microcote anti-slip€¦ · microcote anti-slip is a high performance protective coating and wear surface that can be applied to many different substrates to improve floor friction

www.biosurfaces.com.au

microcoteanti-slip

microcote anti-slip is a high performance protective coating and wear surface that can be applied to many different substrates to improve floor friction for safety and compliance.

» Suitable for high traffic areas, wet areas, kitchens and manufacturing plants

» Internal and external applications in clear or colour

» Environmentally friendly solvent-free, very low VOC and virtually odourless

IMPROVING FLOOR SAFETY

microcote anti-slip with Griplok™ additives can improve floor friction on most substrates for safety and compliance.

» Options for slip ratings from P3–P5

» Mix in additives for one coat application

» Suitable for concrete, vinyl, ceramics, stone, steel, timber and more

» Can be cleaned by scrubbing or pressure washing (refer microcote Cleaning and Maintenance Guide)

microcoteanti-slip

BEFORE AFTER

Ceramic tile and grout restoration with microcote anti-slip Gloss.

www.biosurfaces.com.auCALL US NOW ON 1300 768 468

www.biosurfaces.com.au

BEFORE AFTER

One coat microcote anti-slip yellow installed over a pebbled epoxy.

SAFETY ZONES, LINE MARKING AND WAYFARING

microcote anti-slip has standard yellow, red and white colours (custom colours available) designed for one coat application over many substrates.

» With or without GripLok™ additives

» Ideal for critical areas where downtime and odour are a factor

» Suitable for wet areas, kitchens and manufacturing

» More durable than anti-slip and line marking tapes

microcote anti-slip GRIPLOK™ ADDITIVES

Griplok™ additives have been selected for their durability and ability to achieve slip standards for compliance.

» Griplok™ Standard is recommended for smooth and lightly textured surfaces, internal and external applications. up to P5 slip rating. Typically one coat.

» Griplok™ Max is recommended for wet and greasy areas, ramps and kitchens where P5 slip rating is required. Two coat system with Griplok™ Max in base coat and lock coat over the top.

» Griplok™ Gloss is recommended for gloss applications where up to P3 slip rating is required while maintaining a full gloss finish.

Disclaimer: The information provided in this document is for information purposes and individual conditions and legislative requirements should be assessed to determine whether microcote anti-slip is appropriate. BioSurfaces Pty Ltd makes no general guarantee as to slip ratings or wear performance.