger. 83 32 06 6-station battery charger kit.83 40 00 Breathing tube, lightweight, non-
QRS.83 40 03 Replaced by 83 40 18.83 40 05 Breathing tube, heavy-duty rubber,
non-QRS.83 40 08 Breathing tube with silencer, non-
QRS..83 40 10 Breathing tube, lightweight, 25 cm
longer, non-QRS.
83 40 12 Breathing tube, double length, non-QRS.
83 40 13 Breathing tube, lightweight, triple length, non-QRS.
83 40 16 Breathing tube, self-adjusting (52,5 to 85 cm), with QRS connection.
83 40 17 Breathing tube, heavy-duty rubber, with QRS connection.
83 40 18 Flame resistant breathing tube cover.
83 45 00 Gasket for non-QRS breathing tubes, not shown, pkg of 5.
83 50 00 Belt.83 50 05 Front Art., belt.83 50 10 Quick connection for belt (not
shown).83 50 20 Braces.83 60 00 Spark arrestor.
83 60 10 Prefilter, pkg of 5.83 60 80 Prefilter, pkg of 80.83 70 00 Storage bag.83 70 10 Art.icle filter P SL.83 70 20 Art.icle filter P SL, pkg of 20.83 70 80 Art.icle filter P SL, pkg of 80.83 71 10 Odour filter.83 71 20 Odour filter pad.83 72 42 Gas filter A1B1E1.83 73 00 Gas filter kit: A1B1E1 filter
and Heavy-Duty battery.83 75 42 Gas filter A2.83 76 20 Battery (standard).83 76 21 Battery Heavy-Duty.83 80 20 Airflow indicator.83 80 30 Filter cover.
Art. No Description Art. No Description Art. No Description
Six-figure Art. No. = Special order item
Personal safety
12 13
53 35 06
There is a new type of supplied air breathing tube, named Breathing Tube QRS. QRS stands for Quick Release Swivel, which enables one-handed con-nection and release. Article no. .....................85 30 64
3M™ Fresh-air™ C Supplied Air Regulator
85 20 16
85 21 1685 20 10
80 60 00
85 21 10
85 70 00
85 10 11
85 10 10
85 90 04
85 90 01
ACU-02
ACU-01
85 41 10
85 21 56
85 21 55
85 21 53
85 30 64
85 21 58
85 30 62
53 35 06 Adapter for QRS breathing tubes when using Speedglas 9000 Series welding shields.
80 60 00 Comfort belt.85 10 10 Y-coupling SR49/SR79.85 10 11 Coupling SR49.85 21 53 Quick connection CEJN 2201/4.85 21 55 Nipple regulator CEJN 342.85 21 56 Quick connection CEJN 342.85 21 58 Spare Art. nipple breathing tube
CEJN 220 1/4.85 30 62 Breathing tube (transparent) with
nipple, without QRS Connection. 85 30 64 Breathing tube (blue) with nipple
and QRS Connection. 85 41 10 Approved air supply tube 10 m
green. Other lengths according to quotation.
85 70 00 Storage bag.85 90 01 Filter element 292 SR49/SR79.
85 90 04 Gasket kit SR49/SR79 Housing.ACU-01 3M Aircare Filtration System
(wall mounted).ACU-02 3M Aircare Filtration System
(stand alone).
Art. No Description Art. No Description Art. No Description
Accessories and spare parts
85 20 10 Fresh-air C Regulator, without belt, without breathing tube.
85 20 16 Fresh-air C Regulator with breathing tube QRS (85 30 64), comfort belt and storage bag.
85 21 10 Fresh-air C Regulator with storage bag, without belt, without breathing tube.
85 21 16 Fresh-air C Regulator with breathing tube QRS (85 30 64) and storage bag, without belt.
Art. No Description Art. No Description Art. No Description
The blue breathing tube!
* Please use Art. No 56 08 90 when new SideWindows are required.
8191065481910655819106568191065781910658
52 80 058191066481910665
8191066652 70 0052 70 70
50 00 058191066750 00 25
53 20 00
53 20 15
53 10 00
81910660
16 90 05
16 90 10
16 80 15
53 61 00
53 62 00
53 60 00
56 28 00
53 30 00
81910659
56 08 90
53 41 0053 37 00
53 35 05
16 80 15 Comfort sweatband, pkg of 3.16 90 05 Head protection, black.16 90 10 Neck protection, black.81910659 Hood, black/grey.81910654 Magnifying lens 1.0.81910655 Magnifying lens 1.5.81910656 Magnifying lens 2.0.81910657 Magnifying lens 2.5.81910658 Magnifying lens 3.0.81910660 Battery, pkg of 2.50 00 05 Speedglas 9100V Welding Filter.81910667 Speedglas 9100X Welding Filter.50 00 25 Speedglas 9100XX Welding Filter.81910666 Outer protection plate, standard,
pkg of 10.52 70 00 Outer protection plate, extra
scratch resistant, pkg of 10.
52 70 70 Outer protection plate, heat resistant pkg of 10.
52 80 05 Inner cover plate for 9100V Filter, pkg of 5. Plate marking 117x50.
81910664 Inner cover plate for 9100X Filter, pkg of 5. Plate marking 117x61.
81910665 Inner cover plate for 9100XX Filter, pkg of 5. Plate marking 117x77.
53 35 05 Welding shield adapter when using old type of breathing tube (non-QRS).
53 10 00 Battery holder, pkg of 2.53 20 00 Heat-reflecting silver front.53 20 15* SideWindows cover plate, 2 pairs.53 30 00 Speedglas 9100 Headband with
assembly parts.53 37 00 Air duct.
53 41 00 Face seal.53 60 00 Pivot mechanism, left and right. 53 61 00 Headband front Art..53 62 00 Headband back Art..56 08 90 9100 Air Welding Shield without
headband, without air duct, without face seal, without filter.
56 28 00 9100 Air Welding Shield, without welding filter.
Art. No Description Art. No Description Art. No Description
Accessories and spare parts
3M™ Speedglas™ 9100 Air Welding Shield for Respiratory Protection
56 66 00 Speedglas 9100 Air Welding Shield without welding filter, with Adflo Respirator.
56 66 05 Speedglas 9100 Air Welding Shield with 9100V Filter, with Adflo Respirator.
56 66 15 Speedglas 9100 Air Welding Shield with 9100X Filter, with Adflo Respirator.
