$3.00 470 Maryland Drive • Ft. Washington, PA19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.constructionequipmentguide.com “The Nation’s Best Read Construction Newspaper… Founded 1957.” ® Midwest Edition see FUND page 18 Workers remove the barriers to the Madison Avenue Bridge across I-70 in St. Louis. The bridge was completed early and under budget. July 24 2010 Vol. XVII • No.15 By Kathie Sutin CEG CORRESPONDENT The Missouri Dept. of Transportation cut the ribbon last month on the first milestone in the construction of a new $670 million Mississippi River Bridge at St. Louis. The Madison Avenue Bridge across I-70 came in ahead of schedule and under budget, offi- cials said. Fred Weber Inc., of Maryland Heights, Mo., is the contractor. But while celebrating the completion of the first of 31 projects that make up the over- all river bridge project, MoDOT officials expressed concern over delays caused by the Fostering long-term economic growth and creating American jobs should be the top priorities in the passage of a new, multi- year federal highway and transit invest- ment bill, Caterpillar Inc., Worldwide Product Manager Larry Tate told attendees at a July 14 hearing called by U.S. Department of Transportation to discuss the overdue legislation. In a panel session “Transportation: Making the Case to the American Public,” the 2010 American Road & Transportation Builders Association (ARTBA) chairman said it was time to level with the public about the scope of the transportation chal- lenges facing the nation and how much time and money it will take to address them. He outlined a series of transporta- tion-related “truths” during his remarks. “First and foremost, the nation’s future economic growth, which makes possible our quality of life, is heavily dependent on the state of our transportation infrastructure network,” Tate said. ”If, in the future, we invest in making our network more effi- cient in moving people — and particularly goods — by adding capacity across all modes, we will be competitive internation- ally and able to create and sustain American job growth. If we make the wrong choices, we won’t.” Another truth, according to Tate, is that by 2050, the American population will Growth, Jobs Should Be Focus of Bill, Caterpillar Exec. Says By Jill Schramm MINOT DAILY NEWS MINOT, N.D. (AP) Initiated 20 years ago as a way to provide seed money to new or expanding companies, Minot’s MAGIC Fund has shifted more of its resources in recent years into creating an industrial complex. The fund has spent $8.2 million — about 27 percent of its distributions — in 20 years on land and business devel- opment in agricultural and energy parks and on the cre- ation of an intermodal transportation facility, all in east Minot. The MAGIC Fund set aside another $500,000 for the 55th Street overpass in the area. About $1.1 million has come back to the fund through repayments on the projects. “Part of the mission of the MAGIC Fund, among other things, is infrastructure,” said Jim Maxson, chairman of Minot Area Development Corp (MADC). “I think the community of Minot can be very proud of the energy park. It’s not unsightly. It’s in an area which is properly zoned. It has access to rail.” The benefit of the energy park has been apparent with the first phase of the development, said Jerry Chavez, MADC president. The first company to move into the park, Pure Energy, invested $60 million in capital improvements, he said. Pumpco Energy Services and Magnum Transportation invested additional dollars in their new facilities. The MAGIC Fund awarded about $1.7 million to build out the second phase of the Great Plains Energy Park. The money will pay for sewer and water lines, pavement, curb, gutter and street lights. “It’s more a temporary loan with no interest,” said Chavez, who noted the money is to eventually be repaid. MADC invested $320,000 of its own money into buy- ing the energy park land back before anyone was think- ing about how oil development might someday affect Minot. Chavez said MADC was looking at the potential for advancing future development rather than gaining a return on its investment. Returning the MAGIC Fund’s money is more of a priority. The creation of the energy park promotes economic development by removing much of the risk for compa- nies looking at locating in a new community, Chavez N.D. Fund Shifts More Resources to Infrastructure T.J. Lambrecht Puts D7E to Test at O’Hare...12 Ritchie Bros. Holds Chicago Sale...59 RJS Gets Boost From High-Speed Dozer...16 Inside Published Nationally see BILL page 22 see BRIDGE page 24 One Down, 30 to Go With MoDot RiverBridge Projects Table of Contents ............4 Crushing, Screening & Recycling Section ....27-34 Truck & Trailer Section .... ..................................49-53 Business Calendar ........57 Auction Section ......59-71 Advertisers Index ..........70
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
$3.00
470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.constructionequipmentguide.com
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
®MMiiddwweessttEEddiittiioonn
see FUND page 18
Workers remove the barriers to theMadison Avenue Bridge across
I-70 in St. Louis. The bridge was completed early and under budget.
July 242010
Vol. XVII • No.15
By Kathie SutinCEG CORRESPONDENT
The Missouri Dept. of Transportation cut the ribbon last month on the first milestonein the construction of a new $670 million Mississippi River Bridge at St. Louis. TheMadison Avenue Bridge across I-70 came in ahead of schedule and under budget, offi-cials said. Fred Weber Inc., of Maryland Heights, Mo., is the contractor.
But while celebrating the completion of the first of 31 projects that make up the over-all river bridge project, MoDOT officials expressed concern over delays caused by the
Fostering long-term economic growthand creating American jobs should be thetop priorities in the passage of a new, multi-year federal highway and transit invest-ment bill, Caterpillar Inc., WorldwideProduct Manager Larry Tate told attendeesat a July 14 hearing called by U.S.Department of Transportation to discussthe overdue legislation.
In a panel session “Transportation:Making the Case to the American Public,”the 2010 American Road & TransportationBuilders Association (ARTBA) chairmansaid it was time to level with the publicabout the scope of the transportation chal-lenges facing the nation and how muchtime and money it will take to address
them. He outlined a series of transporta-tion-related “truths” during his remarks.
“First and foremost, the nation’s futureeconomic growth, which makes possibleour quality of life, is heavily dependent onthe state of our transportation infrastructurenetwork,” Tate said. ”If, in the future, weinvest in making our network more effi-cient in moving people — and particularlygoods — by adding capacity across allmodes, we will be competitive internation-ally and able to create and sustainAmerican job growth. If we make thewrong choices, we won’t.”
Another truth, according to Tate, is thatby 2050, the American population will
Growth, Jobs Should Be Focusof Bill, Caterpillar Exec. Says
By Jill SchrammMINOT DAILY NEWS
MINOT, N.D. (AP) Initiated 20 years ago as a way toprovide seed money to new or expanding companies,Minot’s MAGIC Fund has shifted more of its resourcesin recent years into creating an industrial complex.
The fund has spent $8.2 million — about 27 percent ofits distributions — in 20 years on land and business devel-opment in agricultural and energy parks and on the cre-ation of an intermodal transportation facility, all in eastMinot. The MAGIC Fund set aside another $500,000 forthe 55th Street overpass in the area. About $1.1 millionhas come back to the fund through repayments on theprojects.
“Part of the mission of the MAGIC Fund, among otherthings, is infrastructure,” said Jim Maxson, chairman ofMinot Area Development Corp (MADC). “I think thecommunity of Minot can be very proud of the energypark. It’s not unsightly. It’s in an area which is properlyzoned. It has access to rail.”
The benefit of the energy park has been apparent withthe first phase of the development, said Jerry Chavez,MADC president. The first company to move into thepark, Pure Energy, invested $60 million in capitalimprovements, he said. Pumpco Energy Services andMagnum Transportation invested additional dollars intheir new facilities.
The MAGIC Fund awarded about $1.7 million to buildout the second phase of the Great Plains Energy Park. Themoney will pay for sewer and water lines, pavement,curb, gutter and street lights.
“It’s more a temporary loan with no interest,” saidChavez, who noted the money is to eventually be repaid.
MADC invested $320,000 of its own money into buy-ing the energy park land back before anyone was think-ing about how oil development might someday affectMinot. Chavez said MADC was looking at the potentialfor advancing future development rather than gaining areturn on its investment. Returning the MAGIC Fund’smoney is more of a priority.
The creation of the energy park promotes economicdevelopment by removing much of the risk for compa-nies looking at locating in a new community, Chavez
IN THIS ISSUESPECIAL SECTION…RECYCLING, CRUSHING AND SCREENINGBe sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.
FEATURES…CAT D7E SOARS FOR T.J. LAMBRECHT ON O’HAREAIRPORT JOBWhen you’re taking on a project at one of the biggest airports in the worldyou don’t want to take any chance, but you also want the best possibleequipment for the job.
RJS CONSTRUCTION GETS BOOST FROM HIGH-SPEED DOZER The general contractor took on a challenging rail-grading project nearGrand Rapids, Minn., with a brand new high-speed dozer and machine-control system in late 2009.
FEDS GIVE APPROVAL FOR NEW $130M OHIO RIVER BRIDGE PROJECTA consultant on the project said he expected construction contracts to beawarded this fall, with work completed within two years.
CONSTRUCTION UNDER WAY FOR DETROITMIDTOWN GREENWAYConstruction started recently on the Midtown Greenway, which by the fallwill be an improved route for pedestrians and bicyclists around Detroit’sCultural Center area.
MORE THAN 1,800 BIDDERS POWER RITCHIE BROS. CHICAGO SALEThe bidders came from 45 states, 30 countries, nine Canadian provincesand one territory.
SALES STRONG AT HILLER AUCTION SERVICESUMMER EVENTA wide selection of excavators, dozers, payloaders, scrapers and truckswere up for bidding.
N.H.’S RYAN AUCTION SALES HOLDS ITS FIRSTVIRTUAL SALE ON WEBWith extensive experience in the auction industry, Ryan Auction Sales CEO E. Douglas Ryan saw an opportunity to break away from traditional auctions through the use of modern technology.
59
46
22
16
12
27
54 CLASSIFIEDS57 BUSINESS CALENDAR68 COMING AUCTIONS
EQUIPMENT…20 BOBCAT Semi-Synchronized Gear Transmission Option22 NLB 325 Water Jet Pump Units
MIDWEST EDITIONCirculated Throughout • North & South Dakota • Nebraska
1999 Fiat FD255 Crawler Dozer, multi shank rear rip-per, approx. 4200 original hours, U/C is approx. 60%life remaining ..................................................$93,500
2004 Komatsu PC300LC-7, Cab, A/C, 60” Long ReachExcavator ......................................................$197,500
NPK Hammers – we have used or rental return hammers for sale all sizes and will fit any modelexcavator ..............................................................Call
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2010 • Page 9
For information on our in-stock equipment, contact Lanny Peterson at:[email protected] or
mobile 1-715-574-8089 or 1-800-242-7113
Large Selection of New & Used Equipment in Stock.AGGREGATE EQUIPMENT
SIMPLICITY portable dual screen plant, 6x16 and6x20 triple deck horizontal screens, 60" underscreenconveyors, 42" cross conveyors, tri-axle chassis withhydraulic leveling ........................................$199,800CEDARAPIDS 4136 Portable twin roll plant, withAllis 5'x16' single deck horizontal screen,Cummins V-12 diesel, on tandem axle chassis withhydraulic leveling......................................$68,000ALLIS H400-SD portable cone plant, Cumminsdiesel, rear feed conveyor, side discharge convey-or, tandem axle chassis with run-on hydraulic jacks..............................................................$172,800
WHEEL LOADERSCATERPILLAR 980G SERIES II, wheel loader(2004), Cat Diesel, 29.5R25 Tires, 7.5 cu. yd.Spade Nose Bucket w/Teeth and Bolt-On Segments..............................................................$159,500
Page 12 • July 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
When you’re taking on a project at one ofthe biggest airports in the world you don’twant to take any chance, but you also wantthe best possible equipment for the job.
With an eye toward the “proven” and aneye toward the future, T.J. Lambrecht tooknotice when Caterpillar came out with theD7E — an all-electric drive track-type trac-tor that claimed to deliver 10 to 30 percentgreater fuel economy and lower lifetimeoperating costs than comparable machines— people at T.J. Lambrecht took notice.
Intrigued by the possibilities of the D7E,Lambrecht decided to take the machine’smeasure.
“We first saw the D7E at Conexpo-Con/AGG 2008. With fuel prices being sohigh at the time, we were looking for somecost-saving measures and with the emissionsregulations involved in so many jobs in theChicagoland area, we thought it would be agood idea to look into this a little deeper,”said Doug Reibel, Lambrecht’s equipmentsuperintendent.
Lambrecht studied the machine in depth,discovering it was the result of 10 years ofresearch and development that led to 100new patents. Lambrecht learned the D7Eprototype went through more than 70,000hours of lab and field tests and the companyknew the machine received a Clean AirExcellence Award from the U.S.Environmental Protection Agency.
All good qualities, but could it handle thework?
What Lambrecht soon discovered led it tobuy the first D7E off the production line.
A big testLambrecht brought a D7E prototype in
for three weeks of tests on a very importantproject: The $8 billion O’HareModernization Program (OMP), which willreconfigure O’Hare International Airport’s
intersecting runways into a more modern,parallel layout.
During the test run, Lambrecht employeesput the machine through its paces, had itpush-loading scrapers and doing general andheavy-cut dozing where they would havenormally used a larger D8T.
The results were satisfying. “When we heard about the fuel savings,
we were afraid the machine would be under-
powered,” said Dan Klingberg, president ofT.J. Lambrecht. “That is not the case. It hasall the power that was advertised.”
Operators loved the D7E, Reibel said. “I actually got to run it myself and it had
a lot of power and we really liked the visi-bility,” he said.
The field test sold Lambrecht on themachine, but having a long track record with
Cat D7E Soars for T.J. Lambrecht on O’Hare Airport Job
see O’HARE page 44
The Cat D7E dozer and the Cat 740 articulated truckmove dirt at O'Hare Airport.
David Nicoll, regional product manager Caterpillar, answers questions about the Cat D7E dozer.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2010 • Page 13
Gehl Company has made some additions to its productlines: Gehl compact articulated loader models 140, 340 and540. These new machines have caught the eye of landscap-ers, farmers, ranchers, stable operators, fertilizer and feedplants, municipalities and grounds maintenance crewsworld-wide, according to the manufacturer.
“We are very excited to offer this new and innovativeproduct line to our dealer network and customers world-wide,” said Daniel Keyes, vice president, sales, marketingand customer support. “The new Gehl articulated loaders filla very important niche in the compact equipment market.With these new models and the Gehl dealer network to sup-port them, Gehl Company is confident these new loaders
will become a vital product for our customers and dealer net-work.”
Three all-new, uniquely different sized loaders aredesigned to fit both the budget and the application at hand.Gehl articulated loaders feature tipping loads ranging from1,900 to more than 5,100 lbs. (862 to 2,313 kg), when notarticulated, and rated operating capacities from 950 to morethan 2,550 lbs. (431 to 1,156 kg). These multi-talentedmachines can run virtually all universal-type attachments,putting tools customers already own to good use.
Compact sizes from as narrow as 41 in. (104 cm) on themodel 140 allow easy access to extremely tight spaces.Articulated steering allows for turns up to 45 degrees, which
further enables these compact loaders to navigate confinedspaces while minimizing damage to sensitive surfaces andreducing tire wear, according to the manufacturer.
Gehl articulated loaders come equipped with Yanmardiesel engines. These quiet and efficient powerhouses fea-ture Interim Tier IV-certified emission technology.Horsepowers range from 23 hp (17 kW) on the model 140 to47 hp (35 kW) on the model 540.
Gehl articulated loaders are designed to go almost any-where and do almost anything. Aheavy-duty oscillating jointoffers 45-degree turning angles to the left and right and 10degrees of oscillation in both directions for optimal stabilityand maneuverability. The bucket and tires follow a constantturn radius, so the rear tires of the loader follow the path ofthe front tires. Narrow machine widths allow access to tight,confined spaces.
Two easily accessible auxiliary hydraulic lines with flat-face couplers power a variety of tools and make attachmentchanges easy. Lift arm and bucket float features allow for“floating” of the lift arm and bucket for light scraping andrearward leveling actions.
The lift arm on the Gehl articulated loaders is designed toachieve maximum strength, visibility and cycle times. Theparallel-type linkage on the models 140 and 340, and “Z”bar-type linkage on the model 540 provide enhanced bucket
breakout forces from 2,433 ft. lbs. on the model 140 to10,749 ft. lbs. on the model 540. The linkage design allowsfor mechanical self-leveling action in both the up and downdirections, improved bucket dump angles at the mid- andtop-ranges of the lift path, as well as increased forward reach.
A complete cab enclosure option is available on the mod-els 340 and 540, providing enhanced comfort and safety forall-day-long operations. Excellent 360-degree visibility isachieved by positioning the operator above the load for safeoperation and increased view of the attachment. A multi-function joystick controls the lift arm, bucket, float, traveldirection, differential lock and auxiliary hydraulic functions.An inching pedal allows operators to vary ground speedwhile maintaining a fixed engine speed, to optimally runattachments while enabling precise speed control.
These new machines are designed, tested and manufac-tured in the United States. Service parts are easily obtainedthrough Gehl’s extensive dealer network and the company’scentrally located parts distribution center.
For more information, visit www.gehl.com.
Gehl Broadens Product Lines With Articulated Loaders
Gehl articulated loaders feature tipping loads rangingfrom 1,900 to more than 5,100 lbs. (862 to 2,313 kg),when not articulated, and rated operating capacitiesfrom 950 to more than 2,550 lbs. (431 to 1,156 kg).
Page 14 • July 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Louisville Location2911 S English Station Road
Louisville, KY 40299502-267-4020 • Fax: 502-261-9251
Toll Free: 866-901-2262
Owensboro Location2235 Ragu Drive
Owensboro, KY 42303270-683-2000 • Fax: 270-683-3727
Toll Free: 877-683-2262
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2010 • Page 15
CT 329DOur D-Series Compact Track Loaders are packed with cus-tomer-recommended enhancements, such as larger operatorstations, quiet pressurized cabs with best-in-class visibility,and curved-glass swing-out doors. These CTLs keep their coolwith innovative cooling systems and optional hydraulicallydriven variable-speed fans that reverse to clear core-cloggingbuildup. Surefooted job-proven steel-reinforced tracks providesuperior traction, longevity, and breakout force. Plus optionssuch as electrohydraulic joysticks, variable boom and bucketspeed settings, and more than 100 attachments that let youtake on even more tasks.Packed full of best-in-class productivity anduptime-enhancing fea-tures, the D-Series aredestined to becomeowner and operatorfavorites.
320DOur D-Series Skid Steers are loaded with customer-recom-mended enhancements, like larger operator stations, quietpressurized cabs with best-in-class visibility, and curved-glass swing-out doors. D-Series innovations include anexclusive cooling system with available hydraulically drivenvariable-speed fan that reverses to clear core-cloggingbuildup. Plus options such as electrohydraulic joysticks,veritable boom and bucket speed settings, and more than100 attachments to let you take on more tasks.Packed full of best-in-class productivity and uptime-enhancing features, the D-Series are destined to becomeowner and operator favorites.
35DThe 35D’s design allows this nimble machine torotate fully without banging its tail into something.Combined with independent-swing boom and 360-degree rotation, it slips into close quarters comfort-ably. And works with ease around obstacles. But it’snot just its shape and small stature that make the35D such a valuable asset. Equipped with standardquick coupler and auxiliary hydraulics, plus any ofthe many available Worksite Pro attachments, it’s theperfect machine for a wide variety of work.
The difference is in the D-tails.
Page 16 • July 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
By Don TalendSPECIAL TO CEG
Superior, Wis.-based RJS Construction Group LLC is notexactly easing into using the fastest grading equipment andtechnology. The general contractor, which has both buildingand heavy highway divisions serving northern Wisconsinand northern Minnesota, took on a challenging rail-gradingproject near Grand Rapids, Minn., with a brand new high-speed dozer and machine-control system in late 2009.
The $10.5 million project is to connect a BurlingtonNorthern Santa Fe rail line to a 3 million-tons-per-year steelproduction facility to be built and operated by Essar SteelMinnesota. The Itasca County Regional Railroad Authorityawarded the contract to RJS, which would manage the proj-ect through the Itasca County Highway Department. All told,grading the 5.8-mi. (9.3 km)-long rail spur necessitated themovement of about 3 million cu. yds. (2.3 million cu m) ofsoil, much of which varied among sand, clay, gravel, dirt,boulders, marshland — and even tailings from an old slurrypit where the byproduct of the taconite production processhad been piped from a nearby operation. The site also wascharacterized by cuts and backslope fills as deep as 57 ft. (17m).
After completing the earthmoving work in conjunctionwith Hammerlund Construction, Grand Rapids, RJS leveledthe subgrade starting in early November in preparation forthe placement of sub-ballast. RailWorks Corp., Lakeville,Minn., would be responsible for rail installation, with thenew spur completed in 2010.
The earthmoving work began in January 2009 and pro-ceeded through March. Following a pause of a few weeksfor the spring thaw, grading resumed in April. By summer,RJS was ready to start employing new tools that promised toprovide a quantum leap in productivity.
RJS Construction Group takes a flexible approach to con-struction markets, according to Dave Lemke, vice presidentof the contractor’s Highway/Heavy Division. “We’re oppor-tunists,” he said with a laugh. “We work within a 150-mile
radius and we’re not afraid to tackle anything. Sewer andwater’s been the big thing the last several years. We’ve alsodone a lot of work with Wisconsin DOT and Mn/DOT andwe used to have a scraper fleet.”
RJS did much of the grading and aggregate work for awidening of State Trunk Highway 53 to four lanes betweenRice Lake and Superior, a roughly 100-mi. (161 km) stretchcompleted in 1999.
“The market has changed and now the highway work is inMilwaukee and the Fox Valley, so we traded in the scrapersand got more into sewer and water work,” Lemke said.Another new market that began to grow within RJS’ geo-graphic area is rail: besides the Essar project, two rail grad-ing projects are scheduled for completion in late 2009 orearly 2010, Lemke reported.
A Flexible Approach to MarketsConsistent with the flexible approach, RJS also keeps
open minds about adopting technology and equipment thatallows the company to successfully enter markets as growthbegins to occur. For example, Lemke and CEO ToddJohnson attended a John Deere product demonstration eventin Sacaton, Ariz., in March 2009 and decided to invest in twonew tools to increase grading productivity, regardless of thetype of project. At the event, Deere showcased its new 764high-speed dozer (HSD), which is designed to allow con-tractors to perform grading and moderate dozing at aboutdouble the speed of a similarly sized crawler dozer, and the3D-MC2 from Topcon Positioning Systems, one of thefastest global navigation satellite system (GNSS) machine-control systems on the market, which can be installed on anydozer, according to the manufacturer.
The idea behind the new dozer is combining the speed ofa grader with the flotation of a crawler dozer so that the con-tractor can handle some tasks that used to require a separatedozer and grader. Additionally, the 3D-MC2 system isdesigned to allow grading with twice the productivity ofother systems, and four times the productivity of gradingwithout the use of machine control.
After the group demonstration of the equipment, Lemkeand Johnson operated the 764 for themselves.
“With very limited instruction, were able to put themachine in gear and actually move some dirt and we’re notoperators,” said Lemke. “We spent a lot of time on thatmachine and spent some time talking to Topcon about the3D-MC2.”
Lemke came away particularly impressed with the hydro-static transmission.
“Using the joystick was very easy, having the machine onfull r.p.m. and letting the computer and engine do its thing,”he said, adding that the machine handled like a passenger carwhen traveling under full load. The next day, they spentabout two hours test-driving and discussing the machinewith Scott Bayless, high-speed dozer product consultant forDeere.
The dozer wasn’t the only tool that RJS discovered at theevent; machine control was new to the company as well. Bycombining the machine and system, RJS could potentiallyincrease its grading speed by up to four times what a con-ventional dozer-grader combination could provide.
