This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
W W W . S U Z O . C O M 113
Gaming CatalogueMicroswitches
Saia Microswitch
Part no. Description22-0760-8 Saia Microswitch22-0761-1 17.5mm Lever arm22-0761-2 25mm Lever arm22-0761-5 40mm Lever arm
• Can be used with different levers. • Saia ref. XCF8. • Pcb mounting pins. • 30gr operating.
IGT Mini Switch
Part no. DescriptionH70-1752-00 IGT Mini switch
• Used in IGT machines. IGT. Ref 51015890/W.
Micro Microswitch
Part no. DescriptionB7C005-01-ZZZZ Micro Microswitch
• Used in many mechanical coin acceptors. • Otehall ref. light operating force - BB1RS1 or medium - BB1BS1. • Available in light ( up to € 0.20 ) or medium ( € 0.50 and up ) operating force. • 6.3mm ( 0.250”) terminals.
Double Pole Toggle Switch
Part no. DescriptionH49-0031-00 Toggle switch double pole
• Double pole double throw switch. • 10A 250Vac. • 6.3mm ( 0.250”) terminals. • UL / CSA approved.
Part no. Description Watt Box contentH223-1013-0 F12T4/CW Fluorescent lamp for Atronic 12 10
F12T4/CW Fluorescent Lamp for Atronic• F12T4/CW used on Atronic “Deal or No Deal”.
Used in various applications, like air hockey, money detectors etc.
Blacklight Blue Fluorescent Lamps
Fluorescent Lamps• 70% of all artificial light in the world is generated by fluorescent lamps.• A fluorescent lamp consumes only about one fifth of the electricity used by an ordinary light bulb. • OSRAM, PHILIPS and SYLVANIA are the three largest manufacturers of lighting components in the world. • Colour cool white. • Average life time of the fluorescent tubes is 12000 hours.
Fluorescent tubes are only sold per box.
These T2 fluorescent tubes are the latest technology in energy efficient cabinet lighting. We have listed here several types of T2 fluorescent lamps. If you don’t find your requested type, please contact our sales department.
• Ultra slim design only 7mm diameter.• Average rated life 10.000 hours.• Diameter 7mm/ 0.276 inch.• Used with special electronic ballasts and fixtures.• Made by Osram.• Available in Cool white (CW) and Warm white (WW). • Used in Aristocrat machines.
• Replace 150W incandescent lamp. • Butterfly model makes a perfect choice for slim illumination. • 4 pin plug-in lamp socket.
Plug-in Compact Fluorescent Lamp
Part no. DescriptionF16D2CW 16W
Look at our LED
replacement!
Lighting
W W W . S U Z O . C O M 117
Gaming CatalogueLighting
Part no. DescriptionH91-0771-00 Fluorescent for Bally Monte Carlo
Fluorescent for Bally Monte Carlo• 24W compact fluorescent. • Used behind belly glass on Bally Monte Carlo.
Fluorescent Lamp for Bally M9000 Topper Box• 36W compact fluorescent lamp for Bally M9000 Topper.
Part no. DescriptionH91-0986-00 36W Compact Fluorescent lamp
• Osram Dulux S/E, high quality energy saving lamps. • Gives an equal amount of light as traditional fluorescent lamps. • Standard white colour or cool white. • Model used in Suzo-Happ toppers. • 11 Watt. • 2G7 Socket.
Compact Fluorescent Lamp
Part no. Watt Colour Kelvin-9902-9 9 Standard White 2700-9902-9CW 9 Cool White 4000-9902-11 11 Standard White 2700-9902-11CW 11 Cool White 4000
• Osram Dulux S, high quality energy saving lamps. • Gives an equal amount of light as traditional fluorescent lamps. • Available in standard or cool white colour. • G23 Socket.
Compact Fluorescent Lamp
Part no. Watt Colour Kelvin-9901-5 5 Standard White 2700-9901-7 7 Standard White 2700-9901-7CW 7 Cool White 4000-9901-9 9 Standard White 2700-9901-9CW 9 Cool White 4000-9901-11 11 Standard White 2700-9901-11CW 11 Cool White 4000
For use with 5, 7, 9 or 11 Watt Compact fluorescent lamps.• EEI classification: C. • Voltage [V]: 230. • Size: 18 x 41 x 155mm. • Fixing centre [mm]: 140. • Protection from overheating: Without thermal cut-out. • Encapsulated: No. • With mounted lamp holder: G23 • Connection: Push-in with lamp holder. • Earth terminal: Yes. • Frequency [Hz]: 50.
Electromagnetic Ballast 230V/50Hz for Compact Fluorescent LampsSuper thin version. With mounted lamp holder.