56 66 25 Speedglas 9100 Air Welding Shield with 9100XX Filter, with Adflo Respirator.
56 88 00 Speedglas 9100 Air Welding Shield without welding filter, with Fresh-air C Regulator.
56 88 05 Speedglas 9100 Air Welding Shield with 9100V Filter, with Fresh-air C Regulator.
56 88 15 Speedglas 9100 Air Welding Shield with 9100X Filter, with Fresh-air C Regulator.
56 88 25 Speedglas 9100 Air Welding Shield with 9100XX Filter, with Fresh-air C Regulator.
Art. No Description Art. No Description Art. No Description
Six-figure Art. No. = Special order item
Personal safety
14 15
53 60 00
81910659
16 80 15
53 61 00
53 62 00
53 30 00
16 90 10
8191065481910655819106568191065781910658
52 80 058191066481910665
8191066652 70 0052 70 70
50 00 058191066750 00 25
54 28 00
53 35 05
53 50 00
81910679
53 35 00
8191067781910678
54 05 0053 20 1654 18 90
81910680
81910681
53 10 00
81910660
3M™ Speedglas™ 9100 FX Air Welding Shield for Respiratory Protection
16 80 15 Comfort sweatband, pkg of 3.81910679 Head protection, (small).81910680 Neck protection, (large).81910659 Hood, black/grey.81910654 Magnifying lens 1.0.81910655 Magnifying lens 1.5.81910656 Magnifying lens 2.0.81910657 Magnifying lens 2.5.81910658 Magnifying lens 3.0.81910660 Battery, pkg of 2.50 00 05 Speedglas 9100V Welding Filter.81910667 Speedglas 9100X Welding Filter.50 00 25 Speedglas 9100XX Welding Filter.81910677 Visor plate, standard, pkg of 5.81910678 Visor plate, anti-fog, pkg of 5.
81910666 Outer protection plate, standard, pkg of 10.
52 70 00 Outer protection plate, extra scratch resistant, pkg of 10.
52 70 70 Outer protection plate, heat resistant, pkg of 10.
52 80 05 Inner cover plate for 9100V Filter, pkg of 5. Plate marking 117x50.
81910664 Inner cover plate for 9100X Filter, pkg of 5. Plate marking 117x61.
81910665 Inner cover plate for 9100XX Filter, pkg of 5. Plate marking 117x77.
53 10 00 Battery holder, pkg of 2.53 20 16 SideWindows cover plate, 2 pairs.53 30 00 Speedglas 9100 Series Headband,
with assembly parts.
53 35 05 Adapter for non-QRS breathing tubes when using Speedglas 9100 Series welding shields.
53 35 00 Air duct.81910681 Face seal.53 50 00 Air deflector.53 60 00 Pivot mechanism, left and right. 53 61 00 Headband, front Art..53 62 00 Headband, back Art..54 18 90 Speedglas 9100 FX Air Welding
Shield, without filter, without face seal, without air duct, without headband.
54 28 00 Speedglas 9100 FX Air Welding Shield without welding filter, with headband.
54 05 00 Front cover kit.
Art. No Description Art. No Description Art. No Description
Accessories and spare parts
54 66 00 Speedglas 9100 FX Air Welding Shield, without welding filter, with Adflo Respirator.
54 66 05* Speedglas 9100 FX Air Welding Shield with 9100V Filter, with Adflo Respirator.
81910625* Speedglas 9100 FX Air Welding Shield with 9100X Filter, with Adflo Respirator.
54 66 25* Speedglas 9100 FX Air Welding Shield with 9100XX Filter, with Adflo Respirator.
54 88 00 Speedglas 9100 FX Air Welding Shield, without welding filter, with Fresh-air C Regulator.
54 88 05 Speedglas 9100 FX Air Welding Shield with 9100V Filter, with Fresh-air C Regulator.
81910627 Speedglas 9100 FX Air Welding Shield with 9100X Filter, with Fresh-air C Regulator.
54 88 25 Speedglas 9100 FX Air Welding Shield with 9100XX Filter, with Fresh-air C Regulator.
* With bag (79 01 01)
Art. No Description Art. No Description Art. No Description
A Filter cover: holds the user-replaceable spark arrestor, which reduces the risk of filter fires.
B Prefilter: increases the service life of the Art.icle filter.
C Art.icle filter: high ef-ficiency Art.iculate filtra-tion.
D Gas filter: (A1B1E1 or A2) captures organic, inorganic and acid gases and vapours. Gas filters sold separately.
E Odour filter: removes unpleasant smells (not needed if a gas filter is installed); sold separa-tely.
F NiMH battery: fully charged in four hours. Expected operating time is 8 hours with new Art.icle filter and new, fully-charged battery.
G Brushless motor: with an average life three times longer than conventional motors.
H Filter Indicator: indicates the status of the Art.icle filter.
I Airflow Plus: for hot, humid jobs, you can increase the airflow from 170 l/min to 200 l/min with the push of a but-ton.
J Breathing tube: self-adjusting or heavy-duty rubber.
K Exclusive airflow pat-tern: evenly distributes filtered air throughout the entire breathing zone of the shield. The intelligent turbo unit keeps the airflow rate at a constant, preset level. A diffuser spreads out the airflow pattern for your maximum comfort.
L Soft, flexible face seal (removed here for clarity): creates a positive pres-sure environment within the shield, keeping the surrounding pollutants at bay.
Shown here: 3M™ Adflo™ Powered Air Respirator with 3M™ Speedglas™ 9100 FX Air Welding Shield.
Respiratory Protection
Six-figure Art. No. = Special order item
Personal safety
16 17Pr
ote
cto
r O
ne
Pro
tect
or
Two
Pro
tect
or
Thre
e
Pro
tect
or
Fou
r
Pro
tect
or
4,5
Pro
tect
or
Five
50
1 -
551
Pro
tect
or
Five
Tu
rbo
Max
. 50
1TM
Pro
tect
or
Five
Excl
us.