Putting Equipment to the TestRJS had received the second 764 HSD ever to roll off of
the assembly line at Deere’s Dubuque, Iowa, facility inSeptember 2009. After some final testing and equipmentpreparation, Deere delivered the machine to its Nortrax deal-ership in Grand Rapids, and the dealer delivered it to the jobsite during the last week in September. By mid-October2009, RJS and Hammerlund Construction had completedabout 95 percent of the grading work for the new rail spur.With about 140,000 cu. yds. (107,037 cu m) remaining, sev-eral excavators dug out the last major cut near the midpointof the new spur and haul trucks raced back and forth, takingloads of dirt to either end. The new 3D-MC2-equipped dozergraded the dirt on the fill while the haul truck drivers did theirbest to keep pace. Dark red taconite fines coated the bottomof everything: equipment, trucks and shoes.
RJS Construction Gets Boost From High-Speed Dozer
see DOZER page 38
Photo courtesy Don TalendThe site was characterized by cuts and backslope fills as high as 57 ft. (17m ).
Photo courtesy Don TalendRJS Construction Group achieved a finish-grading speed of 9 mph (14.5 kmh) withthe new dozer.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2010 • Page 17
Contact Ted Rose or Tim Luby 636-343-9970
www.lubyequipment.com
LUBY EQ. PRE-OWNED
MO: Saint Louis, Cape Girardeau, IL: Quincy, Caseyville, Springfield
OTHER EQUIPMENTGROVE AP 308, 8.5 TON CRANE.........BRODERSON IC80, 8.5 TON CRANE....CAT 60 HYDRAULIC PULL SCRAPER....ATTACHMENTS, RIPPERS, BLADES........CALL!!
HEAVY EQUIPMENT SALES, RENTAL,SERVICE, and PARTS SOLUTIONS
HEAVY EQUIPMENT SALES, RENTAL,SERVICE, and PARTS SOLUTIONS
WWW.JJSCHECKEL.COMWWW.JJSCHECKEL.COM
10-50%LESSTHAN
OEM
100%QUALITYSATISFACTIONGUARANTEE
The parts we sell are some of the best in the industry,manufactured by quality ISO 9001 manufacturers. Parts proven reliable in the most extreme conditions. Call our Parts Department at 563.872.4112 today for all your parts needs!
VISIT WWW.JJSCHECKEL.COM TO VIEW PICTURES AND DETAILED INFORMATION
ON EACH MACHINE.CALL FOR THE BEST PRICES ON UNDERCARRIAGEand REPAIR PARTS IN THE INDUSTRY!
CALL FOR THE BEST PRICES ON UNDERCARRIAGEand REPAIR PARTS IN THE INDUSTRY!
708-878-7070
78 HP Turbo Diesel, 2 Speed, PilotControls, Aux.Hydraulics, EnclosedHeated Cab w/ Wiper,Front and Rear WorkLights, New GPBucket, Never SeenDirt
5.9% Financing* • $3000 Down • $509/Month$28,500 Warranty
TRADESHOW
DEMO2010 CAT 252B SERIES II
*with approved credit
Page 18 • July 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
22000066 KKoommaattssuu DD3399PPXX--2211AADDoozzeerr,, w/EROPS, 6 way blade,#BLCON2....................$$6622,,000000
With Kubota Engines,The Sky’s The Limit.
With Kubota Engines,The Sky’s The Limit.
Clean Running Diesel Engines from 5.6 to 99 HP for OEM, Irrigation, Replacement and Industrial Power Applications
Your complete source of engine and generator power
314-868-8620 www.ckpower.comIn St. Louis, ask for John Costello In Illinois, ask for Dan Fichter
In Missouri & Kansas, ask for Bob Balsat
MAGIC Fund Helps OfferResources For Infrastructuresaid. Having a location that suits their needsand is ready to go also shows the communi-ty’s commitment to the oil industry, he said.
“In this day and age, I believe that com-panies appreciate a community’s interest tooffer a business partnership because we arelooking at the long term,” he said.
Rather than interfere with private devel-opment, the Great Plains Energy Park hasaccelerated private development and encour-aged the start of at least two other energyparks, Maxson said. The successes of thosefirst companies are catching the eye of othercompanies, and that brings opportunities fordevelopers, he said.
“That changes the community of Minotfrom being a concept to being the real deal.It’s difficult to sell concepts. It’s easier to sellsomething that’s real,” he said.
MADC built the Minot Value-AddedAgricultural Processing Complex aroundMinot Milling, which opened in the late1990s. Bio-Exx is working out details forconstruction in the park this year. C & FFoods, which bought the former MG Grainfacility, plans to do construction in 2012,although there’s a possibility some workcould start next year.
“We have on-going conversation withother companies,” Chavez added.
MADC has money invested in the ag parkthrough taxes, plat and zoning fees, surveysand related costs. Much of the developmenthas occurred with the help of the MAGICFund’s nearly $1.4 million investment,though.
Maxson said the growth in the value-added agricultural industry has benefits toMinot beyond job creation. It means highercommodity prices and reduced transporta-tion costs for farmers to get products to mar-ket. Even a small increase in profit for farm-ers in a 250-mi. radius of Minot will have ahuge impact on Minot, he said.
The construction of an intermodal loadingfacility was intended to enhance the attrac-tion of the ag park. The city owns a portionof the assets of the Port of North Dakota.North Dakota Port Services operates thefacility and has an option to buy.
Greg Johnson, president of North DakotaPort Services, said the intermodal facilitycontinues to negotiate with shippers towardthe day when the first container is shipped.The facility is capable of transloading con-tainers that can be carried by truck, rail orship.
Johnson said it is taking time to workthrough the details involved in coordinatingthe various modes of shipping so that thesystem works cost effectively for everyone.
The national economic recession set backefforts because shipping opportunities arereduced.
In the meantime, the Port of North Dakotahas been shipping oil, natural gas liquid andfrac sand for the petroleum industry. It hasassisted in shipments of lumber, oil-fieldequipment, wind energy components andmilitary equipment. Johnson said the portoffers a service to shippers who don’t haverail access or don’t have a labor force to loadproduct.
Johnson foresees the need for moreinvestment in drainage, security and addi-tional rail line at the Port of North Dakota.Current construction of a new building andscale facility, replacing a temporary scale,should be complete in July.
“It’s come a long, long way,” Johnson saidof the intermodal site. “It’s maybe not aheadof hopes, but ahead of reality as you learnwhat reality is. It’s an education.”
MADC also is satisfied with the progressof the facility.
“It’s in its infant steps right now. It’s off toa great start,” Maxson said.
The Minot Area Development Corp. hasbeen bringing economic development proj-ects to the attention of the MAGIC Fundsince 1990.
“We as a community have a lot to beproud of if we take a historical look at theMAGIC Fund,” said MADC chairman JimMaxson.
He noted that Minot voters approved a 1percent city sales tax on May 1, 1990, only ayear after North Dakota voters rejected astate sales tax increase. The city tax was splitwith 50 percent going to capital improve-ments, 40 percent to economic developmentand 10 percent to property tax relief.
By June 1990, the city had created theMinot Area Growth by Investment andCooperation Fund. Over the years, the fundhas invested about $30 million in economicdevelopment projects. Voters extended thetax in 1995 and again in 2004.
“The folks in Minot had faith in the localleadership here in Minot public and privateto handle their money responsibly,” Maxsonsaid. “The faith that has been instilled in thispublic-private partnership by the voters inMinot is something we take very, very seri-ously.”
The fund has survived through roughspots. The city re-wrote the operating rulesafter the public questioned whether therewas adequate accountability. For a time, thefund sat idle because commitments left theaccount with no spare cash.
The fund currently has an uncommittedbalance of $4.2 million. It took in nearly $3million from the sales tax in 2009.
FUND from page 1
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2010 • Page 19
10 REASONS ROCKLAND THUMBS ARE THE BESTPatented Thumb Locks 1. (U.S. Patent 6,209,237)
No drift down with Rockland hydraulic thumbs. No slop or accelerated pin wear!
Cylinder Rod Protection2. Another Rockland exclusive, all Rockland hydraulic thumbs are equipped with cylinder guards.
Heat-treated Replaceable 3.Bushings and PinsAll pivot points are sealed and lubricated.
Easy Transport4. Rockland thumbs will never hit your excavator’s boom when in the transport position. You don’t have to remove a Rockland thumb in order to transport your machine.
Lightweight5.Better machine performance. Why sacrifi ce capacity hauling around more steel than you need?
Narrow Design6. No width or interference problems. Positive 3-point pickup.
Coupler Length Options7. Couplers usually require longer thumbs. Rockland has it fi gured out.
800-458-3773r ock l andmfg.com
Wide Thumb Option8.If your application demands a wide thumb, specify a Rockland wide thumb and get all the other exclusive Rockland features.
Easy Installation9. Rockland thumbs quickly mount to the underside of the excavator stick. No special pivot pins are required.
Quick Shipment10. Order from your favorite dealer today. If he doesn’t have one in stock, we do!
Page 20 • July 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
• No Tools Required• No Expensive
Hardware Needed• No more Rags stuffed
into hoses• No more messy
Plastic Caps• The Ultimate
Contamination ControlTool
• One hand Installation• Eliminate Hydraulic Oil
Spills & Clean up• Quick Installation &
Ease of Usage• Industry Acclaimed• 100% Made in USA• Safe for Personnel &
The FlangeLock Tool allows for the simple sealingof open SAE Code 61, 62 & 62 KAT-Style hydraulicflanges without tools. Constructed out of light-weight high tensile strength T2200 anodized aluminum. Easy on, easy off. Offers a leakproofsolution to hydraulic system and environmentalcleanliness.
Bobcat Adds SST TransmissionOption to Compact Tractor Line
A semi-synchronized (SST) gear trans-mission is now available on Bobcat CT335,CT445, and CT450 compact tractors.
This new, optional transmission features12 forward gears and 12 reverse gears withshuttle-shift capabilities for ease of use. Itcomplements the standard hydrostatic trans-mission (HST) currently offered on thesemodels.
Ideal for customers of all types, the SST
transmission will provide optimal PTO out-put and efficiency. It is designed for use inapplications such as mowing, tilling andother high-demand rear PTO applications. Italso will excel in applications such as spray-ing and seeding, where a specific speedneeds to be maintained, according to themanufacturer.
ALDEN, Minn. (AP) Back when 83-year-old Bill Brysonwas growing up on a farm in southern Minnesota, wetlanddrainage was a way of life.
The goal then was to dig a ditch or lay undergrounddrainage tile to whisk water away and create more land forfarming. That ethic was still strong on a day in 1970 whena Freeborn County official came to Bryson’s farm houseannouncing the county was giving him a new road.
“There’s nothing I need less,” Bryson said. Sitting at his farm house dining room table 40 years later,
Bryson recalled how the proposed road was to go rightthrough the middle of the farm and obliterate 18 acres ofmarshland, despite the fact there were existing roads oneither side of the farm less than half a mile away.
Bryson and his wife decided to fight, and got help from anational organization that was relatively unknown toFreeborn County officials in southern Minnesota, Brysonremembered.
“They didn’t even know what the Sierra Club was,”Bryson said. “They called it the Sahara Club, not Sierra.”
It took 10 years for the legal battle to work its way throughthe courts, including the Minnesota Supreme Court, buteventually the Bryson family won their fight, and the roadwas never built.
The ruling that saved Bryson’s marsh was the first test ofthe state’s 1971 Environmental Rights Act.
It helped set the standard for Minnesota wetland protec-tions, which are among the most stringent in the nation.
Frank Pafko, Minnesota Department of Transportation(Mn/DOT) chief environmental officer and an aquatic biol-ogist, said recently MnDOT and other agencies building orimproving roads that affect Minnesota wetlands have tomeet what amounts to a “no net loss” standard.
“By compensation you are required to, in effect, replacemore than you have taken,” Pafko said.
State officials estimate road and bridge construction bycities, counties and the state affect up to 400 acres ofMinnesota wetlands each year.
If builders’ activities that cause wetland loss can’t changetheir plans to save or recreate a wetland at that same location,they can make a withdrawal on the state’s wetland bankaccount. John Jaschke, Minnesota Board of Water and SoilResource executive director said the wetland bank balance iscurrently in the black — there are more wetlands being cre-ated than are being drained.
Jaschke said Minnesota was among the first states torequire wetland replacement and the creation of a wetlandbank.
Bill Bryson’s wetland never had to be restored, and whilethe background thrum of traffic from nearby Interstate 90 isstill detectable on Bryson’s land, it is much less intrusive ina wetland rich with the sounds of nature.
One estimate said the land which now makes up the lower48 states had 221 million acres of wetlands before white set-tlers arrived.
The estimate states 100 million acres currently remain.
Forty Years Later,One Minn. WetlandIs Still Roadless
Page 22 • July 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ARTBA Chairman Says It’s‘Time to Level With the Public’grow by an estimated 112 million people, to420 million, which by itself will tremen-dously increase demand for all products andcommodities and American jobs. A thirdtruth is that freight demand also will doublein the next 40 years, from 15 billion tonstoday to 30 billion tons.
“For the future, we absolutely need tomake adding significant new capacity to thenation’s highway system a top federal prior-ity. We need to address the known trafficchokepoints and create regional critical com-merce corridors to move goods,” Tate said.”That is not to say that we don’t also need toadd capacity to the other modes. We do,including to our ocean ports and the connec-tions to them. High speed rail could certain-ly compete with aviation at some point.”
In a fiscally-constrained environment,tough choices will have to be made by elect-ed leaders, the ARTBA chairman said.
“Spreading the peanut butter aroundwon’t cut it,” he said. “The question needs tobe ‘What investments will give theAmerican people as a whole the biggestreturn on their investment and help ensure agood quality of life for our grandchildren?’”
Tate lamented the nearly 10-month delayin passage of a new surface transportation
bill and its impacts on the construction mar-ket. The current highway and transit pro-gram law — SAFETEA-LU — expiredSept. 30, 2009. The current law is operatingon its fourth short-term extension — the lat-est one expires Dec. 31, 2010.
“At Caterpillar, we’ve had to lay off morethan 20,000 employees over the past twoyears, in large part, because the domesticconstruction market has been so bad,” Tatesaid. “Contractors will not make investmentsin expensive new equipment if they areuncertain about the availability of futurework. And the truth is, federal funding iswhat drives the state highway and transitconstruction programs.”
The best thing Congress and the presidentcould do to foster economic growth and jobcreation is to pass a robust, multi-year reau-thorization done right after the election orfirst thing in 2011, according to Tate.
“Again — tell the American public thetruth. There will be a direct correlationbetween the economy and quality of life weleave our grandchildren and the investmentchoices the president, this agency and theCongress make in transportation over thenext several years. Failure to make the hardchoices is not an option,” Tate concluded.
BILL from page 1
Feds Give Approval for New $130M Ohio River Bridge Project
MADISON, Ind. (AP) Constructioncould begin this fall on a $130 million proj-ect to replace a deteriorating Ohio Riverbridge after the project received finalapproval from federal officials.
The U.S. Department of Transportationannounced the approval June 17, and thefederal government will provide a $20 mil-lion stimulus grant to help pay for replace-ment of the 81-year-old bridge connectingMadison and Milton, Ky. The bridge has hada 15-ton (13.6 t) weight limit since March2009 after inspectors reported finding“advanced deterioration.”
Aconsultant on the project said he expect-ed construction contracts to be awarded thisfall, with work completed within two years.
John Carr, vice president of Wilbur SmithAssociates Kentucky Division, said plan-ning for a similar new bridge would normal-ly take three years and work on the Milton-Madison Bridge has moved faster than anyother in his 39-year career in the industry.
“The communities wanted a new bridge,”Carr said. “They knew they needed a newbridge … and they were willing to supportwhatever outcomes would lead them tothat.”
The Indiana and Kentucky state govern-
ments will split any cost that isn’t covered bythe federal grant.
Nearly 11,000 vehicles a day use thebridge that carries U.S. 421 over the river.
Plans call for the existing bridge’s steelsuperstructure to be removed and a newbridge built on the existing piers. The newbridge will have two 12-ft. (3.6 m)-widelanes with an 8-ft. (2.4 m)-wide shoulder oneach side, while the bridge now has a pair of10-ft. (3 m)-wide lanes.
Carr said contractors will have to have thebridge reopened in a year. In the meantime,ferry service will be provided near the bridgesite.
That service, however, is expected tocarry only about 40 percent of the bridgetraffic. The Ohio River bridges closest to thespan are either 46 miles downstream inLouisville, Ky., or 26 miles upstream nearthe Indiana town of Vevay.
Federal officials said failure to replace theMilton-Madison Bridge would cause hard-ships for those living on both sides of theriver.
“Replacing this bridge has been a top pri-ority,” Federal Highway AdministratorVictor Mendez said.
NLB 325 Water Jet Unit Now Convertible to 40,000 psiNLB Corp. has extended the operating pressure
range of its convertible NLB 325 Series water jetpump units to 40,000 psi (2,800 bar), making thepressure range available with up to 400 hp (298kW). These units can easily be converted in just 30minutes to operate at 8,000 psi, 10,000 psi, 12,000psi, 15,000 psi, 20,000 psi, 24,000 psi, or 40,000psi (552, 690, 828, 1,035, 1,380, 1,656, or 2,800bar), according to the manufacturer.
Current NLB 325 users do not have to buy anew unit, but can add the ultra-high pressure(UHP) capability with a simple kit. NLB’s provenplunger pump design reduces wear, downtime andoperating costs while simplifying maintenance.
The NLB 325 Series is available in 14 configu-rations to suit users’ needs, with flows from 12 to74 gpm (45 to 279 Lpm) and heavy-duty dieselengines of 365 or 400 hp (272 to 298 kW). All aretrailer-mounted for portability, with 4-wheel elec-tric brakes and a DOT lighting package.
NLB Corp., a leader in high-pressure and ultra-high pressure water jet technology, offers convert-ible models with multiple pressure, flow andhorsepower choices. The company manufacturesa full line of water jetting systems and accessoriesfor contractor and industrial uses, including sur-face preparation, coatings removal, pavementstripe and rubber removal, tank and tube cleaning,concrete hydrodemolition, pipe cutting and more.
NLB Corp. has extended the operating pressure range of its convertible NLB 325 Series water jet pump units to 40,000psi (2,800 bar).
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2010 • Page 23
Page 24 • July 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Multiple Mississippi River Bridge Projects Under Wayriver’s high stages.
Work in the water has been stopped andwon’t be resumed until the river is down,which isn’t expected until almost the middleof July, Greg Horn, MoDOT’s project direc-tor for the bridge, said. “Unfortunately theriver is up and it’s supposed to be up foranother two weeks. We are unable to be outin the river which is a critical path item sothat’s kind of hurting us.
“The job (the overall new MississippiRiver Bridge) is actually going very well—when we’re able to work. We’re very com-fortable with our contractor. They reallyknow what they’re doing—if they couldonly get out there. It’s very frustrating.”
The contractor Horn was referring to isthe contractor for the main span of theMississippi River Bridge—MTA, a jointventure between Massman Construction,Traylor Brothers and Alberici Constructors.
But Horn had cheerier words about theMadison Avenue project, which he said wentvery well.
“Right now we’re ahead of schedule,” hesaid of the project that includes removal andreconstruction of the Madison Avenue andSt. Louis Avenue bridges and razing of theCass Avenue Bridge.
“We’re a quarter of a million dollars underbudget thanks to the innovative ideas fromFred Weber (the contractor) and ourMoDOT team,” he said.
Those ideas included using value engi-neering concepts, Randy Hitt, MoDOTDeputy Project Director, said. For example,some existing abutments were used insteadof removing and replacing them, and somebarrier walls and redundant traffic controlitems were eliminated, he said.
Care was also taken to move some utili-ties in a way that crews wouldn’t have tomove others and efforts were made to saveon form work, Hitt said.
In addition, the team routed detours short-er distances to save money, scheduled workdetours could be minimized and used “prac-tical design” to identify things that could beeliminated and still reach the goal of gettingtraffic across the bridge safely. “It was like,‘It would be nice if we had tons of money,but. . .”
Instead, during weekly partnership meet-ings, the team looked for “different opportu-nities to save money,” he added.
“It was really a combination of manysmall things that add up,” he said.
The project is also exceeding the federalminority work force goals and the disadvan-taged business goals on the project, Hornsaid.
The bridge, like others replaced byMoDOT in the last several years, has awrought iron fence that runs along it, deco-rative lights and sidewalks.
“When I talk about the river bridge proj-ect, most people think about the cable staybridge over the river but they don’t realizethat there are 30 other projects that have to
happen” for successful completion of theriver bridge project, he said at the ribbon-cutting. “This is the first one.”
MoDOT awarded a $4.4 million contractto Fred Weber Inc. in 2009 for razing thethree bridges and rebuilding two of them.
As officials cut the ribbon allowing trafficto use the Madison Avenue bridge, crewswere preparing to take the down the St.Louis Avenue Bridge and begin reconstruct-ing it. The Cass Avenue Bridge was razedwhen the Madison Avenue Bridge camedown in February. MoDOT will seek bids torebuild the bridge in the fall.
“People asked why we didn’t do both atthe same weekend,” Horn said. “We said wewould not close both of these bridges at thesame time so (motorists) could have localaccess.” MoDOT required the contractor tocomplete one bridge before they could closedown the other, he said.
Horn thanked the driving public and areabusinesses and churches “who have beenvery patient as we had this bridge closed andworked with us on the detours.” The area onthe south side of the bridge is largely resi-dential and largely commercial on the northside.
Bob Burns, field representative for U. S.Senator Clare McCaskill at the ribbon cut-ting, commended Fred Weber Inc. for thecompany’s work.
“I’ve known them for a long period oftime,” and the company has “always beenknown as ‘ahead of schedule and underbudget,’” he said. “This bridge is proof ofthat.”
Burns made his comments as cars andtrucks sped by loudly under the bridge. Theroar of passing traffic made hearing difficultbut he called the noise “indications that com-merce is going on,” He added: “That’s awonderful thing.”
The newly completed bridge will “openthe road” so first responders, police and fire-men can get around easier to serve “the
greater good,” Burns said. “Whenever yousee. . .MoDOT working, it’s going to makeit better for everybody.”
Missouri State Senator Robin WrightJones echoed Burns’ comments.
“This bridge is an asset to the neighbor-hood,” she said. “It adds to the ambience ofthe neighborhood. It’s good for transporta-tion and progress. It’s also good to knowwe’ve exceeded our minority and businessenterprise goals on this particular project,and I look forward to continuing that effortas we move on with the other things.”
Wright also commended Weber andMoDOT for their cost-saving efforts.“Considering the economic situation that thestate is facing, it’s very good to have thosewho are working trying to preserve whatdollars we have for future projects,” she said.
Helen Yane, administrative assistant to St.Louis Mayor Francis Slay, said the bridgehad been targeted for reconstruction foryears but that it wasn’t until the MississippiRiver Bridge project was scheduled.
Yane thanked MoDOT for finishing thebridge “without delay and too much disrup-tion.” The project, which can accommodatefoot and bike traffic, fits in well with Slay’s“Open Streets” program, she said.According to the city’s website, the program“provides more space for healthy recreation,encourages St. Louisans to use more sustain-able forms of transportation, and comple-ments the city’s greening initiatives.”
The bridge has a familiar look to it—itincorporates aesthetic elements motorists seeon bridges MoDOT has replaced over St.Louis’ interstates in recent years.
