Micro Machining

Mic

ro M

achi

ning

Too

ling

Catalog 2090

For further assistance, see general index on page 295.

Micro-Machining Productivity Solutions

www.kennametal.com22

Machined medical parts appearing in the Micro Machining Tooling catalog cover photo were provided courtesy of Sulzer Medica/Sulzer Dental Inc., and by Rose Training Systems.

Catalog 2090 is Kennametal’s response to customer demand for a single-sourcefor proven micro-machining solutions. This new catalog displays Kennametal’scomprehensive line of micro-machining tooling solutions in one convenient resource.Now, whether you’re turning, drilling, or milling, you’ll find world-class productivitysolutions for ALL your micro-machining and small turning centerapplications at your finger tips.

KEY FEATURES:

• KM® Micro ... the focus of Catalog 2090. This unique,revolutionary quick-change tooling system is speciallydesigned to mount on Swiss-Style turning centers,gang machines, and smaller lathes.

• Our micro boring bar offering delivers bores as smallas .062”. Kennametal micro threading bars providethreads as fine as 48 tpi while our micro grooving barsaccept standard .015” width inserts.

• High-speed solid carbide Dynapoint® TF drills, with a triple flute, 130-degree pointdesign, are available in grade K10 and TiAlN-coated grade KC7210. These drills, rangingfrom #33 to 1/2” diameter, are an excellent choice for machining aluminum, non-ferrousmaterials, ductile or gray cast irons, and for titanium short-hole applications.

• Solid carbide Dynapoint® SE drills, from 1/8” to 1/2” diameter, are featured in grade CS5 and TiAlN-coated grade KC7215. The

patented SE point design defines reliability in high-speed,heavy-feed drilling applications, and is ideal for cutting plain carbon, alloy, and tool steel materials.

• A complete line of high-performance solid carbide endmills, ranging in size from 1/64” to 3/8”, is also available.

• The KENNA PERFECT™ Tooling Selection System will quickly direct you to the newest and best Kennametal grades and geometries for your specific

micro-machining application.

• The KENNA UNIVERSAL™ Turning Selection Systemoffers two new versatile grades, KC8050 andKC5010, that are perfect for those short-run jobsmachining a wide variety of workpiece materials,from interrupted roughing to finishing cuts.

Whatever your micro-machining needs may be, Kennametal’s Catalog 2090 puts high-performance,optimal productivity solutions at your finger tips in one convenientcatalog. For additional copies,contact your nearestKennametal location.

333

Table of Contents

page

Inserts . . . . . . . . . . . . . . . . . . . . . . . . 4

KM MicroTM Quick-Change Tooling . . . . . . 139

OD Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163

ID Boring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185

Drills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219

High-Performance Taps . . . . . . . . . . . . . . . . . . . . . 239

End Mills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259

Toolholding Systems . . . . . . . . . . . . . . . . . . . . . . . . 271

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295

Metalcutting Safety . . . . . . . . . . . . . . . . . . . . . . 299

44

A system of grades, geometries, and application guidelines to provide optimal solutions for your metalcutting needs.

KENNA PERFECT™KENNA PERFECT™

Kennametal. The Metalcutting Authority.Kennametal. The Metalcutting Authority.

555

Now it’s easy to determine which Kennametal chip-control cutting tools will work best in your specific workpiece materials and applications!

by Geometry… by Grade…

…and by looking atthe actual Insert!

GEOMETRY:Roughing ∆∆

Medium MachiningFinishing

Fine Finishing

NOSE RADIUS:both ANSI and ISO

APPLICATION:FF, FN, MN, RN, FP, MP, RP, RH, or UN

1

2

3

KENNA PERFECT MATERIAL GROUP: 1 = Steel2 = Stainless Steel3 = Cast Iron 4 = Non-Ferrous 5 = High-Temp Alloy6 = Hardened Material0 = Universal Machining

WEAR/TOUGHNESS ISO RANGE:10 = Highly Wear Resistant

to 50 = Extremely Tough

2

APPLICATION:FF (Fine Finishing) F (Finishing) M (Medium Machining) R (Roughing)HP (High Positive)U (Universal)

EDGE CLASS:N (Negative) P (Positive) S (Sharp)H (Heavy Roughing)

COATING TYPE: 9 = CVD (Chemical Vapor Deposition) 5 = PVD (Physical Vapor Deposition) 8 = Universal

4

5

3

1

Turning System

66

page Turning Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

KENNA PERFECT™ Wiper Insert Selection . . . . . . . . . . . . . . . . . . . . . . . . . 10

KENNA UNIVERSAL Insert Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

KENNA PERFECT Insert Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Insert Identification System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Kenloc Inserts — Lock Pin Geometry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Screw-On Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Application Specific Inserts . . . . . . . . . . . . . . . . . . . . . 59

Top Notch Profiling Insert Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Top Notch Profiling Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Positive Profiling and Boring Inserts

Kendex Mini Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Turning, Boring, and Profiling Inserts

777

SCLC-FKenloc Pin/Clamp Combination

KM Micro Cutting Units

7

Threading Inserts . . . . . . . . . . . . . . . . . . . . . . . 65

Top Notch Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

LT — Laydown Inserts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Grooving Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Top Notch Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

A3 Deep Grooving Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Cutoff Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

A2 Cutoff Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

Backturning, Cutoff, Grooving, and Threading . . . . . . . . . 125

Micro Boring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Threading, Grooving,and Cutoff Inserts

88

®KENNA PERFECT Selection SystemKENNA PERFECT, Kennametal’s 3-step cutting tool selection system, makes choosing and applying the most productive tool as easy as 1, 2, 3.Tool recommendations are based on six workpiece material groups, optimizing selection accuracy.

Example:

6 workpiece material groupsExample: steelPage: 24

Given: depth of cut = .040feed = .016

Unknown: insert geometrySolution: -MN

Given: cutting conditions:lightly interrupted cut

Geometry: -MNUnknown: gradeSolution: KC9125

Select the insert geometry

1st Step

Select the grade

2nd Step

Select the cutting speed

3rd StepGiven: grade KC9125

cutting conditionsUnknown: cutting speedSolution: 750 sfm

999

KENNA PERFECT Selection System

Steel

Stainless Steel

Cast Iron

Non-Ferrous

High-Temp Alloys

Hardened Materials

Cutting Condition

heavily interrupted cut

lightly interrupted cut

varying depth of cut,casting or forging skin

smooth cut,pre-turned surface

KT315

KC9125

KC9110

KT315

KC9040

KC9110

KC9040

KC9040

KC9125

KC9110

-RN-MN-FN-FF

-RN Roughing

Negative Inserts

-MN Medium Machining

-FN Finishing

-FF Fine Finishing

Insert Geometry

KT315

KC9110

KC9110

KC9125

KC9125

KC9125

-MN

KT315

KC9040

KC9110

KC9125

1500(460)

300(90)

450(135)

600(180)

750(225)

900(275)

1050(320)

1200(360)

1350(410)

3rd Step: Cutting Speed Selection

1st Step: Insert Geometry Selection

2nd Step: Grade Selection

Speed - sfm (m/min)

steel

Material Grade

1010

Steel

Stainless Steel

Cast Iron

Hardened Materials

Wiper InsertsWiper Inserts

Three Ways to Improve Your Turning Operations!

Conventional Turning Insertdoc ......0.050feed ......0.012 iprspeed ..1,100 sfmfinish ....160 Ra (µin.)

Kennametal Wiper Technology –MWdoc ..........0.050feed ........0.020 iprspeed ......1,100 sfmfinish ......60 Ra (µin.)

Kennametal introduces three new geometries that are the latest in state-of-the-art turning technology. Our new -RW (Roughing Wiper), -MW (Medium Wiper), and -FW (Finishing Wiper) inserts employ a modified corner radius design which delivers a superior surface finish compared to conventional inserts. This technology enables you to choose the metalcutting benefit that’s most important to your application.

Double ProductivityKennametal’s new wiper geometries enable you to double your current feed rate and still achieve surface finishes comparable to conventionalinserts. You’ll also see equivalent or better tool life using the appropriate KENNA PERFECT grade specifically designed for your workpiece material.

Better Workpiece FinishThese new wiper geometries will also give you a markedly improved surface finish at your current machining conditions. Under typical conditions, you’ll see as much as a 250% improvement in the workpiece surface finish, all with inserts that meet your corner radius specifications.

You choose! Either way, we’re sure you’ll agree that the new wiper geometries from Kennametal provide an outstanding way to optimize your turning operations. Please see the accompanying information for proper application guidelines.

11

1212

®KENNA PERFECT Negative Wipers — SteelCarbon, Alloy, and Tool Steels up to 48 HRC

1st Step – Select the Insert GeometryNegative Wiper Inserts

Insert Geometry



varying depth of cut, casting or forging skin

smooth cut, pre-turned surface

— —

KC9110 KC9125

KT315 KC9110

KT315 KC9110

2nd Step – Select the Grade

–MW–FWCutting Condition

3rd Step – Select the Cutting Speed

-MW

Medium Wiper

-FW

Finishing Wiper

850 260

800 240

600 180

Material GradeSpeed - sfm (m/min)

300(90)

1350(410)

1500(460)

450(135)

600(180)

750(225)

900(275)

1050(320)

1200(360)

Starting Conditions

sfm m/min

steel

KT315

KC9110

KC9125

NOTE: For expert application guidance, see page 633 in Catalog 1010.

850 260

800 240

600 180

KT315

KC9315

KC9225

131313

Carbon, Alloy, and Tool Steels up to 48 HRC

KENNA PERFECT Positive Wipers — Steel

Insert Geometry

1st Step – Select the Insert GeometryPositive Wiper Inserts




KC9225 KC9225

KC9315 KC9315

KT315 KT315




-MW

Medium Wiper

-FW

Finishing Wiper


300(100)

1350(450)

1500(500)

450(150)

600(200)

750(250)

900(300)

1050(350)

1200(400)

Starting Conditions

sfm m/min

steel


1414

®KENNA PERFECT Negative Wipers — Stainless SteelAustenitic Stainless Steels

1st Step – Select the Insert GeometryNegative Wiper Inserts

Insert Geometry





— —

KC9225 KC9240

KC5010 KC9225

KT315 KC9225




-MW

Medium Wiper

-FW

Finishing Wiper

Material GradeSpeed - sfm (m/min) Starting Conditions

sfm m/min

stainlesssteel


300(90)

450(135)

600(180)

750(225)

900(275)

1050(320)

1200(360)

KT315 750 230

KC5010 600 180

KC9225 550 170

KC9240 450 135

151515

Austenitic Stainless Steels

KENNA PERFECT Positive Wipers — Stainless Steel

650 200

600 180

600 180

KT315

KC5010

KC9225

Insert Geometry

1st Step – Select the Insert GeometryPositive Wiper Inserts




KC9225 KC9225

KC5010 KC5010

KT315 KT315




-MW

Medium Wiper

-FW

Finishing Wiper


300(100)

1350(450)

1500(500)

450(150)

600(200)

750(250)

900(300)

1050(350)

1200(400)

Starting Conditions

sfm m/min

stainlesssteel


1616

®Negative Wiper Inserts — Application TechnologySurface Finish

Theoretical Surface Finish – Raµin. (µm)

1/2 IC23 41 63 91 120 160 200 250

—(0,6) (1) (1,6) (2,2) (3) (4) (5) (6,2)

— —

3/4 + 1 IC103 141 184 232 287 347 413

— — — —(2,6) (3,5) (4,6) (5,8) (7,2) (8,7) (10,3)

3/8 IC14 30 50 80

(0,3) (0,75) (1,3) (2)— — — — — — —

FW & MW.008 .012 .016 .020 .024 .028 .032 .036 .040 .044 .048(0,2) (0,3) (0,4) (0,5) (0,6) (0,7) (0,8) (0,9) (1) (1,1) (1,2)

insert feed rate – ipr (mm/rev)

Wiper Insert

How it Works

LEGENDf – feedr – corner radiusrw – wiper radiusRa – surface finish

Standard Insert

Corner Radius Configuration

CNMG and WNMG wiper inserts createa true corner radius on the workpiece,just as a standard insert does.

DNMG and TNMG wiper inserts do not providean exact corner radius on the workpiece. Theradius produced falls within a ±.0025 toleranceband. (blue lines)

171717

C and W Style Inserts

Negative Wiper Inserts — Application TechnologyKenloc Toolholders

Kenloc ToolholdersD and T Style Inserts

S Style Inserts

CN . . 80° corner insert requires MCLN5° reverse lead angle toolholder

CN . . 100° corner insert requires MCRN15° lead angle toolholder

CN . . 100° corner insert requires MCKN15° lead angle toolholder

WN . . 80° corner insertrequires MWLN 5° reverse lead angle toolholder

DN . . 55° corner insert requires MDJN 3° reverse lead angle toolholder

TN . . 60° corner insertrequires MTJN 3° reverse lead angle toolholder

Kenloc Toolholders

SN . . 90° corner insertrequires MSRN 15° lead angle toolholder

NOTE: The holder guidelines above also apply to ceramic/PCBN wiper inserts in similar insert shapes; i.e.: CNGA, CNGX, DNGA, etc.

SN . . 90° corner insertrequires MSKN 15° lead angle toolholder

surface with wiper effectsurface with standard insert edge

surface finish with wiper effectsurface with designated insert nose radiussurface finish with .016 radius

surface with wiper effectsurface with standard insert edge

1818

®Positive Wiper Inserts — Application Technology

-MW

Medium Machining Wiper

-FW

Finishing Wiper

Positive geometry wiper inserts offer the same advantages asnegative style inserts. See page 16 for additional information onwiper technology. When compared to conventional inserts, feedrates can be doubled while maintaining surface finish, or surfacefinish can be improved by a multiple of 2.5 while maintaining pro-ductive feed rates.

Surface Finish

Corner Radius

Theoretical Surface Finish – Raµin. (µm)

3/8 IC 1 4 8 14 22 30 39(0,02) (0,10) (0,20) (0,35) (0,55) (0,75) (1,00)

— — —

1/2 IC 1 2 6 10 16 24 31 39 51 63(0,02) (0,06) (0,15) (0,25) (0,40) (0,60) (0,80) (1,00) (1,30) (1,60)

1/4 IC 1 6 14 22 35 49(0,03) (0,15) (0,35) (0,55) (0,90) (1,25)

— — — —

FW , MW .002 .004 .006 .008 .010 .012 .014 .016 .018 .020

(0,05) (0,10) (0,15) (0,20) (0,25) (0,30) (0,35) (0,40) (0,45) (0,50)

insert feed rate – ipr (mm/rev)

C.MT wiper inserts create a true cornerradius on the workpiece,just as standard inserts do.

CCMT and CPMT Inserts Required Toolholder

C.MT 80° insertrequires SCL5° reverse lead toolholder

C.MT 100° insertrequires SCRC15° lead angletoolholder

C.MT 100° insertrequires SCKC15° lead angletoolholder

surface with wiper effectsurface with designated insertnose radius

1919

PRESENTING

KENNA UNIVERSALKENNA UNIVERSAL…the NEW universal turning system… from the world’s premier metalcutting tooling solutions supplier!Novel, patent-pending technology provides:

• unmatched performance on a variety of workpiece materials

• superior results in finishing through interrupted roughing cuts

-RNRoughing

Medium Machining

Finishing

-MP

-FP

Medium Machining

-MN

KC8050 • The universal grade for roughing and medium machining operations

• Available in four chipbreaker geometries:-RN, -MN, -MP, and -FP

KC5010 • The universal grade for finishing and medium machining

• Available in chipbreaker geometries -FP and -MP

Universal Turning Grades

• 2 Universal Turning Grades — KC8050 and KC5010

• 4 Geometries: -RN Roughing Negative

-MN Medium Negative

-MP Medium Positive

-FP Finishing Positive

• 4 Material Groups: -Steel

-Stainless Steel

-Cast Iron

-High-Temp Alloys

19

2020

®KENNA UNIVERSAL Negative InsertsGeometries for Steel, Stainless Steel, Cast Iron, and High-Temp Alloys

1st Step – Select the Insert Geometry

Medium Machining

Finishing-FP

-MN -MP

Negative Inserts

Insert Geometry





KC8050 — KC8050

KC8050 — KC8050

KC5010 KC8050 —

KC5010 KC5010 —


–MP–FP –MNCutting Condition


Material

steel

stainlesssteel

cast iron

high-tempalloys

Grade 170(50)

330(100)

490(150)

655(200)

820(250)

980(300)

1150(350)

Starting Conditions

sfm m/min

Speed - sfm (m/min.)

KC5010 650 200

KC8050 600 180

KC5010 600 180

KC8050 500 150

KC5010 800 240

KC8050 750 230

KC5010 220 65

KC8050 230 70


212121

Geometries for Steel, Stainless Steel, Cast Iron, and High-Temp Alloys

KENNA UNIVERSAL Positive Inserts


-UFFine Finishing

Medium Machining

Finishing-LF

-MF

Positive Inserts

Insert Geometry





KC5010 KC8050 KC8050

KC5010 KC8050 KC8050

KC5010 KC5010 KC8050

KC5010 KC5010 KC8050


–LF–UF –MFCutting Condition


Material

steel

stainlesssteel

cast iron

high-tempalloys

Grade 170(50)

330(100)

490(150)

655(200)

820(250)

980(300)

1150(350)

Starting Conditions

sfm m/min

Speed - sfm (m/min.)

KC5010 650 200

KC8050 600 180

KC5010 600 180

KC8050 500 150

KC5010 800 240

KC8050 750 230

KC5010 220 65

KC8050 230 70


2222

Steel

Stainless Steel

Cast Iron

Non-Ferrous

High-Temperature Alloys

Hardened Materials

KENNA PERFECTInsertsKENNA PERFECTInserts

232323

• Kennametal’s easy to use 3-step selectionsystem makes choosing the most productivecutting tool as easy asone…two…three!

• The KENNA PERFECTsystem is based on six workpiece materialgroups. Each groupcontains materials withsimilar machinability andmetallurgical properties.

• Based on yourmetalcutting conditions,KENNA PERFECT willrecommend the bestcutting tool material(grade), insert geometry,and starting speedensuring productivityfrom the first chip to the last.

2424

®KENNA PERFECT Negative Inserts — SteelCarbon Alloy and Tool Steels up to 48 HRC

1st Step – Select the Insert GeometryNegative Inserts

Insert Geometry





KC9110 KC9125 KC9040

KC9110 KC9125 KC9125

KT315 KC9110 KC9125

KT315 KT315 KC9110


–MN–FN–FFCutting Condition


850 260

800 240

600 180

300 90


300(90)

1350(410)

1500(460)

450(135)

600(180)

750(225)

900(275)

1050(320)

1200(360)

Starting Conditions

sfm m/min

steel

KT315

KC9110

KC9125

KC9040


-MN

Medium Machining

-FN

Finishing

-FF

Fine Finishing

252525

Carbon Alloy and Tool Steels up to 48 HRC

KENNA PERFECT Positive Inserts — Steel

1st Step – Select the Insert GeometryPositive Inserts

Insert Geometry





KC5010 KC9125 KC9240

KC5010 KC9125 KC9125

KT315 KC9110 KC9125

KT315 KT315 KC9110


–MF–LF-11/–UFCutting Condition


800 260

700 215

800 240

600 180

350 110


300(90)

1350(410)

1500(460)

450(135)

600(180)

750(225)

900(275)

1050(320)

1200(360)

Starting Conditions

sfm m/min

steel

KT315

KC5010

KC9110

KC9125

KC9240


-MF

Medium Machining

-LF

Finishing

-11

Fine Finishing

-UF

Fine Finishing

2626

®KENNA PERFECT Negative Inserts — Stainless SteelAustenitic Stainless Steels


Insert Geometry





KC5010 KC9225 KC9245

KC5010 KC9225 KC9240

KT315 KC5010 KC9225

KT315 KT315 KC5010


–MP–FP–FFCutting Condition

-MP

Medium Machining

-FP

Finishing

-FF

Fine Finishing


650 195

600 180

600 180

450 135

300 90


300(90)

900(275)

450(135)

600(180)

750(225)

Starting Conditions

sfm m/min

stainlesssteel

KT315

KC5010

KC9225

KC9240

KC9245


272727

Austenitic Stainless Steels

KENNA PERFECT Positive Inserts — Stainless Steel


Insert Geometry





KC5010 KC9240 KC5025 KC9240

KC5010 KC9225 KC5025 KC9240

KT315 KC5010 KC5010 KC9225

KT315 KT315 KC5010 KC9225


–MF–LF ..GT-LF–11/-UFCutting Condition


650 195

600 180

600 180

450 135


300(90)

900(275)

450(135)

600(180)

750(225)

Starting Conditions

sfm m/min

stainlesssteel

KT315

KC5010

KC9225

KC9240


Medium Machining

-LF

-MF

-11 -UF

. . GT-LF

Finishing

Fine Finishing

2828

®KENNA PERFECT Negative Inserts — Non-Ferrous


low silicon aluminum alloys (hypoeutectic < 12.2% Si) and magnesium alloys

Insert Geometry





— KC5410 KC5410

KD100 KC5410 KC5410

KD100 KC5410 KC5410

KD100 KC5410 KC5410


..MS..GP..MS-F (PCD)Cutting Condition

..MS

Roughing

..GP

Medium Machining

..MS-F (PCD)

Finishing

1800 550

2500 765

KC5410

KD100




800(250)

1600(500)

2400(750)

3200(1000)

4000(1250)

4800(1500)

5600(1750)

6400(2000)

7200(2250)

8000(2500)

Starting Conditions

sfm m/min

non-ferrous


high silicon aluminum alloys (hypereutectic > 12.2% Si) and magnesium alloys

1700 520KD100

800(250)

1600(500)

2400(750)

3200(1000)

Starting Conditions

sfm m/min

non-ferrous

292929

KENNA PERFECT Positive Inserts — Non-Ferrous


low silicon aluminum alloys (hypoeutectic < 12.2% Si) and magnesium alloys





— — KC5410

KD100 KC5410 KC5410

KD100 KC5410 KC5410

KD100 KC5410 KC5410


Cutting Condition

1800 550

2500 765

KC5410

KD100



800(250)

1600(500)

2400(750)

3200(1000)

4000(1250)

4800(1500)

5600(1750)

6400(2000)

7200(2250)

8000(2500)

Starting Conditions

sfm m/min

non-ferrous


high silicon aluminum alloys (hypereutectic > 12.2% Si) and magnesium alloys

1700 520KD100


800(250)

1600(500)

2400(750)

3200(1000)

Starting Conditions

sfm m/min

non-ferrous

..GT-HP

Medium Machining

..GT-LF

Finishing

..GW-F (PCD)

Fine Finishing

Insert Geometry

..GT-HP..GT-LF..GW-F (PCD)

3030

®KENNA PERFECT Negative Inserts — High-Temp Alloys


..GP

Medium Machining

GG-LF

Finishing

Insert Geometry





— —

KC5010 KC5010

KC5010 KC5010

KC5010 KC5010


..GPGG-LFCutting Condition



200 60KC5010



50(15)

150(45)

250(75)

350(110)

Starting Conditions

sfm m/min

Ni, Fe, and Cobased alloys

150 45KC5010

Starting Conditions

sfm m/min

titanium and titanium alloys

60(20)

480(150)

540(165)

120(44)

180(55)

240(75)

300(90)

360(110)

420(130)

313131

KENNA PERFECT Positive Inserts — High-Temp Alloys






— KC5025 KC9240

KC5025 KC5025 KC9240

KC5010 KC5010 KC9240

K313 K313 KC9225KC5010


Cutting Condition



-MF

Medium Machining

..GT-LF

Finishing

..GT-HP

Fine Finishing

Insert Geometry

-MF..GT-LF..GT-HP

150 45

200 60

150 45

180 55

150 45

K313

KC5010

KC5025

KC9225

KC9240



Starting Conditions

sfm m/min

Ni, Fe, andCo basedalloys

50(15)

150(45)

250(75)

350(110)

110 35

175 55

130 40

K313

KC5010

KC5025

Starting Conditions

sfm m/min

titanium and titaniumalloys

60(15)

120(40)

180(55)

240(75)

300(90)

32

in mm C D R S T V W1.2 (5) 5/32 3,97 S4 04 03 03 06 — —1.5 (6) 3/16 4,76 04 05 04 04 08 08 S31.8 (7) 7/32 5,56 05 06 05 05 09 09 03

— .236 6,00 — — 06 — — — —2 1/4 6,35 06 07 06 06 11 11 04

2.5 5/16 7,94 08 09 07 07 13 13 05— .315 8,00 — — 08 — — — —3 3/8 9,52 09 11 09 09 16 16 06— .394 10,00 — — 10 — — — —3.5 7/16 11,11 11 13 11 11 19 19 07— .472 12,00 — — 12 — — — —4 1/2 12,70 12 15 12 12 22 22 08

4.5 9/16 14,29 14 17 14 14 24 24 095 5/8 15,88 16 19 15 15 27 27 10— .630 16,00 — — 16 — — — —5.5 11/16 17,46 17 21 17 17 30 30 116 3/4 19,05 19 23 19 19 33 33 13— .787 20,00 — — 20 — — — —7 7/8 22,22 22 27 22 22 38 38 15— .984 25,00 — — 25 — — — —8 1 25,40 25 31 25 25 44 44 1710 1 1/4 31,75 32 38 31 31 54 54 21— 1.260 32,00 — — 32 — — — —

inch

tolerance on “m”

N—0°A—3°B—5°C—7°P—11°D—15°E—20°F—25°G—30°

inchIC

metric cuttingedge length

NOTE:Inch sizes in parenthesis for

“alternate symbols” D or E (under 1/4 inch IC).

C ±.0010 ±0,025 ±.0005 ±0,013 ±.001 ±0,025

H ±.0005 ±0,013 ±.0005 ±0,013 ±.001 ±0,025

E ±.0010 ±0,025 ±.0010 ±0,025 ±.001 ±0,025

G ±.0010 ±0,025 ±.0010 ±0,025 ±.005 ±0,13

M See tables at right. See tables at right. ±.005 ±0,13

U See tables at right. See tables at right. ±.005 ±0,13

tolerances: apply prior to edge prep and coating

d: theoretical diameter of the insert inscribed circles : thicknessm : See figures below.

toleranceclass

tolerance on “d” tolerance on “s”

inch inchmm mmmm

S square 90

T triangular 60

C 80

D 55

Erhombic

75

F (diamond) 50

M 86

V 35

W trigon 80

H hexagonal 120

O octagonal 135

P pentagonal 108

L rectangular 90

Aparallelogram-

85

Bshaped

82

N/K 55

R round —

symbol hole shape of hole chipbreakershape of insert’s ordinary IC less

section system than 1/4"*

alternate symbols

*Inch system only.

N without N

R without single sided R E

F double sided F

A without A

M, P, S cylindrical hole single sided M

G, P, Z double sided G

W partly cylindrical without Ahole, 40-60°

T countersink single sided M

Q with partly cylindrical without A Dhole, 40-60°

U double countersink double sided G

B partly cylindrical without Ahole, 70-90°

H countersink single sided M

C partly cylindrical without Ahole, 70-90°

J double countersink double sided G

X special X X

®Turning and Boring Insert Identification System

1.Insert Shape

3.Tolerance

2.Relief Angle

4.Insert Type

5.Insert Size

symbolinsert shape

nose angleshape (degree)

METRIC INSERTS

INCH INSERTSC N M G

12 04 08

4 3 2

33

symbol thickness

inch metric inch mm

symbol size

inch metric inch mm

F sharpFF fine finishingFN finishing

MN medium machining negative

RN roughing negativeUN universal negativeFP finishing positiveMP medium positiveRP roughing positiveRM roughing mediumRH roughing heavyFW finishing wiperMW medium wiper

RW roughing wiperHP high positive-11 fine finishingK light feed chip controlUF ultra-fine finishingLF light finishingMF medium finishingD duo tip hone onlyE hone onlyT negative landS negative land plus honeM mini tip (brazed PCBN)EFW honed, finishing wiper

X0 X0 .0015 0,040 01 .004 0,1.5 02 .008 0,21 04 1/64 0,42 08 1/32 0,83 12 3/64 1,24 16 1/16 1,65 20 5/64 2,06 24 3/32 2,47 28 7/64 2,88 32 1/8 3,2— 00 round insert (inch)— M0 round insert (metric)

d

inch mm inch mm inch mm inch mm inch mm

shapesS, T, C, R, & W shape“D” shape “V” shapes “S, T, & C”

class “M” tolerance

± tolerance on “d”

d

inch mm inch mm inch mm inch mm inch mm

shapesS, T, C, R, & W shape“D” shape “V” shapes “S, T, & C”

class “M” tolerance class “U” tolerance

± tolerance on “d”

NOTE: Inch sizes in parenthesis for “alternate symbols” D or E (under 1/4 inch IC).

5/32 3,97 — — — — — —

3/16 4,76 — — — —

7/32 5,56.002 0,05

1/4 6,35 .002 0,05 .002 0,05 .003 0,06

5/16 7,94

3/8 9,52

7/16 11,11

1/2 12,70 .003 0,06 .003 0,06 .003 0,06 .005 0,13

9/16 14,29

5/8 15,88

11/16 17,46 .004 0,10 .004 0,10 .004 0,10 .007 0,18

3/4 19,05

7/8 22,22.005 0,13

— — — —

1 25,40 — — — — .010 0,25

1 1/4 31,75 .006 0,15 — — — —

5/32 3,97 — — — — — —

3/16 4,76 — — — —

7/32 5,56.003 0,06

— —

1/4 6,35.004 0,11

— — .005 0,13

5/16 7,94 — —

3/8 9,52 .007 0,18

7/16 11,11 — — — —

1/2 12,70 .005 0,13 .006 0,15 .010 0,25 .008 0,20

9/16 14,29 — — — —

5/8 15,88 — —

11/16 17,46 .006 0,15 .007 0,18 — — .011 0,27

3/4 19,05 — —

7/8 22,22 — — — —

1 25,40 .007 0,18 — — — — .015 0,38

1 1/4 31,75 .008 0,20 — — — —

.5 (1) — 1/32 0,79

.6 T0 .040 1,00

1 (2) 01 1/16 1,59

1.2 T1 5.64 1,98

1.5 (3) 02 3/32 2,38

2 03 1/8 3,18

2.5 T3 5/32 3,97

3 04 3/16 4,76

3.5 05 7/32 5,56

4 06 1/4 6,35

5 07 5/16 7,94

6 09 3/8 9,52

7 11 7/16 11,11

8 12 1/2 12,70

04 010 .004 0,01

08 020 .008 0,02

10 10°

15 15°

20 20°

25 25°

30 30°

symbol size

D two-sided mini tipM mini tip

MT multi tip

symbol usage

Turning and Boring Insert Identification System

▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫

6.Thickness

7.Corner Radius

9 & 10.Cutting Edge Condition or Chip Control Features (optional)

11, 12, & 13.T-Land Width (optional)

8.Hand of Insert(optional)

14 & 15.T-Land Angle(optional)

16.Tip Style(optional)

symbol corner radius

inch metric inch mm

class “U” tolerance

34

®Kenloc Inserts

CNGA-(S)

CNGG-LF

CNGP

CNMA

CNMG-FF

CNGA-432* CNGA 12 04 08* 1/2 3/16 1/32 .1216 .203 � �CNGA-433* CNGA 12 04 12* 1/2 3/16 3/64 .1129 .203 � �

CNGG-430LF CNGG 12 04 01LF 1/2 3/16 .004 .1367 .203 � � �CNGG-430.5LF CNGG 12 04 02LF 1/2 3/16 .008 .1345 .203 � � �CNGG-431LF CNGG 12 04 04LF 1/2 3/16 1/64 .1302 .203 � � �CNGG-432LF CNGG 12 04 08LF 1/2 3/16 1/32 .1216 .203 � � �CNGG-433LF CNGG 12 04 12LF 1/2 3/16 3/64 .1129 .203 � � �

CNGP-430 CNGP 12 04 01 1/2 3/16 .004 .1367 .203 � � �CNGP-430.5 CNGP 12 04 02 1/2 3/16 .008 .1345 .203 � � �CNGP-431 CNGP 12 04 04 1/2 3/16 1/64 .1302 .203 � � � �CNGP-432 CNGP 12 04 08 1/2 3/16 1/32 .1216 .203 � � � �CNGP-433 CNGP 12 04 12 1/2 3/16 3/64 .1129 .203 � � � �CNGP-434 CNGP 12 04 16 1/2 3/16 1/16 .1042 .203 � � � �

CNMA-432 CNMA 12 04 08 1/2 3/16 1/32 .1216 .203 � �CNMA-433 CNMA 12 04 12 1/2 3/16 3/64 .1129 .203 � �

CNMG-321FF CNMG 09 03 04FF 3/8 1/8 1/64 .0955 .150 � � � � �CNMG-322FF CNMG 09 03 08FF 3/8 1/8 1/32 .0868 .150 � � � � �

CNMG-431FF CNMG 12 04 04FF 1/2 3/16 1/64 .1302 .203 � � � � �CNMG-432FF CNMG 12 04 08FF 1/2 3/16 1/32 .1216 .203 � � � � �

dimensions

d s rε m d1

insertcatalog number

ISOcatalog number K

313

KC

730

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9040

KC

9215

KC

9225

KC

9240

KC

9245

KT3

15

KD

100

grades


ISOcatalog number

grades

*Available in coated carbide and single-tipped PCD grade KD100.

35

Kenloc Inserts

CNMG-FN

CNMG-FP

CNMG-FW

CNMG-MN

CNMG-MP

CNMG-321FN CNMG 09 03 04FN 3/8 1/8 1/64 .0955 .150 � � �CNMG-322FN CNMG 09 03 08FN 3/8 1/8 1/32 .0868 .150 � � �

CNMG-430.5FN CNMG 12 04 02FN 1/2 3/16 .008 .1345 .203 � �CNMG-431FN CNMG 12 04 04FN 1/2 3/16 1/64 .1302 .203 � � �CNMG-432FN CNMG 12 04 08FN 1/2 3/16 1/32 .1216 .203 � � �CNMG-433FN CNMG 12 04 12FN 1/2 3/16 3/64 .1129 .203 � � �CNMG-434FN CNMG 12 04 16FN 1/2 3/16 1/16 .1042 .203 � � �

CNMG-431FP CNMG 12 04 04FP 1/2 3/16 1/64 .1302 .203 � � � �CNMG-432FP CNMG 12 04 08FP 1/2 3/16 1/32 .1216 .203 � � � �CNMG-433FP CNMG 12 04 12FP 1/2 3/16 3/64 .1129 .203 � � � �

CNMG-431FW CNMG 12 04 04FW 1/2 3/16 1/64 .1259 .203 � � � � �CNMG-432FW CNMG 12 04 08FW 1/2 3/16 1/32 .1176 .203 � � � � �CNMG-433FW CNMG 12 04 12FW 1/2 3/16 3/64 .1093 .203 � � � � �

CNMG-321MN CNMG 09 03 04MN 3/8 1/8 1/64 .0955 .150 � � � �CNMG-322MN CNMG 09 03 08MN 3/8 1/8 1/32 .0868 .150 � � � �CNMG-323MN CNMG 09 03 12MN 3/8 1/8 3/64 .0781 .150 � � � �

CNMG-431MN CNMG 12 04 04MN 1/2 3/16 1/64 .1302 .203 � � � �CNMG-432MN CNMG 12 04 08MN 1/2 3/16 1/32 .1216 .203 � � � �CNMG-433MN CNMG 12 04 12MN 1/2 3/16 3/64 .1129 .203 � � � �CNMG-434MN CNMG 12 04 16MN 1/2 3/16 1/16 .1042 .203 � � � �

CNMG-322MP CNMG 09 03 08MP 3/8 1/8 1/32 .0868 .150 � � � � �

CNMG-431MP CNMG 12 04 04MP 1/2 3/16 1/64 .1302 .203 � � � � � �CNMG-432MP CNMG 12 04 08MP 1/2 3/16 1/32 .1216 .203 � � � � � �CNMG-433MP CNMG 12 04 12MP 1/2 3/16 3/64 .1129 .203 � � � � � �CNMG-434MP CNMG 12 04 16MP 1/2 3/16 1/16 .1042 .203 � � � � � �

dimensions

d s rε m d1


ISOcatalog number K

313

KC

730

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9040

KC

9215

KC

9225

KC

9240

KC

9245

KT3

15

KD

100

grades

36

®Kenloc Inserts

CNMG-MW

CNMS(-F)

DNGA(-S)

DNGG-LF

DNGP

CNMG-432MW CNMG 12 04 08MW 1/2 3/16 1/32 .1176 .203 � � � � � �CNMG-433MW CNMG 12 04 12MW 1/2 3/16 3/64 .1093 .203 � � � � � �

CNMS-432 CNMS 12 04 08 1/2 3/16 1/32 .1216 .203 � �CNMS-432F* CNMS 12 04 08F* 1/2 3/16 1/32 .1216 .203 �

DNGA-432* DNGA 15 04 08* 1/2 3/16 1/32 .2550 .203 �DNGA-433* DNGA 15 04 12* 1/2 3/16 3/64 .2368 .203 �

DNGG-430.5LF DNGG 15 04 02LF 1/2 3/16 .008 .2821 .203 � � �DNGG-431LF DNGG 15 04 04LF 1/2 3/16 1/64 .2732 .203 � � �DNGG-432LF DNGG 15 04 08LF 1/2 3/16 1/32 .2550 .203 � � �

DNGP-331 DNGP 11 04 04 3/8 3/16 1/64 .2004 .150 �

DNGP-430 DNGP 15 04 01 1/2 3/16 .004 .2868 .203 � � �DNGP-430.5 DNGP 15 04 02 1/2 3/16 .008 .2821 .203 � � �DNGP-431 DNGP 15 04 04 1/2 3/16 1/64 .2732 .203 � � � �DNGP-432 DNGP 15 04 08 1/2 3/16 1/32 .2550 .203 � � � �DNGP-441 DNGP 15 06 04 1/2 1/4 1/64 .2732 .203 � � �DNGP-442 DNGP 15 06 08 1/2 1/4 1/32 .2550 .203 � � �DNGP-443 DNGP 15 08 12 1/2 1/4 3/64 .2368 .203 �

dimensions

d s rε m d1


ISOcatalog number K

313

KC

730

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9040

KC

9215

KC

9225

KC

9240

KC

9245

KT3

15

KD

100

grades

*Grade KD100 is a single-tipped PCD insert.

†D+T style wiper inserts do not produce true corner radii — see wiper section for details, page 16.

37

Kenloc Inserts

DNMG-FF

DNMG-FN

DNMG-FP

DNMG-FW

DNMG-MN

DNMG-331FF DNMG 11 04 04FF 3/8 3/16 1/64 .2004 .150 � � � � �DNMG-332FF DNMG 11 04 08FF 3/8 3/16 1/32 .1821 .150 � � � � �

DNMG-431FF DNMG 15 04 04FF 1/2 3/16 1/64 .2732 .203 � � � � �DNMG-432FF DNMG 15 04 08FF 1/2 3/16 1/32 .2550 .203 � � � � �DNMG-441FF DNMG 15 06 04FF 1/2 1/4 1/64 .2732 .203 � � � � �DNMG-442FF DNMG 15 06 08FF 1/2 1/4 1/32 .2550 .203 � � � � �

DNMG-331FN DNMG 11 04 04FN 3/8 3/16 1/64 .2004 .150 � � �DNMG-332FN DNMG 11 04 08FN 3/8 3/16 1/32 .1821 .150 � � �DNMG-333FN DNMG 11 04 12FN 3/8 3/16 3/64 .1639 .150 � � �

DNMG-431FN DNMG 15 04 04FN 1/2 3/16 1/64 .2732 .203 � � �DNMG-432FN DNMG 15 04 08FN 1/2 3/16 1/32 .2550 .203 � � �DNMG-433FN DNMG 15 04 12FN 1/2 3/16 3/64 .2368 .203 � � �DNMG-441FN DNMG 15 06 04FN 1/2 1/4 1/64 .2732 .203 � � �DNMG-442FN DNMG 15 06 08FN 1/2 1/4 1/32 .2550 .203 � � �DNMG-443FN DNMG 15 06 12FN 1/2 1/4 3/64 .2368 .203 � � �

DNMG-331FP DNMG 11 04 04FP 3/8 3/16 1/64 .2004 .150 � � � �DNMG-332FP DNMG 11 04 08FP 3/8 3/16 1/32 .1821 .150 � � � �

DNMG-431FP DNMG 15 04 04FP 1/2 3/16 1/64 .2732 .203 � � � �DNMG-432FP DNMG 15 04 08FP 1/2 3/16 1/32 .2550 .203 � � � �DNMG-433FP DNMG 15 04 12FP 1/2 3/16 3/64 .2368 .203 � � � �DNMG-441FP DNMG 15 06 04FP 1/2 1/4 1/64 .2732 .203 � � � �DNMG-442FP DNMG 15 06 08FP 1/2 1/4 1/32 .2550 .203 � � � �DNMG-443FP DNMG 15 06 12FP 1/2 1/4 3/64 .2368 .203 � � � �

DNMG-331FW DNMG 11 04 04FW 3/8 3/16 1/64† .1977 .150 � � � � �DNMG-332FW DNMG 11 04 08FW 3/8 3/16 1/32† .1790 .150 � � � � �

DNMG-431FW DNMG 15 04 04FW 1/2 3/16 1/64† .2705 .203 � � � � �DNMG-432FW DNMG 15 04 08FW 1/2 3/16 1/32† .2518 .203 � � � � �DNMG-441FW DNMG 15 06 04FW 1/2 1/4 1/64† .2705 .203 � � � � �DNMG-442FW DNMG 15 06 08FW 1/2 1/4 1/32† .2518 .203 � � � � �

DNMG-331MN DNMG 11 04 04MN 3/8 3/16 1/64 .2004 .150 � � � �DNMG-332MN DNMG 11 04 08MN 3/8 3/16 1/32 .1821 .150 � � � �DNMG-333MN DNMG 11 04 12MN 3/8 3/16 3/64 .1639 .150 � � � �

DNMG-431MN DNMG 15 04 04MN 1/2 3/16 1/64 .2732 .203 � � � �DNMG-432MN DNMG 15 04 08MN 1/2 3/16 1/32 .2550 .203 � � � �DNMG-433MN DNMG 15 04 12MN 1/2 3/16 3/64 .2368 .203 � � � �DNMG-434MN DNMG 15 04 16MN 1/2 3/16 1/16 .2186 .203 � � � �DNMG-441MN DNMG 15 06 04MN 1/2 1/4 1/64 .2732 .203 � � � �DNMG-442MN DNMG 15 06 08MN 1/2 1/4 1/32 .2550 .203 � � � �DNMG-443MN DNMG 15 06 12MN 1/2 1/4 3/64 .2368 .203 � � � �DNMG-444MN DNMG 15 06 16MN 1/2 1/4 1/16 .2186 .203 � � � �

dimensions

d s rε m d1


ISOcatalog number K

313

KC

730

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9040

KC

9215

KC

9225

KC

9240

KC

9245

KT3

15

KD

100

grades

®Kenloc Inserts

DNMG-MP

DNMG-MW

DNMS(-F)

SNGG-LF

SNGP

DNMG-331MP DNMG 11 04 04MP 3/8 3/16 1/64 .2004 .150 �DNMG-332MP DNMG 11 04 08MP 3/8 3/16 1/32 .1821 .150 � � � � � �DNMG-333MP DNMG 11 04 12MP 3/8 3/16 3/64 .1639 .150 � � � � � �

DNMG-431MP DNMG 15 04 04MP 1/2 3/16 1/64 .2732 .203 � � � � � �DNMG-432MP DNMG 15 04 08MP 1/2 3/16 1/32 .2550 .203 � � � � � �DNMG-433MP DNMG 15 04 12MP 1/2 3/16 3/64 .2368 .203 � � � � � �DNMG-441MP DNMG 15 06 04MP 1/2 1/4 1/64 .2732 .203 � � � � � �DNMG-442MP DNMG 15 06 08MP 1/2 1/4 1/32 .2550 .203 � � � � � �DNMG-443MP DNMG 15 06 12MP 1/2 1/4 3/64 .2368 .203 � � � � � �

DNMG-432MW DNMG 15 04 08MW 1/2 3/16 1/32† .2519 .203 � � � � � �DNMG-433MW DNMG 15 04 12MW 1/2 3/16 3/64† .2355 .203 � � � � � �DNMG-442MW DNMG 15 06 08MW 1/2 1/4 1/32† .2519 .203 � � � � � �DNMG-443MW DNMG 15 06 12MW 1/2 1/4 3/64† .2355 .203 � � � � � �

DNMS-432 DNMS 15 04 08 1/2 3/16 1/32 .2550 .203 � �DNMS-432F* DNMS 15 04 08F* 1/2 3/16 1/32 .2550 .203 �

SNGG-322LF SNGG 09 03 08LF 3/8 1/8 1/32 .0647 .150 � � �

SNGG-432LF SNGG 12 04 08LF 1/2 3/16 1/32 .0906 .203 � �

SNGP-431 SNGP 12 04 04 1/2 3/16 1/64 .0971 .203 � �SNGP-432 SNGP 12 04 08 1/2 3/16 1/32 .0906 .203 � � �

dimensions

d s rε m d1


ISOcatalog number K

313

KC

730

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9040

KC

9215

KC

9225

KC

9240

KC

9245

KT3

15

KD

100

grades

†D+T style wiper inserts do not produce true corner radii — see wiper section for details, page 16.*Grade KD100 is a single-tipped PCD insert.

38

39

Kenloc Inserts

SNMG-FF

SNMG-FN

SNMG-FP

SNMG-FW

SNMG-MN

SNMG-321FF SNMG 09 03 04FF 3/8 1/8 1/64 .0712 .150 � � � �SNMG-322FF SNMG 09 03 08FF 3/8 1/8 1/32 .0647 .150 � � � �

SNMG-431FF SNMG 12 04 04FF 1/2 3/16 1/64 .0971 .203 � � � �SNMG-432FF SNMG 12 04 08FF 1/2 3/16 1/32 .0906 .203 � � � �

SNMG-321FN SNMG 09 03 04FN 3/8 1/8 1/64 .0712 .150 � � �SNMG-322FN SNMG 09 03 08FN 3/8 1/8 1/32 .0647 .150 � � �

SNMG-431FN SNMG 12 04 04FN 1/2 3/16 1/64 .0971 .203 � � �SNMG-432FN SNMG 12 04 08FN 1/2 3/16 1/32 .0906 .203 � � �SNMG-433FN SNMG 12 04 12FN 1/2 3/16 3/64 .0841 .203 � � �SNMG-434FN SNMG 12 04 16FN 1/2 3/16 1/16 .0777 .203 � � �

SNMG-431FP SNMG 12 04 04FP 1/2 3/16 1/64 .0971 .203 � � � �SNMG-432FP SNMG 12 04 08FP 1/2 3/16 1/32 .0906 .203 � � � �SNMG-433FP SNMG 12 04 12FP 1/2 3/16 3/64 .0841 .203 � � � �

SNMG-432FW SNMG 12 04 08FW 1/2 3/16 1/32 .0803 .203 � �SNMG-433FW SNMG 12 04 12FW 1/2 3/16 3/64 .0742 .203 � �

SNMG-321MN SNMG 09 03 04MN 3/8 1/8 1/64 .0712 .150 � � � �SNMG-322MN SNMG 09 03 08MN 3/8 1/8 1/32 .0647 .150 � � � �SNMG-323MN SNMG 09 03 12MN 3/8 1/8 3/64 .0582 .150 � � � �

SNMG-431MN SNMG 12 04 04MN 1/2 3/16 1/64 .0971 .203 � � � �SNMG-432MN SNMG 12 04 08MN 1/2 3/16 1/32 .0906 .203 � � � �SNMG-433MN SNMG 12 04 12MN 1/2 3/16 3/64 .0841 .203 � � � �SNMG-434MN SNMG 12 04 16MN 1/2 3/16 1/16 .0777 .203 � � � �

dimensions

d s rε m d1


ISOcatalog number K

313

KC

730

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9040

KC

9215

KC

9225

KC

9240

KC

9245

KT3

15

KD

100

grades

40

®Kenloc Inserts

SNMG-MP

SNMG-MW

SNMS(-F)

TNGG-LF

TNGP

SNMG-432MP SNMG 12 04 08MP 1/2 3/16 1/32 .0906 .203 � � � � � �SNMG-433MP SNMG 12 04 12MP 1/2 3/16 3/64 .0841 .203 � � � � � �SNMG-434MP SNMG 12 04 16MP 1/2 3/16 1/16 .0777 .203 � � � � � �

SNMG-432MW SNMG 12 04 08MW 1/2 3/16 1/32 .0803 .203 � �SNMG-433MW SNMG 12 04 12MW 1/2 3/16 3/64 .0742 .203 � �

SNMS-432 SNMS 12 04 08 1/2 3/16 1/32 .0906 .203 � �SNMS-432F* SNMS 12 04 08F* 1/2 3/16 1/32 .0906 .203 �SNMS-433 SNMS 12 04 12 1/2 3/16 3/64 .0841 .203 � �SNMS-433F* SNMS 12 04 12F* 1/2 3/16 3/64 .0841 .203 �

TNGG-330.5LF TNGG 16 04 02LF 3/8 3/16 .008 .5545 .150 � � �TNGG-331LF TNGG 16 04 04LF 3/8 3/16 1/64 .5469 .150 � �TNGG-332LF TNGG 16 04 08LF 3/8 3/16 1/32 .5313 .150 � � �

TNGP-330.5 TNGP 16 04 02 3/8 3/16 .008 .5545 .150 � � �TNGP-331 TNGP 16 04 04 3/8 3/16 1/64 .5469 .150 � � �TNGP-332 TNGP 16 04 08 3/8 3/16 1/32 .5313 .150 � � �

dimensions

d s rε m d1


ISOcatalog number K

313

KC

730

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9040

KC

9215

KC

9225

KC

9240

KC

9245

KT3

15

KD

100

grades


41

Kenloc Inserts

TNMG-FF

TNMG-FN

TNMG-FP

TNMG-FW

TNMG-221FF TNMG 11 03 04FF 1/4 1/8 1/64 .3594 .091 � � � � �TNMG-222FF TNMG 11 03 08FF 1/4 1/8 1/32 .3438 .091 � � � � �

TNMG-331FF TNMG 16 04 04FF 3/8 3/16 1/64 .5469 .150 � � � � �TNMG-332FF TNMG 16 04 08FF 3/8 3/16 1/32 .5313 .150 � � � � �

TNMG-331FN TNMG 16 04 04FN 3/8 3/16 1/64 .5469 .150 � � �TNMG-332FN TNMG 16 04 08FN 3/8 3/16 1/32 .5313 .150 � � �TNMG-333FN TNMG 16 04 12FN 3/8 3/16 3/64 .5156 .150 � � �

TNMG-431FN TNMG 22 04 04FN 1/2 3/16 1/64 .7344 .203 � � �

TNMG-331FP TNMG 16 04 04FP 3/8 3/16 1/64 .5469 .150 � � � �TNMG-332FP TNMG 16 04 08FP 3/8 3/16 1/32 .5313 .150 � � � �TNMG-333FP TNMG 16 04 12FP 3/8 3/16 3/64 .5156 .150 � � � �

TNMG-431FP TNMG 22 04 04FP 1/2 3/16 1/64 .7344 .203 � � � �

TNMG-331FW TNMG 16 04 04FW 3/8 3/16 1/64† .5456 .150 � � � � �TNMG-332FW TNMG 16 04 08FW 3/8 3/16 1/32† .5300 .150 � � � � �TNMG-333FW TNMG 16 04 12FW 3/8 3/16 3/64† .5160 .150 � � � �

dimensions

d s rε m d1


ISOcatalog number K

313

KC

730

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9040

KC

9215

KC

9225

KC

9240

KC

9245

KT3

15

KD

100

grades

†D+T style wiper inserts do not produce true corner radii — see wiper section for details, page 16.

42

®Kenloc Inserts

TNMG-MN

TNMG-MP

TNMG-MW

TNMS(-F)

TNMG-331MN TNMG 16 04 04MN 3/8 3/16 1/64 .5469 .150 � � � �TNMG-332MN TNMG 16 04 08MN 3/8 3/16 1/32 .5313 .150 � � � �TNMG-333MN TNMG 16 04 12MN 3/8 3/16 3/64 .5156 .150 � � � �

TNMG-431MN TNMG 22 04 04MN 1/2 3/16 1/64 .7344 .203 � � � �TNMG-432MN TNMG 22 04 08MN 1/2 3/16 1/32 .7188 .203 � � � �TNMG-433MN TNMG 22 04 12MN 1/2 3/16 3/64 .7031 .203 � � � �TNMG-434MN TNMG 22 04 16MN 1/2 3/16 1/16 .6875 .203 � � � �

TNMG-331MP TNMG 16 04 04MP 3/8 3/16 1/64 .5469 .150 � � � � � �TNMG-332MP TNMG 16 04 08MP 3/8 3/16 1/32 .5313 .150 � � � � � �TNMG-333MP TNMG 16 04 12MP 3/8 3/16 3/64 .5156 .150 � � � � � �

TNMG-432MP TNMG 22 04 08MP 1/2 3/16 1/32 .7188 .203 � � � � � �TNMG-433MP TNMG 22 04 12MP 1/2 3/16 3/64 .7031 .203 � � � � � �TNMG-434MP TNMG 22 04 16MP 1/2 3/16 1/16 .6875 .203 � � � � � �

TNMG-332MW TNMG 16 04 08MW 3/8 3/16 1/32† .5300 .150 � � �TNMG-333MW TNMG 16 04 12MW 3/8 3/16 3/64† .5160 .150 � � �

TNMS-331 TNMS 16 04 04 3/8 3/16 1/64 .5469 .150 � �TNMS-331F* TNMS 16 04 04F* 3/8 3/16 1/64 .5469 .150 �TNMS-332 TNMS 16 04 08 3/8 3/16 1/32 .5313 .150 � �TNMS-332F* TNMS 16 04 08F* 3/8 3/16 1/32 .5313 .150 �

TNMS-431 TNMS 22 04 04 1/2 3/16 1/64 .7344 .203 � �TNMS-431F* TNMS 22 04 04F* 1/2 3/16 1/64 .7344 .203 �TNMS-432 TNMS 22 04 08 1/2 3/16 1/32 .7188 .203 � �TNMS-432F* TNMS 22 04 08F* 1/2 3/16 1/32 .7188 .203 �TNMS-433F* TNMS 22 04 12F* 1/2 3/16 3/64 .7031 .203 �

dimensions

d s rε m d1


ISOcatalog number K

313

KC

730

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9040

KC

9215

KC

9225

KC

9240

KT3

15

KD

100

grades

†D+T style wiper inserts do not produce true corner radii — see wiper section for details, page 16.*Grade KD100 is a single-tipped PCD insert.

KC

9245

43

Kenloc Inserts

WNGG-430LF WNGG 08 04 01LF 1/2 3/16 .004 .1367 .203 .342 �WNGG-430.5LF WNGG 08 04 02LF 1/2 3/16 .008 .1345 .203 .342 �WNGG-431LF WNGG 08 04 04LF 1/2 3/16 1/64 .1302 .203 .342 �WNGG-432LF WNGG 08 04 08LF 1/2 3/16 1/32 .1216 .203 .342 �

WNMG-331FF WNMG 06 04 04FF 3/8 3/16 1/64 .0955 .150 .257 � � � � �WNMG-332FF WNMG 06 04 08FF 3/8 3/16 1/32 .0868 .150 .257 � � � � �

WNMG-431FF WNMG 08 04 04FF 1/2 3/16 1/64 .1302 .203 .342 � � � � �WNMG-432FF WNMG 08 04 08FF 1/2 3/16 1/32 .1216 .203 .342 � � � � �

WNMG-331FN WNMG 06 04 04FN 3/8 3/16 1/64 .0955 .150 .257 � � �WNMG-332FN WNMG 06 04 08FN 3/8 3/16 1/32 .0868 .150 .257 � � �

WNMG-431FN WNMG 08 04 04FN 1/2 3/16 1/64 .1302 .203 .342 � � �WNMG-432FN WNMG 08 04 08FN 1/2 3/16 1/32 .1216 .203 .342 � � �WNMG-433FN WNMG 08 04 12FN 1/2 3/16 3/64 .1129 .203 .342 � � �WNMG-434FN WNMG 08 04 16FN 1/2 3/16 1/16 .1042 .203 .342 � � �

WNMG-331FP WNMG 06 04 04FP 3/8 3/16 1/64 .0955 .150 .257 � � � �WNMG-332FP WNMG 06 04 08FP 3/8 3/16 1/32 .0868 .150 .257 � � � �

WNMG-431FP WNMG 08 04 04FP 1/2 3/16 1/64 .1302 .203 .342 � � � �WNMG-432FP WNMG 08 04 08FP 1/2 3/16 1/32 .1216 .203 .342 � � � �WNMG-433FP WNMG 08 04 12FP 1/2 3/16 3/64 .1129 .203 .342 � � � �

WNMG-331FW WNMG 06 04 04FW 3/8 3/16 1/64 .0923 .150 .257 � � � � �WNMG-332FW WNMG 06 04 08FW 3/8 3/16 1/32 .0840 .150 .257 � � � � �WNMG-333FW WNMG 06 04 12FW 3/8 3/16 3/64 .0757 .150 .257 � � � �

WNMG-431FW WNMG 08 04 04FW 1/2 3/16 1/64 .1259 .203 .342 � � � � �WNMG-432FW WNMG 08 04 08FW 1/2 3/16 1/32 .1176 .203 .342 � � � � �WNMG-433FW WNMG 08 04 12FW 1/2 3/16 3/64 .1093 .203 .342 � � � � �

dimensions

d s rε m d1 l


ISOcatalog number K

313

KC

730

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9040

KC

9215

KC

9225

KC

9240

KC

9245

KT3

15

KD

100

grades

WNGG-LF

WNMG-FF

WNMG-FN

WNMG-FP

WNMG-FW

44

®Kenloc Inserts

WNMG-331MN WNMG 06 04 04MN 3/8 3/16 1/64 .0955 .150 .257 � � � �WNMG-332MN WNMG 06 04 08MN 3/8 3/16 1/32 .0868 .150 .257 � � � �WNMG-333MN WNMG 06 04 12MN 3/8 3/16 3/64 .0781 .150 .257 � � � �

WNMG-432MN WNMG 08 04 08MN 1/2 3/16 1/32 .1216 .203 .342 � � � �WNMG-433MN WNMG 08 04 12MN 1/2 3/16 3/64 .1129 .203 .342 � � � �WNMG-434MN WNMG 08 04 16MN 1/2 3/16 1/16 .1042 .203 .342 � � � �

dimensions

d s rε m d1 l


ISOcatalog number K

313

KC

730

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9040

KC

9215

KC

9225

KC

9240

KC

9245

KT3

15

KD

100

grades

WNMG-MN

WNMG-331MP WNMG 06 04 04MP 3/8 3/16 1/64 .0955 .150 .257 � � � � � �WNMG-332MP WNMG 06 04 08MP 3/8 3/16 1/32 .0868 .150 .257 � � � � � �WNMG-333MP WNMG 06 04 12MP 3/8 3/16 3/64 .0781 .150 .257 � � � � � �

WNMG-432MP WNMG 08 04 08MP 1/2 3/16 1/32 .1216 .203 .342 � � � � � �WNMG-433MP WNMG 08 04 12MP 1/2 3/16 3/64 .1129 .203 .342 � � � � � �

WNMG-MP

WNMG-332MW WNMG 06 04 08MW 3/8 3/16 1/32 .0840 .150 .257 � � � � � �WNMG-333MW WNMG 06 04 12MW 3/8 3/16 3/64 .0757 .150 .257 � � � � � �

WNMG-432MW WNMG 08 04 08MW 1/2 3/16 1/32 .1176 .203 .342 � � � � � �WNMG-433MW WNMG 08 04 12MW 1/2 3/16 3/64 .1093 .203 .342 � � � � � �

WNMG-MW

45

Screw-On Inserts

grades

dimensions

d s rε m d1


ISOcatalog number K

C73

0

K31

3

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9225

KC

9240

KC

9315

KT3

15

KD

100

CCGT-HP CCGT-21.50.5HP CCGT 06 02 02HP 1/4 3/32 .008 .0650 .110 � � � � �CCGT-21.51HP CCGT 06 02 04HP 1/4 3/32 1/64 .0608 .110 � � � � �CCGT-21.52HP CCGT 06 02 08HP 1/4 3/32 1/32 .0521 .110 � � �

CCGT-32.50.5HP CCGT 09 T3 02HP 3/8 5/32 .008 .0998 .173 � � � � �CCGT-32.51HP CCGT 09 T3 04HP 3/8 5/32 1/64 .0955 .173 � � � � �CCGT-32.52HP CCGT 09 T3 08HP 3/8 5/32 1/32 .0868 .173 � � �

CCGT-430HP CCGT 12 04 01HP 1/2 3/16 .004 .1367 .217 � � �CCGT-430.5HP CCGT 12 04 02HP 1/2 3/16 .008 .1345 .217 � � �CCGT-431HP CCGT 12 04 04HP 1/2 3/16 1/64 .1302 .217 � � � � �CCGT-432HP CCGT 12 04 08HP 1/2 3/16 1/32 .1216 .217 � � � � �

CCGT-LF CCGT-21.5X.0LF CCGT 06 02 X0LF 1/4 3/32 .0015 .0686 .110 �CCGT-21.50LF CCGT 06 02 01LF 1/4 3/32 .004 .0672 .110 � � � � �CCGT-21.50.5LF CCGT 06 02 02LF 1/4 3/32 .008 .0650 .110 � � � � �CCGT-21.51LF CCGT 06 02 04LF 1/4 3/32 1/64 .0608 .110 � � � � �CCGT-21.52LF CCGT 06 02 08LF 1/4 3/32 1/32 .0521 .110 � � � � �

CCGT-32.5X.0LF CCGT 09 T3 X.0LF 3/8 5/32 .0015 .1034 .173 �CCGT-32.50LF CCGT 09 T3 01LF 3/8 5/32 .004 .1020 .173 � � � � �CCGT-32.50.5LF CCGT 09 T3 02LF 3/8 5/32 .008 .0998 .173 � � � � �CCGT-32.51LF CCGT 09 T3 04LF 3/8 5/32 1/64 .0955 .173 � � � � �CCGT-32.52LF CCGT 09 T3 08LF 3/8 5/32 1/32 .0868 .173 � � � � �

CCMT-11 CCMT-21.51-11 CCMT 06 02 0411 1/4 3/32 1/64 .0608 .110 �

CCMT-32.51-11 CCMT 09 T3 0411 3/8 5/32 1/64 .0955 .173 �CCMT-32.52-11 CCMT 09 T3 0811 3/8 5/32 1/32 .0868 .173 �

CCMT-431-11 CCMT 12 04 0411 1/2 3/16 1/64 .1302 .217 �CCMT-432-11 CCMT 12 04 0811 1/2 3/16 1/32 .1216 .217 �

CCMT-FW CCMT-21.50.5FW CCMT 06 02 02FW 1/4 3/32 .008 .0631 .110 � �CCMT-21.51FW CCMT 06 02 04FW 1/4 3/32 1/64 .0590 .110 � � � �CCMT-21.52FW CCMT 06 02 08FW 1/4 3/32 1/32 .0507 .110 � � � �

CCMT-32.51FW CCMT 09 T3 04FW 3/8 5/32 1/64 .0923 .173 � � � �CCMT-32.52FW CCMT 09 T3 08FW 3/8 5/32 1/32 .0840 .173 � � � �

CCMT-LF CCMT-21.50.5LF CCMT 06 02 02LF 1/4 3/32 .008 .0650 .110 � � � �CCMT-21.51LF CCMT 06 02 04LF 1/4 3/32 1/64 .0608 .110 � � � � � � � � �CCMT-21.52LF CCMT 06 02 08LF 1/4 3/32 1/32 .0521 .110 � � � � � � � �

CCMT-32.50.5LF CCMT 09 T3 02LF 3/8 5/32 .008 .0998 .173 � � � �CCMT-32.51LF CCMT 09 T3 04LF 3/8 5/32 1/64 .0955 .173 � � � � � � � � �CCMT-32.52LF CCMT 09 T3 08LF 3/8 5/32 1/32 .0868 .173 � � � � � � � � �

CCMT-431LF CCMT 12 04 04LF 1/2 3/16 1/64 .1302 .217 � � � � � � � �CCMT-432LF CCMT 12 04 08LF 1/2 3/16 1/32 .1216 .217 � � � � � � � �CCMT-433LF CCMT 12 04 12LF 1/2 3/16 3/64 .1129 .217 � � � � � �

grades

dimensions

d s rε m d1 KC

730

K31

3

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9225

KC

9240

KC

9315

KT3

15

KD

100

CCMT-MF

CCMT-MW

CCMT-UF

CCMW(-F)

CDHB

46

®Screw-On Inserts


ISOcatalog number

CCMT-21.51MF CCMT 06 02 04MF 1/4 3/32 1/64 .0608 .110 � � � � � �

CCMT-32.51MF CCMT 09 T3 04MF 3/8 5/32 1/64 .0955 .173 � � � � � �CCMT-32.52MF CCMT 09 T3 08MF 3/8 5/32 1/32 .0868 .173 � � � � � �CCMT-32.53MF CCMT 09 T3 12MF 3/8 5/32 3/64 .0781 .173 � � � � �

CCMT-432MF CCMT 12 04 08MF 1/2 3/16 1/32 .1216 .217 � � � � � �

CCMT-32.51MW CCMT 09 T3 04MW 3/8 5/32 1/64 .0923 .173 � � � � �CCMT-32.52MW CCMT 09 T3 08MW 3/8 5/32 1/32 .0840 .173 � � � � �

CCMT-431MW CCMT 12 04 04MW 1/2 3/16 1/64 .1259 .217 � � � � �CCMT-432MW CCMT 12 04 08MW 1/2 3/16 1/32 .1176 .217 � � � � �

CCMT-21.51UF CCMT 06 02 04UF 1/4 3/32 1/64 .0608 .110 � � � �

CCMT-32.50.5UF CCMT 09 T3 02UF 3/8 5/32 .008 .0998 .173 � � � �CCMT-32.51UF CCMT 09 T3 04UF 3/8 5/32 1/64 .0955 .173 � � � �CCMT-32.52UF CCMT 09 T3 08UF 3/8 5/32 1/32 .0868 .173 � � � �

CCMW-32.51F* CCMW 09 T3 04F* 3/8 5/32 1/64 .0955 .173 �

CDHB-1.20.60.1** CDHB S4 T0 00** 5/32 .040 .002 .0434 .083 � �CDHB-1.20.60.5 CDHB S4 T0 02 5/32 .040 .008 .0390 .083 � �CDHB-1.20.61** CDHB S4 T0 04** 5/32 .040 1/64 .0347 .083 � � �

*Grade KD100 is a single-tipped PCD insert.**Available in coated carbide and single-tipped PCD grade KD100.