Part no. Description22-0112 Ballast for Compact fluorescent lamps with lamp holder
• Full kit for 12V illumination. • Kit contains 12V ballast, lampholder for 4 pin compact fluorescent (2G7) base), connected with harness. • By using this kit you can avoid 220Vac wiring in your machine. • Plastic cover available. • UL & CE Approved.
12V Illumination Set
Part no. Description22-0138-2 12V illumination set22-0134 Ballast cover
• For lamp size 8 Watt. • Includes starter and terry clips.
Lighting Tray 240Vac-8W
Part no. Description22-0127 8W lighting tray
• For lamp size 15 Watt. • Includes starter and terry clips.
Lighting Tray 240Vac-15W
Part no. Description22-0126 15W lighting tray
• For 2x F8T5 fluorescent tubes.• Set includes ballast 2x 8W, starter, and 4 fluorescent tube sockets.
Lamp support for lamps with 16mm diameter. • Lamp base: G5. • Material: Zinc-coated polished steel. • Fixing: Fixing holes for screws M3.5 • Lamp axis: 10.3mm.
Terry Clip ø16mm T5
Part no. Description22-0111-1 Terry clip ø16mm T5
Terminal BlocksNominal rating: 4/380. Temperature marking: T85. Secundary connection: 2 Push-in twin terminals: 1.5mm2 per pol (L/N).• Style: Terminal block. • Pole number: 3. • Earth bracket: yes. • Fuse holder: No. • Surpressed capacitor: No.• Fixing: For push-fit. • Connection: Screw terminals: 2.5mm2.
Part no. Description22-0118 Terminal block
W W W . S U Z O . C O M 119
Gaming CatalogueLighting
Thin-Lite Ballast for IGT• Used with IGT I-Game for the top box round circuline bulb.
Part no. DescriptionH91-0991-00 Thin-Lite Ballast for IGT
This Ballast is specially designed to work with T2 lamps.• Quick start <2 seconds. • Switches off automatically with a defective lamp. • 198-254Volt/50Hz. • One lamp per ballast. • Size: 150 x 22 x 22mm. (LxWxH)
• Lamp type: T5. • Voltage [V]: 230. • Size: 26 x 28 x 130mm. • Fixing centre: 120. • Protection from overheating: Without thermal cut-out. • Encapsulated: No. • Connection: Push-in terminal. • Earth terminal: yes. • Frequency [Hz]: 50. • Protection class: Class of protection I. • EN 60920 (Safety). • EN 60921 (Working method)
Electromagnetic Ballast 230V/50Hzfor T5- 4, 6, 8 or 2x4 Watt Tubes Super-slim version. Vacuum-impregnated with polyester resin.
Part no. Description22-0105 Electromagnetic ballast
• 1x 36W / 2 x 18W.• Can be used with 32W Circline lamp.
Ballast 240Vac
Part no. Description22-0109 Ballast
For use with 8, 10, 13 or 2x8 Watt Compact fluorescent lamps.• EEI classification: B1.• Voltage [V]: 230.• Size: 28 x 41 x 85mm.• Stack lenght [mm]: 034.• Fixing centre [mm]: 075.• Protection from overheating: Without thermal cut-out. • Encapsulated: No.• Connection: Push-in/IDC terminal.• Earth terminal: No.
Electromagnetic Ballast 230V/50HzStandard version
Part no. Description
22-0117 Ballast for Compact fluorescent lamp andfluorescent tubes
• High quality ballast for longer lifetime, guaranteed to deliver proper voltage.
• Ballast 25Vdc. • For 22-40W Circline lamps, or 17W fluorescent tube.
Part no. DescriptionH70-1151-00-R Ballast
Ballast
6W Ballast for Aristocrat• 6w ballast for Aristocrat machines. • Setec EBS3-6-T5 (replaces EBS2-6-T5). • Ref. No. 008056 replaces 006999.
Part no. DescriptionH70-1757-00 6W Ballast for Aristocrat
Part no. Description22-0138-100 Ballast 12Vdc22-0134 Ballast cover
• Input voltage 12Vdc ( Min. 10 - Max 16V). • Output 1x11W or 2x11W. • Output voltage max 101V. • Case size 127x30x22mm. • Easy connection by 6.3mm terminals. • UL and CE approved. • Cover available. • Also used in all Suzo-Happ topboxes.