J.B
.O.A
rgo
n w
ith
o
bse
rvat
ion
sti
p
J.B
.O. A
rgo
n w
ith
fl
ip-u
p f
ron
tpie
ce
Han
dsh
ield
Article no. Size
81911081 DIN 7 51x108 • • •81911001 DIN 8 51x108 • • •81911007 DIN 9 51x108 • • •81911005 DIN 10 51x108 • • •81911008 DIN 11 51x108 • • •81911006 DIN 12 51x108 • • •81911049 DIN 13 51x108 • • •81911004 Green acrylic 22x108 •
81911063 Yellow acrylic 22x108 •
81911082 DIN 7 60x110 • • •81911060 DIN 8 60x110 • • •81911059 DIN 9 60x110 • • •81911058 DIN 10 60x110 • • •81911057 DIN 11 60x110 • • •81911056 DIN 12 60x110 • • •81911055 DIN 13 60x110 • • •81911045 1000 hours filter 51x108 • • •81911053 1000 hours filter 60x110 • •81911003 Clear acrylic 22x108 •81911002 Clear acrylic 51x108 • •81911054 Clear acrylic 60x110 • •81911061 Clear acrylic 64x101 •81910401 DIN 9 90x110 •81910402 DIN 10 90x110 •81910403 DIN 11 90x110 •81910404 DIN 12 90x110 •81911062 Clear protection glass 90x110 • • • • •81910107 Clear protection glas 97x110 • • • • • •81910106 Clear protection glas 51x107 • • • •81911064 Clear protection glas 25x110 •81911065 Clear protection glas 68x110 •81910418 Clear protection glas 66x109 •81910414 Optical filter DIN 10 90x110 •81910417 Optical filter DIN 10-13 90x110 •81910420 Optical filter DIN 9-12 90x110 •
•Old models •New models If you require DIN filters or clear protection glass in special measurements, please contact Migatronic.
Technical Specifications of 3M™ Air Delivery Units for Welding Safety
Power filters for welding helmets
51 x 108 mm Clear + 1.0 Article no. .............................. 81911051
51 x 108 mm Clear + 1.5 Article no. .............................. 81911046
51 x 108 mm Clear + 2.0 Article no. .............................. 81911047
51 x 108 mm Clear + 2.5 Article no. .............................. 81911048
Internal protection glass for Protector ADF welding helmet
10 pcs.Article no. ...................81910586
External protection glass for Protector ADF welding helmet
10 pcs.Article no. ...................81910585
Technical Specifications3M™ Adflo™
Powered Air Respirator3M™ Fresh-air C Supplied Air Regulator
Filters Art.icle filterGas Filter (A1B1E1 or A2) Odour filter
N/A
Airflow 170 l/min (Nominal)200 l/min (Airflow Plus Mode)
170-280 l /min (Nominal)
Air PressureAir Quality
N/AN/A
4–8 barBreathable supplied air conforming to EN12021
Weight Respirator / Regulator 1 160 g
365 g
Battery Charging timeOperating hours*
NiMHLess than 4 hours8 hours (Standard), 12 hours (High capacity)
N/A
BeltOptional extension
Leather, 75–115 cm+25 cm
Polypropylene, 76–133 cm
Temperature range:OperationStorage
-5 ° C to + 55 ° C-20 ° C to + 55 ° C
-5 ° C to + 55 ° C-20 ° C to + 55 ° C
* Run times are with new, fully-charged batteries and new filters.
Personal safety
18 19
Curtain standCurtain stand for Migatronic kit.Dimension H x W:2000 x 2000 mmArticle no. .................81910209
Migatronic kitWelding curtains incl. stand.Measurement W x H: 2000 x 2000 mm. Strip curtainsmeasurement:W x H x D: 470 x 1600 x 1,0 mm
Available with the followingcurtains:Dull green, non-transparent:Article no. ...................81910189Bronze, transparent:Article no. ...................81910188Orange, transparent:Article no. ...................81910187
Strip curtainsMigatronic welding curtains with 1.0 mm thick strips. Supplied in boxes of 4. Check dimensions of the strip curtains in the table below and design a booth that suits your require-ments.
Large workpieces can easily be passed through the curtains, and in the case of damage it is necessary to replace only the damaged strip(s).
Hooks for standArticle no. .................81910210
Clear:Protection against draught and grinding dust
Orange:Shielding during arc welding
Bronce:Shielding during arc welding
Green (non-transparent):Shielding during arc welding
Mobile welding curtainMobile welding curtain with2 pivoting arms allows you tomake either a booth or anextended curtain (4050 mmx 2100 mm). The stand issupplied with 1.0 mm thicknon-transparent or orange strips.Non-transparent stripsArticle no. .................81910284Orange strips Article no. .................81910294
Welders risk exposure to radiation, weld spatter and grinding dust during welding operations. The use of Migatronic shielding products reduces this risk considerably and
eliminates radiation damage if the products are used according to instructions.
Height mm
Width mm
Thickness mm
Number Dull green Bronze Orange(Special order item)
1600 570 1.0 4 81910163 81910169 81910166 *
2000 570 1.0 4 81910165 81910171 81910168 ** = Special order item
Welding curtainsSeparate curtains in standard sizes with ring holes at 22 cm spacing at the top and with plastic snap fasteners welded on the sides. Supplied with 7 steel rings. Available as follows:
WarningEyesight, one of our most important senses, is easily damaged by UV and IR radia-tion as well as by the visible blue light from the welding arc. Futhermore, sparks, spatter and metal splinters mayget into your eye and causepermanent sight damage.
StandardMigatronic welding curtains are DIN approved and meet the requirements of:• EN-1598• DIN21404,del2
Dull green Orange Brown (Bronze) Non-transparent Transparent Transparent
Height x width Article no. Article no. Article no.
1600 x 1400 mm 81910158 * 81910155 * 81910152 *
1800 x 1400 mm 81910159 * 81910156 * 81910153 *
2000 x 1400 mm 81910160 81910157 81910154
Migatronic welding curtainsand strip curtains protectagainst every kind of UVradiation up to 560 nm.
Migatronic welding curtainsand strip curtains aretransparent and protect theeyes from the damaging light.
3
7 1 54
6
2
4 8
Build your personal welding boothMax. distance between floor and curtain: 40 cm
Your personal welding booth can be made of curtains of fixeddimensions, curtains with snap fasteners or alternatively, strip curtains which are easy to replace in the case of damage.
Pos. no. Designation Article no.