47

Screw-On Inserts

grades

dimensions

d s rε m d1


ISOcatalog number K

313

KC

730

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9225

KC

9240

KT3

15

KD

100

CPGB(-F) CPGB-32.50.5F* CPGB 09 T3 02F* 3/8 5/32 .008 .0998 .173 �CPGB-32.51F* CPGB 09 T3 04F* 3/8 5/32 1/64 .0955 .173 �CPGB-32.52F* CPGB 09 T3 08F* 3/8 5/32 1/32 .0868 .173 �

CPGM(-F) CPGM-32.50* CPGH 09 T3 01* 3/8 5/32 .004 .1020 .173 � � � �CPGM-32.50.5* CPGH 09 T3 02* 3/8 5/32 .008 .0998 .173 � � � � �CPGM-32.50.5F* CPGH 09 T3 02F* 3/8 5/32 .008 .0998 .173 �CPGM-32.51* CPGH 09 T3 04* 3/8 5/32 1/64 .0955 .173 � � � � � � � � � �CPGM-32.51F* CPGH 09 T3 04F* 3/8 5/32 1/64 .0955 .173 �CPGM-32.52* CPGH 09 T3 08* 3/8 5/32 1/32 .0868 .173 � � � � � � � � � � �CPGM-32.52F* CPGH 09 T3 08F* 3/8 5/32 1/32 .0868 .173 �

CPGT-HP CPGT-21.50.5HP CPGT 06 02 02HP 1/4 3/32 .008 .0650 .110 � � � �CPGT-21.51HP CPGT 06 02 04HP 1/4 3/32 1/64 .0608 .110 � � � �CPGT-21.52HP CPGT 06 02 08HP 1/4 3/32 1/32 .0521 .110 � � �

CPGT-32.50.5HP CPGT 09 T3 02HP 3/8 5/32 .008 .0998 .173 � � � � �CPGT-32.51HP CPGT 09 T3 04HP 3/8 5/32 1/64 .0955 .173 � � � � �CPGT-32.52HP CPGT 09 T3 08HP 3/8 5/32 1/32 .0868 .173 � � �

CPGT-LF CPGT-21.50LF CPGT 06 02 01LF 1/4 3/32 .004 .0672 .110 � � � � �CPGT-21.50.5LF CPGT 06 02 02LF 1/4 3/32 .008 .0650 .110 � � � �CPGT-21.51LF CPGT 06 02 04LF 1/4 3/32 1/64 .0608 .110 � � � � �CPGT-21.52LF CPGT 06 02 08LF 1/4 3/32 1/32 .0521 .110 � � �

CPGT-32.50.5LF CPGT 09 T3 02LF 3/8 5/32 .008 .0998 .173 � � � � �CPGT-32.51LF CPGT 09 T3 04LF 3/8 5/32 1/64 .0955 .173 � � � � �CPGT-32.52LF CPGT 09 T3 08LF 3/8 5/32 1/32 .0868 .173 � � � �

CPGT-UF CPGT-21.50.5UF CPGT 06 02 02UF 1/4 3/32 .008 .0650 .110 � �CPGT-21.51UF CPGT 06 02 04UF 1/4 3/32 1/64 .0608 .110 � �

*These inserts have 90° countersunk holes. For more information, see page 725 in Catalog 1010.NOTE: Grade KD100 is a single-tipped PCD insert.

grades

KC

730

K31

3

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9225

KC

9240

KC

9315

KT3

15

KD

100

CPGW(-F)

CPMT-FW

CPMT-LF

CPMT-MF

CPMT-MW

48

®Screw-On Inserts


ISOcatalog number

CPGW-21.50.5F* CPGW 06 02 02F* 1/4 3/32 .008 .0650 .110 �CPGW-21.51F* CPGW 06 02 04F* 1/4 3/32 1/64 .0608 .110 �CPGW-21.52F* CPGW 06 02 08F* 1/4 3/32 1/32 .0521 .110 �

CPGW-32.51F* CPGW 09 T3 04F* 3/8 5/32 1/64 .0955 .173 �CPGW-32.52F* CPGW 09 T3 08F* 3/8 5/32 1/32 .0868 .173 �

CPMT-32.51MW CPMT 09 T3 04MW 3/8 5/32 1/64 .0923 .173 � � � � �CPMT-32.52MW CPMT 09 T3 08MW 3/8 5/32 1/32 .0840 .173 � � � � �

CPMT-21.52MF CPMT 06 02 08MF 1/4 3/32 1/32 .0521 .110 � � � � � �

CPMT-32.52MF CPMT 09 T3 08MF 3/8 5/32 1/32 .0868 .173 � � � � � �CPMT-32.53MF CPMT 09 T3 12MF 3/8 5/32 3/64 .0781 .173 � � � � �

CPMT-1.81.50.5LF CPMT 05 02 02LF 7/32 3/32 .008 .0563 .104 � �CPMT-1.81.51LF CPMT 05 02 04LF 7/32 3/32 1/64 .0521 .104 � � � �

CPMT-21.50.5LF CPMT 06 02 02LF 1/4 3/32 .008 .0650 .110 � � � �CPMT-21.51LF CPMT 06 02 04LF 1/4 3/32 1/64 .0608 .110 � � � � � � � � �CPMT-21.52LF CPMT 06 02 08LF 1/4 3/32 1/32 .0521 .110 � � � � � � � � �

CPMT-32.50.5LF CPMT 09 T3 02LF 3/8 5/32 .008 .0998 .173 � � � �CPMT-32.51LF CPMT 09 T3 04LF 3/8 5/32 1/64 .0955 .173 � � � � � � � � �CPMT-32.52LF CPMT 09 T3 08LF 3/8 5/32 1/32 .0868 .173 � � � � � � � � �

CPMT-21.50.5FW CPMT 06 02 02FW 1/4 3/32 .008 .0631 .110 � �CPMT-21.51FW CPMT 06 02 04FW 1/4 3/32 1/64 .0590 .110 � � � �CPMT-21.52FW CPMT 06 02 08FW 1/4 3/32 1/32 .0507 .110 � � � �

CPMT-32.51FW CPMT 09 T3 04FW 3/8 5/32 1/64 .0923 .173 � � � �CPMT-32.52FW CPMT 09 T3 08FW 3/8 5/32 1/32 .0840 .173 � � � �


dimensions

d s rε m d1

49

Screw-On Inserts

grades

dimensions

d s rε m d1


ISOcatalog number K

313

KC

730

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9225

KC

9240

KT3

15

KD

100

CPMT-UF CPMT-21.51UF CPMT 06 02 04UF 1/4 3/32 1/64 .0608 .110 � � � �

CPMT-32.51UF CPMT 09 T3 04UF 3/8 5/32 1/64 .0955 .173 � � � �

CPMW(-F) CPMW-1.81.50.5F* CPMW 05 02 02F* 7/32 3/32 .008 .0563 .104 �

DCGT-HP DCGT-21.50.5HP DCGT 07 02 02HP 1/4 3/32 .008 .1364 .110 � � � � �DCGT-21.51HP DCGT 07 02 04HP 1/4 3/32 1/64 .1275 .110 � � � � �DCGT-21.52HP DCGT 07 02 08HP 1/4 3/32 1/32 .1093 .110 � � �

DCGT-32.50.5HP DCGT 11 T3 02HP 3/8 5/32 .008 .2092 .173 � � � � �DCGT-32.51HP DCGT 11 T3 04HP 3/8 5/32 1/64 .2004 .173 � � � � �DCGT-32.52HP DCGT 11 T3 08HP 3/8 5/32 1/32 .1821 .173 � � � � �

DCGT-LF DCGT-21.5X.0LF DCGT 07 02 X.0LF 1/4 3/32 .0015 .1440 .110 �DCGT-21.50LF DCGT 07 02 01LF 1/4 3/32 .004 .1410 .110 � � �

DCGT-32.5X.0LF DCGT 11 T3 X.0LF 3/8 5/32 .0015 .2168 .173 �DCGT-32.50LF DCGT 11 T3 01LF 3/8 5/32 .004 .2139 .173 � � �

DCGT-432LF DCGT 15 04 08LF 1/2 3/16 1/32 .2550 .217 � � �

DCMT-11 DCMT-21.50.5-11 DCMT 07 02 02 -11 1/4 3/32 .008 .1364 .110 �DCMT-21.51-11 DCMT 07 02 04 -11 1/4 3/32 1/64 .1275 .110 �

DCMT-32.51-11 DCMT 11 T3 04 -11 3/8 5/32 1/64 .2004 .173 �DCMT-32.52-11 DCMT 11 T3 08 -11 3/8 5/32 1/32 .1821 .173 �


DCMT-LF

DCMT-MF

DCMT-UF

DCMW(-F)

DPGT-HP

50

®Screw-On Inserts

dimensions

d s rε m d1


ISOcatalog number K

313

KC

730

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9225

KC

9240

KT3

15

KD

100

grades

DPGT-21.50.5HP DPGT 07 02 02HP 1/4 3/32 .008 .1364 .110 � � � � �DPGT-21.51HP DPGT 07 02 04HP 1/4 3/32 1/64 .1275 .110 � � � � �DPGT-21.52HP DPGT 07 02 08HP 1/4 3/32 1/32 .1093 .110 � � � �

DPGT-32.51HP DPGT 11 T3 04HP 3/8 5/32 1/64 .2004 .173 � � � � �DPGT-32.52HP DPGT 11 T3 08HP 3/8 5/32 1/32 .1821 .173 � � � � �

DCMW-32.51F* DCMW 11 T3 04F* 3/8 5/32 1/64 .2004 .173 �

DCMT-21.51UF DCMT 07 02 04UF 1/4 3/32 1/64 .1275 .110 � � � �

DCMT-32.50.5UF DCMT 11 T3 02UF 3/8 5/32 .008 .2092 .173 � � � �DCMT-32.51UF DCMT 11 T3 04UF 3/8 5/32 1/64 .2004 .173 � � � �DCMT-32.52UF DCMT 11 T3 08UF 3/8 5/32 1/32 .1821 .173 � � � �

DCMT-32.51MF DCMT 11 T3 04MF 3/8 5/32 1/64 .2004 .173 � � � � � �DCMT-32.52MF DCMT 11 T3 08MF 3/8 5/32 1/32 .1821 .173 � � � � � � �DCMT-32.53MF DCMT 11 T3 12MF 3/8 5/32 3/64 .1639 .173 � � � � � �

DCMT-21.50.5LF DCMT 07 02 02LF 1/4 3/32 .008 .1364 .110 � � � �DCMT-21.51LF DCMT 07 02 04LF 1/4 3/32 1/64 .1275 .110 � � � � � � � � �

DCMT-32.50.5LF DCMT 11 T3 02LF 3/8 5/32 .008 .2092 .173 � � � �DCMT-32.51LF DCMT 11 T3 04LF 3/8 5/32 1/64 .2004 .173 � � � � � � � � �DCMT-32.52LF DCMT 11 T3 08LF 3/8 5/32 1/32 .1821 .173 � � � � � � � � �DCMT-32.53LF DCMT 11 T3 12LF 3/8 5/32 3/64 .1639 .173 � � � � � � � � �

DCMT-431LF DCMT 15 04 04LF 1/2 3/16 1/64 .2732 .217 � � � � � � � �DCMT-432LF DCMT 15 04 08LF 1/2 3/16 1/32 .2550 .217 � � � � � � � �


51

Screw-On Inserts

grades

dimensions

d s rε m d1


ISOcatalog number K

313

KC

730

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9225

KC

9240

KT3

15

KD

100

DPGT-LF DPGT-21.50LF DPGT 07 02 01LF 1/4 3/32 .004 .1410 .110 � � � � �DPGT-21.50.5LF DPGT 07 02 02LF 1/4 3/32 .008 .1364 .110 � � � � �DPGT-21.51LF DPGT 07 02 04LF 1/4 3/32 1/64 .1275 .110 � � � � �

DPGT-32.50LF DPGT 11 T3 01LF 3/8 5/32 .004 .2139 .173 � � � � �DPGT-32.50.5LF DPGT 11 T3 02LF 3/8 5/32 .008 .2092 .173 � � � � �DPGT-32.51LF DPGT 11 T3 04LF 3/8 5/32 1/64 .2004 .173 � � � � �DPGT-32.52LF DPGT 11 T3 08LF 3/8 5/32 1/32 .1821 .173 � � � � �

DPGW-F DPGW-32.51F* DPGW 11 T3 04F* 3/8 5/32 1/64 .2004 .173 �DPGW-32.52F* DPGW 11 T3 08F* 3/8 5/32 1/32 .1821 .173 �

DPMT-LF DPMT-21.50.5LF DPMT 07 02 02LF 1/4 3/32 .008 .1364 .110 � � �DPMT-21.51LF DPMT 07 02 04LF 1/4 3/32 1/64 .1275 .110 � � � � � � � �

DPMT-32.50.5LF DPMT 11 T3 02LF 3/8 5/32 .008 .2092 .173 � � �DPMT-32.51LF DPMT 11 T3 04LF 3/8 5/32 1/64 .2004 .173 � � � � � � � �DPMT-32.52LF DPMT 11 T3 08LF 3/8 5/32 1/32 .1821 .173 � � � � � � � �

DPMT-MF DPMT-32.52MF DPMT 11 T3 08MF 3/8 5/32 1/32 .1821 .173 � � � � � �

DPMT-UF DPMT-21.51UF DPMT 07 02 04UF 1/4 3/32 1/64 .1275 .110 � � � �

DPMT-32.51UF DPMT 11 T3 04UF 3/8 5/32 1/64 .2004 .173 � � � �DPMT-32.52UF DPMT 11 T3 08UF 3/8 5/32 1/32 .1821 .173 � � � �


DPMW(-F)

SCGT-LF

SCMT-11

SCMT-LF

SCMT-MF

52

®Screw-On Inserts

dimensions

d s rε m d1


ISOcatalog number K

313

KC

730

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9225

KC

9240

KT3

15

KD

100

grades

DPMW-21.50.5F* DPMW 07 02 02F* 1/4 3/32 .008 .1364 .110 �

DPMW-32.51F* DPMW 11 T3 04F* 3/8 5/32 1/64 .2004 .173 �DPMW-32.52F* DPMW 11 T3 08F* 3/8 5/32 1/32 .1821 .173 �

SCGT-432LF SCGT 12 04 08LF 1/2 3/16 1/32 .0906 .217 �

SCMT-32.51-11 SCMT 09 T3 04 -11 3/8 5/32 1/64 .0712 .173 �SCMT-32.52-11 SCMT 09 T3 08 -11 3/8 5/32 1/32 .0647 .173 �

SCMT-431-11 SCMT 12 04 04 -11 1/2 3/16 1/64 .0971 .217 �SCMT-432-11 SCMT 12 04 08 -11 1/2 3/16 1/32 .0906 .217 �

SCMT-32.51LF SCMT 09 T3 04LF 3/8 5/32 1/64 .0712 .173 � � � � � � � �SCMT-32.52LF SCMT 09 T3 08LF 3/8 5/32 1/32 .0647 .173 � � � � � � � �

SCMT-431LF SCMT 12 04 04LF 1/2 3/16 1/64 .0971 .217 � � � � � � �SCMT-432LF SCMT 12 04 08LF 1/2 3/16 1/32 .0906 .217 � � � � � � � �SCMT-433LF SCMT 12 04 12LF 1/2 3/16 3/64 .0841 .217 � � � � � � �

SCMT-32.52MF SCMT 09 T3 08MF 3/8 5/32 1/32 .0647 .173 � � � � � �

SCMT-432MF SCMT 12 04 08MF 1/2 3/16 1/32 .0906 .217 � � � � � �SCMT-433MF SCMT 12 04 12MF 1/2 3/16 3/64 .0841 .217 � � � � �


53

Screw-On Inserts

grades

dimensions

d s rε m d1


ISOcatalog number K

313

KC

730

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9225

KC

9240

KT3

15

KD

100

SCMT-UF SCMT-32.52UF SCMT 09 T3 08UF 3/8 5/32 1/32 .0647 .173 � � �

SPGH SPGH-2.51.52 SPGH 07 02 08 5/16 3/32 1/32 .0518 .128 �

SPGH-322 SPGH 09 03 08 3/8 1/8 1/32 .0647 .156 �

SPGT-LF SPGT-32.51LF SPGT 09 T3 04LF 3/8 5/32 1/64 .0712 .173 � � � �SPGT-32.52LF SPGT 09 T3 08LF 3/8 5/32 1/32 .0647 .173 � � � �

SPGT-432LF SPGT 12 04 08LF 1/2 3/16 1/32 .0906 .217 �

SPMT-LF SPMT-32.51LF SPMT 09 T3 04LF 3/8 5/32 1/64 .0712 .173 � � � � � � � �SPMT-32.52LF SPMT 09 T3 08LF 3/8 5/32 1/32 .0647 .173 � � � � � � �

SPMT-MF SPMT-32.52MF SPMT 09 T3 08MF 3/8 5/32 1/32 .0647 .173 � � � � � �

SPMT-432MF SPMT 12 04 08MF 1/2 3/16 1/32 .0906 .217 � � � � � �

SPMT-UF

TCGT-HP

TCGT-LF

TCMT-11

TCMT-LF

54

®Screw-On Inserts

dimensions

d s rε m d1


ISOcatalog number K

313

KC

730

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9225

KC

9240

KT3

15

KD

100

grades

TCMT-21.50.5LF TCMT 11 02 02LF 1/4 3/32 .008 .3670 .110 � � �TCMT-21.51LF TCMT 11 02 04LF 1/4 3/32 1/64 .3594 .110 � � � � � � � �TCMT-21.52LF TCMT 11 02 08LF 1/4 3/32 1/32 .3438 .110 � � � � � � � �

TCMT-32.50.5LF TCMT 16 T3 02LF 3/8 5/32 .008 .5545 .173 � � �TCMT-32.51LF TCMT 16 T3 04LF 3/8 5/32 1/64 .5469 .173 � � � � � � � �TCMT-32.52LF TCMT 16 T3 08LF 3/8 5/32 1/32 .5313 .173 � � � � � � � �TCMT-32.53LF TCMT 16 T3 12LF 3/8 5/32 3/64 .5156 .173 � � � � � � � �

TCMT-432LF TCMT 22 04 08LF 1/2 3/16 1/32 .7188 .217 � � � � � � �

TCMT-21.51-11 TCMT 11 02 04 -11 1/4 3/32 1/64 .3594 .110 �

TCMT-32.51-11 TCMT 16 T3 04 -11 3/8 5/32 1/64 .5469 .173 �TCMT-32.52-11 TCMT 16 T3 08 -11 3/8 5/32 1/32 .5313 .173 �

TCGT-21.5X0LF TCGT 11 02 X0LF 1/4 3/32 .0015 .3735 .110 �TCGT-21.50LF TCGT 11 02 01LF 1/4 3/32 .004 .3710 .110 � � �TCGT-21.51LF TCGT 11 02 04LF 1/4 3/32 1/64 .3594 .110 � �

TCGT-32.5X0LF TCGT 16 T3 X0LF 3/8 5/32 .0015 .5610 .173 �TCGT-32.50LF TCGT 16 T3 01LF 3/8 5/32 .004 .5585 .173 � �TCGT-32.50.5LF TCGT 16 T3 02LF 3/8 5/32 .008 .5545 .173 �TCGT-32.51LF TCGT 16 T3 04LF 3/8 5/32 1/64 .5469 .173 � � �TCGT-32.52LF TCGT 16 T3 08LF 3/8 5/32 1/32 .5313 .173 �

TCGT-21.50.5HP TCGT 11 02 02HP 1/4 3/32 .008 .3670 .110 � � � �TCGT-21.51HP TCGT 11 02 04HP 1/4 3/32 1/64 .3594 .110 � � � � �TCGT-21.52HP TCGT 11 02 08HP 1/4 3/32 1/32 .3438 .110 � � �

TCGT-32.50.5HP TCGT 16 T3 02HP 3/8 5/32 .008 .5545 .173 � �TCGT-32.51HP TCGT 16 T3 04HP 3/8 5/32 1/64 .5469 .173 � � � � �TCGT-32.52HP TCGT 16 T3 08HP 3/8 5/32 1/32 .5313 .173 � � � � �

SPMT-32.51UF SPMT 09 T3 04UF 3/8 5/32 1/64 .0712 .173 � � � �

55

Screw-On Inserts

grades

dimensions

d s rε m d1


ISOcatalog number K

313

KC

730

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9225

KC

9240

KT3

15

KD

100

TCMT-MF TCMT-21.52MF TCMT 11 02 08MF 1/4 3/32 1/32 .3438 .110 � � � � � �

TCMT-32.52MF TCMT 16 T3 08MF 3/8 5/32 1/32 .5313 .173 � � � � � �TCMT-32.53MF TCMT 16 T3 12MF 3/8 5/32 3/64 .5156 .173 � � � � �

TCMT-UF TCMT-21.51UF TCMT 11 02 04UF 1/4 3/32 1/64 .3594 .110 � � �TCMT-21.52UF TCMT 11 02 08UF 1/4 3/32 1/32 .3438 .110 � � �

TCMT-32.52UF TCMT 16 T3 08UF 3/8 5/32 1/32 .5313 .173 � � �

TCMW(-F) TCMW-21.51F* TCMW 11 02 04F* 1/4 3/32 1/64 .3594 .110 �

TDHB TDHB-1.280.750.5** TDHB 07T 1,202** .160 3/64 .008 .2293 .094 � �TDHB-1.280.751** TDHB 07T 1,204** .160 3/64 1/64 .2213 .094 � �TDHB-1.280.752** TDHB 07T 1,208** .160 3/64 1/32 .2053 .094 � �

TDHH TDHH-1.280.750.5R TDHH 07T 1,202R .160 3/64 .008 .2293 .094 �TDHH-1.280.750.5L TDHH 07T 1,202L .160 3/64 .008 .2293 .094 �TDHH-1.280.751R TDHH 07T 1,204R .160 3/64 1/64 .2213 .094 �TDHH-1.280.751L TDHH 07T 1,204L .160 3/64 1/64 .2213 .094 �TDHH-1.280.752R TDHH 07T 1,208R .160 3/64 1/32 .2053 .094 �TDHH-1.280.752L TDHH 07T 1,208L .160 3/64 1/32 .2053 .094 �

*Grade KD100 is a single-tipped PCD insert.**Available in coated carbide and single-tipped PCD grade KD100.

TPGM(-F)

TPGT-HP

TPGT-LF

TPGW(-F)

TPMT-LF

56

®Screw-On Inserts

dimensions

d s rε m d1


ISOcatalog number K

313

KC

730

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9225

KC

9240

KT3

15

KD

100

grades

TPMT-1.81.50.5LF TPMT 09 02 02LF 7/32 3/32 .008 .3201 .104 � � �TPMT-1.81.51LF TPMT 09 02 04LF 7/32 3/32 1/64 .3125 .104 � � � � � � � � �

TPMT-21.50.5LF TPMT 11 02 02LF 1/4 3/32 .008 .3670 .110 � � �TPMT-21.51LF TPMT 11 02 04LF 1/4 3/32 1/64 .3594 .110 � � � � � � � � �TPMT-21.52LF TPMT 11 02 08LF 1/4 3/32 1/32 .3438 .110 � � � � � � � �

TPMT-32.51LF TPMT 16 T3 04LF 3/8 5/32 1/64 .5469 .173 � � � � � � � �TPMT-32.52LF TPMT 16 T3 08LF 3/8 5/32 1/32 .5313 .173 � � � � � � � �TPMT-32.53LF TPMT 16 T3 12LF 3/8 5/32 3/64 .5156 .173 � � � � � � � �

TPMT-432LF TPMT 22 04 08LF 1/2 3/16 1/32 .7188 .217 � � � � � � �

TPGW-21.50.5F** TPGW 11 02 02F** 1/4 3/32 .008 .3670 .110 �TPGW-21.51F** TPGW 11 02 04F** 1/4 3/32 1/64 .3594 .110 �TPGW-21.52F** TPGW 11 02 08F** 1/4 3/32 1/32 .3438 .110 �

TPGT-1.81.50.5LF TPGT 09 02 02LF 7/32 3/32 .008 .3201 .104 � � � �TPGT-1.81.51LF TPGT 09 02 04LF 7/32 3/32 1/64 .3125 .104 � � � �

TPGT-21.50LF TPGT 11 02 01LF 1/4 3/32 .004 .3710 .110 � � � �TPGT-21.50.5LF TPGT 11 02 02LF 1/4 3/32 .008 .3670 .110 � � �TPGT-21.51LF TPGT 11 02 04LF 1/4 3/32 1/64 .3594 .110 � � � �TPGT-21.52LF TPGT 11 02 08LF 1/4 3/32 1/32 .3438 .110 � � �

TPGT-32.51LF TPGT 16 T3 04LF 3/8 5/32 1/64 .5469 .173 � � � �TPGT-32.52LF TPGT 16 T3 08LF 3/8 5/32 1/32 .5313 .173 � � � �

TPGT-21.50.5HP TPGT 11 02 02HP 1/4 3/32 .008 .3670 .110 � � � �TPGT-21.51HP TPGT 11 02 04HP 1/4 3/32 1/64 .3594 .110 � � � � �TPGT-21.52HP TPGT 11 02 08HP 1/4 3/32 1/32 .3438 .110 � � �

TPGT-32.50.5HP TPGT 16 T3 02HP 3/8 5/32 .008 .5545 .173 � � �TPGT-32.51HP TPGT 16 T3 04HP 3/8 5/32 1/64 .5469 .173 � � � � �TPGT-32.52HP TPGT 16 T3 08HP 3/8 5/32 1/32 .5313 .173 � � � �

TPGM-21.50 TPGT 11 02 01K 1/4 3/32 .004 .3710 .110 �TPGM-21.50.5 TPGT 11 02 02K 1/4 3/32 .008 .3670 .110 �TPGM-21.50.5F** TPGT 11 02 02K** 1/4 3/32 .008 .3670 .110 �TPGM-21.51 TPGT 11 02 04K 1/4 3/32 1/64 .3594 .110 �TPGM-21.51F** TPGT 11 02 04K** 1/4 3/32 1/64 .3594 .110 �TPGM-21.52 TPGT 11 02 08K 1/4 3/32 1/32 .3438 .110 �TPGM-21.52F** TPGT 11 02 08K** 1/4 3/32 1/32 .3438 .110 �

TPGM-32.51* TPGH 16 T3 04* 3/8 5/32 1/64 .5469 .173 � � � � � � �TPGM-32.52* TPGH 09 T3 08* 3/8 5/32 1/32 .5313 .173 � � � � � � � �

*These inserts have 90° countersunk holes. For more information, see page 725 in Catalog 1010.**Grade KD100 is a single-tipped PCD insert.

57

Screw-On Inserts

grades

dimensions

d s rε m d1


ISOcatalog number K

313

KC

730

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9225

KC

9240

KT3

15

KD

100

TPMT-MF TPMT-21.52MF TPMT 11 02 08MF 1/4 3/32 1/32 .3438 .110 � � � � � �

TPMT-32.52MF TPMT 16 T3 08MF 3/8 5/32 1/32 .5313 .173 � � � � �TPMT-32.53MF TPMT 16 T3 12MF 3/8 5/32 3/64 .5156 .173 � � � � � �

TPMT-UF TPMT-21.50.5UF TPMT 11 02 02UF 1/4 3/32 .008 .3670 .110 � � �TPMT-21.51UF TPMT 11 02 04UF 1/4 3/32 1/64 .3594 .110 � � � �

TPMT-32.51UF TPMT 16 T3 04UF 3/8 5/32 1/64 .5469 .173 � � �TPMT-32.52UF TPMT 16 T3 08UF 3/8 5/32 1/32 .5313 .173 � � �

VBGT-HP VBGT-220.5HP VBGT 11 03 02HP 1/4 1/8 .008 .2721 .110 � �VBGT-221HP VBGT 11 03 04HP 1/4 1/8 1/64 .2544 .110 � �

VBGT-331HP VBGT 16 04 04HP 3/8 3/16 1/64 .3997 .173 � � � � �VBGT-332HP VBGT 16 04 08HP 3/8 3/16 1/32 .3634 .173 � � � � �

VBGT-LF VBGT-22X.0LF VBGT 11 03 X0LF 1/4 1/8 .0015 .2872 .110 �VBGT-220LF VBGT 11 03 01LF 1/4 1/8 .004 .2814 .110 � � � �VBGT-220.5LF VBGT 11 03 02LF 1/4 1/8 .008 .2721 .110 � � � �VBGT-221LF VBGT 11 03 04LF 1/4 1/8 1/64 .2544 .110 � � � �

VBGT-33X.0LF VBGT 16 04 X0LF 3/8 3/16 .0015 .4325 .173 �VBGT-330LF VBGT 16 04 01LF 3/8 3/16 .004 .4267 .173 � � � �VBGT-330.5LF VBGT 16 04 02LF 3/8 3/16 .008 .4174 .173 � � � �VBGT-331LF VBGT 16 04 04LF 3/8 3/16 1/64 .3997 .173 � � � �

VBGW-F VBGW-331F* VBGW 16 04 04F* 3/8 3/16 1/64 .3997 .173 �

VBMT-11 VBMT-220.5-11 VBMT 11 03 02 -11 1/4 1/8 .008 .2721 .110 �VBMT-221-11 VBMT 11 03 04 -11 1/4 1/8 1/64 .2544 .110 �

VBMT-331-11 VBMT 16 04 04 -11 3/8 3/16 1/64 .3997 .173 �VBMT-332-11 VBMT 16 04 08 -11 3/8 3/16 1/32 .3634 .173 �


58

®Screw-On Inserts

dimensionsinsertcatalog number

ISOcatalog number K

313

KC

730

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9225

KC

9240

KT3

15

KD

100

grades

d s rε m d1 l

VBMT-220.5LF VBMT 11 03 02LF 1/4 1/8 .008 .2721 .110 — � � � �VBMT-221LF VBMT 11 03 04LF 1/4 1/8 1/64 .2544 .110 — � � � � � � � � �VBMT-222LF VBMT 11 03 08LF 1/4 1/8 1/32 .2180 .110 — � � � � � � � � �

VBMT-330.5LF VBMT 16 04 02LF 3/8 3/16 .008 .4174 .173 — � � � �VBMT-331LF VBMT 16 04 04LF 3/8 3/16 1/64 .3997 .173 — � � � � � � � � �VBMT-332LF VBMT 16 04 08LF 3/8 3/16 1/32 .3634 .173 — � � � � � � � � �

VBMT-LF

VPGP-443K VPGP 22 06 12K 1/2 1/4 3/64 — .203 — �VPGP

WCMT-21.51LF WCMT 04 02 04LF 1/4 3/32 1/64 .0608 .110 .171 � � �

WCMT-32.52LF WCMT 06 T3 08LF 3/8 5/32 1/32 .0868 .173 .257 � � �WCMT-LF

WPMT-1.51.21LF WPMT S3 T1 04LF 3/16 5/64 1/64 .0434 .085 .128 � �

WPMT-21.51LF WPMT 04 02 04LF 1/4 3/32 1/64 .0608 .110 .171 � � � � � � � �

WPMT-32.51LF WPMT 06 T3 04LF 3/8 5/32 1/64 .0955 .173 .257 � � � � � � � �WPMT-32.52LF WPMT 06 T3 08LF 3/8 5/32 1/32 .0868 .173 .257 � � � � � � � �

WPMT-LF

59

Steel

Stainless Steel

Non-Ferrous

High-Temperature Alloys

Top Notch®

Profiling InsertsTop Notch®

Profiling Inserts

Medium MachiningNP.5M, NP.5..

FinishingNPGR

FinishingNP.5..

60

®

850 260

800 240

600 180

550 165

KT315

KC9110

KC9125

KC8050


3rd Step – Select the Cutting SpeedSpeed - sfm (m/min)

Material Grade 170(50)

1300(400)

330(100)

490(150)

655(200)

820(250)

980(300)

1150(350)

Starting Conditions

sfm m/min

steel

KENNA PERFECT Top Notch Profiling


NOTE: See Technical Section of Catalog 1010for chipbreaker details (pages 656-657).

NP.5MNP.5..





KC9110 KC8050 KC8050

KC9110 KC9125 KC9125

KT315 KC9110 KC9110

KT315 KT315 KC9110

Cutting Condition

NOTE: For expert application guidance, refer to Catalog 1010, page 633.

Steel — Carbon, Alloy, and Tool Steels up to 48 HRC

61

KENNA PERFECT Top Notch Profiling

750 230

600 180

550 170

500 150

KT315

KC5010

KC9225

KC8050




170(50)

1300(400)

330(100)

490(150)

655(200)

820(250)

980(300)

1150(350)

Starting Conditions

sfm m/min

stainlesssteel







KC9225 KC8050 KC8050

KC5010 KC8050 KC8050

KC5010 KC9225 KC9225

KT315 KC5010 KC9225

Cutting Condition

Stainless Steel — Austenitic

Non-Ferrous

2500 765

1800 550

650 200

500 150

KD100

KC5410

KC5010

K68/K313




800(250)

6400(2000)

1600(500)

2400(750)

3200(1000)

4000(1250)

4800(1500)

5600(1750)

Starting Conditions

sfm m/min

non-ferrous





KC5010 KC5010 K68/K313

KC5010 KC5010 K68/K313

KD100 KC5410 KC5010

KD100 KC5410 KC5010

Cutting Condition

62

®KENNA PERFECT Top Notch Profiling


600 180

400 120

200 60

170 50

230 70

100 30

KD050

KD120

KC5010

KC5025

KC8050

K68/K313




50(15)

750(230)

120(40)

180(55)

250(80)

330(100)

550(170)

655(200)

Starting Conditions

sfm m/min

high-tempalloys





KC5025 K68/K313 K68/K313

KC5010 KC5010 KC8050

KD120 KC5010 KC5010

KD050 KC5010 KC5010

Cutting Condition

High-Temperature Alloys — Nickel, Iron, or Cobalt-Based Alloys; Titanium Alloys

63

Top Notch Profiling Inserts

NPGR NPGR-51R KCGR 11 03 04 R08 1/4 1/8 1/64 .3584 .375 � � � � � � � � � �NPGR-52R KCGR 11 03 08 R08 1/4 1/8 1/32 .3409 .375 � � � � � � � � � �

NPGR-51L KCGR 11 03 04 L08 1/4 1/8 1/64 .3584 .375 � � � � � � � � � �NPGR-52L KCGR 11 03 08 L08 1/4 1/8 1/32 .3409 .375 � � � � � � � � � �

NPR-50.5 KCGX 11 03 01 R15 1/4 1/8 .004 .3712 .375 � � � � � � � � � � �NPR-50.8 KCGX 11 03 02 R15 1/4 1/8 .008 .3677 .375 � � � � � � � � � � �NPR-51 KCGX 11 03 04 R15 1/4 1/8 1/64 .3584 .375 � � � � � � � � � � � �NPR-52 KCGX 11 03 08 R15 1/4 1/8 1/32 .3409 .375 � � � � � � � � �

NPL-50.5 KCGX 11 03 01 L15 1/4 1/8 .005 .3712 .375 � � � � � � � � � � �NPL-50.8 KCGX 11 03 02 L15 1/4 1/8 .008 .3677 .375 � � � � � � � � � �NPL-51 KCGX 11 03 04 L15 1/4 1/8 1/64 .3584 .375 � � � � � � � � � � � �NPL-52 KCGX 11 03 08 L15 1/4 1/8 1/32 .3409 .375 � � � � � � � � �

NPR-5M02 KCUX 11 03 02 R15 1/4 1/8 .008 .3671 .375 � � � � �NPR-5M05 KCUX 11 03 05 R15 1/4 1/8 .020 .3533 .375 � � � � � �NPR-5M10 KCUX 11 03 10 R15 1/4 1/8 .039 .3303 .375 �

NPL-5M02 KCUX 11 03 02 L15 1/4 1/8 .008 .3671 .375 � � � � �NPL-5M05 KCUX 11 03 05 L15 1/4 1/8 .020 .3533 .375 � � � � � �NPL-5M10 KCUX 11 03 10 L15 1/4 1/8 .039 .3303 .375 �

dimensions

a s rε m l1


ISOcatalog number K

313

K68

KC

5010

KC

5025

KC

5410

KC

8050

KC

9110

KC

9125

KC

9225

KT3

15

KC

9315

KD

100

KD

120

grades

precision ground inch nose radius

NPR/L

precision ground inch nose radius

NPR/L

precision molded metric nose radius

NOTE: Grade KD100 is a single-tipped PCD insert.Grade KD120 is a single-tipped CBN insert.

64

®Positive Boring InsertsKendex Mini

Kendex mini boringbars are speciallydesigned to finish bore diameters assmall as .250 inches.

Kendex mini insertscontain two precisionground cutting edges.Inserts are available in uncoated and PVDcoated grades.

Ground inserts in their neutral position and the precision insert pocket combine to ensure superior surface finishes. Our unique systemdesign protects the second cutting edgefrom damage while thefirst edge is in operation.

See boring bars on pages 186-188.

BPGF BPGF 03 02 01R .118 .079 .079 .002 .055 � �BPGF 03 02 01L .118 .079 .079 .002 .055 � �

BPGF 03 02 02R .118 .079 .079 .008 .055 � �BPGF 03 02 02L .118 .079 .079 .008 .055 � �

BPGF 05 03 01R .177 .098 .098 .002 .047 � �BPGF 05 03 01L .177 .098 .098 .002 .047 � �

BPGF 05 03 02R .177 .098 .098 .008 .047 � �BPGF 05 03 02L .177 .098 .098 .008 .047 � �

BPGF 05 03 04R .177 .098 .098 .016 .063 � �BPGF 05 03 04L .177 .098 .098 .016 .063 � �

dimensions

al rεs m

ANSI/ISO insert catalog number

right hand left hand K68

KC

720

grades


65

Threading Inserts

page

Top Notch Threading and Grooving Toolholders . . . . . . . . . . . . . . . . . . . . . . . . . . see page 172

Top Notch Threading and Grooving Boring Bars. . . . . . . . . . . . . . . . . . . . . . see pages 190-193

LT Toolholders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see page 173

LT Boring Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see pages 194-197

LT Shims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see page 196

Threading Technical Data . . . . . . . . . . . . . . . . . . see pages 674-692 in Lathe Tooling Catalog 1010

Top Notch Threading . . . . . . . . . . . . . . . . . . . . . 65

KENNA PERFECT Selection Guide . . . . . . . . . . . . . . . . . 66

Thread Form Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Insert ID System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Top Notch Threading Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

LT – Laydown Threading Inserts . . . . . . . . . . . . . . . . . . . . . . 77

KENNA PERFECT Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . 78

Thread Form Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Insert ID System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

LT Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

66

Step 1: Select threading method and hand of tooling.What you need to know:

� external/internal operation � spindle rotation� feed direction

Step 2: Select insert.What you need to know:

� thread form � hand of insert

◆ See thread form guide on pages 68-70.◆ Select cresting inserts for fully

controlled thread form including diameter control. Cresting inserts eliminate the need for deburring.

◆ Non-cresting partial profile inserts can cut a variety of thread pitches. Chip control is only available with partial profile inserts.

4 Easy Steps to Increased Threading Productivity

Feed Direction Towards the Chuck

external left-hand thread

external right-hand thread

internal left-hand thread

internal right-hand thread

insertinsertinsertinsert

Feed Direction Away from the Chuck

external right-hand thread

external left-hand thread

internal right-hand thread

internal left-hand thread

L

L

LL L

L

R

R

R

R

RR

L LR R

KC5025 KC5010

KENNA PERFECT Top Notch®

Threading System

KENNA PERFECT Top Notch®

Threading System

catalog number

insertinsert insertinsert

NT-2RK � �NT-3RK � �NT-4RK � �

67

Examples: Chip Control: NT-K or NT-CK (partial profile only)Neutral: NT, NT-C, NTF, NTC, NJ, NJF, NDC-V, NA, NDC, NTB-A/BPositive: NTP, NTK, NJP, NJK

Recommendations for Grade and Speed Selections

Step 3: Select grade and speed.What you need to know:

� workpiece material� operation

4 Easy Steps to Increased Threading Productivity

Step 4: Select the toolholder.What you need to know:

� external/internal operation� pitch diameter

(for internal operations)� hand of tool� insert size

NOTE: Optimize your threading operation by using the proper infeed angle and the recommended infeed values. See the Technical Section of Catalog 1010, pages 677-678 and 683, for more details.

NSR-163D NG-3RNSR-164D* NG-4R

catalog number gage insert

NOTE: Top Notch toolholders and boring bars are listed with grooving inserts as the gage insert. They are compatible withthreading inserts of the same size.* Refer to Lathe Tooling Catalog 1010 for a complete listing of

OD toolholders, ID boring bars, and inserts.

stainless steel non-ferrous high-temp

alloyssteelthreadingoperation

general purpose style general purpose style general purpose style general purpose style

KC5025 chip control KC5025 chip control KC5025positive

KC5025positive

external100-650 sfm or neutral 150-450 sfm or neutral 150-1,000 sfm 20-250 sfm

high performance high performance high performance high performance

KC5010 chip control KC5010 chip control KC5410/KC5010positive

KC5010positive

150-650 sfm or neutral 200-650 sfm or neutral 250-1,300 sfm 80-400 sfm


KC5025 chip control KC5025 chip control KC5025positive

KC5025positive

internal100-550 sfm or neutral 150-350 sfm or neutral 150-800 sfm 20-200 sfm


KC5010 chip control KC5010 chip control KC5410/KC5010positive

KC5010positive

150-550 sfm or neutral 200-550 sfm or neutral 250-1,100 sfm 80-325 sfm

68

®Top Notch ThreadingTop Notch Thread Form Guide

• All Top Notch threading inserts are precision ground toprovide accurate edge location and secure locking ofthe insert in the toolholder pocket.

• Top Notch threading and grooving inserts can be usedin either toolholders or boring bars.

• All non-cresting type threading inserts can be used for either external or internal applications. All crestingtype inserts are designated specifically for external or internal use.

• Right-hand Top Notch threading toolholders use right-hand inserts. Left-hand Top Notch threading toolholders use left-hand inserts.

• Right-hand Top Notch threading boring bars use left-hand inserts. Left-hand Top Notch threading boring bars use right-hand inserts.

left-hand right-hand

insert style thread form

rakeangle cresting

external internal

tpi range (pitch in mm)

application

60° Partial Profile

NT-1L60°V neutral no none 12 - 24 internal threading in small diameter boresUN (1,00 - 2,00) • used with boring bars only

class 2 • one cutting edgeISO

6g/6Hpage 72

NT60°V neutral no size 2 = 8 - 36 size 2 = 7 - 20 general purposeUN (0,70 - 3,00) (1,25 - 3,50) • a popular threading insert style

class 2 size 3 = 6 - 20 size 3 = 5 - 12 for general useISO (1,25 - 4,00) (2,00 - 5,00) • provides satisfactory performance

6g/6H in most applicationspage 72

NTP60°V 5° no size 2 = 8 - 36 size 2 = 7 - 20 general purposeUN positive (0,70 - 3,00) (1,25 - 3,50) • ground positive rake

class 2 size 3 = 6 - 20 size 3 = 5 - 12 reduces cutting forcesISO (1,25 - 4,00) (2,00 - 5,00) • recommended for

6g/6H threading aluminum andpage 72 difficult-to-machine materials

NT-K60°V 10° no size 2 = 8 - 36 size 2 = 7 - 20 general purpose with chip controlUN positive (0,70 - 3,00) (1,25 - 3,50) • threading insert with chip control

class 2 chip size 3 = 6 - 20 size 3 = 5 - 12 and positive cutting actionISO control (1,25 - 4,00) (2,00 - 5,00) • especially helpful for

6g/6H internal threading operationspage 73

NTF60°V neutral no size 2 = 14 - 44 size 2 = 12 - 24 fine pitches, close to shoulder operationsUN (0,60 - 1,75) (1,00 - 2,00) • smaller nose radius than

class 2 size 3 = 10 - 44 size 3 = 9 - 24 general purpose insertsISO (0,60 - 2,50) (1,00 - 2,50) • use this style insert only

6g/6H when required for the operationpage 73

NTK60° V 5° no size 2 = 14 - 44 size 2 = 12 - 24 fine pitches, close to shoulder operationsUN positive (0,60 - 1,75) (1,00 - 2,00) • ground positive rake

class 2 size 3 = 10 - 44 size 3 = 9 - 24 • smaller nose radius than general ISO (0,60 - 2,50) (1,00 - 2,50) purpose inserts

6g/6H • use this insert only when required page 73 for the operation

NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.

69

Top Notch Thread Form Guide (cont'd)

Top Notch Threading


60° American UN

NTC60° V neutral yes each insert each insert cresting style for UN inch threadsUN produces a produces a • offers the best possible tool life for

class 2 specific tpi specific tpi the application• produces the best surface finish, and

accurate thread depthpage 74

60° ISO Metric

NTCISO neutral yes each insert each insert cresting style for metric threads

6g/6H produces a produces a • offers the best possible tool life for specific pitch specific pitch the application

• produces the best surface finish and accurate thread depth

page 74

60° UNJ

NJ60° V neutral no each insert use a class 2 UNJ external threadsUNJ produces a insert, then finish • close tolerance on nose radius to control

class 3 specific tpi bore the minor thread root radius

page 75 diameter • meets or exceeds SPEC MIL-S-8879C

NJP60° V 5° no each insert use a class 2 UNJ external threadsUNJ positive produces a insert, then finish • ground positive rake

class 3 specific tpi bore the minor • close tolerance on nose radius to controldiameter thread root radius

page 75 • meets or exceeds SPEC MIL-S-8879C

NJF60° V neutral no each insert use a class 2 UNJ external threads, fine pitches, close to shoulderUNJ produces a insert, then finish • close to shoulder applications

class 3 specific tpi bore the minor • close tolerance on nose radius to controldiameter thread root radius

page 75 • meets or exceeds SPEC MIL-S-8879C

NJK60° V 5° no each insert use a class 2 UNJ external threads, fine pitches, close to shoulderUNJ positive produces a insert, then finish • ground positive rake

class 3 specific tpi bore the minor • close to shoulder applicationsdiameter • close tolerance on nose radius to control

thread root radiuspage 75 • meets or exceeds SPEC MIL-S-8879C

insert stylethread form

rake angle cresting

external internal


application

70

®Top Notch ThreadingTop Notch Thread Form Guide

insertstyle

thread form

rake angle

crestingexternal internal


application

60° NPT/NPTF

NDC-V60° V neutral yes each insert each insert national pipe threadsNPT produces a produces a • offers the best possible tool life

specific tpi specific tpi for the application• produces the best surface

finish, and accurate thread depth• for tapered threads where

page 76 fluid tightness is required

55° Whitworth for BSW, BSP

NWC55° V neutral yes each insert each insert Whitworth

produces a produces a • offers the best possible tool lifespecific tpi specific tpi for the application

• produces the best surface

page 76 finish, and accurate thread depth

Specials

Catalog 1010, — — — — — made to your order(A01-44) • let our expert design team and page 191 manufacturing personnel make the

insert required for your application, including special API thread forms.


Kennametal high-performance carbide grades, coupled with our rigid Top Notch clamping design, offer the metalworking industry optimumthreading productivity.

When Kennametal’s large inventory of standard products doesn’t completelysatisfy your productivity requirements, consider having Top Notch threadinginserts custom ground to meet your unique application needs.

The large variety of Top Notch blank sizes allows maximum flexibility inthreading endform design, especially for extra wide or oil field applications.

Common examples of special forms are shown in Catalog 1010 on page 191. Please contact your local Kennametal representative for recommendations on satisfying your special threading needs.

Features/Benefits:

• Quotes are handled quickly and efficiently using state-of-the-art CADdesign software and electronic database software.

• Our Carbide Specials Design Team is your link to one of the industry’slargest electronic data bases. They can solve your most challengingdesign problems.

• When required, concept drawings are available to facilitate your engineering development.

• A large number of high-performance carbide grades are available to optimize your productivity. The option of producing standard insert styles in non-standard carbide grades allows you to optimize tool life performance.

Special Top Notch Threading Inserts

71

Kennametal Threading SystemsTop Notch Threading Insert Identification System

N J F – 3 R 12 ▫▫ ▫ ▫

1.Type of Insert

2.Insert Style

7.Definition ofInsert

3.Additional Information

4.Insert Size

insertnumber

s

1 .1002 .1503 .1954 .2555 .3806 .3838 .438

5.Industry ThreadIdentification

N — Top Notch

A — AcmeB — blank (special forms)D — API or NPTJ — UNJ threadT — 60° V threadU — undercutting or relievingW — 55° V Whitworth

6.Hand of Insert

8.AdditionalInformation

R — rightL — left

B — ButtressF — fine pitchS — Stub AcmeC — crestingP — positive rakeK — fine pitch, positiveU — utility**

Position indicates API or"drilling industry "(e.g.—10RD,8RD, .038)

orControlled root radius threadinginserts indicate the root radiusin .001 increments (NJ, NJF, NJP, NJK).

• threads per inchor pitch (for metric)

• “A” or “B” typeButtress insert

• taper per foot—API threads

I — internal threadE — external thread

(used only if internaland external threadforms are different)

M — multiple toothK — standard chip controlC — coarse pitchD — Dry Seal

* Kennametal proprietary standard only.** Utility threading inserts can only be used in

NSUR/L utility holders.

Top Notch Threading and Grooving Insert Dimensions

NJF

NT NT-K

NTC

insertsize

a s

inch mm inch mm

1 .100 2,54 .100 2,54

2 .219 5,56 .150 3,81

3 .344 8,74 .195 4,95

4 .453 11,51 .255 6,48

5 .688 17,48 .380 9,65

6 .453 11,51 .383 9,73

8 .312 7,93 .438 11,13

72

®Top Notch Threading Inserts

... High-performance choice under optimal conditions

... First choice for general machining conditions

... Preferred choice for unfavorable conditions

NT-1Lone cutting edge

— NT-1L .002 0,05 .047 1,19— (1,0-2,0) — 12-24 � � �.004 0,10 .043 1,09

NT NT-2R .003 0,08.075 1,91 (0,70-3,0) (1,25-3,5) 8-36 7-20

� � � �NT-2L .005 0,13 � � � �

NT-3R .005 0,13.098 2,49 (1,25-4,0) (2,0-5,0) 6-20 5-12

� � � �NT-3L .008 0,20 � � � �

NTP NTP-2R .003 0,08.075 1,91 (0,70-3,0) (1,25-3,5) 8-36 7-20

� � � �NTP-2L .005 0,13 � � � �

NTP-3R .005 0,13.098 2,49 (1,25-4,0) (2,0-5,0) 6-20 5-12

� � � � �NTP-3L .008 0,20 � � � � �

pitch (mm) tpirε* e*right hand left hand

int.int. ext.ext.inch inchmm mm

insert catalog number

K68

K31

3

KC

5010

KC

5025

KC

5410

gradesdimensions

steel

stainless steel

non-ferrous

high-temp alloysNOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.* rε and e dimensions are ±.001 in. (±0,025 mm) unless otherwise noted.

73







K68

K31

3

KC

5010

KC

5025

KC

5410

gradesdimensions

steel

stainless steel

non-ferrous

high-temp alloys

Top Notch Threading Inserts

NTF NTF-2R .002 0,05 .110 2,79 (0,6-1,75) (1,0-2,0) 14-44 12-24 � � �NTF-2L .004 0,10 � � �

NTF-3R .002 0,05 .141 3,58 (0,6-2,5) (1,0-2,5) 10-44 9-24 � � �NTF-3L .004 0,10 � � �

NTK NTK-2R .002 0,05 .110 2,79 (0,6-1,75) (1,0-2,0) 14-44 12-24 � � �NTK-2L .004 0,10 � � �

NTK-3R .002 0,05 .141 3,58 (0,6-2,5) (1,0-2,5) 10-44 9-24 � � �NTK-3L .004 0,10 � � �

NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.* rε and e dimensions are ±.001 in. (±0,025 mm) unless otherwise noted.

NT-K NT-2RK .003 0,08.075 1,91 (0,70-3,0) (1,25-3,5) 8-36 7-20

� �NT-2LK .005 0,13 � �

NT-3RK .005 0,13.098 2,49 (1,25-4,0) (2,0-5,0) 6-20 5-12

� �NT-3LK .008 0,20 � �

74

®







K68

K31

3

KC

5010

KC

5025

KC

5410

gradesdimensions

steel

stainless steel

non-ferrous

high-temp alloys


NTC NTC-3R7E — .0186 0,43 .107 2,72 — — 7 — � �

NTC-3R8E .0150 0,38 .107 2,72 — — 8 — � �NTC-3L8E � �

NTC-3R8I .0070 0,18 .107 2,72 — — — 8 �NTC-3L8I �

NTC-3R9E — .0140 0,33 .107 2,72 — — 9 — � �

NTC-3R10E .0124 0,30 .107 2,72 — — 10 — � �NTC-3L10E � �

NTC-3R10I .0052 0,13 .107 2,72 — — — 10 �NTC-3L10I �

NTC-3R11E — .0110 0,28 .107 2,72 — — 11 — � �

NTC-3R12E .0100 0,25 .148 3,76 — — 12 — � �NTC-3L12E � �

NTC-3R12I .0040 0,10 .148 3,76 — — — 12 �NTC-3L12I �

NTC-3R13E — .0096 0,23 .148 3,76 — — 13 — � �

NTC-3R14E .0088 0,23 .148 3,76 — — 14 — � �NTC-3L14E � �

NTC-3R14I .0037 0,08 .148 3,76 — — — 14 �NTC-3L14I �

NTC-3R16E .0075 0,20 .148 3,76 — — 16 — � �NTC-3L16E � �

NTC-3R16I .0030 0,08 .148 3,76 — — — 16 �NTC-3L16I �

NTC-3R18E .0070 0,18 .148 3,76 — — 18 — � �NTC-3L18E � �

NTC-3R20E .0062 0,15 .148 3,76 — — 20 — � �NTC-3L20E � �

NTC-3R24E — .0060 0,15 .148 3,76 — — 24 — � �.0045 0,11

NTC-3R28E — .0052 0,13 .148 3,76 — — 28 — � �.0039 0,10

NTC-3R32E — .0045 0,11 .148 3,76 — — 32 — � �.0034 0,09

NTCmetric-ISO


NTC-3MR150E .0074 0,188 .145 3,68 (1,5) — — — � �NTC-3ML150E .0086 0,218 � �

NTC-3MR150I .0031 0,079 .145 3,68 — (1,5) — — �NTC-3ML150I �

NTC-3MR200E .0098 0,249 .145 3,68 (2,0) — — — � �NTC-3ML200E .0114 0,290 � �

NTC-3MR200I .0038 0,096 .145 3,68 — (2,0) — — �NTC-3ML200I �

NTC-3MR300E .0148 0,376 .114 2,90 (3,0) — — — � �NTC-3ML300E .0170 0,432 � �

NTC-3MR300I .0053 0,135 .106 2,69 — (3,0) — — �NTC-3ML300I �

75







K68

K31

3

KC

5010

KC

5025

KC

5410

gradesdimensions

steel

stainless steel

non-ferrous

high-temp alloys


NJ NJ-3020R8 .0188 0,478 .098 2,49 — — 8 — � �NJ-3020L8 .0198 0,503 � �

NJ-3014R12 .0125 0,318 .098 2,49 — — 12 — � � �NJ-3014L12 .0135 0,343 � � �

NJ-3010R16 .0094 0,239 .098 2,49 — — 16 — � � �NJ-3010L16 .0104 0,264 � �

NJP NJP-3020R8 .0188 0,478 .098 2,49 — — 8 — � �NJP-3020L8 .0198 0,503 � �

NJP-3014R12 .0125 0,318 .098 2,49 — — 12 — � � �NJP-3014L12 .0135 0,343 � �

NJP-3010R16 .0094 0,239 .098 2,49 — — 16 — � �NJP-3010L16 .0104 0,264 � �

NJF NJF-3012R14 .0107 0,272 .141 3,48 — — 14 — � �NJF-3012L14 .0117 0,297 � �

NJF-3010R16 .0094 0,239 .141 3,48 — — 16 — � � �NJF-3010L16 .0104 0,264 � �

NJF-3009R18 .0083 0,211 .141 3,48 — — 18 — � � �NJF-3009L18 .0093 0,236 � �

NJF-3008R20 .0075 0,190 .141 3,48 — — 20 — � � �NJF-3008L20 .0085 0,216 � �

NJF-3007R24 .0063 0,160 .141 3,48 — — 24 — � �NJF-3007L24 .0073 0,185 � �

NJF-3006R28 .0054 0,137 .141 3,48 — — 28 — � � �NJF-3006L28 .0064 0,163 � �

NJF-3005R32 .0047 0,119 .141 3,48 — — 32 — � �NJF-3005L32 .0056 0,142 � �


NJK NJK-3012R14 .0107 0,272 .141 3,48 — — 14 — � �NJK-3012L14 .0117 0,297 � �

NJK-3010R16 .0094 0,239 .141 3,48 — — 16 — � � �NJK-3010L16 .0104 0,264 � �

NJK-3009R18 .0083 0,211 .141 3,48 — — 18 — � �NJK-3009L18 .0093 0,236 � �

NJK-3008R20 .0075 0,190 .141 3,48 — — 20 — � � �NJK-3008L20 .0085 0,216 � �

NJK-3007R24 .0063 0,160 .141 3,48 — — 24 — � �NJK-3007L24 .0073 0,185 � �

NJK-3006R28 .0054 0,137 .141 3,48 — — 28 — � �NJK-3006L28 .0064 0,163 � �

NJK-3005R32 .0047 0,119 .141 3,48 — — 32 — � �NJK-3005L32 .0056 1,142 � �

76

®




tpf tpirε* e*

right hand left handinch inchmm mm


K68

K31

3

KC

5010

KC

5025

KC

5410

gradesdimensions

steel

stainless steel

non-ferrous

high-temp alloys


NDC-V (NPT)cresting-tapered pipe

NDC-38VR-75 .005 0,13 .100 2,54 .75 8 �NDC-38VL-75 �

NDC-3115VR-75 .004 0,10 .144 3,66 .75 11.5 �NDC-3115VL-75 �

NDC-314VR-75 — .003 0,08 .144 3,66 .75 14 �

NDC-318VR-75 — .003 0,08 .144. 3,66 .75 18 �

NDC-327VR-75 — .002 0,05 .144 3,66 .75 27 �

NWC NWC-3R11E .012 0,30 .151 3,84 — 11 ext. � � �NWC-3L11I 11 int. �

NWC-3R14E .009 0,24 .161 4,08 — 14 ext. � � �NWC-3L14I 14 int. � �


77

LT Laydown Threading Inserts

page

KENNA PERFECT Selection . . . . . . . . . . . 78

LT Thread Form Guide . . . . . . . . . . . . . . . . . . 80

Partial Profile . . . . . . . . . . . 84

American UN . . . . . . . . . . . . . 86

ISO Metric . . . . . . . . . . . . . . . . . 88

UNJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

NPT . . . . . . . . . . . . . . . . . . . . . . . . . 91

NPTF. . . . . . . . . . . . . . . . . . . . . . . . . 92

Partial Profile . . . . . . . . . . . . . . . . . . . . . . 93

Whitworth for BSW, BSP . . . . . . . . . 94

BSPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

60°

55°

Inserts

78


alloyssteelthreadingoperation

Recommendations for Grade and Speed Selections


KC5025 CB KC5025 CB KC5025 CB KC5025 CBexternal

100-650 sfm 150-450 sfm 150-1,000 sfm 20-250 sfm


KC5010 CB KC5010 CB KC5010 CB KC5010 CB150-650 sfm 200-650 sfm 250-1,300 sfm 80-400 sfm


KC5025 CB KC5025 CB KC5025 CB KC5025 CBinternal

100-550 sfm 150-350 sfm 150-800 sfm 20-200 sfm


KC5010 CB KC5010 CB KC5010 CB KC5010 CB150-550 sfm 200-550 sfm 250-1,100 sfm 80-325 sfm

Step 3: Select grade and speed.

What you need to know:

■ workpiece material

■ operation

5 Easy Steps to Increased LT Threading Productivity

KENNA PERFECT LT Threading System

Step 1: Select threading method and hand of tooling.


■ external/internal operation

■ spindle rotation

■ feed direction

Step 2: Select insert.


■ hand of insert

■ thread form

◆ See thread form guide on pages 80-81.

◆ Select cresting inserts for fully controlled

thread form including diameter. Cresting inserts eliminate the need

for deburring and are optimized for the best tool life at that pitch.

◆ Non-cresting partial profile inserts offer the flexibility to cut a variety of thread pitches with one insert.

LT-11NL-16UN 1/4" �LT-16NL-16UN 3/8" �

catalog number IC KC5025 KC5010

(NOTE: Use the largest insert IC possible.)

standard helix – preferred method

reverse helix

L

L

L

L

R

R

R

R

L L

L LR

R R

R

CB-style chip control inserts are not available with some threadforms. In those cases, flat top inserts can be substituted.


79


Step 4:Select the toolholder.


■ external/internal operation

■ pitch diameter (for internal operations)

■ hand of tool

■ insert IC

Step 5: Select the shim.


■ thread form (tpi or pitch)

■ pitch diameter

■ helix method

If different from shim

supplied with toolholder,

order shim separately.

(rev

erse

hel

ix)

(sta

ndar

d he

lix)

5 Easy Steps to Increased LT Threading Productivity (cont’d)

S0812-LSEL2 LT-11NL .65 —

S1212-LSEL3 LT-16NL .90 SM-YE3

catalog number gage insert min. bore dia. shim

NOTE: Optimize your threading operation by using the properinfeed angle and the recommendedinfeed values. Refer to theCatalog 1010, Technical Section,pages 677-678 and 683.

Additional shim selection guidelines can be found in the threading Technical Data Section of Catalog 1010.

80

®LT Thread Form Guide

• All LT inserts are precision ground toprovide accurate thread forms andindexing.

• Both cresting and non-cresting partialprofile inserts are specifically designedfor either external or internal threadingoperations.

• CB-style inserts provide chip controlwhich is especially important in internaloperations where stringy chips canaccumulate and cause poor finish oredge chipping.

• Cresting inserts provide a fully controlled thread form including diameter for a given pitch. The need for deburring is eliminated and theinserts are optimized for the best tool life at that pitch.

• Non-cresting partial profile inserts offerthe flexibility to cut a variety of threadpitches with one insert.

• Right-hand LT toolholders use right-hand inserts. Left-hand LT toolholdersuse left-hand inserts.

• Right-hand LT boring bars use right-hand inserts. Left-hand LT boring barsuse left-hand inserts.

external

internal

right-hand inserts left-hand inserts


LT-60CB 60° V UN 2° no size 16 = 8 - 48 size 11 = 16 - 48class 2 positive (0,5 - 3,00) (0,5 - 1,5)

ISO 6g/6H size 16 = 8 - 48(0,5 - 3,0)

pages 84-85

LT-60 60° V UN 2° no size 16 = 8 - 48 size 11 = 16 - 48class 2 positive (0,5 - 3,00) (0,5 - 1,5)

ISO 6g/6H size 16 = 8 - 48(0,5 - 3,0)

pages 84-85

60° American UN

LT-UNCB 60° V UN 2° yes each insert each insertclass 2 positive produces a produces a

specific tpi specific tpi

pages 86-87

LT-UN 60° V UN 2° yes each insert each insertclass 2 positive produces a produces a


pages 86-87

insert tpi range (pitch in mm)style thread form rake angle cresting external internal application

general purpose with chip control

• flexible form capability with chip control

• superior performance in internal threading operations

general purpose

• flexible form capability makes this insert a popular choice for general use

• provides satisfactory performance in most applications

cresting style with chip control for UN inch threads

• offers the best possible tool life and chip control for the application

• produces a high-quality surface finish and accurate thread depth

• chip control capability makes this a first choice for internal threading operations

cresting style for UN inch threads

• offers excellent tool life and surface finish, with accurate thread depth


81

LT Threading Inserts


60° ISO Metric

LT-ISOCB ISO 2° yes each insert each insert6g/6H positive produces a produces a


pages 88-89

LT-ISO ISO 2° yes each insert each insert6g/6H positive produces a produces a


pages 88-89

60° UNJ

LT-UNJ 60° V 2° yes each insert each insertUNJ class positive produces a produces a3 (3A/3B) specific tpi specific tpi

page 90

60° National Pipe Threads

LT-NPTCB 60° V 2° yes each insert each insertNPT positive produces a produces a


page 91

LT-NPT 60° V 2° yes each insert each insertNPT positive produces a produces a


page 91

LT-NPTFCB 60° V 2° yes each insert each insertNPTF positive produces a produces a


page 92

LT-NPTF 60° V 2° yes each insert each insertNPTF positive produces a produces a


page 92


cresting style with chip control for ISO metric threads



• best for internal threading operations

cresting style for ISO metric threads


cresting style for UNJ threads

• accurate radius and thread form control for excellent tool life and high-quality threads

• meets or exceeds SPEC MIL S-8879C

for National Pipe Threads with chip control

• offers the best possible tool life with accurate thread depth control

• chip control geometry helps manage chips and maintains a high-quality, unmarred surface finish

• for tapered threads where fluid tightness is required

for National Pipe Threads-Dry Seal with chip control

• offers the best tool life with accurate thread depth control

• chip control geometry helps manage chips and maintains a high-quality, unmarred surface finish

• for tapered Dry Seal threads

National Pipe Threads



National Pipe Threads-Dry Seal


• for tapered Dry Seal threads

82

®LT Threading InsertsLT Thread Form Guide


LT-55 55° V 2° no size 16 = 8 - 48 size 11 = 16 - 48positive (0,5 - 3,00) (0,5 - 1,5)

size 16 = 8 - 48(0,5 - 3,0)

page 93

55° Whitworth for BSW, BSP

LT-WCB 55° V 2° yes each insert each insertWhitworth positive produces a produces a


pages 94-95

LT-W 55° V 2° yes each insert each insertWhitworth positive produces a produces a


pages 94-95

55° BSPT

LT-BSPT 55° V 2° yes each insert each insertBSPT positive produces a produces a


page 96


general purpose for 55° thread forms

• wide flexibility to produce a variety of pitches

• provides satisfactory performance in most applications

cresting style with chip control for Whitworth threads



• best for internal threading operations

cresting style for Whitworth threads


cresting style for British Standard Pipe Threads



In all cases, remember, the proper shim selection is important!Kennametal toolholders are supplied with a shim for a 1.5° leadangle. Change the shim if your thread is more than 1° different.A complete listing of available shims can be found in both the LTtoolholder and LT boring bar section of the catalog. For more detailson proper shim selection, see the KENNA PERFECT guide at thebeginning of this section or the Technical Data section on threadingin Catalog 1010.


actual tpi or 0,5 - 4,0 48 - 8pitch in mm (metric forms)is designated

83

Kennametal Threading SystemsLT Threading Insert Identification System

ISO — ISO metricUN — American UN60 — Partial Profile non-cresting 60°55 — Partial Profile non cresting 55°W — Whitworth 55°BSPT — British Standard Pipe ThreadNPT — American National Pipe ThreadACME — American AcmeSTACME — American Stub AcmeTR — Trapez DIN 103RD — Round DIN 405UNJ — Controlled root radiusNPTF — Dry SealAPI — American Petroleum Institute ThreadsBUT — API Buttress Casing

designationthread pitch

(mm)tpi

A 0,5 - 1,5 48 - 16AG 0,5 - 3,0 48 - 8G 1,75 - 3,0 14 - 8N 3,5 - 5,0 7 - 5

partial profile

full profile

The Kennametal LT Advantage:Every box of 10 inserts includes aTorx wrench and locking screw.

LT 16 ER 20 UN CB– –

1.Type of Insert

2.Cutting Edge Length (Size)

5.Thread Profile

4.Thread Pitch

laydown threading

CB — chipbreaker□ — flat top

3.Hand of Insert

ER — external right handEL — external left handNR — internal right handNL — internal left hand

l-size(mm)

d(inch)

22 1/216 3/811 1/4

6.Chip Control

84

®LT Threading InsertsPartial Profile 60° — External

LT-ER-60CB LT-16ER-AG60CB — 3/8 48-8 0,5 - 3,0 .003 0,08 .650 .143 .155 .035 .059 � �

dright hand left hand tpithreadpitch(mm)

nose radiusrε l

inch (mm)s d1 x y

KC

5025

KC

5010

grades




steel

stainless steel

non-ferrous

high-temp alloys


LT-ER/L-60 LT-16ER-A60 3/8 48-16 0,5 - 1,5 .002 0,05 .650 .143 .155 .031 .035 � �LT-16EL-A60 3/8 48-16 0,5 - 1,5 .002 0,05 .650 .143 .155 .031 .035 �

LT-16ER-AG60 3/8 48-8 0,5 - 3,0 .003 0,08 .650 .143 .155 .047 .067 � �LT-16EL-AG60 3/8 48-8 0,5 - 3,0 .003 0,08 .650 .143 .155 .047 .067 �

LT-16ER-G60 3/8 14-8 1,75 - 3,0 .011 0,27 .650 .143 .155 .047 .067 � �LT-16EL-G60 3/8 14-8 1,75 - 3,0 .011 0,27 .650 .143 .155 .047 .067 �

85

LT Threading InsertsPartial Profile 60° — Internal




KC

5010

steel

stainless steel

non-ferrous

high-temp alloys


LT-NR-60CB LT-11NR-A60CB — 1/4 48-16 0,5 - 1,5 .002 0,05 .433 .126 .128 .024 .031 �

LT-16NR-AG60CB — 3/8 48-8 0,5 - 3,0 .002 0,05 .650 .143 .155 .035 .059 �LT-16NR-G60CB — 3/8 14-8 1,75 - 3,0 .006 0,16 .650 .143 .155 .043 .059 �

right hand left hand

KC

5025

grades

LT-NR/L-60 LT-11NR-A60 1/4 48-16 0,5 - 1,5 .002 0,05 .433 .126 .128 .031 .035 � �LT-11NL-A60 1/4 48-16 0,5 - 1,5 .002 0,05 .433 .126 .128 .031 .035 �

LT-16NR-A60 3/8 48-16 0,5 - 1,5 .002 0,05 .650 .143 .155 .031 .035 � �LT-16NL-A60 3/8 48-16 0,5 - 1,5 .002 0,05 .650 .143 .155 .031 .035 �

LT-16NR-AG60 3/8 48-8 0,5 - 3,0 .002 0,05 .650 .143 .155 .047 .067 � �LT-16NL-AG60 3/8 48-8 0,5 - 3,0 .002 0,05 .650 .143 .155 .047 .067 �

LT-16NR-G60 3/8 14-8 1,75 - 3,0 .006 0,16 .650 .143 .155 .047 .067 � �LT-16NL-G60 3/8 14-8 1,75 - 3,0 .006 0,16 .650 .143 .155 .047 .067 �

d tpithreadpitch(mm)

nose radiusrε l

inch (mm)s d1 x y

86

®LT Threading InsertsAmerican UN — External




LT-ER-UNCB LT-16ER-32UNCB — 3/8 32 .650 .143 .155 .047 .020 .019 � �LT-16ER-28UNCB — 3/8 28 .650 .143 .155 .028 .031 .022 � �LT-16ER-24UNCB — 3/8 24 .650 .143 .155 .028 .031 .026 � �LT-16ER-20UNCB — 3/8 20 .650 .143 .155 .028 .031 .031 � �LT-16ER-18UNCB — 3/8 18 .650 .143 .155 .028 .031 .034 � �LT-16ER-16UNCB — 3/8 16 .650 .143 .155 .028 .031 .038 � �LT-16ER-14UNCB — 3/8 14 .650 .143 .155 .047 .059 .044 � �LT-16ER-12UNCB — 3/8 12 .650 .143 .155 .047 .059 .051 � �LT-16ER-10UNCB — 3/8 10 .650 .143 .155 .047 .059 .061 � �LT-16ER-8UNCB — 3/8 8 .650 .143 .155 .051 .059 .077 � �

dright hand left hand tpi l s d1 x y hmin

KC

5025

KC

5010

grades

steel

stainless steel

non-ferrous

high-temp alloys


LT-ER/L-UN LT-16ER-48UN 3/8 48 .650 .143 .155 .024 .024 .013 �LT-16EL-48UN 3/8 48 .650 .143 .155 .024 .024 .013 �

LT-16ER-40UN 3/8 40 .650 .143 .155 .024 .024 .015 �LT-16EL-40UN 3/8 40 .650 .143 .155 .024 .024 .015 �

LT-16ER-36UN 3/8 36 .650 .143 .155 .024 .024 .017 �LT-16EL-36UN 3/8 36 .650 .143 .155 .024 .024 .017 �

LT-16ER-32UN 3/8 32 .650 .143 .155 .024 .024 .019 � �LT-16EL-32UN 3/8 32 .650 .143 .155 .024 .024 .019 �

LT-16ER-28UN 3/8 28 .650 .143 .155 .024 .027 .022 � �LT-16EL-28UN 3/8 28 .650 .143 .155 .024 .027 .022 �

LT-16ER-24UN 3/8 24 .650 .143 .155 .027 .031 .026 � �LT-16EL-24UN 3/8 24 .650 .143 .155 .027 .031 .026 �

LT-16ER-20UN 3/8 20 .650 .143 .155 .031 .035 .031 � �LT-16EL-20UN 3/8 20 .650 .143 .155 .031 .035 .031 �

LT-16ER-18UN 3/8 18 .650 .143 .155 .031 .039 .034 � �LT-16EL-18UN 3/8 18 .650 .143 .155 .031 .039 .034 �

LT-16ER-16UN 3/8 16 .650 .143 .155 .035 .043 .038 � �LT-16EL-16UN 3/8 16 .650 .143 .155 .035 .043 .038 �

LT-16ER-14UN 3/8 14 .650 .143 .155 .039 .047 .044 � �LT-16EL-14UN 3/8 14 .650 .143 .155 .039 .047 .044 �

LT-16ER-12UN 3/8 12 .650 .143 .155 .043 .055 .051 � �LT-16EL-12UN 3/8 12 .650 .143 .155 .043 .055 .051 �

LT-16ER-10UN 3/8 10 .650 .143 .155 .043 .059 .061 �LT-16EL-10UN 3/8 10 .650 .143 .155 .043 .059 .061 �

LT-16ER-8UN 3/8 8 .650 .143 .155 .047 .063 .077 �LT-16EL-8UN 3/8 8 .650 .143 .155 .047 .063 .077 �

Standard:ANSI B1.1:74Tolerance Class:2A/2B


87




LT-NR-UNCB LT-11NR-36UNCB — 1/4 36 .433 .126 .128 .047 .020 .016 �LT-11NR-32UNCB — 1/4 32 .433 .126 .128 .047 .020 .018 �LT-11NR-28UNCB — 1/4 28 .433 .126 .128 .028 .031 .020 �LT-11NR-24UNCB — 1/4 24 .433 .126 .128 .028 .031 .024 �LT-11NR-20UNCB — 1/4 20 .433 .126 .128 .028 .031 .029 �LT-11NR-18UNCB — 1/4 18 .433 .126 .128 .028 .031 .032 �LT-11NR-16UNCB — 1/4 16 .433 .126 .128 .028 .031 .036 �

LT-16NR-20UNCB — 3/8 20 .650 .143 .155 .028 .031 .029 �LT-16NR-18UNCB — 3/8 18 .650 .143 .155 .028 .031 .032 �LT-16NR-16UNCB — 3/8 16 .650 .143 .155 .028 .031 .036 �LT-16NR-14UNCB — 3/8 14 .650 .143 .155 .047 .059 .041 �LT-16NR-12UNCB — 3/8 12 .650 .143 .155 .047 .059 .048 �LT-16NR-10UNCB — 3/8 10 .650 .143 .155 .047 .059 .058 �LT-16NR-8UNCB — 3/8 8 .650 .143 .155 .051 .059 .072 �


KC

5025

KC

5010

grades

steel

stainless steel

non-ferrous

high-temp alloys

LT-NR/L-UN LT-11NR-44UN 1/4 44 .433 .126 .128 .024 .024 .013 �LT-11NL-44UN 1/4 44 .433 .126 .128 .024 .024 .013 �

LT-11NR-40UN 1/4 40 .433 .126 .128 .024 .024 .015 �LT-11NL-40UN 1/4 40 .433 .126 .128 .024 .024 .015 �

LT-11NR-36UN 1/4 36 .433 .126 .128 .024 .024 .016 �LT-11NL-36UN 1/4 36 .433 .126 .128 .024 .024 .016 �

LT-11NR-32UN 1/4 32 .433 .126 .128 .024 .024 .018 �LT-11NL-32UN 1/4 32 .433 .126 .128 .024 .024 .018 �

LT-11NR-28UN 1/4 28 .433 .126 .128 .024 .027 .021 �LT-11NL-28UN 1/4 28 .433 .126 .128 .024 .027 .021 �

LT-11NR-24UN 1/4 24 .433 .126 .128 .027 .031 .024 �LT-11NL-24UN 1/4 24 .433 .126 .128 .027 .031 .024 �

LT-11NR-20UN 1/4 20 .433 .126 .128 .031 .035 .029 �LT-11NL-20UN 1/4 20 .433 .126 .128 .031 .035 .029 �

LT-11NR-18UN 1/4 18 .433 .126 .128 .031 .039 .032 �LT-11NL-18UN 1/4 18 .433 .126 .128 .031 .039 .032 �

LT-11NR-16UN 1/4 16 .433 .126 .128 .035 .043 .036 � �LT-11NL-16UN 1/4 16 .433 .126 .128 .035 .043 .036 �

LT-16NR-48UN 3/8 48 .650 .143 .155 .024 .024 .012 �LT-16NL-48UN 3/8 48 .650 .143 .155 .024 .024 .012 �

LT-16NR-40UN 3/8 40 .650 .143 .155 .024 .024 .015 �LT-16NL-40UN 3/8 40 .650 .143 .155 .024 .024 .015 �

LT-16NR-36UN 3/8 36 .650 .143 .155 .024 .024 .016 �LT-16NL-36UN 3/8 36 .650 .143 .155 .024 .024 .016 �

LT-16NR-32UN 3/8 32 .650 .143 .155 .024 .024 .020 �LT-16NL-32UN 3/8 32 .650 .143 .155 .024 .024 .020 �

LT-16NR-28UN 3/8 28 .650 .143 .155 .024 .027 .020 �LT-16NL-28UN 3/8 28 .650 .143 .155 .024 .027 .020 �

LT-16NR-24UN 3/8 24 .650 .143 .155 .027 .031 .024 �LT-16NL-24UN 3/8 24 .650 .143 .155 .027 .031 .024 �

LT-16NR-20UN 3/8 20 .650 .143 .155 .031 .035 .029 �LT-16NL-20UN 3/8 20 .650 .143 .155 .031 .035 .029 �

LT-16NR-18UN 3/8 18 .650 .143 .155 .031 .039 .032 �LT-16NL-18UN 3/8 18 .650 .143 .155 .031 .039 .032 �

LT-16NR-16UN 3/8 16 .650 .143 .155 .035 .043 .036 �LT-16NL-16UN 3/8 16 .650 .143 .155 .035 .043 .036 �

LT-16NR-14UN 3/8 14 .650 .143 .155 .035 .047 .041 �LT-16NL-14UN 3/8 14 .650 .143 .155 .035 .047 .041 �

LT-16NR-12UN 3/8 12 .650 .143 .155 .043 .055 .048 � �LT-16NL-12UN 3/8 12 .650 .143 .155 .043 .055 .048 �

LT-16NR-10UN 3/8 10 .650 .143 .155 .043 .059 .058 �LT-16NL-10UN 3/8 10 .650 .143 .155 .043 .059 .058 �

LT-16NR-8UN 3/8 8 .650 .143 .155 .043 .059 .072 � �LT-16NL-8UN 3/8 8 .650 .143 .155 .043 .059 .072 �

Standard:ANSI B1.1:74Tolerance Class:2A/2B


American UN — Internal

88

®LT Threading Inserts





LT-ER-ISOCB LT-16ER-0.5ISOCB — 3/8 0,5 .650 .143 .155 .047 .024 .012 � �LT-16ER-0.75ISOCB — 3/8 0,75 .650 .143 .155 .047 .024 .018 � �LT-16ER-1.0ISOCB — 3/8 1,0 .650 .143 .155 .028 .031 .024 � �LT-16ER-1.25ISOCB — 3/8 1,25 .650 .143 .155 .043 .031 .030 � �LT-16ER-1.5ISOCB — 3/8 1,5 .650 .143 .155 .028 .031 .036 � �LT-16ER-1.75ISOCB — 3/8 1,75 .650 .143 .155 .047 .059 .042 � �LT-16ER-2.0ISOCB — 3/8 2,0 .650 .143 .155 .047 .059 .048 � �LT-16ER-2.5ISOCB — 3/8 2,5 .650 .143 .155 .047 .059 .060 � �LT-16ER-3.0ISOCB — 3/8 3,0 .650 .143 .155 .051 .059 .072 � �

dright hand left handthreadpitch(mm)

l s d1 x y hmin

KC

5025

KC

5010

grades

steel

stainless steel

non-ferrous

high-temp alloys

LT-ER/L-ISO LT-16ER-0.5ISO 3/8 0,5 .650 .143 .155 .024 .024 .012 �LT-16EL-0.5ISO 3/8 0,5 .650 .143 .155 .024 .024 .012 �

LT-16ER-0.75ISO 3/8 0,75 .650 .143 .155 .024 .024 .018 �LT-16EL-0.75ISO 3/8 0,75 .650 .143 .155 .024 .024 .018 �

LT-16ER-1.0ISO 3/8 1,0 .650 .143 .155 .027 .027 .024 � �LT-16EL-1.0ISO 3/8 1,0 .650 .143 .155 .027 .027 .024 �

LT-16ER-1.25ISO 3/8 1,25 .650 .143 .155 .031 .035 .030 � �LT-16EL-1.25ISO 3/8 1,25 .650 .143 .155 .031 .035 .030 �

LT-16ER-1.5ISO 3/8 1,5 .650 .143 .155 .031 .039 .036 � �LT-16EL-1.5ISO 3/8 1,5 .650 .143 .155 .031 .039 .036 � �

LT-16ER-1.75ISO 3/8 1,75 .650 .143 .155 .035 .047 .042 � �LT-16EL-1.75ISO 3/8 1,75 .650 .143 .155 .035 .047 .042 �

LT-16ER-2.0ISO 3/8 2,0 .650 .143 .155 .039 .051 .048 � �LT-16EL-2.0ISO 3/8 2,0 .650 .143 .155 .039 .051 .048 �

LT-16ER-2.5ISO 3/8 2,5 .650 .143 .155 .043 .059 .060 � �LT-16EL-2.5ISO 3/8 2,5 .650 .143 .155 .043 .059 .060 �

LT-16ER-3.0ISO 3/8 3,0 .650 .143 .155 .047 .063 .072 � �LT-16EL-3.0ISO 3/8 3,0 .650 .143 .155 .047 .063 .072 �

ISO Metric — External

Standard:R262 (DIN 13)Tolerance Class:6g/6H

89






LT-NR-ISOCB LT-11NR-0.5ISOCB — 1/4 0,5 .433 .126 .128 .047 .024 .012 �LT-11NR-0.75ISOCB — 1/4 0,75 .433 .126 .128 .047 .024 .018 �LT-11NR-1.0ISOCB — 1/4 1,0 .433 .126 .128 .028 .031 .024 �LT-11NR-1.25ISOCB — 1/4 1,25 .433 .126 .128 .028 .031 .030 �LT-11NR-1.5ISOCB — 1/4 1,5 .433 .126 .128 .028 .031 .036 �

LT-16NR-1.0ISOCB — 3/8 1,0 .650 .143 .155 .028 .031 .024 �LT-16NR-1.25ISOCB — 3/8 1,25 .650 .143 .155 .028 .031 .030 �LT-16NR-1.5ISOCB — 3/8 1,5 .650 .143 .155 .028 .031 .036 �LT-16NR-1.75ISOCB — 3/8 1,75 .650 .143 .155 .047 .059 .042 �LT-16NR-2.0ISOCB — 3/8 2,0 .650 .143 .155 .047 .059 .048 �LT-16NR-2.5ISOCB — 3/8 2,5 .650 .143 .155 .047 .059 .060 �

dright hand left handthreadpitch(mm)

l s d1 x y hmin

KC

5025

KC

5010

grades

steel

stainless steel

non-ferrous

high-temp alloys

LT-NR/L-ISO LT-11NR-0.5ISO 1/4 0,5 .433 .126 .128 .024 .024 .012 �LT-11NL-0.5ISO 1/4 0,5 .433 .126 .128 .024 .024 .012 �

LT-11NR-0.75ISO 1/4 0,75 .433 .126 .128 .024 .024 .018 �LT-11NL-0.75ISO 1/4 0,75 .433 .126 .128 .024 .024 .018 �

LT-11NR-1.0ISO 1/4 1,0 .433 .126 .128 .024 .027 .024 �LT-11NL-1.0ISO 1/4 1,0 .433 .126 .128 .024 .027 .024 �

LT-11NR-1.25ISO 1/4 1,25 .433 .126 .128 .031 .035 .030 �LT-11NL-1.25ISO 1/4 1,25 .433 .126 .128 .031 .035 .030 �

LT-11NR-1.5ISO 1/4 1,5 .433 .126 .128 .031 .039 .036 � �LT-11NL-1.5ISO 1/4 1,5 .433 .126 .128 .031 .039 .036 �

LT-11NR-1.75ISO 1/4 1,75 .433 .126 .128 .035 .043 .042 �LT-11NL-1.75ISO 1/4 1,75 .433 .126 .128 .035 .043 .042 �

LT-11NR-2.0ISO 1/4 2,0 .433 .126 .128 .035 .043 .048 �LT-11NL-2.0ISO 1/4 2,0 .433 .126 .128 .035 .043 .048 �

LT-16NR-0.5ISO 3/8 0,5 .650 .143 .155 .024 .024 .012 �LT-16NL-0.5ISO 3/8 0,5 .650 .143 .155 .024 .024 .012 �

LT-16NR-0.75ISO 3/8 0,75 .650 .143 .155 .024 .024 .018 �LT-16NL-0.75ISO 3/8 0,75 .650 .143 .155 .024 .024 .018 �

LT-16NR-1.0ISO 3/8 1,0 .650 .143 .155 .024 .027 .024 � �LT-16NL-1.0ISO 3/8 1,0 .650 .143 .155 .024 .027 .024 �

LT-16NR-1.25ISO 3/8 1,25 .650 .143 .155 .031 .035 .030 �LT-16NL-1.25ISO 3/8 1,25 .650 .143 .155 .031 .035 .030 �

LT-16NR-1.5ISO 3/8 1,5 .650 .143 .155 .031 .039 .036 � �LT-16NL-1.5ISO 3/8 1,5 .650 .143 .155 .031 .039 .036 �

LT-16NR-1.75ISO 3/8 1,75 .650 .143 .155 .035 .047 .042 �LT-16NL-1.75ISO 3/8 1,75 .650 .143 .155 .035 .047 .042 �

LT-16NR-2.0ISO 3/8 2,0 .650 .143 .155 .039 .051 .048 � �LT-16NL-2.0ISO 3/8 2,0 .650 .143 .155 .039 .051 .048 �

LT-16NR-2.5ISO 3/8 2,5 .650 .143 .155 .043 .059 .060 �LT-16NL-2.5ISO 3/8 2,5 .650 .143 .155 .043 .059 .060 �

LT-16NR-3.0ISO 3/8 3,0 .650 .143 .155 .043 .059 .072 � �LT-16NL-3.0ISO 3/8 3,0 .650 .143 .155 .043 .059 .072 �

Standard:R262 (DIN 13)Tolerance Class:6g/6H

ISO Metric — Internal

90






LT-ER/L-UNJ LT-16ER-32UNJ 3/8 32 .650 .143 .155 .024 .027 .018 �LT-16EL-32UNJ 3/8 32 .650 .143 .155 .024 .027 .018 �

LT-16ER-28UNJ 3/8 28 .650 .143 .155 .027 .027 .020 �LT-16EL-28UNJ 3/8 28 .650 .143 .155 .027 .027 .020 �

LT-16ER-24UNJ 3/8 24 .650 .143 .155 .027 .031 .024 �LT-16EL-24UNJ 3/8 24 .650 .143 .155 .027 .031 .024 �

LT-16ER-20UNJ 3/8 20 .650 .143 .155 .031 .035 .029 � �LT-16EL-20UNJ 3/8 20 .650 .143 .155 .031 .035 .029 �

LT-16ER-18UNJ 3/8 18 .650 .143 .155 .031 .039 .032 � �LT-16EL-18UNJ 3/8 18 .650 .143 .155 .031 .039 .032 �

LT-16ER-16UNJ 3/8 16 .650 .143 .155 .035 .043 .036 � �LT-16EL-16UNJ 3/8 16 .650 .143 .155 .035 .043 .036 �

LT-16ER-14UNJ 3/8 14 .650 .143 .155 .039 .047 .041 � �LT-16EL-14UNJ 3/8 14 .650 .143 .155 .039 .047 .041 �

LT-16ER-12UNJ 3/8 12 .650 .143 .155 .043 .051 .048 � �LT-16EL-12UNJ 3/8 12 .650 .143 .155 .043 .051 .048 �

LT-16ER-10UNJ 3/8 10 .650 .143 .155 .047 .059 .058 �LT-16EL-10UNJ 3/8 10 .650 .143 .155 .047 .059 .058 �

LT-16ER-8UNJ 3/8 8 .650 .143 .155 .047 .063 .072 �LT-16EL-8UNJ 3/8 8 .650 .143 .155 .047 .063 .072 �


KC

5025

KC

5010

grades

steel

stainless steel

non-ferrous

high-temp alloys

UNJ — External

UNJ — Internal

LT-NR/L-UNJ LT11NR20UNJ 1/4 20 .433 .126 .128 .031 .035 .029 �LT11NL20UNJ 1/4 20 .433 .126 .128 .031 .035 .029 �

LT11NR18UNJ 1/4 18 .433 .126 .128 .031 .039 .032 �LT11NL18UNJ 1/4 18 .433 .126 .128 .031 .039 .032 �

LT11NR16UNJ 1/4 16 .433 .126 .128 .035 .043 .036 �LT11NL16UNJ 1/4 16 .433 .126 .128 .035 .043 .036 �

LT11NR14UNJ 1/4 14 .433 .126 .128 .035 .047 .041 �LT11NL14UNJ 1/4 14 .433 .126 .128 .035 .047 .041 �

LT16NR32UNJ 3/8 32 .650 .143 .155 .024 .028 .018 �LT16NL32UNJ 3/8 32 .650 .143 .155 .024 .028 .018 �

LT16NR28UNJ 3/8 28 .650 .143 .155 .028 .028 .020 �LT16NL28UNJ 3/8 28 .650 .143 .155 .028 .028 .020 �

LT16NR24UNJ 3/8 24 .650 .143 .155 .028 .031 .024 �LT16NL24UNJ 3/8 24 .650 .143 .155 .028 .031 .024 �

LT16NR20UNJ 3/8 20 .650 .143 .155 .031 .035 .029 �LT16NL20UNJ 3/8 20 .650 .143 .155 .031 .035 .029 �

LT16NR18UNJ 3/8 18 .650 .143 .155 .031 .039 .032 �LT16NL18UNJ 3/8 18 .650 .143 .155 .031 .039 .032 �

LT16NR16UNJ 3/8 16 .650 .143 .155 .035 .043 .036 �LT16NL16UNJ 3/8 16 .650 .143 .155 .035 .043 .036 �

LT16NR14UNJ 3/8 14 .650 .143 .155 .039 .047 .041 �LT16NL14UNJ 3/8 14 .650 .143 .155 .039 .047 .041 �

LT16NR12UNJ 3/8 12 .650 .143 .155 .043 .051 .048 �LT16NL12UNJ 3/8 12 .650 .143 .155 .043 .051 .048 �

LT16NR10UNJ 3/8 10 .650 .143 .155 .047 .059 .058 �LT16NL10UNJ 3/8 10 .650 .143 .155 .047 .059 .058 �

LT16NR8UNJ 3/8 8 .650 .143 .155 .047 .063 .072 �LT16NL8UNJ 3/8 8 .650 .143 .155 .047 .063 .072 �

dright hand left hand tpi l s d1 x y

grades

hmin

KC

5025

KC

5010

Standard:MIL-S-8879CTolerance Class:3A/3B

91



steel

stainless steel

non-ferrous

high-temp alloys

NPT — External




LT-ER-NPTCB LT-16ER-14NPTCB — 3/8 14 .75 .650 .143 .155 .047 .059 .052 � �

dright hand left hand tpitaper

per foot(tpf)

l s d1 x y

KC

5025

KC

5010

KC

5010

grades

LT-ER/L-NPT LT-16ER-27NPT 3/8 27 .75 .650 .143 .155 .027 .031 .026 �LT-16EL-27NPT 3/8 27 .75 .650 .143 .155 .027 .031 .026 �

LT-16ER-18NPT 3/8 18 .75 .650 .143 .155 .031 .039 .040 � �LT-16EL-18NPT 3/8 18 .75 .650 .143 .155 .031 .039 .040 �

LT-16ER-14NPT 3/8 14 .75 .650 .143 .155 .035 .047 .052 � �LT-16EL-14NPT 3/8 14 .75 .650 .143 .155 .035 .047 .052 �

LT-16ER-11.5NPT 3/8 11.5 .75 .650 .143 .155 .043 .059 .065 � �LT-16EL-11.5NPT 3/8 11.5 .75 .650 .143 .155 .043 .059 .065 �

LT-16ER-8NPT 3/8 8 .75 .650 .143 .155 .051 .071 .095 �LT-16EL-8NPT 3/8 8 .75 .650 .143 .155 .051 .071 .095 �

NPT — Internal

LT-NR-NPTCB LT-16NR-14NPTCB — 3/8 14 .75 .650 .143 .155 .043 .059 .052 �LT-16NR-11.5NPTCB — 3/8 11.5 .75 .650 .143 .155 .039 .059 .065 �

dright hand left hand tpitaper

per foot(tpf)

l s d1 x y

KC

5025

grades

LT-NR/L-NPT LT-11NR-27NPT 1/4 27 .75 .433 .126 .128 .027 .031 .026 �LT-11NL-27NPT 1/4 27 .75 .433 .126 .128 .027 .031 .026 �

LT-11NR-18NPT 1/4 18 .75 .433 .126 .128 .031 .039 .040 �LT-11NL-18NPT 1/4 18 .75 .433 .126 .128 .031 .039 .040 �

LT-11NR-14NPT 1/4 14 .75 .433 .126 .128 .031 .039 .052 � �LT-11NL-14NPT 1/4 14 .75 .433 .126 .128 .031 .039 .052 �

LT-16NR-27NPT 3/8 27 .75 .650 .143 .155 .027 .031 .026 �LT-16NL-27NPT 3/8 27 .75 .650 .143 .155 .027 .031 .026 �

LT-16NR-18NPT 3/8 18 .75 .650 .143 .155 .031 .039 .040 �LT-16NL-18NPT 3/8 18 .75 .650 .143 .155 .031 .039 .040 �

LT-16NR-14NPT 3/8 14 .75 .650 .143 .155 .035 .047 .052 � �LT-16NL-14NPT 3/8 14 .75 .650 .143 .155 .035 .047 .052 �

LT-16NR-11.5NPT 3/8 11.5 .75 .650 .143 .155 .043 .059 .065 � �LT-16NL-11.5NPT 3/8 11.5 .75 .650 .143 .155 .043 .059 .065 �

LT-16NR-8NPT 3/8 8 .75 .650 .143 .155 .051 .071 .095 �LT-16NL-8NPT 3/8 8 .75 .650 .143 .155 .051 .071 .095 �

Standard:USAS B2.1:1968Tolerance Class:Standard NPT

hmin

hmin

92



NPTF — External

steel

stainless steel

non-ferrous

high-temp alloys




LT-ER-NPTFCB LT-16ER-11.5NPTFCB — 3/8 11.5 .75 .650 .143 .155 .043 .059 .064 � �

right hand left hand d tpitaper

per foot(tpf)

l s d1 x y

KC

5025

KC

5010

KC

5010

grades

LT-ER/L-NPTF LT-16ER-14NPTF 3/8 14 .75 .650 .143 .155 .035 .047 .053 �LT-16EL-14NPTF 3/8 14 .75 .650 .143 .155 .035 .047 .053 �

LT-16ER-11.5NPTF 3/8 11.5 .75 .650 .143 .155 .043 .059 .453 �LT-16EL-11.5NPTF 3/8 11.5 .75 .650 .143 .155 .043 .059 .453 �

NPTF — Internal

LT-NR/L-NPTF LT-11NR-14NPTF 1/4 14 .75 .433 .126 .128 .031 .039 .053 �LT-11NL-14NPTF 1/4 14 .75 .433 .126 .128 .031 .039 .053 �

LT-16NR-14NPTF 3/8 14 .75 .650 .143 .155 .035 .047 .053 �LT-16NL-14NPTF 3/8 14 .75 .650 .143 .155 .035 .047 .053 �

LT-16NR-11.5NPTF 3/8 11.5 .75 .650 .143 .155 .043 .059 .064 �LT-16NL-11.5NPTF 3/8 11.5 .75 .650 .143 .155 .043 .059 .064 �


KC

5025

grades

hmin

Standard:ANSI B1.20.3-1976Tolerance Class:Class 2

d tpitaper

per foot(tpf)

l s d1 x y hmin

93



Partial Profile 55° — External




LT-ER/L- 55 LT-16ER-A55 3/8 48-16 0,5 - 1,5 .002 0,05 .650 .143 .155 .031 .035 �LT-16EL-A55 3/8 48-16 0,5 - 1,5 .002 0,05 .650 .143 .155 .031 .035 �

LT-16ER-AG55 3/8 48-8 0,5 - 3,0 .003 0,07 .650 .143 .155 .047 .067 � �LT-16EL-AG55 3/8 48-8 0,5 - 3,0 .003 0,07 .650 .143 .155 .047 .067 �

LT-16ER-G55 3/8 14-8 1,75 - 3,0 .008 0,21 .650 .143 .155 .047 .067 �LT-16EL-G55 3/8 14-8 1,75 - 3,0 .008 0,21 .650 .143 .155 .047 .067 �


nose radiusrε l

inch (mm)s d1 x y

KC

5025

KC

5010

KC

5010

grades

steel

stainless steel

non-ferrous

high-temp alloys

Partial Profile 55° — Internal

LT-NR/L-55 LT-11NR-A55 1/4 48-16 0,5 - 1,5 .002 0,05 .433 .126 .128 .031 .035 �LT-11NL-A55 1/4 48-16 0,5 - 1,5 .002 0,05 .433 .126 .128 .031 .035 �

LT-16NR-A55 3/8 48-16 0,5 - 1,5 .002 0,05 .650 .143 .155 .031 .035 �LT-16NL-A55 3/8 48-16 0,5 - 1,5 .002 0,05 .650 .143 .155 .031 .035 �

LT-16NR-AG55 3/8 48-8 0,5 - 3,0 .003 0,07 .650 .143 .155 .047 .067 �LT-16NL-AG55 3/8 48-8 0,5 - 3,0 .003 0,07 .650 .143 .155 .047 .067 �

LT-16NR-G55 3/8 14-8 1,75 - 3,0 .008 0,21 .650 .143 .155 .047 .067 �LT-16NL-G55 3/8 14-8 1,75 - 3,0 .008 0,21 .650 .143 .155 .047 .067 �


KC

5025

gradesnose radiusrε l

inch (mm)s d1 x y

94






LT-ER-WCB LT-16ER-14WCB — 3/8 14 .650 .143 .155 .051 .059 .046 � �LT-16ER-11WCB — 3/8 11 .650 .143 .155 .051 .059 .058 � �


KC

5025

KC

5010

grades

steel

stainless steel

non-ferrous

high-temp alloys

LT-ER/L-W LT-16ER-28W 3/8 28 .650 .143 .155 .024 .027 .023 �LT-16EL-28W 3/8 28 .650 .143 .155 .024 .027 .023 �

LT-16ER-24W 3/8 24 .650 .143 .155 .028 .031 .027 �LT-16EL-24W 3/8 24 .650 .143 .155 .028 .031 .027 �

LT-16ER-20W 3/8 20 .650 .143 .155 .031 .035 .032 �LT-16EL-20W 3/8 20 .650 .143 .155 .031 .035 .032 �

LT-16ER-19W 3/8 19 .650 .143 .155 .031 .039 .034 � �LT-16EL-19W 3/8 19 .650 .143 .155 .031 .039 .034 �

LT-16ER-18W 3/8 18 .650 .143 .155 .031 .039 .035 �LT-16EL-18W 3/8 18 .650 .143 .155 .031 .039 .035 �

LT-16ER-16W 3/8 16 .650 .143 .155 .035 .043 .040 �LT-16EL-16W 3/8 16 .650 .143 .155 .035 .043 .040 �

LT-16ER-14W 3/8 14 .650 .143 .155 .039 .047 .046 � �LT-16EL-14W 3/8 14 .650 .143 .155 .039 .047 .046 �

LT-16ER-12W 3/8 12 .650 .143 .155 .043 .055 .054 �LT-16EL-12W 3/8 12 .650 .143 .155 .043 .055 .054 �

LT-16ER-11W 3/8 11 .650 .143 .155 .043 .059 .058 � �LT-16EL-11W 3/8 11 .650 .143 .155 .043 .059 .058 �

LT-16ER-10W 3/8 10 .650 .143 .155 .043 .059 .064 �LT-16EL-10W 3/8 10 .650 .143 .155 .043 .059 .064 �

LT-16ER-9W 3/8 9 .650 .143 .155 .047 .067 .071 �LT-16EL-9W 3/8 9 .650 .143 .155 .047 .067 .071 �

LT-16ER-8W 3/8 8 .650 .143 .155 .047 .059 .080 �LT-16EL-8W 3/8 8 .650 .143 .155 .047 .059 .080 �

Whitworth BSW, BSP — External

Standard:B.S.84:1956, DIN 259,ISO228/1:1982Tolerance Class:Medium Class A

95



Whitworth BSW, BSP — Internal




LT-NR-WCB LT-16NR-14WCB — 3/8 14 .650 .143 .155 .051 .059 .046 �LT-16NR-11WCB — 3/8 11 .650 .143 .155 .051 .059 .058 �


KC

5025

KC

5010

grades

steel

stainless steel

non-ferrous

high-temp alloys

LT-NR/L-W LT-11NR-19W 1/4 19 .433 .126 .128 .031 .039 .034 �LT-11NL-19W 1/4 19 .433 .126 .128 .031 .039 .034 �

LT-11NR-14W 1/4 14 .433 .126 .128 .035 .043 .046 �LT-11NL-14W 1/4 14 .433 .126 .128 .035 .043 .046 �

LT-16NR-20W 3/8 20 .650 .143 .155 .031 .035 .032 �LT-16NL-20W 3/8 20 .650 .143 .155 .031 .035 .032 �

LT-16NR-19W 3/8 19 .650 .143 .155 .031 .039 .034 �LT-16NL-19W 3/8 19 .650 .143 .155 .031 .039 .034 �

LT-16NR-18W 3/8 18 .650 .143 .155 .031 .039 .035 �LT-16NL-18W 3/8 18 .650 .143 .155 .031 .039 .035 �

LT-16NR-16W 3/8 16 .650 .143 .155 .035 .043 .040 �LT-16NL-16W 3/8 16 .650 .143 .155 .035 .043 .040 �

LT-16NR-14W 3/8 14 .650 .143 .155 .039 .047 .046 �LT-16NL-14W 3/8 14 .650 .143 .155 .039 .047 .046 �

LT-16NR-12W 3/8 12 .650 .143 .155 .043 .055 .054 �LT-16NL-12W 3/8 12 .650 .143 .155 .043 .055 .054 �

LT-16NR-11W 3/8 11 .650 .143 .155 .043 .059 .058 � �LT-16NL-11W 3/8 11 .650 .143 .155 .043 .059 .058 �

LT-16NR-10W 3/8 10 .650 .143 .155 .043 .059 .064 �LT-16NL-10W 3/8 10 .650 .143 .155 .043 .059 .064 �

LT-16NR-9W 3/8 9 .650 .143 .155 .047 .067 .071 �LT-16NL-9W 3/8 9 .650 .143 .155 .047 .067 .071 �

LT-16NR-8W 3/8 8 .650 .143 .155 .047 .059 .080 �LT-16NL-8W 3/8 8 .650 .143 .155 .047 .059 .080 �

Standard:B.S.84:1956, DIN 259,ISO228/1:1982Tolerance Class:Medium Class A

96


NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of O.D. toolholders, I.D. boring bars and inserts.

BSPT — External

LT-ER/L-BSPT LT-16ER-14BSPT 3/8 14 .75 .650 .143 .155 .039 .047 .046 �LT-16EL-14BSPT 3/8 14 .75 .650 .143 .155 .039 .047 .046 �

LT-16ER-11BSPT 3/8 11 .75 .650 .143 .155 .043 .059 .058 �LT-16EL-11BSPT 3/8 11 .75 .650 .143 .155 .043 .059 .058 �

right hand left hand d tpitaper

per foot(tpf)

l s d1 x y

KC

5025

KC

5010

grades

hmin

Standard:B.S.21:1985Tolerance Class:Standard BSPT

steel

stainless steel

non-ferrous

high-temp alloys




KC

5010

steel

stainless steel

non-ferrous

high-temp alloys




BSPT — Internal

LT-NR/L-BSPT LT-11NR-14BSPT 1/4 14 .75 .433 .126 .128 .035 .039 .046 �LT-11NL-14BSPT 1/4 14 .75 .433 .126 .128 .035 .039 .046 �

LT-16NR-14BSPT 3/8 14 .75 .650 .143 .155 .039 .047 .046 �LT-16NL-14BSPT 3/8 14 .75 .650 .143 .155 .039 .047 .046 �

LT-16NR-11BSPT 3/8 11 .75 .650 .143 .155 .043 .059 .058 �LT-16NL-11BSPT 3/8 11 .75 .650 .143 .155 .043 .059 .058 �


KC

5025

grades

d tpitaper

per foot(tpf)

l s d1 x y hmin

97

Top Notch Grooving. . . . . . . . . . . . . . . . . 98

KENNA PERFECT Selection Guide. . . 98

Grooving Application Guide . . . . . . . . . . 100

Insert ID System. . . . . . . . . . . . . . . . . . . . . . 103

Top Notch Grooving Inserts . . . . . . . . . . . . . 104

A3 Deep Grooving. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

KENNA PERFECT Selection Guide. . . . . . . . . . 111

Insert ID System . . . . . . . . . . . . . . . . . . . . . . . . 114

A3 Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

A2 Cutoff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

Grooving Inserts

page

Top Notch Threading and Grooving Toolholders . . . . . . . . . . . . . . . . see page 172Top Notch Threading and Grooving Boring Bars . . . . . . . . . . . . . . . see pages 190-193A3 Toolholders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see pages 174-175Grooving Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see pages 697-704 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . in Catalog 1010

98

5 Easy Steps to Greater Productivity!

STEP 2:Choose your toolholder based on the application. Please note that holders

are available in conventional square shank as well as quick-change versions.

Take special note of the insert size based on the groove width.

■ For OD grooving and face grooving, see page 172.

■ For ID grooving applications, see pages 191-193.

STEP 1:Choose Top Notch for groove depths of 1.5 times the width or less.

For deep grooving, choose the A3 System on page 111.

STEP 3:Select the proper chipbreaker and feed rate for the application and

material to be machined. See table below. Note for future reference.

steel stainless steel non-ferrous high-temp

alloys

NG... K NG... K NGP... NG... K

.003 - .011 .0025 - .008 .004 - .012 .0025 - .008(0,08 - 0,28) (0,07 - 0,20) (0,01 - 0,30) (0,07 - 0,20)

NG... NGP... NG... K NGP....004 - .012 .004 - .009 .003 - .012 .004 - .008

(0,10 - 0,30) (0,10 - 0,23) (0,08 - 0,30) (0,10 - 0,20)

A3 Chipbreakers & Feed Ratesworkpiece material

application example

Top Notch Chipbreakers and Feed Rates – in/rev (mm/rev)

KENNA PERFECTTop Notch® GroovingKENNA PERFECTTop Notch® Grooving

NG...Grooving Inserts

NG...KGrooving Inserts

NGP...Grooving Inserts


99


STEP 4:Choose grade and speed based on the material

and cutting conditions to be encountered.

STEP 5: Select insert and holder from catalog pages which meet the above criteria.

Note the insert size. Match the size to your toolholder selection.

For example: Insert: . . . . . . NG-3125RKGrade:. . . . . . KC5010Width: . . . . . . .125 Insert Size: . . 3

Congratulations! You have successfully maximized productivity by selecting the best Top Notch grooving geometry, grade, and cutting specifications for your application, based on the workpiece material.


alloys

workpiece material application example

high-performance for optimal conditions(clean cuts, good machine condition, higher speed capability)

general purpose

(first choice for general machining)

unfavorable conditions(roughing, poor machinecondition, interrupted cuts,low speed)

KC5010200 - 650(60 - 200)

KT315330 - 750

(100 - 230)

KC5010160 - 550(50 - 170)

KT315230 - 560(70 - 170)

KC501050 - 360

(15 - 110)

KC5410590 - 2800(180 - 850)

KD100600 - 5000

(180 - 1500)

KC5025200 - 525(60 - 160)

KC5025160 - 400(50 -120)

KC502535 - 200(10 - 60)

KC5010500 - 2400(150 - 730)

KC5025160 - 430(50 - 130)

KC5025130 - 300(40 - 90)

KC502535 - 100(10 - 30)

KC5025200 - 1000(60 - 305)

machining condition

Recommendations for Grade and Speed Selection – sfm (m/min)

steel

100

®Top Notch Grooving InsertsTop Notch Grooving Application Guide

insert rake standard groove additionalstyle application angle width range information

• All Top Notch grooving inserts are precisionground to provide accurate edge location andsecure locking of the insert in the toolholderpocket.

• Top Notch threading and grooving inserts canbe used in either toolholders or boring bars.

• Right-hand Top Notch grooving toolholders use right-hand inserts. Left-hand Top Notchgrooving toolholders use left-hand inserts.

• Right-hand Top Notch grooving boring bars use left-hand inserts. Left-hand Top Notchgrooving boring bars use right-hand inserts.

left-hand right-hand

NG-K • chip control geometry 10° size 2 = .031 to .128 • inch and metric widths standard• general purpose grooving positive size 3 = .039 to .189 • chip control works well under a• o-ring grooving variety of machining conditions• circlip grooving • strong Top Notch design allows• light turning light axial turning in two directions

pages 104-105

NG • general purpose grooving neutral size 1 = .031 to .094 • popular general purpose grooving insert• o-ring grooving size 2 = .031 to .125 • inch and metric widths standard• circlip grooving size 3 = .047 to .189

pages 105-106

NGP • general purpose grooving 5° size 2 = .031 to .125 • ground positive rake• o-ring grooving positive size 3 = .088 to .189 reduces cutting forces• circlip grooving • recommended for grooving aluminum

and difficult-to-machine materialspage 106

NGD-K • chip control geometry 10° size 3 = .062 to .189 • deep grooving up to 1/2" deep• deep grooving positive • chip control works well under a• light turning variety of machining conditions

• strong Top Notch design allows

page 107 light axial turning in two directions

NGD • deep grooving neutral size 3 = .189 • deep grooving up to 1/2" deep• for customers who prefer to regrind

the width of the insert

page 107

NR-K • chip control geometry 10° radius size • excellent choice for plunge grooving,positive size 3 = .031 to .078 turning, and profiling

• chip control effective at higher feed rates

page 107


101

Top Notch Grooving InsertsTop Notch Grooving Application Guide


NR • full radius end form neutral radius size • a popular insert for full radius grooving• general purpose grooving size 2 = .031 to .062 • strong Top Notch design allows• general purpose profiling size 3 = .031 to .094 light turning and profiling in two directions

page 107

NRP • full radius end form 5° radius size • ground positive rake reduces• general purpose grooving positive size 3 = .031 to .094 cutting forces• general purpose profiling • recommended for machining

aluminum and difficult-to-machine materials

page 108

NRD • deep grooving neutral radius size • deep grooving with a full radius up• full radius endform size 3 = .031 to .062 to 1/2" deep

• strong Top Notch design allowslight axial turning/profiling in two directions

page 108

NF • face grooving neutral size 3 = .125 to .188 • face grooving where extra sideclearance is required for small diameters

• NG-style inserts may be used toface groove large diameters

page 108

NF-K • face grooving 10° size 3 = .125 to .156 • face grooving, with chip control,with chip control positive where extra side clearance is required for

small diameters• NG-style inserts may be used to

face groove large diameterspage 108

NFD-K • deep face grooving 10° size 3 = .125 • deep face grooving, with chipwith chip control positive control, up to 1/2" deep

• use where extra side clearance isrequired for small diameters

• NGD-K style inserts may be usedto face groove large diameters

page 109

NFD-KI • internal deep face grooving 10° size 3 = .125 to .189 • use in boring bars to generatewith chip control positive face grooves in the bottom of a bore

page 109


102

®Top Notch Grooving InsertsTop Notch Grooving Application Guide


NP-K • turning 10° available in: • designed for light turning, backturning,NPD-K • backturning positive size 2 profiling, and other operations with

• profiling with chip control size 3 chip control• usually applied on small automatic lathes

page 109

NU • undercutting neutral size 3 = .094 to .156 • designed to easily cut workpiecegrinding reliefs

• requires the correct toolholder

page 110

NV • Poly-Vee grooving neutral size 3 = J style • standard inserts are used tomachine single grooves

• special inserts are available to machinemultiple grooves with one insert

• Top Notch rigidity is unsurpassedpage 110 in this type of operation

NB • blanks — available in: • Top Notch blanks are available insize 2 high quality Kennametal uncoated carbidesize 3 grades

• use to make special insert forms inyour own shop

page 110 • ground on top, bottom, and sides

NBD • blanks for deep grooving — available in: • use in making special inserts forsize 2 deep grooving applicationssize 3 • one cutting edge

• rigid designpage 110

Special Top Notch Grooving Inserts

All Top Notch special inserts benefit from the superior rigidity of our Top Notchtoolholder and clamping system. For added productivity, most specials can beincorpor-ated into the double-ended inserts.All of our specials start with provenKennametal carbide grade technology asthe basis for optimizing tool performance.

Positive top rake angles are also available in most of our inserts. State-of-the-art CAD allows rapid development of your

special insert design. For convenience, a concept drawing is always available to facilitate engineering development of an insert.

There are limitless variations of the flat-top Top Notch design. In addition, chip control in the most common styles allowstrue optimization and productivity.

Kennametal offers NB- and NBD-styleinsert blanks as well. These blanks can be end form ground in your own shop.

Whatever your special grooving requirements may be, Kennametal can provide an effective solution. We have the technical expertise, resources,and commitment to help you develop insert designs which satisfy your metalcutting application demands.

Common examples of forms are shown inCatalog 1010, page 239.


103

Top Notch Grooving InsertsTop Notch Grooving Insert Identification System

1 2,54 .1002 3,81 .1503 4,95 .1954 6,48 .2555 9,65 .3806 9,73 .383

s(mm) s(in.)

Top Notch Holder Design

NOTE: Holders are designed to locate insert inclined to3° to provide back clearance down open side.

Kennametal and Top Notch toolingtechnology combine to bring youthe very best threading and grooving system available in the world today.

1 .100 2,54 .100 2,542 .219 5,56 .150 3,813 .344 8,74 .195 4,954 .453 11,51 .255 6,485 .688 17,48 .380 9,656 .453 11,51 .383 9,738 .312 7,93 .438 11,13

insertsize

a s

inch mm inch mm

Top Notch Threading and Grooving Insert Dimensions

* Kennametal proprietary identification system** Omit position for Top Notch NB-style blanks.

N G P 3 ▫ 125 R K ▫2.Insert StyleB — blank (for special forms)F — face groovingG — groovingP — backturningR — full radiusU — undercutting (or relieving)V — Poly Vee

3.AdditionalInformationD — deep groovingP — positive

4.Insert Size

5.MetricIdentificationM — metric insert groove

width (position usedonly for metric products)

1.Type of InsertN — Top Notch

N*

insert number

**6.Insert GrooveWidthPosition pertains to groovewidth and radii for F, G, andR-style grooving inserts (0,01 mm/.001") increments.Metric example: 3,25 mmwidth groove or radiusequals “325” catalog position numberInch example: 1/32" groovewidth or radius equals “031”catalog position number

7.Hand ofInsertL — leftR — right

8.ChipbreakerDesignK — standard chip

control

9.Definitionof Insertgroove size “J” or “L” —for Poly Vee inserts

104

®Top Notch Grooving Inserts




NG-K

winch±.001

mm inch mm inch±.005

mm inch mmright hand left hand

rε e1einsert catalog number

K68

K31

3

KT3

15

KD

100

KC

5010

KC

5025

KC

5410

gradesdimensions

steel

stainless steel

non-ferrous

high-temp alloys


NG-2031RK .031 0,79 .002 0,05 .050 1,27 .030 0,76 � � �NG-2031LK .005 0,13 � � �

NG-2M080RK .031 0,80 .002 0,05 .050 1,27 .030 0,76 � �NG-2M080LK .005 0,13 � �

NG-2M100RK .039 1,00 .002 0,05 .050 1,27 .030 0,76 � � �NG-2M100LK .005 0,13 � � �

NG-2047RK .047 1,19 .002 0,05 .050 1,27 .030 0,76 � � �NG-2047LK .005 0,13 � � �

NG-2M120RK .047 1,20 .002 0,05 .050 1,27 .030 0,76 � � �NG-2M120LK .005 0,13 � � �

NG-2M140RK .055 1,40 .002 0,05 .050 1,27 .030 0,76 � � �NG-2M140LK .005 0,13 � � �

NG-2M150RK .059 1,50 .005 0,13 .110 2,79 .043 1,09 � �NG-2M150LK .010 0,25 � �

NG-2062RK .062 1,57 .005 0,13 .110 2,79 .043 1,09 � � �NG-2062LK .010 0,25 � � �

NG-2M170RK .067 1,70 .005 0,13 .110 2,79 .043 1,09 � � �NG-2M170LK .010 0,25 � � �

NG-2M175RK .069 1,75 .005 0,13 .110 2,79 .043 1,09 �NG-2M175LK .010 0,25 �

NG-2M195RK .077 1,95 .005 0,13 .110 2,79 .043 1,09 � � �NG-2M195LK .010 0,25 � � �

NG-2M200RK .079 2,00 .005 0,13 .110 2,79 .043 1,09 � � �NG-2M200LK .010 0,25 � � �

NG-2M220RK .087 2,20 .005 0,13 .110 2,79 .043 1,09 �NG-2M220LK .010 0,25 �

NG-2M225RK .089 2,25 .005 0,13 .110 2,79 .043 1,09 � � �NG-2M225LK .010 0,25 � � �

NG-2094RK .094 2,39 .005 0,13 .110 2,79 .043 1,09 � � �NG-2094LK .010 0,25 � � �

NG-2M250RK .098 2,50 .005 0,13 .110 2,79 .043 1,09 �NG-2M250LK .010 0,25 �

NG-2M275RK .108 2,75 .005 0,13 .110 2,79 .043 1,09 � � �NG-2M275LK .010 0,25 � � �

NG-2M300RK .118 3,00 .005 0,13 .110 2,79 .043 1,09 � � �NG-2M300LK .010 0,25 � � �

NG-2125RK .125 3,18 .005 0,13 .110 2,79 .043 1,09 � � �NG-2125LK .010 0,25 � � �

NG-2M325RK .128 3,25 .005 0,13 .110 2,79 .043 1,09 �NG-2M325LK .010 0,25 �

NG-3M100RK .039 1,00 .005 0,13 .075 1,90 .030 0,76 � �NG-3M100LK .010 0,25 � �

NG-3047RK .047 1,19 .005 0,13 .075 1,90 .030 0,76 � �NG-3047LK .010 0,25 � �

NG-3M120RK .047 1,20 .005 0,13 .075 1,90 .030 0,76 � �NG-3M120LK .010 0,25 � �

NG-3M150RK .059 1,50 .005 0,13 .094 2,39 .040 1,02 � �NG-3M150LK .010 0,25 � �

NG-3062RK .062 1,57 .005 0,13 .094 2,39 .040 1,02 � � � �NG-3062LK .010 0,25 � � �

NG-3M175RK .069 1,75 .005 0,13 .094 2,39 .040 1,02 �NG-3M175LK .010 0,25 �

NG-3072RK .072 1,83 .005 0,13 .094 2,39 .040 1,02 � �NG-3072LK .010 0,25 � �

NG-3078RK .078 1,98 .005 0,13 .094 2,39 .040 1,02 � �NG-3078LK .010 0,25 � �

NG-3M200RK .079 2,00 .005 0,13 .094 2,39 .040 1,02 � �NG-3M200LK .010 0,25 � �

NG-3M220RK .087 2,20 .005 0,13 .094 2,39 .040 1,02 �NG-3M220LK .010 0,25 �

NG-3M225RK .089 2,25 .005 0,13 .094 2,39 .040 1,02 � � �NG-3M225LK .010 0,25 � � �

NG-3094RK .094 2,39 .005 0,13 .150 3,81 .040 1,02 � � � �NG-3094LK .010 0,25 � � �

NG-3M250RK .098 2,50 .005 0,13 .150 3,81 .040 1,02 � �NG-3M250LK .010 0,25 � �

NG-3M275RK .108 2,75 .005 0,13 .150 3,81 .040 1,02 � � �NG-3M275LK .010 0,25 � � �

NG-3M300RK .118 3,00 .005 0,13 .150 3,81 .040 1,02 � � �NG-3M300LK .010 0,25 � � �

NG-3125RK .125 3,18 .005 0,13 .150 3,81 .040 1,02 � � � �NG-3125LK .010 0,25 � � �

105

Top Notch Grooving Inserts




NG-K



K68

K31

3

KT3

15

KD

100

KC

5010

KC

5025

KC

5410

grades

steel

stainless steel

non-ferrous

high-temp alloys


— NG-1031L .031 0,79 .005 0,13 .050 1,27 — — �.010 0,25

— NG-1047L .047 1,19 .005 0,13 .075 1,91 — — � �.010 0,25

— NG-1062L .062 1,57 .005 0,13 .075 1,91 — — � �.010 0,25

— NG-1094L .094 2,39 .005 0,13 .075 1,91 — — � �.010 0,25

NG-1Lone cutting edge

NG-3M320RK .126 3,20 .005 0,13 .150 3,81 .040 1,02 �NG-3M320LK .010 0,25 �

NG-3M325RK .128 3,25 .005 0,13 .150 3,81 .040 1,02 � �NG-3M325LK .010 0,25 � �

NG-3M350RK .138 3,50 .010 0,25 .150 3,81 .040 1,02 � �NG-3M350LK .015 0,38 � �

NG-3156RK .156 3,96 .005 0,13 .150 3,81 .115 2,92 � �NG-3156LK .010 0,25 � �

NG-3M400RK .157 4,00 .010 0,25 .150 3,81 .115 2,92 � � �NG-3M400LK .015 0,38 � � �

NG-3M425RK .167 4,25 .010 0,25 .150 3,81 .115 2,92 � �NG-3M425LK .015 0,38 � �

NG-3M450RK .177 4,50 .010 0,25 .150 3,81 .115 2,92 �NG-3M450LK .015 0,38 �

NG-3189RK .189 4,80 .020 0,51 .150 3,81 .115 2,92 � � �NG-3189LK .025 0,64 � � �

winch±.001


mm inch mm

rε e1edimensions

106







K68

K31

3

KT3

15

KD

100

KC

5010

KC

5025

KC

5410

grades

steel

stainless steel

non-ferrous

high-temp alloys


NG

NGP-2031R .031 0,79 .002 0,05 .050 1,27 — — � �NGP-2031L .005 0,13 �

NGP-2062R .062 1,57 .005 0,13 .110 2,79 — — � �NGP-2062L .010 0,25 � �

NGP-2125R .125 3,18 .005 0,13 .110 2,79 — — � �NGP-2125L .010 0,25 �

NGP-3088R .088 2,23 .005 0,13 .094 2,39 — — � �NGP-3088L .010 0,25 � � �

NGP-3125R .125 3,18 .005 0,13 .150 3,81 — — � � �NGP-3125L .010 0,25 � � �

NGP-3156R .156 3,96 .005 0,13 .150 3,81 — — �NGP-3156L .010 0,25 �

NGP-3189R .189 4,80 .020 0,51 .150 3,81 — — � �NGP-3189L .025 0,64 � �

NG-2031R .031 0,79 .002 0,05 .050 1,27 — — �NG-2031L .005 0,13 �

NG-2041R .041 1,04 .002 0,05 .050 1,27 — — � �NG-2041L .005 0,13 � �

NG-2047R .047 1,19 .002 0,05 .050 1,27 — — �NG-2047L .005 0,13 �

NG-2058R .058 1,47 .005 0,13 .050 1,27 — — � �NG-2058L .010 0,25 � �

NG-2062R .062 1,57 .005 0,13 .110 2,79 — — �NG-2062L .010 0,25 �

NG-2094R .094 2,39 .005 0,13 .110 2,79 — — �NG-2094L .010 0,25 �

NG-2125R .125 3,18 .005 0,13 .110 2,79 — — �NG-2125L .010 0,25 �

NG-3047R .047 1,19 .005 0,13 .075 1,91 — — � �NG-3047L .010 0,25 � �

NG-3062R .062 1,57 .005 0,13 .094 2,39 — — � � �NG-3062L .010 0,25 � � �

NG-3072R .072 1,83 .005 0,13 .094 2,39 — — �NG-3072L .010 0,25 �

NG-3078R .078 1,98 .005 0,13 .094 2,39 — — �NG-3078L .010 0,25 �

NG-3088R .088 2,24 .005 0,13 .094 2,39 — — � � �NG-3088L .010 0,25 � �

NG-3094R .094 2,39 .005 0,13 .150 3,81 — — � � �NG-3094L .010 0,25 � � �

NG-3097R .097 2,46 .010 0,13 .150 3,81 — — � �NG-3097L .015 0,25 � �

NG-3105R .105 2,67 .005 0,13 .150 3,81 — — � �NG-3105L .010 0,25 � �

NG-3110R .110 2,79 .010 0,25 .150 3,81 — — � �NG-3110L .015 0,38 � �

NG-3122R .122 3,10 .005 0,13 .150 3,81 — — �NG-3122L .010 0,25 � �

NG-3125R .125 3,18 .005 0,13 .150 3,81 — — � � �NG-3125L .010 0,25 � � �

NG-3142R .142 3,61 .010 0,25 .150 3,81 — — � �NG-3142L .015 0,38 � �

NG-3156R .156 3,96 .005 0,13 .150 3,81 — — �NG-3156L .010 0,25 �

NG-3178R .178 4,52 .005 0,13 .150 3,81 — — �NG-3178L .010 0,25 �

NG-3185R .185 4,70 .020 0,51 .150 3,81 — — �NG-3185L .025 0,64 �

NG-3189R .189 4,80 .020 0,51 .150 3,81 — — � � �NG-3189L .025 0,64 � �

NGP

winch±.001

mm inch mm inch±.005 mm inch mm

rε e1edimensions

107


NGD-K

*these inserts have one cutting edge

NR






K68

K31

3

KT3

15

KD

100

KC

5010

KC

5025

KC

5410

grades

steel

stainless steel

non-ferrous

high-temp alloys


NR-K

NGD


NGD-3062RK .062 1,57 .005 0,13 .125 3,18 .040 1,02 � � � �NGD-3062LK .010 0,25 � � �

NGD-3094RK* .094 2,39 .005 0,13 .250 6,35 .040 1,02 � � � �NGD-3094LK* .010 0,25 � � � �

NGD-3125RK* .125 3,18 .005 0,13 .250 6,35 .040 1,02 � � � �NGD-3125LK* .010 0,25 � � � �

NGD-3189RK* .189 4,80 .020 0,51 .250 6,35 .115 2,92 � � �NGD-3189LK* .025 0,64 � � � �

NGD-3189R* .189 4,80 .020 0,51 .250 6,35 — — �NGD-3189L* .025 0,64 �

NR-3031RK.062 1,57 .031 0,79 .094 2,39 .078 1,98 � �NR-3031LK

� �NR-3047RK.094 2,39 .047 1,19 .150 3,81 .100 2,54 � � � �NR-3047LK

� � �NR-3062RK.125 3,18 .062 1,57 .150 3,81 .100 2,54 � � �NR-3062LK

� � �NR-3078RK.156 3,96 .078 1,98 .150 3,81 .100 2,54 � �NR-3078LK

� �

NR-2031R.062 1,57 .031 0,79 .110 2,79 — — � �NR-2031L

� �NR-2047R.094 2,39 .047 1,19 .110 2,79 — — �NR-2047L

�NR-2062R.125 3,18 .062 1,57 .110 2,79 — — � �NR-2062L

�NR-3031R

.062 1,57 .031 0,79 .094 2,39 — — � �NR-3031L� �NR-3047R

.094 2,39 .047 1,19 .150 3,81 — — � �NR-3047L� �NR-3062R

.125 3,18 .062 1,57 .150 3,81 — — � �NR-3062L� �NR-3078R

.156 3,96 .078 1,98 .150 3,81 — — � �NR-3078L�NR-3094R

.188 4,78 .094 2,39 .150 3,81 — — � � �NR-3094L� � �

winch±.001


mm inch mm

rε e1edimensions

108







K68

K31

3

KT3

15

KD

100

KC

5010

KC

5025

KC

5410

grades

steel

stainless steel

non-ferrous

high-temp alloys


NRP

NRD

NF-K


NF-3125RK .125 3,17 .005 0,13 .150 3,81 .040 1,02 �NF-3125LK .010 0,25 �

NF-3156RK .156 3,96 .005 0,13 .150 3,81 .115 2,92 �NF-3156LK .010 0,25 �

NRP-3031R.062 1,57 .031 0,79 .094 2,39 — — � �NRP-3031L

� �NRP-3047R.094 2,39 .047 1,19 .150 3,81 — — � �NRP-3047L

� �NRP-3062R.125 3,18 .062 1,57 .150 3,81 — — � �NRP-3062L

� �NRP-3078R.156 3,96 .078 1,98 .150 3,81 — — �NRP-3078L

�NRP-3094R.188 4,78 .094 2,39 .150 3,81 — — �NRP-3094L

�

NRD-3031R.062 1,57 .031 0,79 .125 3,18 — — � � � �NRD-3031L

� � � �NRD-3062R*.125 3,17 .062 1,57 .250 6,35 — — � � � �NRD-3062L*

� � � �

NF NF-3125R .125 3,17 .005 0,13 .150 3,81 — — �NF-3125L .010 0,25 �

NF-3188R .188 4,77 .020 0,51 .150 3,81 — — �NF-3188L .025 0,64 � �

winch±.001


mm inch mm

rε e1edimensions






K68

K31

3

KT3

15

KD

100

KC

5010

KC

5025

KC

5410

grades

steel

stainless steel

non-ferrous

high-temp alloys


109


NFD-K

NFD-KI

NP-K

NPD-K




NFD-3125RK* .125 3,17 .005 0,13 .250 6,35 .040 1,02 �NFD-3125LK* .010 0,25 �

NFD-3125RKI* .125 3,17 .005 0,13 .250 6,35 .040 1,02 �NFD-3125LKI* .010 0,25 �

NFD-3189RKI* .189 4,80 .020 0,51 .250 6,35 .115 2,92 �NFD-3189LKI* .025 0,64 �

NP-2002RK — .140 3,55 .002 0,05 .110 2,79 .108 2,74 � �.005 0,13

NP-2012RK — .140 3,55 .012 0,31 .110 2,79 .108 2,74 �.015 0,38

NP-3002RK — .180 4,57 .002 0,05 .200 5,08 .151 3,83 � �.005 0,13

NP-3012RK — .180 4,57 .012 0,31 .200 5,08 .151 3,83 �.015 0,38

NPD-2002RK* — .140 3,55 .002 0,05 .200 5,08 .108 2,74 � �.005 0,13

NPD-2012RK* — .140 3,55 .012 0,31 .200 5,08 .108 2,74 �.015 0,38

NPD-3002RK* — .180 4,57 .002 0,05 .250 6,35 .151 3,83 �.005 0,13

NPD-3012RK* — .180 4,57 .012 0,31 .250 6,35 .151 3,83 � �.015 0,38

winch±.001 mm

winch±.005 mm

inch mm inch±.005 mm inch mm

rε e1edimensions

®Top Notch Grooving






K68

K31

3

KT3

15

KD

100

KC

5010

KC

5025

KC

5410

K42

0

grades

steel

stainless steel

non-ferrous

high-temp alloys*NB and NBD blanks are designed to allow modification of the "w” dimension and end form.“W” dimension is given to indicate maximum possible width.NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.

110

NU

NV

NB

NBD

NU-3094R.094 2,39 .020 0,51 .125 3,18 — — � �NU-3094L

� �NU-3125R.125 3,18 .047 1,19 .188 4,78 — — �NU-3125L

� �NU-3156R.156 3,96 .047 1,19 .188 4,78 — — �NU-3156L

�

NV-3RJ.087 2,21 .0125 0,30 .125 3,18 — — � �NV-3LJ

� �

NB-2R .150 3,81 — — — — — — � � �NB-2L � � �

NB-3R .195 4,95 — — — — — — � � �NB-3L � � �

NBD-2R .150 3,81 — — — — — — �NBD-2L �

NBD-3R .195 4,95 — — — — — — �NBD-3L �

winch±.001

mm

winch±.001

mm

d1

inch mm

inch mm inch±.005

mm inch mm

rε e1edimensions

90° included angle on end form

5 Easy Steps to Greater Productivity!

A3 deep grooving... for deep internal, external, and face grooving applications.

KENNA PERFECTGroovingKENNA PERFECTGrooving

A3 System CapabilitiesRatio: For grooving operations where the depth is 1.5 times the groove width or greater.


■ groove depth, width, and profile

■ material to be machined

■ application to be performed (face, OD, or ID grooving)

■ toolholder requirements (ie: KM, square shank, right/left)

STEP 1:Choose your system based on the groove depth required.

Top Notch

Grooving (grooves where the depth is 1.5times the groove width or less)

See Top Notch grooving, page 98.

A3

Deep Grooving (grooves where the depth is 1.5 timesthe groove width or greater)

Proceed to Step 2.

groove min. max.

width .087 .397

depth .130 1.260

Face grooving diameter range: .984 to ∞111

5 Easy Steps to Greater Productivity (cont’d)

STEP 2:Choose your toolholder based on the application. Please note that holders

are available in conventional square shank as well as quick-change versions.

Take special note of the seat size based on the groove width.

■ For OD grooving with integral square shank holders, see pages 174-175.

STEP 3:Select the proper chipbreaker and feed rate for the application and

material to be machined. See table below. Note for future reference.

steel stainless steel non-ferrous high-temp

alloys

DM DF DF DF.002 - .010 .002 - .006 .002 - .010 .002 - .005

(0,05 - 0,25) (0,05 - 0,15) (0,05 - 0,25) (0,05 - 0,13)

DF.002 - .007

(0,05 - 0,18)

DF DF DF DF.002 - .006 .002 - .005 .002 - .007 .0015 - .004

(0,05 - 0,15) (0,05 - 0,13) (0,05 - 0,18) (0,04 - 0,10)

DR DF DF DF.004 - .015 .002 - .010 .002 - .010 .002 - .010

(0,10 - 0,40) (0,05 - 0,25) (0,05 - 0,25) (0,05 - 0,25)

DF.002 - .010

(0,05 - 0,25)

DF – Deep Finishing DM – Deep Medium DR – Deep Roughing

NOTE: Use minimum feed rates for narrower grooves and heavier feed rates for wider grooves. Increase feed rateas operation allows. See Technical Section for additional application information.NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.

deep OD grooving

face & ID grooving

profiling For profiling, the maximum recommended depth of cut is one-third the insert’s width.

workpiece material

application example

A3 Chipbreakers and Feed Rates – in/rev (mm/rev)

KENNA PERFECTA3 Deep GroovingKENNA PERFECTA3 Deep Grooving

112

STEP 4:Choose the grade and speed based on the

material and cutting conditions to be encountered.

STEP 5:Select insert and holder from Lathe Tooling Catalog 1010 pages which

meet the above criteria. Note the insert seat size and cutting width. Match the seat

size and cutting width to your toolholder selection.

For example: Insert: A3G250I08P1DFGrade: KT315Width: .250 Seat Size: 8

Congratulations! You have successfully maximized productivity by selecting the best A3 insertgeometry, grade, and cutting specifications for your application based on theworkpiece material.


alloys

workpiece material application example

high-performance foroptimal conditions(clean cuts, good machine condition, higher speed capability)

general purpose(first choice for general machining)

unfavorable conditions(roughing, poor machinecondition, interrupted cuts,low speed)

KT315330 - 750

(100 - 230)

KC5010200 - 600(60 - 185)

KT315230 - 560(70 - 170)

KC5010590 - 2800(180 - 850)

KC501035 - 360

(10 - 110)

KC5025200 - 525(60 - 160)

KC5010160 - 450(50 -140)

KC5010500 - 2400(150 - 730)

KC502535 - 200(10 - 60)

KC5025160 - 360(50 - 110)

KC5025130 - 300(40 - 90)

KC5025200 - 1000(60 - 305)

KMF200 - 650(60 - 200)

KC502535 - 150(10 - 46)

KMF35 - 100(10 - 30)

*CBN tip inserts are available on request.NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.

machining condition

Recommendations for Grade and Speed Selection –sfm (m/min)

steel

113

114

(*)4S designates a size “4 small” insert for face grooving small diameters.NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of


®A3 Deep Grooving Insert Identification System

A3 Custom Grooving Inserts

A3 G 0400 I 04 P 02 DF2.Insert Style

G — squareR — full radiusV — V-shape 35°

3.GrooveWidthexpressed in .001inch or 1/100 mm0000 for V shape

4.Units

I = inchM = metric

5.Insert Size

0304

(*)4S05060810

1.Type of ProgramA3 — deep grooving

program

6.Definition ofthe Insert

P = precision (ground)U = utility (molded)

7.Corner Radii

inch metric

0 0105 = .008 021 = .016 042 = .032 083 = .047 124 = .062 16

full radius = 00

8.Chip Former

DF = Deep FinishingDM = Deep MediumDR = Deep Roughing

The A3 Deep Grooving System lends itself to custom grooving applications. Six standard insertseat sizes can be used to cut grooves from .093 to .394, in .001 increments. Either round orsquare grooves can be generated with various corner radii. For additional information on how toorder custom grooving inserts, refer to Catalog1010, pages 260-261 or call 1-800-446-7738.

Easy to order! To take advantage of A3’s flexibility, just build your own part number from the table below andcall your local Kennametal service center at 1-800-446-7738 for a quick quote.

Delivery is quick, too! All uncoated inserts are shipped within fiveworking days and coated inserts within tenworking days.

115

A3 Deep Grooving Inserts




A3-DF A3G093I03P05DF 3 .093 2,36 .008 0,2 � � � �A3G125I03P05DF 3 .125 3,18 .008 0,2 � � � �

A3G125I04P05DF 4 .125 3,18 .008 0,2 � � � �

w rεseat size

inch ±.001 mm ±0,025 inch mminsert catalog number

KT3

15

KM

F

KC50

10

KC50

25

grades

steel

stainless steel

non-ferrous

high-temp alloys


A3-DF A3R093I03P00DF 3 .093 2,36 .047 1,2 � � � �A3R125I03P00DF 3 .125 3,18 .062 1,6 � � � �

A3R125I04P00DF 4 .125 3,18 .062 1,6 � � � �

A3R187I05P00DF 5 .187 4,75 .093 2,4 � � � �

A3-DF A3G0300M03P02DF 3 .118 3,00 .008 0,2 � � � �A3G0300M03P04DF 3 .118 3,00 .016 0,4 �

A3G0400M04P02DF 4 .157 4,00 .008 0,2 � � � �A3G0400M04P04DF 4 .157 4,00 .016 0,4 � � � �A3G0400M04P08DF 4 .157 4,00 .031 0,8 �

A3-DF A3R0300M03P00DF 3 .118 3,00 .059 1,50 � � � �

A3R0400M04P00DF 4 .157 4,00 .079 2,00 � � � �

Metric InsertsPrecision Ground

Inch InsertsPrecision Ground

116

®A3 Deep Grooving Inserts




A3-DM A3G0305M03U02DM 3 .120 3,05 .008 0,2 � �

A3G0405M04U02DM 4 .159 4,05 .008 0,2 � �


KT3

15

KM

F

KC

5010

KC

5025

grades

steel

stainless steel

non-ferrous

high-temp alloys


A3-DR A3R0305M03U00DR 3 .120 3,05 .060 1,52 � �

A3R0405M04U00DR 4 .159 4,04 .080 2,02 � �

A3-DM A3V0000M04U02DM 4 .236 5,99 .008 0,2 � �

Precision Molded

35° Profiling

NOTE: V-form inserts can onlybe used in profiling toolholders,see page 175.

w rε

ls rε

seat sizeinch +.006

-0 mm +0,15-0

inch mm inch mm

inch mm

117

Patented A2 Insert Stop Design• As cutting forces increase, clamping forces

also increase for secure holding power.

• Fixed insert stop assures solid seating with everyindex and delivers up to 30% longer tool life.

• Cutting height is accurately controlled for maximum reliability and performance on even small diameter parts.

Innovative A2 Insert Design• V-prisms on both top and bottom enable higher

clamping force to prevent insert movement,even when cutting at high feed rates.

• The cutting edge has a molded-in chipbreakerramp to direct chips away from the blade,extending blade life.

• Positive rake cutting action combined withKennametal’s high-performance PVD coatingsresult in superior tool life and chip control.

Quick and Easy Insert Indexing• A convenient indexing wrench is

available to minimize downtime by enabling fast removal and insertion without damage to the cutting edge.

Part of our Complete Line of

A2/A3 Cutoff and Deep Grooving Tooling

Maximize Productivity with High-Performance A2 Cutoff Tooling

117

118

neutral (0°) right/left 6° - 10° right/left 15° - 16°

• for cutting off solid workpieces • for cutting off solid workpieces • for thin-walled workpieces• center stub will form on cutoff part with reduced formation of center stub • for cutting off small diameter• eliminates lateral deflection • for cutoff to a through-hole with workpieces with minimal burr • best for deep cutoff depths reduced burr or center stub

tool life best tool life better tool life good tool life

0

1

2

3

4

5

6

7

8

9

10

.063 .087 .118 .157 .197 .236 .315(1,6) (2,2) (3,0) (4,0) (5,0) (6,0) (8,0)

(25)

(50)

(75)

(100)

(125)

(150)

(175)

(200)

(225)

(250)

insert width - in. (mm)

max

imum

cut

off d

iam

eter

- in

. (m

m)

insert type

recommendedapplication

19 mm

26 mm

32 mm

blade height

52 mm

integralshanktoolholders

Maximize Productivity withHigh Performance A2 CutofKENNA PERFECT Cutoff System5 Easy Steps to Maximize Cutoff Productivity


■ cutoff diameter

■ part/machine requirements

For required cutoff diameter, selectinsert width and holder type based on the part and machine requirement:

◆ To maximize rigidity, select the largest possible

blade height or an integral shank holder.

◆ Diameters shown are for cutoff to center.

Maximum cutoff depth to a through-hole is

one-half the diameter.

◆ To determine capability for cutoff to a

through-hole on integral shank or reinforced

blades, please refer to listing for that tool in

this catalog.

Step 1: Select insert width and holder type.

Step 2: Select insert lead angle.What you need to know:

■ part type ■ burr and center stub considerations■ cutoff to center or through-hole

toolholder type

blade:(self-clamping)

blade:(self-clamping, reinforced version)

integral shank toolholder:(screw-clamping)

• frequently used tool • efficient tooling solution with • shank tool with the highest stability• two insert seats improved stability • limited depth of cut• deepest depth of cut capability • limited depth of cut capability • single insert seat

(available in 26 mm and 32 mm heights)

118NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of


119

-CF

Cutoff Fine

• cutoff insert with precision ground cutting edge for low feeds

• curved cutting edge

• cutoff insert with precision moldedcutting edge for medium feeds

• stabilized straight cutting edge

-CM

Cutoff Medium-CR

Cutoff Rough


alloyssteelinsert type

N-CR N-CF N-CF N-CF.003 – .012 .002 – .005 .002 – .007 .002 – .004(0,08 – 0,3) (0,05 – 0,12) (0,05 – 0,18) (0,04 – 0,10)

N-CF.002 – .006

(0,05 – 0,15)R/L-CR R/L-CF R/L-CF R/L-CF

.002 – .005 .002 – .003 .002 – .004 .002 – .003(0,05 – 0,12) (0,04 – 0,08) (0,04 – 0,10) (0,04 – 0,08)

R/L-CF.002 – .003

(0,04 – 0,08)

• cutoff insert with precision moldedcutting edge for higher feed rates

• curved cutting edge

Chipbreaker Style and Feed Rates - in/rev (mm/rev)

Grade and Speed Recommendations - sfm (m/min)

high performance optimum conditions, higher speeds

first choicefor general machining conditions

unfavorable conditions interrupted cuts, low speeds

Step 3: Select chipbreaker style and feed rate.

What you need to know: ■ lead angle or neutral insert■ workpiece material

Step 4: Select grade and speed. What you need to know:

■ cutting ■ workpiece condition material

Step 5: Select insert and holder from catalog pages.Note the insert seat size and cutting width. Match the seat size and cutting width to your toolholder selection.

Congratulations!You have successfully maximized cutoff productivity by selecting the best insert, toolholder, grade, and cutting specifications for your application!

workpiece material

KT315 KC5025 KC5025steel 395 - 625 265 - 560 200 - 325

(120 -190) (80 - 170) (60 - 100)

KT315 KC5025 KMFstainless steel 230 - 560 265 - 500 135 - 265

(70 - 170) (80 - 150) (40 - 80)

KT315 KC5025 KMFnon-ferrous 600 - 1300 500 - 980 200 - 600

(180 - 400) (150 - 300) (60 - 180)

KC5025 KC5025 KMFhigh-temp alloys 100 - 325 80 - 250 30 - 80

(30 - 100) (25 - 75) (10 - 25)

NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.119

120

®A2 Cutoff Insert Identification System

Kennametal proprietary identification system.NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of


A2 040 N 00 CF 022.Cutting Width

(in 1/10 mm)

3.Hand ofInsertN = neutralR = right handL = left hand

4.Approach Angleof Main CuttingEdge

00 = neutral06 = 6°10 = 10°15 = 15°16 = 16°

5.Chipbreaker-CF (Cutoff Fine)-CM (Cutoff Medium)-CR (Cutoff Rough)

1.Insert TypeA2 — cutoff

6.Corner Radius

mm inch

00 0,03 .00101 0,1 .00402 0,2 .00803 0,3 .01004 0,4 .016

With more than 80 insert line items in three grades and three chipbreaker styles,Kennametal offers a complete line of inserts designed to productively handle most any cutoff application.

121

A2-CF — Cutoff Fine Inserts




Neutral -CF Style A2 016N00CF01 1 .063 1,6 0 .004 0,1 � � �

A2 022N00CF02 2 .087 2,2 0 .008 0,2 � � �

A2 030N00CF02 3 .118 3,0 0 .008 0,2 � � �

A2 040N00CF02 4 .157 4,0 0 .008 0,2 � � �

w* rεseat size

inch mm inch mm

inch mm inch mmcatalog number

KT3

15

KM

F

KC

5025

grades

steel

stainless steel

non-ferrous

high-temp alloys


Left -CF Style A2 016L06CF00 1 .063 1,6 6 .001 0,03 � � �A2 016L10CF00 1 .063 1,6 10 .001 0,03 �A2 016L16CF00 1 .063 1,6 16 .001 0,03 �

A2 022L06CF02 2 .087 2,2 6 .008 0,2 � � �A2 022L10CF00 2 .087 2,2 10 .001 0,03 �A2 022L16CF00 2 .087 2,2 16 .001 0,03 �

A2 030L06CF02 3 .118 3,0 6 .008 0,2 � � �A2 030L10CF00 3 .118 3,0 10 .001 0,03 �A2 030L15CF00 3 .118 3,0 15 .001 0,03 �

A2 040L06CF02 4 .157 4,0 6 .008 0,2 � � �

Right -CF Style A2 016R06CF00 1 .063 1,6 6 .001 0,03 � � �A2 016R10CF00 1 .063 1,6 10 .001 0,03 �A2 016R16CF00 1 .063 1,6 16 .001 0,03 �

A2 022R06CF02 2 .087 2,2 6 .008 0,2 � � �A2 022R10CF00 2 .087 2,2 10 .001 0,03 �A2 022R16CF00 2 .087 2,2 16 .001 0,03 �

A2 030R06CF02 3 .118 3,0 6 .008 0,2 � � �A2 030R10CF00 3 .118 3,0 10 .001 0,03 �A2 030R15CF00 3 .118 3,0 15 .001 0,03 �

A2 040R06CF02 4 .157 4,0 6 .008 0,2 � � �

a°

*tolerance on

“w” dimension

width tolerance

.063 1,6+0 +0

-.004 -0,1

.087 2,2

.118 3,0+.006 +0,15

.157 4,0-0 -0

.197 5,0

.236 6,0+.010 +0,25

.315 8,0-0 -0

NOTE: A2 inserts are designed to fit both A2 and A3 tooling (A2 inserts are not

recommended for face grooving).

122

®A2-CM — Cutoff Medium Inserts




Neutral -CM Style A2 016N00CM01 1 .063 1,6 0 .004 0,1 � �

A2 022N00CM02 2 .087 2,2 0 .008 0,2 �

A2 030N00CM02 3 .118 3,0 0 .008 0,2 �

A2 040N00CM02 4 .157 4,0 0 .008 0,2 �

catalog number

KT3

15

KM

F

KC

5025

grades

steel

stainless steel

non-ferrous

high-temp alloys


Left -CM Style A2 016L06CM00 1 .063 1,6 6 .001 0,03 � �A2 016L16CM00 1 .063 1,6 16 .001 0,03 �

A2 022L06CM00 2 .087 2,2 6 .001 0,03 �

A2 030L06CM01 3 .118 3,0 6 .004 0,1 �

Right -CM Style A2 016R06CM00 1 .063 1,6 6 .001 0,03 � �A2 016R16CM00 1 .063 1,6 16 .001 0,03 �

A2 022R06CM00 2 .087 2,2 6 .001 0,03 �

A2 030R06CM01 3 .118 3,0 6 .004 0,1 �



w* rεseat size

inch mm inch mma°

inch mm inch mm

*tolerance on

“w” dimension

width tolerance

.063 1,6+0 +0

-.004 -0,1

.087 2,2

.118 3,0+.006 +0,15

.157 4,0-0 -0

.197 5,0

.236 6,0+.010 +0,25

.315 8,0-0 -0

123

A2-CR — Cutoff Rough Inserts




Neutral -CR Style A2 022N00CR02 2 .087 2,2 0 .008 0,2 � �

A2 030N00CR02 3 .118 3,0 0 .008 0,2 � �

A2 040N00CR02 4 .157 4,0 0 .008 0,2 � �

catalog number

KT3

15

KM

F

KC

5025

grades

steel

stainless steel

non-ferrous

high-temp alloys


Left -CR Style A2 022L06CR03 2 .087 2,2 6 .012 0,3 �

A2 030L06CR03 3 .118 3,0 6 .012 0,3 �

A2 040L06CR03 4 .157 4,0 6 .012 0,3 �

Right -CR Style A2 022R06CR03 2 .087 2,2 6 .012 0,3 �

A2 030R06CR03 3 .118 3,0 6 .012 0,3 �

A2 040R06CR03 4 .157 4,0 6 .012 0,3 �



w* rεseat size

inch mm inch mma°

inch mm inch mm

*tolerance on

“w” dimension

width tolerance

.063 1,6+0 +0

-.004 -0,1

.087 2,2

.118 3,0+.006 +0,15

.157 4,0-0 -0

.197 5,0

.236 6,0+.010 +0,25

.315 8,0-0 -0

Kennametal is your single source forSwiss tooling optimization!