Part no. Volt Amp Lif e Packing-73 14 0.08 15000 100-84 6.3 0.04 20000 100-85 28 0.04 10000 100-86 6.3 0.20 20000 100
Part no. Volt Amp Lif e Packing-63 7 0.63 1000 10-89 13 0.58 750 10-8170 28 0.17 2000 10-9051 28 0.90 1000 10
Part no. Volt Amp Lif e Packing-906 13 0.69 1000 100-912 12.8 1.00 1000 100
Part no. Volt Amp Lif e Packing-2182D 14 0.08 15000 10
Part no. Description Packing-455 6.5V - 0.5A 10
Part no. Description Packing-7965 60V - 10W 1
Part no. Description PackingH91-1018-00 Xenon 591 bulb 1
Coloured Wedge Base Lamps T1-1/2 5mm
Coloured Wedge Base Lamps T3-1/4 10mm
Xenon 591 Bulb• Used in WMS Bluebird tower light. • Wedge base. T3-1/4 -10mm• 14V.
Part no. Description Packing-286-2 5mm 12V 0.10 Amp red 100-286-4 5mm 12V 0.10 Amp yellow 100-286-5 5mm 12V 0.10 Amp green 100-286-6 5mm 12V 0.10 Amp blue 100
Part no. Description Packing-1112-2 10mm 12V 0.10 Amp red 100-1112-6 10mm 12V 0.10 Amp blue 100
S U Z O I N T E R N A T I O N A L122
Gaming Catalogue
Coloured Lamp Caps• Fit on all T3-1/4 10mm lamps. • Sold per 10 pcs.
Part no. Description-10013-2 Red cap-10013-3 Orange cap-10013-4 Yellow cap-10013-5 Green cap-10013-6 Blue cap
Coloured Lamp Caps• Fit on all T1-1/2 5mm lamps. • Sold per 10 pcs.
Part no. Description-10012-2 Red cap-10012-3 Orange cap-10012-4 Yellow cap-10012-5 Green cap-10012-6 Blue cap
• AMP Lamp Holder fitted with lamp 286 12V 1.2W. • Used in various machines, like Barcrest etc.
Lamp with Holder
Part no. Description-286LH3 Lamp with holder
• Easy to use. • Comfortable T-shape.
Connection Hand Tool for 286LH3 Lamp
Part no. Description1-525421-3 Hand tool for -286LH3
Part no. Description-7111311 Lamp holder with lamp -2305
Lamp Holder T1-1/2 5mm with Lamp -2305
Part no. Description-6797323 Lamp holder with lamp -286
Lamp Holder T1-1/2 5mm with Lamp -286
Part no. Description-7121306 Lamp holder with lamp -512
Lamp Holder T3-1/4 10mm with Lamp -512
• For T3-1/4 10mm wedge base lamps. • Mounting depth 9.6mm. • ø17.8mm.
Lamp Holder Twistlock
Part no. Description22-2166 T10 Lamp socket
• For T1-1/2 5mm wedge base lamps. • For 1.5mm - 1 or 2 faces PCB.
Lamp Holder Twistlock Double Contact
Part no. Description22-2172 T5 Lamp socket
• For T3-1/4 10mm wedge base lamps. • PCB mounting.
Lamp Holder with Terminals
Part no. Description22-2165 T10 Lamp socket
• For T1-1/2 5mm wedge base lamps. • For 1.5mm - 1 face PCB.
Lamp Holder Twistlock
Part no. Description22-2171 T5 Lamp socket
• For T3-1/4 10mm wedge base lamps. • No lamp included.
Lamp Socket
Part no. Description11-0090 Lamp socket
Mini-Lamp for Casino Signs• Used in progressive signs above slot machines. • 2-wire base, T 1.5 (Tivoli style). • 28 volts, .04 amps.
Part no. DescriptionH91-0185-00 28V Clear bulb with baseH91-0140-00 28V Clear bulb onlyH91-0185-0B 28V Blue bulb with baseH91-0185-0R 28V Red bulb with base
Lighting
W W W . S U Z O . C O M 123
Gaming CatalogueLampholders & Adaptors
Starpoint 10mm Wedge Base Lampholder
Starpoint Diode and Link Adaptors
Starpoint Universal 5/10mm Wedge Base Lampholder
The Starpoint 10mm wedge base IDC lampholder is a plastic injection moulded unit designed for quick and easy installation and removal in panel up to 2mm thickness. It takes standard 10mm wedge base lamps or leds and can be termina-ted rapidly using the Starpoint air insertion tool or the handtool.
These diode and link adapters provide a efficient IDC connection to 6.3mm spade terminals. Available with a link or with a series diode fitted to enable use within matrix harness designs.
The Starpoint universal lampholder accomodates both 5 and 10mm wedge base lamps or leds in a single housing. The lampholder itselves allows very compact packing density whilst retaining sufficient airflow to dissipate the heat from the lamps. Standard fitted with a diode for use in matrix systems.