1. Galvanised C-profile. Dimensions: 30 x 35 x 1.5 mm, (max 6 m) 81910356 2. Wall fittings for C-profile 81910241 * Angle brace 81910350 * Holder for C-profile 81910351 * 3. Galvanised support with baseplate for C-profile Height: 225 cm 81910353 * Height: 285 cm 81910354 * 4. Galvanised rail fittings for C-profile 81910357 * 5. Galvanised T-piece connecting C-profiles 81910352 * 6. Galvanised 90° bend, radius 500 for C-profile 81910355 * 7. Plastic sliding rails for C-profile (16 pcs.) 81910211 8. Curtain, see page 14
Mobile welding curtainWelding curtain incl. standDimensions W x H:1450 x 2000 mmAvailable with the followingcurtains:Dull green, non-transparent:Article no. .................81910150
Orange, transparent:Article no. .................81910151
* = Special order item
20 21
Wall fittingsArticle no. .................81963130
T-pieceArticle no. ...................81963132
Angle pieceArticle no. .................81963131
Flowmeter pipe, completeArticle no. .................81963128
Flowmeter pipe, completeArticle no. ...................81963138
Closing regulatorArticle no. ...................81963133
Flowmeter pipe, exteriorArticle no. .................81963137
Gas flow gaugeArticle no. .................81010000
Manometer * Acetylene low pressureArticle no. .................81963140
Manometer Optimator, 3-5 barArticle no. .................81963127
Manometer * Carbo-/Argonex, Tigex high pressureArticle no. .................81963144
Quick-release fitting, maleGasArticle no. ...................43120008
Manometer * Acetylene high pressureArticle no. .................81963141
Manometer * Carbo-/Argonex, low pressureArticle no. .................81963145
Quick-release fitting, femaleFor pressure regulatorArticle no. ...................43120026
Flowmeter pipeFlowmeter pipe with exterior collarArticle no. ...................81963173
Pressure regulators
TIGEX I Ar/Mix 30 l.Article no. .................81963055
ARGONEX 30 l.Article no. ...................81963058
TIGEX II Ar/Mix 30 l.Article no. .................81963057
OxygenArticle no. .................81963066
TIGEX I CO2 30 l.Article no. ...................81963061
AcetyleneArticle no. ...................81963065
CARBONEX 30 l.Article no. .................81963060
Formier 30 l.Article no. .................81963067
OPTIMATOR Ar/mix Article no. ...................81963041
Formier 30 l.Article no. .................81963068
OPTIMATOR II Ar/mix Article no. .................81963043
OPTIMATOR Gas-saverAr/mixArticle no. ...................81963054
OPTIMATOR Ar/H2Article no. ...................81963042
OPTIMATOR II Ar/H2 *Article no. .................81963044
OPTIMATOR Tap unit1 flowmeterArticle no. ...................81963045
Optimator Gas-saverFor AltopArticle no. ...................81963316
* = Special order item
22 23
Remote controls
MIG SprayMIG/MAG spray with propel-lant gas (propane). Approved for galvanisation without any pre- or post-treatment clean-ing. Supplied in 400 ml cans.Article no. .................81950009
Cooling liquidSpecial eco-friendly cooling liquid for Migatronic’s water-cooled welding machines.5 litre can:Article no. ...................99290505
RefillSilicone-free MIG spray refill:10 litre can.Article no. .................8195002710 litre can for robot.Article no. .................81950028
MIG PasteWelding and protection paste.Protects gas nozzles againstslag. Made of purely naturalproducts. Silicone-free. Suppliedin 300 g jars.Article no. .................81950026
Remote control FPBPulse adjustment, also with pulsing in slope-up and slope-down function. Infinitely-variable adjustment of pulse current and base current. Infinitely-variable setting of pulse time and pause time. 8-pole remote control cable.Article no. .................76116380
Foot switch7-pole aircooled.Article no. ...................78815016
7-pole watercooled.Article no. ...................78815015
Foot switch FTFInfinitely-variable adjustment of current adjustment range.Adjustment of current andstart/stop function. Remotecontrol cable, 8-pole and 6-pole.Article no. ...................78815010
Remote control kit for MWF 1011/21Article no. ...................78861182
Remote control FSLPocket remote control unit.8-pole remote control cable.Article no. .................76116382
Remote control FSJPocket remote control unit, metal.8-pole remote control cable. Article no. ...................76116343
Remote controls for KMX, Flex XMA and Sigma2 potmeters, 8-pole plug; For MIG/MAG adjustment Article no ..................78815028
1 potmeter, 8-pole plug; For MMA adjustmentArticle no ..................78815029
Chemicals
Spray paintOriginal Migatronic spray paint
Dark green:Article no. .................99311003
Green:Article no. .................99311004
Grey:Article no. .................99311005
* = Special order item
Remote controls for Pi1 potmeter, 7-pole plug; For MMA adjustmentArticle no ..................78815035
Double tap *Ar/Mix 3/8 HArticle no. ...................81963149
Gas preheater *CO2 W 21.8 x 14.1. 1 x 230V.Article no. ...................81960048
Gas welding kit *Article no. ...................81970002
Pressure regulators
* = Special order item
Disposable non-return valveAcetylene 3/8” L Article no. .................81963121
Recyclable non-return valve (no photo)Article no. ............. 81963142 *
Disposable non-return valveOxygen 3/8 3/8” RArticle no. .................81963120
Recyclable non-return valve (no photo)Article no. ............. 81963143 *
Transition nippleCO2 cylinder Argon adjustmentArticle no. ...................81961007
Cylinder gasketAr, CO2, O2
Article no. ...................81963129
Cylinder gasketAcetyleneArticle no. .................81963139*
Argon cylinder CO2 adjustmentArticle no. ...................81961008
24 25
Fume extraction
MigAir 1000 *1 x 230 V = 0.75 kW extractionunit for wall-mounting and theunit includes a wall bracket and motor. Fitted with 3 m extraction arm with knee joint and thus occupying a minimum of space when not in use. Also available with light kit allow-ing installation of a 12 V bulb in the extraction funnel. 3 x 400 V. Article no. ...................82031039
1 x 230 VArticle no. ...................82031074
PM 300 mouthpiece *Rectangular extraction mouth-piece, 300 mm wide, with magnetic foot. For ø45 extraction hose.Article no. ...................82031002
TM 200 mouthpieceRectangular extraction mouth- piece, 200 mm wide, withmagnetic foot. For ø45 extraction hose.Article no. ...................82031001
For ø50 extraction hose.Artikelnr. .....................82031078