We’ve expanded our Swiss tooling product line to include:

• new products for traditional turning, backturning,threading, grooving, and cutoff applications

• new toolholders in both inch and metric shankdimensions

• new inserts offered in PVD-coated carbide andPVD-coated cermet

• new grades that feature up-sharp cutting edges andoffer excellent wear resistance

Swiss-style machines are becoming a popular alternative to largerlathes and machining centers in many machine shops. Theincreased flexibility and capabilities of Swiss-style machines alsocreate unique tooling challenges for machine operators.Kennametal meets those challenges with this new line of Swisstooling solutions!

Kennametal will manufacture special nose radius, groove width, or backturning lead angle inserts. Whatever your backturning,grooving, cutoff, or threading requirements, Kennametal has an effective solution. Kennametal engineering expertise andcommitment will satisfy your application requirements.

Backturning,Cutoff, Grooving,and Threading

Backturning,Cutoff, Grooving,and Threading

124

125

Backturning, Cutoff, Grooving, and Threading

page

KENNA PERFECT Selection. . . . . . 126

Tooling Application Guide . . . . . . . . . 126

Insert Identification System. . . . . . . . . 127

Inserts

Laydown Backturning Inserts . . . . . . . . . . . . . . . . . . . . 128

On-Edge Backturning Inserts . . . . . . . . . . . . . . . . . . . . . 128

On-Edge Threading Inserts . . . . . . . . . . . . . . . . . . . . . . . . 129

On-Edge Cutoff Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

On-Edge Grooving Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . 130

Need technicalassistance?

Call our Tech Hotline!

128

126

®KENNA PERFECT Grade SelectionPVD Coated Grades

NOTE: These grades are specifically offered for Swiss-Style backturning, cutoff, grooving, and threading applications.For other grades and application guidelines, please see the Technical Data Section of this catalog.

speed rangesfm (m/min)

feed rangeipr (mm/rev)grade

NEW!

composition: A PVD TiN-coated grade with a toughultra-fine grain, unalloyed substrate.application: For general-purpose machining of moststeels, stainless steels, high-temperature alloys, titanium,irons, and non-ferrous materials. Features sharp cuttingedges and excellent wear resistance.

KC5035

turning, boring,& profiling

NEW!

KT5135

turning, boring,& profiling

Feed and Speed Recommendations

grade coating insert styles composition and application C ISOclass class

composition: A PVD TiN-coated cermet turning, boring,and profiling grade.application: Ideal for finishing and semi-finishing of mostcarbon and alloy steels and stainless steels. Performsvery well in cast and ductile iron applications. Provideslong and consistently reliable tool life and will produceexcellent workpiece surface finishes. Features sharpcutting edges and excellent wear resistance.

steelKC5035 225 - 850 (70 - 260) .002 - .012 (0,05 - 0,30)KT5135 350 - 1000 (110 - 305) .001 - .010 (0,03 - 0,75)

stainless steelKC5035 150 - 500 (50 - 150) .002 - .012 (0,05 - 0,30)KT5135 225 - 600 (70 - 180) .001 - .010 (0,03 - 0,25)

cast ironKC5035 150 - 650 (50 - 200) .003 - .012 (0,08 - 0,30)KT5135 225 - 850 (70 - 260) .001 - .010 (0,03 - 0,25)

non-ferrous KC5035 500 - 1500 (150 - 460) .004 - .018 (0,01 - 0,46)

high-temp alloys KC5035 50 - 300 (15 - 90) .004 - .018 (0,01 - 0,46)

material

Tooling Applications

C1 K25, K35,C5 M30, M40,

P25, P45

C2 K25, K35,C5 M30, M40,

P25, P45

127

Insert Identification System

16 03

G20 –T

R 033

1.Type of Insert 3.

Insert Usage

6.Hand of Insert

T = on-edge triangleV = 35° rhombicS = laydown

backturning insert

G = plunge groovingP = profiling/backturningT = threading

R = rightL = left

4.Insert Size

insert size d(mm) (mm)0,6 6,3513 7,9416 9,52522 12,70

5.Insert Thickness

2.EffectiveCutting Angle

03 3,18

symbolsize(mm)

02 = 2°10 = 10°20 = 20°30 = 30°

7.Width orNose Radiuswidth on groovinginserts and noseradius on backturninginserts in 0,01 of mm.

3 2 R 0136.Hand of Insert

R = rightL = left

4.Insert Size

insert size dinch inch

2 .252.5 .31253 .3754 .500

5.Insert Thickness

symbolsizeinch

2 .125

7.Width orNose Radiuswidth on groovinginserts and nose radiuson backturning insertsin .001 of an inch.

METRIC INSERTS

INCH INSERTS

128

®Backturning, Cutoff,Threading, and GroovingLaydown Backturning

On-Edge Backturning




KT5

135

steel

stainless steel

cast iron

non-ferrous

high-temp alloys

T02P metric

T02P 16 03 R000 9,525 0,03 3,18 4,40 2,50 � �T02P 16 03 L000 9,525 0,03 3,18 4,40 2,50 � �

T02P 16 03 R005 9,525 0,05 3,18 4,40 2,50 � �T02P 16 03 L005 9,525 0,05 3,18 4,40 2,50 � �

T02P 16 03 R010 9,525 0,10 3,18 4,40 2,50 � �T02P 16 03 L010 9,525 0,10 3,18 4,40 2,50 � �

T02P 16 03 R015 9,525 0,15 3,18 4,40 2,50 � �T02P 16 03 L015 9,525 0,15 3,18 4,40 2,50 � �

inch

T02P-32R001 .375 .001 .125 .173 .098 � �T02P-32L001 .375 .001 .125 .173 .098 � �

T02P-32R002 .375 .002 .125 .173 .098 � �T02P-32L002 .375 .002 .125 .173 .098 � �

T02P-32R004 .375 .004 .125 .173 .098 � �T02P-32L004 .375 .004 .125 .173 .098 � �

T02P-32R006 .375 .006 .125 .173 .098 � �T02P-32L006 .375 .006 .125 .173 .098 � �

KC

5035

grades

� – stocked▫ – limited stock

d rε s d1maximum

depth of cut

catalog number





KT5

135

steel

stainless steel

cast iron

non-ferrous

high-temp alloys

S10P metric

S10P 06 03 R005 6,350 0,05 3,18 3,00 3,00 � �S10P 06 03 L005 6,350 0,05 3,18 3,00 3,00 � �

S10P 06 03 R010 6,350 0,10 3,18 3,00 3,00 � �S10P 06 03 L010 6,350 0,10 3,18 3,00 3,00 � �

S10P 06 03 R015 6,350 0,15 3,18 3,00 3,00 � �S10P 06 03 L015 6,350 0,15 3,18 3,00 3,00 � �

inch

S10P-22R002 .250 .002 .125 .118 .118 � �S10P-22L002 .250 .002 .125 .118 .118 � �

S10P-22R004 .250 .004 .125 .118 .118 � �S10P-22L004 .250 .004 .125 .118 .118 � �

S10P-22R006 .250 .006 .125 .118 .118 � �S10P-22L006 .250 .006 .125 .118 .118 � �

d rε s d1maximum

depth of cut

KC

5035

grades


catalog number


129

Backturning, Cutoff,Threading, and GroovingOn-Edge Threading

On-Edge Cutoff

catalog number





KT5

135

steel

stainless steel

cast iron

non-ferrous

high-temp alloys

T30T metric

T30T 16 03 005R 9,525 0,05 3,18 4,4 � �T30T 16 03 005L 9,525 0,05 3,18 4,4 � �

T30T 16 03 010R 9,525 0,10 3,18 4,4 � �T30T 16 03 010L 9,525 0,05 3,18 4,4 � �

inch

T30T-32002R .375 .002 .125 .173 � �T30T-32002L .375 .002 .125 .173 � �

T30T-32004R .375 .004 .125 .173 � �T30T-32004L .375 .004 .125 .173 � �

rεd d1s

KC

5035


Thread per inch range (tpi) is 25 to 50.Thread pitch range is 0,5 mm to 1,0 mm.



... Preferred choice for unfavorable conditionsK

T513

5

steel

stainless steel

cast iron

non-ferrous

high-temp alloys

V10G metric

V10G 13 03 R100 7,94 1,00 * 6,00 3,18 3,40 5,50 � �V10G 13 03 L100 7,94 1,00 * 6,00 3,18 3,40 5,50 � �

V10G 13 03 R150 7,94 1,50 * 6,00 3,18 3,40 5,50 � �V10G 13 03 L150 7,94 1,50 * 6,00 3,18 3,40 5,50 � �

inch

V10G-2.52R039 .313 .039 * .236 .125 .134 .217 � �V10G-2.52L039 .313 .039 * .236 .125 .134 .217 � �

V10G-2.52R059 .313 .059 * .236 .125 .134 .217 � �V10G-2.52L059 .313 .059 * .236 .125 .134 .217 � �

d w rε e s d1 max doc

KC

5035


catalog number


*Sharp corner

130

®Backturning, Cutoff,Threading, and GroovingOn-Edge Grooving Inserts

dimensions

KT5

135

T20G metric

T20G 16 03 R033 9,525 0,33 0,03 0,80 3,18 4,40 0,70 � �T20G 16 03 L033 9,525 0,33 0,03 0,80 3,18 4,40 0,70 � �

T20G 16 03 R050 9,525 0,50 0,03 1,20 3,18 4,40 1,10 � �T20G 16 03 L050 9,525 0,50 0,03 1,20 3,18 4,40 1,10 � �

T20G 16 03 R075 9,525 0,75 0,03 2,00 3,18 4,40 1,90 � �T20G 16 03 L075 9,525 0,75 0,03 2,00 3,18 4,40 1,90 � �

T20G 16 03 R095 9,525 0,95 0,03 2,00 3,18 4,40 1,90 � �T20G 16 03 L095 9,525 0,95 0,03 2,00 3,18 4,40 1,90 � �

T20G 16 03 R100 9,525 1,00 0,05 2,20 3,18 4,40 2,1 � �T20G 16 03 L100 9,525 1,00 0,05 2,20 3,18 4,40 2,1 � �

T20G 16 03 R125 9,525 1,25 0,05 2,20 3,18 4,40 2,1 � �T20G 16 03 L125 9,525 1,25 0,05 2,20 3,18 4,40 2,1 � �

T20G 16 03 R145 9,525 1,45 0,05 2,20 3,18 4,40 2,1 � �T20G 16 03 L145 9,525 1,45 0,05 2,20 3,18 4,40 2,1 � �

T20G 16 03 R150 9,525 1,50 0,05 2,20 3,18 4,40 2,1 � �T20G 16 03 L150 9,525 1,50 0,05 2,20 3,18 4,40 2,1 � �

T20G 16 03 R175 9,525 1,75 0,05 2,20 3,18 4,40 2,1 � �T20G 16 03 L175 9,525 1,75 0,05 2,20 3,18 4,40 2,1 � �

T20G 16 03 R200 9,525 2,00 0,05 2,70 3,18 4,40 2,6 � �T20G 16 03 L200 9,525 2,00 0,05 2,70 3,18 4,40 2,6 � �

T20G 16 03 R250 9,525 2,50 0,05 2,70 3,18 4,40 2,6 � �T20G 16 03 L250 9,525 2,50 0,05 2,70 3,18 4,40 2,6 � �

inch

T20G-32R013 .375 .013 .001 .031 .125 .173 .028 � �T20G-32L013 .375 .013 .001 .031 .125 .173 .028 � �

T20G-32R020 .375 .020 .001 .047 .125 .173 .043 � �T20G-32L020 .375 .020 .001 .047 .125 .173 .043 � �

T20G-32R030 .375 .030 .001 .079 .125 .173 .075 � �T20G-32L030 .375 .030 .001 .079 .125 .173 .075 � �

T20G-32R037 .375 .037 .001 .079 .125 .173 .075 � �T20G-32L037 .375 .037 .001 .079 .125 .173 .075 � �

T20G-32R039 .375 .039 .002 .087 .125 .173 .083 � �T20G-32L039 .375 .039 .002 .087 .125 .173 .083 � �

T20G-32R049 .375 .049 .002 .087 .125 .173 .083 � �T20G-32L049 .375 .049 .002 .087 .125 .173 .083 � �

T20G-32R057 .375 .057 .002 .087 .125 .173 .083 � �T20G-32L057 .375 .057 .002 .087 .125 .173 .083 � �

T20G-32R059 .375 .059 .002 .087 .125 .173 .083 � �T20G-32L059 .375 .059 .002 .087 .125 .173 .083 � �

T20G-32R069 .375 .069 .002 .087 .125 .173 .083 � �T20G-32L069 .375 .069 .002 .087 .125 .173 .083 � �

T20G-32R079 .375 .079 .002 .106 .125 .173 .102 � �T20G-32L079 .375 .079 .002 .106 .125 .173 .102 � �

T20G-32R098 .375 .098 .002 .106 .125 .173 .102 � �T20G-32L098 .375 .098 .002 .106 .125 .173 .102 � �

dw

+0,05 mm(+.002 inch)

rε e s d1 max. doc

KC

5035

grades




steel

stainless steel

cast iron

non-ferrous

high-temp alloys


catalog number


131

Micro Boring Bar Insertspage

Boring Inserts

A-Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132-133B-Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

Indexable Screw-On Inserts

80° Diamond. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134Threading and Grooving . . . . . . . . . . . . . . . . . . . . . 13545° Diamond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136Triangle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136-138Trigon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138

APD – Profiling

dimensions

Dmin I I1 fcatalog number

KD

100

KC

610

KB

5625

grades

APD-062-187R .062 .837 .187 .025 .017 .007 �

APD-094-281R .094 .931 .281 .041 .028 .007 �

APD-125-375R .125 1.025 .375 .057 .040 .007 �

APD-156-500R .156 1.150 .500 .073 .050 .007 �

t R

132

®

NOTE: For sfm guidelines for specific materials, refer to KENNA PERFECT Selection System on pages 24-31 and page 633 in Catalog 1010.

Boring Inserts for Micro Boring Bars

dimensions

ABD – Boring ABD-062-187R .062 .837 .187 .026 �ABD-062-312R .062 .962 .312 .026 �

ABD-094-281R .094 .931 .281 .041 �ABD-094-500R .094 1.150 .500 .041 � � �

ABD-125-375R .125 1.025 .375 .057 �ABD-125-625R .125 1.275 .625 .057 � � �

ABD-156-500R .156 1.150 .500 .073 �ABD-156-875R .156 1.525 .875 .073 � � �


KD

100

KC

610

KB

5625

grades

A-Series

AGD – Grooving

dimensions


KD

100

KC

610

KB

5625

grades

AGD-095-030R .110 .962 .312 .046 .025 .030 �

AGD-125-040R .140 1.025 .375 .061 .030 .040 �

AGD-156-050R .175 1.150 .500 .076 .045 .050 �

t a


133

Boring Inserts for Micro Boring Bars


A-Series

B-Series

ATD – Threading

dimensions


KD

100

KC

610

KB

5625

grades

ATD-095-312R .098 .962 .312 .046 .022 48 - 32 �

ATD-125-375R .104 1.025 .375 .061 .027 48 - 24 �

ATD-156-500R .171 1.150 .500 .076 .032 48 - 20 �

t tpi


dimensions

BB – Boring


KD

100

KC

610

KB

5625

grades

BB-187-0750R .187 1.800 .750 .088 �BB-187-1250R .187 2.300 1.250 .088 �

BB-250-1000R .250 2.050 1.000 .120 �BB-250-1750R .250 2.800 1.750 .120 �

BB-312-1250R .312 2.300 1.250 .151 �BB-312-2125R .312 3.175 2.125 .151 �

dimensions

BP – Profiling


KD

100

KC

610

KB

5625

grades

BP-187-385R .187 1.650 .600 .088 .062 �

BP-250-825R .250 1.875 .825 .120 .078 �

BP-312-1000R .312 2.050 1.000 .151 .094 �

t

gradesdimensions

KC

5010

KC

5025

KB

5625

KD

100

KT3

15

CDHH

d1 l s Rcatalog number


CDHH-1.20.60.5R* .156 .158 .040 .008 � � �CDHH-1.20.60.5L* .156 .158 .040 .008 � � �

CDHH-1.20.61R* .156 .158 .040 .015 � � �CDHH-1.20.61L* .156 .158 .040 .015 � � �

dimensions grades

KC

5010

KC

5025

KB

5625

KD

100

KT3

15

CDHB


CDHB-1.20.60.1 .156 .158 .040 .002 � � � � �CDHB-1.20.60.5 .156 .158 .040 .008 � � � � �CDHB-1.20.61 .156 .158 .040 .015 � � � � �

gradesdimensions

KC

5010

KC

5025

KB

5625

KD

100

KT3

15

CPCA


CPCA-210.5 .250 .254 .075 .008 � � �CPCA-211 .250 .254 .075 .015 � � �

134

®


Indexable Inserts80° Diamond – Screw-On

*NOTE: Left-hand inserts must be used in right-hand bars only. Right-hand inserts must be used in left-hand bars only.� – stocked▫ – limited stock

135

Indexable Inserts


Grooving Screw-On

Threading Screw-On


KC

5010

KC

5025

KB

5625

KD

100

KT3

15

CDG

d1 s t acatalog number

CDG-1.2-015-2R .156 .050 .020 .015 �CDG-1.2-020-2R .156 .050 .025 .020 �CDG-1.2-025-2R .156 .050 .040 .025 �CDG-1.2-030-2R .156 .050 .040 .030 �CDG-1.2-040-2R .156 .050 .040 .040 �

KC

5010

KC

5025

KB

5625

KD

100

KT3

15

CPG

d1 s t acatalog number


CPG-2-030-2R .250 .075 .065 .030 �CPG-2-030-2L .250 .075 .065 .030 �

CPG-2-060-2R .250 .075 .065 .060 �CPG-2-060-2L .250 .075 .065 .060 �

dimensions grades

dimensions grades

KC

5010

KC

5025

KB

5625

KD

100

KT3

15

CDT

d1 s t Rcatalog number

CDT-1.2-002-2R .156 .050 .025 .002 �

KC

5010

KC

5025

KB

5625

KD

100

KT3

15

CPT

d1 s t Rcatalog number


CPT-2-005-2R .250 .075 .065 .005 �CPT-2-005-2L .250 .075 .065 .005 �

dimensions grades

dimensions grades

KC

5010

KC

5025

KB

5625

KD

100

KT3

15

TDHH

d1 I s Rcatalog number


TDHH-1.280.750.5R .160 .277 .047 .008 � � �TDHH-1.280.750.5L .160 .277 .047 .008 � � �

TDHH-1.280.751R .160 .277 .047 .015 � � �TDHH-1.280.751L .160 .277 .047 .015 � � �

TDHH-1.280.752R .160 .277 .047 .031 � � �TDHH-1.280.752L .160 .277 .047 .031 � � �

dimensions grades

Note: Left-hand inserts must be used in right-hand bars only. Right-hand inserts must be used in left-hand bars only.

136

®Indexable Inserts


45° Diamond – Screw-On

Triangle Screw-On

gradesdimensions

KC

5010

KC

5025

KB

5625

KD

100

KT3

15

GPCD


GPCD-50.5 .156 .209 .062 .008 � � �GPCD-51 .156 .209 .062 .015 � � �

KC

5010

KC

5025

KB

5625

KD

100

KT3

15

TPCG



TPCG-220.5R .250 .433 .096 .008 � � �TPCG-220.5L .250 .433 .096 .008 � � �

TPCG-221R .250 .433 .096 .015 � � �TPCG-221L .250 .433 .096 .015 � � �

TPCG-222R .250 .433 .096 .031 � � �TPCG-222L .250 .433 .096 .031 � � �

TPCG-320.5R .375 .630 .127 .008 � � �TPCG-320.5L .375 .630 .127 .008 � � �

TPCG-321R .375 .630 .127 .015 � � �TPCG-321L .375 .630 .127 .015 � � �

TPCG-322R .375 .630 .127 .031 � � �TPCG-322L .375 .630 .127 .031 � � �

dimensions grades

Note: Left-hand inserts must be used in right-hand bars only. Right-hand inserts must be used in left-hand bars only.� – stocked▫ – limited stock

137

Indexable Inserts


Triangle Screw-On

KC

5010

KC

5025

KB

5625

KD

100

KT3

15

TDHB


TDHB-1.280.750.1 .160 .277 .047 .002 � � � � �TDHB-1.280.750.5 .160 .277 .047 .008 � � � � �TDHB-1.280.751 .160 .277 .047 .015 � � � � �TDHB-1.280.752 .160 .277 .047 .031 � � � � �

dimensions grades


TD-P TD-6P0.1 .375 .630 .127 .002 � � � � �TD-6P0.5 .375 .630 .127 .008 � � � � �TD-6P1 .375 .630 .127 .015 � � � � �TD-6P2 .375 .630 .127 .031 � � � � �

TPCB TPCB-220.1 .250 .433 .096 .002 � � � � �TPCB-220.5 .250 .433 .096 .008 � � � � �TPCB-221 .250 .433 .096 .015 � � � � �TPCB-222 .250 .433 .096 .031 � � � � �

Trigon Screw-On

KC

5010

KC

5025

KB

5625

KD

100

KT3

15

TPCH


TPCH-220.5 .250 .433 .096 .008 � � �TPCH-221 .250 .433 .096 .015 � � �

dimensions

dimensions

grades

KC

5010

KC

5025

KB

5625

KD

100

KT3

15

WPCT


WPGT-1.510UF .187 .128 .062 .004 �WPGT-1.510.5UF .187 .128 .062 .008 �

WPGT-21.50UF .250 .174 .094 .004 �WPGT-21.50.5UF .250 .174 .094 .008 �

TPGH TPGH-321 .375 .630 .127 .015 � � �TPGH-322 .375 .630 .127 .031 � � �

grades

138

®Indexable Inserts


Triangle Screw-On


139

Table of Contents

Clamping Units . . . . . . . . . . . . . . 141

Cutting Units . . . . . . . . . . . . . . . . . . 144

Systems Tooling. . . . . . . . . . . . . . . . . . 158

Spares and Accessories . . . . . . . . . . . . 161

page

Kennametal has again developed a revolutionary quick-change tooling systemin introducing KM Micro — an evolution of the world-renowned KM® design, but smallerand more compact. KM Micro is designed to fit most Swiss-style turning centers,smaller lathes, and screw machines. The

quick-change interchangeable heads save tool index and setuptime by as much as 80%!

Our unique flange mounting system enables you to add an additional one to three tool positions on a single dedicated toolblock, resulting in increased tool capacity on your existingmachine. Another benefit is the rigid nature of the dedicatedtoolblock. By elimination of the tool slots, you receive added stiffness during deep turning operations.

The new KM Micro square shank holdersenable easy and quick installation intoyour existing toolblock. Simply remove the existing toolholder, replace it witha KM Micro retrofit toolholder, andyou’re up and running!

Kennametal offers you the industry’s most comprehensiveselection of high-performance micro-machining solutions!

Whether you‘re machining a very small workpart orlarge workparts with small holes and turned diameters,Kennametal has a complete range of high-performancemicro-machining tooling to meet your needs.

actual size

TM

KM Micro is a compact interchangeablecutting unit system.

Face and taper contact between cuttingunit and clamping unit.

Coincidental cone clamping design.

Simple, yet effective, clampingmechanism.

5/8" (16 mm) square shank retrofitunits for standard slotted toolblocks.

Unique flange mount system is aversatile alternative to square shankretrofit toolholders.

Flange-mount units come in a variety ofconfigurations with and without coolantports.

Inserts are changed off the machine,resulting in up to 60% reduction in timeto change the cutting tip. Machine setuptime can be reduced by up to 80%.

Highly accurate face and taper contactreduces or eliminates the need for trialcuts. Tooling can be pregaged thenloaded in the machine. Simply enter thedeviations/offsets into the machinecontrol, and you’re ready to run.

Maximum surface area contact provideslong service life. Shared access conedesign delivers high radial repeatability,which in turn provides accurate centerheight repeatability. Positive rear tapercontact increases rigidity and stability.

KM Micro cutting units are easy tochange. The clamping design offers anefficient mechanical advantage thatproduces a high clamping force with verylow input force.

No special tool adapters or blocks arerequired when installing or retrofitting the system to your machine.

Tool capacity on your existing machine isincreased, in some cases up to threeadditional tool positions. Elimination oftoolholder slots provides increasedtoolblock stiffness and rigidity.

The toolblock/flange combination can beoptimized to suit the requirements of aparticular machine or workpiece family.

Features

Benefits

Simply remove the quick-change cuttingunit from the toolholder and replace it witha cutting unit that contains a new insert.

Coincidental cone design maximizes the contact area between the clampingmechanism and the cutting unit. As aresult, the cutting unit and clampingmechanism are on a shared axis andprovide accurate radial location. Conedesign enables positive spreading ofthe rear portion of the taper to ensurecontact during clamping.

The combination of face and taper contactprovides an accurate and repeatable inserttip location in both cutting axes.

Clamping units are designed to industrystandard sizes and fit the machine toolslot or tool post for square-shanktoolholders. Simply remove the existingtoolholder, install a KM Microreplacement toolholder, and you’re upand running. Square shank units aredesigned to accept cutting units in twoorientations: the insert tip flush with theshank side (typical for Swiss-stylemachines), or the insert tip offset fromthe shank side (typical for machinesusing turrets).

The clamping screw is activated by atorque wrench at rightangle to the centerline ofthe cutting tool, behindthe gage face of theclamping unit. To releasethe clamping unit, simplyreverse the Torx screw. Atorque of 8 ft.-lbs. or 10Nm and three turns of theactivation screw arerequired to lock and unlock the unit.

Square Shank Mount System

Flange Mount System

Super Tight StackingMount System

Flange mount units can be installedon new machines or retrofitted toexisting machines. Dedicatedflange-mount toolblocks enableadditional tool positions to be usedwithin the same conventionaltoolblock envelope.

Kennametal offers a variety of standardflange-mount units to satisfy thedifferent turret and toolblockconfigurations and combinations formost of today’s machines.

(actual size)

(magnified 100%)

(magnified 100%)

1

2

3

4

5

6

7

1

2

3

4

5

6

7

1

2

3

4

5

6

6

7

7

FunctionS

140

KM Micro Clamping Units

141

Clamping Unit – Square Shank Replacement

Wrench

KM sizedKM

catalog number

TWT256R 12 T25 5 - 6 ft. lbs.

TWT278R 16 T27 7 - 8 ft. lbs.

Torx size torque setting

NCM/RCM/LCM

l1handKM sizedKM

catalog number bf1 h spare parts

metric

KM12-NCM-1212-100 12 neutral 100,0 8,00 12,00 12,00 KM12-NSPKG T25

KM16-NCM-1616-95 16 neutral 95,00 10,00 16,00 16,00 KM16-NSPKG T27KM16-NCM-1616-105 16 neutral 105,00 10,00 16,00 16,00 KM16-NSPKG T27

inch

KM12-RCM-08-400 12 right hand 4.000 .315 .500 .500 KM12-NSPKG T25KM12-LCM-08-400 12 left hand 4.000 .315 .500 .500 KM12-NSPKG T25

KM16-NCM-10-382 16 neutral 3.819 .394 .625 .625 KM16-NSPKG T27KM16-NCM-10-421 16 neutral 4.213 .394 .625 .625 KM16-NSPKG T27

NCM SS

d2d1KM size

dKMcatalog number l1 l2 spare parts

metric

KM12-NCM-SS19-14 12 19,00 25,00 100,00 14,00 KM12-NRPKG T25

KM16-NCM-SS20-16 16 20,00 26,00 100,00 16,00 KM16-NRPKG T27KM16-NCM-SS22-16 16 22,00 28,00 100,00 16,00 KM16-NRPKG T27

inch

KM12-NCM-SS12-055 12 .750 .984 3.937 .551 KM12-NRPKG T25

KM16-NCM-SS12-063 16 .750 .984 3.937 .630 KM16-NRPKG T27KM16-NCM-SS16-063 16 1.000 1.260 3.937 .630 KM16-NRPKG T27

142

®KM Micro Clamping UnitsKM Micro Flanges

KM sizedKM

coolant d1 l1 l2 h1 h2 p1catalog numberspare parts

mounting bolts(2 req’d)

spare partspackage

catalog numberspare parts


spare partspackage

*Non-stocked standards

KM16-NCM-SF2726* 16 No .551 .630 .866 1.063 .531 1.024 MS-337 (M6 x 20 SHCS) KM16-NRPKG T27KM16-NCM-SEF2726* 16 No .551 1.024 1.260 1.063 .531 1.024 MS-337 (M6 x 20 SHCS) KM16-NRPKG T27

KM sizedKM

coolant d1 l1 l2 h1 h2 p1

KM16-NCM-SF2728* 16 Yes .551 .630 .866 1.063 .531 1.102 MS-337 (M6 x 20 SHCS) KM16-NRPKG T27KM16-NCM-SEF2728* 16 Yes .551 1.024 1.260 1.063 .531 1.102 MS-337 (M6 x 20 SHCS) KM16-NRPKG T27

143

KM Micro Clamping Units

catalog numberspare parts


spare partspackage

KM Micro Flanges

KM16-NCM-SF1932* 16 Yes .551 .630 .866 .748 .374 1.260 MS-319 (M4 x 20 SHCS) KM16-NRPKG T27KM16-NCM-SEF1932* 16 Yes .551 1.024 1.260 .748 .374 1.260 MS-319 (M4 x 20 SHCS) KM16-NRPKG T27

catalog number

KM12-NCM-SF1522 12 No .394 .551 .709 .620 .310 .866 125.316 (M3 x 16) KM12-NRPKG T25

KM16-NCM-SF1928 16 No .551 .630 .866 .748 .374 1.102 MS-319 (M4 x 20 SHCS) KM16-NRPKG T27KM16-NCM-SEF1928 16 No .551 1.024 1.260 .748 .374 1.102 MS-319 (M4 x 20 SHCS) KM16-NRPKG T27

spare partsmounting bolts

(4 req’d)

spare partspackage

*Non-stocked standards

KM sizedKM


KM sizedKM


144

®KM Micro Cutting UnitsKenloc Pin/Clamp Combination

MCL 95°

l1catalog number


MDJ 93°

fKM sizedKM

catalog numberright hand left hand

KM16-MCLNR09 KM16-MCLNL09 16 1.181 .394 CNMG 322 ICSN-332 KLM-34L-T9 CKM-7LP STCM-9-T9 T9

KM16-MCLNR12 KM16-MCLNL12 16 1.181 .394 CNMG 432 ICSN-432 KLM-46L-T15 CKM-20LP STCM-11-T15 T15

l1catalog number

right hand left handfKM size

dKM


KM16-MDJNR11 KM16-MDJNL11 16 1.181 .394 DNMG 332 IDSN-322 KLM-34L-T9 CKM-7LP STCM-9-T9 T9

See pages 34-36 for inserts.


145

KM Micro Cutting UnitsKenloc Pin/Clamp CombinationMSD 45°

MTG 90°

l1catalog number


dKMcatalog number

KM16-MSDNN09 16 1.181 0 SNMG 322 ISSN-322 KLM-34L-T9 CKM-7LP STCM-9-T9 T9

l1catalog number


dKM


KM16-MTGNR16 KM16-MTGNL16 16 1.181 .394 TNMG 332 ITSN-322 KLM-34L-T9 CKM-7LP STCM-9-T9 T9



146

®KM Micro Cutting Units

SCG 90°

fl1KM size

dKM


SCL 95°

fl1KM size

dKM


Screw-On Inserts

KM12-SCGCR09 KM12-SCGCL09 12 .591 .315 CCMT-32.52 MS-1155 — — T15KM12-SCGCR12 KM12-SCGCL12 12 .787 .315 CCMT-432 MS-1157 — — T15

KM16-SCGCR09 KM16-SCGCL09 16 .787 .394 CCMT-32.52 MS-1156 SKCP-343 SRS-3 T15KM16-SCGCR12 KM16-SCGCL12 16 .787 .394 CCMT-432 MS-1157 — — T15

KM12-SCLCR09 KM12-SCLCL09 12 .591 .315 CCMT-32.52 MS-1155 — — T15KM12-SCLCR12 KM12-SCLCL12 12 .787 .315 CCMT-432 MS-1157 — — T15

KM16-SCLCR09 KM16-SCLCL09 16 .787 .394 CCMT-32.52 MS-1156 SKCP-343 SRS-3 T15KM16-SCLCR12 KM16-SCLCL12 16 .787 .394 CCMT-432 MS-1157 — — T15



147


SCM 50°

KM12-SCMCN09 12 .787 0 CCMT-32.52 MS-1155 — — T15

KM16-SCMCN09 16 .787 0 CCMT-32.52 MS-1156 SKCP-343 SRS-3 T15

catalog number

SDG 90°

Screw-On Inserts

fl1KM size

dKM


fl1KM size

dKM

KM12-SDGCR11 KM12-SDGCL11 12 .787 .315 DCMT-32.52 MS-1155 — — T15

KM16-SDGCR11 KM16-SDGCL11 16 .787 .394 DCMT-32.52 MS-1156 SKDP-343 SRS-3 T15



148


SDJ 93°

SDP 62° 30'

Screw-On Inserts

KM12-SDPCN 11 12 .984 0 DCMT-32.52 MS-1155 — — T15

KM16-SDPCN 11 16 1.181 0 DCMT-32.52 MS-1156 SKDP-343 SRS-3 T15

catalog number fl1KM size

dKM


fl1KM size

dKM

KM12-SDJCR11 KM12-SDJCL11 12 .787 .315 DCMT-32.52 MS-1155 — — T15

KM16-SDJCR11 KM16-SDJCL11 16 .787 .394 DCMT-32.52 MS-1156 SKDP-343 SRS-3 T15



149


STG 90°

KM12-STGCR11 KM12-STGCL11 12 .591 .315 TCMT-21.51 MS-1153 — — T7KM12-STGCR16 KM12-STGCL16 12 .787 .315 TCMT-32.52 MS-1155 — — T15

KM16-STGCR11 KM16-STGCL11 16 .787 .394 TCMT-21.51 MS-1153 — — T7KM16-STGCR16 KM16-STGCL16 16 .787 .394 TCMT-32.52 MS-1156 SKTP-343 SRS-3 T15


STJ 93°

Screw-On Inserts

fl1KM size

dKM

KM12-STJCR11 KM12-STJCL11 12 .591 .315 TCMT-21.51 MS-1153 — — T7KM12-STJCR16 KM12-STJCL16 12 .787 .315 TCMT-32.52 MS-1155 — — T15

KM16-STJCR11 KM16-STJCL11 16 .787 .394 TCMT-21.51 MS-1153 — — T7KM16-STJCR16 KM16-STJCL16 16 .787 .394 TCMT-32.52 MS-1156 SKTP-343 SRS-3 T15


fl1KM size

dKM



150


SVG 90°

KM12-SVGBR11 KM12-SVGBL11 12 .787 .315 VBMT-221 MS-1153 T7

KM16-SVGBR16 KM16-SVGBL16 16 1.181 .394 VBMT-332 MS-1155 T15


SVJ 93°

Screw-On Inserts

fl1KM size

dKM

KM12-SVJBR11 KM12-SVJBL11 12 .787 .315 VBMT-221 MS-1153 T7

KM16-SVJBR11 KM16-SVJBL11 16 .787 .394 VBMT-221 MS-1153 T7KM16-SVJBR16 KM16-SVJBL16 16 1.181 .394 VBMT-332 MS-1155 T15

catalog numberright hand left hand fl1

KM sizedKM



151


SWL 95°

NKL 95°

fl1KM size

dKM

KM12-NKLCR11 12 .984 .315 NPGR-51R SM-885 — SRS-3 CM-68 MS-1220 T25KM12-NKLCL11 12 .984 .315 NPGR-51L — SM-886 SRS-3 CM-68 MS-1220 T25

KM16-NKLCR11 16 1.181 .394 NPGR-51R SM-885 — SRS-3 CM-68 MS-1220 T25KM16-NKLCL11 16 1.181 .394 NPGR-51L — SM-886 SRS-3 CM-68 MS-1220 T25


Screw-On Inserts

Top Notch Profiling


fl1KM size

dKM

KM12-SWLCR06 KM12-SWLCL06 12 .591 .315 WCMT 32.52 MS-1155 — — T15

KM16-SWLCR06 KM16-SWLCL06 16 .787 .394 WCMT 32.52 MS-1156 SKWP-343 SRS-3 T15

See page 58 for inserts.


152


SSP

fl1KM size

dKM

KM12-SSPR06 12 .591 .211 S10P-22R... CSTB-2.5 T8KM12-SSPL06 12 .591 .211 S10P-22L... CSTB-2.5 T8

KM16-SSPR06 16 .787 .289 S10P-22R... CSTB-2.5 T8KM16-SSPL06 16 .787 .289 S10P-22L... CSTB-2.5 T8


STP

Backturning

fl1KM size

dKM




KM12-STPR16 12 .787 .172 T02P-32R... CSTB-4SD T8KM12-STPL16 12 .787 .172 T02P-32L... CSTB-4SD T8

KM16-STPR16 16 .787 .251 T02P-32R... CSTB-4SD T8KM16-STPL16 16 .787 .251 T02P-32L... CSTB-4SD T8

fl1

153


STG Grooving

KM12-STGR16 12 .787 .315 T20G32R… CSTB-4SD T8KM12-STGL16 12 .787 .315 T20G32L… CSTB-4SD T8

KM16-STGR16 16 .787 .394 T20G32R… CSTB-4SD T8KM16-STGR16 16 .787 .394 T20G32L… CSTB-4SD T8


STT Threading

On-Edge Threading and Grooving

KM sizedKM

catalog numberright hand left hand fl1

KM sizedKM

See page 130for inserts.


KM12-STTR16 12 .787 .291 T30T32002R CSTB-4SD T8KM12-STTL16 12 .787 .291 T30T32002L CSTB-4SD T8

KM16-STTR16 16 .787 .370 T30T32002R CSTB-4SD T8KM16-STTL16 16 .787 .370 T30T32002L CSTB-4SD T8

fl1KM size

dKM

154


NE

KM16-NER2 16 .787 .394 NG-2L CM-147 MS-1200 T10KM16-NEL2 16 .787 .394 NG-2R CM-146 MS-1200 T10


NS

fl1KM size

dKM

KM12-NSR2 12 .787 .315 NG-2R CM-146 MS-1200 T10KM12-NSL2 12 .787 .315 NG-2L CM-147 MS-1200 T10

KM16-NSR2 16 .787 .394 NG-2R CM-146 MS-1200 T10KM16-NSL2 16 .787 .394 NG-2L CM-147 MS-1200 T10

KM16-NSR3 16 1.181 .394 NG-3R CM-168 MS-1220 T25KM16-NSL3 16 1.181 .394 NG-3L CM-169 MS-1220 T25


Top Notch Threading and Grooving

RH LH

RH LH

See pages 72-76 and 104-110 for inserts.

See pages 72-76 and 104-110 for inserts.

155


LSS

fl1KM size

dKM

KM16-LSSR16 16 .787 .394 LT-16ER S-SA3T SM-YE3 CK-C3 T10KM16-LSSL16 16 .787 .394 LT-16EL S-SA3T SM-YI3 CK-C3 T10


Laydown Threading

A3S

e f w hl1KM size

dKM

KM12-A3SR311 KM12-A3SL311 12 1.181 .472 .315 .118 .236 A3G0300M03 MS-1944 T25

KM16-A3SR311 KM16-A3SL311 16 1.181 .472 .394 .118 .315 A3G0300M03 MS-1944 T25KM16-A3SR411 KM16-A3SL411 16 1.181 .472 .394 .157 .315 A3G0400M04 MS-1944 T25


A3 Deep Grooving

See pages 84-96for inserts.


156


SVG

e f hl1KM size

dKM

KM12-SVGR13 12 .984 .236 .315 .236 V10G-2.52R... CSTB-3S T9KM16-SVGL13 12 .984 .236 .315 .236 V10G-2.52L... CSTB-3S T9

KM16-SVGR13 16 1.181 .236 .394 .315 V10G-2.52R... CSTB-3S T9KM16-SVGL13 16 1.181 .236 .394 .315 V10G-2.52L... CSTB-3S T9


A2S

Integral Cutoff

A2 Integral Cutoff

e f w hl1KM size

dKM

KM12-A2SR211 KM12-A2SL211 12 1.181 .472 .315 .087 .240 A2022... MS-1944 T25

KM16-A2SR211 KM16-A2SL211 16 1.181 .472 .394 .087 .319 A2022... MS-1944 T25KM16-A2SR216 KM16-A2SL216 16 1.181 .669 .394 .087 .319 A2022... MS-1944 T25




157


BS

j h A2 blademKM size

dKM

KM12-BSR KM12-BSL 12 .531 .272 .240 A2… 387019... MS-1898 T27

KM16-BSR KM16-BSL 16 .531 .350 .319 A2… 387019... MS-1898 T27


A2

we

387019-016-28 .650 .063 A2016...

387019-022-23 .453 .087 A2022...387019-022-28 .650 .087 A2022...

catalog number

A2 Modular Cutoff

A2 Blade – Cutoff

NOTE: Blade and insert must be ordered separately.

NOTE: These blades require careful insert installation using a plastic hammer. Assembly wrench 170.137 must be ordered separately and must be used for insert removal.



KM sizedKM

158

®KM Micro Systems Tooling

ER

d2d1 hl1

KM12-ER11-030M 12 .02 - .27 .630 1.181 .433 LER11M ER11WEM 20 ft lbsKM12-ER16-040M 12 .02 - .40 .866 1.575 .669 LER16M ER16WEM 30 ft lbs

KM16-ER11-030M 16 .02 - .27 .630 1.181 .512 LER11M ER11WEM 20 ft lbsKM16-ER16-040M 16 .02 - .40 .866 1.575 .669 LER16M ER16WEM 30 ft lbsKM16-ER20-045M 16 .02 - .51 1.102 1.772 .748 LER20M ER20WEM 35 ft lbs

catalog number

Collet Chucks

TIM

d2 hl1KM size

dKM

KM12-TIM-0915 12 .591 1.201 .354

KM16-TIM-1420 16 .787 1.457 .551

catalog number

Timing Heads

159

KM Micro Systems Tooling

TRA

d1 spare partsl1KM size

dKMtaper

CV40-KM12-TRA CV40 12 1.575 .866 KM12-NRPKG

CV40-KM16-TRA CV40 16 1.969 .984 KM16-NRPKG

catalog number

Presetter CV Shanks – on Center (Rotating)

ECTRA

f1 spare partsl1KM size

dKMtaper

CV40-KM12-ECTRA CV40 12 2.165 .236 KM12-NRPKG

CV40-KM16-ECTRA CV40 16 2.362 .315 KM16-NRPKG

catalog number

Presetter CV Shanks – Offset (Static Tools)

KM12-P 12 .197 .472

KM16-P 16 .197 .630

160

®KM Micro Systems Tooling

P

d1l1KM size

dKMcatalog number

BN

Plug

Blank

d1l1KM size

dKMcatalog number

KM12-BN31-33 12 1.299 1.201

KM16-BN37-40 16 1.575 1.457

NOTE: Should not be used as blank.

161

Center Height Adjustment Feature:

KM micro flange mounts can adjust insert center height via acam pin to be purchased separately. To do this:1. Remove the locating pin that is installed in the flange

mount clamping unit.

2. Install the adjusting pin in the toolblock-locating pin hole.

3. Install the flange mount clamping unit on to the toolblock, ensuring the cam portion of the adjusting pin locates within the slot on the back side of the flange.

4. To adjust, simply access the hex through the locating pin hole of the flange unit and rotate to set center height.

5. Tighten the mounting bolts to the required torque for the specific bolt size.

Lubrication:Using a Torx wrench, back out the screw against the stops and generously apply grease to the threads and conical surfaces ofthe components. Lightly apply a coating of grease to the taper surface. Gleitmo 805 is the recommended grease to use.

cap screwnuttorque screw

torque screw

nut cap screw

KM12-NSPKG � � �KM16-NSPKG � � �

catalog number

Spares and Accessories

locating pin

adjustingcam

nut pinnuttorque screw

KM12-NRPKG � � �KM16-NRPKG � � �

catalog number

KM size

1026196 12MICROCAM01 16

catalog number

nut pin

torque screw

nut

162

®Spares and Accessories

Torx T-handle wrenches

T-wrenches with plastic grip handles and Torx drive aredesigned for use with Kennametal toolholders. The individual T-wrenches are available from stock.

TT-15 TT20TT-25 TT-30

wrench driveconfiguration

Torx wrench

Torx wrenches are used with Kennametal productsthat use the Torx drive configuration in the screwhead. Wrenches (5 wrenches per bag) are shipped in a plastic hardware bag.

KT-5 KT-15KT-6 KT-20KT-7 KT-25KT-8 KT-27KT-9 KT-30KT-10 KT-40

KT-45wrench driveconfiguration

Torx flag-type wrench

Torx wrenches are used with Kennametal products that usethe Torx drive configuration in the screw head. Wrenches (5 wrenches per bag) are shipped in a plastic hardware bag.

wrench driveconfiguration

FT-5 FT-10FT-6 FT-10-15FT-7 FT-15FT-8 FT-15-3.5FT-9 FT-20

Torx drivers

In smaller sizes, Torx drivers can be somewhat easier to usethan the Torx flag-type wrenches shown above. Torx drivers areshipped individually in the sizes shown here.

Torx driver set

Torx drivers, as a set, come in the following sizes:DT-6, DT-7, DT-8, DT-9, DT-10, and DT-15.

catalog number

TWS-1

catalog number

catalog number

DT-6 DT-9DT-7 DT-10DT-8 DT-15 wrench drive

configuration

catalog number

catalog number

OD Tooling

page Toolholder Identification Systemfor OD Toolholders. . . . . . . . . . . . . . . 164

Toolholders

Screw-On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166

Top Notch Profiling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171

Top Notch Threading, Grooving, and Backturning. . . . . . . . . 172

LT Threading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173

A3 Deep Grooving and Profiling Toolholders. . . . . . . . . . . . . . . 174

A2 Cutoff Toolholders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176

Backturning, Cutoff, Grooving, and Threading . . . . . . . . . . . . . . 177

Toolholder Identification System forBackturning, Threading, Grooving, andCutoff Toolholders . . . . . . . . . . . . . . . . . . . . . . 178

Toolholders

Laydown Backturning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179

On-Edge Backturning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180

On-Edge Threading. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181

On-Edge Grooving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182

On-Edge Cutoff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183



163

164

®Toolholder Selection System

1.Insert Holding Method

2.Insert Shape

5.Hand of Tool

3.Tool Style or Lead Angle

4.Insert Clearance Angle

6.Additional InformationC — deep pocket for ceramic insertS — single pocket locating wallF — straight shank, no offset

*Kennametal standard only.

C D K

L R S

T V W

C N

P E

B D

B C D E

G H J K

M P Q R

U

A

F

L

T V Y

F

S C A R ▫C

Kenclamp®

topclamping

KL pin top and holeclamping

Top Notchclamping

screwclamping

K-Lock

Wedgelock® BP pin only

165

Identification System for Backturning, Cutoff, Grooving, and Threading Toolholders

Toolholder Identification System

–

7.ShankDimensions

8.Shank Width(mm)

8.Insert Size

INCH

METRIC

inch toolholders (two digits):square shanks: The numberindicates the toolholder crosssection in 1/16-inch increments.rectangular shanks: The first digitindicates the number of 1/8 inchesof width. The second digit indicatesthe number of 1/4 inches of height.

9.Tool Length

7.Shank Height(mm)

number of1/8ths of IC

B = qualified back and end, 4.5" longD = qualified back and end, 6" longZ = qualified back and end, 3.25" long

9.Qualified Surfaceand Length

Q = qualified back and endF = qualified front and endB = qualified front, back,

and end

F = 80 mmH = 100 mmK = 125 mmM = 150 mm

10.Insert Size(mm)

Qualified Set Dimensions

11.Tool Qualifications(mm)

cutting edgelength in mm

10–

–

3 B

16 16 F Q09

Lock Pin toolholders are qualified over nose radius of gage insert in accordance with ANSI standards.*Two-inch square shanks are qualified to ±.005.

Catalog numbers for utility toolholders are not overprinted with color.Tolerances are ±.010 on “f” dimension and ±.125 on “l1”.

Catalog numbers for qualified toolholders are overprinted with a shade of yellow.

NOTE: For Screw-On, Top Notch, LT threading, A3, and A2 toolholders,please refer to appropriate toolholder sections of this catalog.

166

®Screw-On Toolholders

SCAC

metric screw-on toolholders for Swiss Automatic machines

SCACR-0808M06Q � SCACL-0808M06Q � CCMT 06 02 04 8 8 150 12 8 1,5 — — MS-1153 FT-7SCACR-1010M06Q � SCACL-1010M06Q ▫ CCMT 06 02 04 10 10 150 11 10 — — — MS-1153 FT-7SCACR-1212M06Q ▫ SCACL-1212M06Q ▫ CCMT 06 02 04 12 12 150 11 12 — — — MS-1153 FT-7

SCACR-1216F09Q ▫ SCACL-1216F09Q ▫ CCMT 09 T3 08 16 12 82 16 16 — — — MS-1155 FT-15SCACR-1616K09Q � SCACL-1616K09Q ▫ CCMT 09 T3 08 16 16 125 16 16 — SKCP-343 SRS-3 MS-1156 FT-15-3.5

inch screw-on toolholders for Swiss Automatic machines

SCACR-04.52D ▫ SCACL-04.52D ▫ CCMT-21.51 .281 .281 6.000 .44 .281 .09 — — MS-1153 FT-7SCACR-052D � SCACL-052D � CCMT-21.51 .312 .312 6.000 .44 .312 .09 — — MS-1153 FT-7SCACR-062D � SCACL-062D � CCMT-21.51 .375 .375 6.000 .44 .375 — — — MS-1153 FT-7

SCACR-083D � SCACL-083D � CCMT-32.52 .500 .500 6.000 .62 .500 — — — MS-1155 FT-15SCACR-523Z � SCACL-523Z ▫ CCMT-32.52 .625 .500 3.250 .62 .625 — — — MS-1155 FT-15SCACR-103B � SCACL-103B � CCMT-32.52 .625 .625 4.500 .50 .625 — SKCP-343 SRS-3 MS-1156 FT-15-3.5

h b l1 l2 f b3



See pages 45-49 for additional insertgeometry styles.

SCLC-F


SCLCRF-0808M06Q � SCLCLF-0808M06Q � CCMT 06 02 04 8 8 150 12 8 1,5 — — MS-1153 FT-7SCLCRF-1010M06Q � SCLCLF-1010M06Q ▫ CCMT 06 02 04 10 10 150 11 10 — — — MS-1153 FT-7SCLCRF-1212M06Q � SCLCLF-1212M06Q ▫ CCMT 06 02 04 12 12 150 11 12 — — — MS-1153 FT-7

SCLCRF-1616K09Q � SCLCLF-1616K09Q � CCMT 09 T3 08 16 16 125 16 16 — SKCP-343 SRS-3 MS-1156 FT-15-3.5


SCLCRF-04.52D � SCLCLF-04.52D ▫ CCMT-21.51 .281 .281 6.000 .50 .281 .09 — — MS-1153 FT-7SCLCRF-052D � SCLCLF-052D � CCMT-21.51 .312 .312 6.000 .50 .312 .06 — — MS-1153 FT-7SCLCRF-062D � SCLCLF-062D � CCMT-21.51 .375 .375 6.000 .50 .375 — — — MS-1153 FT-7SCLCRF-082D � SCLCLF-082D � CCMT-21.51 .500 .500 6.000 .50 .500 — — — MS-1153 FT-7

SCLCRF-083D � SCLCLF-083D � CCMT-32.52 .500 .500 6.000 .62 .500 .09 — — MS-1155 FT-15SCLCRF-523Z � SCLCLF-523Z ▫ CCMT-32.52 .625 .500 3.250 .62 .625 — — — MS-1155 FT-15SCLCRF-103B � SCLCLF-103B � CCMT-32.52 .625 .625 4.500 .50 .625 — SKCP-343 SRS-3 MS-1156 FT-15-3.5

h b l1 l2 f b3



167

Screw-On Toolholders

SDAC


SDACR-0808M07Q � SDACL-0808M07Q � DCMT 07 02 04 8 8 150 16 8 1,5 — — MS-1153 FT-7SDACR-1010M07Q � SDACL-1010M07Q ▫ DCMT 07 02 04 10 10 150 16 10 — — — MS-1153 FT-7SDACR-1212M07Q � SDACL-1212M07Q ▫ DCMT 07 02 04 12 12 150 16 12 — — — MS-1153 FT-7

SDACR-1212M11Q � SDACL-1212M11Q � DCMT 11 T3 08 12 12 150 22 12 1,5 — — MS-1155 FT-15SDACR-1616K11Q � SDACL-1616K11Q ▫ DCMT 11 T3 08 16 16 125 22 16 — SKDP-343 SRS-3 MS-1156 FT-15-3.5


SDACR-062D � SDACL-062D � DCMT-21.51 .375 .375 6.000 .62 .375 — — — MS-1153 FT-7SDACR-082D � SDACL-082D � DCMT-21.51 .500 .500 6.000 .62 .500 — — — MS-1153 FT-7

SDACR-083D � SDACL-083D � DCMT-32.52 .500 .500 6.000 .88 .500 .06 — — MS-1155 FT-15SDACR-103B � SDACL-103B � DCMT-32.52 .625 .625 4.500 .88 .625 — SKDP-343 SRS-3 MS-1156 FT-15-3.5

h b l1 l2 f b3


SDJC-F


SDJCRF-0808M07Q � SDJCLF-0808M07Q � DCMT 07 02 04 8 8 150 16 8 1,5 — — MS-1153 FT-7SDJCRF-1010M07Q � SDJCLF-1010M07Q � DCMT 07 02 04 10 10 150 16 10 — — — MS-1153 FT-7SDJCRF-1212M07Q � SDJCLF-1212M07Q ▫ DCMT 07 02 04 12 12 150 16 12 — — — MS-1153 FT-7

SDJCRF-1616K11Q � SDJCLF-1616K11Q ▫ DCMT 11 T3 08 16 16 125 22 16 — SKDP-343 SRS-3 MS-1156 FT-15-3.5


SDJCRF-062D � SDJCLF-062D � DCMT-21.51 .375 .375 6.000 .62 .375 — — — MS-1153 FT-7SDJCRF-082D � SDJCLF-082D � DCMT-21.51 .500 .500 6.000 .62 .500 — — — MS-1153 FT-7

SDJCRF-083D � SDJCLF-083D � DCMT-32.52 .500 .500 6.000 .88 .500 — — — MS-1155 FT-15SDJCRF-103B � SDJCLF-103B � DCMT-32.52 .625 .625 4.500 .88 .625 — SKDP-343 SRS-3 MS-1156 FT-15-3.5

h b l1 l2 f b3





168


SDPC


SDPCN-1010M07Q � DCMT 07 02 04 10 10 150 16 5 — — MS-1153 FT-7SDPCN-1212M07Q � DCMT 07 02 04 12 12 150 16 6 — — MS-1153 FT-7SDPCN-1212M11Q � DCMT 11 T3 08 12 12 150 22 6 — — MS-1155 FT-15SDPCN-1616K11Q � DCMT 11 T3 08 16 16 125 22 8 SKDP-343 SRS-3 MS-1156 FT-15-3.5


SDPCN-062D � DCMT-21.51 .375 .375 6.000 .62 .188 — — MS-1153 FT-7SDPCN-082D � DCMT-21.51 .500 .500 6.000 .62 .250 — — MS-1153 FT-7

SDPCN-083D � DCMT-32.52 .500 .500 6.000 .88 .250 — — MS-1155 FT-15SDPCN-103B � DCMT-32.52 .625 .625 4.500 .88 .312 SKDP-343 SRS-3 MS-1156 FT-15-3.5

h b l1 l2 f


See pages 49-52for additional insertgeometry styles.

STAC


STACR-1010M11Q � STACL-1010M11Q � TCMT 11 02 04 10 10 150 16 10 2,5 — — MS-1153 FT-7STACR-1212M11Q � STACL-1212M11Q � TCMT 11 02 04 12 12 150 16 12 — — — MS-1153 FT-7STACR-1616K11Q � STACL-1616K11Q � TCMT 11 02 04 16 16 125 16 16 — — — MS-1153 FT-7

STACR-1616K16Q � STACL-1616K16Q � TCMT 16 T3 08 16 16 125 20 16 — SKTP-343 SRS-3 MS-1156 FT-15-3.5


STACR-062D � STACL-062D � TCMT-21.51 .375 .375 6.000 .62 .375 .09 — — MS-1153 FT-7STACR-082D � STACL-082D � TCMT-21.51 .500 .500 6.000 .62 .500 — — — MS-1153 FT-7STACR-102B � STACL-102B � TCMT-21.51 .625 .625 4.500 .62 .625 — — — MS-1153 FT-7

STACR-103B � STACL-103B � TCMT-32.52 .625 .625 4.500 .75 .625 — SKTP-343 SRS-3 MS-1156 FT-15-3.5

h b l1 l2 f b3




169

Screw-On Toolholders

STJC-F


STJCRF-1010M11Q � STJCLF-1010M11Q � TCMT 11 02 04 10 10 150 16 10 2,5 — — MS-1153 FT-7STJCRF-1212M11Q � STJCLF-1212M11Q � TCMT 11 02 04 12 12 150 16 12 — — — MS-1153 FT-7STJCRF-1616K11Q � STJCLF-1616K11Q � TCMT 11 02 04 16 16 125 16 16 — — — MS-1153 FT-7

STJCRF-1616K16Q � STJCLF-1616K16Q � TCMT 16 T3 08 16 16 125 20 16 — SKTP-343 SRS-3 MS-1156 FT-15-3.5


STJCRF-062D � STJCLF-062D � TCMT-21.51 .375 .375 6.000 .62 .375 .09 — — MS-1153 FT-7STJCRF-082D � STJCLF-082D � TCMT-21.51 .500 .500 6.000 .62 .500 — — — MS-1153 FT-7STJCRF-102B � STJCLF-102B � TCMT-21.51 .625 .625 4.500 .62 .625 — — — MS-1153 FT-7

STJCRF-103B � STJCLF-103B � TCMT-32.52 .625 .625 4.500 .75 .625 — SKTP-343 SRS-3 MS-1156 FT-15-3.5

h b l1 l2 f b3



SVAB


SVABR-1010M11Q � SVABL-1010M11Q ▫ VBMT 11 03 04 10 10 150 22 10 — — MS-1153 FT-7SVABR-1212M11Q � SVABL-1212M11Q ▫ VBMT 11 03 04 12 12 150 22 12 — — MS-1153 FT-7

SVABR-1616K16Q � SVABL-1616K16Q ▫ VBMT 16 04 08 16 16 125 30 16 — — MS-1155 FT-15


SVABR-062D � SVABL-062D � VBMT-221 .375 .375 6.000 .88 .375 — — MS-1153 FT-7SVABR-082D � SVABL-082D � VBMT-221 .500 .500 6.000 .88 .500 — — MS-1153 FT-7

SVABR-103B � SVABL-103B � VBMT-332 .625 .625 4.500 1.38 .625 — — MS-1155 FT-15

h b l1 l2 f




170


SVJB-F


SVJBRF-1010M11Q � SVJBLF-1010M11Q ▫ VBMT 11 03 04 10 10 150 23 10 — — MS-1153 FT-7SVJBRF-1212M11Q � SVJBLF-1212M11Q � VBMT 11 03 04 12 12 150 23 12 — — MS-1153 FT-7

SVJBRF-1616K16Q � SVJBLF-1616K16Q � VBMT 16 04 08 16 16 125 31 16 — — MS-1155 FT-15


SVJBRF-062D � SVJBLF-062D � VBMT-221 .375 .375 6.000 .94 .375 — — MS-1153 FT-7SVJBRF-082D � SVJBLF-082D � VBMT-221 .500 .500 6.000 .94 .500 — — MS-1153 FT-7

SVJBRF-103B � SVJBLF-103B � VBMT-332 .625 .625 4.500 1.44 .625 — — MS-1155 FT-15

h b l1 l2 f




SWLC-F


SWLCRF-1010M04Q � SWLCLF-1010M04Q � WCMT 04 02 04 10 10 150 12 10 — — MS-1153 FT-7SWLCRF-1212M04Q � SWLCLF-1212M04Q � WCMT 04 02 04 12 12 150 12 12 — — MS-1153 FT-7SWLCRF-1616K04Q � SWLCLF-1616K04Q � WCMT 04 02 04 16 16 125 12 16 — — MS-1153 FT-7

SWLCRF-1616K06Q � SWLCLF-1616K06Q � WCMT 06 T3 08 16 16 125 16 16 SKWP-343 SRS-3 MS-1156 FT-15-3.5


SWLCRF-062D � SWLCLF-062D � WCMT-21.51 .375 .375 6.000 .50 .375 — — MS-1153 FT-7SWLCRF-082D � SWLCLF-082D � WCMT-21.51 .500 .500 6.000 .50 .500 — — MS-1153 FT-7SWLCRF-102B � SWLCLF-102B � WCMT-21.51 .625 .625 4.500 .50 .625 — — MS-1153 FT-7

SWLCRF-103B � SWLCLF-103B � WCMT-32.52 .625 .625 4.500 .62 .625 SKWP-343 SRS-3 MS-1156 FT-15-3.5

h b l1 l2 f


See page 58for additional insertgeometry styles.

171

Top Notch Profiling Toolholders

NKL-F

metric toolholders for Swiss Automatic machines

NKLCRF-1212M11Q � KCUX11 03 05 12 12 150 24 12 3,8 SM-885 — MS-959 CM-68 MS-524NKLCLF-1212M11Q ▫ KCUX11 03 05 12 12 150 24 12 3,8 — SM-886 MS-959 CM-68 MS-524

NKLCRF-1616K11Q � KCUX11 03 05 16 16 125 24 16 — SM-885 — MS-959 CM-68 MS-524NKLCLF-1616K11Q ▫ KCUX11 03 05 16 16 125 24 16 — — SM-886 MS-959 CM-68 MS-524

inch toolholders for Swiss Automatic machines

NKLCRF-0805D � NPGR-51R .500 .500 6.000 .75 .500 .150 SM-285 — S-959 CM-180 S-524NKLCLF-0805D � NPGR-51L .500 .500 6.000 .75 .500 .150 — SM-286 S-959 CM-181 S-524

NKLCRF-1005B � NPGR-51R .625 .625 4.500 .75 .630 — SM-285 — S-959 CM-180 S-524NKLCLF-1005B � NPGR-51L .625 .625 4.500 .75 .630 — — SM-286 S-959 CM-181 S-524

h b l1 l2 f b3


See page 63for additional insertgeometry styles. *NKLCRF/LF-0805D and NKLCR/LF-1212M11Q only.


KM quick-change tooling is a round, centerline system designed for use in both rotating and non-rotating machining applications.Today, on average, only 20 percent of machining time is cuttingtime. The rest of the time is taken up by tool change, insertchange, and setup time. KM tooling, combined with an innovativemachine utilization strategy, can significantly reduce your down-time. The bottom line is increased machining productivity.

For more detailed information, contact Kennametal and requesteither Paper Catalog A00-028 or CD Catalog #9020CD.

Reduce Downtime with KM®

Quick-Change Tooling

Catalog 0030

Tool

ing

Syst

ems

KM™ MODULAR

QUICK-CHANGE

TOOLING SYSTEMSKM™ MODULAR

QUICK-CHANGE

TOOLING SYSTEMS

172

®Top Notch Threading, Grooving, and Backturning

NAS


NASR-1010M2Q � NG-2R 10 10 150 3,51 20 10 1,8 9 22 CM-182 — MS-1025NASL-1010M2Q � NG-2L 10 10 150 3,51 20 10 1,8 9 22 — CM-183 MS-1025

NASR-1212M2Q � NG-2R 12 12 150 3,51 20 12 — 9 — CM-182 — MS-1025NASL-1212M2Q � NG-2L 12 12 150 3,51 20 12 — 9 — — CM-183 MS-1025

NASR-1616K3Q � NG-3R*** 16 16 125 5,51 32 16 — 12 — CM-184 — MS-412NASL-1616K3Q � NG-3L*** 16 16 125 5,51 32 16 — 12 — — CM-185 MS-412


NASR-062D � NG-2R .375 .375 6.000 .138 .75 .375 .070 .35 .88 CM-182 — S-310NASL-062D � NG-2L .375 .375 6.000 .138 .75 .375 .070 .35 .88 — CM-183 S-310

NASR-082D � NG-2R .500 .500 6.000 .138 .75 .500 — .35 — CM-182 — S-310NASL-082D � NG-2L .500 .500 6.000 .138 .75 .500 — .35 — — CM-183 S-310

NASR-103B � NG-3R*** .625 .625 4.500 .210 1.25 .625 — .50 — CM-184 — S-412NASL-103B � NG-3L*** .625 .625 4.500 .210 1.25 .625 — .50 — — CM-185 S-412

h b l1 d l2 f** b3 f1 j



See pages 72-76 and104-110 for additionalinsert geometry styles. without shim

* Gage insert specified; other styles of threading and grooving inserts of the same size may be used in toolholders.** Over sharp point of grooving insert.***Backturning in #3 Top Notch only. See page 109 for NP-3002RK and NP-3012RK inserts.

*

173

LT Threading Toolholders

LSA


LSASR-1212N16 � LT-16ER 12 12 85 22 16 4 S-SA3T — — — — FT-10LSASL-1212N16 � LT-16EL 12 12 85 22 16 4 S-SA3T — — — — FT-10

LSASR-1616H16 � LT-16ER 16 16 100 25 16 — S-SA3T SM-YE3 — S-SY3T CK-C3 FT-10-15LSASL-1616H16 � LT-16EL 16 16 100 25 16 — S-SA3T — SM-YI3 S-SY3T CK-C3 FT-10-15


LSASR-83 � LT-16ER .500 .500 3.250 .87 .630 .130 S-SA3T SM-YE3 — S-SY3T — FT-10LSASL-83 � LT-16EL .500 .500 3.250 .87 .630 .130 S-SA3T — SM-YI3 S-SY3T — FT-10

LSASR-103 � LT-16ER .625 .625 5.000 1.20 .630 — S-SA3T SM-YE3 — S-SY3T CK-C3 FT-10-15LSASL-103 � LT-16EL .625 .625 5.000 1.20 .630 — S-SA3T — SM-YI3 S-SY3T CK-C3 FT-10-15

h b l1 l2 f b3




Remember, proper shim selection is important!

Always verify the supplied shim is correct for the thread to be cut.

NOTE: For complete guidelines on shim selection, see pages 692-693 in Catalog 1010.

A3SM / A3SS

metric toolholders for Swiss Automatic machines A3SMR-1616J03-10 � A3SML-1616J03-10 � 3 3,00 10 16 16 110 14,8 20 24,5 4 MS-1944 KT-25 44 5A3SMR-2020K03-10 � A3SML-2020K03-10 � 3 3,00 10 20 20 125 18,6 20 22,5 — MS-1944 KT-25 44 5A3SMR-2525M03-10 � A3SML-2525M03-10 � 3 3,00 10 25 25 150 23,8 20 29,5 — MS-1595 KT-30 150 17A3SMR-1616J03-16 � A3SML-1616J03-16 � 3 3,00 16 16 16 110 14,8 28 26,5 4 MS-1944 KT-25 44 5

A3SMR-1616J04-10 � A3SML-1616J04-10 � 4 4,00 10 16 16 110 14,3 20 24,5 4 MS-1944 KT-25 44 5A3SMR-2020K04-10 � A3SML-2020K04-10 � 4 4,00 10 20 20 125 18,3 20 24,5 — MS-1944 KT-25 44 5A3SMR-2525M04-10 � A3SML-2525M04-10 � 4 4,00 10 25 25 150 23,3 20 29,5 — MS-1595 KT-30 150 17A3SMR-1616J04-16 � A3SML-1616J04-16 � 4 4,00 16 16 16 110 14,3 29 26,5 4 MS-1944 KT-25 44 5

inch toolholders for Swiss Automatic machines A3SSR-0603-10 � A3SSL-0603-10 � 3 .087 - .125 .39 .375 .375 3.500 .340 .79 .60 .08 MS-1160 KT-20 35 4A3SSR-0803-10 � A3SSL-0803-10 � 3 .087 - .125 .39 .500 .500 3.500 .465 .79 .60 — MS-1160 KT-20 35 4A3SSR-0808-16 � A3SSL-0808-16 � 3 .087 - .125 .63 .500 .500 3.500 .465 1.10 1.04 .32 MS-1944 KT-25 35 4A3SSR-1003-16 � A3SSL-1003-16 � 3 .087 - .125 .63 .625 .625 4.500 .590 1.10 1.04 .16 MS-1944 KT-25 35 4

A3SSR-0804-10 � A3SSL-0804-10 � 4 .119 - .159 .39 .500 .500 3.500 .450 1.10 1.04 .29 MS-1944 KT-25 35 4A3SSR-1004-13 � A3SSL-1004-13 � 4 .119 - .159 .51 .625 .625 4.500 .578 1.10 1.04 .16 MS-1944 KT-25 35 4A3SSR-1004-19 � A3SSL-1004-19 � 4 .119 - .159 .75 .625 .625 4.500 .578 1.65 1.04 .16 MS-1595 KT-30 115 13

insert max clampseat h b l1 f1 l2 h2 h3 screw torquesize

(in.-lbs.) (Nm)

cutting max.width cuttingrange depth

“a” “t”




174

®A3 Deep Grooving and Profiling Toolholders

left-hand toolholder shown*f = insert cutting width�2 + f1

For inch shank toolholders, seat size 4 inserts can be used in seat size 3 and 4 toolholders, within cutting width range.