Part no. Description ColourB9S003-01-ZZZZ 7/02mm wire - Link YellowB9S005-01-ZZZZ 7/02mm wire - Diode BeigeB9S011-01-ZZZZ 13/02mm wire - Diode WhiteB9S012-01-ZZZZ 13/02mm wire - Link Blue
Part no. DescriptionG3S001-02-ZZZZ Diode adapter 13/0.2mm red G3S002-02-ZZZZ Diode adapter 7/0.2mm blackG3S004-02-ZZZZ Link adapter 13/0.2mm whiteG3S005-02-ZZZZ Link adapter 7/0.2mm beige
Part no. DescriptionB9S001-04-ZZZZ Universal lampholder
• Designed for quick, positive clip fixing.• Suitable for panels 1mm to 2mm thickness. • Accomodates 10mm wedge base lamps or leds. • Available with integrally mounted diode or wire link. • Termination with 7/0.2mm or 13/0.2mm wire. • Colourcoded for easy recognition.
• Fast and efficient connection to 6.3mm spade terminals.• Available for 2 wire sizes, 7/0.2mm or 13/0.2mm. • Colour coded for easy recognition.
• Accepts both 5 and 10mm lamps or leds in same housing.• Simple “push” to fit and “twist and pull” removal. • Suitable for panels 1mm to 2mm thickness. • Very compact design. • IDC connection with 7/0.2mm wire.
16,0 6,7
20,4
13,0
S U Z O I N T E R N A T I O N A L124
Gaming CatalogueLighting/LEDProducts
• These LEDS have been designed especially for the gaming market based on superior quality. • 5mm - T 1-1/2. • Original Nichia LED inside. • Real white colour. • No colour differences. Single bin product. • Wide viewing angle 120-140º. • Available in 6 and 12V. • Datasheet available upon request .
Wedge Base LEDS 5mm
Part no. Description161-306059 LED 5mm 6V white161-412059 LED 5mm 12V white
• 5mm - T 1-1/2. • 5 -12 or 24Vdc. • Wide viewing angle. • Competitive pricing. • Available in red, yellow, green, blue and white. • White leds colour sorted per box. • Datasheet available upon request.
Wedge Base LEDS 5mm
Part no. Description161-205052 LED 5mm 5V red161-205054 LED 5mm 5V yellow161-205055 LED 5mm 5V green161-205056 LED 5mm 5V blue161-205059 LED 5mm 5V white161-212052 LED 5mm 12V red161-212054 LED 5mm 12V yellow161-212055 LED 5mm 12V green161-212056 LED 5mm 12V blue161-212059 LED 5mm 12V white161-224052 LED 5mm 24V red161-224054 LED 5mm 24V yellow161-224055 LED 5mm 24V green 161-224056 LED 5mm 24V blue161-224059 LED 5mm 24V white
• Cluster of 3 LEDS in 10mm housing. • Available in 5 - 12 and 24V. • Wide viewing angle. • Available in red, yellow, green, blue and white. • White leds colour sorted per box. • Datasheet available upon request.
Wedge Base Cluster LEDS 10mm
Part no. Description161-205103-2 Cluster LED 5V 10mm red161-205103-4 Cluster LED 5V 10mm yellow161-205103-5 Cluster LED 5V 10mm green161-205103-6 Cluster LED 5V 10mm blue161-205103-9 Cluster LED 5V 10mm white161-212103-2 Cluster LED 12V 10mm red161-212103-4 Cluster LED 12V 10mm yellow161-212103-5 Cluster LED 12V 10mm green161-212103-6 Cluster LED 12V 10mm blue161-212103-9 Cluster LED 12V 10mm white161-224103-2 Cluster LED 24V 10mm red161-224103-4 Cluster LED 24V 10mm yellow161-224103-5 Cluster LED 24V 10mm green161-224103-6 Cluster LED 24V 10mm blue161-224103-9 Cluster LED 24V 10mm white
PRODUCT
INSIDE
Item Absolute Max Rating UnitForward Current 30 mA
*Pulse Forward Current 100 mAOperating Temperature -30 ~ +85 ºC
(1) Absolute maximum ratings:
Item Condition Min Typ Max UnitLuminous Intensity IF = 20[mA] 340 410 480 mcd
(2) Initial Electrical and Optical Characteristics: Ta = 25ºC
LEDS are the longest lasting,most maintenance free lighting source available.
Long lifetime up to 100.000 hours. Energy saving more then 80%.
Very low power consumption and less heat generation.