“It’s kind of our new standard,” Horn said.“The look of the bridge is probably a lotnicer because over the years we’ve changedgetting the concrete steel up there to makethem look more aesthetically pleasing withthe wrought iron fences and decorative light-ing.”
The features giving the bridges a uniform
look are low cost, Horn said. “Our first goalis to move traffic, to repair the bridge andkeep the structure in shape.”
The reversible lanes on I-70 will remainclosed for two months while work continueson the St. Louis Avenue Bridge.
“We did that with Madison, too,” Hornsaid in an interview after the ceremony. “Weuse the lanes to build the piers and set thegirders and then we can open it back up.When we took the bridge down, we put allthe material right in the reversibles.”
MoDOT replaced all the other bridges onI-70 about 10 years ago, Horn said. But thebridges closest to downtown weren’treplaced because “we knew the river bridgewas coming and they (the bridges over theinterstate) had to fit in with it,” he added.
According to Horn, there’s “nothing real-ly unique” construction-wise about theMadison Avenue Bridge. The constructioninvolved drilled shafts typical of otherbridges MoDOT has built on I-70. Thegreatest challenge was getting the work donewith a limited staging area and keeping thetraffic going on the interstate with a minimalamount of closures. Lane closures were dur-ing non-rush hour periods.
“We did a lot of work from the reversiblelanes,” he said. “That’s where they staged(the work) and we were able to build thepiers in the center. Had we tried to keepthose open, we would have had lane closuresevery day, and it would have made it muchmore challenging to get it done in that timeframe.
“It’s a lot safer when you have that roomand you can go a lot quicker too.”
Horn credits value engineering conceptsutilized by Weber for the savings in con-struction costs.
In addition, the bid “came in $1 millioncheaper than we had programmed becausethe competition was really tight for that proj-ect,” he said.
“Typically people think you’ve got to addon (to the price) because there are alwayschange orders that run the project over budg-et. In this case right now, we’re a quarter ofa million dollars less than we bid the projectbecause of their (Weber’s) innovated engi-neering concepts.”
Crews will hold off on staining the con-crete on the bridges until the river bridgeproject nears completion and the ramps havebeen installed.
“One of the problems is you have someolder concrete out there and some newerconcrete. It looks kind of spotty,” Horn said.“Instead of doing it in pieces over a four-yearperiod. I want to do it in the last project so it’sall uniform.”
The Mississippi River Bridge projectincludes four or five separate projects inMissouri that tie into the bridge and 25 inIllinois, Horn said. “Illinois has many moreprojects because they have three mile fromthe water’s edge to where they tie into(Interstate) 70,” he said. “We (Missouri)have less than a mile.”
(L-R): MoDOT’s Greg Horn, project director of the new Mississippi River Bridgeproject, helps Missouri State Senator Robin Wright Jones and Helen Yane, assistantto St. Louis Mayor Francis Slay, cut the ribbon opening the Madison Avenue bridgeover I-70 in St. Louis as Bob Burns, field representative of U. S. Senator ClaireMcCaskill, looks on.
BRIDGE from page 1
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2010 • Page 25
Shipping and Handling Additional
Contact – Barry McKeon800-523-2200 Ext. 197 • 610-506-5961 Cell
Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
Set of three Mack Granite Dump Trucks, 1:64 Scale ........$125(3) Caterpillar Earthmovers, D9T, D5M and 315C, 1:87Scale ................................................................................$75
Caterpillar D10T Track Type Tractor, 1:50 Scale ............$75
All New in Box
CALL Toll Free800-523-2200
Ext. 197
Page 26 • July 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Crushing, Screening & Recycling Section
Constantino Lannes, president ofSennebogen North America, recentlyannounced that Leslie Equipment Companyhas been appointed as the newest addition tothe company’s growing distributor networkfor Sennebogen. Leslie EquipmentCompany will represent Sennebogen prod-ucts from eight of its 10 branches located inWest Virginia and southern Ohio. Havingbuilt its success as a John Deere equipmentdealer for more than 38 years, LeslieEquipment Company has provided crawlers,dozers, scrapers, graders, excavators, wheelloaders, compaction and forestry equipmentby direct sales or through its rental division.As a Sennebogen dealer, the company isnow poised to break into new markets.
Opening Up New MarketsTodd Perrine, senior vice president of
Leslie Equipment Company said the compa-ny is recruiting a material handling specialistto represent the Sennebogen line to comple-ment its machinery specialists for earthmov-ing, pipeline and forestry equipment.
“We have people in all other sectors butthis is new for us,” said Perrine, adding thatthe Sennebogen line will be a nice fit for itscustomers in wood yards already usingwheel loaders and skid steers.
“This gets us into material handling situa-tions. However, the big thing for us is havinga dedicated machine line for the scrap yardsand for waterway terminal facilities that areunloading commodity cargo barges withduty cycle machines along the Ohio River.Whether it’s coal, sand, gravel or limestone,any of those commodities being handled byport facilities up and down the river, that isthe new market that we are most excitedabout because we have not been active inthat business before,” he said.
Even though the company has sold equip-ment to port facilities and scrap yards before,it has not been a primary focus until now.
“We have been supplying some machin-ery like wheel loaders and skid steers as wellas all of the support equipment around it. Wehave quoted some long reach excavators forsome of the ports along the river with con-verted machines, but by the time you add thebooms to do the conversions, they are 20
percent heavier than Sennebogen machines.The more money we have tied up, the hard-er it is to be competitive in that market,” saidPerrine.
He pointed out that recently the companylost a deal bidding against Sennebogen.
“We hate to lose any deals and if we canget into something else that offers moreoptions for our customers, then that’s great.Now with Sennebogen, we are truly intomaterial handling because these machinesare designed for doing just that,” he said.
While picking up LeslieEquipment Company helps to fill inthe Sennebogen distribution map, italso opens the door for LeslieEquipment to complement its prod-uct lines for port facilities, forestryand C&D operations with a line ofpurpose-built material handlers.
“For some sectors like the coalindustry, we can meet their needswith some small machines.However, these guys unloadingbarges with conveyors requiringduty cycle machines, we just havenot been able to compete there. Ifyou don’t get the duty cyclemachines then you probably don’tget the skid steer or the wheel loaderup in the yard either. Having thecomplete package for different busi-nesses makes it more appealing tothe customer who wants to deal with a one-stop shop,” said Perrine.
Designed for the JobIn addition to these markets, Perrine also
sees new opportunities for its existing mar-kets by adding Sennebogen machines to itsrental fleet.
“We have ordered three stock machinesfor now. I’m going to put clam buckets onthe 830 tracked machines and put them outon the pipeline business as a supplement tothe rental operation. That’s a market that Iknow will benefit because there are none ofthese machines in the pipeline business rightnow,” said Perrine.
He said their wide stance and good coun-terweight capabilities will provide this mar-ket with lighter machines that reach farther.
“You take a 35 ton excavator for exampleand by the time you put a long reach stickand a clam bucket on it, you find that it’s nolonger very stable because it’s so heavy. Thisis not efficient because you are carryingextra weight, burning more fuel and at theend of the day, you are not getting the pro-ductivity you need out of something that big.But you can take an 830 Sennebogen, whichis 10,000 lbs. lighter, and put a bigger buck-et on it to give it 50 ft. of reach without hav-ing a long stick. You can do that because that
is standard for these machines. They aremade to do these things.”
Perrine said they have been watchingSennebogen’s growth for some time beforecontacting the company through a mutualfriend who worked for a dealer inPennsylvania.
“We got into a situation where we had tocompete against them a little bit and weknew that Sennebogen didn’t have a dealerin West Virginia, so it finally it got to thepoint where we pursued it.”
After a few meetings it became clear thatthe two companies were suited for eachother.
Delivering on the Promise“Sennebogen is a good family owned
business just like we are. We like the way
they do business and the way they buildmachines. Do it right the first time, do theengineering and testing and make sure itdoes what it promises before you put it out inthe field, and don’t let the customer be thetest grounds,” said Perrine.
“These are just some of those philoso-phies they have that match up with ourphilosophies. Treat people right: all businesstransactions are very honest and sincere; weare the manufacturer; you are the distributor;but we are all in it together. We have con-
nected with their values.”With 24 service trucks on the
road and an extensive parts inven-tory backed up by a knowledgeableteam of certified mechanics withyears of combined experience,Leslie Equipment Company placesa high priority on supporting itscustomers. As such, the companyvalues the service and sales trainingsupport that Sennebogen offers itsdealers and it will be taking advan-tage of it.
“Our company knows how totake care of customers. We invest intraining employees, service, parts,sales and administration,” saidPerrine, adding that Sennebogenwill be rolling out an extensivetraining program. It recently attend-ed the Institute of Scrap Recycling
Industries (ISRI) show in San Diego. “Our objective is to make everyone in the
company familiar with the Sennebogenproduct line,” said Perrine.
In turn, Leslie Equipment Company alsowill organize events where invited cus-tomers will have a close look at the greenmachines with walkarounds and short out-door demos in addition to a focused market-ing campaign that includes magazine adver-tisements, flyers and a corporate brochureproduced in-house.
“We are very excited about this opportu-nity, and we are going to invest the time tounderstand the machines and to understandthe people in that business,” said Perrine.
For more information, call 704/347-4910or visit www.sennebogen-na.com.
Leslie Equipment Company Becomes Sennebogen Dealer
(L-R) are Todd M. Perrine, senior vice president, LeslieEquipment Company; Anthony Laslavic, regional salesmanager, Sennebogen LLC; John Leslie, president, LeslieEquipment Company; and David Phillips, store manag-er, Leslie Equipment Company.
Page 28 • July 24, 2010 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
The Grasan 620HD-H road-portablescreening plant consists of a Deister 6 by 20ft. (1.8 by 6 m) triple-deck horizontal screenwith a three-shaft, between-deck drive unit;side discharge conveyor; under-screen finesconveyors; extra heavy-duty frame andwalkways on three sides. Second deck over-size can be blended with top deck oversize.
The unit is mounted on a tandem axletrailer with dual 11:00 x 22.5 tires and there
is ample room under the discharge chutes forradial stackers. Travel dimensions are 51 ft.4 in. (15.6 m) in length and 13 ft. 6 in. (4 m)in height.
The plant typically can be used in quar-ries, sand/gravel pits, mining and concreterecycling operations and Grasan will cus-tomize for specific needs.
For more information, call 419/526-4440or visit www.grasan.com.
620HD-H Portable ScreenPlant Works in Quarries, Pits
The Grasan 620HD-H road-portable screening plant can beused in quarries, sand/gravel pits,mining and concrete recyclingoperations.
New product developments on display included: PowerscreenPegson XH320 impact crusher, Powerscreen Warrior 800screen, Powerscreen Aggwash plant and PowerscreenFinesmaster 120 Compact sand recovery unit.
Powerscreen Getting Bigger, Better at Hillhead ExhibitionPowerscreen, a provider of mobile crushing, screening
and washing equipment, welcomed visitors from across theworld to the Powerscreen stand at the Hillhead exhibition2010.
Powerscreen’s theme for the event was “Getting Bigger,Getting Better.”
“We are entering an exciting time for mobile equipmentwith our machines and technology finding new segmentsand customers where stationary equipment would have beenthe norm in the recent past. Hillhead 2010 gave us the oppor-
tunity to impress on the market our strategic aim of buildingever larger and more productive mobile crushing, screeningand washing equipment as well as illustrating the compre-hensive breadth of our product portfolio,” Pat Brian,Powerscreen’s global sales and marketing director, said.
Visitors saw the Powerscreen Pegson XA750 jaw crusherfeeding the new giant Powerscreen Pegson 1500 Maxtrakcone crusher. Alongside the crushers in the working area wasthe latest and largest addition to the Warrior screen range, thePowerscreen Warrior 2400.
Additional new product developments on display includ-ed: Powerscreen Pegson XH320 impact crusher,Powerscreen Warrior 800 screen, Powerscreen Aggwashplant and Powerscreen Finesmaster 120 Compact sandrecovery unit.
Well established models including the PowerscreenPegson XA400S jaw crusher, Powerscreen Pegson 1000Maxtrak cone crusher and the Powerscreen Chieftain 2100Xscreen gave visitors an overview of the Powerscreen productportfolio.
For more information, visit www.powerscreen.com.The Powerscreen Aggwash plant was oneof the items featured by the companyduring Hillhead 2010.
The Powerscreen Pegson XA750 jaw crusher was inaction for visitors at Hillhead 2010.
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • July 24, 2010 • Page 29
Page 30 • July 24, 2010 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
FINKBINER EQUIPMENT CO.
15 W. 400 N. Frontage Rd.Burr Ridge, IL 60527
630-654-3700Fax: 630-654-5326
AMERICAN STATEEQUIPMENT CO.
2055 South 108th St.Milwaukee, WI 53227
414-541-8700800-236-6900
Fax: 214-541-1892
820A Moasis DriveLittle Chute, WI 54140
920-788-6646800-236-8318
Fax: 920-788-6753
2400 North 14th Ave.Wausau, WI 54401
715-675-6900800-242-7113
Fax: 715-675-9743
RECO EQUIPMENTINC.
66420 Belmont-Morristown Rd.Morristown, OH 43759
740-782-1314Fax: 740-782-1020
1315 Terminal Rd.Indianapolis, IN 46217
317-781-8100Fax: 317-781-8720
4250 Perimeter Dr.Columbus, OH 43228
614-276-0001Fax: 614-276-0676
1040 Reed Rd.Monroe, OH 45050
513-539-5255Fax: 513-539-5256
2841 Brecksville Rd.Richfield, OH 44286
330-659-0800Fax: 330-659-4880
12425 Willliams Rd.Perrysburg, OH 43551
419-874-6001Fax: 419-874-7354
20620 Route 19NCranberry Twp., PA 16066
724-779-4646Fax: 724-779-4611
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • July 24, 2010 • Page 31
SENNEBOGEN green line material handling machines make your competitors “green with envy”SENNEBOGEN green line material handling machines make your competitors “green with envy”
High Productivity – Low Operating Costs
Wixom, MI 248-449-6700
Muskegon, MI231-798-8754
Kentwood, MI616-698-2960
Battle Creek, MI269-965-1269
Romulus, MI734-641-8238
Saginaw, MI989-752-9400
Sterling Hts, MI586-977-6000
Zeeland, MI616-748-4108
Lansing, MI517-272-5033
Wixom, MI (Cons. Division)248-356-5200
Byron Center, MI616-878-7450
Louisville, KY 502-491-4000Evansville, IN812-425-4491
Corbin, KY606-528-3700Lexington, KY859-259-3456Stanville, KY
Morbark’s 5500 stand-alone flail portabledebarker/delimber removes the bark and foliage from treeswhen harvesting wood fiber for high quality chips for use inthe pulp and paper market.
The new flail can be used alone or in tandem with aMorbark whole tree chipper, giving operators flexibility intheir operations.
Those currently supplying the fuel market with chipsfrom a Morbark whole tree chipper now have the option ofcombining that unit with the 5500 stand-alone flail tobranch out into the clean chip market. These two units worktogether as one in-woods system to provide the same end-product as a larger combination flail machine. Agrinder alsocan be positioned under the discharge conveyor to producebiomass fuel simultaneously.
Michael Stanton, assistant sales manager of the MorbarkNortheast Region stated, “The Morbark 5500 is capable ofdebarking logs and tree stems to produce clean chips withbark content of less than 1 percent, which is necessary tomeet the pulp and paper industry requirements. Recent in-field reports have shown very positive feedback in variousspecies of wood.”
The 5500 stand-alone flail is available with either two orthree flails. Weighing in at approximately 50,000 lbs.(22,679 kg), the Morbark 5500 stand-alone flail is easier totransport on and off job sites than larger combination flail
units. Standard equipment also includes the Morbark inte-grated control system, a diagnostic system that monitors thefeed wheel, the hydraulic pressures, and the flail drum speedto maximize performance and minimize fuel consumption.
For more information, visit www.morbark.com.
Morbark’s 5500 stand-alone flail can be used alone orin tandem with a Morbark whole tree chipper.
The DoppstadtUS dealer network is once again growingwith the addition of Gibson Machinery. With offices inOakwood Village, Ohio, and Neville Island, Pa., GibsonMachinery will be representing Doppstadt equipmentthroughout Ohio and western Pennsylvania.
Based just outside of Cleveland, Ohio, Gibson Machineryis a distributor of construction and material handling equip-ment.
“Gibson is one of the most-respected equipment dealers inOhio, and having them on the DoppstadtUS team is tremen-dous,” said Sean Carr, DoppstadtUS regional manager.
“DoppstadtUS is exactly the kind of equipment partner welook for at Gibson, and their market niche complements ourbroader product offerings perfectly,” said Lee Gibson, presi-dent.
Gibson Machinery has conducted numerous equipmentdemonstrations throughout its territory, has already sold sev-eral units and has even entered into a few long-term rentalagreements on special application systems. It also is planninga Demo Days event soon for additional exposure.
Continuing to Grow...DoppstadtUS DealerNetwork Adds GibsonMachinery to Team
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • July 24, 2010 • Page 33
SALES SERVICE RENTALS and PARTSSALES SERVICE RENTALS and PARTS
EFFICIENCY + RELIABILITY = PROFITCALL ON THE EXPERTS.
CONTACT YOUR LOCAL POWERSCREEN PEGSON DEALER TODAY
The best equipment is very important when you are ready to crush andscreen concrete and asphalt. Powerscreen has a proven record makingspec materials for our customers. Please call us with all your crushing,
screening and recycling needs.
ServingINDIANA
Powerscreen of Indiana, Inc.255 N. Hetzler Court
Angola, IN 46703(800) 843-4277
www.powerscreenindiana.com
ServingMICHIGAN
Powerscreen of Michigan7819 West Jefferson
Detroit, MI 48209(313) 841-8370
www.powerscreenofmichigan.com
ServingMINNESOTA
Theco, Inc.5470 Quam Ave. NE
St. Michael, MN 55376(800) 776-0335www.thecoinc.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2010 • Page 37
USED EQUIPMENT
U.S. Hwy 12 WDassel, MN 55325
Bobcat Tractors In Stock Now
320/275-2737 • Toll Free 888/679-4857
Authorized Bobcat® DealerBobcat 440 ................Starting at $4,500Bobcat 463’s ..............Starting at $8,000Bobcat 542B ..............Starting at $6,900Bobcat 642 ..............................$7,500Bobcat 642B ............................$8,500Bobcat 743 ................Starting at $8,000Bobcat 751 ......Several Starting at $9,900Bobcat 753 ..............Starting at $10,000Bobcat 763F, Series, Open Cab ....$11,500
Bobcat 773G, With Heat ............$15,900Bobcat 843, Heated Cab ............$10,000Bobcat 853’s ............Starting at $11,000Bobcat 863, With Heat ..............$12,900Bobcat 863G ............................14,900Bobcat 873 ............................$17,900Bobcat S130, 2006, Heated Cab ......CALLBobcat S185s, With Heat and Air, 500Hours to 5000 Hours....Starting at $14,900Bobcat S250..............Starting at $17,500
Compact Track MachinesBobcat T190’s............Starting at $15,000Bobcat T200..............Starting at $15,000Bobcat T250, Gold ......Starting at $24,500Bobcat T300..............Starting at $25,000Other BrandsGehl 4615 Skidloader, Open Canopy $8,500Mustang 2105 ............................CALLNew Holland L175........................CALLJohn Deere 250/260 Models Available....................................................CALL
ExcavatorsBobcat 331’s, Several w/Heat & Open
Canopys ..................Starting at $15,900
Bobcat 334 ................................CALL
Bobcat 337D, A/C, HT................$35,900
Bobcat 341 ..............Starting at $29,990
Bobcat 442 ....Several Starting at $45,000
Large Used Trailer Selection Starting at $1,500wwwwww..ffaarrmmrriitteeeeqquuiipp..ccoomm
Authorized Bobcat® Dealer
NEW M SERIES IN STOCK!
JCB 215SCall for Pricing and Details
Bobcat Forestry Cutter on T320, for Rent
NEW E60, E35 & E32 Excavators In stock now!Call for pricing and details
Bobcat 417 Versahandler,Call for Price
Bobcat 3400 UtilityVehicle, In Stock Now,Call for Price
For Sale or Rent – Call for Pricing and Rates
Page 38 • July 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
After about two weeks, Kurt Louma had become familiarwith the controls and cab, which had major departures indesign from those in the other dozers and loaders he hadoperated previously. He said he practically felt like he wassitting behind the blade in the fore-mounted operator’s sta-tion, which moves with the 11-ft. (3.3 m), six-way dozerblade as the machine turned. Louma controlled the bladewith a stick to his right; the rear hydraulic controls aremounted to the right of the blade control lever. He controlledthe dozer’s speed and for-ward/neutral/reverse direc-tion with another stick on theleft.
“It’s a unique machine,”said Lemke. “To have thejoystick controls sitting cabforward is a different feel, adifferent look.”
Added Roger Johnson,the project superintendent:“[Louma]’d like to have thesteering wheel taken outnow — he’s getting used tojust using the joystick.”
“Until the hydraulicswarm up, you need to steerwith the steering wheel, butafter that, you don’t need it,”Louma agreed.
The dozer gets a top speedof 16 mph (25.7 kmh) forRJS via a Tier III John DeerePowerTech Plus 6.8-Lengine that outputs 200 nethp (149 kW) at 1,800 rpmand 210 net hp (156 kW) at1,900 rpm. RJS reported thatthe dozer was normally hit-ting 9 mph (14.5 kmh) dur-ing grading on this project. Ahydrostatic transmission,hydrostatic drive train andpowertrain system aredesigned to adjust to maxi-mize power and speed to thetracks under varying loadconditions.
“We’re dumping 40-tonloads and he’s just plowingright through it,” Johnsonsaid of Louma and the newdozer.
The machine also hasarticulated steering and an articulation joint for maneuver-ability when grading around pavement or navigating sideslopes.
A key feature is shorter tracks made of rubber, a materialthat has lower rolling resistance than a conventional steeltrack system, eliminates track segments, and that is used toreduce blade bounce. The shorter length is used so that they
cover less ground than longer tracks while the dozer turns, adesign feature used to extend track life. A combination offriction and positive contact, and track- tensioning systems,also is used to prolong the life of the 24-in. (61 cm)-wide,independently suspended tracks. From a logistics standpoint,the rubber tracks cut down on the need for trailer hauling orlaying out mats to cross pavement, according to the manu-facturer.
Johnson looked forward to using the dozer in situations inwhich the dozer can cross a lot of pavement on and near a
job site. “In residential areas, high-
way work, blacktop — allthat stuff, the rubber trackswill provide a benefit,” hesaid. “You’re not afraid todrive it a mile, whereas witha track machine, you would-n’t dare — you’d just load itup and haul it. And you’vejust got confidence thateverything you’re doing is tograde. The dozer is a uniquetool — that’s for sure. Large,angular rocks are hard on therubber tracks, so on this proj-ect it’s a little tough. But wefound a couple layers ofgranular soil that we put ontop so we can keep going.”
Lemke agreed: “There’s acost factor on the wear andtear on undercarriages; [the764] doesn’t have thatwear,” he said. “With a steeltrack dozer, you start walk-ing it and you’re wearingsteel.”
Lemke did identify apotential advantage of steelover rubber tracks: greaterresistance to track damagefrom sharp rocks like manyencountered on the rail-grad-ing site.
The new dozer also hasinfinite finish speed controlfrom zero to 16 mph andfour speed ranges.