MigAir 841 *MigAir 841 is equipped with an automatic start/stop functionconnected to a holder on the extraction unit. Once welding hasstarted, extraction will start. The stop function is adjustable with5-25 seconds delay so as to ensure that all fume is extracted.At the same time the torch is additionally air cooled. Theautomatic stop function is energy saving and ensures a longer life of the MigAir 841. Equipped with indicator for replacement ofno-touch filter. 220 V.Article no. ............................................................................ 82031011
TM 80 mouthpieceRound extraction mouthpiece,ø80 mm with magnetic foot. For ø45 extraction hose.Article no. ...................82031003
Flexible extraction hoseFlexible hose by the runningmetre for MigAir and mouth- piece. Interior ø45 mm.Article no. ...................92570041
Adaptor *
Article no. ...................82031024
FilterFor MigAir 8841 Article no. ...................82031005
* = Special order item
Nozzle tongsØ 12-15 mm.Article no. .................81940010
Gas nozzle cleanerSpecial gas nozzle cleaner withspring blades. Fits all gas nozzles.Article no. ...................81940012
Nozzle tongsArticle no. ...................81940028
Nozzle tongsØ 15-18 mm.Article no. .................81940011
Mitre magnetMitre magnet for 30°, 45°, 60°,75° and 90°.Retaining power 1 x 450 NArticle no. ...................81080005
Chipping hammerChipping hammer with metalhandle. 430 gm.Article no. ...................81920003
Mitre magnetMitre magnet for 30°, 45°, 60°,75° and 90°.Retaining power 1 x 300 NArticle no. .................81080003
Body chiselStandard body chisel.Made in GermanyArticle no. .................81940024
Carbon-arc torchCarbon-arc torch, K - 4000Article no. ...................81899001Carbon-arc electrodes, 6 x 305 mm. Article no. ...................81899006Carbon-arc electrodes, 8 x 305 mm. Article no. ...................81899008Carbon-arc electrodes, 10 x 305 mm. Article no. ...................81899010Carbon-arc electrodes, 13 x 305 mm. Article no. ...................81899013
Marking crayons, oilBox containing 12 pcs., whiteArticle no. .................81010015Box containing 12 pcs., yellowArticle no. .................81010016Box containing 50 pcs., soapstoneArticle no. .................81010017
Tools
Brush for stainless steel and aluminium, greenArticle no. .................81940020
Welding mirrorWelding mirror with magneticfoot and flexible arm. Dimension 70 x 80 mm. 1.5 mm thick mirror. Article no. ................... 81912201
Welding mirrorFitted on flexible arm and withball joint. Dimension 70 x 80mm. 1.5 mm thick mirror.Article no. ................... 81912202
MirrorDetachable mirror, 1.5 mm thick.Article no. ...................81912204
26 27
Torches Automig 98 - 183/223ML 150 C / ZA4 m without remote controlArticle no. .................80197179
Central connectionsCentral connection for AutomigArticle no. .................71110111Central connection for Automig XArticle no. .................71110114Central connection for Automig XEArticle no. .................71110120Central connection for Compact 120/160CArticle no. .................71110103
Stainless steel kit for Automig
1 pcs. Carbon wire liner with bronze neck liner Article no.: 80160707
1 pcs. Wire roll kit 0.8 mm Article no.: 73940039
1 pcs. Guide tube for wire liner Article no.: 26310087
1 pcs. Argon valve and manometer Article no.: 81963058
15 kg 316 LSI 0.8 mm stainless steel wire Article no.: 81843808
Complete kit Article no.: 81100121
Aluminiums kit for Automig
1 pcs. Wire liner Article no.: 80160711
1 pcs. Wire rolls kit 1.0 mm Article no.: 73940040
1 pcs. Guide tube for wire liner Article no.: 26310087
1 pcs. Argon valve and manometer Article no.: 81963058
5 pcs. Contact tips Article no.: 80130203
6 kg AIMg 5 1.0 mm Article no.: 81846710
Complete kit Article no.: 81100120
Big Starter Kit for Automig
1 pcs. Welding helmet Article no.: 81910090
5 kg 0.8 mm mild steel wire Article no.: 81840012
1 pcs. 6 kg CO2 in cylinder Article no.: 81710001
1 pcs. CO2 pressure reducing valve and manometer Article no.: 81963060
1 pcs. Distance piece for 5 kg wire reel Article no.: 26150019
Complete kit Article no.: 81910248
Small Starter Kit for Automig
1 pcs. Hand shield Article no.: 81910144
5 kg 0.8 mm mild steel wire Article no.: 81810012
1 pcs. 6 kg CO2 in cylinder Article no.: 81710001
1 pcs. CO2 pressure reducing valve and manometer Article no.: 81963060
1 pcs. Distance piece for 5 kg wire reel Article no.: 26150019
Complete kit Article no.: 81100115
Migatronic has more than 30 years experience in the automotive trade. Now Migatronic’s Starter Kits make it even
easier to start welding with different types of steel.
Torches Automig XE 1989-98 180/200 AML 150 B - XEArticle no. .................80191178
Automotive equipment
Separate torch holderArticle no. .................78861164
Tool box for Automigincl. torch holder.Article no. ...................78861157
Kit for 230/V 10 A auxiliary voltage supplyfrom three-phase machines.Article no. .................78861153
Knob for adjustment of spot and interval welding facilitiesArticle no. .................18508004Knob for adjustment of current Artikelnr. ...................18508002
Torches Automig 98 - 273ML 250 Twist3 m without remote controlArticle no. ...................80197250ML 2503 m with remote controlArticle no. ...................80196250ML 2504 m without remote controlArticle no. ...................80197251ML 2504 m with remote controlArticle no. ...................80196251
Torches Automig 98 - 183/223ML 150 Twist3 m without remote controlArticle no. .................80197150ML 1503 m with remote controlArticle no. .................80196150ML 1504 m without remote controlArticle no. .................80197151ML 1504 m med fjernreguleringArticle no. .................80196151
Pull nails and discsFor welding onto the vehiclebody and used together with pull hammer.Pull nails:Article no. .................42790011discs:Article no. .................42790020
Pull hammerUsed with pull nails for the repair of minor vehicle body damage.Article no. ...................81920010
Torches Automig until 1989 180/200/250 AML 150 B - XRArticle no. ...................80191177
Torches Automig 1989-98250 A TwistML250 3 m without remote controlArticle no. .................80197250ML250 3 m with remote controlArticle no. .................80196250ML250 4 m without remote controlArticle no. .................80197251ML250 4 m with remote controlArticle no. .................80196251
Electronic control box MPS 4TF with automatic spot welding and interval welding facilities and possibility of using Dialog torch.Article no. ...................76116982
Electronic control box UPSwithout automatic spot welding and interval welding facilities. Article no. ...................76116984
28 29
Trouble-free TIG welding requires a correctly-ground Tungstenelectrode. Grind the electrode with a fine-grained diamond disc which is designed for grinding Tungsten electrodes. Grinding method and angle will depend on individual preferences.
For special requests for delivery of Tungsten electrodes in non-standard lengths (or ground electrodes): please contact Migatronic.
Tungsten grinder Green Pointer X2DK: Article no. ...................82036184Export with Schuko plug Article no. ...................82036170
Electrode holderFor Green Pointer X2Article no. ...................82036172
Filter for Green Pointer X2
Article no. ...................82036179
Diamond discFor Green Pointer X2, ø 40 mmArticle no. ...................82036171
Eletrode clampsFor Green Pointer X2.ø 1.0 mmArticle no. ...................82036173ø 1.6 mmArticle no. ...................82036174ø 2.0 mmArticle no. ...................82036175ø 2.4 mmArticle no. ...................82036176ø 3.2 mmArticle no. ...................82036177ø 4.0 mmArticle no. ...................82036178
Tungsten recommendationsArticle no. ...................52179133
Diameterx standardlength
1,0 x 175 mm
1,6 x 175 mm
2,0 x 175 mm
2,4 x 175 mm
3,2 x 175 mm
4,0 x 175 mm
4,8 x 175 mm
Green ren Article no.
80360021
80360022
80360024
80360026
80360027
Black 1% La Article no.
80360041
80360042
80360043
80360044
80360045
80360047
Grey 2% Ce Article no.
80360051
80360052
80360053
80360054
80360055
80360056
Turquoise WS2 Article no.
80360070
80360071
80360072
80360073
Blue 2% La Article no.
80360091
80360092
80360093
80360094
80360095
80360096
Gold 1,5 % La Article no.
80361191
80361192
80361193
80361194
80361195
80361196
80361197
Super BlueWS 2Article no.
80361371
80361372
80361374
80361376
80361377
80361378
* = Special order item
Spare parts kit for Automig 183/223 (ML 150)Swan neck Number: 1 pcs. Article no.: 80151202Gas nozzle Number: 5 pcs. Article no.: 80140023Contact bush Number: 5 pcs. Article no.: 80110020Retaining spring Number: 5 pcs. Article no.: 80100021Contact tip 0.8 Number: 25 pcs. Article no.: 80130202Wire liner, blue Number: 2 pcs. Article no.: 80160521Spare parts box Number: 1 pcs. Article no.: 81100211Order form Number: 1 pcs. Article no.: 50129160Complete kit Article no.: 81100223
Spare parts kit for Automig 273/MIG 305 (ML 250)Swan neck Number: 1 pcs. Article no.: 80151302Gas nozzle Number: 5 pcs. Article no.: 80140601Contact bush Number: 5 pcs. Article no.: 80110601Retaining spring Number: 5 pcs. Article no.: 80100600Contact tip 0,8 Number: 10 pcs. Article no.: 80130202Contact tip 1,0 Number: 10 pcs. Article no.: 80130203Wire liner, blue Number: 2 pcs. Article no.: 80160521Spare parts box Number: 1 pcs. Article no.: 81100211Order form Number: 1 pcs. Article no.: 50129160Complete kit Article no.: 81100224
Supplement to TIG starter kit1 pcs. Argon in 12 l cylinder (2,4 m3). Article no.: ................ 81711000
10 kg AIMg5, 2.4 x 1000 mm for aluminium welding rod. Article no.: ................ 81856724
5 kg Miga KV2 2.5 x 1000 mm for mild steel welding rod.Article no.: ................ 81850009
Automotive equipment
30 31
Quick releaseWater with valve, ø 8 mm Article no. ...................43129008
Quick releaseWater with valve, ø 8 mm Article no. ...................43129007
Quick releaseWater with valve, ø 8 mm Article no. ...................43129003
Quick releaseWater with valve, ø 8 mm Article no. ...................43120022
Quick releaseGas, ø 6 mm
Article no. ...................43120025
Water stoppers Ø 9.5 mm for TIG hoses BlueArticle no.. ................45050339RedArticle no.. ................45050340
Ø 11.2 mm for MIG hosesBlueArtikelnr. ...................45050341RedArticle no.. ................45050342
Quick release, plasmaArticle no. .................43120048
Quick release, plasmaArticle no. ...................43120047
Quick releases
Quick releaseWater, ø 6 mmArticle no. ...................43120015
Quick releaseGas, ø 6 mmArticle no. ...................43120008
Quick releaseWater, SL connector ø 5 mmArticle no. ...................43120007
Quick releaseWater, ø 6 mmArticle no. ...................43120003
Quick releaseGas, 1/8”Article no. ...................43120012
Quick releaseWater SLST ø 8 mmArticle no. ...................43120017
Quick releaseWater with valve ø 8 mmArticle no. ...................43120016
Quick releaseWater with valve ø 6 mmArticle no. ...................43120015
Quick releaseWater with valve ø 6 mmArticle no. ...................43120021
Quick releaseGas, 1/8”Article no. ...................43120027
Quick releaseWater with valve ø 6 mmArticle no. ...................43129003
Quick release femaleFor pressure regulatorsArticle no. ...................43120026
32 33
Square mm
Length
3 m
5 m
10 m
15 m
20 m
25 m
16
80511603
80511605
80511610
25
80512503
80512505
80512510
80512515
80512520
80512525
35
80513503
80513505
80513510
80513515
80513520
80513525
50
80515003
80515005
80515010
80515015
80515020
70
80517003
80517005
80517010
80517015
80517020
Square mm
Length
3 m
3,5 m
5 m
10 m
15 m
20 m
25 m
30 m
16
80501603
80571002
80501605
80501610
25
80502503
80502505
80502510
80502515
80502525
35
80503503
80503505
80503510
80503515
80503520
80503525
50
80505003
80505005
80505010
80505015
80505020
80505030
70
80507003
80507005
80507010
80507015
80507020
95
80509503
80509505
80509510
80509520
(For Automig without excl. Dinse connection.)