All these Wedge base LED’s should not be used in lamp matrix systems.
*Conditions: Pulse width < 10msec and duty < 1/10
• Single LED’s. • Extremely competitive pricing. • Available in 12V only. • T3-1/4 - 10mm size. • Available in 5 colours.
Wedge Base LED’s 10mm
Part no. Description161-12104 Single LED 10mm 12V yellow161-12105 Single LED 10mm 12V green161-12106 Single LED 10mm 12V blue161-12109 Single LED 10mm 12V white
All these Wedge base LED’s should not be used in lamp matrix systems
LED Insertion Tool• Handy tool to avoid damage to LED resistor and static electricity. • Also prevents blisters when inserting many LEDs. • For 5mm Wedge T 1-3/4 base LEDs.
Part no. DescriptionH92-1396-00 LED Insertion tool
W W W . S U Z O . C O M 125
Gaming CatalogueLighting
• Used in progressive jackpot signs above slotmachines. • 2-wire base T1.5 (Tivoli style).
• 2-wire base T1.5 ( Tivoli style ). • Only available in white.
Tivoli Base LEDS 28V
Tivoli Base LEDS 12V
Part no. Description161-0128-2 Tivoli LED 28V red161-0128-4 Tivoli LED 28V yellow161-0128-5 Tivoli LED 28V green161-0128-6 Tivoli LED 28V blue161-0128-9 Tivoli LED 28V white
• 100 mtr / 330 ft per roll. • Standard available in 28V - white, other voltages and/or colours available upon request. • LED distance: 17.78mm / 7”. • 566 leds per roll.
Tivoli Base LED String
Part no. Description161-0003 Tivoli led string 28V white
Part no. Description161-0112-9 Tivoli led 12V white
Light Pro LED Lamp AssemblyStop changing fluorescents and replacing ballasts!• LED lamp assembly replaces traditional fluorescents. • End caps can be removed and adjusted to maximize lighting. • For IGT machines simply plug the LED assembly harness into the lead that goes into the 24v electronic ballast.• Custom configurations and other sizes available. • Mounts in fluorescent sockets same as a fluorescent. • Super bright flat LEDs in round clear 5/8” tube. • 5-year life expectancy, low power, low heat, mercury free; up to 78% in energy savings. • No ballast required; saves you money on replacement and maintenance costs. • For other machines, use 24V line. • RoHS compliant. • Low current 24V AC/DC. • Custom Sizes Available.
Part no. DescriptionH91-1017-00 Light Pro F15/T8 LED Lamp AssemblyH91-1026-00 Light Pro F6/T5 LED Lamp AssemblyH91-1046-00 Adapter Harness for Aristocrat Games
Connector View
Towerlight LED• This led has been designed for use in towerlights where 12V wedge base lamps are used. • Decreases power consumption by 60%. • Avoid time consuming replacements of lamps in this difficult location in your machine. • 10mm wedge base fitting. • 12V 40mA. • Only available in white colour.
Part no. Description161-0020-9 Towerlight LED
Starpoint 5mm LED• These leds are designed for use in Starpoint series 2 buttons and other pushbuttons.• Mounting pins ensure perfect connection in series 2 lampholder. • Replaces 5mm wedge base lamps.• Only available in white.• Detailed datasheet available.• 12Vdc.
Part no. DescriptionC9C026-02-ZZZZ White LED 5mm
Flexible Neon LED Rope Lights• Diffuse led illumination. • Looks like real neon. • Available in red, green, warm white, ultra pink and blue colour. • All 12Vdc, blue colour is also available in 24Vdc. • Consumes 9.4W per meter. • Can be bend to a minimum radius of 4cm. • Can be cut to desired length. • Sold per meter, complete drum holds 50 meter. • End caps and connecting clips also available.
Part no. DescriptionQL0011 Red neon led 12VdcQL0012 Green neon led 12VdcQL0013 W/White neon led 12VdcQL0014 Ultra pink neon led 12VdcQL0015 Blue neon led 12VdcH91-4852-00 Blue neon led 24VdcH91-5051-00 End capH91-4951-00 Male connecting clipQL0017 Aluminium channel 1mtrQL0019 PVC Channel 1mtr
Flexible Flat LED Rope Lights• Durable and superbright. • Available in amber, red, green or blue colour. • All 12Vdc. • With 36,108 or 144 leds per meter. • Cut to desired length.
Part no. DescriptionQL0001 36 led amber / 36 led red 12V mixedQL0002 36 led red 12V / 36 led blue 12V mixedQL0009 36 led blue 12VQL0010 36 led green 12VQL0003 108 led red 12VQL0004 108 led green 12VQL0005 144 led red 12VQL0006 144 led amber 12V
Round LED Rope Lights• 36 leds per meter. • Cut to desired length.• 12Vdc.