175

A3 Integral Shank Profiling Toolholders — Metric


A3DS

Round/Square Shaped Inserts

A3DSR-1616J04 � A3DSL-1616J04 � 3 + 4 3,00 - 4,05 16 16 110 22 34 22,5 MS-1944 KT-25 5A3DSR-2020K04 � A3DSL-2020K04 � 3 + 4 3,00 - 4,05 20 20 125 26 34 26,5 MS-1944 KT-25 5



right-hand toolholdershown — left-hand ismirror image

NOTE: Only V-shaped inserts can be used in 117° 30' and 93° toolholders.

h b l1 f l2 h2

insert cuttingseat widthsize a

max. clampscrew torque(Nm)

A3PS / A3US

Toolholder for V-Shape Inserts with 93° and 117° 30' Approach Angles

117° 30' approach

A3PSR-2020K04 � A3PSL-2020K04 � 117° 30' 20 20 125 25 34 26,5 MS-1595 KT-30 17A3PSR-2525M04 � A3PSL-2525M04 � 117° 30' 25 25 150 32 34 31,5 MS-1595 KT-30 17

93° approach

A3USR-2525M04 � A3USL-2525M04 � 93° 25 25 150 32 40 31,5 MS-1595 KT-30 17



93° right-hand shown —left-hand is mirror image

k° h b l1 f l2 h2

max. clampscrew torque(Nm)

176

®Shank Toolholders for A2 Cutoff Inserts

A3SC

dmax h b l1 l2 f h2 h3 r




insertseatsize

cutting width range “a”

mmin

max.cuttingdepth“t”max

max clamp screw torque

(in.-lbs.) (Nm)

metric shank toolholders for A2 cutoff inserts

A3SCR-0808X01-10 � A3SCL-0808X01-10 � 1 .063 1,6 10 20 8 8 130 20 8,1 14,5 4 11 191.916 KT-15 35 4A3SCR-1010X01-10 � A3SCL-1010X01-10 � 1 .063 1,6 10 20 10 10 130 20 10,1 14,5 2 11 MS-1160 KT-20 35 4A3SCR-1212X01-10 � A3SCL-1212X01-10 � 1 .063 1,6 10 20 12 12 130 20 12,1 14,5 — 11 MS-1160 KT-20 35 4A3SCR-1010J01-16 � A3SCL-1010J01-16 � 1 .063 1,6 16 42 10 10 110 28 10,1 26,5 10 22 MS-1488 KT-15 35 4A3SCR-1212J01-16 � A3SCL-1212J01-16 � 1 .063 1,6 16 42 12 12 110 30 12,1 26,5 8 22 MS-1944 KT-25 44 5A3SCR-1616J01-16 � A3SCL-1616J01-16 � 1 .063 1,6 16 42 16 16 110 30 16,1 26,5 4 22 MS-1944 KT-25 44 5

A3SCR-1010X02-10 � A3SCL-1010X02-10 � 2 .087 2,2 10 20 10 10 130 20 10,2 14,5 2 11 MS-1160 KT-20 35 4A3SCR-1212X02-10 � A3SCL-1212X02-10 � 2 .087 2,2 10 20 12 12 130 20 12,2 14,5 — 11 MS-1160 KT-20 35 4A3SCR-1212J02-16 � A3SCL-1212J02-16 � 2 .087 2,2 16 42 12 12 110 30 12,2 26,5 8 22 MS-1944 KT-25 44 5A3SCR-1616J02-16 � A3SCL-1616J02-16 � 2 .087 2,2 16 42 16 16 110 30 16,2 26,5 4 22 MS-1944 KT-25 44 5



inch shank toolholders for A2 cutoff inserts

A3SCR-0501-10 � A3SCL-0501-10 � 1 .063 1,6 .39 .79 5/16 5/16 6 .79 .316 .57 .16 .43 191.916 KT-15 35 4A3SCR-0601-10 � A3SCL-0601-10 � 1 .063 1,6 .39 .79 3/8 3/8 6 .79 .379 .60 .12 .43 MS-1160 KT-20 35 4A3SCR-0801-10 � A3SCL-0801-10 � 1 .063 1,6 .39 .79 1/2 1/2 6 .79 .504 .60 — .43 MS-1160 KT-20 35 4A3SCR-0601-16 � A3SCL-0601-16 � 1 .063 1,6 .63 1.65 3/8 3/8 3 1/2 1.10 .379 1.04 .41 .87 MS-1488 KT-15 35 4A3SCR-0801-16 � A3SCL-0801-16 � 1 .063 1,6 .63 1.65 1/2 1/2 3 1/2 1.18 .504 1.04 .29 .87 MS-1944 KT-25 44 5A3SCR-1001-16 � A3SCL-1001-16 � 1 .063 1,6 .63 1.65 5/8 5/8 4 1/2 1.18 .629 1.04 .16 .87 MS-1944 KT-25 44 5

A3SCR-0602-10 � A3SCL-0602-10 � 2 .087 2,2 .39 .79 3/8 3/8 6 .79 .384 .60 .12 .43 MS-1160 KT-20 35 4A3SCR-0802-10 � A3SCL-0802-10 � 2 .087 2,2 .39 .79 1/2 1/2 6 .79 .509 .60 — .43 MS-1160 KT-20 35 4A3SCR-0802-16 � A3SCL-0802-16 � 2 .087 2,2 .63 1.65 1/2 1/2 3 1/2 1.14 .509 1.04 .29 .87 MS-1944 KT-25 44 5A3SCR-1002-16 � A3SCL-1002-16 � 2 .087 2,2 .63 1.65 5/8 5/8 4 1/2 1.18 .635 1.04 .16 .87 MS-1944 KT-25 44 5

A3SCR-0603-10 � A3SCL-0603-10 � 3 .118 3,0 .39 .79 3/8 3/8 6 .79 .389 .60 .12 .43 MS-1160 KT-20 35 4A3SCR-0803-10 � A3SCL-0803-10 � 3 .118 3,0 .39 .79 1/2 1/2 6 .79 .514 .60 — .43 MS-1160 KT-20 35 4A3SCR-0803-16 � A3SCL-0803-16 � 3 .118 3,0 .63 2.05 1/2 1/2 3 1/2 1.14 .514 1.04 .29 1.06 MS-1944 KT-25 44 5A3SCR-1003-16 � A3SCL-1003-16 � 3 .118 3,0 .63 2.05 5/8 5/8 4 1/2 1.18 .639 1.04 .16 1.06 MS-1944 KT-25 44 5

A3SCR-0604-10 � A3SCL-0604-10 � 4 .157 4,0 .39 .79 3/8 3/8 6 .79 .389 .60 .12 .43 MS-1160 KT-20 35 4A3SCR-0804-10 � A3SCL-0804-10 � 4 .157 4,0 .39 .79 1/2 1/2 6 .79 .514 .60 — .43 MS-1160 KT-20 35 4A3SCR-0804-16 � A3SCL-0804-16 � 4 .157 4,0 .63 2.05 1/2 1/2 3 1/2 1.14 .514 1.04 .29 1.06 MS-1944 KT-25 44 5A3SCR-1004-16 � A3SCL-1004-16 � 4 .157 4,0 .63 2.05 5/8 5/8 4 1/2 1.18 .639 1.04 .16 1.06 MS-1944 KT-25 44 5

OD ToolingBackturning, Threading, Grooving, and Cutoff Toolholders

page

Toolholder Identification System . . . . . . . . . 178

Toolholders

Laydown Backturning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179

On-Edge Backturning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180

On-Edge Threading. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181

On-Edge Grooving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182

On-Edge Cutoff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183

177

178

®Toolholder Identification SystemIdentification System for Backturning, Cutoff, Grooving, and Threading Toolholders

08 3 D

12 12 M Q

–

1.Screw-On InsertHolding

2.Insert Shape

5.ShankDimensions

6.Shank Width(mm)

3.Tool Style

S = square backturningT = triangleV = 35° diamond grooving

G = groovingP = profiling or backturningT = threading

6.Insert Size

S

09

GT R4.Hand of Tool

N

L

R

METRIC

INCH

inch toolholders (two digits):square shanks: The numberindicates the toolholder crosssection in 1/16-inch increments.rectangular shanks: The first digitindicates the number of 1/8 inchesof width. The second digit indicatesthe number of 1/4 inches of height.

7.Tool Length

5.Shank Height(mm)

number of1/8ths of IC

B = qualified back and end, 4.5" longD = qualified back and end, 6" longZ = qualified back and end, 3.25" long

7.Qualified Surfaceand Length

Q = qualified back and endF = qualified front and endB = qualified front, back,

and end

F = 80 mmH = 100 mmK = 125 mmM = 150 mm

8.Insert Size(mm)

9.Tool Qualifications(mm)

cutting edgelength

179

Laydown Backturning Toolholders

SSP


SSPR-1010M06Q � S10P 06 03R 10 10 150 7,5 CSTB-2.5 FT-8SSPL-1010M06Q � S10P 06 03L 10 10 150 7,5 CSTB-2.5 FT-8

SSPR-1212M06Q � S10P 06 03R 12 12 150 9,5 CSTB-2.5 FT-8SSPL-1212M06Q � S10P 06 03L 12 12 150 9,5 CSTB-2.5 FT-8

SSPR-1616K06Q � S10P 06 03R 16 16 125 13,5 CSTB-2.5 FT-8SSPL-1616K06Q � S10P 06 03L 16 16 125 13,5 CSTB-2.5 FT-8


SSPR-062D � S10P-22R .375 .375 6.000 .281 CSTB-2.5 FT-8SSPL-062D � S10P-22L .375 .375 6.000 .281 CSTB-2.5 FT-8

SSPR-082D � S10P-22R .500 .500 6.000 .406 CSTB-2.5 FT-8SSPL-082D � S10P-22L .500 .500 6.000 .406 CSTB-2.5 FT-8

SSPR-102B � S10P-22R .625 .625 4.500 .531 CSTB-2.5 FT-8SSPL-102B � S10P-22L .625 .625 4.500 .531 CSTB-2.5 FT-8

insert h b l1 f


See page 128 for additional geometry styles.


180

®On-Edge Backturning Toolholders

STP


STPR-1010M16Q � T02P 16 03R 10 10 150 15 6 5 CSTB-4SD FT-8STPL-1010M16Q � T02P 16 03L 10 10 150 15 6 5 CSTB-4SD FT-8

STPR-1212M16Q � T02P 16 03R 12 12 150 15 8 3 CSTB-4SD FT-8STPL-1212M16Q � T02P 16 03L 12 12 150 15 8 3 CSTB-4SD FT-8

STPR-1616K16Q � T02P 16 03R 16 16 125 15 12 — CSTB-4SD FT-8STPL-1616K16Q � T02P 16 03L 16 16 125 15 12 — CSTB-4SD FT-8


STPR-063D � T02P-32R .375 .375 6.000 .59 .219 .20 CSTB-4SD FT-8STPL-063D � T02P-32L .375 .375 6.000 .59 .219 .20 CSTB-4SD FT-8

STPR-083D � T02P-32R .500 .500 6.000 .59 .344 .08 CSTB-4SD FT-8STPL-083D � T02P-32L .500 .500 6.000 .59 .344 .08 CSTB-4SD FT-8

STPR-103B � T02P-32R .625 .625 4.500 .59 .469 — CSTB-4SD FT-8STPL-103B � T02P-32L .625 .625 4.500 .59 .469 — CSTB-4SD FT-8

insert h b l1 l2 f h3




181

On-Edge Threading Toolholders

STT


STTR-1010M16Q � T30T 16 03R 10 10 150 16,5 9,5 2,0 CSTB-4SD FT-8STTL-1010M16Q ▫ T30T 16 03L 10 10 150 16,5 9,5 2,0 CSTB-4SD FT-8

STTR-1212M16Q � T30T 16 03R 12 12 150 16,5 11,5 — CSTB-4SD FT-8STTL-1212M16Q ▫ T30T 16 03L 12 12 150 16,5 11,5 — CSTB-4SD FT-8

STTR-1616K16Q � T30T 16 03R 16 16 125 16,5 15,5 — CSTB-4SD FT-8STTL-1616K16Q ▫ T30T 16 03L 16 16 125 16,5 15,5 — CSTB-4SD FT-8


STTR-063D � T30T-32R .375 .375 6.000 .65 .355 .08 CSTB-4SD FT-8STTL-063D ▫ T30T-32L .375 .375 6.000 .65 .355 .08 CSTB-4SD FT-8

STTR-083D � T30T-32R .500 .500 6.000 .65 .480 — CSTB-4SD FT-8STTL-083D ▫ T30T-32L .500 .500 6.000 .65 .480 — CSTB-4SD FT-8

STTR-103B � T30T-32R .625 .625 4.500 .65 .605 — CSTB-4SD FT-8STTL-103B ▫ T30T-32L .625 .625 4.500 .65 .605 — CSTB-4SD FT-8





182

®On-Edge Grooving Toolholders

STG



STGR-1010M16Q � T20G 16 03R 10 10 150 18,5 10 2,0 CSTB-4SD FT-8STGL-1010M16Q � T20G 16 03L 10 10 150 18,5 10 2,0 CSTB-4SD FT-8

STGR-1212M16Q � T20G 16 03R 12 12 150 18,5 12 — CSTB-4SD FT-8STGL-1212M16Q � T20G 16 03L 12 12 150 18,5 12 — CSTB-4SD FT-8

STGR-1616K16Q � T20G 16 03R 16 16 125 18,5 16 — CSTB-4SD FT-8STGL-1616K16Q � T20G 16 03L 16 16 125 18,5 16 — CSTB-4SD FT-8


STGR-063D � T20G-32R .375 .375 6.000 .73 .375 .08 CSTB-4SD FT-8STGL-063D � T20G-32L .375 .375 6.000 .73 .375 .08 CSTB-4SD FT-8

STGR-083D � T20G-32R .500 .500 6.000 .73 .500 — CSTB-4SD FT-8STGL-083D � T20G-32L .500 .500 6.000 .73 .500 — CSTB-4SD FT-8

STGR-103B � T20G-32R .625 .625 4.500 .73 .625 — CSTB-4SD FT-8STGL-103B � T20G-32L .625 .625 4.500 .73 .625 — CSTB-4SD FT-8




183

On-Edge Cutoff Toolholders

insert h b l1 l2 f

SVG

metric toolholders for Swiss Automatic machines SVGR-1010M13Q � V10G 13 03R 10 10 150 23 10 CSTB-3S FT-9

SVGL-1010M13Q � V10G 13 03L 10 10 150 23 10 CSTB-3S FT-9

SVGR-1212M13Q � V10G 13 03R 12 12 150 23 12 CSTB-3S FT-9SVGL-1212M13Q � V10G 13 03L 12 12 150 23 12 CSTB-3S FT-9

SVGR-1616K13Q � V10G 13 03R 16 16 125 23 16 CSTB-3S FT-9SVGL-1616K13Q � V10G 13 03L 16 16 125 23 16 CSTB-3S FT-9

inch toolholders for Swiss Automatic machines SVGR-062.5D � V10G-2.52R .375 .375 6.000 .91 .375 CSTB-3S FT-9

SVGL-062.5D � V10G-2.52L .375 .375 6.000 .91 .375 CSTB-3S FT-9

SVGR-082.5D � V10G-2.52R .500 .500 6.000 .91 .500 CSTB-3S FT-9SVGL-082.5D � V10G-2.52L .500 .500 6.000 .91 .500 CSTB-3S FT-9

SVGR-102.5B � V10G-2.52R .625 .625 4.500 .91 .625 CSTB-3S FT-9SVGL-102.5B � V10G-2.52L .625 .625 4.500 .91 .625 CSTB-3S FT-9




184

AN ALL NEW KENNAMETAL.COM!

Here are Some Features of the ALL NEW Kennametal.com:

Introducing...

Visit http://www.kennametal.com today to register to take advantage of our NEW

on-line features!

On-line Buying

Direct web-order entry with price

and inventory information!

Contract Ordering

Direct web-order entry against

customer contracts with

tracking of product usage!

Check Order Status

Access to status of orders

placed including shipping

carrier information!

Check Account Status

Access to status of invoice and payment information!

Check Price and Availability

Access to price and inventory information on Kennametal standard products!

Favorites List

Ability to store a list of routinely purchased products from which you

can place orders quickly and easily!

page

Boring Bars

185

Kendex Mini . . . . . . . . . . . . . . . . . . . . . . 186

Top Notch Threading and Grooving. . . . . . . 189

LT Threading . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194

Micro Boring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199

®Kendex Mini Boring BarsSteel Shank without Through-Coolant

186

metric

S06D-CBFPR 03 � BPGF0302..L.. 3,5 6 60 3,25 16 6 E-1031 FT-6S06D-CBFPL 03 � BPGF0302..R.. 3,5 6 60 3,25 16 6 E-1031 FT-6

S06D-CBFPR 05 � BPGF0503..L.. 5,0 6 60 4,5 16 8 E-1014 FT-6S06D-CBFPL 05 � BPGF0503..R.. 5,0 6 60 4,5 16 8 E-1014 FT-6

S08F-CBFPR 05 � BPGF0503..L.. 5,0 8 80 5,5 20 10 E-1014 FT-8S08F-CBFPL 05 � BPGF0503..R.. 5,0 8 80 5,5 20 10 E-1014 FT-8

S10H-CBFPR 05 � BPGF0503..L.. 5,0 10 100 6,5 24 12 E-1014 FT-8S10H-CBFPL 05 ▫ BPGF0503..R.. 5,0 10 100 6,5 24 12 E-1014 FT-8

inch

S04-KBFPR03 � — BPGF 03 02 02L .14 .250 2.375 .128 1.75 .250 CE-1031 FT-6

S04-KBFPR05 � — BPGF 05 03 02L .20 .250 2.375 .177 1.75 .315 CE-1014 FT-8S05-KBFPR05 � — BPGF 05 03 02L .20 .312 3.125 .216 2.38 .394 CE-1014 FT-8

l* dg7 l1 f l2 min. bore


metric

S06D-CBLPR 03 � BPGF0302..L.. 3,5 6 60 3,25 16 6 E-1031 FT-6S06D-CBLPL 03 � BPGF0302..R.. 3,5 6 60 3,25 16 6 E-1031 FT-6

S06D-CBLPR 05 � BPGF0503..L.. 5,0 6 60 4,5 16 8 E-1014 FT-8S06D-CBLPL 05 � BPGF0503..R.. 5,0 6 60 4,5 16 8 E-1014 FT-8

S08F-CBLPR 05 � BPGF0503..L.. 5,0 8 80 5,5 20 10 E-1014 FT-8S08F-CBLPL 05 � BPGF0503..R.. 5,0 8 80 5,5 20 10 E-1014 FT-8

S10H-CBLPR 05 � BPGF0503..L.. 5,0 10 100 6,5 24 12 E-1014 FT-8S10H-CBLPL 05 � BPGF0503..R.. 5,0 10 100 6,5 24 12 E-1014 FT-8

inch

S04-KBLPR03 � BPGF 03 02 02L .14 .250 2.375 .128 1.75 .250 CE-1031 FT-6S04-KBLPL03 � BPGF 03 02 02R .14 .250 2.375 .128 1.75 .250 CE-1031 FT-6




See page 64 for additional insert geometry styles.

*Refer to insert page 64.NOTE: Right-hand bars use left-hand inserts. Left-hand bars use right-hand inserts.



�– stocked▫ – limited stock

l* dg7 l1 f l2 min. bore

S-CBLS-KBL

S-CBFS-KBF

Carbide Shank with Through-Coolant

Kendex Mini Boring Bars

187

E-CBFC-KBF

metric

E06H-CBFPR 03 � BPGF0302.. L.. 3,5 6 100 3,25 16 6 1 E-1031 FT-6E06H-CBFPL 03 � BPGF0302.. R.. 3,5 6 100 3,25 16 6 1 E-1031 FT-6

E06H-CBFPR 05 � BPGF0503.. L.. 5,0 6 100 4,5 16 8 1 E-1014 FT-8E06H-CBFPL 05 � BPGF0503.. R.. 5,0 6 100 4,5 16 8 1 E-1014 FT-8

E08K-CBFPR 05 � BPGF0503.. L.. 5,0 8 125 5,5 20 10 2 E-1014 FT-8E08K-CBFPL 05 ▫ BPGF0503.. R.. 5,0 8 125 5,5 20 10 2 E-1014 FT-8

E10M-CBFPR 05 � BPGF0503.. L.. 5,0 10 150 6,5 24 12 2 E-1014 FT-8E10M-CBFPL 05 ▫ BPGF0503.. R.. 5,0 10 150 6,5 24 12 2 E-1014 FT-8

inch

C04-KBFPR03 � — BPGF 03 02 02 L .14 .250 3.938 .128 2.75 .250 .06 CE-1031 FT-6

C04-KBFPR05 � — BPGF 05 03 02 L .20 .250 3.938 .177 3.31 .315 .06 CE-1014 FT-6C05-KBFPR05 � — BPGF 05 03 02 L .20 .312 4.922 .216 4.12 .394 .08 CE-1014 FT-8

l* dg7 l1 f l2 min. bore a





®Kendex Mini Boring BarsCarbide Shank with Through-Coolant

188

l* dg7 l1 f l2 min. bore a



metric

E06H-CBLPR 03 � BPGF0302..L.. 3,5 6 100 3,25 16 6 1 E-1031 FT-6E06H-CBLPL 03 � BPGF0302..R.. 3,5 6 100 3,25 16 6 1 E-1031 FT-6

E06H-CBLPR 05 � BPGF0503..L.. 5,0 6 100 4,5 16 8 1 E-1014 FT-8E06H-CBLPL 05 � BPGF0503..R.. 5,0 6 100 4,5 16 8 1 E-1014 FT-8

E08K-CBLPR 05 � BPGF0503..L.. 5,0 8 125 5,5 20 10 2 E-1014 FT-8E08K-CBLPL 05 � BPGF0503..R.. 5,0 8 125 5,5 20 10 2 E-1014 FT-8

E10M-CBLPR 05 � BPGF0503..L.. 5,0 10 150 6,5 24 12 2 E-1014 FT-8E10M-CBLPL 05 � BPGF0503..R.. 5,0 10 150 6,5 24 12 2 E-1014 FT-8

inch

C04-KBLPR03 � BPGF 03 02 02 L .14 .250 3.938 .128 2.75 .250 .06 CE-1031 FT-6C04-KBLPL03 � BPGF 03 02 02 R .14 .250 3.938 .128 2.75 .250 .06 CE-1031 FT-6



E-CBLC-KBL



189

Identification System (Metric)

Top Notch Threading and Grooving Boring Bars

A 12 R N N T 0 R 2

1.Bar Style

integers to be preceded by a 0.example: “d” = 8 mm indicated by code 08

2.Bar Diameter

7.InsertPosition

0°

6.Bar StyleT

K 125

M 150

Q 180

R 200

S 250

T 300

U 350

3.ToolLength

9.Insert Size

insertnumber

s

1 2.542 3.813 4.954 6.48

8.Hand of Bar

left hand

right hand

steelwith coolant

carbidewith coolant

heavy metalwith coolant

NOTE: Right-hand bars use left-hand inserts and clamps.Left-hand bars use right-hand inserts and clamps.

5.InsertShapeN

4.InsertHoldingMethodN — Top Notch

190

®Top Notch Threading and Grooving Boring BarsIdentification System (Inch)

S 32 – N E R 3 W

1.Bar Style

a two-digit number whichindicates the bar diameterin 1/16-inch increments

2.Bar Diameter

7.AdditionalInformation

through-coolantinterchangeable head

4.Insert Locationend mount

N* — Top Notch

3.Insert HoldingMethod

6.Insert Size

insertnumber

s

1 .1002 .1503 .1954 .2555 .3806 .3838 .438

5.Hand of Bar

left hand

right hand

steel steelwith coolant

carbide carbidewith coolant

interchangeable head

heavy metalwith coolant

undercut

*Kennametal standard only.NOTE: Right-hand bars use left-hand inserts and clamps.

Left-hand bars use right-hand inserts and clamps.

A..NNTSteel Shank with Through-Coolant (Metric)


191

E..NNT

E16RNNTOR2 � NG-2L 16 200 11 22,0 .19 — CM75 MS1025E16RNNTOL2 � NG-2R 16 200 11 22,0 .19 CM74 — MS1025

dg7 l f min. bore a


See pages 72-76 and 104-110 for additional insert geometry styles.

*Right-hand bars use left-hand inserts. Left-hand bars use right-hand inserts.**Minimum bore capability varies with depth of groove. See page 702 for details on grooving and page 686 for details on threading in Catalog 1010.NOTE: Refer to Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.


A10KNNTOR1 � — NG-1L 10 125 7 11,5 1/16-27 NPT CM109 — MS1034A12MNNTOR1 � — NG-1L 12 150 7 11,5 1/16-27 NPT CM109 — MS1034

A12MNNTOR2 � NG-2L 12 150 11 18,5 1/16-27 NPT — CM147 MS1025A12MNNTOL2 � NG-2R 12 150 11 18,5 1/16-27 NPT CM146 — MS1025

A16MNNTOR2 � NG-2L 16 150 11 22,0 1/16-27 NPT — CM75 MS1025A16MNNTOL2 � NG-2R 16 150 11 22,0 1/16-27 NPT CM74 — MS1025

dg7 l f min. bore a



Carbide Shank with Through-Coolant (Metric)


*

*

A-NE

®Top Notch Threading and Grooving Boring BarsSteel Shank with Through-Coolant (Inch)

192

E-NE

E08-NER2 � NG-2L .500 8 .437 .730 .19 — CM-147 S-39E08-NEL2 � NG-2R .500 8 .437 .730 .19 CM-146 — S-39

E10-NER2 � NG-2L .625 10 .500 1.000 .22 — CM-75 S-310E10-NEL2 � NG-2R .625 10 .500 1.000 .22 CM-74 — S-310

dg7 l f min. bore a





*Right-hand bars use left-hand inserts. Left-hand bars use right-hand inserts.**Minimum bore capability varies with depth of groove. See page 702 for details on grooving and page 686 for details on threading in Catalog 1010.

A08-NER2 � NG-2L .500 8 .437 .730 1/16-27 NPT — CM-147 S-39A08-NEL2 � NG-2R .500 8 .437 .730 1/16-27 NPT CM-146 — S-39

A10-NER2 � NG-2L .625 10 .500 1.000 1/8-27 NPT — CM-75 S-310A10-NEL2 � NG-2R .625 10 .500 1.000 1/8-27 NPT CM-74 — S-310

dg7 l f min. bore a



NOTE: Refer to Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.

Carbide Shank with Through-Coolant (Inch)

*

*

J-NE-SHeavy Metal with Through-Coolant (Inch)


193

J05-NER1-S � — NG-1L .312 6 .258 .440 .09 CM-109 S-304

J06-NER1-S � — NG-1L .375 6 .265 .480 .12 CM-109 S-304

J08-NER1-S � — NG-1L .500 8 .325 .600 .160 CM-109 S-304

dg7 l f min. bore a†


J-NE

J08-NER2 � NG-2L .500 8 .437 .730 .16 — CM-147 S-39J08-NEL2 � NG-2R .500 8 .437 .730 .16 CM-146 — S-39

J10-NER2 � NG-2L .625 8 .500 1.000 .16 — CM-75 S-310J10-NEL2 � NG-2R .625 8 .500 1.000 .16 CM-74 — S-310

dg7 l f min. bore a†



*Right-hand bars use left-hand inserts. Left-hand bars use right-hand inserts.**Minimum bore capability varies with depth of groove. See page 702 for details on grooving and page 686 for details on threading in Catalog 1010.†Through hole only, no threads.


*Right-hand bars use left-hand inserts. Left-hand bars use right-hand inserts.**Minimum bore capability varies with depth of groove. See page 702 for details on grooving and page 686 for details on threading in Catalog 1010.†Through hole only, no threads.



*

*

194

®LT Laydown Threading BarsLT Boring Bar and Head Identification System (Inch)

*NOTE: Toolholders with shank sizes larger than 5/8-inch (16 mm) are supplied with clamp and insert screw.Secure the insert with either the clamp or insert screw. Do not use both.

5.Shim Angle

2P — 2° positive

1P — 1° positive__ 0° neutral

1N — 1° negative

2N — 2° negative

3N — 3° negative

3. E — external

I — internal

S 08 12 – L S E R 2

SM – Y E 3 – 2P

1.Bar TypeA steel with coolant

a two-digit number whichindicates the necked-shank diameter in 1/16-inch increments

2.Necked-Shank Bar Diameter

3.Bar Diameter

a two-digit number which indicates the bar diameter in 1/16-inch increments

4.Insert StyleL — laydown triangle

insert screwor

clamp

*5.Insert HoldingMethod

6.Bar Style

end cutting edge mount

8.Insert Size

insertnumber

d (inch)

l (mm)

Size equals number of 1/8-inchincrements of d.

2 1/4 113 3/8 164 1/2 22

7.Hand of Bar

left hand right hand

S steel

E carbide with coolant

H interchangeable headwith coolant

LT Threading – Shim Identification System

1.Shim

2.Y — shim for

LT standard inserts

4.IC — 1/8ths inch

195

LT Boring Bar and Head Identification System (Metric)

LT Laydown Threading Bars

*NOTE: Toolholders with shank sizes larger than 5/8-inch (16 mm) are supplied with clamp and insert screw.Secure the insert with either the clamp or insert screw. Do not use both.

A 10 20 – L S E R 112.Necked-ShankBar Diameter

3.Bar Diameter

4.Insert StyleL — laydown triangle

insert screwor

clamp

*5.Insert HoldingMethod

6.Bar Style

8.Insert Size

l d (IC)

11 6.3516 9.5222 12.70

7.Hand of Bar

left hand right hand

E carbide shank with internalcoolant supply

H replaceable boring head

1.Bar TypeA steel shank with internal

coolant supply

end cutting edge mount

a two-digit number whichindicates the bar diameter in mm increments

®Laydown Threading BarsLT Shims for Toolholders and Boring Bars

196

shim ordering code

NOTE: For complete guidelines on shim selection, see pages 692-693 of Lathe Catalog 1010.

Steel Shank with Through-Coolant (Metric)A-LSE

See pages 84-96 for additional insert geometry styles.

LT-16 (3/8") RH LH SM-YE3-3P SM-YE3-2P SM-YE3-1P SM-YE3 SM-YE3-1N SM-YE3-1.5N SM-YE3-2N SM-YE3-3NLH RH SM-YI3-3P SM-YI3-2P SM-YI3-1P SM-YI3 SM-YI3-1N SM-YI3-1.5N SM-YI3-2N SM-YI3-3N

LT-22 (1/2") RH LH SM-YE4-3P SM-YE4-2P SM-YE4-1P SM-YE4 SM-YE4-1N SM-YE4-1.5N SM-YE4-2N SM-YE4-3NLH RH SM-YI4-3P SM-YI4-2P SM-YI4-1P SM-YI4 SM-YI4-1N SM-YI4-1.5N SM-YI4-2N SM-YI4-3N

insertsize

toolholder

ext. int.

reverse helix - feed away from chuckfeed directionshim angle 4.5 3.5 2.5 1.5 0.5 0 -0.5 -1.5

standard helix - feed towards chuck

Remember, proper shim selection is important!

Always verify the supplied shim is correct for the thread to be cut.

Slanted Shim Kit

Since you might occasionally need different shims other than thosesupplied with our standard toolholders, we strongly recommend thatshim kits be readily available in every tool shop.

shim size (IC) ordering code contains slanted shims

3/8" ABY3SM-YE3-2P,1P,1N,2N,3NSM-YI3-2P,1P,1N,2N,3N

1/2" ABY4SM-YE4-2P,1P,1N,2N,3NSM-YI4-2P,1P,1N,2N,3N



A1010LSER11 � — LT-11NR 10 100 7,3 100 10,0 13 4,5 S-SN2T — — — — FT-6— A1010LSEL11 � LT-11NL 10 100 7,3 100 10,0 13 4,5 S-SN2T — — — — FT-6

A1020LSER11 � — LT-11NR 20 180 7,3 25 10,0 13 4,5 S-SN2T — — — — FT-6— A1020LSEL11 � LT-11NL 20 180 7,3 25 10,0 13 4,5 S-SN2T — — — — FT-6

A1320LSER11 � — LT-11NR 20 180 8,9 32 13,0 16 4,5 S-SN2T — — — — FT-6— A1320LSEL11 ▫ LT-11NL 20 180 8,9 32 13,0 16 4,5 S-SN2T — — — — FT-6

A1320LSER16 � — LT-16NR 20 180 10,3 32 13,0 20 4,5 S-SA3T — — — — FT-10— A1320LSEL16 � LT-16NL 20 180 10,3 32 13,0 20 4,5 S-SA3T — — — — FT-10



A2020LSER16 � — LT-16NR 20 180 13,4 40 20,0 24 4,5 S-SA3T SMYI3 — SSY3T CKC3 FT-10-15— A2020LSEL16 � LT-16NL 20 180 13,4 40 20,0 24 4,5 S-SA3T — SMYE3 SSY3T CKC3 FT-10-15

dg7 l1 f l3 d1min. abore


S-LSESteel Shank without Through-Coolant (Inch)

Laydown Threading Bars

197

Carbide Shank with Through-CoolantE-LSE

metric

E16R-LSER16 � — LT-16NR 16 — 11,5 200 2,5 S-SA3T — — — — FT-10— E16R-LSEL16 ▫ LT-16NL 16 — 11,5 200 2,5 S-SA3T — — — — FT-10

inch

E06-LSER2 � — LT-11NR 3/8 6 .280 .500 1/8 S-SN2T — — — — FT-8— E06-LSEL2 � LT-11NL 3/8 6 .280 .500 1/8 S-SN2T — — — — FT-8

E08-LSER2 � — LT-11NR 1/2 8 .340 .650 3/16 S-SN2T — — — — FT-8— E08-LSEL2 � LT-11NL 1/2 8 .340 .650 3/16 S-SN2T — — — — FT-8

E10-LSER3 � — LT-16NR 5/8 10 .460 .800 7/32 S-SA3T — — — — FT-10— E10-LSEL3 � LT-16NL 5/8 10 .460 .800 7/32 S-SA3T — — — — FT-10

dg7 l f min. abore




S0612-LSER2 � — LT-11NR 3/4 7 .28 1 3/8 .50 S-SN2T — — — — FT-8— S0612-LSEL2 � LT-11NL 3/4 7 .28 1 3/8 .50 S-SN2T — — — — FT-8

S0812-LSER2 � — LT-11NR 3/4 7 .34 1 1/4 1/2 .65 S-SN2T — — — — FT-8— S0812-LSEL2 � LT-11NL 3/4 7 .34 1 1/4 1/2 .65 S-SN2T — — — — FT-8

S1012-LSER3 � — LT-16NR 3/4 7 .46 1 1/2 5/8 .80 S-SA3T — — — — FT-10— S1012-LSEL3 � LT-16NL 3/4 7 .46 1 1/2 5/8 .80 S-SA3T — — — — FT-10

S1212-LSER3 � — LT-16NR 3/4 7 .51 — — .90 S-SA3T SM-YI3 S-SY3T CK-C3 FT-10-15— S1212-LSEL3 � LT-16NL 3/4 7 .51 — — .90 S-SA3T — SM-YE3 S-SY3T CK-C3 FT-10-15






dg7 l1 f l3 d1min.bore

Kennametal MicroBoring Bars

198

199

Boring Bars (Inch)

Steel Shank BarsA-Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200B-Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20080° Diamond Screw-On Inserts . . . . . . . . . . . . . . 201-20245° Diamond Screw-On Inserts . . . . . . . . . . . . . . . 203Triangle Screw-On Inserts. . . . . . . . . . . . . . . . . . . . 204-205Offset Shank Bars with Triangle Screw-On Inserts 206Trigon Screw-On Inserts . . . . . . . . . . . . . . . . . . . . . . 207Threading and Grooving Screw-On Inserts . . . . . . . . 207

Coolant Capable Steel Shank BarsTriangle Screw-On Inserts . . . . . . . . . . . . . . . . . . . . . . . 208

Carbide Shank Bars80° Diamond Screw-On Inserts. . . . . . . . . . . . . . . . . . . . . 209-21045° Diamond Screw-On Inserts . . . . . . . . . . . . . . . . . . . . . 211Triangle Screw-On Inserts . . . . . . . . . . . . . . . . . . . . . . . . . 212-213Trigon Screw-On Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . 214Threading and Grooving Screw-On Inserts . . . . . . . . . . . . 214

Coolant Capable Carbide Shank Bars80° Diamond Screw-On Inserts . . . . . . . . . . . . . . . . . . . . . . 215Triangle Screw-On Inserts. . . . . . . . . . . . . . . . . . . . . . . . . . . 216

Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217

Micro Boring Bars

page

200

®Inch Boring Bars with Coolant Capable Steel ShankA-SeriesATBI

ATBI-375-1.5 � See .375 .760 1.500 AW-250 AS-8-32 BW-078ATBI-500-1.5 ▫ insert .500 .760 1.500 see see AW-250 AS-8-32 BW-078ATBI-500-4 � section, .500 .760 4.000 insert insert AW-250 AS-8-32 BW-078ATBI-625-4 � pages .625 .760 4.000 section section AW-250 AS-8-32 BW-078ATBI-750-4 � 132-133. .750 .760 4.000 AW-250 AS-8-32 BW-078

Dmin d1 d2 l1 l2 fcatalog number


Inch Boring Bars with Steel ShankB-SeriesBSBI

BSBI-750-6 � .750 1.010 6.000 see insert see insert BW-312 BS-8-32 BW-078BSBI-1000-6 � 1.000 1.010 6.000 section section BW-312 BS-8-32 BW-078

Dmin d1 d2 l1 l2 fcatalog number

See insertsection,

page 133.

catalog number


201

Necked Shank Bars — 80° Diamond Screw-On Inserts

Straight Shank Bars

Inch Boring Bars with Steel Shank

S-SCF – 90° Lead

S3.206X-SCFDR1.2-0.5 � S3.206X-SCFDL1.2-0.5 � CDHB 1.20.60.5 .239 .375 .203 2.500 .500 .122 CC-11 FT-6S3.206X-SCFDR1.2-1 � S3.206X-SCFDL1.2-1 � CDHB 1.20.60.5 .239 .375 .203 2.500 1.000 .122 CC-11 FT-6

S0406X-SCFDR1.2-0.75 � S0406X-SCFDL1.2-0.75 � CDHB 1.20.60.5 .292 .375 .260 2.500 .750 .152 CC-11 FT-6S0406X-SCFDR1.2-1.25 � S0406X-SCFDL1.21.25 � CDHB 1.20.60.5 .292 .375 .260 2.500 1.250 .152 CC-11 FT-6

S3.208X-SCFDR1.2-0.5 � S3.208X-SCFDL1.2-0.5 � CDHB 1.20.60.5 .239 .500 .203 2.750 .500 .122 CC-11 FT-6S3.208X-SCFDR1.2-1 � S3.208X-SCFDL1.2-1 � CDHB 1.20.60.5 .239 .500 .203 2.750 1.000 .122 CC-11 FT-6

S0408X-SCFDR1.2-0.75 � S0408X-SCFDL1.2-0.75 � CDHB 1.20.60.5 .292 .500 .260 2.750 .750 .152 CC-11 FT-6S0408X-SCFDR1.2-1.25 � S0408X-SCFDL1.2-1.25 � CDHB 1.20.60.5 .292 .500 .260 2.750 1.250 .152 CC-11 FT-6

See page 134 for additional insertgeometry styles.

Dmin d1 d2 l1 l2 f

catalog number


S03X-SCFDR1.2 � — CDHB 1.20.60.5 .244 .187 .203 2.500 .122 CC-09 FT-6

S04F-SCFDR1.2 � — CDHB 1.20.60.5 .292 .250 .260 3.000 .152 CC-11 FT-6


Dmin dg7 d2 l1 f


202

®

Necked Shank Bars — 80° Diamond Screw-On Inserts


catalog number


S-SCL – 95° Lead

S2.906X-SCLDR1.2-0.5 � S2.906X-SCLDL1.2-0.5 � CDHB 1.20.60.5 .208 .375 .180 2.500 .500 .104 CC-09 FT-6S2.906X-SCLDR1.2-1 � S2.906X-SCLDL1.2-1 � CDHB 1.20.60.5 .208 .375 .180 2.500 1.000 .104 CC-09 FT-6


S0406X-SCLDR1.2-0.75 � S0406X-SCLDL1.2-0.75 � CDHB 1.20.60.5 .285 .375 .260 2.500 .750 .145 CC-11 FT-6S0406X-SCLDR1.2-1.25 � S0406X-SCLDL1.2-1.25 � CDHB 1.20.60.5 .285 .375 .260 2.500 1.250 .145 CC-11 FT-6



S0408X-SCLDR1.2-0.75 � S0408X-SCLDL1.2-0.75 � CDHB 1.20.60.5 .285 .500 .260 2.750 .750 .145 CC-11 FT-6S0408X-SCLDR1.2-1.25 � S0408X-SCLDL1.2-1.25 � CDHB 1.20.60.5 .285 .500 .260 2.750 1.250 .145 CC-11 FT-6


Dmin d1 d2 l1 l2 f

Straight Shank Bars

catalog number


S03X-SC7DR1.2* � S03X-SC7DL1.2* � CDHB 1.20.60.5 .180 .187 .165 2.500 .094 CC-09 FT-6S03X-SCLDR1.2A � S03X-SCLDL1.2A ▫ CDHB 1.20.60.5 .208 .187 .180 2.500 .104 CC-09 FT-6S03X-SCLDR1.2 � S03X-SCLDL1.2 � CDHB 1.20.60.5 .230 .187 .203 2.500 .116 CC-09 FT-6

S04F-SCLDR1.2 � S04F-SCLDL1.2 � CDHB 1.20.60.5 .285 .250 .260 3.000 .145 CC-11 FT-6


Dmin d1 d2 l1 f


*97° on these bars

*

203

45° Diamond Screw-On Inserts

Inch Profiling Boring Bars with Steel Shank

catalog number


S-SGR – 95° Lead

S0408H-SGRPR5-1 � S0408H-SGRPL5-1 � GPCD-50.5 .400 .500 .260 4.000 1.000 .260 CT-15 FT-6

S0508H-SGRPR5-1.25 � S0508H-SGRPL5-1.25 � GPCD-50.5 .463 .500 .323 4.000 1.250 .291 CT-15 FT-6


Dmin d1 d2 l1 l2 f

catalog number


S-SG – 67° 30' Lead

S0408H-SG22.5PR5-1 � S0408H-SG22.5PL5-1 � GPCD-50.5 .400 .500 .260 4.000 1.000 .260 CT-15 FT-6

S0508H-SG22.5PR5-1.25 � S0508H-SG22.5PL5-1.25 � GPCD-50.5 .463 .500 .323 4.000 1.250 .291 CT-15 FT-6


Dmin d1 d2 l1 l2 f


204

®Inch Boring Bars with Steel ShankNecked Shank Bars — Triangle Screw-On Inserts

Straight Shank Bars

catalog number


S-STF – 90° Lead

S3.208F-STFDR1.28-0.5 � S3.208F-STFDL1.28-0.5 � TDHB 1.280.750.5 .275 .500 .203 3.000 .500 .134 FC-11 FT-7S3.208F-STFDR1.28-1 � S3.208F-STFDL1.28-1 � TDHB 1.280.750.5 .275 .500 .203 3.000 1.000 .134 FC-11 FT-7S0408F-STFDR1.28-0.75 � S0408F-STFDL1.28-0.75 � TDHB 1.280.750.5 .300 .500 .259 3.000 .750 .156 FC-14 FT-7S0408F-STFDR1.28-1.25 � S0408F-STFDL1.28-1.25 � TDHB 1.280.750.5 .300 .500 .259 3.000 1.250 .156 FC-14 FT-7S0508F-STFDR1.28-1 � S0508F-STFDL1.28-1 � TDHB 1.280.750.5 .360 .500 .321 3.000 1.000 .187 FC-14 FT-7S0508F-STFDR1.28-1.5 � S0508F-STFDL1.28-1.5 � TDHB 1.280.750.5 .360 .500 .321 3.000 1.500 .187 FC-14 FT-7S3.210H-STFDR1.28-0.5 � S3.210H-STFDL1.28-0.5 � TDHB 1.280.750.5 .275 .625 .203 4.000 .500 .134 FC-11 FT-7S3.210H-STFDR1.28-1 � S3.210H-STFDL1.28-1 � TDHB 1.280.750.5 .275 .625 .203 4.000 1.000 .134 FC-11 FT-7S0410H-STFDR1.28-0.75 � S0410H-STFDL1.28-0.75 � TDHB 1.280.750.5 .300 .625 .259 4.000 .750 .156 FC-14 FT-7S0410H-STFDR1.28-1.25 � S0410H-STFDL1.28-1.25 � TDHB 1.280.750.5 .300 .625 .259 4.000 1.250 .156 FC-14 FT-7S0510H-STFDR1.28-1 � S0510H-STFDL1.28-1 � TDHB 1.280.750.5 .360 .625 .321 4.000 1.000 .187 FC-14 FT-7S0510H-STFDR1.28-1.5 � S0510H-STFDR1.28-1.5 � TDHB 1.280.750.5 .360 .625 .321 4.000 1.500 .187 FC-14 FT-7S0608X-STFDR2-1.12 � S0608X-STFDL2-1.12 � TPCB-220.5 .438 .500 .390 3.750 1.125 .221 QC-21 FT-9S0608X-STFDR2-1.88 � S0608X-STFDL2-1.88 � TPCB-220.5 .438 .500 .390 3.750 1.875 .221 QC-21 FT-9S0610X-STFDR2-1.12 � S0610X-STFDL2-1.12 � TPCB-220.5 .438 .625 .390 4.250 1.125 .221 QC-21 FT-9S0610X-STFDR2-1.88 � S0610X-STFDL2-1.88 � TPCB-220.5 .438 .625 .390 4.250 1.875 .221 QC-21 FT-9S0810X-STFDR2-1.5 � S0810X-STFDL2-1.5 � TPCB-220.5 .563 .625 .510 4.250 1.500 .296 QC-26 FT-9S0810X-STFDR2-2.5 � S0810X-STFDL2-2.5 � TPCB-220.5 .563 .625 .510 4.250 2.500 .296 QC-26 FT-9S0612H-STFDR2-1.5 � S0612H-STFDL2-1.5 � TPCB-220.5 .438 .750 .390 4.000 1.500 .221 QC-21 FT-9S1012J-STFDR2-2.5 � S1012J-STFDL2-2.5 � TPCB-220.5 .688 .750 .625 4.500 2.500 .353 QC-26 FT-9


Dmin d1 d2 l1 l2 f

catalog number


S03G-STFDR1.28 ▫ S03G-STFDL1.28 ▫ TDHB 1.280.750.5 .275 .187 .197 3.500 .123 FC-11 FT-7S04H-STFDR1.28 � S04H-STFDL1.28 ▫ TDHB 1.280.750.5 .300 .250 .260 4.000 .156 FC-14 FT-7S05H-STFDR1.28 � S05H-STFDL1.28 � TDHB 1.280.750.5 .360 .312 .322 4.000 .187 FC-14 FT-7

S06K-STFDR2 � S06K-STFDL2 � TPCB-220.5 .438 .375 .385 5.000 .221 QC-21 FT-9S08M-STFDR2 � S08M-STFDL2 � TPCB-220.5 .563 .500 .510 6.000 .296 QC-26 FT-9

S10Q-STFDR6P � S10Q-STFDL6P � TD-6P0.5 .731 .625 .635 7.000 .393 SC-30 FT-9S12R-STFDR6P � S12R-STFDL6P � TD-6P0.5 .855 .750 .760 8.000 .460 SC-30 FT-9


Dmin d1 d2 l1 f


205

Inch Boring Bars with Steel ShankNecked Shank Bars — Triangle Screw-On Inserts

Straight Shank Bars

catalog number


S-STL – 95° Lead

S3.208F-STLDR1.28-0.5 � S3.208F-STLDL1.28-0.5 � TDHB 1.280.750.5 .275 .500 .203 3.000 .500 .126 FC-11 FT-7S3.208F-STLDR1.28-1 � S3.208F-STLDL1.28-1 � TDHB 1.280.750.5 .275 .500 .203 3.000 1.000 .126 FC-11 FT-7S0408F-STLDR1.28-0.75 � S0408F-STLDL1.28-0.75 � TDHB 1.280.750.5 .300 .500 .259 3.000 .750 .156 FC-14 FT-7S0408F-STLDR1.28-1.25 � S0408F-STLDL1.28-1.25 � TDHB 1.280.750.5 .300 .500 .259 3.000 1.250 .156 FC-14 FT-7S0508F-STLDR1.28-1 � S0508F-STLDL1.28-1 � TDHB 1.280.750.5 .360 .500 .321 3.000 1.000 .187 FC-14 FT-7S0508F-STLDR1.28-1.5 � S0508F-STLDL1.28-1.5 � TDHB 1.280.750.5 .360 .500 .321 3.000 1.500 .187 FC-14 FT-7

S3.210H-STLDR1.28-0.5 � S3.210H-STLDL1.28-0.5 � TDHB 1.280.750.5 .275 .625 .203 4.000 .500 .126 FC-11 FT-7S3.210H-STLDR1.28-1 � S3.210H-STLDL1.28-1 � TDHB 1.280.750.5 .275 .625 .203 4.000 1.000 .126 FC-11 FT-7S0410H-STLDR1.28-0.75 � S0410H-STLDL1.28-0.75 � TDHB 1.280.750.5 .300 .625 .259 4.000 .750 .156 FC-14 FT-7S0410H-STLDR1.28-1.25 � S0410H-STLDL1.28-1.25 � TDHB 1.280.750.5 .300 .625 .259 4.000 1.250 .156 FC-14 FT-7S0510H-STLDR1.28-1 � S0510H-STLDL1.28-1 � TDHB 1.280.750.5 .360 .625 .321 4.000 1.000 .187 FC-14 FT-7S0510H-STLDR1.28-1.5 � S0510H-STLDL1.28-1.5 � TDHB 1.280.750.5 .360 .625 .321 4.000 1.500 .187 FC-14 FT-7

S0608X-STLDR2-1.12 � S0608XX-STLDL2-1.12 � TPCB-220.5 .438 .500 .390 3.750 1.125 .221 QC-21 FT-9S0608X-STLDR2-1.88 � S0608X-STLDL2-1.88 � TPCB-220.5 .438 .500 .390 3.750 1.875 .221 QC-21 FT-9

S0610X-STLDR2-1.12 � S0610X-STLDL2-1.12 � TPCB-220.5 .438 .625 .390 4.250 1.125 .221 QC-21 FT-9S0610X-STLDR2-1.88 � S0610X-STLDL2-1.88 � TPCB-220.5 .438 .625 .390 4.250 1.875 .221 QC-21 FT-9S0810X-STLDR2-1.5 � S0810X-STLDL2-1.5 � TPCB-220.5 .563 .625 .510 4.250 1.500 .296 QC-26 FT-9S0810X-STLDR2-2.5 � S0810X-STLDL2-2.5 � TPCB-220.5 .563 .625 .510 4.250 2.500 .296 QC-26 FT-9

S0612H-STLDR2-1.5 � S0612H-STLDL2-1.5 � TPCB-220.5 .438 .750 .390 4.000 1.500 .221 QC-21 FT-9S1012J-STLDR2-2.5 � S1012J-STLDL2-2.5 � TPCB-220.5 .688 .750 .625 4.500 2.500 .353 QC-26 FT-9


Dmin d1 d2 l1 l2 f

catalog number


S03G-STLDR1.28 � S03G-STLDL1.28 ▫ TDHB 1.280.750.5 .275 .187 .197 3.500 .123 FC-11 FT-7S04H-STLDR1.28 � S04H-STLDL1.28 ▫ TDHB 1.280.750.5 .300 .250 .260 4.000 .156 FC-14 FT-7S05H-STLDR1.28 � S05H-STLDL1.28 ▫ TDHB 1.280.750.5 .360 .312 .322 4.000 .187 FC-14 FT-7

S06K-STLDR2 � S06K-STLDL2 � TPCB-220.5 .438 .375 .385 5.000 .221 QC-21 FT-9S08M-STLDR2 � S08M-STLDL2 � TPCB-220.5 .563 .500 .510 6.000 .296 QC-26 FT-9

S10Q-STLDR6P � S10Q-STLDL6P � TD-6P0.5 .731 .625 .635 7.000 .393 SC-30 FT-10S12R-STLDR6P � S12R-STLDL6P � TD-6P0.5 .855 .750 .760 8.000 .460 SC-30 FT-10


Dmin d1 d2 l1 f


206

®Inch Boring Bars with Offset Steel ShanksTriangle Screw-On Inserts

catalog number


S-STF-E – 90° Lead

S0612X-STFDR2-1.5E � — TPCB-220.5 .727 .750 .375 3.750 1.500 .024 .399 .423 QC-26 FT-9

S0816X-STFDR6P-1.5E � — TD-6P0.5 .969 1.000 .500 3.750 1.500 .070 .569 .639 SC-38 FT-10S0816X-STFDR6P-2.5E � — TD-6P0.5 .969 1.000 .500 4.750 2.500 .070 .569 .639 SC-38 FT-10


Dmin d1 d2 l1 l2 f h w

catalog number


S-STL-E – 95° Lead

S0612X-STLDR2-1.5E � — TPCB-220.5 .727 .750 .375 3.750 1.500 .024 .399 .423 QC-26 FT-9

S0816X-STLDR6P-1.5E � — TD-6P0.5 .969 1.000 .500 3.750 1.500 .070 .569 .639 SC-38 FT-10S0816X-STLDR6P-2.5E � — TD-6P0.5 .969 1.000 .500 4.750 2.500 .070 .569 .639 SC-38 FT-10


Dmin d1 d2 l1 l2 f h w


207

Trigon Inserts


catalog number


S-SWU – 93° Lead

S03H-SWUDR1.5 � S03H-SWUDL1.5 � WPGT-1.510.5 .260 .187 .225 4.000 .126 MS-1438 FT-5S04H-SWUDR1.5 � S04H-SWUDL1.5 � WPGT-1.510.5 .285 .250 .260 4.000 .143 MS-1438 FT-5S05H-SWUDR1.5 � S05H-SWUDL1.5 � WPGT-1.510.5 .347 .312 .322 4.000 .174 MS-1438 FT-5

S06K-SWUDR2 � S06K-SWUDL2 � WPGT-21.50.5 .415 .187 .385 5.000 .211 MS-1153 FT-7S08M-SWUDR2 � S08M-SWUDL2 � WPGT-21.50.5 .540 .250 .510 6.000 .273 MS-1153 FT-7


Dmin d1 d2 l1 f

catalog number


S-CSE

S03X-CSER1.2 � — CPG-1.2-030-2R .272 .187 .219 2.500 .154 CC-11 FT-6S04F-CSER1.2 � — CPG-1.2-030-2R .312 .250 .260 3.000 .175 CC-11 FT-6

S06H-CSER2 � — CPG-2-030-2R .481 .375 .385 4.000 .278 QC-15 FT-8— S06H-CSEL2 � CPG-2-030-2L .481 .375 .385 4.000 .278 QC-15 FT-8

S08K-CSER2 � — CPG-2-030-2R .605 .500 .510 5.000 .340 QC-15 FT-8— S08K-CSEL2 � CPG-2-030-2L .605 .500 .510 5.000 .340 QC-15 FT-8

S10M-CSER2 � — CPG-2-030-2R .731 .625 .635 6.000 .404 QC-15 FT-8— S10M-CSEL2 � CPG-2-030-2L .731 .625 .635 6.000 .404 QC-15 FT-8


Dmin d1 d2 l1 f

Inch Threading and Grooving Bars with Steel ShankScrew-On Inserts

* Dimensions shown are taken over the nose radius of grooving insert style CPG.These bars are also designed to be used with threading style inserts CPT, see insert section for details.

Note: Flat on bar positions insert at 3° negative rake and .010" above centerline.


208

®Inch Boring Bars with Coolant Capable Steel ShankTriangle Screw-On

catalog number


A-STF – 90° Lead

A08M-STFDR2 � — TPCB-220.5 .563 .500 .510 6.000 .296 QC-26 FT-9

A10Q-STFDR6P � — TD-6P0.5 .731 .625 .635 7.000 .393 SC-30 FT-10A12R-STFDR6P � — TD-6P0.5 .855 .750 .760 8.000 .460 SC-38 FT-10


Dmin d1 d2 l1 f

catalog number


A-STL – 95° Lead

A06K-STLDR2 � — TPCB- 220.5 .438 .375 .385 5.000 .221 QC-21 FT-9A08M-STLDR2 � — TPCB- 220.5 .563 .500 .510 6.000 .296 QC-26 FT-9

A10Q-STLDR6P � — TP-6P0.5 .731 .625 .635 7.000 .393 SC-30 FT-10A12R-STLDR6P � — TP-6P0.5 .855 .750 .760 8.000 .460 SC-38 FT-10


Dmin d1 d2 l1 f


209

Carbide Bar and Steel Shank — 80° Diamond Insert

Carbide Shank Bars

Inch Boring Bars

catalog number


C-SCF – 90° Lead

C3.210H-SCFDR1.2-1 � C3.210H-SCFDL1.2-1 � CDHB-1.20.60.5 .244 .625 .210 4 1 .125 CC-11 FT-6C3.210K-SCFDR1.2-2 � C3.210K-SCFDL1.2-2 � CDHB-1.20.60.5 .244 .625 .210 5 2 .125 CC-11 FT-6C0410H-SCFDR1.2-1.25 � — CDHB-1.20.60.5 .292 .625 .258 4 1.25 .152 CC-11 FT-6C0410X-SCFDR1.2-2.5 � — CDHB-1.20.60.5 .292 .625 .258 5.25 2.5 .152 CC-11 FT-6

C3.208X-SCFDR1.2-1 � — CDHB-1.20.60.5 .244 .500 .210 2.5 1 .125 CC-11 FT-6C3.208G-SCFDR1.2-2 � — CDHB-1.20.60.5 .244 .500 .210 3.5 2 .125 CC-11 FT-6C0408X-SCFDR1.2-1.25 � C0408X-SCFDL1.2-1.25 � CDHB-1.20.60.5 .292 .500 .258 2.75 1.25 .152 CC-11 FT-6C0408H-SCFDR1.2-2.5 � — CDHB-1.20.60.5 .292 .500 .258 4 2.5 .152 CC-11 FT-6


Dmin d1 d2 l1 l2 f

catalog number


C03H-SCFDR1.2 � C03H-SCFDL1.2 � CDHB-1.20.60.5 .231 .187 .193 4.000 .117 CC-11 FT-6C04H-SCFDR1.2 � C04H-SCFDL1.2 � CDHB-1.20.60.5 .292 .250 .258 4.000 .152 CC-11 FT-6

C04M-SCFDR1.2 � C04M-SCFDL1.2 � CDHB-1.20.60.5 .292 .250 .258 6.000 .152 CC-11 FT-6C05M-SCFDR1.2 � C05M-SCFDL1.2 � CDHB-1.20.60.5 .356 .312 .322 6.000 .185 CC-11 FT-6


Dmin d1 d2 l1 f


210

®Inch Boring BarsCarbide Bar with Steel Shank — 80° Diamond Inserts

Carbide Shank Bars

catalog number


C-SCL – 95° Lead

C2.910X-SCLDR1.2-0.88 � C2.910X-SCLDL1.2-0.88 � CDHB-1.20.60.5 .208 .625 .189 3.875 0.875 .104 CC-9 FT-6C2.910X-SCLDR1.2-1.88 � C2.910X-SCLDL1.2-1.88 � CDHB-1.20.60.5 .208 .625 .189 4.875 1.875 .104 CC-9 FT-6C3.210H-SCLDR1.2-1 � C3.210H-SCLDL1.2-1 � CDHB-1.20.60.5 .230 .625 .210 4 1 .119 CC-11 FT-6C3.210K-SCLDR1.2-2 � C3.210K-SCLDL1.2-2 � CDHB-1.20.60.5 .230 .625 .210 5 2 .119 CC-11 FT-6C0410H-SCLDR1.2-1.25 � C0410H-SCLDL1.2-1.25 � CDHB-1.20.60.5 .285 .625 .258 4 1.25 .145 CC-11 FT-6C0410X-SCLDR1.2-2.5 � C0410X-SCLDL1.2-2.5 � CDHB-1.20.60.5 .285 .625 .258 5.25 2.5 .145 CC-11 FT-6

C2.908X-SCLDR1.2-0.88 � C2.908X-SCLDL1.2-0.88 � CDHB-1.20.60.5 .208 .500 .189 2.375 0.875 .104 CC-9 FT-6C2.908X-SCLDR1.2-1.88 � — � CDHB-1.20.60.5 .208 .500 .189 3.375 1.875 .104 CC-9 FT-6C3.208X-SCLDR1.2-1 � C3.208X-SCLDL1.2-1 � CDHB-1.20.60.5 .230 .500 .210 2.5 1 .119 CC-11 FT-6C3.208G-SCLDR1.2-2 � — � CDHB-1.20.60.5 .230 .500 .210 3.5 2 .119 CC-11 FT-6C0408X-SCLDR1.2-1.25 � C0408X-SCLDL1.2-1.25 � CDHB-1.20.60.5 .285 .500 .258 2.75 1.25 .145 CC-11 FT-6C0408H-SCLDR1.2-2.5 � C0408H-SCLDL1.2-2.5 � CDHB-1.20.60.5 .285 .500 .258 4 2.5 .145 CC-11 FT-6


Dmin d1 d2 l1 l2 f

catalog number


C03H-SCLDR1.2 � C03H-SCLDL1.2 � CDHB-1.20.60.5 .222 .187 .193 4.000 .111 CC-11 FT-6C03M-SCLDR1.2 � C03M-SCLDL1.2 � CDHB-1.20.60.5 .222 .187 .193 6.000 .111 CC-11 FT-6

C04H-SCLDR1.2 � C04H-SCLDL1.2 � CDHB-1.20.60.5 .285 .250 .258 4.000 .145 CC-11 FT-6C04M-SCLDR1.2 � C04M-SCLDL1.2 � CDHB-1.20.60.5 .285 .250 .258 6.000 .145 CC-11 FT-6

C05M-SCLDR1.2 � C05M-SCLDL1.2 � CDHB-1.20.60.5 .356 .312 .322 6.000 .185 CC-11 FT-6


Dmin d1 d2 l1 f


211

45° Diamond Inserts

Inch Profiling Boring Bars with Carbide Shank

catalog number


C-SG – 95° Lead

C04M-SGLPR5 � C04M-SGLPL5 � GPCD-50.5 .400 .250 .260 6.000 .260 CT-15 FT-6

C05M-SGLPR5 � C05M-SGLPL5 � GPCD-50.5 .463 .312 .322 6.000 .291 CT-15 FT-6


Dmin d1 d2 l1 f

catalog number


C-SG – 67° 30' Lead

C04M-SG22.5PR5 � C04M-SG22.5PL5 � GPCD-50.5 .400 .250 .260 6.000 .260 CT-15 FT-6

C05M-SG22.5PR5 � C05M-SG22.5PL5 � GPCD-50.5 .463 .312 .322 6.000 .291 CT-15 FT-6


Dmin d1 d2 l1 f


212

®Inch Boring BarsCarbide Bar with Steel Shank — Triangle Inserts

Carbide Shank Bars

catalog number


C-STF – 90° Lead

C3.208X-STFDR1.28-1 � — TDHB-1.280.750.5 .275 .500 .207 2.500 1.000 .134 FC-11 FT-7C3.208G-STFDR1.28-2 � — TDHB-1.280.750.5 .275 .500 .207 3.500 2.000 .134 FC-11 FT-7C0408X-STFDR1.28-1.25 � — TDHB-1.280.750.5 .300 .500 .260 2.750 1.250 .156 FC-14 FT-7C0408H-STFDR1.28-2.5 � — TDHB-1.280.750.5 .300 .500 .260 4.000 2.500 .156 FC-14 FT-7C0508F-STFDR1.28-1.5 � — TDHB-1.280.750.5 .360 .500 .322 3.000 1.500 .187 FC-14 FT-7C0508X-STFDR1.28-3.12 � — TDHB-1.280.750.5 .360 .500 .322 4.625 3.125 .187 FC-14 FT-7

C0310H-STFDR1.28-1 � — TDHB-1.280.750.5 .275 .625 .207 4.000 1.000 .134 FC-11 FT-7C0310K-STFDR1.28-2 � — TDHB-1.280.750.5 .275 .625 .207 5.000 2.000 .134 FC-11 FT-7C0410H-STFDR1.28-1.25 � — TDHB-1.280.750.5 .300 .625 .260 4.000 1.250 .156 FC-14 FT-7C0410X-STFDR1.28-2.5 � — TDHB-1.280.750.5 .300 .625 .260 5.250 2.500 .156 FC-14 FT-7C0510H-STFDR1.28-1.5 � — TDHB-1.280.750.5 .360 .625 .322 4.000 1.500 .187 FC-14 FT-7C0510X-STFDR1.28-3.12 � — TDHB-1.280.750.5 .360 .625 .322 5.625 3.125 .187 FC-14 FT-7


Dmin d1 d2 l1 l2 f

catalog number


C04M-STFDR1.28 � C04M-STFDL1.28 � TDHB-1.280.750.5 .300 .250 .260 6.000 .156 FC-14 FT-7C05M-STFDR1.28 � C05M-STFDL1.28 � TDHB-1.280.750.5 .360 .312 .322 6.000 .187 FC-14 FT-7

C06S-STFDR2 � C06S-STFDL2 � TPCB-220.5 .438 .375 .390 10.000 .221 QC-21 FT-9C08S-STFDR2 � C08S-STFDL2 � TPCB-220.5 .563 .500 .510 10.000 .296 QC-26 FT-9

C10M-STFPR6P � C10M-STFPL6P � TD-6P0.5 .731 .625 .635 6.000 .393 SC-30 FT-10C12S-STFPR6P � C12S-STFPL6P � TD-6P0.5 .855 .750 .760 10.000 .460 SC-30 FT-10


Dmin d1 d2 l1 f


213

Carbide Bar with Steel Shank — Triangle Inserts

Carbide Shank Bars

Inch Boring Bars

catalog number


C-STL – 95° Lead

C3.208X-STLDR1.28-1 � C3.208X-STLDL1.28-1 � TDHB-1.280.750.5 .275 .500 .207 2.500 1.000 .126 FC-11 FT-7C3.208G-STLDR1.28-2 � — TDHB-1.280.750.5 .275 .500 .207 3.500 2.000 .126 FC-11 FT-7

C0408X-STLDR1.28-1.25 � C0408X-STLDL1.28-1.25 � TDHB-1.280.750.5 .300 .500 .260 2.750 1.250 .156 FC-14 FT-7C0408H-STLDR1.28-2.5 � — TDHB-1.280.750.5 .300 .500 .260 4.000 2.500 .156 FC-14 FT-7

C0508F-STLDR1.28-1.5 � C0508F-STLDL1.28-1.5 � TDHB-1.280.750.5 .360 .500 .322 3.000 1.500 .187 FC-14 FT-7C0508X-STLDR1.28-3.12 � — TDHB-1.280.750.5 .360 .500 .322 4.625 3.125 .187 FC-14 FT-7

C0310H-STLDR1.28-1 � C0310H-STLDL1.28-1 � TDHB-1.280.750.5 .275 .625 .207 4.000 1.000 .126 FC-11 FT-7C0310K-STLDR1.28-2 � — TDHB-1.280.750.5 .275 .625 .207 5.000 2.000 .126 FC-11 FT-7

C0410H-STLDR1.28-1.25 � C0410H-STLDL1.28-1.25 � TDHB-1.280.750.5 .300 .625 .260 4.000 1.250 .156 FC-14 FT-7C0410X-STLDR1.28-2.5 � — TDHB-1.280.750.5 .300 .625 .260 5.250 2.500 .156 FC-14 FT-7

C0510H-STLDR1.28-1.5 � C0510H-STLDL1.28-1.5 � TDHB-1.280.750.5 .360 .625 .322 4.000 1.500 .187 FC-14 FT-7C0510X-STLDR1.28-3.12 � — TDHB-1.280.750.5 .360 .625 .322 5.625 3.125 .187 FC-14 FT-7


Dmin d1 d2 l1 l2 f

catalog number


C04M-STLDR1.28 � C04M-STLDL1.28 � TDHB-1.280.750.5 .300 .250 .260 6.000 .156 FC-14 FT-7C05M-STLDR1.28 � C05M-STLDL1.28 � TDHB-1.280.750.5 .360 .312 .322 6.000 .187 FC-14 FT-7

C06S-STLDR2 � C06S-STLDL2 � TPCB-220.5 .438 .375 .390 10.000 .221 QC-21 FT-9C08S-STLDR2 � C08S-STLDL2 � TPCB-220.5 .563 .500 .510 10.000 .296 QC-26 FT-9

C10M-STLDR6P � C10M-STLDL6P � TD-6P0.5 .731 .625 .635 6.000 .393 SC-30 FT-10C12S-STLDR6P � C12S-STLDL6P � TD-6P0.5 .855 .750 .760 10.000 .460 SC-30 FT-10


Dmin d1 d2 l1 f


214

®Inch Boring Bars with Carbide ShankTrigon Inserts

catalog number


C-SWU – 93° Lead

C03M-SWUDR1.5 � C03M-SWUDL1.5 � WPGT-1.510.5 .260 .187 .225 6.000 .126 MS-1438 FT-5C04M-SWUDR1.5 � C04M-SWUDL1.5 � WPGT-1.510.5 .285 .250 .260 6.000 .143 MS-1438 FT-5C05M-SWUDR1.5 � C05M-SWUDL1.5 � WPGT-1.510.5 .347 .312 .322 6.000 .174 MS-1438 FT-5

C06M-SWUDR2 � C06M-SWUDL2 � WPGT-21.50.5 .415 .375 .385 6.000 .211 MS-1153 FT-7C08R-SWUDR2 � C08R-SWUDL2 � WPGT-21.50.5 .540 .500 .510 8.000 .273 MS-1153 FT-7


Dmin d1 d2 l1 f

catalog number


*

C-CSE

C03H-CSER1.2 � — CPG-1.2-030-2R .272 .187 .219 4.000 .154 CC-11 FT-6C04H-CSER1.2 � — CPG-1.2-030-2R .312 .250 .260 4.000 .175 CC-11 FT-6

C06M-CSER2 � — � CPG-2-030-2R .481 .375 .510 6.000 .278 QC-15 FT-8— � C06M-CSEL2 � CPG-2-030-2L .481 .375 .510 6.000 .278 QC-15 FT-8

C08R-CSER2 � — � CPG-2-030-2R .605 .500 .510 8.000 .340 QC-15 FT-8— � C08R-CSEL2 � CPG-2-030-2L .605 .500 .510 8.000 .340 QC-15 FT-8

C10S-CSER2 � — � CPG-2-030-2R .731 .625 .635 10.000 .404 QC-15 FT-8— � C10S-CSEL2 � CPG-2-030-2L .731 .625 .635 10.000 .404 QC-15 FT-8


Dmin d1 d2 l1 f

Inch Threading and Grooving Bars with Carbide Shank

* Dimensions shown are taken over the nose radius of grooving insert style CPG.These bars are also designed to be used with threading style inserts CPT, see insert section for details.

Note: Flat on bar positions insert at 3° negative rake and .010" above centerline.