RJS managers reportedthat the company’s experi-ence with machine controlhad been positive to thatpoint. Base stations were setup at either end of the job
site and reception was consistently reliable. “With the markets we’ve been following, we just haven’t
gotten into the large grading jobs until this project,” saidLemke. “[Hammerlund] had the base station and we actual-ly started by buying a rover for checking grade. We have pur
With High-Speed Dozer in Use, RJSGets Leap in Grading Productivity
Machine Control 101— and the Latest
AdvancementGlobal navigation satellite system (GNSS)
machine-control technology is automating grad-ing and excavation. Increasingly, GNSSmachine-control systems are being installed onearthmoving, grading and paving equipmentsuch as excavators, scrapers, dozers and motor-graders, plus milling machines and asphalt andconcrete pavers.
A GNSS machine-control system uses arugged antenna mounted to a shock-absorbing,vibration-damping pole and a receiver boxmounted in a secure location on the machine.Satellites send positioning data to another anten-na/receiver combination at a stationary basestation. Positioning data also are sent to themachine.
The stationary base and machine work togeth-er to provide real-time kinetic (RTK) positioninformation, revealing the machine’s three-dimensional location on a site. Software com-pares the machine’s position to the design gradeat a given location. The design grade informa-tion is provided from site plans.
The design grade data files are loaded into amachine-mounted control box via a USB flashdrive. The control box updates positioning dataand sends signals to the hydraulic valves. Theblade is automatically positioned for elevationand slope. Other sensors inform the control boxof certain machine conditions; for example, doz-ers are equipped with a slope (tilt) sensor on theblade to measure the cross-slope of the cuttingedge. “Indicate systems” like Topcon’s 3-D sys-tems provide visual guidance for machine opera-tors, who manually control the machine to cut orfill to the desired grade.
The 3D-MC2 system is an evolution of themachine-control concept that increases speed.System components include an MC-R3 GNSScontroller that works in conjunction with an MC2sensor that replaces a slope sensor; a four-color,touchscreen, Bluetooth-capable GX-60 controlbox; and a conventional GNSS antenna mount-ed on the dozer blade. The MC2 sensor com-bines a gyro, compass and inertial sensor tomeasure the X, Y and Z position as well as theroll, pitch, yaw and acceleration of the dozer.The technology gives the system the capability toprovide blade position readings up to 100 timesper second. Additionally, testing indicates that thesystem yields about three times the gradingsmoothness of other machine-control systems,according to Topcon.
Photo courtesy Don TalendDave Lemke and RJS Construction, Superior, Wis., takea flexible approach to markets and keep their mindsopen to adopting new equipment that can help thecompany operate profitably, like Deere’s new 764high-speed dozer.
see DOZER page 41
DOZER from page 16
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2010 • Page 39
Gibson Machinery,LLC
Cleveland, OH440/439-4000
Neville Island, PA800/843-1205
Healy MachineryCompany
Sioux Falls, SD605/336-0411
Rapid City, SD605/348-7438Aberdeen, SD605-725-4364
Lano Equipment, Inc.Anoka, MN
763/323-1720Shakopee, MN952/445-6310
Luby EquipmentQuincy, IL
217/222-5454Caseyville, IL618/397-9971Fenton, MO
646/343-9970Cape Girardeau, MO
573/334-9937
Rex SpencerEquipment Co.
Belton, MO816/331-6078
RTL Equipment, Inc.Grimes, IA
515/986-0262Gretna, NE
402/332-2004
Walter Payton PowerEquipment, LLC
Evansville, IN812/422-6912Lebanon, IN
765/482-4145
Page 40 • July 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
65 East Kingston Ave.Columbus, OH 43207614/443-6541614/443-9673 Fax Toledo, OH419/872-7101Cincinnati, OH513/771-3922
Komatsu backhoe loaders are designed to deliver. Attention to every detail ensures the highest levels of operator safety, comfort and convenience, productivity, ease of service, durability, reliability and quality. Komatsu backhoe loaders provide the ultimate comfort and productivity package.
• Low-effort Proportional Pressure Control (PPC) loader and backhoe joysticks with SAE/ISO pattern changer• Spacious and ergonomically designed operator platform and exceptional visibility• Narrow S-shaped backhoe boom and high-performance hydraulics• Tilting engine hood with easy access to service check and fill points• Heavy-duty, 1.25-yard loader with parallel lift and over 6! tons breakout force
When you want the most from your backhoe loader investment, the choice is 100% clear. Put a Komatsu backhoe loader to work today and enjoy the confidence that comes from machines that are…
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2010 • Page 41
AIS CONSTRUCTIONEQUIPMENT CORP.www.aisequip.com3600 N. Grand River Ave.Lansing, MI 48906517/321-8000Fax: 517/321-4191Grand Rapids600 44th Street S.W.Grand Rapids, MI 49548616/538-2400Fax: 616/538-0449Northeast Detroit65809 Gratiot AvenueLenox, MI 48050586/727-7502Fax: 586/727-7311Saginaw4600 AIS DriveP.O. Box 253Bridgeport, MI 48722989/777-0090Fax: 989/777-1583Traverse City8300 M-72 EastWilliamsburg, MI 49690231/267-5060Fax: 231/267-5257
ROLAND MACHINERY CO.www.rolandmachinery.com816 N. Dirksen Parkway,Springfield, IL 62702217/789-7711800/252-2926Bolingbrook, IL630/739-7474800/826-9608Carterville, IL618/985-3399800/274-7202Marengo, IL815/923-4966800/765-2635Portage, IN219/764-8080888/764-8226Escanaba, MI906/786-6920906/786-5813 Fax Bridgeton, MO314/291-1330800/274-7230Cape Girardeau, MO573/334-5252800/274-7210Columbia, MO573/814-0083800/274-7212Palmyra, MO573/769-2056800/274-7214600 Liberty Street,Green Bay, WI 54304920/435-6676920/435-5454 Fax DeForest, WI608/842-4151608/842-4193 Fax Eau Claire, WI715/874-5400715/874-5401 Fax Franksville WI 262/835-2710262/835-2844 Fax Wausau, WI715/355-9898715/241-0044 Fax
Burris Equipment Co.2216 N. Green Bay Rd.Waukegan, IL 60087847/336-1205Fax 847/336-2697
27939 W. Concrete Dr.Ingleside, IL 60041815/363-4100
www.kubota.comEVERYTHING YOU VALUE
BE PREPARED: WHEN YOU PUT THIS KUBOTA TO WORK,EVERYONE WILL WANT A TURN.
The New Kubota L39Tractor/Loader/BackhoeAuto-leveling valve keeps bucket or pallet
forks level Glide Shift Transmission 39 HP Kubota diesel engineIntelliPanel™ digital information centerSide position display for better visibility
and faster, safer operationSlanted hood for better visibilitySide mounted loader control
with arm restQuick-attach backhoe exposes
independent PTO
chased a base station and should receive that in the nextweek or so — so you might say we are now into grade con-trol.”
“[Louma] clips right along. He’s been able to hold a sig-nal. At times, he’ll lose the signal when he dives down, buthe’s getting pretty well used to it now,” Johnson added.
Louma spent several hours getting trained on the newdozer and machine control with representatives from Deereand Nortrax, as well as from his Topcon dealer, Tom Walrathof Positioning Solutions Co., Waukesha, Wis. Machine con-trol “takes all of the guesswork away because it does every-thing,” he said. “All you’re doing is steering it and anglingthe blade.”
Grading Technology Pays DividendsAmid clanging and banging sounds of the excavators
scooping up piles of dirt from the top of the last major cutand dumping them into the haul trucks below,Hammerlund’s project manager recalled how the company’srecently adopted machine-control systems paid dividends onthis project.
“This is the first year that we wanted actual [GNSS] con-trol on the equipment,” said John Abbott.
Hammerlund used two 3D-MC2–equipped Deere 850Jdozers, a Hitachi 650 excavator and a Deere 850D excava-tor on the project.
As with RJS, rail-line grading is a new market sector forHammerlund, which previously focused on city street andhighway paving work. But “It’s the same thing really asbuilding a highway — instead of putting blacktop on it,you’re putting rails on it,” said Abbott.
But this project was far from typical of an earthmovingproject due to the soil conditions, he added. “There are plen-ty of challenges with the soils,” he said. “It’s a previouslymined area, so with a lot of it, you don’t know what you’regetting into. It depends on what they dug up and when theydug it up back in the 1930s, ‘40s and ‘50s.
“But what’s unique about this project is probably thedegree of the slopes and the depth of the cuts — the 2:1s,”he continued, motioning toward a steep, recently gradedslope over through a mine overburden dump that is nearly 60ft. (18 m) high. Machine control had provided a noticeablebenefit in grading consistency down the slope.
“Usually when you see slopes like that they wave, but thisone is straight,” Abbott said. With machine control, “Youlose that grade staker error coming down that slope. Back inthe old days, you put your grade stakes in every 100 feet andyou’d have humps and dips in between them.”
Don Talend of Write Results Inc., West Dundee, Ill., is aprint and e-content provider specializing in covering con-struction, technology and innovation.
RJS Construction Adopts High-SpeedDozer for Leap in Grading Productivity
DOZER from page 38
Page 42 • July 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Naperville, IL 60563630/355-7150Fax: 630/355-7173South Holland, IL 60473708/331-6362Fax: 708/331-7334Rockdale, IL 60436815/730-9011Fax: 815/730-9036
Rockford, IL 60012815/961-3160Fax: 815/965-1810Wauconda, IL 60084847/526-7700Fax: 847/526-3565
WEST SIDE TRACTOR SALES CO.
Louisville, KY 40223502/253-37211-800/507-9705London, KY 606/862-84471-877/231-7151Bowling Green, KY 42101270/842-34001-866/528-9699Richmond, KY859/623-20301-800/463-8722Indianapolis, IN 46219317/544-34111-800/876-4690
Lafayette, IN 47905765/447-69331-800/937-3355Bloomington, IN 47403812/333-96771-800/888-9677South Bend, IN 46619574/232-14611-877/248-1713Fort Wayne, IN 46825260/482-85761-877/845-5764
HOLT EQUIPMENT CO.
651 AIS Drive S.W.Grand Rapids, MI 49548616/530-20001-800/664-3303West Detroit56555 Pontiac TrailNew Hudson, MI 48165 248/437-81211-800/457-8121Traverse City777 US 31STraverse City, MI 49684231/943-39961-800/968-1110
JDE EQUIPMENT
Think ahead.
Just when you thought that nothing beats a JohnDeere loader, along comes our K-Series. Incorporatingmany of their predecessors’ innovative features, thesemachines introduce numerous refinements, plus a 2-3/4-yard model that further defines loader design.More spacious, quieter cabs provide even better visi-bility. Easier-to-read multifunction monitors expandoperator convenience and productivity. And a widevariety of options in both Z-bar and parallel-lift config-urations let you spec the right machine for your work.Looking for a utility loader that’s clearly ahead of thepack? Stop in today or give us a call, and we’ll showyou all the ways these John Deeres will have youthinking K-Series.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2010 • Page 43
BIGBIG
m u s t a n g m f g . c o m
Dealer Imprint
The MTL312 may be small, but it packs a punch. Its nimble width gives the unit an advantage over larger machines.
Turbocharged, liquid-cooled Yanmar • diesel engine delivers 51 hp for exceptional performanceNarrow width of only 58 inches • makes working in tight spaces and near obstacles effortlessSmooth and precise operation with • pilot-operated joystick controlsDedicated undercarriage and • rubber tracks providesuperior traction in muddy and wet environments
personalitySMALL STATURE
TOP NOTCHEQUIPMENT
STAR EQUIPMENT LTD.5505 N. HWY. 169
PLYMOUTH, MN 55442(888) 824-6559
www.topnotchequipment.com
1401 2ND AVENUEDES MOINES, IA 50314
(515) 283-2215FAX: (515) 283-0295
(800) 369-2215
2625 W. AIRLINE HWY.WATERLOO, IA 50703
(319) 236-6830FAX: (319) 236-6834
(800) 791-9249
2950 6TH STREET SWCEDAR RAPIDS, IA 52404
(319) 365-5139FAX: (319) 365-6726
(800) 728-5139
2100 E. LINCOLN WAYAMES, IA 50010(515) 233-9500
FAX: (515) 233-9505(866) 856-2312
Page 44 • July 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Caterpillar and Patten, the Chicagoland Catdealer, was key, too, Klingberg said.Lambrecht owns a large fleet of Cat equip-ment — more than 500 machines — and it’sbeen partnering with Patten CAT since the1940s.
“Caterpillar has a long track record ofhigh-quality machines, which gives us andother customers a comfort level to invest innew machine like this,” said Klingberg.
Emissions ControlsPower and ease of use were important
considerations, but reducing emissions wasalso a factor, Klingberg said.
Air quality standards on the airport projectare strict. By contract, all but the newestequipment is retrofitted with oxidation cata-lysts or particulate filters to reduce emissionsand improve air quality.
The O’Hare project requires a multitudeof sustainable practices organized undereight categories, including sustainable sitemanagement, water efficiency, materialresources and energy concerns.
“We congratulate and thank T.J.Lambrecht for demonstrating leadership andimplementing environmentally responsiblebusiness practices that follow the ChicagoDepartment of Aviation’s SustainableAirport Manual (SAM) guidelines,” saidCommissioner Rosemarie S. Andolino.“The use of state-of-the-art constructionequipment represents a continued commit-ment to our airport sustainable practices.”
Many of the project’s provisions areambitious and mark a clear divergence fromunsustainable practices, including the use ofgreen power and clean-fuel/low-sulfur dieselvehicles during construction.
“The rules at the airport are the strictest inthe region and they watch for compliancevery, very closely, and that of course playsinto all of our purchasing and renting deci-sions,” Reibel said.
The diesel-electric technology of the D7Eoffers unprecedented sustainability benefits.It is designed to burn considerably less fueland consume fewer fluids and parts forreduced owning and operating costs.
The Cat C9.3 ACERT diesel engine, ratedat 235 net hp (175 kW) in the D7E, drives apowerful electrical generator that producesAC (alternating) current. Current flowsthrough special armored cables and military-grade connectors to a solid-state inverter,then to the propulsion module.
“Emissions controls will be more of anissue with every passing year. We’ve seen itat O’Hare and we’re going to see a continu-ation of that across the country,” Klingbergsaid. “With all the issues with emissions andglobal warming, I think this is going to be amuch more important issue not just for our
industry, but all industries in the country.”
Paying DividendsThe O’Hare test helped seal the deal and
in December 2009, Lambrecht took owner-ship of the first machine off the assemblyline. It’s put in about 400 hours at the O’Hareproject since then. Lower operating costshave been a huge upside to theD7E, Reibel said.
The D7E efficiency means itcan use a smaller engine thancomparable competitivemachines, yet outperform them.In addition, the engine runs in anarrow speed range (1,500 to1,800 rpm) to further reduce fuelconsumption and extend enginelife.
“We are using the D7E inapplications we would normallyuse a bigger machine, like a D8,”Reibel said. “So we’re seeingfuel savings of about 20 percent.”
Put another way, the D7E uses6 to 8 gallons of fuel per hourcompared to 10 to 12 for a D8T.
“If you extrapolate, we like toput 1,000 hours on a dozer in a moderatelybusy year, and that’s a significant savings,”Klingberg said. “In 2008, when we werelooking at $4 a gallon for fuel, that type ofsavings adds up quick.”
With 30 percent fewer moving parts com-pared to similar-sized machines, other oper-ating costs have been cut, too.
Electric drive eliminates the torque con-verter, powershift transmission and relateddrive shafts used in all-mechanical designs.Eliminating these components significantlyreduces cooling requirements, decreases thenumber of moving parts and reduces the vol-ume of fluids required. The engine in theD7E is entirely beltless, eliminating the need
for belt maintenance and replacement. “As we put more hours on the machine
and get the results we expect, I’m sure wewill be back at the counter at Patten lookingto purchase more of these D7Es,” Klingbergsaid.
A PartnershipOver the decades, Patten CAT and T.J.
Lambrecht have built a relationship that goesfar beyond just dealer-customer.
“T.J. Lambrecht has been a partner withus for over 70 years. We’ve seen them growfrom two Caterpillar machines to more than500,” said Larry O’Neill, Patten’s executivegeneral sales manager.
And helping customers find innovativeand economical ways to keepworking more efficiently isn’t justgood business, he said. It’s part ofPatten’s DNA as a company.
Klingberg agreed, and praisedPatten for its support through theyears.
“We have an outstanding rela-tionship with Patten. I’ve been herealmost 30 years and for as long asI’ve been here, Patten has beenconsidered a part of our team,” hesaid. “Caterpillar has a great cultureand you can see it passing rightthrough to their dealerships.”
The D7E purchase was a goodbusiness decision. But in the end, itwas also about leadership.
“They are making an investmentduring a tough economic time, but they are aleader in their industry and that’s what lead-ers do,” said Garret Patten, co-dealer princi-pal and general manager of constructionproducts at Patten. “They see that the futureis going to be about sustainability, aboutgreen development, and they want to beleaders in that field, too.”
Lambrecht Puts Cat D7E Through Paces in Airport Project O’HARE from page 12
Ann MacGregor, an operator of T.J. Lambrecht, takes abreak in front of the Cat D7E during the O’Hare Airportproject.
The Cat D7E has been a valuable asset for T.J. Lambrecht during the O’Hare airport expansion job.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2010 • Page 45
McAllister Equipment Co.The Victor L. Phillips Company Roland Machinery Co. AspenEquipmentCompany
Page 46 • July 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Are you responsible for meeting tight deadlines without compromising on quality? At Dynapac, we put all our knowledge and many years of experience into the making of high performance compaction and concrete equipment. We offer an extensive range of large and small construction equipment that are user friendly, rugged and fl exible to your needs. We stand behind you all the way with service and spare parts to ensure your project runs smoothly. Check with us fi rst, when you need heavy duty compaction and concrete equipment that won’t let you down.
Construction Under Way forDetroit Midtown GreenwayBy David RunkASSOCIATED PRESS WRITER
DETROIT (AP) Construction startedrecently on the Midtown Greenway, whichby the fall will be an improved route forpedestrians and bicyclists around Detroit’sCultural Center area and Wayne StateUniversity’s campus.
It’s the first part of a four-phase projectthat by 2012 is expected to link the area withEastern Market and the Detroit riverfront. Itwill widen walkways, as well as add land-scaping, bike racks, benches and small parkareas.
“We wanted to create a more walkabledistrict … and to beautify the neighborhoodand to really help spur on more economicdevelopment,” said Susan Mosey, presidentof the University Cultural CenterAssociation, which is spearheading the proj-ect.
Construction on the first phase, whichincludes about half of a 2 mi. (3.2 km) loopin the area, is expected to cost about $2 mil-lion. In all, project construction could totalabout $12 million. Crews began work April
12 near the Detroit Public Library’s mainbranch.
The greenway is designed to make thearea — which includes the Detroit Instituteof Arts, the Detroit Science Center and theDetroit Medical Center’s main campus —more welcoming to pedestrians and bicy-clists. The loop will be completed in twomore phases, October to June 2011 and Juneto November 2011.
The final phase, to be built April toOctober 2012, will run about 1.5 mi. (2.4km) through the Brush Park neighborhood.
When completed, it will reach EasternMarket, Detroit’s main farmers market. Italso will connect to the Dequindre CutGreenway, a former rail line converted into apedestrian and biking trail that leads to theDetroit RiverWalk.
Funding comes from a number of sources,including the Kresge Foundation, theMichigan Department of Transportation,federal stimulus money and the CommunityFoundation for Southeast Michigan’sGreenWays Initiative. It’s the latest effort tomake parts of the car-dependent Motor Citymore pedestrian- and bike-friendly.
Wisconsin National Guard Looks to Build Drone BaseBy Todd RichmondASSOCIATED PRESS WRITER
MADISON, Wis. (AP) The WisconsinNational Guard plans to build a new $8 mil-lion base for unmanned surveillance dronesat Volk Field.
The 10,300-sq.-ft. facility would replacetwo office buildings that have been a tempo-rary base to four unarmed Shadow drones.Congress has approved about $7.9 millionfor planning and construction; the state willhave to chip in about $415,000, according toestimates. The state Building Commissionvoted unanimously to release $177,460 todevelop preliminary designs.
About 45 National Guard units across thecountry have received Shadow drones, saidCapt. Joy Staab, a Wisconsin NationalGuard spokeswoman. The machines are typ-ically used for scouting and locating poten-tial targets.
The Wisconsin National Guard’s 32ndInfantry Brigade Combat Team’s intelli-gence company received four drones earlierthis year and has been hauling them to FortMcCoy for training missions. The fort’s air
space is the only area authorized for suchflights. Twenty-two soldiers are assigned tothe drones. Lt. Col. Jackie Guthrie, anotherNational Guard spokeswoman, said thedrones will be used in Wisconsin for train-ing, not active surveillance missions.
The machines are now housed in a con-tracting office and a maintenance shop atVolk Field. Guard officials said the buildingsare too small and large equipment must bestored outside in the elements, resulting inmore frequent repairs.
They also said the buildings don’t offerrunway space and don’t meet any Anti-Terrorism Force Protection standards, build-ing codes enacted after the Sept. 11 terroristattacks for Department of Defense structuresto reduce potential damage during an enemyattack. The new base will include a brickveneer, space for drone parking, offices, aworkout facility and locker rooms, similar toa municipal fire station.
According to the Wisconsin NationalGuard’s timeline, preliminary designsshould be finished by fall. Bids will openabout a year later. The base should be com-pleted by the end of 2012.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2010 • Page 47
Page 48 • July 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Howell Tractor2770 May RoadPeru, IL 61354880000//334422--66007722
Fax: 815/224-2538
480 Blaine StreetGary, IN 46406880000//885522--88881166
Fax: 219/977-4220
The Victor L PhillipsCompany4100 Gardner Ave.
Kansas City, MO 64120881166//224411--99229900
Garden City KS662200//227755--11999966
Topeka KS778855//226677--44334455
Wichita KS331166//883388--33334466
Joplin MO441177//778811--88222222
Springfield MO441177//888877--22772299
Mid CountryMachinery
3478 5th Ave South (Bus. Hwy 20)Fort Dodge, IA 50501
880000//220066--55993366
4734 Sergeant Rd. (Hwy 63)Waterloo, IA 50701
331199//223344--88771100
106 8th StreetSergeant Bluff, IA 51054
771122//994433--44447700
SECT IONTrucks & Trailers
Kenworth T440/T470 Offers Body BuilderManual to Help Support Installations
Kenworth Truck Company has pro-duced the 2010 Kenworth T440/T470body builder manual to help supportbody builder installations on the newT440 and T470 truck models.
The Kenworth T440 in tractor andtruck configurations is for regionalhaul, city pickup and delivery, munici-pal and vocational applications. TheKenworth T470 is for snowplow,dump, mixer, winch, refuse, and otherheavy front-axle vocational and munic-ipal applications requiring front frameextensions.
The T470 offers full parent railextensions, delivering maximum resist-ance to bending moment (RBM) fromone end of the rail to the other, accord-ing to the manufacturer.
The 2010 Kenworth T440/T470body builder manual features detailedinformation on vehicle dimensions,
ride heights, suspension layouts,ground and power take-off (PTO)clearances, and frame layouts availablefor both new models. The manual con-tains sections on safety and compli-ance, dimensions, body mounting,exhaust and aftertreatment, frame mod-ifications, electrical system and rout-ings.
