A2 A1 A2 D²PAK TO-220AB TO-220AB Ins. DPAK IPAK A2 A1 G G A1 A2 G A2 A1 G A2 A2 A2 A2 A1 G A2 A1 G Features • On-state rms current, I T(RMS) 8 A • Repetitive peak off-state voltage, V DRM / V RRM 600 V to 800 V • Triggering gate current, I GT 5 to 50 mA Description Available either in through-hole and surface-mount packages, these devices are suitable for general purpose AC switching. They can be used as an ON/OFF function in applications such as static relays, heating regulation, induction motor starting circuits or for phase control operation in light dimmers and motor speed controllers, etc. The Snubberless versions (BTA, BTB08_xxxxW and T8 series) are specially recommended for use on inductive loads, thanks to their high commutation performance. Logic level versions are designed to interface directly with low power drivers such as Microcontrollers. By using an internal ceramic pad, the BTA series provide voltage insulated tab (rated at 2500 V RMS ) in compliance with UL standards (file ref.: E81734). Product status link BTA08 BTB08 T810 T835 T850 Snubberless™, logic level and standard 8 A Triacs BTA08, BTB08, T810 T835, T850 Datasheet DS2114 - Rev 14 - May 2018 For further information contact your local STMicroelectronics sales office. www.st.com
21
Embed
Microcontrollers. T835, T850 BTA08, BTB08, T810 · A2 A1 A2 D²PAK TO-220AB TO-220AB Ins. IPAK DPAK A2 A1 G G A1 A2 G A2 A1 G A2 A2 A2 A2 A1 G A2 A1 G Features • On-state rms current,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
A2
A1A2
D²PAK
TO-220AB TO-220AB Ins.
DPAKIPAK
A2
A1
G
G
A1A2 G
A2
A1
GA2
A2
A2
A2
A1
GA2
A1
G
Features• On-state rms current, IT(RMS) 8 A• Repetitive peak off-state voltage, VDRM / VRRM 600 V to 800 V• Triggering gate current, IGT 5 to 50 mA
DescriptionAvailable either in through-hole and surface-mount packages, these devices aresuitable for general purpose AC switching. They can be used as an ON/OFF functionin applications such as static relays, heating regulation, induction motor startingcircuits or for phase control operation in light dimmers and motor speed controllers,etc.
The Snubberless versions (BTA, BTB08_xxxxW and T8 series) are speciallyrecommended for use on inductive loads, thanks to their high commutationperformance.
Logic level versions are designed to interface directly with low power drivers such asMicrocontrollers.
By using an internal ceramic pad, the BTA series provide voltage insulated tab (ratedat 2500 VRMS) in compliance with UL standards (file ref.: E81734).
Product status link
BTA08
BTB08
T810
T835
T850
Snubberless™, logic level and standard 8 A Triacs
BTA08, BTB08, T810 T835, T850
Datasheet
DS2114 - Rev 14 - May 2018For further information contact your local STMicroelectronics sales office.
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK®
packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitionsand product status are available at: www.st.com. ECOPACK® is an ST trademark.
Updated Table 2. Electrical characteristics (Tj = 25 °C, unless otherwise specified) Snubberless and logic level (3 quadrants), cover image, Figure 9. Relative variation of critical rate of decrease of main current versus (dV/dt)c (typical values) and Figure 21. Ordering information scheme (T8 series).
14-May-2018 14 Updated product status links.
BTA08, BTB08, T810, T835, T850
DS2114 - Rev 14 page 20/21
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to STproducts and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. STproducts are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design ofPurchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.