Part no. DescriptionQL0007 Red led ropelight roundQL0008 Amber led ropelight round
QL0011 Red
QL0012 Green
QL0013 White
QL0014 Ultra Pink
QL0015 Blue
S U Z O I N T E R N A T I O N A L126
Gaming CatalogueLighting
Slant Top Display Side Panels• Replaces F4 lamp and entire fixture assembly. • Metal housing stabilizes brackets from falling out . • Improved colour dispersion without shadows. • Direct replacement, plug-in convenience. • 5-8 year life span.• Low heat generation, 70% lower power consumption. • Easy to install, no tools required. • Power cord supplied for direct plug-in, operates on 12 volts DC.
Part no. DescriptionH70-1821-00 Display Panel for 17” Slant topsH70-1822-00 Display Panel for 19” Slant tops
* Graphic Panel not included
* Validator Bezel not included
Slant Top Bill Validator Displays• Greatly improve your bill face lighting. • Direct replacement, plug-in convenience. • Equipped with connector to interface with machine harness. • Low heat generation, 50% lower power consumption. • Easy to install, no tools required. • Operates on 13.5 volts DC.
Part no. DescriptionH70-1815-00 Slant Top Display, white LEDsH70-1816-00 Slant Top Display, Yellow/Green LEDs
* Graphic Panel not included
LED Denom Arrow Panels• Direct replacement, plug-in convenience. • 5-10 year life span. • Equipped with connector to interface with machine harness. • Low heat generation, 50% lower power consumption. • Easy to install, no tools required. • Operates on 12 volts DC.
Part no. DescriptionH70-1817-00 Arrow panel for IGT Game King UprightH70-1818-00 Arrow panel for “I” Games
* Graphic Panel not included
6000 Denom LED Panel for Bally• Direct LED display replacement panel. • Contains two LED boards, replacing original incandescent lamps. • Equipped with connector to interface with Bally power harness. • Installed in minutes, no special tools required. • 5-8 year life span with 75% lower power consumption. • Operates on 7.5 volts DC or AC.
Part no. DescriptionH70-1813-00 6000 Denom LED Panel
* Validator Bezel not included
S2000 Bill Validator Display Board• LED lighted PCB with new bracket. • Bright green bill face and yellow panel. • Equipped with connector to interface with original machine harness. • Installed in minutes with only a screwdriver. • 5-8 year life span. • Operates on 12 volts DC.
Part no. DescriptionH70-1814-00 2000 Bill Validator Display
Ticket Printer Arrow LED Boards• Save money by replacing original boards that prematurely burn out.
Part no. DescriptionH70-1860-00 Ticket Printer Arrow LED Board, IGT Slant TopsH70-1861-00 Ticket Printer Arrow LED Board, IGT Uprights
Reel Denom Area LED Board• Replaces the incandescent lamp on reel machines. • Direct plug-in solution, brighter than the original lamp .
Part no. DescriptionH70-1862-00 Reel Denom Area LED Board
• Replaces F14 or F15 fluorescent lamp in IGT 17” and 19” top boxes and upright belly glass. • Diamond cut diffusing panel provides even illumination. • Easy installation, just remove the fluorescent lamp, pop in the LED panel and the ballast power plug goes directly into the LED panel. • Low power consumption means less heat generated.
High Intensity LED for IGT Games
H70-4187-00
H70-3917-00
Part no. Used in Description
H70-2776-00 IGT 17” & 19” Top Box
F14 Replacement with horizontal plug configuration
H70-4187-00 IGT 17” & 19” Top Box
F14 Replacement with vertical plug configuration
H70-4096-00 IGT 17” & 19” Top Box
F15 Replacement with horizontal plug configuration
H70-4006-00 IGT 17” & 19” Top Box
F15 Replacement with vertical plug configuration
H70-3917-00 IGT Upright Belly Glass
F15 Replacement with Drop-in bracket system
Part no. DescriptionH91-3161-00 LED Edge-Lit Panel for Konami Belly Glass
LED Edge-Lit Panel for Konami Belly Glass• Replacement for all Konami belly glass that is currently edge-lit with cold cathode lamps. • Powered by 12 volts directly, so there is NO inverter, ballast or adapter needed. • Just plug the power cord directly into the existing Molex connector that currently provides 12 volts of power to the CCFL inverter. • LED’s will not break when the Drop Crews let the door drop and then slam it closed.