The Kenworth T440 and T470 havea gross vehicle rating (GVW) rangingfrom a heavy Class 7 vehicle at 33,000lbs. (14,968 kg) up to a light Class 8truck at 68,000 lbs. (30,844 kg). Boththe T440 and T470 are available with12,000 to 22,000 lb. (5,443 to 9,979 kg)front axles, 21,000 to 26,000 lb. (952 to11,793 kg) single rear axles, and 40,000to 46,000 lb. (18,143 to 20,865 kg) tan-dem rear axles.
The T440 and T470 are standard
with the 2010 PACCAR PX-8 engine at260 hp (194 kW) with 660 lb.-ft. oftorque. Additional PACCAR PX-8 rat-ings are available up to 350 hp (261kW) and 1,000 lb.-ft. of torque.Customers interested in additionalpower can select a 9-L, 2010 CumminsISL engine rated from 345 to 380 hp(257 to 283 kW) and 1,150 lb.-ft. to1,300 lb.-ft. of torque.
The 120-page Kenworth T440/T470body builder manual is useful whenspecifying a vehicle, especially whenthe body builder is involved in the vehi-cle definition and ordering process.Professional body builders often pro-vide valuable information that mayhelp reduce the cost of the body instal-lation.
For more information, visit www.kenworth.com.
Rogers Completes 13-Axle Trailer for Houston HaulerRogers completed an 80-ton (72.5 t) capacity, 13-axle
trailer for a specialized hauling company in Houston, Texas.(The term 13-axle takes into account a 4-axle tractor). Thetrailer employs a “west coast style” suspension that distrib-utes weight to the back six axles using a “rocker shaft” in therear of the trailer.
The air ride suspensions of the first three axles areattached to a sub-frame that “rocks” inside the rear frame;and it balances, like a teeter-totter, with the back three axlesof the “stinger” or bogie.
These suspensions have a special air-height adjustmentsystem that is controlled by hand valves. Each axle of themain trailer is fitted with shut-off valves and chains. Thetrailer, stinger and jeep dolly all have Air Weigh electronicscales installed to measure individual axle loads.
This trailer features a mechanical detachable gooseneckwith a 197-in. (500 cm) swing clearance. It uses the “pin andpaddle” connection method instead of the traditional Rogers“hook and shaft” connection. All of the structural beams arefabricated of 130K psi steel to keep the trailer’s weight to aminimum. The total weight, including the jeep dolly, is64,900 lb. (29,438 kg).
The platform deck is 30 ft. long and 10 ft. wide (9 by 3 m).Because of its modular design, the platform deck can be sub-stituted with another deck style, or a future deck insert can beadded to increase the deck length. It also is equipped withLED lights, three electronic back-up alarms and thirty-six
275/70R22.5 tires. This 80-ton capacity specialized Rogerstrailer, including the 3-axle jeep dolly, is nearly 107 ft. (32.6m) long.
For more information, call 800/441-9880 or visitwww.rogerstrailers.com.
Rogers 80-ton (72.5 t) capacity “west coast style” modular trailer (3+3+3 axles) with 30 ft. L by 10 ft. W (9 by 3m) platform deck. This design allows for the maximum axle capacity permitted by most states — 20,000 lb.(9,072 kg).
Page 50 • July 24, 2010 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
Wildcat 200 Welder Generator Sports Lighter, Smaller DesignDesigned for the maintenance and repair pro-
fessional, farm and ranch operator, and fabrica-tion specialists, the new Wildcat 200 fromMiller Electric Mfg. Co. provides industrialquality welding performance, durability andgenerator power in a compact, lightweight andaffordable package, according to the manufac-turer.
Featuring a fully enclosed case that protectsthe engine and internal welding componentsfrom damage by falling objects, dust and debris,the Wildcat 200 is capable of producing 6,500watts of peak generator power and 200-ampDC Stick and TIG welding output.
At 345 lbs. (156 kg), the Wildcat 200 is morethan 150 lbs. (68 kg) lighter and 30 percentsmaller than other models, providing ownerswith increased work truck storage space andfuel efficiency.
The Wildcat 200 uses a 14-hp (10 kW)Subaru engine and offers a three-year enginewarranty (in addition to Miller’s standard TrueBlue standard three-year warranty on the gener-ator and welder). The 7 gal. (26.5 L) gas tankprovides 12 hours of run time using a 1/8-in. (.3cm) Stick electrode, allowing the unit to put inmore than a full day’s work without needing tobe refueled, according to the manufacturer.
For more information, call 800/426-4533 orvisit www.MillerWelds.com. The Wildcat 200 provides plenty of room for additional tools and equipment even in a standard length pick-up truck bed.
Felling Trailers Raises the Bar With Its Perimeter FrameFelling Trailers has released a perimeter
frame design trailer equipped with an 8 ft. 6in. (2.6 m) hydraulic tail and a 4 ft. (1.2 m)fold under approach plate. The perimeterframe design is typically used by equipmentdealerships and rental companies for thedeliveries of equipment. This trailer designallows multiple units of equipment to beloaded at one time or one larger unit,depending on the customer’s needs.
Felling’s design allows for loading of hardto load low clearance machines with a six-degree slope option at the end of the maindeck. The frame design allows the trailer tobe lightweight and is a practical design toaccommodate a hydraulic upper deck ramp.
Standard with an air ride suspension, itproves to be a very soft yet progressivelyfirm ride as the load weight increases,according to the manufacturer. The air ridesuspension also extends the life of the hingepoints of the tail past that of a spring ride sus-pension.
Standard features include• Deck — white oak• Upper Deck — 90 degrees 10 ft. (3 m)
deck• 8 ft. 6 in. plus 4 ft. hydraulic tail
• Width 102 in. (259 cm) OD• Approx. deck height — 35 in. (89 cm)
loaded• Air ride suspension• Twin lockable toolboxes in deck• 200,000 lb. (90,718 kg) twin 2-speed
jacks• Tie downs — stake pockets and chain
slots every 4 ft. (1.2 m)• 5-year limited structural warranty• 3-year paint warrantyNumerous options also are available.For more information, visit
www.felling.com.
Felling Trailers has released a perimeter frame design trailer equipped with an 8 ft. 6 in. (2.6 m) hydraulic tail and a 4 ft. (1.2m) fold under approach plate.
Felling’s design allowsfor loading of hard to
load low clearancemachines with a six-
degree slope option atthe end of the
main deck.
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • July 24, 2010 • Page 51
Standard with the features you want and built with any options you need, we know the most important thing aboutyour detach is the cargo that it is carrying, that’s why each model is custom designed around your wants and needs.
THE INDUSTRY’S MOST USER-FRIENDLY DETACH
Naperville1400 W. Ogden Ave.
663300--335555--77115500South Holland
310 W. 162 St. Rt. 6770088--333311--66336622
Rockford3110 Prairie Rd.881155--996611--33116600
Wauconda1560 North Old Rand Rd.
884477--552266--77770000Rockdale
600 Walnut Ct881155--773300--99001111
www.westsidetractorsales.com
SScchhaarrbbeerr && SSoonnss,, IInncc.. 13725 Main Street Rogers, MN 55374
Page 52 • July 24, 2010 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
• Lube / Fuel VansSteel or Aluminum
• Lube / FuelPlatforms
• Fuel Trucks
• Mechanics Service Bodies
• Stock Lube Trucks• Stock Water Trucks• Stock Fuel Trucks
FIELD SERVICE EQUIPMENT
Kenworth Adds Workstation Option for Class 8’s With Day Cab
There is an old saying that the job isn’t finisheduntil the paperwork is done. Kenworth is makingthat job a bit easier due to an optional workstationnow available for its T660, T800, W900 and C500models in day cab and extended day cab configu-rations.
Located between the driver and passenger seats,the workstation offers nearly 2 cu. ft. of space forstorage of files, books, small printers and laptops.When opened, paperwork can be completed on a140-sq. in. writing surface. When closed, the 100-sq.-in. top hosts a cup holder, and a pencil tray.Two 12-volt accessory power outlets are built-in toprovide power for computers and other devices.
“The workstation is yet another Kenworthoption available to help drivers become more pro-ductive and comfortable in their Kenworth Class 8trucks,” said Gary Moore, Kenworth assistantgeneral manager for marketing and sales. “Thisoption has already been very popular forKenworth T170, T270 and T370 medium dutytrucks, and we expect it also will do well withKenworth Class 8 models.”
For more information, visitwww.kenworth.com.
Located between the driver andpassenger seats, the workstationoffers nearly 2 cu. ft. of space forstorage of files, books, small print-ers and laptops.
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • July 24, 2010 • Page 53
2007 John Deere 450J, LGP,ROPS, hydro trans., 124’’ 6-way blade, very good condition,1072 hours ................$57,375.2005 John Deere 650J, LGP,ROPS, hydro trans., 128’’screen and sweeps, good con-dition, 1806.................$57,800.
6S8800MT Link Assy., (2), 36section, dry, master pin, 9/16’’bolt........................$849.00 Ea.6S605MT Link Assy., (4), 36section, dry, split master, 9/16’’bolt........................$874.00 Ea.6S9066MT Link Assy., (4), 36section, SALT, split master,9/16’’ bolt ...........$1,099.00 Ea.6Y1339MT Link Assy., (4), 36section, SALT, split master,9/16’’ bolt ...........$1,105.00 Ea.3T6705MT Link Assy., (2), 37section, SALT, split master,9/16’’ bolt............$1,150.00 Ea.
Komatsu D30A, D31A, D31B,D37E, D31S, D31P...
6.0126 Pitch
TR1103211292 Track Pad,(118), 14’’ single grouser, 14mmbolt................$7.39. Ea.TR1113000260 Top Roller (2),complete w/shaft....$82.00. Ea.TR1113000281 Bottom Roller(9), double flange.......................................$103.00. Ea.
G & H Services, Inc.973/383-3370
973/390-7394 CellFax: 373/383-5756
Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢.For just an additional $20 your ad can be posted on our online searchable database for 30 daysAd runs for 2 (two) insertions - no changes in second insertion.PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200CLASSIFIEDS
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2010 • Page 55
Classified...2 Insertions...95¢ Per WordUse the form below to place a classified ad in the Construction Equipment Guide. Itcould bring the inquiry for which you are looking.
One Word In Each Block
CARD MEMBER’S NAME _________________________________________________COMPANY NAME ___________________________________________________
CITY _______________________________________________________________________STATE ___________________________ ZIP __________________________
TOLL FREE 1-800/523-2200FAX 215/885-2910
HEADING (Category to place listing):
Check Enclosed VISA MASTERCARD AMERICAN EXPRESSCARD NUMBER EXP. DATE
SIGNATURE OF AUTHORIZED CARDHOLDER
CLASSIFIED RATES: 95¢ Per Word. Minimum $30.00 (30 words or less). Ad runs for two insertions - no changes in second insertion. Initials count as separate words. Telephone numbers including Area Code count as one word. Please indicate theappropriate heading you wish your ad to be listed under. Payment must be made in full for your ad to run. For just an additional $20 your ad can be posted on our online searchable database for 30 days - use your credit card or send paymentto Construction Equipment Guide.
470 Maryland Drive • Fort Washington, PA 19034Email: [email protected]
Wacker Neuson SE, Caterpillar Sign Strategic AllianceThe relevant executive bodies of Wacker
Neuson SE, Munich, Germany andCaterpillar Inc., Peoria, Ill., have signed anagreement regarding the design, manufac-ture, distribution and support of Caterpillarmini excavators up to 3 tons (2.7 t). The aimof the cooperation is that the two partiesform a long-term strategic alliance.
The agreement with a term of 20 yearsincludes the development and manufactureof mini excavators with an operating weightof up to 3 tons designed to Caterpillar’s spec-ifications at Wacker Neuson’s productionplant in Linz, Austria. Wacker Neuson willleverage its manufacturing and productdevelopment capability to produceCaterpillar mini excavators in the under 3-ton category.
Caterpillar currently offers three modelsin this size range. The new model range willconsist of up to seven machines. The miniexcavators will be produced to Caterpillar’stechnical and brand specifications and willbe distributed and supported via Caterpillar’s
global dealer network, with the exception ofJapan. All Caterpillar models will be clearlydifferentiated from comparable WackerNeuson models in the same product range.The additional volume in the first year of fullproduction in 2012 will more than doublethe existing production volume of compara-ble mini excavators on Wacker Neuson’sproduction lines, according to the manufac-turer.
“We know many customers are lookingfor more options in this size range, and thisalliance will give those customers expandedchoices to help them grow their business,”said Mary Bell, Caterpillar vice presidentwith responsibility for the BuildingConstruction Products Division.
“There also is an ideal cultural fit betweenCaterpillar and Wacker Neuson, as bothcompanies have a strong focus on develop-ing and supporting world class products.Over the years, Wacker Neuson has devel-oped a strong reputation among ourCaterpillar dealers, who have become famil-
iar with Wacker Neuson’s Light Equipmentproducts, which are available at Cat Rentalstores,” Bell added.
The two companies recognize the benefitsand synergies of utilizing Wacker Neuson’sdevelopment and production capacity anddistributing machines via the respectivesales networks — a move that will improveboth companies’ competitive position,according to the companies.
By concentrating production of selectedproducts at Wacker Neuson’s mini excavatorproduction in Linz, Austria, the two compa-nies will leverage joint economies of scale inthe manufacturing and development process,while supplying their respective, comple-mentary sales channels with differentiated,competitive machines.
“We are delighted at the prospect of whatpromises to be a long term strategic partner-ship for both companies as we move forwardand probably will accelerate our investmentin a new and highly efficient mini excavatorproduction plant in Hörsching near Linz,”
explained Georg Sick, CEO of WackerNeuson SE.
The partnership will enable both parties tospread the cost of developing and modifyinglower-emission products across higher vol-umes.
About Wacker NeusonWacker Neuson SE is a global manufac-
turer of light and compact equipment withmore than 30 affiliates and more than 180sales and service stations across the globe.Manufacturing activities are distributedacross three German, one Austrian, twoAmerican and one Philippine productionsites. Almost all products manufactured bythe company are branded Wacker Neuson.The only exceptions to this in Europe areKramer Allrad products and Weidemann-branded agricultural machinery.
For more information about Caterpillar,visit www.cat.com.
For more information about WackerNeuson, visit www.wackerneuson.com.
Page 56 • July 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
The Easy Way To Advertise Your EquipmentValued At Less Than $1 Million Run In TwoConsecutive Issues For $95
2007 Mustang ME3003 - Mini Excavator, withlong arm and 16" bucket, 36 HP, 112 Hrs, Fullwarranty .................................................$23,700
Top Notch Equipment 612/290-0640 14-15 PK
2007 Gehl 7810, Cab/Heat/AC, 2 Speed, HiFlow, Pilot Controls, and FAE150 Brush Mower................................................................$33,200
Top Notch Equipment 612/290-0640 14-15 PK
2009 IROCK Crusher RDS-15 Closed CircuitCrushing and Screening Plant.
For more information call Sean Donaghy at 330/931-9595 15-16 EB
Leroy Fritsch, Sheboyhan, WI920-452-5426 • Cell: 920-627-4526 14-15 AP
2002 John Deere 250 Open Station, 1810Hrs, weight kit, KV0250A351153 ...........$12,500
763/444-8873 14-15 PK
22000066 MMaanniittoowwoocc 1122000000 CCrraawwlleerr CCrraannee,, 120 Ton,180'/40', upper boom point, block, ball. Self erectionpackage, aux drum prepped, free fall on main and reardrum, A/C, Serviced and ready to work!.............................................................................PPrriiccee RReedduucceedd $$662255,,000000
CCaallll 880000--995500--33332211 AAsskk ffoorr GGlleennnn EEnnggeellsswwwwww..wwhhiitteessttaarrmmaacchhiinneerryy..ccoomm 14-15 JM
New 2008 IR TC13 Radio Remote ControlledTrench Compactor, 33.5” Drum Width $15,900
Call John at 414/303-9060 15-16 JM
The 2010 EZ Screen 1200XL, with a 5'x6' screen box,and a patented non-hydraulic screen drive. The EZ1200XL works with a 1/2 to 2 yard loader. Now with a20 Horsepower Deutz Diesel Engine....................................................................................$39,500 plus freight
Other Screens Availablewww.ez-screen.com • 866/745-5828 15 EB
Backhoe Owners Can Now Order A Patented Quick-Tach Fender that has been developed for the front
wheels of JD 310, 410 or Cat C & D Series BackhoeLoaders. Patent # 6533323. To order call M&W
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2010 • Page 57
The Easy Way To AdvertiseYour Equipment Valued AtLess Than $1 Million Run InTwo Consecutive IssuesFor $95
LLaarrggee TTrreenncchh BBooxx 2200 xx 1144 xx 1122,, 25,000 Lbs. ArchedTrailing End ....................................................$$2233,,000000
CCaallll RRoonn aatt 221177//330066--33113344 14-15 AP
July, 2010 – Calendar of Events. Illinois Association of AggregateProducers (IAAP)
July 27, 2010: McHenry County Gravel Advisory Council Meeting;McHenry County Government Administration Building, Woodstock, Illinois
July 30, 2010: IDOT Bid Letting; Hanley Building, Springfield, IllinoisFor more information on these events, please contact IAAP, Springfield,
Illinois at (217) 241-1641 or www.iaap-aggregates.org.July 20, August 18, September 15, 2010 – Golf Outings. The CAM
(Construction Association of Michigan) Golf Committee’s 2010 CAM GolfOuting Schedule which features four value-packed outings at remarkableprices include dates June 15 Devil’s Ridge Golf Club - Oxford; July 20Dunham Hills Golf Club - Harland; August 18 Fieldstone Golf Club - AuburnHills; September 15 Cherry Creek Golf Club - Shelby Township. For moreinformation and any other questions please contact Diana Brown at (218)972-1000.
Mining New Members. Everyone knows word-of-mouth advertising fromsatisfied customers brings more business to your company. As an IAAPmember, you have experienced valuable benefits from membership in thisAssociation and along the way maybe you have talked with others in theindustry about joining the IAAP. Your efforts are now being rewarded througha new member recruitment program called “Mining New Members.” Formore information, please contact IAAP Outreach Manager Shawn McKinneyat (217) 241-1639 or [email protected].
July 28, 2010 – Seminar. AGC of St. Louis presented by theSupplier/Service Provider Council (One Hour Early Bird Seminar from 8:00to 9:00 A.M.) “Fraud Detection and Prevention.” This seminar will discussa general overview of fraud, specifically with construction contractors,measures to prevent the occurrence of fraud, procedures used to detectfraud if suspected, and what happens (or should happen) after fraud isdetected. No cost for AGC of St. Louis members. Non member fee is$25.00 per person. Please register by July 21, 2010 online athttp://events.agcstl.org/imispublic. Questions? Call the AGC of St. Louisoffice at 314-781-2356.
August 9, 2010 – Golf Outing. IAAP Annual Golf Outing, Panther CreekCountry Club and Piper Glen Golf Club, Springfield, Illinois. The scrambleformat utilized at both courses makes this annual outing a fun, relaxed
event. For more information, contact Glenda Schoening at (217) 241-1639 or email [email protected].
August 11, 2010 – Happy Hour. The AGC St. Louis ConstructionLeadership Council Happy Hour is Wednesday, August 11, 2010. Theevent will be held at Trailhead Brewing Company, 921 South RiversideDrive, St. Charles, MO 63301 at 5:00 P.M. There is no charge to attend.Attendees are responsible for their own drink purchases. For question,contact Danielle Kopriva at [email protected]. See you there!Associates General Contractors of St. Louis, Phone: (314) 781-2356.
September 13, 2010 – Meeting. To all IAAP Members! Register nowfor the 7th annual meeting of the Transportation for Illinois Coalition to beheld on Monday, September 13th at the Wojcik Conference Center atWilliam Rainey Harper College in Palatine, and begins with an addressby Congressman Jerry Costello (D-Belleville). For those who want to staythe night before the event and/or after the meeting, TFIC has reserved ablock of rooms at the Embassy Suites Chicago, Schaumburg, Woodfield.This hotel is within 10” of the Harper College conference center. The roomrate is $139/night. Contact information for the hotel is telephone: (847)397-1313 or Fax: (847) 397-9007. John Henriksen, ExecutiveDirector, Illinois Association of Aggregate Producers, Cell: (217) 899-7389; Office: 217-241-1639; Fax: (217) 241-1641 and email:[email protected].
September 25 thru October 1, 2010 – Course. AGC of America (TheAssociated General Contractors of America) is offering this 5-day coursewith experienced project managers and project engineers instruction onproject planning, safety management, construction productivity, subcon-tractor/vendor management, CPM scheduling, claims management, legalissues/contract clauses, construction ethics, cost control, project recordkeeping, communications, leadership/human resource issues, time man-agement, problem solving and decisions making, and blending family andwork. Early bird registration available: Register by July 15, 2010 and
receive $5.00 off your tuition! Hotel information: Dolce Hayes Mansion,San Jose, CA (408) 226-3200 and Contact information: Contact [email protected] for more information.
DONATION - HELP Support IAAP’s Political Activities – The IAAP PoliticalAction Committee (PAC) was created in order to provide financial supportfor our allies in the Illinois General Assembly. Whether from Chicago orDownstate Illinois, Democrat or Republican, these legislators all have onething in common – they support bills that help the Illinois aggregates indus-try and oppose bills that hurt our interests. As the cost of political cam-paigns continues to rise, we want to ensure that legislators who support thisindustry can compete and continue to do good work. For that reason, sup-porting the IAAP PAC is critically important to the future of our industry, yourcompany, and your Association’s political activities. Please consider send-ing a donation, payable to the IAAP, to: John Henriksen,Secretary/Treasurer, IAAP PAC, 1115 S. 2nd Street, Springfield, Illinois62704.
INFORMATION - AGC of St. Louis Governmental Affairs LegislativeUpdate: Legislative Alert – New Illinois Law Could have SignificantEffect on Contractors. The AGC of St. Louis has become aware of a newIllinois law passed that could have a dramatic effect on our members whoperform work in Illinois. On June 16, Illinois Governor Pat Quinn signedHouse Bill 6349 into law which enhances the Illinois Workers on PublicWorks Act. From: AGC of St. Louis Governmental Affairs (mail to: [email protected]).
INFORMATION - The Transportation for Illinois Coalition (TFIC) has pub-lished and electronic version of it’s most recent white paper, an analysis ofthe 2009 capital program. To download a copy of this document, go to theTFIC website: http://www.tficillinois.org, click on publications and open thefile entitled Capital Funding for Transportation. Questions? Please feel freeto contact John Henriksen, Illinois Association of Aggregate Producers,1115 South 2nd Street, Springfield, IL 62704. Office: (217) 241-1639.Cell: (217) 899-7389. Fax: (217) 241-1641.
AGC Volunteer Appreciation - The AGC of St. Louis is grateful for themany members who serve on committees. The time devoted by these indi-viduals and the knowledge they share with the industry in very important tothe success of the AGC.