Square mm
Length
3 m
5 m
10 m
15 m
16
80521605
80521610
80521615
25
80522503
80522505
80522510
80522515
35
80523503
80523505
80523510
80523515
50
80525003
80525005
80525010
70
80527003
80527005
80527010
80527015
Fitted with Dinse connection plug and socket
Approved extension cables for electrode cables and earth cables
Fitted with earth clamp and Dinse connection plug
Approved rubber electrode cables: acid and oil resistant
Approved rubber electrode cables: acid and oil resistant
Fitted with electrode holder and Dinse connection plug
Copper
16 mm2
25 mm2
35 mm2
100%
130
170
210
60%
145
200
245
35%
165
240
295
Copper
50 mm2
70 mm2
95 mm2
120 mm2
100%
265
325
390
460
60%
315
395
475
570
35%
380
475
580
700
Max. duty cycle in A
Welding cablesHigh-quality rubber weld-ing cables in accordance with International Standard approvals for welding.Copper (item no. is for 1 metre)
16 mm2. Article no. ..................92340016
25 mm2. Article no. ..................92340025
35 mm2. Article no. ..................92340035
50 mm2. Article no. ..................92340050
70 mm2. Article no. ..................92340070
95 mm2. Article no. ..................92340095
Please contact us if you require our assistance in calculating dimensions and lengths of cables.
Recommended dimensions/lengths of welding cablesMax. 20 m length for ordinary welding
Migatronic offers a wide range of cables, plugs and holders for the welding industry.If you do not find the required item in this catalogue, please contact us.
Separate screw for 200 A cabel 10 x 8Article no. .................80550029
Separate screw for 450 A cabel 10 x 10Article no. .................80550031
Separate screw for 450 A cabel 12 x 12Article no. .................40511212
Cables/plugs and holders
Myking electrode holderInsulating rubber jacket. 2 settings with welding angle 45° or 90°. Optimum currenttransfer. Screwed type for op- timum fixing of the electrode.200 A. Article no. ........80550010450 A. Article no. ........80550009600 A. Article no. ........80550008
Electrode holder“Alligator clip”300 A. Article no. ........80550037400 A. Article no. ........80550035600 A. Article no. ........80550036
Distributor socket T-pieceUsed for double connections.Cable 70Article no. ...................18120050
Separate head for Myking45°/90°. 200 A.Article no. ...................8055002745°/90°. 450 og 600 A.Article no. ...................80550028
Handle for MYKING 2, 450 A.Article no. ...................80550032
Earth clamp250 A. Article no. ........80560010400 A. Article no. ........80560011500 A. Article no. ........80560012
Spring earth clamp200 A nev. 200Article no. ...................80560001
300 A nev. 350Article no. ...................80560002
Screw-on earth clamp600 A.Article no. ...................80560009
Dinse connection plug, male0-25 mm2. Ø 10.Article no. ...................1812000635 -50 mm2. Ø 13.Article no. ...................1812000250 - 70 mm2. Ø 13.Article no. ...................1812000370 - 95 mm2. Ø 13.Article no. ...................18120004
Dinse connection socket, female10-25 mm2. Ø 10.Article no. ...................1811000135 -50 mm2. Ø 13.Article no. ...................1811000270 - 95 mm2. Ø 13.Article no. ...................18110003
Extension socket, female10-25 mm2. Ø 10.Article no. ...................1811010135 -50 mm2. Ø 13.Article no. ...................1811010250 - 70 mm2. Ø 13.Article no. ...................18110103
Magnetic earth clamp200 A. Article no. ........80560013400 A. Article no. ........80560014600 A. Article no. ........80560015
Cables for remote control units
Length
1 m interconnection for TIG unit
3 m cable
5 m cable
6 m cable
10 m cable
15 m cable
20 m cable
6 poles
Article no.
74341000
x
74341003
x
74341001
x
74341002
8 polers
Article no.
74340000
x
74340003
x
74340001
x
74340002
19 poles
Article no.
x
x
74341010
x
74341011
74341012
74341013
Bush for 9 mm cable. 200 AArticle no. .................80550030
Bush for cable. 450 A/600 AArticle no. ...................25440003
Earth clamp, 600 AArticle no. .................80560022
34 35
Storage cabinet for electrodes ES 210 *This cabinet is designed forstorage of electrodes but is also suitable for drying at low and medium temperatures. Athermostat provides infiniteadjustment of temperature up to 300°C. Shelf units consist of 3 shelves removable as 1 unit.
Primary voltage 110/220 VPower 1000 WPrimary current 4,5 AOperating temperature 50 - 300°C
Dimensions, mm W x L x H:ElectrodecomArt.ment 460 x 500 x 520Exteriordimension 560 x 640 x 740Electrode capacity 210 kgNet weight 50 kg
Article no. .................81795003
Electrode oven for electrodesand powders with controlbox ETS 260 *This cabinet is designed for ba-king electrodes and powders.The drying temperature is infi-nitely adjustable up to 500°C and the set temperature is maintained by a high-quality thermostat. The thermostat is fitted with a thermometer for visual control. The shelves are designed to provide air circula-tion within the cabinet so as to ensure an even temperature throughout the oven.A screen plate protects againstradiated heat.ETS 260 has a timer facility fordrying time and can be set atdifferent periods up to 60 hours.The control box can be orderedseparately and is easily fitted onto the ES 260 which thus becomes an ETS 260.
Primary voltage 220/380 VPower 2300 WPrimary current 10/6 AOperatingtemperature up to 500°C
Dimensions, mm W x L x H:ElectrodecomArt.ment 500 x 500 x 750Exteriordimension 640 x 640 x 980Electrode capacity 260 kgNet weight 120 kgArticle no. .................81795005
Control box *:Article no. .................81795006
Storage cabinet for electrodes and powders ES 260 *Outdoor and indoor portablestorage cabinet for electrodesand powders and drying at lowor medium temperatures. Aninfinitely adjustable (up to 300°C) thermostat ensures a constant temperature inside the cabinet. If storage of elec-trodes in original packing is required, the cabinet can be fitted with a safety thermostatkeeping the temperature be-low 70°C. The cabinet can betransported either by crane orfork-lift truck.Primary voltage 220 VPower 2300 WPrimary current 10 AOperatingtemperature up to 300°C
Dimensions, mm W x L x H:ElectrodecomArt.ment 500 x 500 x 750Exteriordimension 640 x 640 x 775Electrode capacity 260 kgNet weight 110 kg
Article no. .................81795004
Storage cabinet RTS 270 forflux-cored wires *Cabinet designed for storage of flux-cored wires on reels. The drying temperature is infi-nitely variable and is thermo-statically controlled within the range of 20-50°C. The cabinet will hold 18” and 12” wire reels and can be moved fully-loaded by crane or fork-lift truck.
Primary voltage 220 VPower 500 WPrimary current 2.3 AOperatingtemperature 20 - 50°C
Dimensions, mm:W x L x H: 910 x 510 x1500Capacity 270 kgNet weight 130 kgArticle no. ...................81795007
Wire adaptorUsed when changing fromplastic reels to metal reels.Article no. .................81899017
Adaptor for 5 kg reelUsed together with 5 kg/D200 reels.Article no. ...................45050333
Electrode ovens
Green Dryer heat-insulated boxRed *Article no. ...................81795000
* = Special order item
Multiplug 6-pole
1. Multiplug, female: Article no. ...................17200001
2. Multiplug, male: Article no. ...................17210001
3. Multiplug housing (plastic) for fitting to machine:Article no. ...................18200002
4. Cover for multiplug (plastic):Article no. ...................18200004
5. Multiplug housing (metal) for fitting to hose:Article no. ...................18200101
6. Multiplug housing (metal) for fitting to machine:Article no. ...................18200102
7. Extension for multiplughousing (metal) for fitting to hose:Article no. ...................18200103
8. Junction box (metal):Article no. ...................74348002
Multiplug 4-pole
15. Multiplug, female:Article no. ...................17200030
16. Multiplug, male:Article no. ...................17210030
Multiplug 7-pole
17. Multiplug, female:Article no. ...................17200056
18. Multiplug, male:Article no. ...................17210057
Multiplug 8-pole
9. Multiplug, female:Article no. ...................17200023
10. Multiplug, male:Article no. ...................17210024
11. Adapter (metal):Article no. ...................74348001
Multiplug 19-pole
12. Multiplug, female:Article no. ...................17200026
13. Multiplug, male: Article no. ...................17210026
14. Adapter (metal):Article no. ...................74348003
Spare parts box MIG/MAGSpare parts box with storagecomArt.ments. Excl. spare parts.Dimensions H x L x W: 57 x 340x 265 mmArticle no. ...................81100211
Order form MIG/MAGOrder form consisting of:MIG/MAG front page, ML/MVblank page, ML 130, ML 150,ML 240, ML 250, ML 300/360,MV 240, MV 450/550Article no. ...................50129100
Spare parts box TIGSpare parts box with storagecomArt.ments. Excl. spare parts.Dimensions H x L x W: 57 x 340x 265 mmArticle no. ...................11100210
Order form TIGOrder form consisting of: TIGfront page, TIG blank page, TIG100 valve, TIG 100, TIG 200/260,TIG 300, TIG 400, TIG 500Article no. ...................50129300
15
16
17
18
TIG torch brochureArticle no. ...................52125001
MIG torch brochureArticle no. ...................52125000
Spare parts box ZetaComplete with all spare partsArticle no. ...................81100239
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Cables/plugs and holders
MIGATRONIC wORldwIdE
5217
0004
G
DENMARK:
Main office:SVEJSEMASKINEFABRIKKEN MIGATRONIC A/SAggersundvej 33, 9690 FjerritslevTel. (+45) 96 500 600, www.migatronic.com
MIGATRONIC EUROPE:
United Kingdom MIGATRONIC WELDING EQUIPMENT LTD.21 Jubilee Drive, Belton Park, LoughboroughLeicestershire LE11 5XS, United KingdomTel. (+44) 01509 267499, www.migatronic.co.uk
France MIGATRONIC EQUIPEMENT DE SOUDURE S.A.R.L. Parc Avenir II 313 Rue Marcel Merieux 69530 Brignais, France Tel. (+33) 04 78 50 65 11, www.migatronic.fr
Italy MIGATRONIC s.r.l. IMPIANTI PER SALDATURA Via dei Quadri 40, 20871 Vimercate, Italy Tel. (+39) 039 9278093, www.migatronic.it
Norway MIGATRONIC NORGE AS Industriveien 1, 3300 Hokksund, Norway Tel. (+47) 32 25 69 00, www.migatronic.no
Czech Republic MIGATRONIC CZ a.s. Tolstého 451, 415 03 Teplice 3, Czech Republic Tel. (+42) 0417 570 660, www.migatronic.cz
Hungary MIGATRONIC KERESKEDELMI KFT. Szent Miklós u. 17/a, 6000 Kecskemét, Hungary Tel. (+36) 76 481 412, www.migatronic.hu
MIGATRONIC ASIA:
China SUZHOU MIGATRONIC WELDING TECHNOLOGY CO. LTD.#4 FengHe Road, Industrial Park, SuZhou, ChinaTel. 0512-87179800, www.migatronic.cn
Migatronic Automation:MIGATRONIC AUTOMATIONKnøsgårdvej 112, 9440 Aabybro Tel. (+45) 96 962 700, www.migatronic-automation.com
Migatronic Export:MIGATRONIC-EXPORT A/SAggersundvej 33, 9690 FjerritslevTel. (+45) 96 500 600, www.migatronic.com
Finland MIGATRONIC OY Tel. (+358) 0102 176 500, www.migatronic.fi
The Netherlands MIGATRONIC NEDERLAND B.V. Hallenweg 34, 5683 CT Best, The Netherlands Tel. (+31) 499 375 000, www.migatronic.nl
Italy GREENWELD s.r.l. Via Dei Quadri 40, 20871 Vimercate, Italy Tlf. (+39) 039 9278100
Sweden MIGATRONIC SVETSMASKINER AB Nääs Fabriker, Box 5015, 44 850 Tollered, Sweden Tlf. (+46) 031 44 00 45, www.migatronic.se
Germany MIGATRONIC SCHWEISSMASCHINEN GMBH Sandusweg 12, 35435 Wettenberg, Germany Tel. (+49) 641 982840, www.migatronic.de
India MIGATRONIC INDIA PRIVATE LTD.22, Sowri Street, Alandur, 600 016 Chennai, IndiaTlf. (+91 44) 223 00074 www.migatronic.com