W W W . S U Z O . C O M 127
Gaming CatalogueLightingLighting / CCFL Products
Cold Cathode Lamps
Part no. DescriptionH50-0446-00UL Cold cathode lamp 3.0 x 325mmH50-0348-00UL Cold cathode lamp 3.0 x 400mm
Cold Cathode Lamps with Reflector
Part no. DescriptionH50-0446-90UL Cold cathode lamp 3.0 x 325mmH50-0348-90UL Cold cathode lamp 3.0 x 400mm
Steel Clip for Cold Cathode Lamps
Inverters for Cold Cathode Lamps
Power Harness Extension
Part no. DescriptionH95-2505-00 Steel clip
Part no. DescriptionH96-0640-00 Power harness extension
Part no. DescriptionH50-0449-00UL Inverter for 1 3.0 x 325mm CCFLH50-0540-00UL Inverter for 1 3.0 x 400mm CCFLH50-0448-00UL Inverter for 2 3.0 x 325mm CCFLH50-0349-00UL Inverter for 2 3.0 x 400mm CCFL
• Energy efficient converting more energy to light output instead of heat, uses 75% less power. • Ideal for gaming panels and lighting signage. • Provides bright white lighting at 6.500º K, significantly less heat than fluorescent lamps. • Long life lasting more then 20.000 hours.
• All lamps includes acrylic protection covers. • Available in 325 or 400 millimeter length. • UL approved.
• All lamps includes acrylic protection covers. • Available in 325 or 400 millimeter length. • Included painted reflector for better light output. • UL approved.
• Will hold all cold cathode lamps with acrylic cover.
• For use with 1 or 2 cold cathode lamps. • UL approved. • Connection cable sold separately.
• To connect 2 CCFL inverters to 1 powersupply or 1 power harness. • Length: 120cm.
Halogen Lamps used in Cranes, Pushers and other Applications
50W MR16 Projection Lamp• 12V, 50W projection lamp with 30 degree flood beam spread. • Used in casino signs. • 3.000K colour temperature. • 5.000 life hours. • 2-pin GX5.3 base.
Part no. DescriptionH91-0677-00 MR16 Projection Lamp
Denom Panel LED Board for IGT S2000• Replaces incandescent lamps with crisp white LED display. • Decreases power consumption by 60%. • Powered by integrated connector interface from existing machine socket. • Easy installation; no modification, rewiring, cutting or drilling necessary. • Operates on existing 13.5V power supply.
Part no. DescriptionH70-1850-00 Denom Panel LED Board for IGT S2000
Belly Glass LED Display Panel for IGT• Specially designed LED array using the latest LED driver technology. • Custom designed mounting bracket . • Bolts easily onto existing door panel, no modifications needed. • No ballast required, providing additional energy savings. • Return on investment is typically less than one year.
Part no. DescriptionH70-1866-00 Belly Glass LED Display Panel for IGT
LED Display Board for Large Graphic Panels• LED board for large belly glass and topper graphic panels Ideal replacement for S2000, most slant top machines, and upright video poker topper panels. • Two minute installation with no modifications to original hardware or wiring. • Consumes 1/6th of the energy versus a standard fluorescent lamp. • Special hardware packs sold separately.
Part no. DescriptionH70-1867-00 LED Display Board for Large Graphic Panels
• Raw cold cathode lamps without any wire harness attached. • To install just un-solder the old cold cathode lamps from the existing wire harness and re-solder the new lamp.
Cold Cathode Lamps for LCD Monitors
Part no. DescriptionH91-6787-00 CCFL for Aristocrat 15” LCDH91-6904-00 CCFL for Aristocrat 17” LCDH91-7022-00 CCFL for Aristocrat 19” LCD
H91-7141-00 CCFL for Atronic 15” LCDH91-7261-00 CCFL for Atronic 17” LCDH91-7382-00 CCFL for Atronic 19” LCD
Aristocrat
Atronic
H91-7627-00 CCFL for Bally 15” LCDH91-1712-00 CCFL for Bally 19” LCDH91-7751-00 CCFL for Bally 20” LCD
Bally
H91-8912-00 CCFL for Konami 17” LCDH91-1954-00 CCFL for Konami 19” LCD
Konami
H91-7876-00 CCFL for IGT 10” LCDH91-8002-00 CCFL for IGT 15” LCDH91-8129-00 CCFL for IGT 17” LCDH91-8257-00 CCFL for IGT 19” LCD
IGT
H91-11027-00 CCFL for WMS 19” LCDH91-9317-00 CCFL for WMS 22” LCD
WMS
S U Z O I N T E R N A T I O N A L128
Gaming CatalogueLighting
Cold Cathodes for Samsung and AU Optronics LCD Panels• For all 15”, 17”, and 19” Samsung and AU Optronics LCD panels. • No connectors or harnessing included. • Sold in lots of 10, 25 and 50 pieces.