BusinessCalendar
Page 58 • July 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
WE ARE BUYING EQUIPMENT! • CAT,KOMATSU, VOLVO, KAWASAKI, CALLUS! • WE WANT TO BUY YOUR EQUIP-MENT! | WE BUY CAT, KOMATSUWHEEL LOADERS, EXCAVATORSMOTOR GRADERS & DOZERS • WE ARELOOKING FOR ALL SIZES OF CAT &KOMATSU WHEEL LOADERS ANY YEAROR MODEL. WE ALSO BUY CAT &KOMATSU MOTOR GRADER, EXCAVA-TORS AND DOZERS. WE ALSO BUYANY/ALL PARTS MACHINES.CALL SCHEER BROTHERS, LLC ASKFOR RHONDA OR DAVEContact: RHONDA OR DAVID SCHEERPhone: 610-544-3399Email: [email protected]––––––––––––––––––––––––––––––––CAT MOTOR GRADER 140HContact: PATRICKEmail: [email protected]––––––––––––––––––––––––––––––––966F, 966FII, 966G, 140G • I WANT TOBUY 966F, 966FII, 966G, 140G 1984OR UP MODEL.Contact: SALAHPhone: 1-917 416 6921Fax: 1-718 472 2277Email: [email protected]––––––––––––––––––––––––––––––––TRAILER OR TRUCK ATTENUATOR •ATTENUATOR TRAILER OR ATTENUA-TOR TRUCKContact: ALBERTO ARADILLASPhone: (956) 645-7379Email: [email protected]––––––––––––––––––––––––––––––––CAB FOR 3020 JD • CAB FOR 1968 3020PREFER ACContact: ALBERT SKEENPhone: 276-791-0832Email: [email protected]––––––––––––––––––––––––––––––––SALVAGE TRUCKS AND EQUIP • WANTED DEAD OR ALIVE BROKENDOWN,WORN OUT TRUCKS AND EQUIPFOR SALVAGE,CASH WAITING . WESELL TRUCKS AND PARTSContact: HAPS USED TRUCK SALVAGEPhone: 610 858 4092Email: [email protected]––––––––––––––––––––––––––––––––EQUIPMENT FOR SALVAGE • WE AREBUYERS OF CONSTRUCTION EQUIP-MENT BOTH FOR SALVAGE ANDRESALE. WE BUY DOZERS, EXCAVA-TORS, WHEEL LOADERS, AND OFFHIGHWAY ARTICULATED TRUCKS.WEST COAST PREFERREDContact: PATRICK E KELLYPhone: 800-403-2263Fax: 716-891-4311Email: [email protected]––––––––––––––––––––––––––––––––USED / BROKEN / SURPLUS HOTSTICKS • WE BUY USED, BROKEN, ANDSURPLUS HOT STICKS. IF YOU HAVESOME AVAILABLE, PLEASE GIVE US ACALL OR SHOOT US AN • EMAIL ANDWE’LL WORK OUT A GOOD PRICE. WETAKE CARE OF ALL THE SHIPPING.Contact: NICK | Phone: 206-274-1678Fax: 206-694-2723Email: [email protected]––––––––––––––––––––––––––––––––
CASE 590 SUPER L 4X4Contact: KEVINPhone: 856-297-4758Fax: 856-362-5602Email: [email protected]––––––––––––––––––––––––––––––––IR CM780 • LOW HOUR IR CM780Contact: KENNETHPhone: 270-287-7990Email: [email protected]––––––––––––––––––––––––––––––––CASE 821C WHEEL LOADERContact: FRANK HORAN TRICO EQUIP-MENTPhone: 800-654-USED (8733) ext. 1230Email: [email protected]––––––––––––––––––––––––––––––––SKIDSTEERS LOADERSContact: KENNETH YOUNGEmail: [email protected]––––––––––––––––––––––––––––––––GEHL AL20 WHEEL LOADERContact: ALLANPhone: 651-271-7254Fax: 715-386-9515Email: [email protected]––––––––––––––––––––––––––––––––RECENT MODEL FRONT LOADING 2050CYD SHOVEL • MACHINE NEEDS TO BEIN PA • MAYBE CABLE OR HYDRAULIC20-50 CU YD SHOVELContact: JOE DYGASPhone: 515-834-9220Fax: 515-834-9221Email: [email protected]––––––––––––––––––––––––––––––––307D MINI HYDRAULIC EXCAVATOR •NEEDS TO HAVE RUBBER TRACKS.Contact: MIKE or DALE MILLERPhone: 724 428 4022Email: [email protected]––––––––––––––––––––––––––––––––307D MINI HYDRAULIC EXCAVATOR |NEEDS TO HAVE RUBBER TRACKS.CONTACT MY SON MIKE MILLER @ 724 428 4022Contact: DALE MILLERPhone: 724 428 4022Email: [email protected]––––––––––––––––––––––––––––––––CATERPILLAR 420E BACKHOEContact: CREEDPhone: 2307764Email: [email protected]––––––––––––––––––––––––––––––––MORBARK 13 OR 15 CHIPPER WHOLEOR PARTS | LOOKING FOR A CUTTERHEAD FOR A MORBARK 13Contact: TIM LEWANDOWSKIPhone: 724-887-9375Fax: 724-887-4899Email: [email protected]––––––––––––––––––––––––––––––––CAT 315CL 3000 HRS MAX GOING TONE | AUX HYDS. A PLUSContact: RICHARDPhone: 603 828-6100Email: [email protected]––––––––––––––––––––––––––––––––JRB FORK ATTACHMENT FOR 410EContact: LEON MARTINPhone: 717-587-0311Email: [email protected]––––––––––––––––––––––––––––––––
KOBELCO EXCAVATOR | LOOKING FORKOBELCO EXCAVATORS SK200/210 AND300 MUST HAVE GOOD U/C AND BE INGOOD RUNNING CONDITION. MUST BECLOSE TO AUCTION PRICES. MUST BE IN THE U.S THANK YOU,Contact: RANDY REECEPhone: 770-966-9056Fax: 770-966-9035Email:[email protected]––––––––––––––––––––––––––––––––CAT WHEEL LOADERS | WE NEED CATLOADERS 916 AND 950B.WE NEEDALSO HITACHI CHAIN EXCAVATOREX200-1.DYNAPAC ROLLERSCA25D,CA30D AND CA251D.Contact: RIZWANPhone: +92-345-6429345Fax: +92-213-6057723Email: [email protected]––––––––––––––––––––––––––––––––CAT D7R WITH RIPPER AND 3306ENGINE UNDER 9000 HOURS Contact: NATACHAPhone: 0033-698-17-4467Email: [email protected]––––––––––––––––––––––––––––––––CATERPILLAR PIPELAYERSI WANT TO BUY CATERPILLAR PIPELAYERS MODEL 594, 583, 572, 571Contact: TONY THOMASPhone: 818-956-5231Fax: 818-956-5239Email: [email protected]––––––––––––––––––––––––––––––––CAT 992DCLEAN & WORK READY GOING TO NEContact: RICHARDPhone: 603 828-6100Email: [email protected]––––––––––––––––––––––––––––––––ATLAS COPCO D711 BLASTHOLE DRILLI WANT TO BUY ATLAS COPCO D7-11BLASTHOLE DRILLS.Contact: TONY THOMASPhone: 818-956-5231Fax: 818-956-5239Email: [email protected]––––––––––––––––––––––––––––––––ROTARY PILING RIGContact: SUNIL PATELPhone: 91-22-26736947Fax: 91-22-26732978Email: [email protected]––––––––––––––––––––––––––––––––KUBOTA KH28 FOR PARTSFINAL DRIVES COMPLETE OR GEARSMAIN PROBLEM PN 68241-13410.WOULD TAKE A COMPLETE MACHINEOR WHAT YOU HAVE LEFT OF ONE1984 KH-28 KH-170 IS THE SAME.Contact: BOB ZUZNISPhone: 845 221 2603Fax: 845 221 2603Email: [email protected]––––––––––––––––––––––––––––––––KOMATSU WA3803 | EROP WITH AIR.WORK READY CONDITION. GP BUCKET.Contact: PATRICK KELLYPhone: 800-403-2263Fax: 716-891-4346 Email: [email protected]––––––––––––––––––––––––––––––––
NEED TO BUY A RIPPER FOR 8230BTEREX DOZERContact: JAKE DATESPhone: 315-879-0806Email: [email protected]––––––––––––––––––––––––––––––––CASE LOADER BACKHOE 580L OR580SL • CASE LOADER BACKHOES2 WHEEL DRIVE 580L OR 580SLENCLOSED CAB, REASONABLE PRICEGOOD COND!Contact: FRANK ZACCARINOPhone: 973-650-9268Email: [email protected]––––––––––––––––––––––––––––––––MORBARK MODEL 13 OR 15 IN NEEDOF REPAIR • MORBARK 13 OR 15 WITHBAD ENGINE OR IN NEED OF REPAIRContact: TIM LEWANDOWSKIPhone: 724-887-9375Fax: 724-887-4899Email: [email protected]––––––––––––––––––––––––––––––––KOMATSU LOADER, WA100, WA150,WA200 • IF YOU HAVE KOMATSULOADER, LIKE WA100, WA150, WA200,WA250 ETC. PLEASE EMAIL, PLEASEDO NOT PUT YOUR MACHINE ON AUC-TION, SELL YOUR MACHINE TO ME, ICAN PAY 100% IN ADVANCE IF YOURMACHINE IS GOODContact: IBRAHIMEmail: [email protected]––––––––––––––––––––––––––––––––LOADER BACKHOEContact: FRANK HORANPhone: 732-674-2095Fax: 856-697-4842Email: [email protected]––––––––––––––––––––––––––––––––BUCKET | NEED A HD ROCKET BUCKETTO FIT A KOMATSU PC800-8 78-84"WIDE 6-1/2-7-1/2 CU YD. NEED ASAPContact: LARRY LEISTIKOWPhone: 608-438-1783Fax: 608-655-1300Email: [email protected]––––––––––––––––––––––––––––––––CATERPILLAR MOTOR GRADER 140G •PLS SEND WHOLESALE, UN-ADVER-TISED UNITS OFFERS FOR 140GS WITHREAR RIPPER IN 72V SERIES, YEAR1985 TO 1995.Contact: ATHER A. SIDDIQUIPhone: +92-333-2240692Email: [email protected]––––––––––––––––––––––––––––––––KOMATSU PC95 OR EQUIVLENT •CLEAN & WORK READYContact: RICHARDPhone: 603-828-6100Email: [email protected]––––––––––––––––––––––––––––––––30 FOOT ALUMINUM END DUMP TRAIL-ER • LOOKING FOR OLDER MODEL 30-32 FT. FRAME TYPE ALUMINUM ENDDUMP TRAILER.Contact: MIKE PIEPERPhone: 319-372-2276Fax: 319-372-2277Email: [email protected]––––––––––––––––––––––––––––––––
TERRAMITE T5C FRAMEFRAME FOR SPECJ1040 MARCH 1997,6000LBContact: DAVID PARSONSPhone: 304-733-5098Email: [email protected]––––––––––––––––––––––––––––––––D8H WITH 4BARREL RIPPERContact: PAUL T. REEVESPhone: 336-363-4110Email: [email protected]––––––––––––––––––––––––––––––––PC300LC5KOMATSU PC300-5 OR PC300-7,PC400-5PC400-7 PC228US-3Contact: JIMPhone: 626-443-2443Fax: 626-443-4674Email: [email protected]––––––––––––––––––––––––––––––––MORBARK 13 OR 15 CHIPPERLOOKING FOR A CUTTER HEAD FOR AMORBARK 13 CHIPPERContact: TIM LEWANDOWSKIPhone: 724-887-9375Email: [email protected] |––––––––––––––––––––––––––––––––KUBOTA 6100 FRONT END LOADERFRONT END LOADER FOR 1981 KUBOTA6100, DID SEE A MODEL NUMBER OF B219 MANUFACTURED BY OTHER THANKUBOTAContact: SCOTT WESTPhone: 330-958-1426Email: [email protected]––––––––––––––––––––––––––––––––2007 CATERPILLAR D6N LGPLOOKING FOR A 2007 CATERPILLARD6N LGP EQUIPMENT.Contact: DAVEPhone: 813-464-2163Email: [email protected]––––––––––––––––––––––––––––––––BOB CAT GLASS DOOR S185Contact: WAYNEPhone: 1-810-724-6131Email: [email protected]––––––––––––––––––––––––––––––––FORK FRAME AND FORKS JCB WHEEL LOADERLOOKING FOR JCB QUICKHITCHCOMPATIBLE FOR A 426 HT NEED FORKFRAME AND FORKSContact: DANIEL PETERSPhone: 920-471-4296Fax: 920-491-1027 |Email: [email protected]––––––––––––––––––––––––––––––––REGULATEUR DE DEBIT POURCHARGEUR SUR PNEU O ET KContact: KEFIFPhone: 00213661200428Fax: 0021341468376Email: [email protected]––––––––––––––––––––––––––––––––LAY-MOR BROOM 6HB, EXCELLENTCONDITIONContact: A.H. CORNELLPhone: 215-343-1830––––––––––––––––––––––––––––––––
CATERPILLAR AND KOMATSU PIPELAYERSWE WANT TO BUY CATERPILAR 572G,583K, 594H PIPELAYERS ALSO LOOKINGFOR KOMATSU D355C PIPELAYERS. NOBROKERS PLEASE. WE ONLY BUYFROM END USER.Contact: TONY THOMASPhone: 818-956-5231Fax: 818-956-5239Email: [email protected]––––––––––––––––––––––––––––––––JIB POLEI HAVE A TEREX 41M BUCKET LIFT ONMY TRUCK. I NEED THE FIBERGLASSJIB POLE PART # 0454002Contact: DAVID LARAIAPhone: 860-250-6659Fax: 860-432-0641Email: [email protected]––––––––––––––––––––––––––––––––HYDRAULIC EXCAVATORMACHINE WITH LESS THAN 3000 HRS.70 LONG STICK AND 2 YD BUCKET. E-MAIL PICTURES, LOCATION AND PRICEContact: BEAUFORD MULLINSPhone: 260 497 0500Fax: 260 490 8217 |Email: [email protected]––––––––––––––––––––––––––––––––CAT, KOMATSU, VOLVO, KAWASAKI,CALL US!WE WANT TO BUY YOUR EQUIPMENT!WE BUY CAT, KOMATSU WHEEL LOAD-ERS, EXCAVATORS MOTOR GRADERS &DOZERS WE ARE LOOKING FOR ALLSIZES OF CAT & KOMATSU WHEELLOADERS ANY YEAR OR MODEL. WEALSO BUY CAT & KOMATSU MOTORGRADER, EXCAVATORS AND DOZERS.WE ALSO BUY ANY/ALL PARTSMACHINES. CALL SCHEER BROTHERS,LLC ASK FOR RHONDA OR DAVEContact: RHONDA SCHEERPhone: 610-544-3399 OR 484-326-9494Email: [email protected]––––––––––––––––––––––––––––––––CRAWLER CRANENEED TO USED CRAWLER CRANE MAN-ITOWOC 18000 - 600 TON, YEAR2007, COLLAPSED IN SOME ACCIDENT.IF AVAILABLE, PLEASE SEND OFFERWITH PHOTO AND QUOTE.Contact: TRANG KIM MINHPhone: 84-8-38405292Fax: 84-8-38980845Email: [email protected]––––––––––––––––––––––––––––––––NEED TO BUY 3 BULLDOZER JD 2007AND MOORE ENC CAB WICHContact: JEAN MAURICE BOUTINPhone: 1 450 346 8975Email: [email protected]––––––––––––––––––––––––––––––––CAT D5 LGP/DEERE 650H LGP ETCFROM CONTRACTORContact: KEVIN SANSALONEPhone: 856-297-4758Fax: 856-362-5602Email: [email protected]––––––––––––––––––––––––––––––––CONETRACKW/ONBOARD 6X20 3 DECKSCREEN. DESCRIBE WHAT YOU WANT.Contact: RICHARDPhone: 603 828-6100Email: [email protected]––––––––––––––––––––––––––––––––
Attention Contractors!Post Your Wanted To Buy Listings FREE!
Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website
for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2010 • Page 59
More Than 1,800 Bidders Power Ritchie Bros. Chicago SaleThere were more then 1,800 registered bidders that par-
ticipated in person and online at the Ritchie Bros.multi-million dollar auction July 13 in Chicago, Ill.
The bidders came from 45 states, 30 countries, nineCanadian provinces and one territory.
More than 60 percent of the trucks and equipment (basedgross auction proceeds) went to buyers from outside thestate. Approximately 1,650 lots were sold on auction day.
Rich Evans (L) of Ritchie Bros. welcomes Vito DiMasoof A-Lamp Concrete Contractors to the platinum loungeat the Morris, Ill,. facility.
Checking out the cab of this JCB 407B compact wheelloader is Raydard Adams of Ultranic Services,Chicago, Ill.
Luke Willis liked what he saw in this Bomag BW124single drum roller.
Discussing the auction are Vince Blecha (L) of RitchieBros. and Doug Schultz of Herlihy Mid-ContinentCompany, Romeoville, Ill.
About to inspect this Cat D6N LGP dozer is Craig Aboltof Abolt Construction Inc., Fort Madison, Iowa.
This John Deere 450J dozer looked good to ScottRozier of Rosch Company.
In front of this Cat 140 grader is the father and sonteam of Lee Wiltjer Jr. and Sr. of Wiltjer ExcavatingInc., Lansing, Ill.
At the controls of this Cat D8R is Brett Hoerr of HoerrMachinery, Peoria, Ill.
Don (L) and Ron Wortmann of Wortmann BrothersExcavating, Rockdale, Ill., look over the skid steers atthe July 13 auction in Morris, Ill.
Page 60 • July 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
AGIRON 55 Consignment EventLLOOCCAATTIIOONN:: Red River Valley Fairgrounds, west edge of West Fargo, ND
Wednesday, July 28, 2010 • Sale Time 9:00 amAAUUCCTTIIOONNEEEERR’’SS NNOOTTEE:: This is a VERY LARGE AUCTION with four auction rings two of those live online rings. Registration, terms & details at
www.steffesauctioneers.com. The listing below is condensed and not all equipment is listed. Please look for details online! Equipment removal by July 30unless other arrangements are made. Contact auctioneers for owner information or changes at (701) 237-9173 or (800) 726-8609.
