Micron Inspection and Calibration Services, Inc. Providing quality service for nearly 15-years
Local Fast response, no travel cost, free pick up/delivery
Privately owned Personalized service
Stable Nearly 15-years of experience
One-stop-shop Mechanical/Electrical Calibration, Dimensional Inspection,
Calibration Training, ISO 9001
High quality A2LA accredited to ISO/IEC 17025 and ANSI/NCSL Z540-1
Delivery Within 5-business days
Cost Reasonable and competitive, no extra charge for urgent needs
On-Site calibration Never slows the flow of production at your company, same day
service at regular price, saves shipping costs
Visit us any time You and your customer are always welcome visit us to witness the inspection activity.
Micron Advantage
Accreditation and Proficiency Testing Providers
The American Association of Laboratory Accreditation (A2LA): an organization accrediting companies with globally accepted criteria of competence to ensure the integrity and quality of all services.
National Association of Proficiency Testing (NAPT): a proficiency testing company that offers unbiased analysis of measurements to evaluate a company’s proficiency and competency.
Our Calibration Equipment
Mahr 828 CiM measures up to 40” in length. It is used to measure Cylindrical Plugs, Rings and Length Standards.
Helios Supra measures up to 20” in length. It is used to measure Thread Plugs, Thread Rings.
Fluke 5520A is used for calibration of electrical instruments.
Edmunds Gauge Block Comparator calibrates up to 20” long Gauge Blocks.
Mechanical Gauge Calibration
Angle BlocksAngle PlatesBore gauges DialBore MicrometersCalipersCoating Thickness GaugesCoordinate Measuring MachinesCrimping ToolsCylindrical PlugsCylindrical RingsDurometersFloor ScalesForce gaugesFunctional gaugesGauge BlocksGram ScalesGroove GaugesHardness TestersHeight gaugesHeight MastersIndicatorsInside MicrometersLength StandardsLong Gauge BlocksLVDTsMicrometers
Optical ComparatorsOvensPin Gauge SetsPrecision LevelsPressure GaugesProtractorsStop WatchesSurface PlatesTape MeasuresTapered PlugsThermometersThread Pitch Length StandardsThread Pitch MicrometersThread PlugsThread RingsThread Set PlugsToolmakers’ MicroscopesTorque ScrewdriversTorque TestersTorque WatchesTorque WrenchesVacuum GaugesVision Systems
• AND MUCH MORE. PLEASE CALL IF YOUR GAUGE IS NOT LISTED HERE.
Electrical Instrument Calibration
Ammeter
Amplifiers
Analog Multi-meters
Attenuators
Audio Test Sets
Calibrators
Capacitance Meters
Clamp Meters
Counters/Timers
Current Probes
Decade Box
Digital Multi-Meter
Directional Couplers
Distortion Analyzers
Frequency Counters
Function Generators
Hi-pot Testers
Impedance Bridges
Insulation Testers
LCR Meters
Meg-Ohmmeters Meter
Oscillators
Oscilloscopes
Ovens
Panel Meters
Phase Angle
Volt Meters
Phase Harmonics Analyzers
Power Splitters
Power Supplies
Process Calibrators
Ratio Shunts
Signal Generators
Sweep Generators
SWR Meters
Thermocouple Testers
Thermocouples/RTD
Thermometers
Timers
Transformers
Voltages Dividers
Watt Meters • AND MUCH MORE. PLEASE CALL IF
YOUR GAUGE IS NOT LISTED HERE.
Contact Dimensional Inspection
This method is suitable for inspecting castings, machined parts, or parts made of hard material. A touch-probe makes contact with the surface when measuring. The probe can be articulated at any angle. This service includes the following:
First Article Inspection
PPAP
Gauge R & R
Capability Study, Histograms, Cp, Cpk
Statistical analysis such as ANOVA, Box Plots, etc.
Micron’s fully programmable B&S CMM machine
Non-Contact Dimensional Inspection
This method is suitable for inspecting flat parts made of softer materials. Here, the parts are simply placed under the video camera, which captures the part picture and displays it on the video terminal for subsequent measurement activity. This service includes the following:
First Article Inspection
PPAP
Gauge R & R
Capability Study, Histograms, Cp, Cpk
Statistical analysis such as ANOVA, Box Plots, etc.
.
Micron’s fully programmable OGP Quest machine. We also have two more
similar machines.
What Our Customers Are Saying
…I am a very satisfied customer and look forward to doing business with you for years to come.You have a very good staff and I enjoy working with Jim and Julie.
Bryan – Consumer Products
You have provided excellent customer service, and I can always depend on your help when needed.
Phil –Transportation
Thanks for all your help and quick response to our needs.
Ed – Connector Industry
Thanks for your service. MUCH APPRECIATED!
Mike – Medical Industry
It is very good working with you & Micron. Your company is probably the company that I interact with most frequently. I am pleased with your work.
Mark – Defense
I am very pleased with your company.
David – Automotive
Please call us to discuss your needs. Thank you.717-266-5775
General Information
Mr. Avyayam DavePresident, Founder
Legal Name York Inspection and Testing Services, Inc.
D/B/A Micron Inspection and Calibration Services, Inc.
Year Founded 1997
Address 4308 North George Street, Manchester, PA 17345
EIN # 23-292 5057
D&B # 04-887-0732
NAICS Code 541380
SIC Code 87349902
CAGE Code 1YT83
Size 2400 sq ft
Shifts 1
Employees 6
Accreditation ISO/IEC 17025
ANSI/NCSL Z540-1
Phone 717-266-5775
FAX 717-266-6740
E-Mail [email protected]
Web Address www.micronpa.com