Part no. DescriptionH91-1597-00 Cold Cathode for 15” LCD MonitorH91-1486-00 Cold Cathode for 17” LCD MonitorH91-1541-00 Cold Cathode for 19” LCD Monitor
Cold Cathode for Bally M9000• Single raw cold cathode for Bally M9000 game with 19/20” Tatung LCD # L19LA25M21LC02 or #L195A25M21LB01. • No wiring or connectors included. • Rated at 70.000 hours.
Part no. DescriptionH91-1712-00 Cold Cathode for Bally M9000
Cold Cathode for Bally I-View Player Tracking System• For use on 1st generation IDW or 2nd generation Hitachi 6.2’ LCD panel. • Rated at 70.000 hours.
H91-0947-00
H91-0862-00
Part no. DescriptionH91-0947-00 For IDW LCD panelH91-0862-00 For Hitachi LCD panel
Cold Cathode for IGT Nexgen Player Tracking System• For use with Hitachi 6.2” LCD panel. • Rated at 70.000 hours. • With or without wiring harness. • Sold in multiples of 10.
Part no. DescriptionH91-1056-00 Cold Cathode with wiring harness
Cold Cathode for Atronic Slot Machines• For Atronic video slots that use a 17” LCD monitor. • Dual 70,000 hour cold cathode lamp assembly. • Includes wire harness, silicone end caps, and connectors.
Part no. DescriptionH91-1432-00 Cold Cathode lamp for Atronic 17” LCD monitors
Cold Cathode for WMS Smart LCD and 19” Fujlysu LCD
• Single raw cold cathode lamp for WMS slot machine with 19” Smart Technology LCD #SV3190W. • Single raw cold cathode lamp for WMS slot machine with 19” Fujlysu LCD. • No wiring or connectors included. • Rated at 70.000 hours.
Part no. DescriptionH91-2017-00 Cold Cathode for WMS Smart LCD
Part no. Fujlysu No. Description
H91-2081-00 FLC48SXC8B- 11AA Cold Cathode for WMS 19” Fujlysu LCD
Cold Cathode Assembly for WMS Bluebird• For use in WMS Bluebird slot machines that use a 18” LCD monitor. • Convenient “plug-n-play” assembly. • 3-cold cathode assembly rated at 70,000 hours. • Wiring harness and connectors included.
Part no. DescriptionH91-1006-10 Cold Cathode assembly for WMS Bluebird
Cold Cathode for WMS Bluebird• Triple cold cathode replacement assembly for WMS Bluebird slots with 17” LCD monitor. • Includes three 70.000 hour cold cathode lamps, attached wire harness, connectors and silicone end caps.
Part no. DescriptionH91-2820-00 Cold Cathode assembly for WMS Bluebird
Cold Cathode for WMS Bluebird Bonus Screen• Single lamp assembly for 6.4” LCD (LG #LB064V02) in WMS BlueBird bonus screen. • Includes wiring and connectors. • Rated at 70.000 hours.
Part no. DescriptionH91-1771-00 Cold Cathode for WMS Bluebird bonus screen
Cold Cathode for Konami Belly Glass and Konami Games • Single raw cold cathode lamp for Konami belly glass that is backlit with cold cathode lamps. • Single raw cold cathode for Konami games with 19” Kortek LCD monitors. • No wiring or connectors included. • Rated at 70.000 hours.
Part no. DescriptionH91-2146-00 Cold Cathode for Konami Belly GlassH91-1954-00 Cold Cathode for Konami Games
Cold Cathode for Konami Denomination Panel• Single cold cathode assembly for Konami upright video denomination backlit panel. • Includes wiring and connector. • Rated at 70.000 hours
Part no. DescriptionH91-1831-00 Cold Cathode for Konami denomination panel
Cold Cathode for Konami Machines• Dual cold cathode lamp assembly for Konami slot machines with a 17” LCD monitor. • Wiring harness and connectors included. • Lamps rated at 70.000 hours
Part no. DescriptionH91-1654-00 Cold Cathode for Konami machines
Cold Cathode for Konami Slots• For Konami slot machines with cold cathode edge-lit belly glass. • Dual 70.000 hour cold cathode lamp assembly • Includes one aluminum encased dual output 12V Piezo matching inverter. • Lamp assembly includes wire harness, silicone end caps and connectors attached.
Part no. DescriptionH91-1379-00 Cold Cathode for Konami slots