WWHHEEEELL LLOOAADDEERRSS1999 Komatsu WA380-3L, ROPS, GP bucket, 9,454 hrs. 1998 JD 644H, 180 hp, 4 yd. bucket, 23,254 hrs. Case W26, diesel, 3-1/2 yd., new radiator, water pump Fiat Allis 745, 4-1/2 yd. bucket, new brakes, wheel bearings, good tires Ford A62, bucket w/4-tine grapple, 17-5-25 Michelin rubber, fresh paintHough 870F, 3 yd. bucket, rebuilt 671 Detroit 1970 Trojan 114, IH engine, 6 cyl. gas, 9’ dirt/snow bucket Forklift mast for payloader, single stage
2004 Freightliner Columbia, cab & chassis, flattop sleeper,450 hp Mercedes, 10 spd., air ride, headache rack, 22.5son aluminum fronts, 502,000 miles, red 2004 Kenworth T800, 72” flattop sleeper, C15 Cat, 475 hp,jake brake, 10 spd. FRO16210C trans., VIT interior, 40,000lb. rears, 3:70 ratio, air ride, 220” WB, 11R22.5 tires, aluminum fronts 2004 Peterbilt 379, 66” full condo, C15 Cat, 475 hp, 9spd., air ride, ProHeat, leather, 22.5 on all aluminum,shows 656,090 miles2001 Kenworth T2000, 75” sleeper, C15 Cat, 475 hp, jakebrake, HRRT016710CAS autoshift, VIT interior, 40,000 lb.rears, air ride, 3:55 ratio, 230” WB, low pro 22.5 tires onaluminum 2000 IHC 9200I conventional, 51” low pro sleeper,Cummins ISM 370, engine brake, 10 spd., 40,000 lb. rears,air ride, power steering, A/C, aluminum fuel tank, singlechrome stack, exterior visor, cruise control, air dryer, deckplate, 205” WB, 11-22.5s on disc wheels2000 Kenworth T800 Aerocab conventional, 60” sleeper,Cummins ISM 425, engine brake, 10 spd., 3.73 ratio, airride, power steering, A/C, AM/FM cassette, aluminum fueltank, single chrome stack, exterior visor, cruise, air dryer,deck plate, 216” WB, 11-22.5s on disc wheels2000 Mack CH613 standup removable sleeper, 470 hp,Fuller 13 spd., air ride, air slide, diff lock, jake brake,cruise, scale, 24.5 tires on all aluminum, 95% rubber,1,000 miles on all new brakes & drums, 315,000 miles onengine & radiator (2) 2000 Peterbilt 379 Ultracab ext. hood conventional, 63”Unibilt stand-up sleeper, 12.7 liter Detroit, 430-470 hp,engine brake, RTLO-16913A trans., 40,000 lb. rears, fullscrew, 3:36 ratio, air ride w/dump valve, hyd. power steer-ing, A/C, chrome bumper, dual aluminum fuel tanks, dualchrome stacks, dual SS air cleaners, SS exterior visor, cabextenders, quarter fenders, air ride cab, AM/FM cassette,dual high back air ride seats, block heater, air dryer, aluminum deck plate, toolbox, air slide 5th, 255” WB, 24.5low pros on aluminum disc wheels1996 Peterbilt 379 ext. hood, 63” sleeper, 12.7 Detroit, 430hp, 13 spd., air ride, dual exhaust & air cleaners, on aluminum 1993 Peterbilt 379 ext. hood, 63” standup sleeper, 3406Cat, 425 hp, OH’d motor, 15 spd., air ride, 11-24-5 lowpros on aluminum 1992 Kenworth T800, removable bunk, 60 Series Detroit,10 spd., jake brake, diff, cruise, 230” WB, 22.5 rubber,rebuilt engine 1979 IHC 4300 Transtar, N14 Cummins, 13 spd., 24.5 onsteel
DDAAYY CCAABB SSEEMMII TTRRAACCTTOORRSS2006 Freightliner Columbia, 515 Detroit, Eaton 9 spd. convertible, 11-22-5 virgin rubber on all aluminum
2004 IHC 9200I, day cab, C12 Cat, 430 hp, auto shift,22.5s on aluminums(2) 2003 IHC 9400I, day cab, ISM Cummins, 10 spd.,engine brake, A/C, 188” WB 2003 Kenworth T300 single axle non-sleeper conventional,3126 Cat, 330 hp, engine brake, 6 spd., 23,000 lb. rears,spring susp., hyd. power steering, A/C, dual fuel tanks,horizontal exhaust, exterior visor, SS quarter fenders,deluxe interior, air dryer, aluminum deck plate & headacherack, toolboxes, pintle hook receiver hitch, air slide 5th,192” WB, 22.5 low pro tires, aluminum discs front & outside rear, shows 221,000 miles2002 Freightliner Columbia, day cab, 12.7L Detroit, 470 hp,13 spd., air ride, 22.5 low pros on aluminums 2002 Sterling AT9500, C12 Cat, 10 spd., Air Liner air ride,3.90 ratio, 12,000 lb. fronts, 40,000 lb. rears, 185,000miles plugged in & verified, previous salvage title 2001 Freightliner Columbia non-sleeper conventional,Cummins ISM 370, engine brake, 10 spd., 3:91 ratio, airride, power steering, A/C, AM/FM cassette, aluminum fueltank, single chrome stack, air dryer, PTO deck plate, airslide 5th, 195” WB, 11-22-5s, aluminum fronts, steel rears2001 IHC 9200I Eagle non-sleeper conventional, CumminsISM 370, engine brake, 10 spd., 3:91 ratio, air ride, powersteering, A/C, AM/FM cassette, aluminum fuel tank, singlechrome stack, exterior visor, tilt & telescoping steeringwheel, cruise, air dryer, air slide 5th, deck plate, 195” WB,11-22-5s, aluminum fronts, steel rears (3) 2001 Volvo VNMT64T, factory day cab, autoshift, airride, wet kit, 3:08 ratio, 22.5 rubber on steel Budds,360,000 miles 2001 Volvo VNM64T, ISM Cummins, 10 spd., A/C, tilt2000 IHC 9200 non-sleeper conventional, C12 Caterpillar,370 hp, 10 spd., 3.73 ratio, 40,000 lb. rears, air ride,power steering, chrome bumper, A/C, AM/FM cassette, aluminum fuel tank, single chrome stack, exterior visor,custom interior, tilt & telescoping steering wheel, cruise,engine brake, air dryer, deck plate, 180” WB, 11-22-5s, aluminum fronts, steel rears2000 Kenworth T800 Aerocab non-sleeper conventional,Cummins ISM 370, engine brake, 10 spd., 3.91 ratio, airride, power steering, A/C, AM/FM cassette, aluminum fueltank, single chrome stack, exterior visor, cruise control, airdryer, deck plate, 180” WB, 11-22-5s on disc wheels2000 Peterbilt day cab, C12 Cat, 10 spd., air ride, on aluminums 1999 Freightliner FLD112, C12 Cat, 9 spd., air ride, 12,000lb. front, 40,000 lb. rear, 22.5s on discs, aluminum front,shows 500,000 miles 1999 Freightliner 120, day cab, Cat power, 10 spd., jakebrake 1999 Kenworth T800, tandem axle, M11+ Cummins, 370hp, 10 spd. OD, air ride, 3.90 ratio, 165” WB, 22.5 tires,12,000 lb. fronts, 40,000 lb. rears, 650,000 miles
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2010 • Page 61
1999 Mack CH613, E7 Mack, 460 hp, 13 spd., air ride, tandem axle, 12,000 lb. front, 40,000 lb. rear, 700,000miles 1999 Mack CH613, factory day cab, E7 Mack, 350-380 hp,Eaton Fuller automatic, air ride, wet kit, twin aluminum fueltanks, 11-24-5s on aluminum, shows 348,685 miles 1999Peterbilt 385, day cab, rebuilt M11 Cummins, 10 spd., 4.33ratio, dual line wet kit, half SS fenders, 11R22.5 tires on allaluminum rims, 80% rubber 1999 Peterbilt 378, day cab, C12 Cat, 400 hp, engine brake,10 spd., air ride, 3.08 ratio, 244” WB, 40,000 lb. rear, 24.5son aluminum, 80,000 on in-frame OH, black 1998 Mack CH613, E7, 350 hp, 9 spd., wet kit, 3:86 rears,12,000 lb. fronts, 24.5 rubber, 433,246 miles(2) 1998 Volvo VLN64T, day cab, Volvo power, 10 spd.1997 Ford Aeromax, day cab, Detroit 60 Series, 470 hp, 10spd., excellent rubber 1997 Kenworth T600, day cab, Detroit power, 10 spd., airride, daylight doors, 560,000 actual miles 1997 Mack CH613, E7, 400 hp, 9 spd., wet kit, 24.5 rears,585,238 miles1997 Sterling, 60 Series Detroit, 475 hp, Super 10 spd., airride, wet kit, quick dump, sliding 5th wheel, 12,000 lb.fronts, 40,000 lb. rear, 4:10 ratio, A/C, tilt, cruise, powerwindows & locks, heavy grip tires on polished aluminumsaround, 475,000 miles 1997 Volvo, VED12, 10 spd., air ride, 132” WB, 12,000 lb.fronts, 20,000 lb. rear 1996 Freightliner tandem axle, 350 hp Detroit, 10 spd., airride, 12,000 lb. front, 40,000 lb. rear, 22.5 tires, 401,000miles 1996 IHC single axle, day cab, C12 Cat, 10 spd., air ride,blue1996 Volvo WG64T, factory day cab, M11 Cummins, 9 spd.,2:90 rears, air ride, twin aluminum fuel tanks, wet kit, quickdump, 11-22-5 on steel, shows 582,587 miles1995 Freightliner FLD120, E Series Cat, 500 hp, Super 10spd., 3:73 ratio, 22,5s on aluminum fronts, 300,000 mileson OH 1995 Freightliner FLD, day cab, 3406 Cat, 10 spd., air ride,power steering, air slide 5th, 11-22-5s on aluminum 1995 Peterbilt, day cab, American Class interior, 3406 Cat,10 spd., 24.5 low pros on aluminum, long wheelbase1995 Volvo WG64T, factory day cab, M11 Cummins, 9 spd.,3:90 rears, air ride, twin aluminum fuel tanks, wet kit, quickdump, 11-22-5s on steel, shows 594,320 miles1995 Volvo, day cab, 9 spd., 11-24-5 low pros on aluminum, 680,000 miles1994 IHC, day cab, 3176 Cat, wet kit, 22.5 low pros on aluminum steering wheels, 22.5 low pros on steel drivers,green1994 Volvo WG64, day cab, 11.1 Detroit, 9 spd., air ride,11-22-5 on steel 1993 IHC 8200, M11 Cummins, 10 spd., air ride, 165” WB,12,000 lb. front, 40,000 lb. rear, shows 500,000 miles Plus several ‘90s & earlier day cabs in excellent condition
FFLLAATTBBEEDD,, GGRRAAVVEELL,, DDUUMMPP,, BBOOOOMM && OOTTHHEERR TTRRUUCCKKSS2002 Freightliner FL106 single axle conventional straighttruck, 8.5 liter Detroit, 320 hp, FRO-11210B trans., 23,000lb. rears, 4:30 ratio, air ride, hyd. power steering, A/C,
horizontal exhaust, exterior visor, custom interior, air dryer,aluminum deck plate, 12’ steel flatbed body, 168” WB, 22.5low pros on disc wheels1998 Peterbilt 357 quad axle gravel truck, C12 Cat, 8LLtrans., aluminum box w/ext., 20,000 lb. front, 44,000 lb.rear, double lift single pushers, roll over tarp, factory double-framed heavy spec truck, custom paint 1997 IHC 4900 single axle, DT466 IHC, 5&2 spd., springsusp., 170” WB, 12,000 lb. front, 21,000 lb. rear, 14’ steelflatbed, 2 utility boxes, pintle hook set-up with electric trailer brakes, 6,000 lb. electric boom, Lincoln diesel welder 1998 GMC Topkick, 2 ton, 3116 Cat diesel, Allison automatic, 20’ flatbed 1997 IHC 4900 single axle, DT466 IHC, 5&2 spd., springsusp., 170” WB, 12,000 lb. front, 21,000 lb. rear, 14’ steelflatbed, 2 utility boxes, pintle hitch 1993 Ford F7000 single axle, Cummins diesel, automatic,11’ service bed, 400 gal. fuel tank w/pump, 245-70R19.5tires, DOT’d1992 Peterbilt 379 ext. hood tri-drive, 425C Cat, 18 spd.,3:55 rears, 20’ aluminum box, hoist, double-framed, 120gal. aluminum fuel tank, 6” chrome stacks, Ali Arc bumper,virgin tires on aluminum, 50% rear tread, new steers, 80%brakes & drums1991 Chevrolet Topkick drill truck, 28,000 miles 1991 IHC 2 ton, 6.8 liter diesel, 5 spd., 16’ landscaping box 1989 Ford LN7000 diesel with enclosed 24’ van body, sidedoor, lift gate 1981 Mack truck chassis, with Thomsen concrete pump 1974 Ford 2 ton truck w/flatbed & spraying equipment 1973 Ford Louisville tandem, V8, 5&3 spd., 20’ flatbed,plumbed for drill fill1972 Dodge 600 tag tandem water truck, 5 spd., 2,500 gal.water tank w/baffles
TTRRII--AAXXLLEE BBOOXXEEDD TTRRUUCCKKSS1996 Kenworth T600 twin screw with 3rd axle trailing,Detroit 60 Series, 10 spd., air ride, Loadline 22’x8’ box,center post hoist, roll tarp, rear controls, steel Budds, 724,700+/- miles 1995 Ford L9000 tri-axle, air up/down 3rd axle, M11Cummins, 10 spd., air ride, 21’ Loadline combo box, hoist,roll tarp, new build, rear controls, 11-22-5s on steel (2) 1995 Volvo WG64T twin screw tri-axle, M11 Cummins,330 hp, 9 spd., 3:90 rears, air up/down steerable 3rd axle,Cancade 22’ box, hoist, roll tarp, beet equipped, quickdump, combo gate, air ride, HD front springs, 11-22-5 onsteel1991 Freightliner cabover tri-axle twin screw, air up/downpusher, 350 Cummins, 9 spd., air ride, 22’ box, hoist, rolltarp, combo gate, 11-24-5 on Budds 1987 Freightliner twin screw with 3rd axle trailing, L10Cummins, 9 spd., spring ride, 22’ Reitan aluminum box,hoist, roll tarp, 535,990+/- miles, 21,500 lb. empty weight 1978 IHC tri-axle, 400 Cummins, 13 spd., 22’x8-1/2’Cancade box, hoist, roll tarp, 11-24-5 tires 1999 Freightliner FL112 tandem axle with rear lift tag, M11Cummins, 10 spd., air ride, 4.11 ratio, 12,000 lb. front,40,000 lb. rear, New 21’ box, combo gate, rear dump, tarp,beet equipped
((1144)) TTAANNDDEEMM BBOOXXEEDD TTRRUUCCKKSS2003 Freightliner Columbia, 60 Series Detroit, 470 hp,autoshift, 23’x102” box, roll tarp, beet ready, scrapers &safety pull, electric windows, new rubber on aluminumwheels, 628,000 miles, green/white 2003 Freightliner Columbia, 60 Series Detroit, 500 hp, 10spd., 22’x102” box, roll tarp, beet ready, scrapers & safetypull, electric windows, new rubber, steel back wheels, aluminum fronts, 613,000 miles, blue/white 2000 IHC 9200I twin screw, C12 Cat, 9 spd., New Loadline21’ box, hoist, roll tarp, rear controls, 22.5s on aluminums,white1995 IHC 8200 twin screw tandem, M11 Cummins, EatonFuller 9 spd., air ride, 21’ Loadline box, hoist, roll tarp,combo gate, twin aluminum fuel tanks, 385-65-22.5 steerson aluminum, 11-22-5s on aluminum rears, shows 972,709miles 1994 IHC 8200 twin screw tandem, L10 Cummins, 10 spd.,air ride, 21’ Loadline box, hoist, roll tarp, combo gate, single aluminum fuel tank, 385-65-22.5 steering on aluminum, 11-24-5s on aluminum rears 1980 IHC F1924 twin screw, V8 gas, 5&2 spd., Red Riverbox, hoist, roll tarp, plumbed for drill fill, 95,742 miles 1978 Chevrolet C65 twin screw, 427, automatic, 19’ Buffalobox, hoist, roll tarp, 3 pc. endgate, plumbed for drill fill 1978 IHC Loadstar 1700 tag tandem, 404, 5&2 spd., 19-1/2’ Omaha Std. box, hoist, roll tarp, single owner,37,000 miles 1975 Chevrolet C65 tandem, 427 gas, automatic, air brakes,20’ Buffalo box, hoist1975 Chevrolet 80 Series twin screw, 427, Allison automatic, 20’ Dakota box, hoist 1974 Chevrolet C65 tag tandem, 366, 5&2 spd., 18’ Frontierbox, hoist, roll tarp, 45,000 actual miles, single owner 1973 Ford LTS9000 twin screw, 250 Cummins, 9 spd., 20’Scott aluminum box, roll tarp, plumbed for drill fill, 290,370miles, OH at 241,330 miles 1973 IHC Loadstar 1700 hyd. lift tag, gas, Thomas Motors392, 5&2 spd., 21’ steel box, Harsh hoist Freightliner FLC112, L10 Cummins, 9 spd., 20’ Frontierbox, roll tarp, combination gate, plumbed for drill fill, beetequipped, 22.5 low pro tires
((77)) SSEERRVVIICCEE UUNNIITTSSTo include: 2003 Ford F250 Super Duty ext. cab, 8’Knapheide service body, shows 42,000 miles; 1999 DodgeRam 3500, reg. cab, Cummins diesel, 5 spd., 11’ Knapheideservice unit; 1996 Ford F250 XLT, diesel, 8’ service bed;1995 Chevrolet C3500, 1 ton dually, crew cab; 1995 FordF350 dually, 13-1/2’ utility box
((3344)) PPIICCKKUUPPSSFrom 2008 Ford F250; 1/2 tons, 3/4 tons, short & longboxes; extended cabs; some with very low miles
((1122)) HHOOPPPPEERR BBOOTTTTOOMMSS2009 Stoughton aluminum, 40’x96”, ag hoppers, air ride,22.5s on aluminum, fixed tandem axle, 2 hoppers 2005 Timpte Super Hopper, 40’x78”x96”, air ride, split tub,Sidewinder traps, SS front corners & rear panel, pintlehitch, 11R22.5 rubber on aluminum
2005 Timpte Super Hopper, 48’x78”x102”, air ride, splittub, SS front corners & rear panel, 2 rows of 5 LED lights,24.5 rubber on aluminum 2000 Timpte, 42’x96”x66”, ag hoppers, spring ride, rolltarp, 11R24.5 tires 1998 Timpte Super Hopper, 40’x66” sides, air ride, roll tarp,steel rims 1997 Timpte, 45’x78”, tarp, 2 spd. traps, spring ride, 24.5rubber on aluminum, low miles, single owner 1993 Timpte, 40’, roll tarp, spring ride, factory rear pintle &plumbing, steel wheels, 90% brakes & tires1991 Dakota steel, 42’x96”x66”, spring ride, roll tarp, 11-22-5 rubber 1986 Hawkeye steel, 38’, spring w/mini air ride 1985 American aluminum, 40’x90” sides, air ride 1979 Chamberlain, 42’x96”x66”, spring ride, roll tarp
((88)) EENNDD DDUUMMPPSS && BBEELLTTEEDD TTRRAAIILLEERR2001 Cancade end dump, 34’; plus Midland, Alumatech,East, Fruehauf, & Noonan; 1997 Trinity belt trailer, 42’2”x96”
TERMS: All items sold as is where is. Payment of cash or check must be made sale day before removal of items.Statements made auction day take precedence over alladvertising. $35 documentation fee applies to all titledvehicles. Titles will be mailed.
Page 62 • July 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
AUCTIONGenesee Bay Constructors Inc.
Wednesday, July 28, 2010 10 am EDT
Auction held at: 4335 North State Rd. Davison, MI 48423
No minimums or Reserves!!Genesee Bay is restructuring operations and selling thisexcellent maintained equipment and construction tools.
List includes (7) Kato Excavators, Komatsu dozer (D38),Komatsu WA250 Loader, CAT 416B backhoe, Case 1102vib roller, plus other construction equipment and hundreds
of tools and support equipment.
Visit www.1800lastbid.com for details, photos and descriptions.
Farm Machinery, Construction Equipment, Trucks, FleetVehicles Selling on Big Iron Timed Online Internet Auction
Why Sell on Bigiron.com?• No transportation cost • Seller Representation • Auction competition sets highest selling price •
Each item sells to the highest online bidder • Reasonable selling fees •Developed by auctioneers • NO BUYERS PREMIUM
Call a certified Big Iron Sales Representative1-800-WE SELL 8
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2010 • Page 63
137 Forklifts
116 Compactors
72 Loaders
88 Excavators
75 Backhoes
65 Skid-Steers
30 Graders
61 Dozers
291 Trucks – On-Road
Online AuctionThursday, August 5
Inspected and GuaranteedIAuction Company Bond #70259785. Preliminary list to date. Equipment subject to change.
www.ironplanet.com 888-433-5426Inspected and Guaranteed
Visit our website to see the complete list of equipment, review the guaranteed inspection reports, and place your bids.
Page 64 • July 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Sales Strong at Hiller Auction Service Summer Event
Hiller Auction Service held a summer contractor, land-scaper and sportsman auction June 26 at itsZimmerman, Minn., site. A wide selection of exca-
vators, dozers, payloaders, scrapers and trucks were up forbidding.
Larry (R) and Dustin Wangen of Wangen Excavating, Albert Lea, Minn., check outthis piece of Kubota equipment and hope to pick up something they can use for tor-nado clean-up and gravel hauling. Kevin Hiller of Hiller Auction ran the auction.
Longtime CEG subscriber Wayne Rambo of RamboSalvage, Wheeler, Wis., stands next to this John Deere325 skid steer while looking for excavators and pay-loaders.
Doug Jonak is in the market for dozers he could use ina “Dozer Demo Derby.”
Joe Del of Joe Del Leasing, Stacy, Minn., tries out thisCat 312B excavator.
Harry Lambert of AAA Lambert’s Landscape ProductsInc., pauses next to this Cat 627 scraper during theauction that saw him pick up a mower, truck andpower rake.
Keith Posch of Tri County Septic Service, Holdingford,Minn., tried out a dozer and mini-excavator he mightadd to the business.
Butch Barney of Barney’s Auto & Equipment Inc., SiouxFalls, S.D., hopes to buy anything he can make moneyon.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2010 • Page 65
Everything sells “AS IS,” “WHERE IS,” everything sells to the highest bidder without minimums or reserve. Visit us on the Internet at www.lyonauction.com
The Complete Auction And Appraisal Service
ALEX LY N & SONSALES MANAGERS & AUCTIONEERS, INC.
Bridgeport, NY 315/633-2944, Fax: 315/633-8010 • Syracuse, NY (Evenings) 315/637-8912 • www.lyonauction.com
SATURDAY, AUGUST 21 @ 9:30 AM(DELAWARE COUNTY FAIRGROUNDS)
DIRECTIONS: From the North/South: take I-71 to Rte. 36 &US 37 Exit, proceed West on Rtes. 36 & 37 for 9 miles toDelaware. Turn right on Rte. 23 North for 1.2 miles to the salesite. Entrance on left at the Travelodge. From the East/West:Take I-70 to I-270 bypass, proceed North on I-270 to I-71 toExit for Rtes. 36 & US 37 and proceed as noted above. NOTE:Auction Entrance is off of Rt. 23. Address: 935 U.S. 23 NorthDelaware, OH 43015.
NOTE: This sale will consist of a secured party auction of alocal trucking company of 20 late model truck tractors and 100van trailers and construction & support equipment.
SALE SITE PHONE: (740) 363-9389, 863-602-8365OHIO LICENSE #: 63199360809OHIO AUCTIONEER LICENSE #: 62199360989
SATURDAY, AUGUST 7 @ 9:30 AMRACINE (STURTEVANT), WISCONSIN
DIRECTIONS: From General Mitchell Int’l Airport inMilwaukee: (approx. 20 min.), take I-94S to Exit 333, Hwy 20.Proceed to East Frontage Rd., go South to auction site on left.From Chicago O’Hare Field: (approx. 45 min.), take I-294 N toI-94 N. Proceed to Exit 333, Hwy 20E, continue to East FrontageRoad. Address: 1755 S. E. Frontage Road, Sturtevant, WI 53177.
HILITES: 4 RUBBER TIRED LOADERS: 2003 Case 621D,2001 Case 621CXT, 2003 JD 444H, Cat 980B, 6 TRACTORLOADER BACKHOES: (6) 2005 Case 580 Super M (4x4), 6SKID STEERS: (3) 2008-2007 Case 450, Case 90XT, Case1845C, ASPHALT ROLLERS: Single Drum w/ 5.5hp engine, 2LOADER LANDSCAPE TRACTORS: (2) 2005 Case570MXT, UTILITY TRACTORS: 2003 Kubota L4630GST-F,BALE CHOPPERS: Vermeer Top Gun Round Bale StrawBlower, 5 DUMP TRUCKS: 2003 Ford F650XL, 2005 FordF450 (s/a), (3) 2005 Ford F350XL, TRUCK TRACTORS:2003 Int’l. 9400 (t/a), BOOM TRUCKS: 1992 IH (t/a), 2 PICK-UPS: 2005 Ford F250, 2000 Ford F250 Lariat (4x4), 2 CARHAULERS: (2) 2010 Road Boss 20ft., 7 TAGALONG TRAIL-ERS: (2) 2010 Heavy Duty 20ft. Equipment, (3) 2010 16FT.(t/a),2007 Aluma 9ft. (s/a), 9,000lb. (t/a), 8 CARGO TRAIL-ERS: 2008-(3) 2007-(3) 2005-2004 Wells Cargo 20ft., 2 UTILI-TY TRAILERS: (2) 2010 12FT. (s/a), ATTACHMENTS: SkidSteers: New Hay Spears, Grapples, New TRX 4000 48in. Forks,Tree Booms, Thumbs, Hay Spears, Buckets, Fork Frames, PalletForks, Snow & Mulch buckets, Stump Buckets, Backhoe, TreeBoom., Tree Shear, Large Variety of Buckets, Forks, HarleyRakes, Forks, SUPPORT EQUIPMENT: Truck & Trailer Tires,Bomag BP18/45-2, Torq 5,000 watt Generator, Bartell SP8Concrete Scarifier.
SITE PHONE: 262-886-2778, SITE FAX: 262-886-2369
REGISTERED WI AUCTION FIRM: #223-053 Alex Lyon &Son, Sales Managers & Auctioneers, Inc.
Page 66 • July 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
I am pleased to let you know that intalking with Angie Doleszal with our adagency, Get Noticed Advertising, she hasinformed me that ConstructionEquipment Guide has always stayed atthe top of the list as far as initiatinginquiries about Vaughan Auction GroupLLC. Angie feels that these results aredue to the concerted efforts of newsprint and internet marketing with acompany that maintains their list in atimely fashion.