215

80° Diamond Screw-On Inserts

Inch Boring Bars with Coolant Capable Carbide Shank

catalog number


E-SCF – 90° Lead

E03H-SCFDR1.2 � E03H-SCFDL1.2 ▫ CDHB-1.20.60.5 .231 .187 .193 4.000 .117 CC-11 FT-6E03M-SCFDR1.2 � E03M-SCFDL1.2 ▫ CDHB-1.20.60.5 .231 .187 .193 6.000 .117 CC-11 FT-6

E04H-SCFDR1.2 ▫ — CDHB-1.20.60.5 .292 .250 .258 4.000 .152 CC-11 FT-6E04M-SCFDR1.2 � — CDHB-1.20.60.5 .292 .250 .258 6.000 .152 CC-11 FT-6


Dmin d1 d2 l1 f

catalog number


E-SCL – 95° Lead

E2.5M-SC7DR1.2* � E2.5M-SC7DL1.2* ▫ CDHB-1.20.60.5 .180 .156 .165 6.000 .094 CC-09 FT-6

E03H-SCLDR1.2 � — CDHB-1.20.60.5 .208 .187 .189 4.000 .104 CC-09 FT-6E03M-SCLDR1.2 � E03M-SCLDL1.2 ▫ CDHB-1.20.60.5 .208 .187 .189 6.000 .104 CC-09 FT-6E03H-SCLDR1.2A � E03H-SCLDL1.2A � CDHB-1.20.60.5 .222 .187 .193 4.000 .111 CC-11 FT-6E03M-SCLDR1.2A � E03M-SCLDL1.2A � CDHB-1.20.60.5 .222 .187 .193 6.000 .111 CC-11 FT-6

E04H-SCLDR1.2 � E04H-SCLDL1.2 � CDHB-1.20.60.5 .285 .250 .258 4.000 .145 CC-11 FT-6E04M-SCLDR1.2 � E04M-SCLDL1.2 ▫ CDHB-1.20.60.5 .285 .250 .258 6.000 .145 CC-11 FT-6


Dmin d1 d2 l1 f


* 97° on these bars

*

216

®Inch Boring Bars with Coolant Capable Carbide ShankTriangle Screw-On Inserts

catalog number


E-STF – 90° Lead

E03H-STFDR1.28 ▫ E03H-STFDL1.28 � TDHB-1.280.750.5 .275 .187 .203 4.000 .134 FC-11 FT-7E03M-STFDR1.28 ▫ E03M-STFDL1.28 ▫ TDHB-1.280.750.5 .275 .187 .203 6.000 .134 FC-11 FT-7

E04H-STFDR1.28 � E04H-STFDL1.28 ▫ TDHB-1.280.750.5 .300 .250 .260 4.000 .156 FC-14 FT-7E04M-STFDR1.28 ▫ E04M-STFDL1.28 � TDHB-1.280.750.5 .300 .250 .260 6.000 .156 FC-14 FT-7

E05H-STFDR1.28 � E05H-STFDL1.28 � TDHB-1.280.750.5 .360 .312 .322 4.000 .187 FC-14 FT-7E05M-STFDR1.28 � E05M-STFDL1.28 � TDHB-1.280.750.5 .360 .312 .322 6.000 .187 FC-14 FT-7

E06S-STFDR2 � E06S-STFDL2 � TPCB-220.5 .438 .375 .390 10.000 .221 QC-21 FT-9E08S-STFDR2 � E08S-STFDL2 � TPCB-220.5 .563 .500 .510 10.000 .296 QC-26 FT-9

E10M-STFDR6P � E10M-STFDL6P � TD-6P0.5 .731 .625 .635 6.000 .393 SC-30 FT-10E12S-STFDR6P � E12S-STFDL6P � TD-6P0.5 .855 .750 .760 10.000 .460 SC-30 FT-10


Dmin d1 d2 l1 f

catalog number


E-STL – 95° Lead

E03H-STLDR1.28 � E03H-STLDL1.28 � TDHB-1.280.750.5 .275 .187 .203 4.000 .126 FC-11 FT-7E03M-STLDR1.28 � E03M-STLDL1.28 � TDHB-1.280.750.5 .275 .187 .203 6.000 .126 FC-11 FT-7

E04H-STLDR1.28 � E04H-STLDL1.28 ▫ TDHB-1.280.750.5 .300 .250 .260 4.000 .156 FC-14 FT-7E04M-STLDR1.28 � E04M-STLDL1.28 ▫ TDHB-1.280.750.5 .300 .250 .260 6.000 .156 FC-14 FT-7

E05H-STLDR1.28 � E05H-STLDL1.28 ▫ TDHB-1.280.750.5 .360 .312 .322 4.000 .187 FC-14 FT-7E05M-STLDR1.28 � E05M-STLDL1.28 ▫ TDHB-1.280.750.5 .360 .312 .322 6.000 .187 FC-14 FT-7

E06S-STLDR2 � E06S-STLDL2 � TPCB-220.5 .438 .375 .390 10.000 .221 QC-21 FT-9E08S-STLDR2 � E08S-STLDL2 � TPCB-220.5 .563 .500 .510 10.000 .296 QC-26 FT-9

E10M-STLDR6P � E10M-STLDL6P � TD-6P0.5 .731 .625 .635 6.000 .393 SC-30 FT-10E12S-STLDR6P � E12S-STLDL6P � TD-6P0.5 .855 .750 .760 10.000 .460 SC-30 FT-10


Dmin d1 d2 l1 f


217

Steel and Carbide

Boring Bar Sets and Accessories

KCS (Steel)

setcatalog number

set contents bars

KCS-10 S03X-SC7DR1.2A 1 CDHB-1.20.60.5 10 CC-09 FT-6S03X-SCLDR1.2 1 (KC5010) CC-11S04F-SCLDR1.2 1

insert(grade) qtyqty screws wrenches

Driver Bits

catalog number description

BW078 hex bit 5/16" 12 - 25BT6 #6 Torx Bit 4 - 5BT7 #7 Torx Bit 7 - 8BT8 #8 Torx Bit 12 - 14BT9 #9 Torx Bit 12 - 14BT10 #10 Torx Bit 12 - 15

torquein./lbs

Driver Handle


DRIVER Magnetic Bit Driver Handle

Torque Driver


CTS30 Adjustable Magnetic Torque Driver

Level


UNILEVEL Adjustable Precision Setup Level

KCC (Carbide)

setcatalognumber

set contents bars

KCC-10 E03H-SCLDR1.2 1 CDHB-1.20.60.5 10 CC-09 FT-6E03H-SCLDR1.2A 1 (KC5010) CC-11E04H-SCLDR1.2 1

insert(grade) qtyqty screws wrenches

KCSC (Steel/Carbide)

setcatalognumber

set contents bars

KCSC-10 S03X-SC7DR1.2 1 CDHH-1.20.60.51 5 FT-7E03M-SCLDR1.2A 1 (KC5010) FT-6S04H-STLDR1.28 1 TDHH-1.280.750.51 5S05H-STFDR1.28 1 (KC5010)

insert(grade) qtyqty wrenches

218

KennametalTHE METALCUTTING AUTHORITY ™

PRESENTING...

TOLL-FREE CUSTOMERAPPLICATION SUPPORT

Get the metalcutting industry’s most

experienced and reliable technical and

product-application advice… absolutely

FREE! Our problem-solving/troubleshooting

professionals are standing by to ensure

that your Kennametal tools provide

optimum performance.

800/835-3668 (USA and Canada)

Monday-Friday, 7am – 7pm

(724/539-6921 outside the USA and Canada)

www.kennametal.com

219

Dynapoint® TF Drill

K105, B105 (without coolant) . . . . . . . . . . . . . 220

Dynapoint SE Drill

B221, K222 (without coolant). . . . . . . . . . . . . . . . . 225

General Purpose

Series CR100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230

Series CH110. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233

Series CS120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236

Series CN130 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238

Combined Drill and Countersink . . . . . . . . . . . . . . . . . . . 238

High-PerformanceSolid Carbide Drills page

220

®High-Performance Solid Carbide DrillsDynapoint TF Drills without CoolantK105 - inch sizes .113" to .810" regular length grades K10 and KC7210B105 - metric sizes 3 mm to 21 mm regular length grades K10 and KC7210

grade composition and application

K10 composition: An uncoated straight 6% cobalt grade. Fine grain. Good wear resistance with some toughness.application: Use on gray cast iron, aluminum, and non-ferrous workpiece materials.geometry: Lightly honed cutting edges.

KC7210 composition: A PVD TiAlN-coated grade. Straight 6% cobalt substrate.Fine grain. Good hot hardness and toughness.application: Designed for use on gray cast iron workpiece materials, wet or dry applications.geometry: Lightly honed cutting edges.

Grade Description

Primary ApplicationThe TF105 drill, with its triple flutes and high-performance 130° point, is an excellent carbide drill for gray cast iron, ductile iron, aluminum, non-ferrous materials,and short-hole titanium applications.

Features• Three spacious helical flutes provide

rapid chip evacuation and heat dissipationto enable higher metal removal rates.

• Three active cutting edges and landsoffer better centering characteristics compared to two-edged drills.

• The additional cutting edge also lessensthe overall wear on the drill.

• A light hone increases edge strengthand durability.

• The carbide substrate is nicely balanced for toughness and wear resistance.

• TiAlN coated grade KC7210 provideshigher hot hardness compared to grade K10.

• The TiAlN coating serves as an insulator tothe drill substrate and sends heat into thechips, rather than the drill. This allowsKC7210 to operate at higher speedswithout sacrificing tool life. These drills workwell with flood or mist coolant and in drydrilling, too.

• Drills can be factory reconditioned byKennametal to original specifications.

• Combine TF105 drills with hydraulic chucksfor optimal performance and tool life.

• TF105 drills are made to operate at elevated speeds and feeds. Pleaserefer to the application charts shown on page 575 of Holemaking Catalog 0070(A00-2).

Application ConsiderationsWhen machining titanium, make sure it is ashort-hole application with a good supply offlood coolant.

The TF drill with TiAlN coating KC7210 is bestsuited for harder, abrasive, short-chippingmaterial like gray cast iron, ductile iron, andmalleable cast iron. The TiAlN-coated drillworks very well with flood or mist coolant andin dry drilling.

workpiecematerial group

hardness/type

★ = 1st choiceO = 2nd choiceX = not recommended

drill application recommendation

- / low high / +

low-carbon steels (< .25% C) (<220 HB)

free-machining (<275 HB) steels

medium and high plain-carbon (≤330 HB) alloy, and tool steels

medium and high plain-carbon (340-450 HB) alloy, and tool steels

ferritic, martensitic, and (<375 HB)PH stainless steels

austenitic (135-275 HB) stainless steels

ductile (nodular) and (120-320 HB)malleable cast irons

gray cast irons (120-320 HB)

free-machining and hypoeutectic low-silicon aluminum alloys (<12.2% Si)

high-silicon hypereutectic aluminum alloys (>12.2% Si)

miscellaneous non-ferrous workpiece materials

iron-base, (135-320 HB) heat-resistant alloys

cobalt-base, (150-425 HB) heat-resistant alloys

nickel-base, (140-475 HB) heat-resistant alloys

titanium and (110-450 HB) titanium alloys

hardened (> 450 HB) materials

X

X

X

X

X

X

★

★

★

X

★

X

X

X

O

X

NOTE: See page 575 in Catalog 0070 for additional technical information.

221

Dynapoint TF Drills without Coolant

High-Performance Solid Carbide Drills

B105 – metric

d1

≤ 3 0,002/0,012 6 0,000/-0,008>3 to 6 0,004/0,016 8 to 10 0,000/-0,009>6 to 10 0,006/0,021 12 to 18 0,000/-0,011>10 to 18 0,007/0,025 20 0,000/-0,013>18 to 21 0,008/0,029 — —

tolerances

tolerancem7

d2tolerance

h6

3,00 .1181 B105A03000 6 66 28 23 36 0,75 ■ ■

3,10 .1220 B105A03100 6 66 28 23 36 0,77 ■

3,20 .1260 B105A03200 6 66 28 23 36 0,80 ■ ■

3,30 .1299 B105A03300 6 66 28 23 36 0,82 ■

3,50 .1378 B105A03500 6 66 28 23 36 0,87 ■ ■

3,70 .1457 B105A03700 6 66 28 23 36 0,92 ■

3,80 .1496 B105A03800 6 74 36 29 36 0,95 ■

4,00 .1575 B105A04000 6 74 36 29 36 1,00 ■ ■

4,10 .1614 B105A04100 6 74 36 29 36 1,02 ■

4,20 .1654 B105A04200 6 74 36 29 36 1,05 ■ ■

4,30 .1693 B105A04300 6 74 36 29 36 1,07 ■

4,50 .1772 B105A04500 6 74 36 29 36 1,12 ■ ■

4,65 .1831 B105A04650 6 74 36 29 36 1,16 ■

4,70 .1850 B105A04700 6 74 36 29 36 1,17 ■

4,80 .1890 B105A04800 6 82 44 35 36 1,20 ■

5,00 .1969 B105A05000 6 82 44 35 36 1,25 ■ ■

5,10 .2008 B105A05100 6 82 44 35 36 1,27 ■

5,20 .2047 B105A05200 6 82 44 35 36 1,30 ■

5,50 .2165 B105A05500 6 82 44 35 36 1,37 ■ ■

5,55 .2185 B105A05550 6 82 44 35 36 1,39 ■

5,70 .2244 B105A05700 6 82 44 35 36 1,42 ■

5,80 .2283 B105A05800 6 82 44 35 36 1,45 ■

6,00 .2362 B105A06000 6 82 44 35 36 1,50 ■ ■

6,10 .2402 B105A06100 8 91 53 43 36 1,52 ■

6,30 .2480 B105A06300 8 91 53 43 36 1,57 ■

6,40 .2520 B105A06400 8 91 53 43 36 1,60 ■

6,50 .2559 B105A06500 8 91 53 43 36 1,62 ■ ■

6,60 .2598 B105A06600 8 91 53 43 36 1,65 ■

6,70 .2638 B105A06700 8 91 53 43 36 1,67 ■

6,80 .2677 B105A06800 8 91 53 43 36 1,70 ■ ■

7,00 .2756 B105A07000 8 91 53 43 36 1,75 ■ ■

7,10 .2795 B105A07100 8 91 53 43 36 1,77 ■

7,40 .2913 B105A07400 8 91 53 43 36 1,85 ■

l5mm

l4mm

l3mm

l2mm

l1mm

d2mm

d1

mm decimal

grade

K10 KC7210

catalog number

222

®High-Performance Solid Carbide DrillsDynapoint TF Drills without CoolantB105 – metric

7,50 .2953 B105A07500 8 91 53 43 36 1,87 ■

7,60 .2992 B105A07600 8 91 53 43 36 1,90 ■

7,80 .3071 B105A07800 8 91 53 43 36 1,95 ■

8,00 .3150 B105A08000 8 91 53 43 36 2,00 ■ ■

8,10 .3189 B105A08100 10 103 61 49 40 2,02 ■

8,30 .3268 B105A08300 10 103 61 49 40 2,07 ■

8,40 .3307 B105A08400 10 103 61 49 40 2,10 ■

8,50 .3346 B105A08500 10 103 61 49 40 2,12 ■ ■

8,60 .3386 B105A08600 10 103 61 49 40 2,15 ■

8,70 .3425 B105A08700 10 103 61 49 40 2,17 ■

8,80 .3465 B105A08800 10 103 61 49 40 2,20 ■

9,00 .3543 B105A09000 10 103 61 49 40 2,25 ■ ■

9,10 .3583 B105A09100 10 103 61 49 40 2,27 ■

9,30 .3661 B105A09300 10 103 61 49 40 2,32 ■

9,50 .3740 B105A09500 10 103 61 49 40 2,37 ■ ■

9,70 .3819 B105A09700 10 103 61 49 40 2,42 ■

9,80 .3858 B105A09800 10 103 61 49 40 2,45 ■

10,00 .3937 B105A10000 10 103 61 49 40 2,50 ■ ■

10,10 .3976 B105A10100 12 118 71 56 45 2,52 ■

10,20 .4016 B105A10200 12 118 71 56 45 2,55 ■

10,30 .4055 B105A10300 12 118 71 56 45 2,57 ■

10,50 .4134 B105A10500 12 118 71 56 45 2,62 ■ ■

10,70 .4213 B105A10700 12 118 71 56 45 2,67 ■

10,80 .4252 B105A10800 12 118 71 56 45 2,70 ■

11,00 .4331 B105A11000 12 118 71 56 45 2,75 ■ ■

11,10 .4370 B105A11100 12 118 71 56 45 2,77 ■

11,20 .4409 B105A11200 12 118 71 56 45 2,80 ■

11,50 .4528 B105A11500 12 118 71 56 45 2,87 ■ ■

11,70 .4606 B105A11700 12 118 71 56 45 2,92 ■

11,80 .4646 B105A11800 12 118 71 56 45 2,95 ■

12,00 .4724 B105A12000 12 118 71 56 45 3,00 ■ ■

12,10 .4764 B105A12100 14 124 77 60 45 3,02 ■

12,50 .4921 B105A12500 14 124 77 60 45 3,12 ■

l5mm

l4mm

l3mm

l2mm

l1mm

d2mm

d1

mm decimal

grade

K10 KC7210

catalog number

d1

≤ 3 0,002/0,012 6 0,000/-0,008>3 to 6 0,004/0,016 8 to 10 0,000/-0,009>6 to 10 0,006/0,021 12 to 18 0,000/-0,011>10 to 18 0,007/0,025 20 0,000/-0,013>18 to 21 0,008/0,029 — —

tolerances

tolerancem7

d2tolerance

h6

223223223

Dynapoint TF Drills without Coolant


K105 – inch

.1130 33 2,87 K105A01130 KTF01130 .1875 2.60 1.06 .843 1.44 .030 ■

.1250 1/8 3,18 K105A01250 KTF01250 .1875 2.60 1.06 .843 1.44 .031 ■ ■

.1285 30 3,26 K105A01285 KTF01285 .1875 2.60 1.06 .843 1.44 .032 ■ ■

.1360 29 3,45 K105A01360 KTF01360 .1875 2.60 1.06 .843 1.44 .034 ■

.1364 3,46 K105A01364 .1875 2.60 1.06 .843 1.44 .034 ■

.1395 3,54 K105A01395 .1875 2.60 1.06 .843 1.44 .035 ■

.1406 9/64 3,57 K105A01406 KTF01406 .1875 2.60 1.06 .843 1.44 .035 ■ ■

.1440 27 3,66 K105A01440 KTF01440 .1875 2.60 1.06 .843 1.44 .036 ■

.1495 25 3,80 K105A01495 .1875 2.60 1.06 .843 1.44 .037 ■

.1502 3,82 K105A01502 .1875 2.60 1.06 .843 1.44 .038 ■

.1517 3,85 K105A01517 .1875 2.60 1.06 .843 1.44 .038 ■

.1532 3,89 K105A01532 .1875 2.60 1.06 .843 1.44 .038 ■

.1563 5/32 3,97 K105A01563 KTF01563 .1875 2.60 1.06 .843 1.44 .039 ■ ■

.1590 21 4,04 K105A01590 KTF01590 .1875 2.91 1.38 1.126 1.44 .040 ■

.1624 4,12 K105A01624 .1875 2.91 1.38 1.126 1.44 .041 ■

.1630 4,14 K105A01630 KTF01630 .1875 2.91 1.38 1.126 1.44 .041 ■

.1631 4,14 K105A01631 KTF01631 .1875 2.91 1.38 1.126 1.44 .041 ■

.1660 19 4,22 K105A01660 KTF01660 .1875 2.91 1.38 1.126 1.44 .041 ■

.1695 18 4,31 K105A01695 KTF01695 .1875 2.91 1.38 1.126 1.44 .042 ■

.1716 4,36 K105A01716 .1875 2.91 1.38 1.126 1.44 .043 ■

.1719 11/64 4,37 K105A01719 KTF01719 .1875 2.91 1.38 1.126 1.44 .043 ■ ■

.1730 17 4,39 K105A01730 KTF01730 .1875 2.91 1.38 1.126 1.44 .043 ■

.1762 4,48 K105A01762 .1875 2.91 1.38 1.126 1.44 .044 ■

.1781 4,52 K105A01781 .1875 2.91 1.38 1.126 1.44 .044 ■

.1820 14 4,62 K105A01820 .1875 2.91 1.38 1.126 1.44 .045 ■

.1835 4,66 K105A01835 .1875 2.91 1.38 1.126 1.44 .046 ■

.1875 3/16 4,76 K105A01875 KTF01875 .1875 2.91 1.38 1.126 1.44 .047 ■ ■

.1890 12 4,80 K105A01890 KTF01890 .2500 3.23 1.69 1.374 1.44 .047 ■

.1910 11 4,85 K105A01910 KTF01910 .2500 3.23 1.69 1.374 1.44 .048 ■

.1935 10 4,91 K105A01935 KTF01935 .2500 3.23 1.69 1.374 1.44 .048 ■

.1976 5,02 K105A01976 .2500 3.23 1.69 1.374 1.44 .049 ■

.2002 5,09 K105A02002 .2500 3.23 1.69 1.374 1.44 .050 ■

.2045 5,19 K105A02045 .2500 3.23 1.69 1.374 1.44 .051 ■

.2130 3 5,41 K105A02130 .2500 3.23 1.69 1.374 1.44 .053 ■

.2175 5,52 K105A02175 .2500 3.23 1.69 1.374 1.44 .054 ■

.2188 7/32 5,56 K105A02188 KTF02188 .2500 3.23 1.69 1.374 1.44 .055 ■ ■

.2279 5,79 K105A02279 .2500 3.23 1.69 1.374 1.44 .057 ■

.2280 1 5,79 K105A02280 KTF02280 .2500 3.23 1.69 1.374 1.44 .057 ■

.2342 5,95 K105A02342 .2500 3.23 1.69 1.374 1.44 .059 ■

l5l4l3l2l1d2

sizedecimal mm

d1

K10 KC7210

grade

new old

catalog number

See page 82 of Holemaking Catalog 0070 (A00-2) for the Dyna-Fit tap drill program.

d1

≤.1181 .0001/.0005 .1875 .0000/-.0003>.1181 to .2362 .0002/.0006 .2500 to .6875 .0000/-.0004>.2362 to .3937 .0002/.0008 .7500 to .8125 .0000/-.0005>.3937 to .7087 .0003/.0010 — —>.7087 to .8101 .0003/.0011 — —

tolerances

tolerancem7

d2tolerance

h6

224

®High-Performance Solid Carbide DrillsDynapoint TF Drills without Coolant

K10 KC7210

grade

.2500 1/4, E 6,35 K105A02500 KTF02500 .2500 3.23 1.69 1.374 1.44 .062 ■ ■

.2530 6,43 K105A02530 KTF02530 .3125 3.58 1.97 1.587 1.52 .063 ■

.2570 F 6,53 K105A02570 KTF02570 .3125 3.58 1.97 1.587 1.52 .064 ■ ■

.2620 6,65 K105A02620 .3125 3.58 1.97 1.587 1.52 .065 ■

.2656 17/64 6,75 K105A02656 KTF02656 .3125 3.58 1.97 1.587 1.52 .066 ■ ■

.2720 I 6,91 K105A02720 .3125 3.58 1.97 1.587 1.52 .068 ■

.2746 6,97 K105A02746 .3125 3.58 1.97 1.587 1.52 .069 ■

.2813 9/32 7,15 K105A02813 KTF02813 .3125 3.58 1.97 1.587 1.52 .070 ■ ■

.2870 7,29 K105A02870 KTF02870 .3125 3.58 1.97 1.587 1.52 .072 ■

.2879 7,31 K105A02879 .3125 3.58 1.97 1.587 1.52 .072 ■

.2941 7,47 K105A02941 .3125 3.58 1.97 1.587 1.52 .073 ■

.2969 19/64 7,54 K105A02969 KTF02969 .3125 3.58 1.97 1.587 1.52 .074 ■ ■

.3125 5/16 7,94 K105A03125 KTF03125 .3125 3.58 1.97 1.587 1.52 .078 ■ ■

.3182 8,08 K105A03182 .3750 4.06 2.36 1.917 1.59 .079 ■

.3281 21/64 8,33 K105A03281 KTF03281 .3750 4.06 2.36 1.917 1.59 .082 ■ ■

.3320 Q 8,43 K105A03320 .3750 4.06 2.36 1.917 1.59 .083 ■

.3371 8,56 K105A03371 .3750 4.06 2.36 1.917 1.59 .084 ■

.3438 11/32 8,73 K105A03438 KTF03438 .3750 4.06 2.36 1.917 1.59 .086 ■ ■

.3474 8,82 K105A03474 .3750 4.06 2.36 1.917 1.59 .087 ■

.3566 9,06 K105A03566 .3750 4.06 2.36 1.917 1.59 .089 ■

.3594 23/64 9,13 K105A03594 KTF03594 .3750 4.06 2.36 1.917 1.59 .090 ■ ■

.3680 U 9,35 K105A03680 .3750 4.06 2.36 1.917 1.59 .092 ■

.3726 9,46 K105A03726 .3750 4.06 2.36 1.917 1.59 .093 ■

.3750 3/8 9,53 K105A03750 KTF03750 .3750 4.06 2.36 1.917 1.59 .094 ■ ■

.3906 25/64 9,92 K105A03906 KTF03906 .4375 4.37 2.60 2.091 1.67 .098 ■ ■

.3920 9,96 K105A03920 .4375 4.37 2.60 2.091 1.67 .098 ■

.4059 10,31 K105A04059 .4375 4.37 2.60 2.091 1.67 .101 ■

.4063 13/32 10,32 K105A04063 KTF04063 .4375 4.37 2.60 2.091 1.67 .101 ■ ■

.4154 10,55 K105A04154 .4375 4.37 2.60 2.091 1.67 .104 ■

.4219 27/64 10,72 K105A04219 KTF04219 .4375 4.37 2.60 2.091 1.67 .105 ■ ■

.4301 10,92 K105A04301 .4375 4.37 2.60 2.091 1.67 .107 ■

.4375 7/16 11,11 K105A04375 KTF04375 .4375 4.37 2.60 2.091 1.67 .109 ■ ■

.4531 29/64 11,51 K105A04531 KTF04531 .5000 4.65 2.76 2.189 1.79 .113 ■ ■

.4545 11,54 K105A04545 .5000 4.65 2.76 2.189 1.79 .114 ■

.4660 11,84 K105A04660 .5000 4.65 2.76 2.189 1.79 .116 ■

.4688 15/32 11,91 K105A04688 KTF04688 .5000 4.65 2.76 2.189 1.79 .117 ■ ■

.4779 12,14 K105A04779 .5000 4.65 2.76 2.189 1.79 .119 ■

.4844 31/64 12,30 K105A04844 KTF04844 .5000 4.65 2.76 2.189 1.79 .121 ■ ■

.4867 12,36 K105A04867 .5000 4.65 2.76 2.189 1.79 .122 ■

.5000 1/2 12,70 K105A05000 KTF05000 .5000 4.65 2.76 2.189 1.79 .125 ■ ■

l5l4l3l2l1d2

sizedecimal mm

d1

new old

catalog number

K105 – inch

See page 82 of Holemaking Catalog 0070 (A00-2).

d1

≤.1181 .0001/.0005 .1875 .0000/-.0003>.1181 to .2362 .0002/.0006 .2500 to .6875 .0000/-.0004>.2362 to .3937 .0002/.0008 .7500 to .8125 .0000/-.0005>.3937 to .7087 .0003/.0010 — —>.7087 to .8101 .0003/.0011 — —

tolerances

tolerancem7

d2tolerance

h6

225225225

Dynapoint SE Drills without CoolantB221 - metric sizes 3 mm to 21 mm short length grade CS5K222 - inch sizes .125" to .750" regular length grade KC7215


workpiecematerial group

hardness/type

★ = 1st choiceO = 2nd choiceX = not recommended

drill application recommendation

- / low high / +

low-carbon steels (< .25% C) (<220 HB)

free-machining (<275 HB) steels

medium and high plain-carbon (≤330 HB) alloy, and tool steels

medium and high plain-carbon (340-450 HB) alloy, and tool steels

ferritic, martensitic, and (<375 HB)PH stainless steels

austenitic (135-275 HB) stainless steels

ductile (nodular) and (120-320 HB) malleable cast irons

gray cast irons (120-320 HB)

free-machining and hypoeutectic low-silicon aluminum alloys (<12.2% Si)

high-silicon hypereutectic aluminum alloys (>12.2% Si)

miscellaneous non-ferrous workpiece materials

iron-base, (135-320 HB) heat-resistant alloys

cobalt-base, (150-425 HB) heat-resistant alloys

nickel-base, (140-475 HB) heat-resistant alloys

titanium and (110-450 HB) titanium alloys

hardened (> 450 HB) materials

★

★

★

★

X

X

O

O

X

X

X

X

X

X

X

X

NOTE: See page 575 of Holemaking Catalog 0070(A00-2) for additional technical information.

Primary ApplicationSE drills without coolant are best applied on short-hole applications. These drills mayincrease tool life compared to drills withcoolant by avoiding thermal shock at the cutting edge. Drill strength is increased by the absence of coolant holes. Deeper holesbenefit from the flushing action of the coolantto remove chips from the cutting zone.

The K222 SE drill features a KC7215 carbidegrade; the B221 drill is manufactured with aCS5 carbide grade. Both are ideal for plaincarbon, alloy, and tool steel applications. Inaddition, K222 performs well on cast iron and ductile iron.

Features• The patented high-performance SE

point defines reliability in high-speed, high-feed drilling applications.

• The carbide substrate of the SE221 drill is a multi-purpose submicron grade with TiNcoating. The SE222 features a TiAlN coatingthat offers excellent hot hardness.

• A moderate hone on the drills’ cuttingedges combined with a heavy-duty core increases drill strength and provides additional protection for the cutting edges.

• Drills can be factory reconditioned byKennametal to original specifications.

• Combine with hydraulic chucks for optimalperformance and tool life.

• These drills are made to operate at higher speeds and feeds. Please referto the application charts shown on page575 of Holemaking Catalog 0070 (A00-2).

Application ConsiderationsThe metric size B221 drill has a short flutelength for shallow-hole applications. The inch size K222 series features a regular flutelength for deeper hole applications. Both drillsare designed for flood coolant.


CS5 composition: A PVD TiN coated grade. Straight 9.5% cobalt substrate.Submicron grain. Muti-purpose use.application: Apply on plain-carbon steel, alloy steel, and ductile cast iron.geometry: Moderately honed cutting edges with a protection chamfer.

KC7215 composition: A PVD TiAlN-coated grade. Straight 9.5% cobalt substrate.Submicron grain. Multi-purpose use. Excellent wear resistance, high heatand chemical resistance, and toughness.application: A general purpose grade for steel and ductile iron applications.geometry: Moderately honed cutting edges with a protection chamfer.

Grade Description

B221 – metric

226

®High-Performance Solid Carbide DrillsDynapoint SE Drills without Coolant

3,00 .1181 B221A03000 6 62 20 14 36 0,48 ■

3,10 .1220 B221A03100 6 62 20 14 36 0,50 ■

3,20 .1260 B221A03200 6 62 20 14 36 0,52 ■

3,30 .1299 B221A03300 6 62 20 14 36 0,53 ■

3,40 .1339 B221A03400 6 62 20 14 36 0,55 ■

3,50 .1378 B221A03500 6 62 20 14 36 0,56 ■

3,60 .1417 B221A03600 6 62 20 14 36 0,58 ■

3,70 .1457 B221A03700 6 62 20 14 36 0,60 ■

3,80 .1496 B221A03800 6 66 24 17 36 0,61 ■

3,90 .1535 B221A03900 6 66 24 17 36 0,63 ■

4,00 .1575 B221A04000 6 66 24 17 36 0,65 ■

4,10 .1614 B221A04100 6 66 24 17 36 0,66 ■

4,20 .1654 B221A04200 6 66 24 17 36 0,68 ■

4,30 .1693 B221A04300 6 66 24 17 36 0,69 ■

4,40 .1732 B221A04400 6 66 24 17 36 0,71 ■

4,50 .1772 B221A04500 6 66 24 17 36 0,73 ■

4,60 .1811 B221A04600 6 66 24 17 36 0,74 ■

4,70 .1850 B221A04700 6 66 24 17 36 0,76 ■

4,80 .1890 B221A04800 6 66 28 20 36 0,77 ■

4,90 .1929 B221A04900 6 66 28 20 36 0,79 ■

5,00 .1969 B221A05000 6 66 28 20 36 0,81 ■

5,10 .2008 B221A05100 6 66 28 20 36 0,82 ■

5,20 .2047 B221A05200 6 66 28 20 36 0,84 ■

5,30 .2087 B221A05300 6 66 28 20 36 0,86 ■

5,40 .2126 B221A05400 6 66 28 20 36 0,87 ■

5,50 .2165 B221A05500 6 66 28 20 36 0,89 ■

5,60 .2205 B221A05600 6 66 28 20 36 0,90 ■

5,70 .2244 B221A05700 6 66 28 20 36 0,92 ■

5,80 .2283 B221A05800 6 66 28 20 36 0,94 ■

5,90 .2323 B221A05900 6 66 28 20 36 0,95 ■

6,00 .2362 B221A06000 6 66 28 20 36 0,97 ■

6,10 .2402 B221A06100 8 79 34 24 36 0,98 ■

gradeCS5

l5mm

l4mm

l3mm

l2mm

l1mm

d2mm

d1

mm decimal

catalog number

d1

≤ 3 0,002/0,012 6 0,000/-0,008>3 to 6 0,004/0,016 8 to 10 0,000/-0,009>6 to 10 0,006/0,021 12 to 18 0,000/-0,011>10 to 18 0,007/0,025 20 0,000/-0,013>18 to 21 0,008/0,029 — —

tolerances

tolerancem7

d2tolerance

h6

227227227

Dynapoint SE Drills without Coolant


B221 – metric

6,20 .2441 B221A06200 8 79 34 24 36 1,00 ■

6,30 .2480 B221A06300 8 79 34 24 36 1,02 ■

6,40 .2520 B221A06400 8 79 34 24 36 1,03 ■

6,50 .2559 B221A06500 8 79 34 24 36 1,05 ■

6,60 .2598 B221A06600 8 79 34 24 36 1,07 ■

6,70 .2638 B221A06700 8 79 34 24 36 1,08 ■

6,80 .2677 B221A06800 8 79 34 24 36 1,10 ■

6,90 .2717 B221A06900 8 79 34 24 36 1,11 ■

7,00 .2756 B221A07000 8 79 34 24 36 1,13 ■

7,10 .2795 B221A07100 8 79 41 29 36 1,15 ■

7,20 .2835 B221A07200 8 79 41 29 36 1,16 ■

7,30 .2874 B221A07300 8 79 41 29 36 1,18 ■

7,40 .2913 B221A07400 8 79 41 29 36 1,19 ■

7,50 .2953 B221A07500 8 79 41 29 36 1,21 ■

7,60 .2992 B221A07600 8 79 41 29 36 1,23 ■

7,70 .3031 B221A07700 8 79 41 29 36 1,24 ■

7,80 .3071 B221A07800 8 79 41 29 36 1,26 ■

7,90 .3110 B221A07900 8 79 41 29 36 1,28 ■

8,00 .3150 B221A08000 8 79 41 29 36 1,29 ■

8,10 .3189 B221A08100 10 89 47 35 40 1,31 ■

8,20 .3228 B221A08200 10 89 47 35 40 1,32 ■

8,30 .3268 B221A08300 10 89 47 35 40 1,34 ■

8,40 .3307 B221A08400 10 89 47 35 40 1,36 ■

8,50 .3346 B221A08500 10 89 47 35 40 1,37 ■

8,60 .3386 B221A08600 10 89 47 35 40 1,39 ■

8,70 .3425 B221A08700 10 89 47 35 40 1,40 ■

8,80 .3465 B221A08800 10 89 47 35 40 1,42 ■

8,90 .3504 B221A08900 10 89 47 35 40 1,44 ■

9,00 .3543 B221A09000 10 89 47 35 40 1,45 ■

9,10 .3583 B221A09100 10 89 47 35 40 1,47 ■

9,20 .3622 B221A09200 10 89 47 35 40 1,48 ■

9,30 .3661 B221A09300 10 89 47 35 40 1,50 ■

gradeCS5

l5mm

l4mm

l3mm

l2mm

l1mm

d2mm

d1

mm decimal

catalog number

d1

≤ 3 0,002/0,012 6 0,000/-0,008>3 to 6 0,004/0,016 8 to 10 0,000/-0,009>6 to 10 0,006/0,021 12 to 18 0,000/-0,011>10 to 18 0,007/0,025 20 0,000/-0,013>18 to 21 0,008/0,029 — —

tolerances

tolerancem7

d2tolerance

h6

9,40 .3701 B221A09400 10 89 47 35 40 1,52 ■

9,50 .3740 B221A09500 10 89 47 35 40 1,53 ■

9,60 .3780 B221A09600 10 89 47 35 40 1,55 ■

9,70 .3819 B221A09700 10 89 47 35 40 1,57 ■

9,80 .3858 B221A09800 10 89 47 35 40 1,58 ■

9,90 .3898 B221A09900 10 89 47 35 40 1,60 ■

10,00 .3937 B221A10000 10 89 47 35 40 1,61 ■

10,10 .3976 B221A10100 12 102 55 40 45 1,63 ■

10,20 .4016 B221A10200 12 102 55 40 45 1,65 ■

10,30 .4055 B221A10300 12 102 55 40 45 1,66 ■

10,40 .4094 B221A10400 12 102 55 40 45 1,68 ■

10,50 .4134 B221A10500 12 102 55 40 45 1,69 ■

10,60 .4173 B221A10600 12 102 55 40 45 1,71 ■

10,70 .4213 B221A10700 12 102 55 40 45 1,73 ■

10,80 .4252 B221A10800 12 102 55 40 45 1,74 ■

10,90 .4291 B221A10900 12 102 55 40 45 1,76 ■

11,00 .4331 B221A11000 12 102 55 40 45 1,78 ■

11,10 .4370 B221A11100 12 102 55 40 45 1,79 ■

11,20 .4409 B221A11200 12 102 55 40 45 1,81 ■

11,30 .4449 B221A11300 12 102 55 40 45 1,82 ■

11,40 .4488 B221A11400 12 102 55 40 45 1,84 ■

11,50 .4528 B221A11500 12 102 55 40 45 1,86 ■

11,60 .4567 B221A11600 12 102 55 40 45 1,87 ■

11,70 .4606 B221A11700 12 102 55 40 45 1,89 ■

11,80 .4646 B221A11800 12 102 55 40 45 1,90 ■

11,90 .4685 B221A11900 12 102 55 40 45 1,92 ■

12,00 .4724 B221A12000 12 102 55 40 45 1,94 ■

12,10 .4764 B221A12100 14 107 60 43 45 1,95 ■

12,20 .4803 B221A12200 14 107 60 43 45 1,97 ■

12,30 .4843 B221A12300 14 107 60 43 45 1,99 ■

12,40 .4882 B221A12400 14 107 60 43 45 2,00 ■

12,50 .4921 B221A12500 14 107 60 43 45 2,02 ■

12,60 .4961 B221A12600 14 107 60 43 45 2,03 ■

228

B221 – metric

®High-Performance Solid Carbide DrillsDynapoint SE Drills without Coolant

gradeCS5

l5mm

l4mm

l3mm

l2mm

l1mm

d2mm

d1

mm decimal

catalog number

d1

≤ 3 0,002/0,012 6 0,000/-0,008>3 to 6 0,004/0,016 8 to 10 0,000/-0,009>6 to 10 0,006/0,021 12 to 18 0,000/-0,011>10 to 18 0,007/0,025 20 0,000/-0,013>18 to 21 0,008/0,029 — —

tolerances

tolerancem7

d2tolerance

h6

229229229

Dynapoint SE Drills without Coolant


l5grade

KC7215l4l3l2l1d2

sizedecimal mm

d1

new old

catalog number

K222 – inch

.1250 1/8 3,18 K222A01250 KSE01250 .1875 2.60 1.06 .843 1.44 .020 ■

.1563 5/32 3,97 K222A01563 KSE01563 .1875 2.60 1.06 .843 1.44 .025 ■

.1875 3/16 4,76 K222A01875 KSE01875 .1875 2.91 1.38 1.126 1.44 .030 ■

.2188 7/32 5,56 K222A02188 KSE02188 .2500 3.23 1.69 1.374 1.44 .035 ■

.2500 1/4, E 6,35 K222A02500 KSE02500 .2500 3.23 1.69 1.374 1.44 .040 ■

.2656 17/64 6,75 K222A02656 KSE02656 .3125 3.58 1.97 1.587 1.52 .043 ■

.2813 9/32 7,15 K222A02813 KSE02813 .3125 3.58 1.97 1.587 1.52 .045 ■

.2969 19/64 7,54 K222A02969 KSE02969 .3125 3.58 1.97 1.587 1.52 .048 ■

.3125 5/16 7,94 K222A03125 KSE03125 .3125 3.58 1.97 1.587 1.52 .050 ■

.3281 21/64 8,33 K222A03281 KSE03281 .3750 4.06 2.36 1.917 1.59 .053 ■

.3438 11/32 8,73 K222A03438 KSE03438 .3750 4.06 2.36 1.917 1.59 .056 ■

.3594 23/64 9,13 K222A03594 KSE03594 .3750 4.06 2.36 1.917 1.59 .058 ■

.3750 3/8 9,53 K222A03750 KSE03750 .3750 4.06 2.36 1.917 1.59 .061 ■

.3906 25/64 9,92 K222A03906 KSE03906 .4375 4.37 2.60 2.091 1.67 .063 ■

.4063 13/32 10,32 K222A04063 KSE04063 .4375 4.37 2.60 2.091 1.67 .066 ■

.4219 27/64 10,72 K222A04219 KSE04219 .4375 4.37 2.60 2.091 1.67 .068 ■

.4375 7/16 11,11 K222A04375 KSE04375 .4375 4.37 2.60 2.091 1.67 .071 ■

.4531 29/64 11,51 K222A04531 KSE04531 .5000 4.65 2.76 2.189 1.79 .073 ■

.4688 15/32 11,91 K222A04688 KSE04688 .5000 4.65 2.76 2.189 1.79 .076 ■

.4844 31/64 12,30 K222A04844 KSE04844 .5000 4.65 2.76 2.189 1.79 .078 ■

.5000 1/2 12,70 K222A05000 KSE05000 .5000 4.65 2.76 2.189 1.79 .081 ■

d1

>.1181 to .2362 .0002/.0006 .1875 .0000/-.0003>.2362 to .3937 .0002/.0008 .2500 to .6875 .0000/-.0004>.3937 to .7087 .0003/.0010 .7500 .0000/-.0005>.7087 to .7500 .0003/.0011 — —

tolerances

tolerancem7

d2tolerance

h6

230

®General-Purpose Solid Carbide DrillsSeries CR100

l5gradeK600

l4l3l2l1d2

sizedecimal mm

d1

new old

catalog number

.0469 3/64 1,19 KWCD00337 40513900337 .0469 1.51 .33 .191 1.19 .014 ■

.0625 1/16 1,59 KWCD00338 40513900338 .0625 1.52 .77 .638 .75 .019 ■

.0781 5/64 1,98 KWCD00339 40513900339 .0781 1.77 .77 .647 1.00 .023 ■

.0938 3/32 2,38 KWCD00340 40513900340 .0938 2.03 .90 .781 1.13 .028 ■

.1094 7/64 2,78 KWCD00341 40513900341 .1094 2.28 1.03 .916 1.25 .033 ■

.1250 1/8 3,18 KWCD00342 40513900342 .1250 2.29 1.29 1.175 1.00 .038 ■

.1406 9/64 3,57 KWCD00343 40513900343 .1406 2.54 1.29 1.184 1.25 .042 ■

.1563 5/32 3,97 KWCD00344 40513900344 .1563 2.55 1.42 1.319 1.12 .047 ■

.1719 11/64 4,37 KWCD00345 40513900345 .1719 2.80 1.43 1.328 1.37 .052 ■

.1875 3/16 4,76 KWCD00346 40513900346 .1875 2.81 1.68 1.588 1.12 .056 ■

.2031 13/64 5,16 KWCD00347 40513900347 .2031 3.06 1.69 1.597 1.37 .061 ■

.2188 7/32 5,56 KWCD00348 40513900348 .2188 3.07 1.82 1.731 1.25 .066 ■

.2344 15/64 5,95 KWCD00349 40513900349 .2344 3.32 1.82 1.741 1.50 .070 ■

.2500 1/4 6,35 KWCD00350 40513900350 .2500 3.33 2.08 2.000 1.25 .075 ■

• 118° point angle• 20° helix• Jobber length for general purpose applications• recommended for steel, cast iron, non-ferrous,

plastics, and other abrasive materials


K600 composition: An uncoated 10% cobalt, fine-grain carbide.application: Ideal for general purpose drilling of all materials.

Grade Description

231231231

Series CR100

General-Purpose Solid Carbide Drills

l5gradeK600

l4l3l2l1d2

sizedecimal mm

d1

new old

catalog number

.0400 #60 1,02 KWCD00387 40513900387 .0400 1.51 3.01 2.874 1.50 .012 ■

.0410 #59 1,04 KWCD00388 40513900388 .0410 1.51 .76 .625 .75 .012 ■

.0420 #58 1,07 KWCD00389 40513900389 .0420 1.51 .76 .625 .75 .013 ■

.0430 #57 1,09 KWCD00390 40513900390 .0430 1.51 .76 .626 .75 .013 ■

.0465 #56 1,18 KWCD00391 40513900391 .0465 1.51 .76 .628 .75 .014 ■

.0520 #55 1,32 KWCD00392 40513900392 .0520 1.52 .77 .631 .75 .016 ■

.0550 #54 1,40 KWCD00393 40513900393 .0550 1.52 .77 .633 .75 .017 ■

.0595 #53 1,51 KWCD00394 40513900394 .0595 1.52 .77 .636 .75 .018 ■

.0635 #52 1,61 KWCD00395 40513900395 .0635 1.52 .77 .638 .75 .019 ■

.0670 #51 1,70 KWCD00396 40513900396 .0670 1.52 .77 .640 .75 .020 ■

.0700 #50 1,78 KWCD00397 40513900397 .0700 1.77 .90 .767 .87 .021 ■

.0730 #49 1,85 KWCD00398 40513900398 .0730 1.77 .90 .769 .87 .022 ■

.0760 #48 1,93 KWCD00399 40513900399 .0760 1.77 .90 .771 .87 .023 ■

.0785 #47 1,99 KWCD00400 40513900400 .0785 1.77 .90 .772 .88 .024 ■

.0810 #46 2,06 KWCD00401 40513900401 .0810 1.77 .90 .774 .87 .024 ■

.0820 #45 2,08 KWCD00402 40513900402 .0820 1.77 1.02 .899 .75 .025 ■

.0860 #44 2,18 KWCD00403 40513900403 .0860 2.03 1.03 .902 1.00 .026 ■

.0890 #43 2,26 KWCD00404 40513900404 .0890 2.03 1.03 .903 1.00 .027 ■

.0935 #42 2,37 KWCD00405 40513900405 .0935 2.03 1.03 .906 1.00 .028 ■

.0960 #41 2,44 KWCD00406 40513900406 .0960 2.03 1.03 .908 1.00 .029 ■

.0980 #40 2,49 KWCD00407 40513900407 .0980 2.03 1.03 .909 1.00 .029 ■

.0995 #39 2,53 KWCD00408 40513900408 .0995 2.28 1.28 1.160 1.00 .030 ■

.1015 #38 2,58 KWCD00409 40513900409 .1015 2.28 1.28 1.161 1.00 .030 ■

.1040 #37 2,64 KWCD00410 40513900410 .1040 2.28 1.28 1.162 1.00 .031 ■

.1065 #36 2,71 KWCD00411 40513900411 .1065 2.28 1.28 1.164 1.00 .032 ■

.1100 #35 2,79 KWCD00412 40513900412 .1100 2.28 1.28 1.166 1.00 .033 ■

.1110 #34 2,82 KWCD00413 40513900413 .1110 2.28 1.28 1.167 1.00 .033 ■

.1130 #33 2,87 KWCD00414 40513900414 .1130 2.28 1.28 1.168 1.00 .034 ■

.1160 #32 2,95 KWCD00415 40513900415 .1160 2.28 1.28 1.170 1.00 .035 ■

.1200 #31 3,05 KWCD00416 40513900416 .1200 2.29 1.29 1.172 1.00 .036 ■





232

®General-Purpose Solid Carbide DrillsSeries CR100

l5gradeK600

l4l3l2l1d2

sizedecimal mm

d1

new old

catalog number

.1285 #30 3,26 KWCD00417 40513900417 .1285 2.29 1.29 1.177 1.00 .039 ■

.1360 #29 3,45 KWCD00418 40513900418 .1360 2.54 1.42 1.307 1.13 .041 ■

.1405 #28 3,57 KWCD00419 40513900419 .1405 2.54 1.42 1.309 1.12 .042 ■

.1440 #27 3,66 KWCD00420 40513900420 .1440 2.54 1.42 1.312 1.13 .043 ■

.1470 #26 3,73 KWCD00421 40513900421 .1470 2.54 1.42 1.313 1.13 .044 ■

.1495 #25 3,80 KWCD00422 40513900422 .1495 2.54 1.42 1.315 1.12 .045 ■

.1520 #24 3,86 KWCD00423 40513900423 .1520 2.55 1.42 1.316 1.13 .046 ■

.1540 #23 3,91 KWCD00424 40513900424 .1540 2.55 1.42 1.318 1.13 .046 ■

.1570 #22 3,99 KWCD00425 40513900425 .1570 2.55 1.42 1.319 1.13 .047 ■

.1590 #21 4,04 KWCD00426 40513900426 .1590 2.55 1.42 1.321 1.13 .048 ■

.1610 #20 4,09 KWCD00427 40513900427 .1610 2.55 1.42 1.322 1.13 .048 ■

.1660 #19 4,22 KWCD00428 40513900428 .1660 2.80 1.67 1.575 1.13 .050 ■

.1695 #18 4,31 KWCD00429 40513900429 .1695 2.80 1.68 1.577 1.12 .051 ■

.1730 #17 4,39 KWCD00430 40513900430 .1730 2.80 1.68 1.579 1.13 .052 ■

.1770 #16 4,50 KWCD00431 40513900431 .1770 2.80 1.68 1.581 1.13 .053 ■

.1800 #15 4,57 KWCD00432 40513900432 .1800 2.80 1.68 1.583 1.13 .054 ■

.1820 #14 4,62 KWCD00433 40513900433 .1820 2.80 1.68 1.584 1.13 .055 ■

.1850 #13 4,70 KWCD00434 40513900434 .1850 2.81 1.68 1.586 1.13 .056 ■

.1890 #12 4,80 KWCD00435 40513900435 .1890 2.81 1.68 1.589 1.13 .057 ■

.1910 #11 4,85 KWCD00436 40513900436 .1910 2.81 1.68 1.590 1.13 .057 ■

.1935 #10 4,91 KWCD00437 40513900437 .1935 2.81 1.68 1.591 1.12 .058 ■

.1960 #9 4,98 KWCD00438 40513900438 .1960 3.06 1.81 1.718 1.25 .059 ■

.1990 #8 5,05 KWCD00439 40513900439 .1990 3.06 1.81 1.720 1.25 .060 ■

.2010 #7 5,11 KWCD00440 40513900440 .2010 3.06 1.81 1.721 1.25 .060 ■

.2040 #6 5,18 KWCD00441 40513900441 .2040 3.06 1.81 1.723 1.25 .061 ■

.2055 #5 5,22 KWCD00442 40513900442 .2055 3.06 1.81 1.723 1.25 .062 ■

.2090 #4 5,31 KWCD00443 40513900443 .2090 3.06 1.81 1.726 1.25 .063 ■

.2130 #3 5,41 KWCD00444 40513900444 .2130 3.06 1.81 1.728 1.25 .064 ■

.2210 #2 5,61 KWCD00445 40513900445 .2210 3.07 1.82 1.733 1.25 .066 ■

.2280 #1 5,79 KWCD00446 40513900446 .2280 3.07 1.82 1.737 1.25 .068 ■

233233233

Series CH110


• 118° point angle• fast spiral• Jobber length for general purpose applications• recommended for softer ferrous and non-ferrous

materials that produce stringy chips

l5gradeK600

l4l3l2l1d2

sizedecimal mm

d1

new old

catalog number

.0469 3/64 1,19 KWCD00448 40513900448 .0469 1.51 .33 .191 1.19 .014 ■

.0625 1/16 1,59 KWCD00449 40513900449 .0625 1.52 .77 .638 .75 .019 ■

.0781 5/64 1,98 KWCD00450 40513900450 .0781 1.77 .77 .647 1.00 .023 ■

.0938 3/32 2,38 KWCD00451 40513900451 .0938 2.03 .90 .781 1.13 .028 ■

.1094 7/64 2,78 KWCD00452 40513900452 .1094 2.28 1.03 .916 1.25 .033 ■

.1250 1/8 3,18 KWCD00453 40513900453 .1250 2.29 1.29 1.175 1.00 .038 ■

.1406 9/64 3,57 KWCD00454 40513900454 .1406 2.54 1.29 1.184 1.25 .042 ■

.1563 5/32 3,97 KWCD00455 40513900455 .1563 2.55 1.42 1.319 1.12 .047 ■

.1719 11/64 4,37 KWCD00456 40513900456 .1719 2.80 1.43 1.328 1.37 .052 ■

.1875 3/16 4,76 KWCD00457 40513900457 .1875 2.81 1.68 1.588 1.12 .056 ■

.2031 13/64 5,16 KWCD00458 40513900458 .2031 3.06 1.69 1.597 1.37 .061 ■

.2188 7/32 5,56 KWCD00459 40513900459 .2188 3.07 1.82 1.731 1.25 .066 ■

.2344 15/64 5,95 KWCD00460 40513900460 .2344 3.32 1.82 1.741 1.50 .070 ■

.2500 1/4 6,35 KWCD00461 40513900461 .2500 3.33 2.08 2.000 1.25 .075 ■

234

®General-Purpose Solid Carbide DrillsSeries CH110



l5gradeK600

l4l3l2l1d2

sizedecimal mm

d1

new old

catalog number

.0400 #60 1,02 KWCD00498 40513900498 .0400 1.51 3.01 2.874 1.50 .012 ■

.0410 #59 1,04 KWCD00499 40513900499 .0410 1.51 .76 .625 .75 .012 ■

.0420 #58 1,07 KWCD00500 40513900500 .0420 1.51 .76 .625 .75 .013 ■

.0430 #57 1,09 KWCD00501 40513900501 .0430 1.51 .76 .626 .75 .013 ■

.0465 #56 1,18 KWCD00502 40513900502 .0465 1.51 .76 .628 .75 .014 ■

.0520 #55 1,32 KWCD00503 40513900503 .0520 1.52 .77 .631 .75 .016 ■

.0550 #54 1,40 KWCD00504 40513900504 .0550 1.52 .77 .633 .75 .017 ■

.0595 #53 1,51 KWCD00505 40513900505 .0595 1.52 .77 .636 .75 .018 ■

.0635 #52 1,61 KWCD00506 40513900506 .0635 1.52 .77 .638 .75 .019 ■

.0670 #51 1,70 KWCD00507 40513900507 .0670 1.52 .77 .640 .75 .020 ■

.0700 #50 1,78 KWCD00508 40513900508 .0700 1.77 .90 .767 .87 .021 ■

.0730 #49 1,85 KWCD00509 40513900509 .0730 1.77 .90 .769 .87 .022 ■

.0760 #48 1,93 KWCD00510 40513900510 .0760 1.77 .90 .771 .87 .023 ■

.0785 #47 1,99 KWCD00511 40513900511 .0785 1.77 .90 .772 .88 .024 ■

.0810 #46 2,06 KWCD00512 40513900512 .0810 1.77 .90 .774 .87 .024 ■

.0820 #45 2,08 KWCD00513 40513900513 .0820 1.77 1.02 .899 .75 .025 ■

.0860 #44 2,18 KWCD00514 40513900514 .0860 2.03 1.03 .902 1.00 .026 ■

.0890 #43 2,26 KWCD00515 40513900515 .0890 2.03 1.03 .903 1.00 .027 ■

.0935 #42 2,37 KWCD00516 40513900516 .0935 2.03 1.03 .906 1.00 .028 ■

.0960 #41 2,44 KWCD00517 40513900517 .0960 2.03 1.03 .908 1.00 .029 ■

.0980 #40 2,49 KWCD00518 40513900518 .0980 2.03 1.03 .909 1.00 .029 ■

.0995 #39 2,53 KWCD00519 40513900519 .0995 2.28 1.28 1.160 1.00 .030 ■

.1015 #38 2,58 KWCD00520 40513900520 .1015 2.28 1.28 1.161 1.00 .030 ■

.1040 #37 2,64 KWCD00521 40513900521 .1040 2.28 1.28 1.162 1.00 .031 ■

.1065 #36 2,71 KWCD00522 40513900522 .1065 2.28 1.28 1.164 1.00 .032 ■

.1100 #35 2,79 KWCD00523 40513900523 .1100 2.28 1.28 1.166 1.00 .033 ■

.1110 #34 2,82 KWCD00524 40513900524 .1110 2.28 1.28 1.167 1.00 .033 ■

.1130 #33 2,87 KWCD00525 40513900525 .1130 2.28 1.28 1.168 1.00 .034 ■

.1160 #32 2,95 KWCD00526 40513900526 .1160 2.28 1.28 1.170 1.00 .035 ■

.1200 #31 3,05 KWCD00527 40513900527 .1200 2.29 1.29 1.172 1.00 .036 ■

235235235

Series CH110




l5gradeK600

l4l3l2l1d2

sizedecimal mm

d1

new old

catalog number

.1285 #30 3,26 KWCD00528 40513900528 .1285 2.29 1.29 1.177 1.00 .039 ■

.1360 #29 3,45 KWCD00529 40513900529 .1360 2.54 1.42 1.307 1.13 .041 ■

.1405 #28 3,57 KWCD00530 40513900530 .1405 2.54 1.42 1.309 1.12 .042 ■

.1440 #27 3,66 KWCD00531 40513900531 .1440 2.54 1.42 1.312 1.13 .043 ■

.1470 #26 3,73 KWCD00532 40513900532 .1470 2.54 1.42 1.313 1.13 .044 ■

.1495 #25 3,80 KWCD00533 40513900533 .1495 2.54 1.42 1.315 1.12 .045 ■

.1520 #24 3,86 KWCD00534 40513900534 .1520 2.55 1.42 1.316 1.13 .046 ■

.1540 #23 3,91 KWCD00535 40513900535 .1540 2.55 1.42 1.318 1.13 .046 ■

.1570 #22 3,99 KWCD00536 40513900536 .1570 2.55 1.42 1.319 1.13 .047 ■

.1590 #21 4,04 KWCD00537 40513900537 .1590 2.55 1.42 1.321 1.13 .048 ■

.1610 #20 4,09 KWCD00538 40513900538 .1610 2.55 1.42 1.322 1.13 .048 ■

.1660 #19 4,22 KWCD00539 40513900539 .1660 2.80 1.67 1.575 1.13 .050 ■

.1695 #18 4,31 KWCD00540 40513900540 .1695 2.80 1.68 1.577 1.12 .051 ■

.1730 #17 4,39 KWCD00541 40513900541 .1730 2.80 1.68 1.579 1.13 .052 ■

.1770 #16 4,50 KWCD00542 40513900542 .1770 2.80 1.68 1.581 1.13 .053 ■

.1800 #15 4,57 KWCD00543 40513900543 .1800 2.80 1.68 1.583 1.13 .054 ■

.1820 #14 4,62 KWCD00544 40513900544 .1820 2.80 1.68 1.584 1.13 .055 ■

.1850 #13 4,70 KWCD00545 40513900545 .1850 2.81 1.68 1.586 1.13 .056 ■

.1890 #12 4,80 KWCD00546 40513900546 .1890 2.81 1.68 1.589 1.13 .057 ■

.1910 #11 4,85 KWCD00547 40513900547 .1910 2.81 1.68 1.590 1.13 .057 ■

.1935 #10 4,91 KWCD00548 40513900548 .1935 2.81 1.68 1.591 1.12 .058 ■

.1960 #9 4,98 KWCD00549 40513900549 .1960 3.06 1.81 1.718 1.25 .059 ■

.1990 #8 5,05 KWCD00550 40513900550 .1990 3.06 1.81 1.720 1.25 .060 ■

.2010 #7 5,11 KWCD00551 40513900551 .2010 3.06 1.81 1.721 1.25 .060 ■

.2040 #6 5,18 KWCD00552 40513900552 .2040 3.06 1.81 1.723 1.25 .061 ■

.2055 #5 5,22 KWCD00553 40513900553 .2055 3.06 1.81 1.723 1.25 .062 ■

.2090 #4 5,31 KWCD00554 40513900554 .2090 3.06 1.81 1.726 1.25 .063 ■

.2130 #3 5,41 KWCD00555 40513900555 .2130 3.06 1.81 1.728 1.25 .064 ■

.2210 #2 5,61 KWCD00556 40513900556 .2210 3.07 1.82 1.733 1.25 .066 ■

.2280 #1 5,79 KWCD00557 40513900557 .2280 3.07 1.82 1.737 1.25 .068 ■

236

®General-Purpose Solid Carbide DrillsSeries CS120

• 135° straight flute• recommended for hole depths of 2x to 3x diameter• excellent hole quality• recommended for stainless steels, hardened materials,

and abrasive materials

l5gradeK600

l4l3l2l1d2

sizedecimal mm

d1

new old

catalog number

fractional drills.0469 3/64 1,19 KWCD00558 40513900558 .0469 1.50 .50 .103 1.00 .010 ■

.0625 1/16 1,59 KWCD00559 40513900559 .0625 1.50 .63 .138 .88 .013 ■

.0781 5/64 1,98 KWCD00560 40513900560 .0781 1.69 .69 .172 1.00 .016 ■

.0938 3/32 2,38 KWCD00561 40513900561 .0938 1.75 .75 .207 1.00 .019 ■

.1094 7/64 2,78 KWCD00562 40513900562 .1094 1.81 .81 .241 1.00 .023 ■

.1250 1/8 3,18 KWCD00563 40513900563 .1250 1.88 .88 .276 1.00 .026 ■

.1406 9/64 3,57 KWCD00564 40513900564 .1406 1.94 .94 .310 1.00 .029 ■

.1563 5/32 3,97 KWCD00565 40513900565 .1563 2.06 1.00 .345 1.06 .032 ■

.1719 11/64 4,37 KWCD00566 40513900566 .1719 2.13 1.06 .379 1.06 .036 ■

.1875 3/16 4,76 KWCD00567 40513900567 .1875 2.19 1.13 .414 1.06 .039 ■

.2031 13/64 5,16 KWCD00568 40513900568 .2031 2.25 1.19 .448 1.06 .042 ■

.2188 7/32 5,56 KWCD00569 40513900569 .2188 2.38 1.25 .483 1.13 .045 ■

.2344 15/64 5,95 KWCD00570 40513900570 .2344 2.44 1.31 .517 1.13 .049 ■

.2500 1/4 6,35 KWCD00571 40513900571 .2500 2.50 1.38 .552 1.13 .052 ■

number drills.0400 #60 1,02 KWCD00588 40513900588 .0400 1.50 .50 .088 1.00 .008 ■

.0410 #59 1,04 KWCD00589 40513900589 .0410 1.50 .50 .090 1.00 .008 ■

.0420 #58 1,07 KWCD00590 40513900590 .0420 1.50 .50 .093 1.00 .009 ■

.0430 #57 1,09 KWCD00591 40513900591 .0430 1.50 .50 .095 1.00 .009 ■

.0465 #56 1,18 KWCD00592 40513900592 .0465 1.50 .50 .103 1.00 .010 ■

.0520 #55 1,32 KWCD00593 40513900593 .0520 1.50 .50 .115 1.00 .011 ■

.0550 #54 1,40 KWCD00594 40513900594 .0550 1.50 .50 .121 1.00 .011 ■

.0595 #53 1,51 KWCD00595 40513900595 .0595 1.50 .50 .131 1.00 .012 ■

.0635 #52 1,61 KWCD00596 40513900596 .0635 1.69 .69 .140 1.00 .013 ■

.0670 #51 1,70 KWCD00597 40513900597 .0670 1.69 .69 .148 1.00 .014 ■

.0700 #50 1,78 KWCD00598 40513900598 .0700 1.69 .69 .154 1.00 .014 ■

.0730 #49 1,85 KWCD00599 40513900599 .0730 1.69 .69 .161 1.00 .015 ■

.0760 #48 1,93 KWCD00600 40513900600 .0760 1.69 .69 .168 1.00 .016 ■

.0785 #47 1,99 KWCD00601 40513900601 .0785 1.75 .75 .173 1.00 .016 ■

.0810 #46 2,06 KWCD00602 40513900602 .0810 1.75 .75 .179 1.00 .017 ■

.0820 #45 2,08 KWCD00603 40513900603 .0820 1.75 .75 .181 1.00 .017 ■

.0860 #44 2,18 KWCD00604 40513900604 .0860 1.75 .75 .190 1.00 .018 ■

.0890 #43 2,26 KWCD00605 40513900605 .0890 1.75 .75 .196 1.00 .018 ■

.0935 #42 2,37 KWCD00606 40513900606 .0935 1.75 .75 .206 1.00 .019 ■

.0960 #41 2,44 KWCD00607 40513900607 .0960 1.81 .81 .212 1.00 .020 ■

.0980 #40 2,49 KWCD00608 40513900608 .0980 1.81 .81 .216 1.00 .020 ■

.0995 #39 2,53 KWCD00609 40513900609 .0995 1.81 .81 .220 1.00 .021 ■

.1015 #38 2,58 KWCD00610 40513900610 .1015 1.81 .81 .224 1.00 .021 ■

.1040 #37 2,64 KWCD00611 40513900611 .1040 1.81 .81 .230 1.00 .022 ■

.1065 #36 2,71 KWCD00612 40513900612 .1065 1.81 .81 .235 1.00 .022 ■

.1100 #35 2,79 KWCD00613 40513900613 .1100 1.88 .88 .243 1.00 .023 ■

.1110 #34 2,82 KWCD00614 40513900614 .1110 1.88 .88 .245 1.00 .023 ■

.1130 #33 2,87 KWCD00615 40513900615 .1130 1.88 .88 .249 1.00 .023 ■

.1160 #32 2,95 KWCD00616 40513900616 .1160 1.88 .88 .256 1.00 .024 ■

.1200 #31 3,05 KWCD00617 40513900617 .1200 1.88 .88 .265 1.00 .025 ■

237237237

Series CS120


• 135° straight flute• recommended for hole depths of 2x to 3x diameter• excellent hole quality• recommended for stainless steels, hardened materials,

and abrasive materials

l5gradeK600

l4l3l2l1d2

sizedecimal mm

d1

new old

catalog number

.1285 #30 3,26 KWCD00618 40513900618 .1285 1.94 .94 .284 1.00 .027 ■

.1360 #29 3,45 KWCD00619 40513900619 .1360 1.94 .94 .300 1.00 .028 ■

.1405 #28 3,57 KWCD00620 40513900620 .1405 1.94 .94 .310 1.00 .029 ■

.1440 #27 3,66 KWCD00621 40513900621 .1440 2.06 1.00 .318 1.06 .030 ■

.1470 #26 3,73 KWCD00622 40513900622 .1470 2.06 1.00 .324 1.06 .030 ■

.1495 #25 3,80 KWCD00623 40513900623 .1495 2.06 1.00 .330 1.06 .031 ■

.1520 #24 3,86 KWCD00624 40513900624 .1520 2.06 1.00 .335 1.06 .031 ■

.1540 #23 3,91 KWCD00625 40513900625 .1540 2.06 1.00 .340 1.06 .032 ■

.1570 #22 3,99 KWCD00626 40513900626 .1570 2.13 1.06 .347 1.06 .033 ■

.1590 #21 4,04 KWCD00627 40513900627 .1590 2.13 1.06 .351 1.06 .033 ■

.1610 #20 4,09 KWCD00628 40513900628 .1610 2.13 1.06 .355 1.06 .033 ■

.1660 #19 4,22 KWCD00629 40513900629 .1660 2.13 1.06 .366 1.06 .034 ■

.1695 #18 4,31 KWCD00630 40513900630 .1695 2.13 1.06 .374 1.06 .035 ■

.1730 #17 4,39 KWCD00631 40513900631 .1730 2.19 1.13 .382 1.06 .036 ■

.1770 #16 4,50 KWCD00632 40513900632 .1770 2.19 1.13 .391 1.06 .037 ■

.1800 #15 4,57 KWCD00633 40513900633 .1800 2.19 1.13 .397 1.06 .037 ■

.1820 #14 4,62 KWCD00634 40513900634 .1820 2.19 1.13 .402 1.06 .038 ■

.1850 #13 4,70 KWCD00635 40513900635 .1850 2.19 1.13 .408 1.06 .038 ■

.1890 #12 4,80 KWCD00636 40513900636 .1890 2.19 1.13 .417 1.06 .039 ■

.1910 #11 4,85 KWCD00637 40513900637 .1910 2.19 1.13 .422 1.06 .040 ■

.1935 #10 4,91 KWCD00638 40513900638 .1935 2.19 1.13 .427 1.06 .040 ■

.1960 #9 4,98 KWCD00639 40513900639 .1960 2.25 1.19 .433 1.06 .041 ■

.1990 #8 5,05 KWCD00640 40513900640 .1990 2.25 1.19 .439 1.06 .041 ■

.2010 #7 5,11 KWCD00641 40513900641 .2010 2.25 1.19 .444 1.06 .042 ■

.2040 #6 5,18 KWCD00642 40513900642 .2040 2.38 1.25 .450 1.13 .042 ■

.2055 #5 5,22 KWCD00643 40513900643 .2055 2.38 1.25 .454 1.13 .043 ■

.2090 #4 5,31 KWCD00644 40513900644 .2090 2.38 1.25 .461 1.13 .043 ■

.2130 #3 5,41 KWCD00645 40513900645 .2130 2.38 1.25 .470 1.13 .044 ■

.2210 #2 5,61 KWCD00646 40513900646 .2210 2.44 1.31 .488 1.13 .046 ■

.2280 #1 5,79 KWCD00647 40513900647 .2280 2.44 1.31 .503 1.13 .047 ■

238

®General-Purpose Solid Carbide DrillsSeries CN130

• 118° included point angle• used for spot drilling and very shallow holes• recommended for thin material thickness

Combined Drill and Countersink

• 118° point angle• 60° included angle• used in high-production environments requiring

tool strength• recommended for most materials

l5gradeK600

l4l3l2l1d2

sizedecimal mm

d1

new old

catalog number

l5gradeK600

l4l3l2l1d2

sizedecimal mm

d1

catalog number

.0313 1/32 0,79 KWCD00648 40513900648 .0313 1.25 .19 .063 1.06 .009 ■

.0625 1/16 1,59 KWCD00649 40513900649 .0625 1.50 .31 .125 1.19 .019 ■

.0938 3/32 2,38 KWCD00650 40513900650 .0938 1.50 .38 .188 1.13 .028 ■

.1250 1/8 3,18 KWCD00651 40513900651 .1250 1.50 .44 .250 1.06 .038 ■

.1563 5/32 3,97 KWCD00652 40513900652 .1563 2.00 .47 .313 1.53 .047 ■

.1875 3/16 4,76 KWCD00653 40513900653 .1875 2.00 .56 .375 1.44 .056 ■

.2188 7/32 5,56 KWCD00654 40513900654 .2188 2.00 .59 .438 1.41 .066 ■

.2500 1/4 6,35 KWCD00655 40513900655 .2500 2.00 .69 .500 1.31 .075 ■

.3125 5/16 7,94 KWCD00657 40513900657 .3125 2.50 .88 .625 1.63 .094 ■

.3438 11/32 8,73 KWCD00658 40513900658 .3438 2.50 .94 .688 .156 .103 ■

.3750 3/8 9,53 KWCD00659 40513900659 .3750 2.50 1.00 .750 1.50 .113 ■

.4375 7/16 11,11 KWCD00661 40513900661 .4375 2.50 1.06 .875 1.44 .131 ■

.5000 1/2 12,70 KWCD00663 40513900663 .5000 2.50 1.13 1.000 1.38 .150 ■

.0469 3/64 1,19 CDC094DS1 .1250 1.50 .38 .075 1.13 .028 ■

.0781 5/64 1,98 CDC078DS1 .1875 2.00 .50 .106 1.50 .047 ■

.1094 7/64 2,78 CDC109DS1 .2500 2.00 .69 .138 1.31 .066 ■

.1250 1/8 3,18 CDC125DS1 .3125 2.13 .75 .153 1.38 .075 ■

.1875 3/16 4,76 CDC188DS1 .4375 2.75 1.00 .216 1.75 .113 ■

.2188 7/32 5,56 CDC218DS1 .5000 3.00 1.06 .247 1.94 .131 ■

239

page

High-Performance Taps

K-SS . . . . . . . . . . . . . . . . . . . . . . . 240-245

K-SS spiral point plug . . . . . . . . . . . . . . . . . . 240K-SS spiral flute, modified bottom . . . . . . . . . 242K-SS spiral flute, full bottom . . . . . . . . . . . . . . . 244K-SS spiral flute pipe . . . . . . . . . . . . . . . . . . . . . . 245

K-NI 246-248

K-NI spiral point plug . . . . . . . . . . . . . . . . . . . . . . . . . 246K-NI spiral flute, modified bottom . . . . . . . . . . . . . . . 247K-NI spiral flute, full bottom . . . . . . . . . . . . . . . . . . . . . 248

K-NI STI (for screw thread inserts). . . . . . 249-251

K-NI STI spiral point plug . . . . . . . . . . . . . . . . . . . . . . . . . 249K-NI STI spiral flute, modified bottom . . . . . . . . . . . . . . . 250K-NI STI spiral flute, full bottom . . . . . . . . . . . . . . . . . . . . 251

K-MS Mold Taps. . . . . . . . . . . . . . . . . . . . . . . 252

K-AA Straight Flute Taps . . . . . . . . . . . . . . . . 253-254

K-TI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255-257

K-TI LHS/RHC spiral flute plug. . . . . . . . . . . . . . . . . . . . . . . 255K-TI RH spiral flute, modified bottom . . . . . . . . . . . . . . . . . 256K-TI RH spiral flute, full bottom . . . . . . . . . . . . . . . . . . . . . . 257

Decimal Equivalent Chart. . . . . . . . . . . . . . . . 258



800/835-3668

240

®High-Performance TapsK-SS Spiral Point Plug

M3 x 0,5 3 D3 .374 .251 1 15/16 40510200238M3.5 x 0,6 3 D4 .413 .274 2 40510200239M4 x 0,7 3 D4 .453 .297 2 1/8 40510200240M5 x 0,8 3 D4 .531 .344 2 3/8 40510200241M6 x 1 3 D5 .591 .409 2 1/2 40510200242

UIC #overall lengthlength of necklength of thread*pitch diameter limittap size and pitch

(mm)

2 56 — 2 .256 .181 1 3/4 40510200001 40510200002 40510200003 — — — 3 48 — 2 .295 .205 1 13/16 40510200004 — — — — —4 40 — 2 .335 .227 1 7/8 40510200005 40510200006 40510200007 40510200008 40510200009 —4 — 48 2 .335 .227 1 7/8 40510200010 — 40510200011 — — —5 40 — 3 .374 .251 1 15/16 40510200012 — — — — —

6 32 — 3 .413 .274 2 40510200013 40510200014 40510200015 40510200016 40510200017 405102000186 — 40 3 .413 .274 2 40510200019 40510200020 — — — —8 32 — 3 .453 .297 2 1/8 40510200021 40510200022 40510200023 40510200024 40510200025 405102000268 — 36 3 .453 .297 2 1/8 40510200027 — — — — —

10 24 — 3 .531 .344 2 3/8 — 40510200028 40510200029 40510200030 40510200031 4051020003210 — 32 3 .531 .344 2 3/8 40510200033 40510200034 40510200035 40510200036 40510200037 4051020003812 24 — 3 .571 .366 2 3/8 — 40510200039 — — — —12 — 28 3 .571 .366 2 3/8 — 40510200040 — — — —

1/4 20 — 3 .591 .409 2 1/2 40510200041 40510200042 — 40510200043 — 405102000441/4 — 28 3 .591 .409 2 1/2 40510200045 40510200046 40510200047 40510200048 40510200049 405102000505/16 18 — 3 .669 .456 2 23/32 — 40510200051 — 40510200052 — 405102000535/16 — 24 3 .669 .456 2 23/32 — 40510200054 40510200055 40510200056 40510200057 40510200058

3/8 16 — 3 .748 .502 2 15/16 — 40510200059 — 40510200060 — 405102000613/8 — 24 3 .748 .502 2 15/16 — 40510200062 40510200063 40510200064 40510200065 40510200066

UIC #pitch diameter limits

H2 H3 H4 H5 H6 H7

overalllength

tap size NC

UNCUNJC

NFUNF

UNJF

threads perinch

number of flutes

• high-vanadium premium steel• surface-treated oxide• for through-hole tapping• plug chamfer: 4-5 pitches• neck design for CNC equipment• suitable for UNJ aerospace internal threading applications

Recommended Applications:- low-carbon steels (<0.3% C) (<275 HB)- plain-carbon, alloy, and tool steels (<275 HB) (<29 HRC)- ferritic, martensitic, and PH stainless steels

(<275 HB) (<29 HRC)- austenitic stainless steels (135-275 HB) (<28 HRC)

For more technical information, see pages 680-702 of HolemakingCatalog 0070 (A00-2).

for through-hole tapping plug chamfer

Metric SizesM3 to M6 (12 per package)

Machine Screw and Fractional Sizes#2 to 1/4" (2 per package) • 5/16" to 3/8" (6 per package)

*Metric “D” limits suitable for ISO 6H tolerance class.NOTE: For dimensions other than those shown, see page 686 of Holemaking Catalog 0070 (A00-2).

NOTE: For dimensions other than those shown, see page 686 of Holemaking Catalog 0070 (A00-2).

length of

neck

length of

thread

numberof

flutes

241241241

K-SS Spiral Point Plug


• high-vanadium premium steel• TiN coated• for through-hole tapping• plug chamfer: 4-5 pitches• neck design for CNC equipment• suitable for UNJ aerospace internal threading applications





4 40 — 2 .335 .227 1 7/8 40510200729 — —5 40 — 3 .374 .251 1 15/16 40510200730 — —6 32 — 3 .413 .274 2 — 40510200731 —8 32 — 3 .453 .297 2 1/8 — 40510200732 —

10 24 — 3 .531 .344 2 3/8 — 40510200733 —10 — 32 3 .531 .344 2 3/8 — 40510200756 —1/4 20 — 3 .591 .409 2 1/2 — 40510200757 —1/4 — 28 3 .591 .456 2 1/2 — 40510200758 —

5/16 18 — 3 .669 .456 2 23/32 — 40510200759 —5/16 — 24 3 .669 .456 2 23/32 — 40510200760 —3/8 16 — 3 .748 .502 2 15/16 — 40510200761 —3/8 — 24 3 .748 .502 2 15/16 — 40510200762 —


H2 H3 H4

overall lengthlength

of neck

length of

thread

tap size NC

UNCUNJC

NFUNFUNJF

threads per inchnumber

of flutes




242

®High-Performance TapsK-SS Spiral Flute, Modified Bottom

• high-vanadium premium steel• surface-treated oxide• for blind-hole tapping• modified bottom chamfer: 2 1/2 - 3 1/2 pitches• neck design for CNC equipment• suitable for UNJ aerospace internal threading applications




for blind-hole tapping modified bottom chamfer



(mm)

2 56 — 2 .157 .280 1 3/4 40510200096 — — — — —3 48 — 2 .197 .303 1 13/16 40510200097 — — — — —4 40 — 2 .236 .326 1 7/8 40510200098 40510200100 40510200102 40510200103 40510200105 —4 — 48 2 .236 .326 1 7/8 40510200106 — — — — —5 40 — 3 .236 .389 2 40510200108 — — — — —6 32 — 3 .276 .411 2 40510200110 40510200112 40510200114 40510200115 — 405102001176 — 40 3 .276 .411 2 40510200118 40510200121 — — — —8 32 — 3 .276 .474 2 1/8 40510200123 40510200125 40510200127 40510200128 40510200130 4051020013110 24 — 3 .354 .521 2 3/8 40510200132 40510200133 40510200135 40510200136 — 4051020013810 — 32 3 .276 .599 2 3/8 40510200139 40510200140 40510200142 40510200143 40510200145 4051020014612 24 — 3 .354 .583 2 3/8 — 40510200147 — — — —12 — 28 3 .276 .661 2 3/8 — 40510200148 — — — —1/4 20 — 3 .433 .567 2 1/2 40510200149 40510200150 — 40510200152 — 405102001541/4 — 28 3 .354 .646 2 1/2 40510200155 40510200156 40510200158 40510200159 40510200161 405102001625/16 18 — 3 .472 .653 2 23/32 — 40510200163 — 40510200165 — 405102001675/16 — 24 3 .394 .731 2 23/32 — 40510200168 40510200170 40510200171 40510200173 405102001743/8 16 — 3 .551 .699 2 15/16 — 40510200175 — 40510200177 — 405102001793/8 — 24 3 .394 .856 2 15/16 — 40510200181 40510200183 40510200185 40510200187 40510200188


H2 H3 H4 H5 H6 H7

overalllength

length of

neck

length of

thread

tap size NC

UNCUNJC

NFUNF

UNJF

threads perinch

number of flutes

numberof

flutes




243243243

K-SS Spiral Flute, Modified Bottom



• high-vanadium premium steel• TiN coated• for blind-hole tapping• modified bottom chamfer: 2 1/2 - 3 1/2 pitches• neck design for CNC equipment• suitable for UNJ aerospace internal threading applications





4 40 — 2 .236 .326 1 7/8 40510200776 — —5 40 — 3 .236 .389 1 15/16 40510200777 — —6 32 — 3 .276 .411 2 — 40510200778 —8 32 — 3 .276 .411 2 1/8 — 40510200779 —10 24 — 3 .354 .521 2 3/8 — 40510200780 —10 — 32 3 .276 .599 2 3/8 — 40510200781 —1/4 20 — 3 .433 .567 2 1/2 — 40510200782 —1/4 — 28 3 .354 .646 2 1/2 — 40510200783 —5/16 18 — 3 .472 .653 2 23/32 — 40510200784 —5/16 — 24 3 .394 .731 2 23/32 — 40510200785 —3/8 16 — 3 .551 .699 2 15/16 — 40510200786 —3/8 – 24 3 .394 .856 2 15/16 — 40510200787 —


H2 H3 H4

overall lengthtap size NC

UNCUNJC

NFUNFUNJF

threads per inchlength

of neck

length of

thread

numberof

flutes



244

®High-Performance TapsK-SS Spiral Flute, Full Bottom

• high-vanadium premium steel• surface-treated oxide• for blind-hole tapping• full bottom chamfer: 1-2 pitches• neck design for CNC equipment• suitable for UNJ aerospace internal threading applications




for blind-hole tapping full bottom chamfer



(mm)

4 40 — 2 .236 .326 1 7/8 40510200099 40510200101 — 40510200104 — —4 — 48 2 .236 .326 1 7/8 40510200107 — — — — —5 40 — 3 .236 .389 2 40510200109 — — — — —6 32 — 3 .276 .411 2 40510200111 40510200113 — 40510200116 — —6 — 40 3 .276 .411 2 40510200119 40510200122 — — — —8 32 — 3 .276 .474 2 1/8 40510200124 40510200126 — 40510200129 — —

10 24 — 3 .354 .521 2 3/8 — 40510200134 — 40510200137 — —10 — 32 3 .276 .599 2 3/8 — 40510200141 — 40510200144 — —12 24 — 3 .354 .583 2 3/8 — — — — — —12 — 28 3 .276 .661 2 3/8 — — — — — —1/4 20 — 3 .433 .567 2 1/2 — 40510200151 — 40510200153 — —1/4 — 28 3 .354 .646 2 1/2 — 40510200157 — 40510200160 — —5/16 18 — 3 .472 .653 2 23/32 — 40510200164 — 40510200166 — —5/16 — 24 3 .394 .731 2 23/32 — 40510200169 — 40510200172 — —3/8 16 — 3 .551 .699 2 15/16 — 40510200176 — 40510200178 — 405102001803/8 — 24 3 .394 .856 2 15/16 — 40510200182 40510200184 40510200186 — —


H2 H3 H4 H5 H6 H7

overalllength

tap size NC

UNCUNJC

NFUNF

UNJF

threads perinch

number of flutes




length of

neck

length of

thread

numberof

flutes

245245245

K-SS Spiral Flute Pipe


Fractional Sizes1/16" to 1/4" (12 per package) • 3/8" (6 per package)

• high-vanadium premium steel• surface-treated oxide• NPT and NPTF pipe tap, Dry Seal taper• chamfer: 2 1/2 - 3 1/2 pitches




*The nominal size of a pipe tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4" per foot.**Large shank is .4375" diameter.NOTE: For dimensions other than those shown, see page 686 of Holemaking Catalog 0070 (A00-2).

UIC #

NPT NPTFoverall lengthlength of threadnominal size threads per inch number of flutes

1/16 27 NPT 4 11/16 2 1/8 40510200838 405102008551/8** 27 NPT 4 3/4 2 1/8 40510200839 405102008561/8 27 NPT 4 3/4 2 1/8 40510200840 405102008591/4 18 NPT 4 1 1/16 2 7/16 40510200841 40510200860

K-SS Spiral Flute PipeFractional Sizes1/16" to 1/4" (12 per package) • 3/8" (6 per package)

• high-vanadium premium steel• TiN coated• NPT and NPTF pipe tap, Dry Seal taper• chamfer: 2 1/2 - 3 1/2 pitches




UIC #

NPT NPTF

1/16 27 4 .688 2 1/8 40510200993 405102010011/8* 27 4 .750 2 1/8 40510200994 405102010021/8 27 4 .750 2 1/8 40510200995 405102010031/4 18 4 1.063 2 7/8 40510200996 40510201004

overall lengthlength of threadnominal size threads per inch number of flutes

*Large shank is .4375" diameter.NOTE: For dimensions other than those shown, see page 686 of Holemaking Catalog 0070 (A00-2).

246

®High-Performance TapsK-NI Spiral Point PlugMetric SizesM2,5 to M6 (12 per package)

• special cobalt, high-vanadium premium steel• surface-treated oxide over nitride• for through-hole tapping• plug chamfer: 4-5 pitches• neck design for CNC equipment• suitable for UNJ aerospace internal threading applications

Recommended Applications:- plain-carbon, alloy, and tool steels

(275-340 HB) (29-36 HRC)- ferritic, martensitic, and PH stainless steels

(275-340 HB) (29-36 HRC)- nickel-base, heat-resistant alloys

(140-475 HB) (≤ 48 HRC)For more technical information, see pages 680-702 of HolemakingCatalog 0070 (A00-2).


UIC #

M2.5 x 0,45 2 D3 .500 .500 1 13/16 40510201034M3 x 0,5 3 D3 .313 .625 1.9375 40510201035M3.5 x 0,6 3 D4 .375 .688 2 40510201036M4 x 0,7 3 D4 .375 .750 2.125 40510201037

M5 x 0,8 3 D4 .500 .875 2.375 40510201038M6 x 1 3 D5 .625 1.000 2.5 40510201039

overall lengthlength of necklength of threadtap size and pitch(mm) *pitch diameter limitnumber of flutes


2 56 — 2 .256 .181 1 3/4 40510200291 — — — — — 4 40 — 2 .335 .227 1 7/8 40510200292 40510200293 40510200294 — — —4 — 48 2 .335 .227 1 7/8 40510200295 — — — — —5 40 — 3 .374 .251 1 5/16 40510200296 — — — — —

6 32 — 3 .413 .274 2 40510200297 40510200298 — 40510200299 — 405102003006 — 40 3 .413 .274 2 40510200301 — — — — —8 32 — 3 .453 .297 2 1/8 40510200302 40510200303 40510200304 40510200305 40510200306 4051020030710 24 — 3 .531 .344 2 3/8 — 40510200308 40510200309 40510200310 — 4051020031110 — 32 3 .531 .344 2 3/8 40510200312 40510200313 40510200314 40510200315 40510200316 40510200317

1/4 20 — 3 .591 .409 2 1/2 — 40510200318 — 40510200319 — 405102003201/4 — 28 3 .591 .409 2 1/2 — 40510200321 40510200322 40510200323 40510200324 405102003255/16 18 — 3 .669 .456 2 23/32 — 40510200326 — 40510200327 — 405102003285/16 — 24 3 .669 .456 2 23/32 — 40510200329 40510200330 40510200331 40510200332 40510200333

3/8 16 — 3 .748 .502 2 15/16 — 40510200334 — 40510200335 — 405102003363/8 — 24 3 .748 .502 2 15/16 — 40510200337 40510200338 40510200339 40510200340 40510200341


H2 H3 H4 H5 H6 H7

overalllength

tap size NC

UNCUNJC

NFUNF

UNJF

threads perinch



length of

neck

length of

thread

numberof

flutes

247247247

K-NI Spiral Flute, Modified Bottom


Metric SizesM2,5 to M6 (12 per package)

UIC #

M2.5 x 0,45 2 D3 .500 .500 1 13/16 40510201060M3 x 0,5 3 D3 .313 .625 1 15/16 40510201061M3.5 x 0,6 3 D4 .375 .688 2 40510201062M4 x 0,7 3 D4 .375 .750 2 1/8 40510201063

M5 x 0,8 3 D4 .500 .875 2 3/8 40510201064M6 x 1 3 D5 .625 1.000 2 1/2 40510201065

overall lengthlength of necklength of threadtap size and pitch(mm) *pitch diameter limitnumber of flutes


2 56 — 3 .157 .280 1 3/4 40510200356 — — — — —3 48 3 .197 .303 1 13/16 40510200357 — — — — —4 40 — 3 .236 .326 1 7/8 40510200358 40510200361 40510200363 40510200364 — —4 — 48 3 .236 .326 1 7/8 40510200366 — — — — —5 40 — 3 .236 .389 1 15/16 40510200368 — — — — —

6 32 — 3 .276 .411 2 40510200370 40510200372 — 40510200374 — 405102003766 — 40 3 .276 .411 2 40510200377 — — — — —8 32 — 3 .276 .474 2 1/8 40510200379 40510200381 40510200383 40510200384 40510200386 4051020038710 24 — 3 .354 .521 2 3/8 — 40510200388 40510200390 40510200391 — 4051020039310 — 32 3 .276 .599 2 3/8 40510200394 40510200395 40510200397 40510200398 40510200400 40510200401

1/4 20 — 3 .433 .567 2 1/2 — 40510200402 — 40510200404 — 405102004061/4 — 28 3 .354 .646 2 1/2 — 40510200407 40510200409 40510200411 40510200413 405102004145/16 18 — 3 .472 .653 2 23/32 — 40510200415 — 40510200417 — 405102004195/16 — 24 3 .394 .731 2 23/32 — 40510200420 40510200422 40510200424 40510200426 40510200427

3/8 16 — 3 .551 .699 2 15/16 — 40510200428 — 40510200430 — 405102004323/8 — 24 3 .394 .856 2 15/16 — 40510200433 40510200435 40510200437 40510200439 40510200440


H2 H3 H4 H5 H6 H7

overalllength

tap size NC

UNCUNJC

NFUNF

UNJF

threads perinch



• special cobalt, high-vanadium premium steel• surface-treated oxide over nitride • for blind-hole tapping• modified bottom chamfer: 3-4 pitches• neck design for CNC equipment• suitable for UNJ aerospace internal threading applications






length of

neck

length of

thread

numberof

flutes

248

®High-Performance TapsK-NI Spiral Flute, Full BottomMachine Screw and Fractional Sizes#4 to 1/4" (12 per package) • 5/16" to 3/8" (6 per package)

• special cobalt, high-vanadium premium steel• surface-treated oxide over nitride• for blind-hole tapping• full bottom chamfer: 1-2 pitches • neck design for CNC equipment• suitable for UNJ internal threading aerospace applications






4 40 — 3 .236 .326 1 7/8 40510200359 40510200362 — 405102003654 — 48 3 .236 .326 1 7/8 40510200367 — — —5 40 — 3 .236 .389 1 15/16 40510200369 — — —

6 32 — 3 .276 .411 2 40510200371 40510200373 — 405102003756 — 40 3 .276 .411 2 40510200378 — — —8 32 — 3 .276 .474 2 1/8 40510200380 40510200382 — 40510200385

10 24 — 3 .354 .521 2 3/8 — 40510200389 — 4051020039210 — 32 3 .276 .599 2 3/8 — 40510200396 — 405102003991/4 20 — 3 .433 .567 2 1/2 — 40510200403 — 405102004051/4 — 28 3 .354 .646 2 1/2 — 40510200408 40510200410 40510200412

5/16 18 — 3 .472 .653 2 23/32 — 40510200416 — 405102004185/16 — 24 3 .394 .731 2 23/32 — 40510200421 40510200423 405102004253/8 16 — 3 .551 .699 2 15/16 — 40510200429 — 405102004313/8 — 24 3 .394 .856 2 15/16 — 40510200434 40510200436 40510200438


H2 H3 H4 H5

overall length

tap size NC

UNCUNJC

NFUNF

UNJF

threads perinch


length of

neck

length of

thread

numberof

flutes

249249249

K-NI STI Spiral Point Plug


Machine Screw and Fractional Sizes for Screw Thread Inserts#4 to 1/4" (12 per package) • 5/16" to 3/8" (6 per package)

• special cobalt, high-vanadium premium steel• surface-treated oxide over nitride• for through-hole tapping• plug chamfer: 4-5 pitches• neck design for CNC equipment• suitable for UNJ aerospace internal threading applications






4 40 — 2 .413 .274 2 40510200466 40510200467 40510200468 — —6 32 — 3 .531 .344 2 3/8 — 40510200469 40510200470 — 405102004718 32 — 3 .571 .366 2 3/8 — 40510200472 40510200473 — 40510200474

10 24 — 3 .591 .409 2 1/2 — 40510200475 40510200476 — 4051020047710 — 32 3 .591 .409 2 1/2 — 40510200478 40510200479 — 405102004801/4 20 — 3 .669 .456 2 23/32 — 40510200481 40510200482 — 405102004831/4 — 28 3 .669 .456 2 23/32 — 40510200484 40510200485 — 40510200486

5/16 18 — 3 .748 .502 2 15/16 — — 40510200487 40510200488 405102004895/16 — 24 3 .748 .502 2 15/16 — 40510200490 40510200491 — 405102004923/8 16 — 3 .984 — 3 3/8 — — 40510200493 40510200494 405102004953/8 — 24 3 .866 — 3 5/32 — 40510200496 40510200497 — 40510200498


H1 H2 H3 H4 H5

overall length

tap size NC

UNCUNJC

NFUNF

UNJF

threads perinch


length of

neck

length of

thread

numberof

flutes

250

®High-Performance TapsK-NI STI Spiral Flute, Modified BottomMachine Screw and Fractional Sizes for Screw Thread Inserts#4 to 1/4" (12 per package) • 5/16" to 3/8" (6 per package)

• special cobalt, high-vanadium premium steel• surface-treated oxide over nitride• for blind-hole tapping• modified bottom chamfer: 3-4 pitches• neck design for CNC equipment• suitable for UNJ aerospace internal threading applications

Recommended Applications:- plain-carbon, alloy, and tool steels (275-340 HB) (29-36 HRC)- ferritic, martensitic, and PH stainless steels (275-340 HB) (29-36 HRC)- nickel-base, heat-resistant alloys


4 40 — 2 .276 .411 2 40510200507 40510200508 40510200510 — —6 32 — 3 .354 .521 2 3/8 — 40510200512 40510200514 — 405102005168 32 — 3 .354 .583 2 3/8 — 40510200518 40510200520 — 40510200522

10 24 — 3 .433 .567 2 1/2 — 40510200524 40510200526 — 4051020052810 — 32 3 .354 .646 2 1/2 — 40510200530 40510200531 — 405102005331/4 20 — 3 .472 .653 2 23/32 — 40510200535 40510200536 — 405102005381/4 — 28 3 .394 .731 2 23/32 — 40510200540 40510200541 — 40510200543

5/16 18 — 3 .551 .699 2 15/16 — — 40510200545 40510200547 405102005485/16 — 24 3 .394 .856 2 15/16 — 40510200550 40510200551 — 405102005533/8 16 — 3 .630 1.417 3 3/8 — — 40510200555 40510200557 405102005583/8 — 24 3 .472 1.378 3 5/32 — 40510200560 40510200561 — 40510200563


H1 H2 H3 H4 H5

overall length

tap size NC

UNCUNJC

NFUNF

UNJF

threads perinch



length of

neck

length of

thread

numberof

flutes

251251251

K-NI STI Spiral Flute, Full Bottom


Machine Screw and Fractional Sizes for Screw Thread Inserts#4 to 1/4" (12 per package) • 5/16" to 3/8" (6 per package)

• special cobalt, high-vanadium premium steel• surface-treated oxide over nitride• for blind-hole tapping• full bottom chamfer: 1-2 pitches• neck design for CNC equipment• suitable for UNJ aerospace internal threading applications





4 40 — 2 .276 .411 2 — 40510200509 40510200511 — —6 32 — 3 .354 .521 2 3/8 — 40510200513 40510200515 — 405102005178 32 — 3 .354 .583 2 3/8 — 40510200519 40510200521 — 40510200523

10 24 — 3 .433 .567 2 1/2 — 40510200525 40510200527 — 4051020052910 — 32 3 .354 .646 2 1/2 — — 40510200532 — 405102005341/4 20 — 3 .472 .653 2 23/32 — — 40510200537 — 405102005391/4 — 28 3 .394 .731 2 23/32 — — 40510200542 — 40510200544

5/16 18 — 3 .551 .699 2 15/16 — — 40510200546 — 405102005495/16 — 24 3 .394 .856 2 15/16 — — 40510200552 — 405102005543/8 16 — 3 .630 1.417 3 3/8 — — 40510200556 — 405102005593/8 — 24 3 .472 1.378 3 5/32 — — 40510200562 — 40510200564


H1 H2 H3 H4 H5

overall length

tap size NC

UNCUNJC

NFUNF

UNJF

threads perinch



length of

neck

length of

thread

numberof

flutes

252

®High-Performance TapsK-MS Mold Hand TapsMachine Screw and Fractional Sizes#4 to 1/4" (12 per package) • 5/16" to 3/8" (6 per package)

• special cobalt alloy, high-speed steel• bright finish• for through-hole and blind-hole tapping• plug chamfer: 4-6 pitches• straight flute design • suitable for UNJ internal threading aerospace applicationsRecommended Applications:

- hardened steels and irons (36-45 HRC)For more technical information, see pages 680-702 of HolemakingCatalog 0070 (A00-2).

for blind-hole tapping plug chamfer

for through-hole tapping

4 40 — 3 40510200802 — —5 40 — 3 40510200805 — —6 32 — 3 — 40510200808 —8 32 — 3 — 40510200809 —

10 24 — 3 — 40510200811 —10 — 32 3 — 40510200814 —1/4 20 — 3 — 40510200819 —1/4 — 28 3 — 40510200820 —

5/16 18 — 4 — 40510200821 —5/16 — 24 4 — 40510200822 —3/8 16 — 4 — 40510200823 —3/8 — 24 4 — 40510200824 —


H2 H3 H4

tap size NC

UNCUNJC

NFUNFUNJF

threads per inchnumber

of flutes


253253253

K-AA Straight Flute Plug




• ultra-fine grain carbide• bright finish• for through-hole tapping• plug chamfer: 4-5 pitches• straight 3-flute design• suitable for UNJ internal threading aerospace applications

Recommended Applications:- cast aluminum- high silicon aluminum alloys


M3 x 0,5 3 D3 .625 1 15/16 40510201104M4 x 0,7 3 D4 .750 2 1/8 40510201106M5 x 0,8 3 D4 .875 2 3/8 40510201108M6 x 1,0 3 D5 1.000 2 1/2 40510201110

UIC #overall lengthlength of threadtap size and pitch(mm) number of flutes *pitch diameter limit


5 40 — 3 .625 1 15/16 40510201178 —6 32 — 3 .688 2 40510201180 —8 32 — 3 .750 2 1/8 40510201182 —10 24 — 3 .875 2 3/8 40510201184 —10 — 32 3 .875 2 3/8 40510201186 —

1/4 20 — 3 1.000 2 1/2 40510201188 —1/4 20 — 3 1.000 2 1/2 — 405102012081/4 — 28 3 1.000 2 1/2 40510201190 —1/4 — 28 3 1.000 2 1/2 — 40510201210

5/16 18 — 3 1.125 2 23/32 40510201192 —5/16 18 — 3 1.125 2 23/32 — 405102012125/16 — 24 3 1.125 2 23/32 40510201194 —5/16 — 24 3 1.125 2 23/32 — 40510201214

3/8 16 — 3 1.250 2 15/16 40510201196 —3/8 16 — 3 1.250 2 15/16 — 405102012163/8 — 24 3 1.250 2 15/16 40510201198 —3/8 — 24 3 1.250 2 15/16 — 40510201218


H3 H5

overall lengthlength ofthread

tap size NC

UNCUNJC

NFUNFUNJF

threads per inch

number of flutes


plug chamferfor through-hole tapping

254

®High-Performance TapsK-AA Straight Flute, Full BottomMetric SizesM3 to M6 (12 per package)


• ultra-fine grain carbide• bright finish• for blind-hole tapping• full bottom chamfer: 1-2 pitches• straight 3-flute design• suitable for UNJ internal threading aerospace applications

Recommended Applications:- cast aluminum- high silicon aluminum alloys


M3 x 0,5 3 D3 .625 1 15/16 40510201105M4 x 0,7 3 D4 .750 2 1/8 40510201107M5 x 0,8 3 D4 .875 2 3/8 40510201109M6 x 1,0 3 D5 1.000 2 1/2 40510201111

UIC #overall lengthlength of threadtap size and pitch(mm) number of flutes *pitch diameter limit


5 40 — 3 .625 1 15/16 40510201179 —6 32 — 3 .688 2 40510201181 —8 32 — 3 .750 2 1/8 40510201183 —10 24 — 3 .875 2 3/8 40510201185 —10 — 32 3 .875 2 3/8 40510201187 —

1/4 20 — 3 1.000 2 1/2 40510201189 —1/4 20 — 3 1.000 2 1/2 — 405102012091/4 — 28 3 1.000 2 1/2 40510201191 —1/4 — 28 3 1.000 2 1/2 — 40510201211

5/16 18 — 3 1.125 2 23/32 40510201193 —5/16 18 — 3 1.125 2 23/32 — 405102012135/16 — 24 3 1.125 2 23/32 40510201195 —5/16 — 24 3 1.125 2 23/32 — 40510201215

3/8 16 — 3 1.250 2 15/16 40510201197 —3/8 16 — 3 1.250 2 15/16 — 405102012173/8 — 24 3 1.250 2 15/16 40510201199 —3/8 — 24 3 1.250 2 15/16 —— 40510201219


H3 H5

overall lengthlength ofthread

tap size NC

UNCUNJC

NFUNFUNJF

threads per inch

number of flutes



255255255

K-TI LHS/RHC Spiral Flute Plug


Metric SizesM2,5 to M6 (12 per package)


• special cobalt, high-vanadium premium steel• left-hand spiral for tapping right-hand threads• surface-treated nitride • for through-hole tapping• plug chamfer: 4-6 pitches• neck design for CNC equipment• suitable for UNJ internal threading aerospace applications

Recommended Applications:- titanium and titanium alloys (110-450 HB) (≤ 48 HRC)- free-machining and low-silicon aluminum alloys

(hypoeutectic <12.2% Si)- copper alloys, magnesium- plastic



plug chamferfor through-hole tapping

UIC #

M2.5 x 0,45 2 D3 .500 .500 1 13/16 40510201021M3 x 0,5 3 D3 .313 .625 1 15/16 40510201022M3.5 x 0,6 3 D4 .375 .688 2 40510201023M4 x 0,7 3 D4 .375 .750 2 1/8 40510201024

M5 x 0,8 3 D4 .500 .875 2 3/8 40510201025M6 x 1 3 D5 .625 1.000 2 1/2 40510201026

overall lengthlength of necktap size and pitch(mm) length of thread*pitch diameter limitnumber of flutes

4 40 — 3 .335 .227 1 7/8 40510200581 — — —5 40 — 3 .374 .251 1 15/16 40510200582 — — —6 32 — 3 .413 .274 2 — 40510200583 — 405102005848 32 — 3 .453 .297 2 1/8 — 40510200585 — 40510200586

10 24 — 3 .531 .344 2 3/8 — 40510200587 — 4051020058810 — 32 3 .531 .344 2 3/8 — 40510200589 — 405102005901/4 20 — 3 .591 .409 2 1/2 — 40510200591 — 405102005921/4 — 28 3 .591 .409 2 1/2 — 40510200593 — 40510200594

5/16 18 — 3 .669 .456 2 23/32 — 40510200595 — 405102005965/16 — 24 3 .669 .456 2 23/32 — 40510200597 — 405102005983/8 16 — 3 .748 .502 2 15/16 — 40510200599 — 405102006003/8 — 24 3 .748 .502 2 15/16 — 40510200601 — 40510200602


H2 H3 H4 H5

overall length

length of

neck

length of

thread

tap size NC

UNCUNJC

NFUNF

UNJF

threads perinch number

of flutes


256

®High-Performance TapsK-TI RHS Spiral Flute, Modified BottomMetric SizesM2,5 to M6 (12 per package)


• special cobalt, high-vanadium premium steel• surface-treated nitride • for blind-hole tapping• modified bottom chamfer: 3-4 pitches• neck design for CNC equipment• suitable for UNJ internal threading aerospace applications





UIC #

M2.5 x 0,45 2 D3 .500 .500 1 13/16 40510201047M3 x 0,5 3 D3 .313 .625 1 15/16 40510201048M3.5 x 0,6 3 D4 .375 .688 2 40510201049M4 x 0,7 3 D4 .375 .750 2 1/8 40510201050

M5 x 0,8 3 D4 .500 .875 2 3/8 40510201051M6 x 1 3 D5 .625 1.000 2 1/2 40510201052

overall lengthlength of necktap size and pitch(mm) length of thread*pitch diameter limitnumber of flutes

4 40 — 3 .236 .326 1 7/8 40510200611 — 40510200613 —5 40 — 3 .236 .389 1 15/16 — 40510200614 — —6 32 — 3 .276 .411 2 — 40510200615 — 405102006178 32 — 3 .276 .474 2 1/8 — 40510200618 — 40510200620

10 24 — 3 .354 .521 2 3/8 — 40510200621 — —10 — 32 3 .276 .599 2 3/8 — 40510200623 — 405102006251/4 20 — 3 .433 .567 2 1/2 — 40510200626 — 405102006281/4 — 28 3 .354 .646 2 1/2 — 40510200630 — 40510200633

5/16 18 — 3 .472 .653 2 23/32 — 40510200634 — 405102006365/16 — 24 3 .394 .731 2 23/32 — 40510200638 — 405102006403/8 16 — 3 .551 .699 2 15/16 — 40510200641 — 405102006433/8 — 24 3 .394 .856 2 15/16 — 40510200645 — 40510200647


H2 H3 H4 H5

overall length

length of

neck

length of

thread

tap size NC

UNCUNJC

NFUNF

UNJF


of flutes



257257257

K-TI RHS Spiral Flute, Full Bottom



• special cobalt, high-vanadium premium steel• surface-treated nitride • for blind-hole tapping• full bottom chamfer: 1-2 pitches• neck design for CNC equipment• suitable for UNJ internal threading aerospace applications





4 40 — 3 .236 .326 1 7/8 — — 40510200612 —5 40 — 3 .236 .389 1 15/16 — — — —6 32 — 3 .276 .411 2 — 40510200616 — 405102006178 32 — 3 .276 .474 2 1/8 — 40510200619 — —

10 24 — 3 .354 .521 2 3/8 — 40510200622 — —10 — 32 3 .276 .599 2 3/8 — 40510200624 — 405102006251/4 20 — 3 .433 .567 2 1/2 — 40510200627 — 405102006291/4 — 28 3 .354 .646 2 1/2 — 40510200631 — —

5/16 18 — 3 .472 .653 2 23/32 — 40510200635 — 405102006375/16 — 24 3 .394 .731 2 23/32 — 40510200639 — —3/8 16 — 3 .551 .699 2 15/16 — 40510200642 — 405102006443/8 — 24 3 .394 .856 2 15/16 — 40510200646 — —


H2 H3 H4 H5

overall length

length of

neck

length of

thread

tap size NC

UNCUNJC

NFUNF

UNJF


of flutes


258

®High-Performance TapsDecimal Equivalents of Fraction, Number, Letter, and Metric Sizes

97 .0059 58 .0420 27 .1440 H .2660 17/32 .53120,15 mm .0059 57 .0430 3,7 mm .1457 6,8 mm .2677 13,5 mm .5315

96 .0063 1,1 mm .0433 26 .1470 6,9 mm .2717 35/64 .54690,16 mm .0063 1,15 mm .0453 3,75 mm .1476 I .2720 14 mm .5512

95 .0067 56 .0465 25 .1495 7 mm .2756 9/16 .56250,17 mm .0067 3/64 .0469 3,8 mm .1496 J .2770 14,5 mm .5709

94 .0071 1,2 mm .0472 24 .1520 7,1 mm .2795 37/64 .57810,18 mm .0071 1,25 mm .0492 3,9 mm .1535 K .2810 15 mm .5906

93 .0075 1,3 mm .0512 23 .1540 9/32 .2812 19/32 .59380,19 mm .0075 55 .0520 5/32 .1562 7,2 mm .2835 39/64 .6094

92 .0079 1,35 mm .0531 22 .1570 7,25 mm .2854 15,5 mm .61020,2 mm .0079 54 .0550 4 mm .1575 7,3 mm .2874 5/8 .6250

91 .0083 1,4 mm .0551 21 .1590 L .2900 16 mm .62990,21 mm .0083 1,45 mm .0571 20 .1610 7,4 mm .2913 41/64 .6406

90 .0087 1,5 mm .0591 4,1 mm .1614 M .2950 16,5 mm .64960,22 mm .0087 53 .0595 4,2 mm .1654 7,5 mm .2953 21/32 .6562

89 .0091 1,55 mm .0610 19 .1660 19/64 .2969 17 mm .66930,23 mm .0091 1/16 .0625 4,25 mm .1673 7,6 mm .2992 43/64 .67190,24 mm .0094 1,6 mm .0630 4,3 mm .1693 N .3020 11/16 .6875

88 .0095 52 .0635 18 .1695 7,7 mm .3031 17,5 mm .68900,25 mm .0098 1,65 mm .0650 11/64 .1719 7,75 mm .3051 45/64 .7031

87 .0100 1,7 mm .0669 17 .1730 7,8 mm .3071 18 mm .70870,26 mm .0102 51 .0670 4,4 mm .1732 7,9 mm .3110 23/32 .7188

86 .0105 1,75 mm .0689 16 .1770 5/16 .3125 18,5 mm .72830,27 mm .0106 50 .0700 4,5 mm .1772 8 mm .3150 47/64 .7344

85 .0110 1,8 mm .0709 15 .1800 O .3160 19 mm .74800,28 mm .0110 1,85 mm .0728 4,6 mm .1811 8,1 mm .3189 3/4 .75000,29 mm .0114 49 .0730 14 .1820 8,2 mm .3228 49/64 .7656

84 .0115 1,9 mm .0748 13 .1850 P .3230 19,5 mm .76770,3 mm .0118 48 .0760 4,7 mm .1850 8,25 mm .3248 25/32 .7812

83 .0120 1,95 mm .0768 4,75 mm .1870 8,3 mm .3268 20 mm .787482 .0125 5/64 .0781 3/16 .1875 21/64 .3281 51/64 .7969

0,32 mm .0126 47 .0785 4,8 mm .1890 8,4 mm .3307 20,5 mm .807181 .0130 2 mm .0787 12 .1890 Q .3320 13/16 .8125

0,34 mm .0134 2,05 mm .0807 11 .1910 8,5 mm .3346 21 mm .826880 .0135 46 .0810 4,9 mm .1929 8,6 mm .3386 53/64 .8281

0,35 mm .0138 45 .0820 10 .1935 R .3390 27/32 .84380,36 mm .0142 2,1 mm .0827 9 .1960 8,7 mm .3425 21,5 mm .8465

79 .0145 2,15 mm .0846 5 mm .1969 11/32 .3438 55/64 .85940,38 mm .0150 44 .0860 8 .1990 8,75 mm .3445 22 mm .8661

1/64 .0156 2,2 mm .0866 5,1 mm .2008 8,8 mm .3465 7/8 .87500,4 mm .0157 2,25 mm .0886 7 .2010 S .3480 22,25 mm .8760

78 .0160 43 .0890 13/64 .2031 8,9 mm .3504 22,5 mm .88580,42 mm .0165 2,3 mm .0906 6 .2040 9 mm .3543 57/64 .89060,44 mm .0173 2,35 mm .0925 5,2 mm .2047 T .3580 23 mm .90550,45 mm .0177 42 .0935 5 .2055 9,1 mm .3583 29/32 .9062

77 .0180 3/32 .0938 5,25 mm .2067 23/64 .3594 59/64 .92190,46 mm .0181 2,4 mm .0945 5,3 mm .2087 9,2 mm .3622 23,5 mm .92520,48 mm .0189 41 .0960 4 .2090 9,25 mm .3642 15/16 .93750,5 mm .0197 2,45 mm .0965 5,4 mm .2126 9,3 mm .3661 24 mm .9449

76 .0200 40 .0980 3 .2130 U .3680 61/64 .953175 .0210 2,5 mm .0984 5,5 mm .2165 9,4 mm .3701 24,5 mm .9646

0,55 mm .0217 39 .0995 7/32 .2188 9,5 mm .3740 31/32 .968874 .0225 38 .1015 5,6 mm .2205 3/8 .3750 25 mm .9843

0,6 mm .0236 2,6 mm .1024 2 .2210 V .3770 63/64 .984473 .0240 37 .1040 5,7 mm .2244 9,6 mm .3780 1 1.000072 .0250 2,7 mm .1063 5,75 mm .2264 9,7 mm .3819 25,5 mm 1.0039

0,65 mm .0256 36 .1065 1 .2280 9,75 mm .3839 1-1/64 1.015671 .0260 2,75 mm .1083 5,8 mm .2283 9,8 mm .3858 26 mm 1.0236

0,7 mm .0276 7/64 .1094 5,9 mm .2323 W .3860 1-1/32 1.031270 .0280 35 .1100 A .2340 9,9 mm .3898 26,5 mm 1.043369 .0292 2,8 mm .1102 15/64 .2344 25/64 .3906 1-3/64 1.0469

0,75 mm .0295 34 .1110 6 mm .2362 10 mm .3937 1-1/16 1.062568 .0310 33 .1130 B .2380 X .3970 27 mm 1.0630

1/32 .0312 2,9 mm .1142 6,1 mm .2402 Y .4040 1-5/64 1.07810,8 mm .0315 32 .1160 C .2420 13/32 .4062 27,5 mm 1.0827

67 .0320 3 mm .1181 6,2 mm .2441 Z .4130 1-3/32 1.093866 .0330 31 .1200 D .2460 10,5 mm .4134 28 mm 1.1024

0,85 mm .0335 3,1 mm .1220 6,25 mm .2461 27/64 .4219 1-7/64 1.109465 .0350 1/8 .1250 6,3 mm .2480 11 mm .4331 28,5 mm 1.1220

0,9 mm .0354 3,2 mm .1260 E .2500 7/16 .4375 1-1/8 1.125064 .0360 3,25 mm .1280 1/4 .2500 11,5 mm .4528 1-9/64 1.140663 .0370 30 .1285 6,4 mm .2520 29/64 .4531 29 mm 1.1417

0,95 mm .0374 3,3 mm .1299 6,5 mm .2559 15/32 .4688 1-5/32 1.156262 .0380 3,4 mm .1339 F .2570 12 mm .4724 29,5 mm 1.161461 .0390 29 .1360 6,6 mm .2598 31/64 .4844 1-11/64 1.1719

1 mm .0394 3,5 mm .1378 G .2610 12,5 mm .492160 .0400 28 .1405 6,7 mm .2638 1/2 .500059 .0410 9/64 .1406 17/64 .2656 13 mm .5118

1,05 mm .0413 3,6 mm .1417 6,75 mm .2657 33/64 .5156

sizes decimal inches sizes decimal inches sizes decimal inches sizes decimal inches sizes decimal inches

259

End Mills

page

Application Information . . . . . . . . . . . . . . 260

Carbide End Mills

High Shear . . . . . . . . . . . . . . . . . . . . . . 261

Single End — Stub Length. . . . . . . . . . . . 261

Single End — Standard Length . . . . . . . . . 262

Double End — Stub Length . . . . . . . . . . . . . . 263

Corner Radius. . . . . . . . . . . . . . . . . . . . . . . . . 264

Ball Nose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265

Double End Ball Nose — Stub Length. . . . . . . . 266

Metric End Mills . . . . . . . . . . . . . . . . . . . . . . . . . 267-269

260

®Application InformationStarting Feed and Speed Guidelines for Uncoated and TiN — Solid Carbide End Mills

Starting Feed and Speed Guidelines for TiAlN — Solid Carbide End Mills

workpiece material cutterstyle

cutter diameter and feed rates — chip load per tooth (ipt)

tool steel 42-50 HRC HEC KC610M 150-250 .0001 .0002 .0005 .00075tool steel annealed BNEC 175-275 .0005 .0006 .0015 .00175P20 steel SLEC 275-500 .0005 .0006 .001 .002die steel 32-42 HRC 125-200 .0002 .0005 .0015 .00175low carbon steels annealed HEC KC610M 250-400 .0004 .0005 .001 .002medium carbon steels BNEC 125-300 .0005 .0006 .0015 .00175

SLECstainless steel 400 series CHEC KC610M 400-500 .0005 .0008 .001 .0015stainless steel 300 series BNEC 300-400 .0005 .0008 .001 .0015

SLECcast iron 120-220 BHN HEC K600 250-600 .0005 .001 .002 .0025cast iron 220-320 BHN BNEC 100-300 .0002 .0004 .0008 .0014ductile iron SLEC 100-400 .0003 .0005 .001 .0015malleable iron 250-500 .0003 .0005 .001 .002aluminum HHSEC K600 1000+ .0005 .001 .002 .003high silicon aluminum 500-900 .0005 .001 .002 .003brass, bronze and copper alloys 400-800 .0005 .001 .002 .0025magnesium 900+ .0005 .001 .002 .003plastics 1000+ .001 .0015 .003 .0045

lighter radial depths of cutHigher range of recommended surface speeds should be used.greater radial depths of cutLower range of recommended surface speeds should be used.slotting applicationsSpeeds should be reduced approximately 20% from the lowestrange value shown.axial depth of cutRecommendations are not to exceed 1 1/2 times the cutter diameter.

reduce sfm as material hardness increasesWhen milling steels up to 60 HRC, chip color indicates correct feedand speed.

— A tan color indicates proper operating parameters.— Blue or dark-color chips indicate speed should be reduced.— White chips indicate speed should be increased.

NOTE: The above guidelines may require possible variations to achieve optimumresults.

1/16 1/8 1/4 3/8grade speed

(sfm)

workpiece material cutterstyle

cutter diameter and feed rates — chip load per tooth (ipt)

tool steel 42-50 HRC HEC KC635M 200-325 .0001 .0002 .0005 .00075tool steel annealed BNEC KC631M 225-350 .0005 .0006 .0015 .00175P20 steel SLEC KC633M 380-650 .0005 .0006 .001 .002die steel 32-42 HRC 160-260 .0002 .0005 .0015 .00175die steel 52-60 HRC 70-120 .0002 .0004 .0005 .00075low carbon steels annealed HEC KC635M 325-520 .0004 .0005 .001 .002medium carbon steels BNEC KC631M 215-390 .0005 .0006 .0015 .00175hardened steels 48-52 HRC, SLEC KC633M 70-130 .0001 .0002 .0005 .00075(1045, forge steel)stainless steel 400 series HEC KC635M 325-650 .0005 .0008 .001 .0015stainless steel 300 series BNEC KC631M 350-520 .0005 .0008 .001 .0015

SLEC KC633Mcast iron 120-220 BHN HEC KC635M 425-780 .0005 .001 .002 .0025cast iron 220-320 BHN BNEC KC631M 200-390 .0002 .0004 .0008 .0014ductile iron SLEC KC633M 250-520 .0003 .0005 .001 .0015malleable iron 375-650 .0003 .0005 .001 .002aluminum HHSEC KC635M 1000+ .0005 .001 .002 .003high silicon aluminum KC631M 700-1170 .0005 .001 .002 .003brass, bronze and copper alloys KC633M 600-1050 .0005 .001 .002 .0025magnesium 900+ .0005 .001 .002 .003plastics 1000+ .001 .0015 .003 .0045titanium alloys HEC KC635M 125-200 .0002 .0003 .0005 .00075high-temp. alloys (nickel base) BNEC KC631M 65-130 .0002 .0004 .0008 .0009Monel high nickel steels SLEC KC633M 225-325 .0003 .0005 .001 .0015

1/16 1/8 1/4 3/8grade speed

(sfm)

261261261

High-Performance Solid Carbide End MillsHigh Shear – Specifically Designed for Non-Ferrous Applicationsright-hand spiral/right-hand cutting/center cutting

1/16 1/8 1 1/2 3/16 1 5/16

3/32 1/8 1 1/2 3/8 1 1/8

1/8 1/8 1 1/2 3/8 1 1/8

5/32 3/16 2 9/16 1 7/16

3/16 3/16 2 9/16 1 7/16

7/32 1/4 2 1/2 5/8 1 7/8

1/4 1/4 2 1/2 3/4 1 3/4

9/32 5/16 2 1/2 3/4 1 3/4

5/16 5/16 2 1/2 13/16 1 11/16

3/8 3/8 2 1/2 7/8 1 5/8

end mill dimensions

d2 l1 l2 l3d1

HHSEC-062-S2 � � �

HHSEC-094-S2 � � �

HHSEC-125-S2 � � �

HHSEC-156-S2 � � �

HHSEC-188-S2 � � �

HHSEC-219-S2 � � �

HHSEC-250-S2 � � �

HHSEC-281-S2 � � �

HHSEC-312-S2 � � �

HHSEC-375-S2 � � �

catalog number

K60

0

KC

610M

KC

635M

2 flute 4 flute

HHSEC-062-S4 � � �

HHSEC-094-S4 � � �

HHSEC-125-S4 � � �

HHSEC-156-S4 � � �

HHSEC-188-S4 � � �

HHSEC-219-S4 � � �

HHSEC-250-S4 � � �

HHSEC-281-S4 � � �

HHSEC-312-S4 � � �

HHSEC-375-S4 � � �

catalog number

K60

0

KC

610M

KC

635M

Single End – Stub Length – 2 and 4 Flute30° right-hand spiral/right-hand cutting/center cutting

1/16 1/8 1 1/2 1/8 1 3/8

3/32 1/8 1 1/2 3/16 1 1/32

1/8 1/8 1 1/2 1/4 1 1/4

5/32 3/16 2 5/16 1 11/16

3/16 3/16 2 3/8 1 5/8

7/32 1/4 2 7/16 1 9/16

1/4 1/4 2 1/2 1 1/2

5/16 5/16 2 1/2 1 1/2

3/8 3/8 2 5/8 1 3/8

end mill dimensions

d2 l1 l2 l3d1

SLEC-061-S2 � �

SLEC-094-S2 � �

SLEC-125-S2 � �

SLEC-156-S2 � �

SLEC-188-S2 � �

SLEC-219-S2 � �

SLEC-250-S2 � �

SLEC-312-S2 � �

SLEC-375-S2 � �

catalog number

K60

0

KC

610M

2 flute 4 flute

SLEC-061-S4 � �

SLEC-094-S4 � �

SLEC-125-S4 � �

SLEC-156-S4 � �

SLEC-188-S4 � �

SLEC-219-S4 � �

SLEC-250-S4 � �

SLEC-312-S4 � �

SLEC-375-S4 � �

catalog number

K60

0

KC

610M

General Purpose30° right-hand spiral/right-hand cutting/center cutting/square end

262

®High-Performance Solid Carbide End Mills

1/64 1/8 1 1/2 1/32 1 15/32

1/32 1/8 1 1/2 5/64 1 27/64

3/64 1/8 1 1/2 7/64 1 25/64

1/16 1/8 1 1/2 3/16 1 5/16

5/64 1/8 1 1/2 3/16 1 5/16

3/32 1/8 1 1/2 3/8 1 1/8

7/64 1/8 1 1/2 3/8 1 1/8

1/8 1/8 1 1/2 1/2 1

9/64 3/16 2 9/16 1 7/16

5/32 3/16 2 9/16 1 7/16

11/64 3/16 2 5/8 1 3/8

3/16 3/16 2 5/8 1 3/8

13/64 1/4 2 1/2 5/8 1 7/8

7/32 1/4 2 1/2 5/8 1 7/8

15/64 1/4 2 1/2 3/4 1 3/4

1/4 1/4 2 1/2 3/4 1 3/4

17/64 5/16 2 1/2 3/4 1 3/4

9/32 5/16 2 1/2 3/4 1 3/4

19/64 5/16 2 1/2 13/16 1 11/16

5/16 5/16 2 1/2 13/16 1 11/16

21/64 3/8 2 1/2 1 1 1/2

11/32 3/8 2 1/2 1 1 1/2

23/64 3/8 2 1/2 1 1 1/2

3/8 3/8 2 1/2 1 1 1/2

l3l2

end mill dimensions

l1d2d1

HEC-016-S2 � �

HEC-031-S2 � �

HEC-047-S2 � �

HEC-062-S2 � �

HEC-078-S2 � �

HEC-094-S2 � �

HEC-109-S2 � �

HEC-125-S2 � � �

HEC-141-S2 � �

HEC-156-S2 � �

HEC-172-S2 � �

HEC-188-S2 � � �

HEC-203-S2 � �

HEC-219-S2 � �

HEC-234-S2 � �

HEC-250-S2 � � �

HEC-266-S2 � �

HEC-281-S2 � �

HEC-297-S2 � �

HEC-312-S2 � � �

HEC-328-S2 � �

HEC-344-S2 � �

HEC-360-S2 � �

HEC-375-S2 � � �

catalog number K

600

KC

610M

KC

635M

2 flute

HEC-016-S4 � �

HEC-031-S4 � �

HEC-047-S4 � �

HEC-062-S4 � �

HEC-078-S4 � �

HEC-094-S4 � �

HEC-109-S4 � �

HEC-125-S4 � � �

HEC-141-S4 � �

HEC-156-S4 � �

HEC-172-S4 � �

HEC-188-S4 � � �

HEC-203-S4 � �

HEC-219-S4 � �

HEC-234-S4 � �

HEC-250-S4 � � �

HEC-266-S4 � �

HEC-281-S4 � �

HEC-297-S4 � �

HEC-312-S4 � � �

HEC-328-S4 � �

HEC-344-S4 � �

HEC-360-S4 � �

HEC-375-S4 � � �

catalog number K

600

KC

610M

KC

635M

4 flute

HEC-016-S3 � �

HEC-031-S3 � �

HEC-047-S3 � �

HEC-062-S3 � �

HEC-078-S3 � �

HEC-094-S3 � �

HEC-109-S3 � �

HEC-125-S3 � �

HEC-141-S3 � �

HEC-156-S3 � �

HEC-172-S3 � �

HEC-188-S3 � �

HEC-203-S3 � �

HEC-219-S3 � �

HEC-234-S3 � �

HEC-250-S3 � �

HEC-266-S3 � �

HEC-281-S3 � �

HEC-297-S3 � �

HEC-312-S3 � �

HEC-328-S3 � �

HEC-344-S3 � �

HEC-360-S3 � �

HEC-375-S3 � �

catalog number K

600

KC

610M

3 flute

263263263

High-Performance Solid Carbide End MillsDouble Endgeneral purpose/right-hand cutting/right-hand spiral/center cutting

1/32 1/8 1 1/2 1/16 1 7/16

3/64 1/8 1 1/2 3/32 1 13/32

1/16 1/8 1 1/2 1/8 1 3/8

5/64 1/8 1 1/2 1/8 1 3/8

3/32 1/8 1 1/2 3/16 1 5/16

7/64 1/8 1 1/2 3/16 1 5/16

1/8 3/16 2 1/4 1 3/4

9/64 3/16 2 5/16 1 3/16

5/32 3/16 2 5/16 1 3/16

11/64 3/16 2 5/16 1 3/16

3/16 3/16 2 3/8 1 5/8

13/64 1/4 2 1/2 1/2 2

7/32 1/4 2 1/2 1/2 2

15/64 1/4 2 1/2 1/2 2

1/4 1/4 2 1/2 1/2 2

9/32 5/16 2 1/2 1/2 2

5/16 5/16 2 1/2 1/2 2

3/8 3/8 3 9/16 2 7/16

DHEC-031-S2 � �

DHEC-047-S2 � �

DHEC-062-S2 � �

DHEC-078-S2 � �

DHEC-094-S2 � �

DHEC-109-S2 � �

DHEC-125-S2 � � �

DHEC-141-S2 � �

DHEC-156-S2 � �

DHEC-172-S2 � �

DHEC-188-S2 � � �

DHEC-203-S2 � �

DHEC-219-S2 � �

DHEC-234-S2 � �

DHEC-250-S2 � � �

DHEC-281-S2 � �

DHEC-312-S2 � � �

DHEC-375-S2 � � �

catalog number

K60

0

KC

610M

KC

635M

2 flute

DHEC-031-S4 � � �

DHEC-047-S4 � �

DHEC-062-S4 � � �

DHEC-078-S4 � �

DHEC-094-S4 � � �

DHEC-109-S4 � �

DHEC-125-S4 � � �

DHEC-141-S4 � �

DHEC-156-S4 � �

DHEC-172-S4 � �

DHEC-188-S4 � � �

DHEC-203-S4 � �

DHEC-219-S4 � �

DHEC-234-S4 � �

DHEC-250-S4 � � �

DHEC-281-S4 � �

DHEC-312-S4 � � �

DHEC-375-S4 � � �

catalog number

K60

0

KC

610M

KC

635M

4 flute

l2 l3

end mill dimensions

l1d2d1

264

High-Performance Solid Carbide End Mills ®

Corner Radiusright-hand spiral/right-hand cutting/center cutting

.015 1/8 1/8 1 1/2 1/2 1

.020 1/8 1/8 1 1/2 1/2 1

.015 3/16 3/16 2 5/8 1 3/8

.020 3/16 3/16 2 5/8 1 3/8

.030 3/16 3/16 2 5/8 1 3/8

.015 1/4 1/4 2 1/2 3/4 1 3/4

.020 1/4 1/4 2 1/2 3/4 1 3/4

.030 1/4 1/4 2 1/2 3/4 1 3/4

.045 1/4 1/4 2 1/2 3/4 1 3/4

.015 5/16 5/16 2 1/2 13/16 1 11/16

.020 5/16 5/16 2 1/2 13/16 1 11/16

.030 5/16 5/16 2 1/2 13/16 1 11/16

.045 5/16 5/16 2 1/2 13/16 1 11/16

.015 3/8 3/8** 2 1/2 1 1 1/2

.020 3/8 3/8** 2 1/2 1 1 1/2

.030 3/8 3/8** 2 1/2 1 1 1/2

.045 3/8 3/8** 2 1/2 1 1 1/2

l1 l2 l3

end mill dimensions

d2d1cornerradius

4 flute

CRHEC-125-S4-R15 � �

CRHEC-125-S4-R20 � �

CRHEC-188-S4-R15 � �

CRHEC-188-S4-R20 � �

CRHEC-188-S4-R30 � �

CRHEC-250-S4-R15 � �

CRHEC-250-S4-R20 � �

CRHEC-250-S4-R30 � �

CRHEC-250-S4-R45 � �

CRHEC-312-S4-R15 � �

CRHEC-312-S4-R20 � �

CRHEC-312-S4-R30 � �

CRHEC-312-S4-R45 � �

CRHEC-375-S4-R15 � �

CRHEC-375-S4-R20 � �

CRHEC-375-S4-R30 � �

CRHEC-375-S4-R45 � �

catalog number

K60

0

KC

610M

KC

635M

**Weldon flat on shank.

265265265

High-Performance Solid Carbide End MillsBall-Nose30° right-hand spiral/right-hand cutting/center cutting

1/64 1/8 1 1/2 1/32 1 15/32

1/32 1/8 1 1/2 5/64 1 27/64

3/64 1/8 1 1/2 7/64 1 25/64

1/16 1/8 1 1/2 3/16 1 5/16

5/64 1/8 1 1/2 3/16 1 5/16

3/32 1/8 1 1/2 3/8 1 1/8

7/64 1/8 1 1/2 3/8 1 1/8

1/8 1/8 1 1/2 1/2 1

9/64 3/16 2 9/16 1 7/16

5/32 3/16 2 9/16 1 7/16

11/64 3/16 2 5/8 1 3/8

3/16 3/16 2 5/8 1 3/8

13/64 1/4 2 1/2 5/8 1 7/8

7/32 1/4 2 1/2 5/8 1 7/8

15/64 1/4 2 1/2 3/4 1 3/4

1/4 1/4 2 1/2 3/4 1 3/4

17/64 5/16 2 1/2 3/4 1 3/4

9/32 5/16 2 1/2 3/4 1 3/4

19/64 5/16 2 1/2 13/16 1 11/16

5/16 5/16 2 1/2 13/16 1 11/16

21/64 3/8 2 1/2 1 1 1/2

11/32 3/8 2 1/2 1 1 1/2

23/64 3/8 2 1/2 1 1 1/2

3/8 3/8 2 1/2 1 1 1/2

l2 l3

end mill dimensions

l1d2d1

BNEC-016-S2 � �

BNEC-031-S2 � �

BNEC-047-S2 � �

BNEC-062-S2 � �

BNEC-078-S2 � �

BNEC-094-S2 � �

BNEC-109-S2 � �

BNEC-125-S2 � � �

BNEC-141-S2 � �

BNEC-156-S2 � �

BNEC-172-S2 � �

BNEC-188-S2 � � �

BNEC-203-S2 � �

BNEC-219-S2 � �

BNEC-234-S2 � �

BNEC-250-S2 � � �

BNEC-266-S2 � �

BNEC-281-S2 � �

BNEC-297-S2 � �

BNEC-312-S2 � � �

BNEC-328-S2 � �

BNEC-344-S2 � �

BNEC-360-S2 � �

BNEC-375-S2 � � �

catalog number

K60

0

KC

610M

KC

635M

2 flute

BNEC-016-S4 � �

BNEC-031-S4 � �

BNEC-047-S4 � �

BNEC-062-S4 � �

BNEC-078-S4 � �

BNEC-094-S4 � �

BNEC-109-S4 � �

BNEC-125-S4 � � �

BNEC-141-S4 � �

BNEC-156-S4 � �

BNEC-172-S4 � �

BNEC-188-S4 � � �

BNEC-203-S4 � �

BNEC-219-S4 � �

BNEC-234-S4 � �

BNEC-250-S4 � � �

BNEC-266-S4 � �

BNEC-281-S4 � �

BNEC-297-S4 � �

BNEC-312-S4 � � �

BNEC-328-S4 � �

BNEC-344-S4 � �

BNEC-360-S4 � �

BNEC-375-S4 � � �

catalog number

K60

0

KC

610M

KC

635M

4 flute

266

®High-Performance Solid Carbide End MillsDouble End Ball-Nose30° right-hand spiral/right-hand cutting/center cutting

1/32 1/8 1 1/2 1/16 1 7/16

3/64 1/8 1 1/2 3/32 1 13/32

1/16 1/8 1 1/2 1/8 1 3/8

5/64 1/8 1 1/2 1/8 1 3/8

3/32 1/8 1 1/2 3/16 1 5/16

7/64 1/8 1 1/2 3/16 1 5/16

1/8 3/16 2 1/4 1 3/4

9/64 3/16 2 5/16 1 11/16

5/32 3/16 2 5/16 1 11/16

11/64 3/16 2 5/16 1 11/16

3/16 3/16 2 3/8 1 5/8

13/64 1/4 2 1/2 1/2 2

7/32 1/4 2 1/2 1/2 2

15/64 1/4 2 1/2 1/2 2

1/4 1/4 2 1/2 1/2 2

9/32 5/16 2 1/2 1/2 2

5/16 5/16 2 1/2 1/2 2

3/8 3/8 3 9/16 2 7/16

4 flute

DBNEC-031-S4 � �

DBNEC-047-S4 � �

DBNEC-062-S4 � �

DBNEC-078-S4 � �

DBNEC-094-S4 � �

DBNEC-109-S4 � �

DBNEC-125-S4 � �

DBNEC-141-S4 � �

DBNEC-156-S4 � �

DBNEC-172-S4 � �

DBNEC-188-S4 � �

DBNEC-203-S4 � �

DBNEC-219-S4 � �

DBNEC-234-S4 � �

DBNEC-250-S4 � �

DBNEC-281-S4 � �

DBNEC-312-S4 � �

DBNEC-375-S4 � �

catalog numberK

600

KC

610M

KC

635M

l2 l3

end mill dimensions

l1d2d1

267267267

Metric High-Performance Solid Carbide End Mills

4 6 57 8 36

5 6 57 10 36

6 6 57 10 36

8 8 63 16 36

10 10 72 19 40

2 flute

F2AA0400ADL45 � �

F2AA0500ADL45 � �

F2AA0600ADL45 � �

F2AA0800ADL45 � �

F2AA1000ADL45 � �

catalog number

K60

0

KC

631M

l2 l3

end mill dimensions

l1d2d1

High Shear — Specially Designed for Non-Ferrous ApplicationsDIN 6527L, 45° Helix Angle

3 3 38 12 24

4 4 50 12 35

5 6 50 14 33

6 6 50 16 30

8 8 63 20 38

10 10 76 22 46

3 flute

F3AA0300AWS45 �

F3AA0400AWS45 �

F3AA0500AWS45 �

F3AA0600AWS45 �

F3AA0800AWM45 �

F3AA1000AWL45 �

catalog number

K60

0

KC

631M

l2 l3

end mill dimensions

l1d2d1

268

®Metric High-Performance Solid Carbide End MillsGeneral PurposeDIN 6527L, 30° Helix Angle

2,50 6 57 7 — 39

3,00 6 57 7 — 39

4,00 6 57 8 11 38

4,50 6 57 8 11 38

4,80 6 57 10 — 38

5,00 6 57 10 13 37

5,50 6 57 10 — 37

5,75 6 57 10 — 37

6,00 6 57 10 13 36

6,50 8 63 13 — 36

6,75 8 63 13 — 36

7,00 8 63 13 16 36

7,75 8 63 16 — 36

8,00 8 63 16 19 36

8,50 10 72 16 — 40

8,70 10 72 16 — 40

9,00 10 72 16 19 40

9,70 10 72 19 — 40

10,00 10 72 19 22 40

l3l2

2 and 3flute

l24 flute

end mill dimensions

l1d2d1

F2AH0250ADL30 � �

F2AH0300ADL30 � �

F2AH0400ADL30 � �

F2AH0450ADL30 � �

— � �

F2AH0500ADL30 � �

F2AH0550ADL30 � �

— � �

F2AH0600ADL30 � �

— � �

— � �

F2AH0700ADL30 � �

— � �

F2AH0800ADL30 � �

— � �

— � �

F2AH0900ADL30 � �

— � �

F2AH1000ADL30 � �

catalog number K

600

KC

625M

2 flute

— � �

— � �

F3AH0400ADL30 � �

F3AH0450ADL30 � �

F3AH0480ADL30 � �

F3AH0500ADL30 � �

F3AH0550ADL30 � �

F3AH0575ADL30 � �

F3AH0600ADL30 � �

F3AH0650ADL30 � �

F3AH0675ADL30 � �

F3AH0700ADL30 � �

F3AH0775ADL30 � �

F3AH0800ADL30 � �

F3AH0850ADL30 � �

F3AH0870ADL30 � �

F3AH0900ADL30 � �

F3AH0970ADL30 � �

F3AH1000ADL30 � �

catalog number K

600

KC

625M

3 flute

— � �

— � �

F4AJ0400ADL30 � �

F4AJ0450ADL30 � �

— � �

F4AJ0500ADL30 � �

— � �

— � �

F4AJ0600ADL30 � �

— � �

— � �

F4AJ0700ADL30 � �

— � �

F4AJ0800ADL30 � �

— � �

— � �

F4AJ0900ADL30 � �

— � �

F4AJ1000ADL30 � �

catalog number K

600

KC

625M

4 flute

269269269

Ball Nose and Radiused End MillsDIN 6528 and DIN 6527L, 30° Helix Angle

Metric High-Performance Solid Carbide End Mills

2 6 57 6 — 36

3 6 57 7 7 36

4 6 57 8 8 36

5 6 57 10 11 36

6 6 57 10 13 36

8 8 63 16 19 36

10 10 72 19 22 40

end mill dimensions

d2 l1l2

2 flute

l24 flute

l3d1

F2AL0200ADL30 � �

F2AL0300ADL30 � �

F2AL0400ADL30 � �

F2AL0500ADL30 � �

F2AL0600ADL30 � �

F2AL0800ADL30 � �

F2AL1000ADL30 � �

catalog number

K60

0

KC

633M

2 flute 4 flute

— � �

F4AL0300ADL30 � �

F4AL0400ADL30 � �

F4AL0500ADL30 � �

F4AL0600ADL30 � �

F4AL0800ADL30 � �

F4AL1000ADL30 � �

catalog number

K60

0

KC

633M

270

DA Collets

• Kennametal Double Angle (DA) collet system provides true gripping on cutting margins of drills for greater feeds andspeeds. DA collets allow shorter projectionlengths for improved accuracy.

• Range of collapse is 1/32 (0,8 mm).

• Use these collets mainly for drillingapplications.

TG Collets

• Tremendous Grip (TG) single anglecollet system provides additional grip with better concentricity.

• Range of collapse is 1/64 (0,4 mm).

• Use these collets in drilling, milling (TGNP),and tapping (TGST) operations.

ER Collets

• ER collets (DIN 6499) offer flexibility when drilling, light milling, or tapping with or without the use of coolant.

• Three different styles of locknuts are available.

• Range of collapse is .039 (1 mm).

Toolholding Systems

271271

Toolholding Systems

Collet Chucks

DA ’01 Style (Double Angle) . . . . . . . . . . . . . . . 272DA ’04 Style (Double Angle) . . . . . . . . . . . . . . . . 273DA ’08 Style (Double Angle) . . . . . . . . . . . . . . . . . 274

Collet and Solid Tap Chucks

ER Style (DIN 6499) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275TG Style (Tremendous Grip) . . . . . . . . . . . . . . . . . . . . . . . 276

Tap Chucks

DA – Tension Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277DA – Tension and Compression . . . . . . . . . . . . . . . . . . . . . . . 278TG – Self Releasing (Tension Only). . . . . . . . . . . . . . . . . . . . . . 279

Floating Holders

DA – Double Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280DA – Full Floating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281DA – Roller Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282

Adjustable Flange

DA ’08 Style (Double Angle) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283

Collets

DA – Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284Tapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285Reamer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286

ER – Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287Tapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288

TG – Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291Tapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292

page

271

Recommended for Drilling

Spares and Information

locknut torque**(ft.-lbs.)

catalog number

SS050DA301544 NP301 LN301 25-30 OEW075 SS031031GSS062DA301319 NP301 LN301 25-30 OEW075 SS031031GSS062DA301544 NP301 LN301 25-30 OEW075 SS031031GSS062DA201325 NP201 LN201 32-40 OEW125 SS038031GSS062DA201600 NP201 LN201 32-40 OEW125 SS038031GSS075DA301344 NP301 LN301 25-30 OEW075 SS031031GSS075DA301544 NP301 LN301 25-30 OEW075 SS031031GSS075DA201600 NP201 LN201 32-40 OEW125 SS044038GSS075DA101650 NP101 LN101 40-50 OEW150 SS050038GSS100DA301544 NP301 LN301 25-30 OEW075 SS031031GSS100DA201600 NP201 LN201 32-40 OEW125 SS044038GSS100DA101650 NP101 LN101 40-50 OEW150 SS062041GSS100DA181638 NP181 LN181 60-75 OEW175 SS075041G

nosepiece* locknut* wrench* stop screw*

*Chuck includes locknut, nosepiece, and stop screw. Locknut wrench must be ordered separately.**For maximum safety and performance, tighten the locknut to the specified torque value.

• Offers the most accurate double angle design possible;recommended for high-speed applications.

• Unique bearing-style nosepiece provides fixture clearance.

• Collets collapse 1/32", and can grip on back taper and margins ofdrills to allow for maximum feed rates and more accurate holes.

• Unique, adjustable stop screw allows drills to be preset and provides through-coolant capability.

ColletsSee page 284.

®Toolholding SystemsDouble Angle ’01 Style Collet Chucks – Straight Shank

catalog numbermm

d1 d2 l1 l2 l3 min. l3 max.Ø

NOTE: Coolant-fed tools require coolant caps and collets.

SS050DA301544 1/64-1/4 0,5-6 300DA .50 .87 5.44 4.00 1.44 4.25 .30SS062DA301319 1/64-1/4 0,5-6 300DA .62 .87 3.19 1.75 1.44 2.75 .27SS062DA301544 1/64-1/4 0,5-6 300DA .62 .87 5.44 4.00 1.44 4.25 .47SS062DA201325 1/64-3/8 0,5-10 200DA .62 1.44 3.25 1.25 1.44 2.81 .28SS062DA201600 1/64-3/8 0,5-10 200DA .62 1.44 6.00 4.00 1.44 4.25 .52SS075DA301344 1/64-1/4 0,5-6 300DA .75 .87 3.44 2.00 1.44 3.00 .43SS075DA301544 1/64-1/4 0,5-6 300DA .75 .87 5.44 4.00 1.44 5.00 .68SS075DA201600 1/64-3/8 0,5-10 200DA .75 1.44 6.00 4.00 1.69 4.12 .75SS075DA101650 1/32-9/16 1-14 100DA .75 1.73 6.50 4.00 1.75 5.75 .81SS100DA301544 1/64-1/4 0,5-6 300DA 1.00 .87 5.44 4.00 1.44 4.25 1.20SS100DA201600 1/64-3/8 0,5-10 200DA 1.00 1.44 6.00 4.00 1.69 4.12 1.33SS100DA101650 1/32-9/16 1-14 100DA 1.00 1.73 6.50 4.00 1.88 5.62 1.44SS100DA181638 1/32-3/4 1-20 180DA 1.00 2.02 6.38 4.00 1.75 5.62 1.41

272272

inch


catalog number

SS050DA304438 LNA304M 25-30 OEW050 SS031031GSS050DA304681 LNA304M 25-30 OEW050 SS031031GSS075DA204469 LNA204M 32-40 OEW075 SS044038GSS075DA204712 LNA204M 32-40 OEW075 SS044038GSS100DA104488 LNA104M 40-50 OEW094 SS062041GSS100DA104731 LNA104M 40-50 OEW094 SS062041G

locknut*locknut torque**

(ft.-lbs.)wrench* stop screw*

*Chuck includes locknut and stop screw. Locknut wrench must be ordered separately.**For maximum safety and performance, tighten the locknut to the specified torque value.

Double Angle ’04 Style Collet Chucks – Straight Shank

Toolholding Systems


• Small outside diameter is ideal for use with machining centers and for solving close center distance and fixture clearance problems.

• Collets collapse 1/32" and can grip on back taper andmargins of drills to allow for maximum feed rates.

• Unique, adjustable stop screw allows drills to be preset andprovides through-coolant capability.


catalog number d1 d2 l1 l2 l3 min. l3 max.


SS050DA304438 1/64-1/4 0,5-6 300DA .50 .56 4.38 3.00 1.56 3.94 .24SS050DA304681 1/64-1/4 0,5-6 300DA .50 .56 6.81 5.42 1.50 4.25 .37SS075DA204469 1/64-3/8 0,5-10 200DA .75 .84 4.69 3.03 1.69 4.12 .58SS075DA204712 1/64-3/8 0,5-10 200DA .75 .84 7.12 5.50 1.69 4.74 .89SS100DA104488 1/32-9/16 1-14 100DA 1.00 1.06 4.88 2.97 1.94 4.19 1.08SS100DA104731 1/32-9/16 1-14 100DA 1.00 1.06 7.31 5.40 1.94 6.62 1.62

273

mm

Ø

inch



catalog number

SS050DA308516 LNA308M 20-25 OEW068 SS031031GSS062DA308516 LNA308M 20-25 OEW068 SS031031GSS062DA208569 NPA208 32-40 OEW100 SS044038GSS075DA308516 LNA308M 20-25 OEW069 SS031031GSS075DA208531 NPA208 32-40 OEW100 SS044038GSS075DA108588 LNA108M 40-50 OEW125 SS050038GSS100DA308516 LNA308M 20-25 OEW068 SS031031GSS100DA208531 NPA208 32-40 OEW100 SS044038GSS100DA108556 LNA108M 40-50 OEW125 SS062041GSS100DA188638 NPA188 60-75 OEW150 SS075041G




• Offers a rugged heavy-duty design.

• Collets collapse 1/32" and can grip on back taper and margins of drills to allow for maximum feed rates and more accurate holes.

• Unique adjustable stop screw allows drills to be preset andprovides through-coolant capability.


®Toolholding SystemsDouble Angle ’08 Style Collet Chucks – Straight Shank



SS050DA308516 1/64-1/4 0,5-6 300DA .50 .79 5.16 4.00 1.50 4.25 .28SS062DA308516 1/64-1/4 0,5-6 300DA .62 .79 5.16 4.00 1.50 4.25 .44SS062DA208569 1/64-3/8 0,5-10 200DA .62 1.15 5.69 4.00 1.62 4.25 .49SS075DA308516 1/64-1/4 0,5-6 300DA .75 .79 5.16 4.25 1.50 4.25 .64SS075DA208531 1/64-3/8 0,5-10 200DA .75 1.15 5.31 4.00 1.62 4.12 .66SS075DA108588 1/32-9/16 1-14 100DA .75 1.42 5.88 4.00 1.81 5.31 .73SS100DA308516 1/64-1/4 0,5-6 300DA 1.00 .79 5.16 4.00 1.50 4.25 1.14SS100DA208531 1/64-3/8 0,5-10 200DA 1.00 1.15 5.31 4.00 1.69 4.12 1.18SS100DA108556 1/32-9/16 1-14 100DA 1.00 1.42 5.56 4.00 1.94 4.88 1.23SS100DA188638 1/32-3/4 1-20 180DA 1.00 1.73 6.38 4.00 1.94 5.62 1.41

274274

mm

Ø

inch



catalog number

metricSS200ER16182M LER16M 15-20 ER16WEM CSS1020MinchSS038ER08500 LER08M 3-4 ER08WEM S-1762SS050ER11700 LER11M 8-10 ER11WEM SS031031GSS075ER16700 LER16M 15-20 ER16WEM SS050038GSS100ER20700 LNER20M 60-75 ER20WM SS062041GSS100ER25750 LNER25M 75-95 ER25WM SS075041G

locknut* wrench* stop screw*


ER-Style DIN 6499 Collet Chucks – Straight Shank

Toolholding Systems

Recommended for Drilling and Tapping

• ER8 and ER11 collets collapse 0,5 mm. Larger series collapse 1 mm.

ColletsSee pages

287-288.


metricSS200ER16182M .02-.40 0,5-10,0 16ER 20 mm 0,87 7,14 5,51 1,59 6,35 1.0inchSS038ER08500 .02-.19 0,5-5,0 8ER .375 .47 5.00 4.14 .85 4.31 .2SS050ER11700 .02-.27 0,5-7,0 11ER .50 .63 7.00 5.51 1.27 6.31 .4SS075ER16700 .02-.40 0,5-10,0 16ER .75 .87 7.00 5.51 1.24 3.54 .9SS100ER20700 .02-.51 0,5-13,0 20ER 1.00 1.38 7.00 5.51 1.42 6.31 1.6SS100ER25750 .04-.63 1,0-16,0 25ER 1.00 1.65 7.50 5.69 1.57 6.81 1.7

275

mm

Ø

inch

Recommended for Drilling and Solid Tapping


catalog number

SS100TG050719 NPA050 60-75 OEW106 SS062041GSS100TG050698G LNA050M 60-75 HSW34M SS062041G




• Tremendous Grip (TG) collet chucks provide the grip and accuracy necessary for the demands of today’s machine toolsbecause of its slow collet taper and bearing-style nosepiece.

• Unique left-hand, adjustable backup screw allows drills to bepreset and provides through-coolant capability.


• The versatility and gripping power of the TG chuck is superior to competitive designs.

ColletsSee pages

289-294.

®Toolholding SystemsTremendous Grip TG-Style Collet Chucks – Straight Shank



SS100TG050719 1/32-17/32 1-13 50TG 1.00 1.19 7.19 5.50 1.75 6.50 1.59SS100TG050698G 1/32-17/32 1-13 50TG 1.00 1.50 6.98 5.50 1.54 6.30 1.59

276276

mm

Ø

inch

OEW HSW

Alternative Tension Adjustment Springs (Tension Only Chucks)

preload(lbs./in.2)

tap chuck

SS075TOJ712 CS0563041156 2.37heavier CS0540041150 3.50

SS100TOK700 CS0600055150 7.50lighter CS0563041156 2.37

SS100TOL750 CS0600049125 3.25heavier CS0600055150 7.50

standard spring alternate spring

NOTE: Springs come in a package of two. Add “PKG” to end of part number when ordering.

Double Angle Tapping Chucks – Straight Shank (Tension Only)

Toolholding Systems

Collet Type

Key Drive – for Through-Hole Tapping on Turning Centers

• Minimum diameter for close center work.

• Tension design compensates for differences between machine feedand tap lead.

• Solid hard start ensures that the tap will start at the same pointevery time whether it is sharp or dull.

• Right-hand or left-hand tapping capability.

• Simple collet-type design.

• Alternative springs available to adjust tension pressure. Helps control thread quality under a variety of workpiece conditions.

• Positive drive collets prevent tap slippage.

• Economical to use.

*ORDERING INFORMATION:Order by catalog number.Order wrench separately.Order collets by matching serieswith corresponding chuck.Collets available on pages 285-286.Locknut included.

catalog number tension comp. d1 d2 l1 l2 l3Ø

NOTE: Through coolant not available.

#0-1/2SS075TOJ712 1/16P J .50 none .75 .81 7.12 5.13 .50 .72

M1-M12#0-5/8

SS100TOK700 1/16P-1/8P K .75 none 1.00 1.06 7.00 5.12 .48 1.86M1-M16#0-7/8

SS100TOL750 1/16P-1/2P L .75 none 1.00 1.31 7.56 3.75 .56 2.24M5-M24

277

ColletsSee pages

285-286.


catalog number

SS075TOJ712 LNA204M 32-40 OEW075SS100TOK700 LNAK04M 40-50 OEW094SS100TOL750 LNAL04M 60-75 OEW125


(ft.-lbs.)wrench*

*Chuck includes locknut. Locknut wrench must be ordered separately.**For maximum safety and performance, tighten the locknut to the specified torque value.

Collet Type

Key Drive – for Through-Hole Tapping on Turning Centers

• Minimum diameter for close center work.

• Tension/compression design compensates for differencesbetween machine feed and tap lead.


• Simple collet-type design.

• Alternative springs available to adjust tension pressure. Helpscontrol thread quality under a variety of workpiece conditions.

• Positive drive collets prevent tap slippage.

• Economical to use.

®Toolholding SystemsDouble Angle Tapping Chucks – Straight Shank (Tension and Compression)

NOTE: Through-coolant not available.

278278

catalog number tension comp. d1 d2 l1 l2 l3Ø

#0-1/2SS075TCJ731 1/16P J .56 .19 .75 .81 7.31 5.13 .50 .72

M1-M12#0-5/8

SS100TCK719 1/16P-1/8P K .56 .19 1.00 1.06 7.18 5.12 .48 1.86M1-M16#0-7/8

SS100TCL769 1/16P-1/2P L .56 .19 1.00 1.31 7.68 3.75 .56 2.24M5-M24


catalog number

SS075TCJ731 LNA204M 32-40 OEW075SS100TCK719 LNAK04M 40-50 OEW094SS100TCL769 LNAL04M 60-75 OEW125


(ft.-lbs.)wrench*


ColletsSee pages

285-286.

TG-Style Tapping Chucks – Straight Shank (Self Releasing)

Toolholding Systems

Tension Only

• Accurate depth control for tapping blind holes.

• Overriding clutch mechanism disengages when the tap reaches the required depth, enabling the tap to “free-spin” until themachine spindle is reversed.

• Tension-only design for tapping through holes.

• Solid hard start ensures that the tap will begin to cut at the samepoint every time, whether the tap is sharp or dull.

• Dependable, rugged, and compact.

• Positive drive collets prevent slippage.


279

NOTE: Through coolant not available.

catalog number stroke todisengage tension comp. d1 d2 l1 l2 l3Ø

SS100SRTG50562 #0-5/8 50TG .125 none 1.00 1.21 2.125 5.625 2.25 2.711/16P-1/8P

SS100SRTG75606 #0-7/8 75TG .125 none 1.00 1.96 2.125 6.062 2.25 3.341/16P-1/2P

SS100SRTG100700 #0-1 1/8 100TG .125 none 1.00 2.36 2.125 7.000 2.25 4.621/16P-3/4P

ColletsSee pages

289-294.


catalog number

SS100SRTG50562 NPA050 60-75 OEW106SS100SRTG75606 LNA075M 80-100 HSW45MSS100SRTG100700 LNA100M 120-150 HSW58M


(ft.-lbs.)wrench*


OEW HSW

Double Pin – Recommended for Reaming

• Holder is ideal for machining centers.

• It provides .004 movement in all directions to compensate for bothangular and parallel misalignments.

• Minimum outside diameter and overhang provide maximumtool clearance.

• Industry-standard Double Angle collets collapse 1/32".


®Toolholding SystemsDouble Angle Floating Holders – Straight Shank

280280

catalog number d1 d2 hexd2 dia. l1 l2Ø

inch mm

SS050DP308403 1/64-1/4 0,5-6 300DA .50 .69 5/8 4.03 2.50 .22SS075DP308403 1/64-1/4 0,5-6 300DA .75 .69 5/8 4.03 2.57 .50SS075DP208448 1/64-3/8 0,5-10 200DA .75 .94 7/8 4.48 2.88 .56SS100DP308403 1/64-1/4 0,5-6 300DA 1.00 .69 5/8 4.03 2.50 .89SS100DP208448 1/64-3/8 0,5-10 200DA 1.00 .94 7/8 4.50 3.00 .99SS100DP108562 1/32-9/16 1-14 100DA 1.00 1.19 1 1/8 5.62 3.50 1.24


catalog number

SS050DP308403 NPA338 20-25 OEW062 OEW050SS075DP308403 NPA338 20-25 OEW062 OEW050SS075DP208448 NPA238 32-40 OEW088 OEW062SS100DP308403 NPA338 20-25 OEW062 OEW050SS100DP208448 NPA238 32-40 OEW088 OEW062SS100DP108562 NPA139 40-50 OEW112 OEW088


(ft.-lbs.)wrench*

*Chuck includes locknut. Wrenches must be purchased separately. Use of two wrenches is recommended to prevent premature wear on float mechanism.**For maximum safety and performance, tighten the locknut to the specified torque value.

locknut shank

Double Angle Floating Holders – Straight Shank

Toolholding Systems

Full Floating – Recommended for Reaming

• Holder provides .010 float in all directions to compensate for both parallel and angular misalignments.

• Hollow design allows tool overhang to be shortened.

• Industry-standard Double Angle collets collapse 1/32".• Recommended for stationary applications.• Adjusting nut varies spring tension to compensate for

cutter weight.


281

catalog number d1 d3d2 l1 l2Ø

inch mm

SS075FC208644 1/64-3/8 0,5-10 200DA .75 .94 1.88 6.44 4.00 .80SS075FC108659 1/32-9/16 1-14 100DA .75 1.42 2.06 6.59 4.00 .85SS075FC188688 1/32-3/4 1-20 180DA .75 1.73 2.38 6.88 4.00 .86SS100FC208644 1/64-3/8 0,5-10 200DA 1.00 .94 1.88 6.44 4.00 1.43SS100FC108659 1/32-9/16 1-14 100DA 1.00 1.42 2.06 6.59 4.00 1.46SS100FC188688 1/32-3/4 1-20 180DA 1.00 1.73 2.38 6.88 4.00 1.52SS100FC188888 1/32-3/4 1-20 180DA 1.00 1.73 2.38 8.88 6.00 1.97


catalog number

SS075FC208644 NPA238 32-40 OEW088 AHSW075200SS075FC108659 LNA108M 40-50 OEW125 AHSW200475SS075FC188688 NPA188 60-75 OEW150 AHSW200475SS100FC208644 NPA238 32-40 OEW088 AHSW075200SS100FC108659 LNA108M 40-50 OEW125 AHSW200475SS100FC188688 NPA188 60-75 OEW150 AHSW200475SS100FC188888 NPA188 60-75 OEW150 AHSW200475


(ft.-lbs.)wrench*

*Chuck includes locknut. Wrenches must be ordered separately.**For maximum safety and performance, tighten the locknut to the specified torque value.

locknut adjustingnut

Roller Drive – Recommended for Reaming and Solid Tapping



catalog number

SS062RDJ519 NPA208 32-40 OEW100SS075RDJ519 NPA208 32-40 OEW100SS075RDK519 NPAK08 40-50 OEW112SS100RDJ519 NPA208 32-40 OEW100SS100RDK519 NPAK08 40-50 OEW112SS100RDL666 NPAF08 60-75 OEW162

locknut* wrench*

*Chuck includes locknut. Locknut wrench must be purchased separately.**For maximum safety and performance, tighten the locknut to the specified torque value.

• Holder floats 1/32" in all directions, 1/16" total movement to compensate for parallel misalignments.

• Holder can be used in stationary and rotating applications.• Its unique design uses rollers instead of balls to provide

friction-free movement and prolonged holder life.

• Holder is self-centering and has adjustable float tension to compensate for cutter weight.

• Holder is completely sealed to eliminate contamination, thus ensuring longer holder life.

• It is also available in popular NC shanks.

ColletsSee pages

285-286.

®Toolholding SystemsDouble Angle ’08 Style Floating Holders – Straight Shank

catalog number d1 d2 d3 l1 l2 l3

SS062RDJ519 1/16-13/32 0-1/2 H.T. J .62 1.15 1.50 5.19 3.00 1.38 .451/8 S.S.P.T.

SS075RDJ519 1/16-13/32 0-5/8 H.T. J .75 1.15 1.50 5.19 3.00 1.38 .641/16, 1/8 P.T.

SS075RDK519 7/64-19/32 0-5/8 H.T. K .75 1.19 1.81 5.19 3.00 1.19 .651/16, 1/8 P.T.

SS100RDJ519 1/16-13/32 0-1/2 H.T. J 1.00 1.15 1.50 5.19 3.00 1.38 1.151/8 S.S.P.T.

SS100RDK519 7/64-19/32 0-5/8 H.T. K 1.00 1.19 1.81 5.19 3.00 1.19 1.161/16, 1/8 P.T.

SS100RDL666 7/64-27/32 0-7/8 H.T. L 1.00 1.88 2.19 6.66 4.00 1.41 1.201/16-1/2 P.T.

282282

mminch

Ø



catalog number

SS062AF308200 NPA329 20-25 OEW075 SS031031GSS075AF308288 NPA329 20-25 OEW075 SS038031GSS075AF208305 NPA229 32-40 OEW100 SS044038GSS075AF108431 LNA108M 40-50 OEW125 SS050038G

locknut* wrench* stop screw*

*Chuck includes locknut and stop screw. Locknut wrench must be purchased separately.**For maximum safety and performance, tighten the locknut to the specified torque value.

Double Angle Adjustable Flange – Straight Shank

Toolholding Systems

AF – Recommended for Drilling

• Adjusts for parallel misalignment to compensate for machine inaccuracies.


• Unique adjustable stop screw allows drills to be preset andprovides through-coolant capability.

• Ideal for turret lathes and automatics.• Saves setup times and reduces tool breakage.


catalog numbermminch

d1 d2 l1 l2 l3 min. l3 max.Ø


SS062AF308200 1/64-1/4 0,5-6 300DA .62 .84 2.00 1.12 1.38 1.68 .17SS075AF308288 1/64-1/4 0,5-6 300DA .75 .84 2.88 2.00 1.38 2.38 .36SS075AF208305 1/64-3/8 0,5-10 200DA .75 1.16 3.05 1.93 1.47 2.50 .38SS075AF108431 1/32-9/16 1-14 100DA .75 1.42 4.31 2.40 1.80 3.80 .53

283

DA (inch) Standard

1/32 300DA0031 — — — 1/323/64 300DA0047 200DA0047 100DA0047 180DA0047 3/641/16 300DA0062 200DA0062 100DA0062 180DA0062 1/165/64 300DA0078 200DA0078 100DA0078 180DA0078 5/643/32 300DA0094 200DA0094 100DA0094 180DA0094 3/327/64 300DA0109 200DA0109 100DA0109 180DA0109 7/641/8 300DA0125 200DA0125 100DA0125 180DA0125 1/89/64 300DA0141 200DA0141 100DA0141 180DA0141 9/645/32 300DA0156 200DA0156 100DA0156 180DA0156 5/3211/64 300DA0172 200DA0172 100DA0172 180DA0172 11/643/16 300DA0188 200DA0188 100DA0188 180DA0188 3/1613/64 300DA0203 200DA0203 100DA0203 180DA0203 13/647/32 300DA0219 200DA0219 100DA0219 180DA0219 7/3215/64 300DA0234 200DA0234 100DA0234 180DA0234 15/641/4 300DA0250 200DA0250 100DA0250 180DA0250 1/4

17/64 — 200DA0266 100DA0266 180DA0266 17/649/32 — 200DA0281 100DA0281 180DA0281 9/3219/64 — 200DA0297 100DA0297 180DA0297 19/645/16 — 200DA0312 100DA0312 180DA0312 5/1621/64 — 200DA0328 100DA0328 180DA0328 21/6411/32 — 200DA0344 100DA0344 180DA0344 11/3223/64 — 200DA0359 100DA0359 180DA0359 23/643/8 — 200DA0375 100DA0375 180DA0375 3/8

25/64 — 200DA0391 100DA0391 180DA0391 25/6413/32 — — 100DA0406 180DA0406 13/3227/64 — — 100DA0422 180DA0422 27/647/16 — — 100DA0438 180DA0438 7/1629/64 — — 100DA0453 180DA0453 29/6415/32 — — 100DA0469 180DA0469 15/3231/64 — — 100DA0484 180DA0484 31/641/2 — — 100DA0500 180DA0500 1/2

Ø Øl / d

1.625 / 1.035180 series

l / d1.000 / .375300 series

l / d1.188 / .539200 series

l / d1.438 / .769100 series

284284

®ColletsDouble Angle

DA (metric) Standard

1,0 300DA010M 200DA010M — — 1,01,5 300DA015M 200DA015M — — 1,52,0 300DA020M 200DA020M — — 2,02,5 300DA025M 200DA025M 100DA025M — 2,53,0 300DA030M 200DA030M 100DA030M 180DA030M 3,03,5 300DA035M 200DA035M 100DA035M 180DA035M 3,54,0 300DA040M 200DA040M 100DA040M 180DA040M 4,04,5 300DA045M 200DA045M 100DA045M 180DA045M 4,55,0 300DA050M 200DA050M 100DA050M 180DA050M 5,05,5 300DA055M 200DA055M 100DA055M 180DA055M 5,56,0 300DA060M 200DA060M 100DA060M 180DA060M 6,06,5 — 200DA065M 100DA065M 180DA065M 6,57,0 — 200DA070M 100DA070M 180DA070M 7,07,5 — 200DA075M 100DA075M 180DA075M 7,58,0 — 200DA080M 100DA080M 180DA080M 8,08,5 — 200DA085M 100DA085M 180DA085M 8,59,0 — 200DA090M 100DA090M 180DA090M 9,09,5 — 200DA095M 100DA095M 180DA095M 9,510,0 — 200DA100M 100DA100M 180DA100M 10,010,5 — — 100DA105M 180DA105M 10,511,0 — — 100DA110M 180DA110M 11,011,5 — — 100DA115M 180DA115M 11,512,0 — — 100DA120M 180DA120M 12,012,5 — — 100DA125M 180DA125M 12,5

Øl / d

41,28 / 26,29180 series

Øl / d

25,40 / 9,53300 series

l / d30,18 / 13,69200 series

l / d36,53 / 19,53100 series

collets collapse 0,78 mm

285285285

Double Angle

Collets

J and K Series Tapping Collets (inch)

JTC6 .141 #0-#6 .539 1.188 .50 .05JTC8 .168 #8 .539 1.188 .50 .05JTC10 .194 #10 .539 1.188 .50 .05JTC12 .220 #12 .539 1.188 .50 .05JTC025 .255 #14-1/4 .539 1.188 .50 .05JTC031 .318 5/16 .539 1.188 .50 .05JTC037 .381 3/8 .539 1.188 .50 .05

pipe tap size

JTC006P .313 1/16P & 1/8P(SS) .539 1.188 .50 .051/8P(LS)

Ø l2tap sizeJ

seriesd1 l1

KTC6 .141 #0-#6 .769 1.000 .484 .13KTC8 .168 #8 .769 1.000 .484 .13KTC10 .194 #10 .769 1.000 .484 .13KTC12 .220 #12 .769 1.000 .484 .13KTC025 .255 #14-1/4 .769 1.000 .484 .13KTC031 .318 5/16 .769 1.000 .484 .13KTC037 .381 3/8 .769 1.000 .484 .13

pipe tap size

KTC006P .313 1/16P & 1/8P(SS) .769 1.000 .484 .13KTC012P .438 1/8P(LS) .769 1.000 .484 .13

Ø l2tap sizeK

seriesd1 l1

Tap Collet Sets

catalog number series contents of collet sets

SDTCSET D 5 collets - DTC6 through DTC025SFTC1SET F 14 collets - FTC025 through FTC050PSFTC2SET F 18 collets - FTC6 through FTC050PSGTCSET G 14 collets - GTC075 through GTC125PSHTCSET H 18 collets - HTC075 through HTC175PSLTC1SET L 18 collets - LTC6 through LTC050P

L Series Tapping Collets (inch)

286286

®ColletsDouble Angle

LTC6 .141 #0-#6 1.107 1.094 .562 .24LTC8 .168 #8 1.107 1.094 .562 .24LTC10 .194 #10 1.107 1.094 .562 .24LTC12 .220 #12 1.107 1.094 .562 .24LTC025 .255 #14-1/4 1.107 1.094 .562 .24LTC031 .318 5/16 1.107 1.094 .562 .24LTC037 .381 3/8 1.107 1.094 .562 .24

pipe tap size

LTC025P .563 1/4P 1.107 1.094 .562 .24LTC025P .700 3/8P 1.107 1.094 .562 .24

Ø l2tap sizeL

seriesd1 l1

DA (inch) J, K, and L Series Reamer Collets

.059 JRC0059 — — 1/16 .059

.088 JRC0088 — — 5/64 & 3/32 .088

.119 JRC0119 KRC0119 LRC0119 7/64 & 1/8 .119

.151 JRC0151 KRC0151 — 9/64 & 5/32 .151

.181 JRC0181 KRC0181 LRC0181 11/64 & 3/16 .181

.208 JRC0208 KRC0208 — 13/64 & 7/32 .208

.241 JRC0241 KRC0241 LRC0241 15/64 & 1/4 .241

.250 JRC0250 KRC0250 LRC0250 17/64 & 9/32 .250

.281 JRC0281 KRC0281 LRC0281 19/64 - 11/32 .281

.312 JRC0312 KRC0312 LRC0312 23/64 - 13/32 .312

.375 — KRC0375 LRC0375 27/64 - 15/32 .375

Øreamer

size Øl / d

1.188 / .539J series

l / d.953 / .769K series

l / d1.094 / 1.107

L series

• Collets are designed for use with Kennametal Roller Drive floating holders.

287287287

DIN 6499 form B

Collets

ER (metric) Standard

1,0 8ER010M 11ER010M 16ER010M 20ER010M — 1,01,5 8ER015M 11ER015M 16ER015M — — 1,52,0 8ER020M 11ER020M 16ER020M 20ER020M 25ER020M 2,02,5 8ER025M 11ER025M 16ER025M — — 2,53,0 8ER030M 11ER030M 16ER030M 20ER030M 25ER030M 3,03,5 8ER035M 11ER035M 16ER035M — — 3,54,0 8ER040M 11ER040M 16ER040M 20ER040M 25ER040M 4,04,5 8ER045M 11ER045M 16ER045M — — 4,55,0 8ER050M 11ER050M 16ER050M 20ER050M 25ER050M 5,05,5 — 11ER055M 16ER055M — — 5,56,0 — 11ER060M 16ER060M 20ER060M 25ER060M 6,06,5 — 11ER065M 16ER065M — — 6,57,0 — 11ER070M 16ER070M 20ER070M 25ER070M 7,07,5 — — 16ER075M — — 7,58,0 — — 16ER080M 20ER080M 25ER080M 8,08,5 — — 16ER085M — — 8,59,0 — — 16ER090M 20ER090M 25ER090M 9,09,5 — — 16ER095M — — 9,5

10,0 — — 16ER100M 20ER100M 25ER100M 10,010,5 — — — — — 10,511,0 — — — 20ER110M 25ER110M 11,011,5 — — — — — 11,512,0 — — — 20ER120M 25ER120M 12,012,5 — — — — — 12,5

collet sets 8ERS000M 11ERS000M 16ERS000M 20ERS000M 25ERS000MER8 collet set ER11 collet set ER16 collet set ER20 collet set ER25 collet set

9 pieces 13 pieces 10 pieces 12 pieces 15 pieces1 mm - 5 mm 1 mm - 7 mm 1 mm - 10 mm 2 mm - 13 mm 2 mm - 16 mm

(0,5 mm sizes) (0,5 mm sizes) (1 mm sizes) (1 mm sizes) (1 mm sizes)

Øl / d

34,0 / 26,0ER25

l / d31,5 / 21,0

ER20Ø

l / d13,5 / 8,5

ER8

l / d18,5 / 11,5

ER11

l / d27,5 / 17,0

ER16

Collet range is 0,5 mm for 8ER and11ER and 1 mm for 16ER and others.

1/16 — — 16ER0062 20ER0062 25ER0062 1/163/32 — — 16ER0094 — — 3/321/8 — — 16ER0125 20ER0125 25ER0125 1/8

5/32 — — 16ER0156 — — 5/323/16 — — 16ER0188 20ER0188 25ER0188 3/167/32 — — 16ER0219 — — 7/321/4 — — 16ER0250 20ER0250 25ER0250 1/4

9/32 — — 16ER0281 — — 9/325/16 — — 16ER0312 20ER0312 25ER0312 5/16

11/32 — — 16ER0344 — — 11/323/8 — — 16ER0375 20ER0375 25ER0375 3/8

13/32 — — 16ER0406 — — 13/327/16 — — — 20ER0438 25ER0438 7/161/2 — — — 20ER0500 25ER0500 1/2

9/16 — — — — 25ER0562 9/165/8 — — — — 25ER0625 5/8

Øl / d

34,0 / 26,0ER25

l / d31,5 / 21,0

ER20Ø

l / d13,5 / 8,5

ER8

l / d18,5 / 11,5

ER11

l / d27,5 / 17,0

ER16

ER (inch) Standard

DIN 6499 form B

288288

®Collets

ER (metric and inch) Standard Tapping Collets

metric

4,5 x 3,4 mm 16ERTC045034M — — 4,5 x 3,4 mm5,5 x 4,3 mm 16ERTC055043M — — 5,5 x 4,3 mm6,0 x 4,9 mm 16ERTC060049M — — 6,0 x 4,9 mm7,0 x 5,5 mm 16ERTC070055M — 25ERTC070055M 7,0 x 5,5 mm8,0 x 6,2 mm — — 25ERTC080062M 8,0 x 6,2 mm9,0 x 7,0 mm — — 25ERTC090070M 9,0 x 7,0 mm10,0 x 8,0 mm — — 25ERTC100080M 10,0 x 8,0 mm

inch

#8 H.T. 16ERTC8 20ERTC8 25ERTC8 #8 H.T.#10 H.T. 16ERTC10 20ERTC10 25ERTC10 #10 H.T.#12 H.T. 16ERTC12 20ERTC12 25ERTC12 #12 H.T.1/4 H.T. 16ERTC025 20ERTC025 25ERTC025 1/4 H.T.5/16 H.T. — 20ERTC031 25ERTC031 5/16 H.T.3/8 H.T. — 20ERTC037 25ERTC037 3/8 H.T.

tapsize

tapsize

l / d (mm)27,50 / 17

16ER

l / d (mm)31,50 / 21

20ER

l / d (mm)43 / 2625ER

• For DIN 371-374-376 and inch taps.

ER (inch) Tension Tapping Collets

#0 - #6 H.T. 12ERTCT6* 16ERTCT6 20ERTCT6 25ERTCT6 #0 - #6 H.T.#8 H.T. — 16ERTCT8 20ERTCT8 25ERTCT8 #8 H.T.#10 H.T. — 16ERTCT10 20ERTCT10 25ERTCT10 #10 H.T.#12 H.T. — — 20ERTCT12 25ERTCT12 #12 H.T.1/4 H.T. — — 20ERTCT025 25ERTCT025 1/4 H.T.5/16 H.T. — — — 25ERTCT031 5/16 H.T.3/8 H.T. — — — 25ERTCT037 3/8 H.T.

tapsize

T-tension

l / d26 / 2625ER8 mm

tapsize

T-tension

l / d18 / 11,4

12ER5,5 mm

l / d22 / 1716ER7 mm

l / d24 / 2120ER7 mm

* Fits 11ER chucks.

289289289

ColletsSingle Angle – Tremendous Grip

TG (metric) Standard

1,50 50TG015M — — 1,502,00 50TG020M — — 2,002,50 50TG025M — — 2,503,00 50TG030M 75TG030M 100TG030M 3,003,50 50TG035M 75TG035M 100TG035M 3,504,00 50TG040M 75TG040M 100TG040M 4,004,50 50TG045M 75TG045M 100TG045M 4,505,00 50TG050M 75TG050M 100TG050M 5,005,50 50TG055M 75TG055M 100TG055M 5,506,00 50TG060M 75TG060M 100TG060M 6,006,50 50TG065M 75TG065M 100TG065M 6,507,00 50TG070M 75TG070M 100TG070M 7,007,50 50TG075M 75TG075M 100TG075M 7,508,00 50TG080M 75TG080M 100TG080M 8,008,50 50TG085M 75TG085M 100TG085M 8,509,00 50TG090M 75TG090M 100TG090M 9,009,50 50TG095M 75TG095M 100TG095M 9,5010,00 50TG100M 75TG100M 100TG100M 10,0010,50 50TG105M 75TG105M 100TG105M 10,5011,00 50TG110M 75TG110M 100TG110M 11,0011,50 50TG115M 75TG115M 100TG115M 11,5012,00 50TG120M 75TG120M 100TG120M 12,0012,50 50TG125M 75TG125M 100TG125M 12,50

Ø ØTG 50

d1 = 19,30l1 = 36,53

TG 75d1 = 26,98l1 = 46,84

TG 100d1 = 35,03l1 = 60,33

High Precision collets available (TGHP).

TG (metric) Coolant

6,00 50TGC060M 75TGC060M — 6,008,00 50TGC080M 75TGC080M — 8,0010,00 50TGC100M 75TGC100M 100TGC100M 10,0012,00 50TGC120M 75TGC120M 100TGC120M 12,00

Ø ØTG 50

d1 = 19,30l1 = 36,53

TG 75d1 = 26,98l1 = 46,84

TG 100d1 = 35,03l1 = 60,33

Coolant High Precision collets available (TGCHP).

TG (inch) Standard

3/64 50TG0047 — — 3/641/16 50TG0062 75TG0062 — 1/165/64 50TG0078 75TG0078 — 5/643/32 50TG0094 75TG0094 100TG0094 3/327/64 50TG0109 75TG0109 100TG0109 7/641/8 50TG0125 75TG0125 100TG0125 1/8

9/64 50TG0141 75TG0141 100TG0141 9/645/32 50TG0156 75TG0156 100TG0156 5/3211/64 50TG0172 75TG0172 100TG0172 11/643/16 50TG0188 75TG0188 100TG0188 3/16

13/64 50TG0203 75TG0203 100TG0203 13/647/32 50TG0219 75TG0219 100TG0219 7/32

15/64 50TG0234 75TG0234 100TG0234 15/641/4 50TG0250 75TG0250 100TG0250 1/4

17/64 50TG0266 75TG0266 100TG0266 17/649/32 50TG0281 75TG0281 100TG0281 9/32

19/64 50TG0297 75TG0297 100TG0297 19/645/16 50TG0312 75TG0312 100TG0312 5/16

21/64 50TG0328 75TG0328 100TG0328 21/6411/32 50TG0344 75TG0344 100TG0344 11/3223/64 50TG0359 75TG0359 100TG0359 23/64

3/8 50TG0375 75TG0375 100TG0375 3/825/64 50TG0391 75TG0391 100TG0391 25/6413/32 50TG0406 75TG0406 100TG0406 13/3227/64 50TG0422 75TG0422 100TG0422 27/647/16 50TG0438 75TG0438 100TG0438 7/16

29/64 50TG0453 75TG0453 100TG0453 29/6415/32 50TG0469 75TG0469 100TG0469 15/3231/64 50TG0484 75TG0484 100TG0484 31/64

1/2 50TG0500 75TG0500 100TG0500 1/2

Ø ØTG 50

d1 = .760l1 = 1.438

TG 75d1 = 1.062l1 = 1.844

TG 100d1 = 1.379l1 = 2.375

290290

®ColletsSingle Angle – Tremendous Grip

High Precision collets available (TGHP).

291291291

Single Angle – Tremendous Grip

Collets

TG (inch) Coolant

1/8 50TGC0125 — — 1/89/64 50TGC0141 — — 9/645/32 50TGC0156 — — 5/3211/64 50TGC0172 — — 11/643/16 50TGC0188 — — 3/16

13/64 50TGC0203 — — 13/647/32 50TGC0219 — — 7/32

15/64 50TGC0234 — — 15/641/4 50TGC0250 75TGC0250 100TGC0250 1/4

17/64 50TGC0266 75TGC0266 100TGC0266 17/649/32 50TGC0281 75TGC0281 100TGC0281 9/32

19/64 50TGC0297 75TGC0297 100TGC0297 19/645/16 50TGC0312 75TGC0312 100TGC0312 5/16

21/64 50TGC0328 75TGC0328 100TGC0328 21/6411/32 50TGC0344 75TGC0344 100TGC0344 11/3223/64 50TGC0359 75TGC0359 100TGC0359 23/64

3/8 50TGC0375 75TGC0375 100TGC0375 3/825/64 50TGC0391 75TGC0391 100TGC0391 25/6413/32 50TGC0406 75TGC0406 100TGC0406 13/3227/64 50TGC0422 75TGC0422 100TGC0422 27/647/16 50TGC0438 75TGC0438 100TGC0438 7/16

29/64 50TGC0453 75TGC0453 100TGC0453 29/6415/32 50TGC0469 75TGC0469 100TGC0469 15/3231/64 50TGC0484 75TGC0484 100TGC0484 31/64

1/2 50TGC0500 75TGC0500 100TGC0500 1/2

Ø ØTG 50

d1 = .760l1 = 1.438

TG 75d1 = 1.062l1 = 1.844

TG 100d1 = 1.379l1 = 2.375

Coolant High Precision collets available (TGCHP).

TG (inch) Standard Sets

S75TG1SET 75TG 45 collets - 1/16" through 3/4" in 1/64" incrementsS75TG2SET 75TG 23 collets - 1/16" through 3/4" in 1/32" incrementsS75TG3SET 75TG 33 collets - 1/4" through 3/4" in 1/64" incrementsS75TG4SET 75TG 17 collets - 1/4" through 3/4" in 1/32" incrementsS100TG1SET 100TG 59 collets - 3/32" through 1" in 1/64" incrementsS100TG2SET 100TG 30 collets - 3/32" through 1" in 1/32" incrementsS100TG3SET 100TG 41 collets - 3/8" through 1" in 1/64" incrementsS100TG4SET 100TG 21 collets - 3/8" through 1" in 1/32" increments

catalog number collet series contents of collet sets

292292


TGST (inch) Tapping Collets

catalog number d1 Ø l1 l2 s1hand tap

size

50TGST6 #0-#6 .760 .141 1.438 .775 .110 .1050TGST8 #8 .760 .168 1.438 .775 .131 .1050TGST10 #10 .760 .194 1.438 .900 .152 .1050TGST12 #12 .760 .220 1.438 .807 .165 .1050TGST025 #14-1/4 .760 .255 1.438 .838 .191 .1050TGST031 .3125 .760 .318 1.438 .868 .238 .1050TGST037 .375 .760 .381 1.438 .900 .286 .10

pipe tap size

50TGST006P 1/16 & 1/8P (SS) .760 .313 1.438 .775 .234 .1050TGST012P 1/8P (LS) .760 .438 1.438 .775 .328 .10

hand tap size

75TGST6 #0-#6 1.062 .141 1.843 .775 .110 .2675TGST8 #8 1.062 .168 1.843 .775 .131 .2675TGST10 #10 1.062 .194 1.843 .900 .152 .2675TGST12 #12 1.062 .220 1.843 .807 .165 .2675TGST025 #14-1/4 1.062 .255 1.843 .838 .191 .2675TGST031 .3125 1.062 .318 1.843 .868 .238 .2675TGST037 .375 1.062 .381 1.843 .900 .286 .26

pipe tap size

75TGST006P 1/16 & 1/8P (SS) 1.062 .313 1.843 .775 .234 .2675TGST012P 1/8P (LS) 1.062 .438 1.843 .775 .328 .2675TGST025P 1/4P 1.062 .563 1.843 .775 .421 .2675TGST037P 3/8P 1.062 .700 1.843 .775 .531 .26

hand tap size

100TGST6 #0-#6 1.379 .141 2.375 .812 .110 .52100TGST8 #8 1.379 .168 2.375 .812 .131 .52100TGST10 #10 1.379 .194 2.375 .900 .152 .52100TGST12 #12 1.379 .220 2.375 .812 .165 .52100TGST025 #14-1/4 1.379 .255 2.375 .812 .191 .52100TGST031 .3125 1.379 .318 2.375 .868 .238 .52100TGST037 .375 1.379 .381 2.375 .900 .286 .52

pipe tap size

100TGST006P 1/16 & 1/8P (SS) 1.379 .313 2.375 .812 .234 .52100TGST012P 1/8P (LS) 1.379 .438 2.375 .812 .328 .52100TGST025P 1/4P 1.379 .563 2.375 .812 .421 .52100TGST037P 3/8P 1.379 .700 2.375 .812 .531 .52

293293293

ColletsSingle Angle – Tremendous Grip

TGST (metric) Tapping Collets

catalog number d1 l1 hand tap

size

50TGST025020M M1,M2 19,30 2,50 36,52 17,00 2,00 .1050TGST025021M M1,M1.8,M3,M3.5 19,30 2,50 36,52 17,00 2,10 .1050TGST028021M M2,M2.6,M4 19,30 2,80 36,52 17,00 2,10 .1050TGST028022M M2.2,M2.5 19,30 2,80 36,52 17,00 2,24 .1050TGST032025M M3 19,30 3,15 36,52 17,00 2,50 .1050TGST035027M M3,M5 19,30 3,50 36,52 17,00 2,70 .1050TGST036028M M3.5 19,30 3,55 36,52 17,00 2,80 .1050TGST040030M M3.5 19,30 4,00 36,52 17,00 3,00 .1050TGST040032M M4 19,30 4,00 36,52 17,00 3,15 .1050TGST045034M M4,M6 19,30 4,50 36,52 17,00 3,40 .1050TGST045036M M4.5 19,30 4,50 36,52 17,00 3,55 .1050TGST050040M M5 19,30 5,00 36,52 17,00 4,00 .1050TGST056045M 12 UNC/UNF 19,30 5,60 36,52 17,00 4,50 .1050TGST060049M M5,M6,M7,M8 19,30 6,00 36,52 17,00 4,90 .1050TGST063050M M6 19,30 6,30 36,52 17,00 5,00 .1050TGST070055M M10 19,30 7,00 36,52 17,00 5,50 .1050TGST071056M M7 19,30 7,10 36,52 17,00 5,60 .1050TGST080062M M8 19,30 8,00 36,52 17,00 6,20 .1050TGST080063M M8,M11,1/8 BSP 19,30 8,00 36,52 17,00 6,30 .1050TGST090070M M12 19,30 9,00 36,52 17,00 7,00 .1050TGST090071M M9,M12 19,30 9,00 36,52 17,00 7,10 .1050TGST100080M M10 19,30 10,00 36,52 17,00 8,00 .1050TGST110090M M14 19,30 11,00 36,52 17,00 9,00 .10100TGST080063M M8,M11,1/8 BSP 35,02 8,00 60,32 30,00 6,30 .52100TGST090071M M9,M12 35,02 9,00 60,32 30,00 7,10 .52100TGST100080M M10 35,02 10,00 60,32 30,00 8,00 .52100TGST110090M M14 35,02 11,00 60,32 30,00 9,00 .52

Ø l2 s1

TGST Collet Sets

set contentsset

catalog number

S38TGSTSET-TC/RV TC- & RV-style tap chucks (7 collets) #6 through 1/4 hand tap 1/16 NP, 1/8 NP (SS)S50TGSTSET-RV RV-style tap chucks (9 collets) #10 through 1/2 hand tap 1/16 NP, 1/8 NP (SS) & 1/8 NP (LS)S50TGSTSET-TC TC-style tap chucks (11 collets) #6 through 1/2 hand tap 1/16 NP, 1/8 NP (SS) & 1/8 NP (LS)S50TGSTSET-S solid tap chucks (13 collets) #6 through 5/8 hand tap 1/16 NP, 1/8 NP (SS) & 1/8 NP (LS)S75TGSTSET-TC TC-style tap chucks (15 collets) #10 through 3/4 hand tap 1/16 NP, 1/8 NP (SS) & 1/8 NP (LS), 1/4 NP, 3/8 NP

use with

NOTE: For through-coolant collets (sealed slots) add “C” to part number (e.g. – 50TGST C 025).

TGST (inch) Coolant Tapping Collets

294294


catalog number d1 Ø l1 l2 s1hand tap

size

50TGSTC025 1/4 .760 .255 1.438 .838 .191 .1050TGSTC031 5/16 .760 .318 1.438 .868 .238 .1050TGSTC037 3/8 .760 .381 1.438 .900 .286 .1050TGSTC043 7/16 .760 .323 1.438 .963 .242 .1050TGSTC050 1/2 .760 .367 1.438 .932 .275 .10

pipe tap size

50TGSTC006P 1/16P .760 .313 1.438 .775 .234 .1050TGSTC012P 1/8P .760 .438 1.438 .775 .328 .10

hand tap size

75TGSTC025 1/4 1.062 .255 1.843 .838 .191 .2675TGSTC031 5/16 1.062 .318 1.843 .868 .238 .2675TGSTC037 3/8 1.062 .381 1.843 .900 .286 .2675TGSTC043 7/16 1.062 .323 1.843 .963 .242 .2675TGSTC050 1/2 1.062 .367 1.843 .932 .275 .26

pipe tap size

75TGSTC006P 1/16P 1.062 .313 1.843 .775 .234 .2675TGSTC012P 1/8P 1.062 .438 1.843 .775 .328 .2675TGSTC025P 1/4P 1.062 .563 1.843 .775 .421 .2675TGSTC037P 3/8P 1.062 .700 1.843 .775 .531 .2675TGSTC050P 1/2P 1.062 .688 1.843 .775 .515 .26

hand tap size

100TGSTC025 1/4 1.379 .255 2.375 .812 .191 .52100TGSTC031 5/16 1.379 .318 2.375 .868 .238 .52100TGSTC037 3/8 1.379 .381 2.375 .900 .286 .52100TGSTC043 7/16 1.379 .323 2.375 .963 .242 .52100TGSTC050 1/2 1.379 .367 2.375 .932 .275 .52

pipe tap size

100TGSTC006P 1/16P 1.379 .313 2.375 .812 .234 .52100TGSTC012P 1/8P 1.379 .438 2.375 .812 .328 .52100TGSTC025P 1/4P 1.379 .563 2.375 .812 .421 .52100TGSTC037P 3/8P 1.379 .700 2.375 .812 .531 .52100TGSTC050P 1/2P 1.379 .688 2.375 .812 .515 .52

295

Index

AA-LSE Laydown Threading Bar . . . . . . . . . . . . . . . . . . . . . . 196A-NE Top Notch Threading & Grooving Boring Bar. . . . . . . 192A-STF Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 208A-STL Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 208A..NNT Top Notch Threading & Grooving Boring Bar. . . . . . . 191A2 KM Micro Cutting Unit A2 Blade - Cutoff . . . . . . . . . . 157A2-CF A2 Cutoff Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121A2-CM A2 Cutoff Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122A2-CR A2 Cutoff Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123A3-DF A3 Deep Grooving Insert . . . . . . . . . . . . . . . . . . . . . 115A3-DM A3 Deep Grooving Insert . . . . . . . . . . . . . . . . . . . . . 116A3-DM A3 Deep Grooving Insert (35-Degree Profiling) . . . . . 116A3-DR A3 Deep Grooving Insert . . . . . . . . . . . . . . . . . . . . . 116A3DS A3 Integral Shank Profiling Toolholder. . . . . . . . . . . . 175A3PS/A3US A3 Integral Shank Profiling Toolholder. . . . . . . . . . . . 175A3SC Square Shank Toolholder for A2 Cutoff Insert . . . . . . 176A3SM/A3SS A3 Deep Grooving and Profiling Toolholder . . . . . . . . 174ABD Micro Boring A-Series Insert. . . . . . . . . . . . . . . . . . . 132AGD Micro Boring A-Series Insert. . . . . . . . . . . . . . . . . . . 132APD Micro Boring A-Series Insert. . . . . . . . . . . . . . . . . . . 132ATBI Micro Boring Bar (A-Series) . . . . . . . . . . . . . . . . . . . 200ATD Micro Boring A-Series Insert. . . . . . . . . . . . . . . . . . . 133

BB105 Dynapoint TF Drills without Coolant . . . . . . . . . . 221-222B221 Dynapoint SE Drills without Coolant. . . . . . . . . . 226-228BB Micro Boring B-Series Insert. . . . . . . . . . . . . . . . . . . 133BNEC High-Performance Solid Carbide

End Mills (Inch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265BP Micro Boring B-Series Insert. . . . . . . . . . . . . . . . . . . 133BPGF Positive Boring Insert (Kendex Mini) . . . . . . . . . . . . . . 64BS Micro Boring Bar (B-Series) . . . . . . . . . . . . . . . . . . . 200BT10 Micro Boring Bar Accessories. . . . . . . . . . . . . . . . . . 217BT6 Micro Boring Bar Accessories. . . . . . . . . . . . . . . . . . 217BT7 Micro Boring Bar Accessories. . . . . . . . . . . . . . . . . . 217BT8 Micro Boring Bar Accessories. . . . . . . . . . . . . . . . . . 217BT9 Micro Boring Bar Accessories. . . . . . . . . . . . . . . . . . 217BW078 Micro Boring Bar Accessories. . . . . . . . . . . . . . . . . . 217

CC-CSE Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 214C-KBF Kendex Mini Boring Bar . . . . . . . . . . . . . . . . . . . . . . 187C-KBL Kendex Mini Boring Bar . . . . . . . . . . . . . . . . . . . . . . 188C-SCF Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 209C-SCL Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 210C-SG Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 211C-STF Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 212C-STL Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 213C-SWU Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 214CCGT-HP Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45CCGT-LF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45CCMT-11 Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45CCMT-FW Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45CCMT-LF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45CCMT-MF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46CCMT-MW Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46CCMT-UF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46CCMW(-F) Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

CDC General Purpose Solid Carbide Drills . . . . . . . . . . . . 238CDG Micro Boring Indexable Insert . . . . . . . . . . . . . . . . . . 135CDHB Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . 46, 134CDHH Micro Boring Indexable Insert . . . . . . . . . . . . . . . . . . 134CDT Micro Boring Indexable Insert . . . . . . . . . . . . . . . . . . 135CH110 General Purpose Solid Carbide Drills. . . . . . . . . 233-235CN130 General Purpose Solid Carbide Drills . . . . . . . . . . . . 238CNGA-(S) Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34CNGG-LF Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34CNGP Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34CNMA Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34CNMG-FF Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34CNMG-FN Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35CNMG-FP Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35CNMG-FW Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35CNMG-MN Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35CNMG-MP Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35CNMG-MW Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36CNMS(-F) Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36CPCA Micro Boring Indexable Insert . . . . . . . . . . . . . . . . . . 134CPG Micro Boring Indexable Insert . . . . . . . . . . . . . . . . . . 135CPGB(-F) Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47CPGM(-F) Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47CPGT-HP Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47CPGT-LF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47CPGT-UF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47CPGW(-F) Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48CPMT-FW Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48CPMT-LF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48CPMT-MF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48CPMT-MW Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48CPMT-UF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49CPMW(-F) Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49CPT Micro Boring Indexable Insert . . . . . . . . . . . . . . . . . . 135CR100 General Purpose Solid Carbide Drills. . . . . . . . . 230-232CRHEC High-Performance Solid Carbide End Mills (Inch) . . . 264CS120 General Purpose Solid Carbide Drills. . . . . . . . . 236-237CTS30 Micro Boring Bar Accessories. . . . . . . . . . . . . . . . . . 217CV-KM-ECTRA KM Micro Systems Tooling (Presetter) . . . . . . . . . . . 159CV-KM-TRA KM Micro Systems Tooling (Presetter) . . . . . . . . . . . 159

DDA Double Angle Collet (Inch) . . . . . . . . . . . . . . . . . . . . 284DA Double Angle Collet (Metric) . . . . . . . . . . . . . . . . . . . 284DBNEC High-Performance Solid Carbide End Mills (Inch) . . . 266DCGT-HP Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49DCGT-LF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49DCMT-11 Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49DCMT-LF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50DCMT-MF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50DCMT-UF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50DCMW(-F) Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50DHEC High-Performance Solid Carbide End Mills (Inch) . . . 263DNGA(-S) Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36DNGG-LF Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36DNGP Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36DNMG-FF Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37DNMG-FN Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37DNMG-FP Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37DNMG-FW Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

296296

®Index

DNMG-MN Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37DNMG-MP Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38DNMG-MW Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38DNMS(-F) Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38DPGT-HP Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50DPGT-LF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51DPGW-F Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51DPMT-LF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51DPMT-MF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51DPMT-UF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51DPMW(-F) Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52DRIVER Micro Boring Bar Accessories. . . . . . . . . . . . . . . . . . 217DT Torx Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162

EE-CBF Kendex Mini Boring Bar . . . . . . . . . . . . . . . . . . . . . . 187E-CBL Kendex Mini Boring Bar . . . . . . . . . . . . . . . . . . . . . . 188E-LSE Laydown Threading Bar . . . . . . . . . . . . . . . . . . . . . . 197E-NE Top Notch Threading & Grooving Boring Bar. . . . . . . 192E-SCF Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 215E-SCL Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 215E-STF Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 216E-STL Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 216E..NNT Top Notch Threading & Grooving Boring Bar. . . . . . . 191ER ER Collet (Metric) . . . . . . . . . . . . . . . . . . . . . . . . . . . 287ER ER Collet (Inch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287ERTC ER (Metric and Inch) Standard Tap Collets . . . . . . . . 288ERTCT ER (Inch) Tension Tapping Collets. . . . . . . . . . . . . . . 288

FF2AA High-Performance Solid Carbide End Mills (Metric) . . 267F2AH High Performance Solid Carbide End Mills (Metric) . . 268F2AL High-Performance Solid Carbide End Mills (Metric) . . 269F3AA High-Performance Solid Carbide End Mills (Metric) . . 267F3AH High-Performance Solid Carbide End Mills (Metric) . . 268F4AJ High-Performance Solid Carbide End Mills (Metric) . . 268F4AL High-Performance Solid Carbide End Mills (Metric) . . 269FT Torx Flag-Type Wrench . . . . . . . . . . . . . . . . . . . . . . . 162

GGPCD Micro Boring Indexable Insert . . . . . . . . . . . . . . . . . . 136

HHEC High-Performance Solid Carbide End Mills (Inch) . . . 262HHSEC High-Performance Solid Carbide End Mills (Inch) . . . 261

JJ-NE Top Notch Threading & Grooving Boring Bar. . . . . . . 193J-NE-S Top Notch Threading & Grooving Boring Bar. . . . . . . 193JRC Double Angle J-Series Reamer Collets (Inch) . . . . . . 286JTC Double Angle Tap Collet (J-Series, Inch) . . . . . . . . . . 285

KK-AA High-Performance Taps (Straight Flute, Plug) . . . . . . 253K-AA High-Performance Taps (Straight Flute,

Full Bottom) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254K-MS High-Performance Taps (Mold Hand Tap) . . . . . . . . . 252K-NI High-Performance Taps (Spiral Point, Plug). . . . . . . . 246K-NI High-Performance Taps (Spiral Flute,

Modified Bottom) . . . . . . . . . . . . . . . . . . . . . . . . . . . 247

K-NI High-Performance Taps (Spiral Flute, Full Bottom) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248

K-NI High-Performance Taps (STI Spiral Point, Plug). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249

K-NI High-Performance Taps (STI Spiral Flute, Modified Bottom). . . . . . . . . . . . . . . . . . . . . . . 250

K-NI High-Performance Taps (STI Spiral Flute, Full Bottom) . . . . . . . . . . . . . . . . . . . . . . . . . . 251

K-SS High-Performance Taps (Spiral Point, Plug) . . . . 240-241K-SS High-Performance Taps (Spiral Flute,

Modified Bottom) . . . . . . . . . . . . . . . . . . . . . . . . 242-243K-SS High-Performance Taps (Spiral Flute,

Full Bottom) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244K-SS High-Performance Taps (Spiral Flute, Pipe) . . . . . . . . 245K-TI High-Performance Taps (LHS/RHC Spiral Flute,

Plug) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255K-TI High-Performance Taps (RHS Spiral Flute,

Modified Bottom) . . . . . . . . . . . . . . . . . . . . . . . . . . . 256K-TI High-Performance Taps (RHS Spiral Flute,

Full Bottom) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257K105 Dynapoint TF Drills without Coolant . . . . . . . . . . 223-224K222 Dynapoint SE Drills without Coolant . . . . . . . . . . . . . 229KC Micro Boring Bar Kits . . . . . . . . . . . . . . . . . . . . . . . . 217KM-A2S KM Micro Cutting Unit (A2 Integral Cutoff) . . . . . . . . 156KM-A3S KM Micro Cutting Unit (A3 Deep Grooving) . . . . . . . . 155KM-BN KM Micro Systems Tooling (Blank) . . . . . . . . . . . . . . 160KM-BS KM Micro Cutting Unit (A2 Modular Cutoff) . . . . . . . . 157KM-ER KM Micro Systems Tooling (ER Collet Chuck) . . . . . . 158KM-LCM KM Micro Clamping Unit . . . . . . . . . . . . . . . . . . . . . . 141KM-LSS KM Micro Cutting Unit (Laydown Threading) . . . . . . . 155KM-MCL KM Micro Cutting Unit (Kenloc) . . . . . . . . . . . . . . . . . 144KM-MDJ KM Micro Cutting Unit (Kenloc) . . . . . . . . . . . . . . . . . 144KM-MSD KM Micro Cutting Unit (Kenloc) . . . . . . . . . . . . . . . . . 145KM-MTG KM Micro Cutting Unit (Kenloc) . . . . . . . . . . . . . . . . . 145KM-NCM KM Micro Clamping Unit . . . . . . . . . . . . . . . . . . . . . . 141KM-NCM-SEF KM Micro Clamping Unit . . . . . . . . . . . . . . . . . . 142-143KM-NCM-SF KM Micro Clamping Unit . . . . . . . . . . . . . . . . . . 142-143KM-NCM-SS KM Micro Clamping Unit . . . . . . . . . . . . . . . . . . . . . . 141KM-NE KM Micro Cutting Unit (Top Notch

Threading & Grooving) . . . . . . . . . . . . . . . . . . . . . . . 154KM-NKL KM Micro Cutting Unit (Top Notch Profiling) . . . . . . . 151KM-NRPKG KM Micro Systems Tooling

(Spares and Accessories). . . . . . . . . . . . . . . . . . . . . 161KM-NS KM Micro Cutting Unit

(Top Notch Threading & Grooving) . . . . . . . . . . . . . . 154KM-NSPKG KM Micro Systems Tooling

(Spares and Accessories). . . . . . . . . . . . . . . . . . . . . 161KM-P KM Micro Systems Tooling (Plug) . . . . . . . . . . . . . . . 160KM-RCM KM Micro Clamping Unit . . . . . . . . . . . . . . . . . . . . . . 141KM-SCG KM Micro Cutting Unit (Screw-On) . . . . . . . . . . . . . . 146KM-SCL KM Micro Cutting Unit (Screw-On) . . . . . . . . . . . . . . 146KM-SCM KM Micro Cutting Unit (Screw-On) . . . . . . . . . . . . . . 147KM-SDG KM Micro Cutting Unit (Screw-On) . . . . . . . . . . . . . . 147KM-SDJ KM Micro Cutting Unit (Screw-On) . . . . . . . . . . . . . . 148KM-SDP KM Micro Cutting Unit (Screw-On) . . . . . . . . . . . . . . 148KM-SSP KM Micro Cutting Unit (Laydown Backturning) . . . . . 152KM-STG KM Micro Cutting Unit (On-Edge Grooving). . . . . . . . 153KM-STG KM Micro Cutting Unit (Screw-On) . . . . . . . . . . . . . . 149KM-STJ KM Micro Cutting Unit (Screw-On) . . . . . . . . . . . . . . 149KM-STP KM Micro Cutting Unit (On-Edge Backturning) . . . . . 152

297

Index

KM-STT KM Micro Cutting Unit (On-Edge Threading) . . . . . . . 153KM-SVG KM Micro Cutting Unit Integral Cutoff . . . . . . . . . . . . 156KM-SVG KM Micro Cutting Unit (Screw-On) . . . . . . . . . . . . . . 150KM-SVJ KM Micro Cutting Unit (Screw-On) . . . . . . . . . . . . . . 150KM-SWL KM Micro Cutting Unit (Screw-On) . . . . . . . . . . . . . . 151KM-TIM KM Micro Systems Tooling (Timing Heads) . . . . . . . . 158KRC Double Angle K-Series Reamer Collets (Inch). . . . . . 286KT Torx Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162KTC Double Angle Tap Collet (K-Series, Inch) . . . . . . . . . 285KWCD General Purpose Solid Carbide Drills. . . . . . . . . 230-238

LLRC Double Angle L-Series Reamer Collets (Inch) . . . . . . 286LSA LT Threading Toolholder . . . . . . . . . . . . . . . . . . . . . . 173LT-ER-60CB LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 84LT-ER-ISOCB LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 88LT-ER-NPTCB LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 91LT-ER-NPTFCB LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 92LT-ER-UNCB LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 86LT-ER-WCB LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 94LT-ER/L-55 LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 93LT-ER/L-60 LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 84LT-ER/L-BSPT LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 96LT-ER/L-ISO LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 88LT-ER/L-NPT LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 91LT-ER/L-NPTF LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 92LT-ER/L-UN LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 86LT-ER/L-UNJ LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 90LT-ER/L-W LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 94LT-NR-60CB LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 85LT-NR-ISOCB LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 89LT-NR-NPTCB LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 91LT-NR-UNCB LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 87LT-NR-WCB LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 95LT-NR/L-55 LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 93LT-NR/L-60 LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 85LT-NR/L-BSPT LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 96LT-NR/L-ISO LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 89LT-NR/L-NPT LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 91LT-NR/L-NPTF LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 92LT-NR/L-UN LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 87LT-NR/L-UNJ LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 90LT-NR/L-W LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 95LTC Double Angle Tap Collet (L-Series, Inch). . . . . . . . . . 286

NNAS Top Notch Threading, Grooving, and

Backturning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172NB Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 110NBD Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 110NDC-V (NPT) Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 76NF Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 108NF-K Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 108NFD-K Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 109NFD-KI Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 109NG Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 106NG-K Top Notch Grooving Insert . . . . . . . . . . . . . . . . 104-105NG1L Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 105NGD Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 107NGD-K Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 107

NGP Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 106NJ Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 75NJF Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 75NJK Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 75NJP Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 75NKL-F Top Notch Profiling Toolholder. . . . . . . . . . . . . . . . . . 171NP-K Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 109NPD-K Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 109NPGR Top Notch Profiling Insert (Parallelogram) . . . . . . . . . . 63NPR/L Top Notch Profiling Insert (Parallelogram) . . . . . . . . . . 63NR Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 107NR-K Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 107NRD Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 108NRP Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 108NT Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 72NT-1L Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 72NT-K Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 73NTC Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 74NTF Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 73NTK Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 73NTP Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 72NU Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 110NV Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 110NWC Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 76

SS-CBF Kendex Mini Boring Bar . . . . . . . . . . . . . . . . . . . . . . 186S-CBL Kendex Mini Boring Bar . . . . . . . . . . . . . . . . . . . . . . 186S-CSE Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 207S-DT-SET Tap Collet Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285S-FT-SET Tap Collet Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285S-GT-SET Tap Collet Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285S-HT-SET Tap Collet Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285S-KBF Kendex Mini Boring Bar . . . . . . . . . . . . . . . . . . . . . . 186S-KBL Kendex Mini Boring Bar . . . . . . . . . . . . . . . . . . . . . . 186S-LSE Laydown Threading Bar . . . . . . . . . . . . . . . . . . . . . . 197S-LT-SET Tap Collet Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285S-SCF Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 201S-SCL Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 202S-SG Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 203S-SGR Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 203S-STF Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 204S-STF-E Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 206S-STL Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 205S-STL-E Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 206S-SWU Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 207S-TGSET Single Angle TG Collet Set . . . . . . . . . . . . . . . . . . . . 291S-TGSTSET Single Angle Tapping Collet Set . . . . . . . . . . . . . . . . 293S10P Swiss-Style Tooling Insert . . . . . . . . . . . . . . . . . . . . . 128SCAC Screw-On Toolholder . . . . . . . . . . . . . . . . . . . . . . . . 166SCGT-LF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52SCLC-F Screw-On Toolholder . . . . . . . . . . . . . . . . . . . . . . . . 166SCMT-11 Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52SCMT-LF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52SCMT-MF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52SCMT-UF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53SDAC Screw-On Toolholder . . . . . . . . . . . . . . . . . . . . . . . . 167SDJC-F Screw-On Toolholder . . . . . . . . . . . . . . . . . . . . . . . . 167SDPC Screw-On Toolholder . . . . . . . . . . . . . . . . . . . . . . . . 168SLEC High-Performance Solid Carbide End Mills (Inch) . . . 261

298298

®Index

SM-YE LT Shims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196SM-YI LT Shims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196SNGG-LF Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38SNGP Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38SNMG-FF Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39SNMG-FN Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39SNMG-FP Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39SNMG-FW Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39SNMG-MN Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39SNMG-MP Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40SNMG-MW Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40SNMS(-F) Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40SPGH Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53SPGT-LF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53SPMT-LF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53SPMT-MF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53SPMT-UF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54SS-AF Double Angle Adjustable Flange -

Straight Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283SS-DA Double Angle ’01-Style Collet Chucks -



Straight Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274SS-DP Double Angle Floating Holder - Straight Shank . . . . . 280SS-ER ER-Style DIN 6499 Collet Chucks -

Straight Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275SS-FC Double Angle Floating Holder - Straight Shank . . . . . 281SS-RD Double Angle ’08-Style Floating Holder -

Straight Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282SS-SRTG TG-Style Tap Chucks (Self Releasing) -

Straight Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279SS-TC Double Angle Tap Chucks (Tenn. & Compress.) -

Straight Shank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278SS-TG TG-Style Collet Chucks - Straight Shank. . . . . . . . . . 276SS-TO Double Angle Tap Chucks (Tension Only) -

Straight Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277SSP Laydown Backturning Toolholder. . . . . . . . . . . . . . . . 179STAC Screw-On Toolholder . . . . . . . . . . . . . . . . . . . . . . . . 168STG On-Edge Grooving Toolholder . . . . . . . . . . . . . . . . . . 182STJC-F Screw-On Toolholder . . . . . . . . . . . . . . . . . . . . . . . . 169STP On-Edge Backturning Toolholder. . . . . . . . . . . . . . . . 180STT On-Edge Threading Toolholder . . . . . . . . . . . . . . . . . 181SVAB Screw-On Toolholder . . . . . . . . . . . . . . . . . . . . . . . . 169SVG On-Edge Cutoff Toolholder . . . . . . . . . . . . . . . . . . . . 183SVJB-F Screw-On Toolholder . . . . . . . . . . . . . . . . . . . . . . . . 170SWLC-F Screw-On Toolholder . . . . . . . . . . . . . . . . . . . . . . . . 170

TT02P Swiss-Style Tooling Insert . . . . . . . . . . . . . . . . . . . . . 128T20G Swiss-Style Tooling Insert . . . . . . . . . . . . . . . . . . . . . 130T30T Swiss-Style Tooling Insert . . . . . . . . . . . . . . . . . . . . . 129TCGT-HP Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54TCGT-LF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54TCMT-11 Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54TCMT-LF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54TCMT-MF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55TCMT-UF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55TCMW(-F) Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

TD-P Micro Boring Indexable Insert . . . . . . . . . . . . . . . . . . 137TDHB Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . 55, 137TDHH Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . 55, 136TG Single Angle TG Collet (Metric). . . . . . . . . . . . . . . . . 289TG Single Angle TG Collet (Inch) . . . . . . . . . . . . . . . . . . 290TGC Single Angle TG Collet - Coolant (Metric) . . . . . . . . . 289TGC Single Angle TG Collet - Coolant (Inch). . . . . . . . . . . 291TGST Single Angle Tapping Collet (Inch) . . . . . . . . . . . . . . 292TGST Single Angle Tapping Collet (Metric) . . . . . . . . . . . . . 293TGSTC Single Angle Tapping Collet - Coolant (Inch) . . . . . . . 294TNGG-LF Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40TNGP Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40TNMG-FF Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41TNMG-FN Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41TNMG-FP Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41TNMG-FW Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41TNMG-MN Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42TNMG-MP Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42TNMG-MW Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42TNMS(-F) Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42TPCB Micro Boring Indexable Insert . . . . . . . . . . . . . . . . . . 137TPCG Micro Boring Indexable Insert . . . . . . . . . . . . . . . . . . 136TPCH Micro Boring Indexable Insert . . . . . . . . . . . . . . . . . . 138TPGH Micro Boring Indexable Insert . . . . . . . . . . . . . . . . . . 138TPGM(-F) Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56TPGT-HP Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56TPGT-LF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56TPGW(-F) Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56TPMT-LF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56TPMT-MF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57TPMT-UF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57TT Torx T-Handle Wrench. . . . . . . . . . . . . . . . . . . . . . . . 162TWS Torx Driver Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162TWT Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141

UUNILEVEL Micro Boring Bar Accessories. . . . . . . . . . . . . . . . . . 217

VV10G Swiss-Style Tooling Insert . . . . . . . . . . . . . . . . . . . . . 129VBGT-HP Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57VBGT-LF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57VBGW-F Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57VBMT-11 Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57VBMT-LF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58VPGP Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

WWCMT-LF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58WNGG-LF Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43WNMG-FF Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43WNMG-FN Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43WNMG-FP Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43WNMG-FW Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43WNMG-MN Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44WNMG-MP Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44WNMG-MW Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44WPGT Micro Boring Indexable Insert . . . . . . . . . . . . . . . . . . 138WPMT-LF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

299

(Please read this before usingproducts listed in this catalog.)Modern metalcutting operations involve high energy, highspindle or cutter speeds, and high temperatures and cuttingforces. Hot, flying chips may be projected from the workpieceduring metalcutting. Although advanced cutting tool materialsare designed and manufactured to withstand the high cuttingforces and temperatures that normally occur in theseoperations, they are susceptible to fragmentating in service,particularly if they are subjected to over-stress, severe impact orare otherwise abused. Therefore, precautions should be taken toadequately protect workers, observers and equipment againsthot, flying chips, fragmented cutting tools, broken workpieces orother similar projectiles. Machines should be fully guarded andpersonal protective equipment should be used at all times.

When grinding carbide or other advanced cutting tool materials,a suitable means for collection and disposal of dust, mist orsludge should be provided. Overexposure to dust or mistcontaining metallic particles can be hazardous to health,particularly if exposure continues over an extended period oftime, and may cause eye, skin and mucous membrane irritationand temporary or permanent respiratory disease. Certainexisting pulmonary and skin conditions may be aggravated byexposure to dust or mist. Adequate ventilation, respiratoryprotection and eye protection should be provided when grinding,and workers should avoid breathing of and prolonged skincontact with dust or mist. General Industry Safety and HealthRegulations, Part 1910, U.S. Department of Labor, publishedin Title 29 of the Code of Federal Regulations should be

consulted. Obtain from Kennametal and read the applicableMaterial Safety Data Sheet before grinding.

Cutting tools are only one part of the worker-machine toolsystem. Many variables exist in machining operations, including:metal removal rate; workpiece size, shape, strength and rigidity;chucking and fixturing; the load carrying capability of centers;cutter and spindle speed and torque limitations; the holder andboring bar overhang; available power, and the condition of thetooling and the machine. A safe metalcutting operation musttake all of these variables, and others, into consideration.

Kennametal has no control over the end use of its productsor the environment into which those products are placed.Kennametal urges that its customers adhere to therecommended standards of use of their metalcutting machinesand tools, and that they follow procedures that ensure safemetalcutting operations. The technical information includedthroughout this catalog, as well as recommendations onmachining practices referred to herein are only advisory innature and do not constitute representations or warranties andare not necessarily appropriate for any particular workenvironment or application.

For more information, we suggest you obtain Kennametal’sMetalcutting Safety booklet, if you do not already have one.Quantities of safety booklets and Material Safety Data Sheetsmay be obtained free from the Kennametal CorporateCompliance Office at 724-539-5747, or fax 724-539-5439.For product safety and environmental inquiries, contact ourCorporate Environmental Health and Safety Office at 724-539-5631 or fax 724-539-5372.

Metalcutting Safety

Kennametal, the block-style K, “Kennametal.The Metalcutting Authority.”, KENNA PERFECT, Kenloc, Kendex, Top Notch, A3, A2, KENNA UNIVERSAL, KC,KC9125, KC9110, KT, KT315, KC9040, KC9225, KC9315, KC8050, KC5010, KC9240, KC9245, KC5025, KD, KD100, KC5410, K, K313, KC730, KC9215, K68,KD050, KD120, KC720, K420, KMF, KC5035, KT5135, KC610, KB, KB5625, KM, KM Micro, K-Lock, Kenclamp, Wedgelock, Dynapoint, TF, SE, KC7210, K10, CS5,KC7215, K600, K-SS, K-NI, K-MS, K-AA, K-TI, KC610M, K600, KC635M, KC631M, KC633M, and KC625M are trademarks of Kennametal Inc., and are used assuch herein. The absence of a product, service name, or logo from this list does not constitute a waiver of Kennametal’s trademark or other intellectual propertyrights concerning that name or logo.

Torx is a registered trademark of the Camcar Division of Textron Inc.

Copyright 2002 by Kennametal Inc., Latrobe, PA 15650. All rights reserved.

Printed in U.S.A.A01-135-(22)E2

Kennametal Inc.Metalworking Systems DivisionP.O. Box 231Latrobe, PA 15650

APPLICATION SUPPORT TECH LINEGet the industry’s finest technical and product-application advice FREE! Our

problem-solving/troubleshooting professionals are standing by to ensure

that your Kennametal tools provide optimum performance.

USA and Canada: 800/835-3668outside USA and Canada: 724/539-6921

Monday-Friday: 7am-7pm

KENNAMETAL UNIVERSITYLearn the skills to optimize your

metalcutting performance during our unique, five-day application

engineering course! Call or visit us at

www.kennametal.com, to requestbrochure A98-181... or to find out

more about our campus and courses.

R

KENNAMETAL ONLINEVisit www.kennametal.com for instant access to the products

and technical application information that will significantly

boost your turning, milling, and holemaking productivity

and profitability - in all workpiece materials.

www.kennametal.com

Customer Service (United States and Canada) Phone

800-446-7738

PRSRT STDAUTO

U.S. POSTAGE PAIDLATROBE, PA

PERMIT NO. 64


Kennametal Ltd.6497 Edwards Blvd.Mississauga, Ontario L5T 2V2











R





www.kennametal.com

Customer Service (United States and Canada) Phone

800-446-7738


Kennametal Inc.Metalworking Systems DivisionP.O. Box 231Latrobe, PA 15650











R





www.kennametal.com

Micro Machining

Documents

micromachining solutions

micromachining needs

micro machining toolingcatalog

machining aluminum

optimal solutions

new catalog

kennametals catalog

micro grooving