“”
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2010 • Page 67
CCRRAAWWLLEERR TTRRAACCTTOORRSS:: 1987 CATERPILLAR D8N, SN 9TC00817,OROPS, CAT 3406 Dsl., Differential Steer, 8SU Dozerw/Tilt, DrawBar, 24” Pads ; 1986 CATERPILLAR D8L, SN 53Y03911, OROPS,CAT 3406 Dsl., 8SU Dozer w/Tilt, 24” Pads, (1555 Hrs. onComplete Undercarriage); 1996 CATERPILLAR D7R, SN 2EN00342,EROPS, AC, CAT 3306 Dsl., Differential Steer, 7SU Dozer w/Tilt,Draw Bar, 24” Pads (2821 Hrs. on Rebuild by OHIO CAT/SK); 1995CATERPILLAR D7H Series II, SN 5BF06019, OROPS, CAT 3306Dsl., Differential Steer, 7SU Dozer w/Tilt, Draw Bar, 24” Pads (797Hrs. on CAT Certified Power Train Rebuild); 1998 CATERPILLARD6MXL, SN 3WN01493, OROPS, CAT 3116 Dsl., Fingertip Controls,6P Dozer, Draw Bar, 24” Pads; 1993 CATERPILLAR D4H LGPSeries III, SN 9GJ00575, OROPS, CAT 3304 Dsl., 4P Dozer, 30”Pads (2400 Hrs. on Rebuild by OHIO CAT/SK)HHYYDDRRAAUULLIICC EEXXCCAAVVAATTOORRSS:: 2002 CATERPILLAR 322C, SNBKJ00553, AC, CAT 3126 Dsl., 12’6” Stick, CAT Quick Coupler, 32”Triple Grouser Pads; 2002 CATERPILLAR 322C, SN BKJ00543, AC,CAT 3126 Dsl., 12’ Stick, Quick Coupler, 32” Triple Grouser Pads;1998 JOHN DEERE 450LC, SN FF0450X090202, AC, 12’10” Stick,Auxiliary Hydraulics, 36” Triple Grouser Pads; 1989 JOHN DEERE892DLC, SN 892DLC5548, 13’9” Stick, Front Screen, 32” TripleGrouser Pads; 1998 JOHN DEERE 330LC, SN FF0330X080119,32” Triple Grouser Pads (2285 Hrs. on JD Remanufactured Engine& Pumps)HHAAUULL TTRRUUCCKKSS:: 2006 VOLVO A35D 6x6 Articulating Haul Truck, SNA35DV72246, AC, 26.5-R25 Tires; 2005 VOLVO A35D 6x6Articulating Haul Truck, SN A35DV71307, AC, 26.5-R25 Tires;2005 VOLVO A25D 6x6 Articulating Haul Truck, SN A35DV13739,AC, 23.5-R25 Tires; 2003 VOLVO A25D 6x6 Articulating Haul Truck,SNA25V11831, AC 23.5-R25 TiresMMOOTTOORR SSCCRRAAPPEERRSS:: 1991 JOHN DEERE 762B Elevating Scraper,SN 773785, OROPS; 1995 CATERPILLAR 627F Push-Pull Scraper,SN 1DL00207, EROPS, AC, 33.25-R29 Tires, (2221 Hrs. on Rebuildby OHIO CAT); 1995 CATERPILLAR 627F Push-Pull Scraper, SN1DL00206, EROPS, AC, 33.25-R29 Tires (2158 Hrs. on Rebuild byOHIO CAT)SSKKIIDDSSTTEEEERR:: 1999 JOHN DEERE 260, SN KV0260A160246, HighLift, Auxiliary HydraulicsWWHHEEEELL TTRRAACCTTOORR::1977JOHN DEERE 8630H 4x4, SN 004049R,EROPS, Triple Remote Hydraulics, PTO, 3 Pt. Hitch, Dual Wheels,18.4-38 Tires
CCOOMMPPAACCTTIIOONN:: 1993 CATERPILLAR 815B Compactor, SN17Z01505, OROPS, CAT 3306 Dsl., Hydraulic Leveling Blade w/Tilt(2035 Hrs. on Major OHIO CAT Rebuild, including Feet); 1999CATERPILLAR CS563C Vibratory Compactor, SN 4KN01477,OROPS, 84” Smooth Drum; 1994 CATERPILLAR CP563 VibratoryCompactor, SN 1YJ00448, OROPS, 84” Pad Foot Drum, HydraulicLeveling Blade, 23.1-26 Tires; 1996 CATERPILLAR CP323CVibratory Compactor, SN 6DM00115, OROPS, 48” Pad Foot Drum,Hydraulic Leveling Blade; 1998 HAMM 2320D Vibratory Roller, SN41174, OROPS, Deutz Dsl., 66” Smooth Drum, 14.9-24 TiresTTRREENNCCHHEERR//RROOCCKKSSAAWW:: 1987 VERMEER T-650, SN1VRE250S101000124, Detroit Dsl., 8’ Cutting Head, 24” TripleGrouser PadsLLUUBBEE && FFUUEELL TTRRUUCCKK,, WWAATTEERR TTRRUUCCKK:: 1990 IHC 4900 TandemLube & Fuel Truck, Dsl., Roadranger 13 Spd., 1200 Gal. Fuel Tank,Enclosed Van, (12) Hose Reels, (6) Product Tanks, PTO, StellarSRS-40 Hydraulic Compressor; 1999 MACK CH613 Tandem WaterTruck, Mack E7-460 Dsl., Fuller 9 Spd., 4000 Gal. Tank, Side &Rear Spray Bars, PTO PumpFFLLAATTBBEEDD TTRRUUCCKKSS:: 1997 GMC 3500 HD; Dsl., 5 Spd., Hose Reel,Tool Boxes, Pipe Rack, Fuel Tank 12’ Bed; 1995 GMC3500 HD, Dsl.,12’ Bed; 1993 CHEVROLET 3500 HD, Dsl., Koenig 12’ Bed,Liftmore Crane, 3,200lb Cap., Fuel Tank; 1993 CHEVROLET 3500HD, Dsl., 12’ Bed, Tool Boxes; 1990 FORD F350, 12’ Bed, ToolBoxes; 1988 FORD F450 Super Duty, 5 Spd., Tool Box; 1988 FORDSuper Duty, Reading 12’ Bed, Tool BoxesDDUUMMPP TTRRUUCCKKSS:: 1995 GMC Topkick , Dsl., 12’ Steel Bed; 1995GMC Topkick Flatbed Dump, Dsl., 6 Spd., 16’ LandscapeBed; 1990IHC 4700 Flatbed Dump, Dsl., 5x2, 16’ Landscape BedUUTTIILLIITTYY TTRRUUCCKKSS:: 2005 IHC 4200 Mechanics Truck, VT365 Dsl.,Allison 200P 5 Spd., Miller Bobcat 225G Gas Welder, Boss35, 175Rotary Compressor, Devers Custom Tool Box; 1994 GMC 3500 HDFlatbed, Dsl., Venturo FT2SKX Crane, Fuel Tank,Gas Compressor;1999 FORD F450 Super Duty, Powerstroke Dsl., 5 Spd., Devers 11’Bed; 1999 FORD F450 Super Duty Crew, Powerstroke Dsl., 5 Spd.,Devers 11’ Bed; 1992 FORD F Super Duty, 5 Spd., Knapheide 11’Bed, Champion Gas Compressor, 6006 Auto Crane, (2) Hose Reels,Vise, Outriggers; 1990 FORD F350, 5 Spd., Reading 11’ Bed; 1989FORD F350XL, Dsl., 5 Spd., Reading Bed, 5004 Auto Crane, MillerBig 40 Gas Welder, Gas Compressor; 1989 FORD F350, 5 Spd.,Reading 11’ Bed
PPIICCKKUUPP TTRRUUCCKKSS,, AAUUTTOO:: 2004 GMC Sierra 1500 4x4 ExtendedCab; 1999 GMC Sierra 1500SL Extended Cab, Tool Boxes; 1998GMC 1500 4x4 Extended Cab, Tool Boxes; 1998 GMC 1500,Extended Cab, Tool Boxes; 1995 CHEVROLET 1500, 5 Spd.,Extended Cab; 1993 CHEVROLET 1500, Tool Boxes; 1998 DODGERam 1500 Laramie SLT 4x4, V8, Quad Cab, Tool Boxes; 1997DODGE Ram 1500 4x4 V8, Club Cab, Tool Boxes; (2) 1997 DODGERam 1500, V8, Club Cab, Tool Boxes; 2005 PONTIAC Vibe, 4 Dr.TTRRAAIILLEERR:: 1985 TRAIL KING TK18-2400 Tandem Tag Trailer, 18’Deck, Dovetail, Ramps, Dual WheelsLLAASSEERR EEQQUUIIPPMMEENNTT:: AGL Model S322 Pipe Laser; AGL-SL-352Pipe Laser; AGL Auto Line Pipe Laser; AGL-SL-5 Pipe Laser:SPECTRA PHYSICS 1145 Dual Plane Rotator w/15” Tripod/15’Linker Rod; (2) Laser Plane Receivers & Laser Plane Mast forGrader Control; AGL Sewer Blowers: Pipe Laser Targets: AluminumRod Sets for AGL Pipe Laser; Spectra Precision DialagradeAANNTTIIQQUUEE IINNSSTTRRUUMMEENNTTSS:: 6100 Series Dietzgen Transit; T3 BergerTransit; Gurley Transit; Keuffel & Esser Co. Level Model112161; (Allof previous are in original wood boxes); Wodack Electric HandSaw; Portable Electric Tools Fred W. Wappat Model A-9: Saw;Sears/Roebuck Welder/GeneratorMMIISSCCEELLLLAANNEEOOUUSS IITTEEMMSS:: Gorman Rupp 4” Pump; Allis ChalmerDisc; Vermeer 1250 Chipper; Georgia Buggies; LightPlant; 1,00016Man Basket; Older Tar Kettle; Walk Behind Ramax; Old PullWagon for Small Rollers; Wackers Plate w/6.5 Briggs; Multi-QuipPlate 5.5 Honda; 2” Stone Pump w/5.5 Honda; 2” Gorman RuppPump w/6.5 Briggs; Stihl Ts460; Walk Behind 48” SweepsterBroom w/5 hp, IC Briggs; IR Elec. Impact, 1/2” Drive; Ramset;Single Shot Hilti Gun; Stihl Saw Carts; Mighty Mite Pipe Pullerw/Assortment of different Length Arms; Airplazo Sand Blaster; 3”Gorman Rupp 1 Phase 230 Volt 61 TP Pump; 3” Flygt Single &Phase 220 61 TP Pump; Makita 14” Cut Off Saw; Tru Co CoreMachine; B/D Core Machine in Cage w/3”-6”-8”-10” Core Cans;Assortment of Core Cans; Assortment of Job Boxes; Fostoria SunMite Infrared Heaters - Brand New; CP 6016 Air Rock Hammers;Seal Lox #2 Roof Crimper; Rockwell Compound Saw on Stand; BWTrowel Machine w/Extra Blades; Long Year Walk Behind DiamondSaw w/Concrete & Asphalt Blade (65 HP Wisconsin);Wilco PipePusher; Vermeer Tile Box; Merritt Aluminum Headache Rackw/Light Bar; Air Compressor w/Rohler Engine
NOTICE: The Smith Family, owners of SK Construction Co., have decided to streamline their operations to suit the new economy. They are selling all equipment that is surplusto their current needs. SK Construction Co. will continue to provide all of their customers the same top-notched service and Quality that they have come to expect since 1955.All Equipment except JD 8630 was purchased new by SK Construction. Maintenance records available.
ABSOLUTE ONE OWNER AUCTIONTHURSDAY, AUGUST 12TH, 2010 AT 9:00 A.M. E.D.T.
LOCATION: 1350 Hook Drive, Middletown, OH 45042
CCOONNDDIITTIIOONNSS AANNDD TTEERRMMSS:: The condition and description of each item set forth is OONNLLYY AA GGUUIIDDEE, and is in no way a warranty or guarantee,actual or implied. All of the equipment in this Auction is being sold AASS--IISS,, WWHHEERREE--IISS aanndd wwiitthh aallll ffaauullttss. All conditions and descriptions ofequipment in this sale bill are believed to be correct and have been conscientiously set forth by the owners. The equipment is available forpublic inspection prior to the Auction. CCOOMMPPLLEETTEE PPAAYYMMEENNTT DDAAYY OOFF SSAALLEE:: Certified or Cashiers Check Accepted. If payment is to be madeby personal or company check or by wire transfer, you must have a letter from your Bank made to Bunch Brothers Auctioneers. Immediatepossession of all equipment on proper settlement. All equipment must be removed from lot by Monday, August 23rd, 2010 at 5:00 P.M.
IINNSSPPEECCTTIIOONN:: The equipment may be inspected at Auction Site beginning Friday, August 6th from 8 to 5.
PPRREE--RREEGGIISSTTEERR:: Wednesday, August 11th.
ACCOMMODATIONS TTRRAANNSSPPOORRTTAATTIIOONNGreater Cincinnati International
Airport is Serviced by mostmajor airlines. MiddletownRegional Airport/Hookfield
Municipal Airfield for PrivatePlanes (513) 217-4777
FFOORR MMOORREE IINNFFOORRMMAATTIIOONN CCOONNTTAACCTT::Scott Tinch (513) 465-6001 • Dan Smith (513) 424-1613 • Jimmy Smith (513) 465-6016
Page 68 • July 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ALEX LYON & SON AUCTIONEERSwww.lyonauction.comPhone: 315-633-2944 • Rutland, VTSat., July 31, 2010For: Logging and SawmillOperation – Full Line ofSkidders, De-limbers, Trucks,Trailers, Support Equipment• Queretaro, MexicoFri., August 6, 2010For: Late Model ConstructionEquipment, Large Quantity ofForklifts, Support Equipment,Trucks & Trailers• Racine, WISat., August 7, 2010For: Construction, Landscapeand Support Equipment, Trucks& Trailers• Rochester, NYSun., August 8, 2010For: Large Quantity of New &Used Support, ConstructionEquipment, New Wood, Lumber& More• Buffalo, NYSat., August 14, 2010For: Estate Auction: Cranes,Draglines, Buckets, LargeQuantity of Support Equipment• Orlando, FLThurs., August 19, 2010For: Late Model Rental Returnsof Forklifts, Aerial Lifts,Construction, SupportEquipment, Trucks & Trailers• Lexington, KYFri., August 20, 2010For: Complete Liquidation ofEquipment Hauling Company • Columbus, OHSat., August 21, 2010For: Secured Party Sale, TruckTractors, Van Trailers, Asst. ofConstruction Equipment• Houston, TXWed., August 25, 2010For: Rental Return Auction ofForklifts, Aerial, Construction,Support, Trucks & Trailers• Monticello, NYSat., August 28, 2010For: Complete Liquidation ofEarthmoving Equipment,Support, Trailers & Trucks• Keene, NHSat., September 10, 2010For: Construction, Ag, SupportEquipment, Parts, Tools,Attachments• Fort Wayne, INWed.-Thurs, September 15-16,2010For: Construction, Aerial Lift,Forklift, Support Equipment,Trailers, Truck Tractors, Pickups• Richmond, VAFri., September 17, 2010For: Complete Liquidation ofLate Model Cat EarthmovingEquipment, Trucks , Trailers,Shop Equipment• Syracuse, NYWed., September 22, 2010For: Complete Liquidation ofUndercarriage Repair Shop• Atlantic City, NJSat. - Sun., September 25-26,2010For: Very Large Construction,Forklift, Aerial Truck & TrailerRental Returns, New BuildingSupplies• Saginaw, MIFri., October 8, 2010For: Large Construction,Agricultural, Support, AerialLifts, Trucks & Trailers• Westminster, VTSun., October 10, 2010For: Probably The Finest Toy
Train Collection East of theMississippi• Orlando, FLTues., October, 12, 2010For: Construction and SupportEquipment, Aerial Lifts,Forklifts, Trucks & Trailers• Bangor, MEFri., October 15, 2010For: Aerial Lifts, Construction,Logging Equipment, Trucks,Trailers, Support• Middletown (Florida), NYDATE TBAFor: Rental Fleet ConstructionEquipment, Support, AerialLifts, Trucks & Trailers• Detroit, MIDATE TBAFor: Complete Liquidation ofConstruction and SupportEquipment• Chicago, ILDATE TBAFor: Construction, SupportEquipment, Aerial Lifts,Pickups, Trucks, Trailers• Louisville, KYDATE TBAFor: Truck Tractors, EquipmentTrailers, Support, ConstructionEquipment & Light Vehicles
COLLAR CITY AUCTIONSwww.collarcityauctions.comPhone: 518-895-8150• Delanson, NYThurs., July 29, 2010For: Construction Equipment,Trucks & Trailers
DAVIS AUCTIONSwww.davisauctionsinc.comPhone: 203-758-4087• Prospect, CTThurs., August 12, 2010For: Quinnipiac CommissionAuction – ConstructionEquipment
INSIGHT AUCTIONEERSwww.insightauction.comPhone: 863-386-1225• Sebring, FLSaturday, September 18, 2010
IRAY AUCTIONSwww.iraymn.comPhone: 320-968-7230• Foley, MNFri., September 17, 2010• Portage, WIFri., October 15, 2010• Foley, MNFri., December 3, 2010
IRON PLANET AUCTIONSwww.ironplanet.comPhone: 888-433-5426ONLINE AUCTIONSGo to www.ironplanet.com toview the complete auctionschedules, inspection reportsand to place your bid!• Thurs., July 29, 2010For: Construction Equipment• Thurs., August 5, 2010For: Construction Equipment• Thurs., August 12, 2010For: Construction Equipment
MANHEIM HEAVY TRUCK AUCTIONSwww.manheimheavytruckauc-tions.comPhone: 877-704-4636• Lakeland, FLFri., July 30, 2010
MANHEIM MINNEAPOLISwww.manheim-minneapolis.comPhone: 800-622-7653• Maple Grove, MNFri., August 13, 2010 For: Heavy Truck & EquipmentAuction
MIEDEMA AUCTIONEERING & APPRAISALwww.repocast.comPhone: 1-866-550-REPO• Davison, MIWed., July 28, 2010 For: Genesee Bay ConstructorsInc. Excellent MaintainedEquipment and ConstructionTools
CALL: (877) OR (320) 968-7230See It • Bid on It • Buy It • www.iraymn.com
FRIDAY, AUGUST 20TH • 8AMLime Springs, IA • Jct Hwy 9 & 63
Ryan Auction Sales LLC, a New England-based virtualauction company, hosted its first auction on April 5, 2010,from its headquarters in Concord, N.H.
With extensive experience in the auction industry, RyanAuction Sales CEO E. Douglas Ryan saw an opportunity tobreak away from traditional auctions through the use ofmodern technology.
Ryan Auction Sales was founded on the principle that anexperienced group of professionals paired with the imple-mentation of new technology can provide customers withthe timely and cost effective service that a traditional auctioncannot.
Virtual auctions provide a reliable alternative to beingphysically present at an auction, according to Ryan. Detailedinformation, including appraisals, is provided online, ensur-ing that bidders make educated buys.
In partnership with Equipmentfacts LLC, Ryan AuctionSales’ live streaming auctions include HD video and audio,allowing the user to see, hear, and experience all aspects ofauction as it progresses.
Ryan Auction Sales holds a virtual auction every lastTuesday of the month. Auctions are accessible through theRyan Auction Sales and Equipmentfacts homepages.
For more information, visit ryanauctionsales.com.
N.H.’s Ryan AuctionSales Holds Its FirstVirtual Sale on Web
Page 70 • July 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ALEX LYON & SON INCRACINE WI / COLUMBUS OH...............................................65
ALEX PARIS CONTRACTING CO INC ..........................................9ALLU GROUP ...............................................................................19AMERICAN STATE EQUIPMENT .................................................11ARTIC SNOW & ICE CONTROL ..................................................17BARGAINS...............................................................................56,57BODINE MFG................................................................................20BRANDEIS ....................................................................................18BUNCH BROS AUCTION CO
CEG MORE VALUE FOR YOUR ADVERTISING DOLLAR...26WANTED.................................................................................58BACKHOES & ATTACHMENTS PROMO...............................35PRODUCES RESULTS ..........................................................66
CONSTRUCTION MACHINERY CORP .......................................14DAKOTA AG INNOVATIONS.........................................................69DOOSAN INFRACORE AMERICA CORP ....................................39DOOSAN PORTABLE POWER ....................................................45DURATECH...................................................................................34DYNAPAC .....................................................................................46EAGER BEAVER TRAILERS........................................................13ELLIOTT MACHINE WORKS INC ................................................52EQUIPMENT MART OF NEW YORK ...........................................20FABCO EQUIPMENT INC...............................................................7FARM-RITE EQUIPMENT INC .....................................................37FELLING TRAILERS.....................................................................51FINKBINER EQUIPMENT CO.......................................................11GARY CARLSON EQUIPMENT ...................................................10HOWELL TRACTOR & EQUIPMENT CO................................57,72ILLINOIS TRUCK & EQUIPMENT ..................................................3INDECO NORTH AMERICA .........................................................29IRAY AUCTION
IRON PLANET ........................................................................63JJ SCHECKEL CORP ...................................................................17JOHN DEERE ...............................................................................42
KAWASAKI CONSTRUCTION MACHINERY ...............................48KOMATSU AMERICA CORP ...................................................40,41KUBOTA........................................................................................41LIEBHERR.....................................................................................30LUBY EQUIPMENT SERVICES....................................................17MANHEIM MINNEAPOLIS
MAPLE GROVE, MN ..............................................................69MCCANN INDUSTRIES INC...........................................................6MID COUNTRY MACHINERY.......................................................36MIEDEMA AUCTIONEERING INC
GENESEE BAY CONSTRUCTORS .......................................62MUSTANG MFG............................................................................43NPK CONSTRUCTION EQUIPMENT INC ...................................47NUSS GROUP ..............................................................................23PATTEN TRACTOR & EQUIPMENT CO ........................................2POWERSCREEN MW DEALER...................................................33PURPLE WAVE INC
OHIO STATE SUPPLEMENTBOBCAT ENTERPRISES................................................................3DOPPSTRADT US..........................................................................8GIBSON MACHINERY LLC ............................................................5RUDD EQUIPMENT CO .................................................................1THE MCLEAN CO...........................................................................7
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2010 • Page 71
CALL FOR A FREE BROCHURE
800.211.3983For information on upcoming auctions, visit our
web site at rbauction.com
CHILLIWACK, BC, CAN 604.823.2700 JUL 21DUBAI, UNITED ARAB EMIRATES +971.4 81.20600 JUL 26 - 28OLYMPIA, WA, USA 360.956.1500 JUL 29ALBUQUERQUE, NM, USA 505.836.0738 AUG 4SASKATOON, SK, CAN 306.933.9333 AUG 4TORREON, MEXICO +52.871.731.7424 AUG 5LAS VEGAS, NV, USA 702.644.2468 AUG 6DENVER, CO, USA 970.535.6700 AUG 10SALT LAKE CITY, UT, USA 801.250.1836 AUG 17ORLANDO, FL, USA 863.420.9919 AUG 18NORTH EAST, MD, USA 410.287.4330 * AUG 24DETROIT, MI, USA 937.568.9500 AUG 25TIPTON, CA, USA 559.752.3343 AUG 25HOUSTON, TX, USA 713.455.5200 AUG 26 & 27BOISE, ID, USA 208.344.0350 AUG 27PHOENIX, AZ, USA 602.269.5631 SEPT 2EDMONTON, AB, CAN 780.955.2486 SEPT 8 & 9POLOTITLAN, MEXICO +52.427.266.0909 SEPT 8
BRISBANE, AUSTRALIA +61.73382.4444 SEPT 14TRURO, NS, CAN 902.895.3700 SEPT 14LOS ANGELES, CA, USA 951.940.9441 SEPT 15LONDON, ON, CAN 519.425.4321 SEPT 15KANSAS CITY, MO, USA 816.633.4096 SEPT 15COLUMBUS, OH, USA 937.568.9500 SEPT 16GEELONG, AUSTRALIA +61.3.5245.3333 SEPT 16OCANA, SPAIN +34.925.157.580 SEPT 16 & 17PANAMA CITY, PANAMA +507.266.2511 SEPT 17HYDERABAD, INDIA +91.96.76123412 SEPT 21ATLANTA, GA, USA 770.304.3355 SEPT 22MOERDIJK, THE NETHERLANDS +31.168.392.200 SEPT 22 - 24EL PASO, TX, USA +971.4.8120600 SEPT 24DUBAI, UNITED ARAB EMIRATES +971.4 81.20600 SEPT 27 - 29MONTREAL, QC, CAN 450.464.2888 SEPT 27 & 28MINNEAPOLIS, MN, USA 507.774.5050 SEPT 28ORLANDO, FL, USA 863.420.9919 OCT 27 & 28MONCOFA, SPAIN +34.964.580.559 OCT 28
Can't make it to the auction? Place your bids over the Internet at rbauction.com. Submit proxy bids in advance of any auction, or place real-time bids through our live auction broadcasts. Click rbauctionBid on the Ritchie Bros. web site for details.
*NOTE NEW DATE - Dates are subject to change
Auction UpdateEVERYTHING SELLS TO THE HIGHEST BIDDER
Upcoming UnreservedPublic Auctions36
»The NEW rbauction.com – now with more equipment information to help you bid smarter.
Page 72 • July 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE