READING TIP when browsing through this catalogue it is easier using two-up view (viewing the left & right side next to each other)! FOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts & Service The illustrations and photo’s in our catalogues and on our website are protected. It is illegal to copy these in any way or by any means. You are permitted to print the pages for personal use only.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
READING TIPwhen browsing through this catalogue it is easier
using two-up view(viewing the left & right side next to each other)!
FOR BEST RESULTS DO NOT
PRINT THIS PAGE!This page will interfere with the
correct page order when printing recto-verso.
Q u a l i t y P a r t s & S e r v i c e
The illustrations and photo’s in our catalogues and on our website are protected. It is illegal to copy these in any way or by any means.
You are permitted to print the pages for personal use only.
F o u r t h E d i t i o n • 19 0 . 1 5 8 Q u a l i t y P a r t s & S e r v i c e
MGC 1967-1969PARTS & ACCESSORIES CATALOGUE
fill your customer number in for easy ordering
www.angloparts.complease visit our website for all contact information
Anglo Parts ShopsMAIN BRANCH BELGIUMNETHERLANDS • ITALY • GERMANY
Authorized Anglo Parts DealersFRANCE • NETHERLANDS • SPAINSWEDEN • FINLAND • SWITZERLANDCZECH REPUBLIC • SLOVAKIALUXEMBOURG • POLAND • HUNGARY
All Rights reserved. No part of this publication may be reproduced or absorbed in any catalogue or information system by any means, Mechanical, photographic, electronic or otherwise, without prior express written consent of Anglo-Parts n.v.
Fou r t h Ed i t i on • 190 .158 • Upda t ed De cembe r 2007 • © Ang lo Pa r t s nv 2007
MGC 1967-1969PARTS & ACCESSORIES CATALOGUE
1© V a n G e s t e l B & C 2 0 0 5
IMPORTANT POINTS The general policies of our business are printed on the reverse side of our invoices and are on our web site. Updates are printed in the most recent catalogues and price lists and are updated on the web site. When you order goods from us you agree with our policies and accept them. You are always free to ask for an updated publication. The most recent will succeed all previous. Please read below, the most important points.
OUR SALESMEN We are not trained automotive technicians and can not be held responsible for errors we say or write, we are enthusiasts who like to help. For technical information, we recommend you use the books listed in this catalogue.
OUR CATALOGUES/WEBSITE We have made every effort to make sure that the information in our catalogues and on our web site is correct. We can not be held liable or responsible if any mistake or inaccuracy exists in specification, pricing or part number. We have the right to correct any error. The illustrations and photo’s in our catalogues and on our web site are only representations, products supplied may vary from illustrations and photo’s, but will function the same way with similar quality.
OUR PART NUMBERS & PRICES All parts ( or sets of parts ) have our own part number and refer to one item only. THE QUANTITY REQUIRED (“QTY”) stands for the quantity used for particular application. The quantity you order can be different and should be marked when you order. Parts not available new, might be available in second hand condition. These second hand parts are not always listed on the web site or in our price lists. Information will be sent to you on request. Prices shown on the web site and in the price lists are for one item and information only and are subject to change without prior notice. Prices on the web site can be seen with or without VAT depending on your choice. Price lists supplied with the catalogues can exclude or include local VAT, this is indicated on each price list. Part numbers are made from six figures. The first three figures will indicate the nature of the part. For example 161 stands for nuts, 162 for screws, 163 for washers, etc. The condition of the part we sell is indicated on the web site and in the price list. The following codes will appear on the web site in the catalogue parts lists and on the price lists supplied with catalogues, near the number, for the parts which are.. SH - Second Hand, EX - supplied on an EXCHANGE BASIS, and a SURCHARGE will be invoiced. NA - Currently NOT AVAILABLE. LH - Left Hand or RH - Right Hand. Always viewed from the drivers seat. LHD - left Hand Drive, RHD Right Hand Drive, A/R - AS REQUESTED, means the quantity required can vary from application to application. USE - the part number has been replaced by an other part number indicated.
ORDERS Orders are welcome through the WEB SITE, E-MAIL, FAX, LETTER, TELEPHONE or by visiting a Anglo-Parts branch. For orders not made through our Web site, can we please ask you to prepare the following, using our ORDER FORM. - Your CUSTOMER NUMBER, name, address, telephone number work/home, fax number, codice fiscal (for Italian customers only) or VAT number for European companies. - Specify if shipping address is different. - CAR TYPE INFORMATION, make, model, year build etc. - Provide Anglo Parts PART NUMBERS only. - Indicate the quantity desired and parts description. - Indicate method of payment: VISA, MASTER CARD, EURO CARD or advance payment by bank. - Once an order placed, we put this in the computer system and the processing of labels, lists and checking lists will follow. Changing an order already placed, will hold up the whole system and automatically cause delays, we therefore ask for your help by checking your order twice prior to send it to us. This will help us deliver the parts in time. Thank you for your understanding.
PAYMENTS CREDIT CARDS: At this time of writing, we accept the following credit cards: VISA, MASTER CARD, EURO CARD. Please supply credit card number (mostly 16 figures), expiring date and name as appears on the card. BANK: When your merchandise is being picked, packed in boxes, weighed and sized, the invoice will be made and we inform you of the total amount to be paid, invoice (Not for Web site) number and our bank references. Please note the invoice number and your customer number with any payment you do.
SHIPMENT NATIONAL: We deliver door to door and goods including the transport costs must be paid at delivery C.O.D., if a credit card was not used. INTERNATIONAL: We ship UPS prepaid, for small parcels. The only cost still to be paid at reception might be your local TAX. For large or heavy parcels we use an economical and fast transport method. ANGLO PARTS packs its boxes very well and the risk of receiving damaged goods is very small, however the following must be noted. Anglo Parts will not be held responsible for goods lost or damaged in transit. For shortage or damage claims not caused by the transporter, a claim must be made within three days of receipt of the order. All packing materials should be retained. Transport of glass in not insurable and will be transported at your own risk.
RECEIVING YOUR GOODS For all shipments, by arrival, please check that no seal or tape is broken and the package is not damaged. In case of any damage or shortage, write this on the carrier’s sheet in accordance with the actual condition and quantity of contents BEFORE you sign the freight bill or receiving note. Keep your copy attached with the invoice and make a claim to the transport company immediately. In any case, save the packing material until everything is settled. Anglo Parts checks goods while picking from stock and again while packing but the final check must be made by the customer himself at arrival. Make sure that the parts received match the ones you ordered and that mechanical parts function correctly. Do not wait with checking the goods until you actually need them and report problems within three days of receiving the goods.
WARRANTY Almost all parts made for the classic car industry are made in small quantities by companies who are willing to do this at an acceptable price. We at Anglo Parts check the goods for approval but we are not able to inspect each individual product. It is the responsibility of the user to make the final inspection of the part PRIOR TO fitting. Especially mechanical parts must be checked to make sure they are in perfect working condition. The warranty period starts from the invoice date, not from the installation date. Our parts carry normal and reasonable warranty but claims will be limited to the value of the component and in no case should cover labour, transport, failure of related component, failure resulting from faulty installation or parts being used for rally or competition. All products for warranty claim must be returned to the shop where you bought it by using the following procedures: the value must be over 8 euro, the goods must be sent back with shipping and taxes prepaid, all parts must be returned clean and well packed, once you or a third person has disassembled the part, our responsibility for it has ended. Anglo Parts will make the final decision of whether the unit was inherently defective or damaged during installation. We shall investigate this offer when we have received the goods back from you in undamaged condition. During the return these goods may not be damaged by poor packing or by transport. The warranty period for reconditioned parts is limited to 6 months and 4 months for rebuilt shock absorbers, most other parts are warranted against defects in material and workmanship by the original equipment manufacturer or by Anglo Parts nv for a period of one year starting with the date on the invoice.
RETURNS If you received an incorrect item, and the mistake is yours, we are willing to restock this item and we will credit the value of the goods less a 15% restocking charge. No returns will be accepted without your invoice copy, after 30 days from the invoice date, for bearings, pistons, piston rings, goods by meter, trim parts ( hoods, soft tops, tonneau covers, seat kits, panels etc.) books or any parts where installation has been attempted. Goods must be returned transport and taxes prepaid. Anglo Parts is not able to refund the taxes paid in the country of arrival, shipping or packing charges and commission we had to pay to the credit card company. You can use the value of this credit note again in a future order of the same value. We do not refund the value of credit notes.
SURCHARGE - CORE DEPOSITS A surcharge will be added on the price for parts offered on an exchange basis. The surcharge price can be seen on the web site in the catalogue parts lists and is listed in our price list near the part number related and will be invoiced pending the return of the old reservicable unit. This surcharge will be refunded in full providing that we receive the unit complete, clean, drained of oil and returned within two months of our invoice date. Please also provide a copy of our invoice. All returns must be sent back with full shipping charge prepaid. If you export the old unit to us, a letter should be sent to us with your name, address, telephone number, date of sending and description of the goods you are returning, including the surcharge value. Please make some copies and stick one on the parcel, one into the packing and keep one for yourself. We will need this information for importing the goods. Upon its arrival we will immediately check the following points: is the packing well done and has there been any damage during the transport, is the old unit similar to the type of unit we have sent to you (correct original), is the unit complete and are the essential parts rebuildable. Please do not send a MGA wiper motor for exchange with a TD wiper motor, do not send a distributor without the advance system. In this latter sample we will refund the surcharge for the distributor less the value (in our opinion) of the advance system.
BACK ORDERS Goods which are not in stock at the time of your order will be kept in back order. We will inform you when these are available again and parts will be reserved for you for a period of fourteen days starting from the day you were informed. If you do not contact us within this period, we will put the part(s) back in our stock to be sold to other customers. By ordering you can also specify “No Back orders” or ask us to cancel all previous back orders. When a part you had on back order becomes obsolete, we will let you know as well. If you decide to take this part in used condition, please ask us and we will do our best to obtain it, if possible.
Important information
© V a n G e s t e l B & C 2 0 0 52
BELANGRIJKE PUNTENDe verkoopsvoorwaarden zijn op de achterzijde van de fakturen gedrukt en bevinden zich op onze web site. Aanpassingen worden in de recentste katalogus of prijslijst gezet en op onze web site bijgewerkt. Als u bij ons bestelt, gaat u akkoord met onze verkoopsvoorwaarden (en aanvaardt u ze). U mag altijd een nieuwe publikatie aanvragen. De recentste publikatie zal alle vorige vervolledigen en vervangen. Gelieve de belangrijkste punten hieronder vermeld te lezen.
ONZE VERKOPERSWe zijn geen getrainde technici en zijn niet aansprakelijk voor fouten die we zeggen of schrijven. We zijn autofanaten die u willen helpen. Voor technische uitleg bevelen we u de boeken uit de lijst in de katalogus aan.
ONZE KATALOGIGeen inspanning was ons te groot de juiste informatie in onze katalogi en op onze web site te zetten. We kunnen niet aansprakelijk gesteld worden voor fouten of onnauwkeurigheden i.v.m. de specifiëring. de prijsbepaling of de onderdeelnummers. We hebben het recht een fout te verbeteren. De Illustraties en foto’s in onze katalogen en op onze web site zijn slechts voorstellingen en er kunnen qua vorm kleine verschillen optreden, maar de geleverde produkten blijven qua kwaliteit en bestemming hetzelfde.
ONZE ONDERDEELNUMMERS EN PRIJZENAlle onderdelen (of sets van onderdelen) kregen van ons een stuknummer. De vereiste hoeveelheid (QT) staat voor de hoeveelheid voor afzonderlijk gebruik. De hoeveelheid die u vraagtkan verschillen en moet naast elk nummer van het onderdeel. dat u bestelt, vermeld staan. Gelieve te verwijzen naar onze recentste prijslijsten om de leverbaarheid te garanderen. Onderdelen die niet leverbaar zijn, kunnen soms tweedehands geleverd worden. Deze tweedehands onderdelen staan niet altijd in onze prijslijsten en op onze web site. De prijzen in onze prijslijsten en op onze web site zijn prijzen per stuk en staan er alleen ter informatie. Ze kunnen plots veranderen naargelang de stijging of daling van de inkoopprijs. Ze kunnen zonder of met B.T.W. vermeld staan. Dit is op elke prijslijst aangeduid. De stuknummers bestaan uit zes cijfers. De eerste drie cijfers geven de aard van het stuk aan. 161 staat bijvoorbeeld voor moeren, 162 voor schroeven, 163 voor platte rondellen. De staat van het onderdeel wordt in de prijslijst en op de web site vermeld of kan worden herkend aan het nummer. De volgende kodes zullen in de prijslijst en op de web site naast het nummer voor stukken, die niet nieuw geleverd worden, staan: SH = tweedehands, EX = geleverd op ruilbasis en een supplement zal worden aangerekend. NA = op het ogenblik niet beschikbaar. LH = links of RH = rechts. Bekeken vanuit de bestuurderszit. LHD = bestuurder aan linkerkant of RHD = bestuurder aan de rechterkant. A/R = Zoals vereist. Dit betekent dat de vereiste hoeveelheid naargelang de toepassing kan verschillen. USE = het stuknummer wordt door het aangegeven nummer vervangen.
BESTELLINGENU kan altijd bestellen via onze web site, per e-mail, fax, brief, telefoon, of gewoon in de winkel. Voor bestellingen die niet langs onze web site gebeuren gelieve rekening te houden met de volgende gegevens, wanneer u ons bestelformulier gebruikt: - uw klantennummer, naam, adres, telefoonnummer werk/thuis, faxnummer, VAT(BTW)-nummer voor bedrijven; - specifieer als het leveringsadres verschilt; - informatie over de auto, merk, model, bouwjaar, enz.; - gebruik zoveel mogelijk onze onderdeelnummers. Dit zal de behandeling van uw bestelling vergemakkelijken; - geef het aantal stukken aan en beschrijf de onderdelen; - duid de betaalwi jze aan: Bank (voorafbetaling), VISA, EUROCARD of MASTER CARD. - Eens uw beselling geplaatst, zetten we deze in de computer. Automatisch volgen dan de etiketten, de picking lists en de checking lists. Als u een geplaatste bestelling wil wijzigen, kan deze het hele systeem in de war sturen en, op die manier fouten of vertragingen veroorzaken. Daarom vragen we u de bestelling goed na te kijken, vóór u ze plaatst. Dit zal ons helpen de onderdelen op tijd te leveren. We danken u voor uw begrip.
BETALINGENKredietkaart: Op het tijdstip van publikatie aanvaarden we volgende kredietkaarten: VISA, EUROCARD, ACCES CARD, MASTERCARD. Gelieve het rekeningnummer, de vervaldag (en kode indien aangegeven) en de kaarthoudersnaam te vermelden.Bank: (Niet voor bestellingen via onze web site) Als de goederen bijeengebracht, ingepakt, gewogen en gemeten zijn, zal het faktuur opgesteld worden en zullen we het totale te betalen bedrag, het faktuurnummer en onze bankgegevens meedelen. Gelieve het faktuurnummer en het klantennummer op elke betaling te noteren. (De betaling dient te gebeuren zonder bankkosten voor de begunstigde.)
VERZENDINGNationaal: We leveren bij u thuis, en de goederen, transportkosten inbegrepen, moeten bij levering C.O.D. betaald worden, als u geen kredietkaart gebruikt.Internationaal: We verzenden via UPS (United Parcel Services) voor kleine pakken, waarbij de transportkosten voorafbetaald zijn. Bij ontvangst betaalt u nog alleen de TAX indien u
in een niet EEG land woont. Voor grote en zware pakken gebruiken we een goedkope en snelle transportmethode. Anglo Parts pakt zijn goederen goed in en het risiko op beschadiging is zeer klein. Toch moet u met het volgende rekening houden. Anglo Parts kan niet aansprakelijk gesteld worden voor verloren of beschadigde goederen tijdens het transport. Klachten over verlies en schade, die niet door de vervoerder veroorzaakt werden, moeten binnen drie dagen na de ontvangst van de bestelling ingediend worden. Al het verpakkingsmateriaal moet ter verifikatie bijgehouden worden. Het vervoer van glas is niet verzekerbaar en gebeurt op risiko van de koper.
ONTVANGST VAN DE GOEDERENGelieve bij de ontvangst van elke verzending na te kijken of zegels en plakbanden niet stuk zijn en het pak niet beschadigd is. In geval van beschadiging of verlies, schrijft u dit op de vrachtbrief in overeenstemming met de aktuele toestand en hoeveelheid van de inhoud van uw verzending, voordat u het ontvangstbewijs tekent. Bewaar uw kopie bij het faktuur en dien onmiddellijk bij de transportfirma een klacht in. Hou in elk geval de verpakking tot de zaak geregeld is. Bij Anglo Parts kontroleren twee personen de goederen, de eerste keer tijdens het bijeenbrengen en de tweede keer bij het verpakken van de goederen om zeker geen fouten te maken. Uiteindelijk moet de klant zelf de allerlaatste kontrole bij ontvangst uitvoeren. Vergewis er u van dat u alle gefaktureerde goederen ontvangen heeft en dat alle mechanische goederen werken. Wacht niet met de kontrole van de goederen tot u ze werkelijk nodig heeft en meld problemen binnen drie dagen na ontvangst.
DE WAARBORGBijna alle onderdelen voor klassieke wagens worden in kleine hoeveelheden gefabriceerd door bedrijven, die dit voor een aanvaardbare prijs doen. Anglo Parts probeert zoveel mogelijk zelf de goederen na te kijken, maar we kunnen niet elk produkt kontroleren. Vóór de montage moet de gebruiker de Iaatste kontrole zelf uitvoeren. Vooral de mechanische produkten moeten worden nagekeken om er zeker van te zijn dat ze in de beste staat verkeren. De garantieperiode begint vanaf de faktuurdatum, niet vanaf de datum van plaatsing. De waarborg op onze onderdelen is normaal en redelijk, maar de klachten zijn beperkt tot de waarde van het komponent en dekt in geen geval: uurloon, transportkosten, fouten bij een komponent dat eraan vastzit, fouten als gevolg van een slechte plaatsing of onderdelen die voor rally of kompetitie gebruikt worden. Bij klachten i.v.m. de waarborg moeten alle produkten naar de winkel van aankoop teruggebracht worden. Daarbij moet u de volgende punten in acht nemen: -de waarde moet groter zijn dan 7,5 Euro -de verzendingskosten en taksen moeten bij terug-zending van de goederen voorafbetaald zijn; -alle goederen moeten schoon en goed verpakt teruggestuurd worden. Zodra U of derden het onderdeel uit elkaar hebben gehaald, zijn we niet meer aansprakelijk. Uiteindelijk beslist Anglo Parts zelf of het gaat over een intrinsiek defekt aan de eenheid, of het defekt bij plaatsing veroorzaakt werd. Goederen beschadigd door slechte verpakking of transport tijdens de terugzending komen niet in aanmerking voor onderzoek.
TERUGZENDENWanneer U een verkeerd onderdeel als gevolg van uw foute bestelling ontvangen hebt, zijn we bereid het terug te nemen tegen de waarde van het goed voor onderdelen met een waarde van minimum 7,5 Euro. We rekenen u wel 15 % heropnamekosten aan. We aanvaarden geen terugzendingen: zonder een kopie van het faktuur, 30 dagen na de faktuurdatum, van lagers, zuigers, zuigerringen, goederen per lopende meter, bekledingsonderdelen (linnen kappen, hoofdsteunen, dekzeilen, zetelovertrekken, panelen, enz.) of elk ander goed waarbij men met de plaatsing wou beginnen. Bij terugzending moeten de taksen en transportkosten voorafbetaald zijn. Anglo Parts kan u, verpakkings-of verzendingskosten van het land van ontvangst en de kommissie, die we aan de kredietkaarteninstelling moesten betalen, niet vergoeden. De uitbetalling geschied via een waardebon.
SUPPLEMENTEen supplement komt bovenop de prijs voor onderdelen, die op ruilbasis worden aangeboden. Dit supplement staat in de prijslijst en op onze web site naast het betrokken onderdeelnummer en zal gefaktureerd worden in afwachting van de terugzending van de oude, ingeruilde eenheid. Dit supplement wordt terugbetaald wanneer we de eenheid volledig, schoon, zonder olie en twee maanden na de faktuurdatum terugkrijgen. Gelieve ook een kopie van ons faktuur toe te voegen. De verzendingskosten moeten volledig door u voorafbetaald worden. Indien u ons de oude eenheid terugstuurt, vragen we u een brief te sturen met uw naam, adres, telefoonnummer, verzendingsdatum en beschrijving van de goederen, het supplement inbegrepen. Gelieve enkele kopieën te maken waarvan één exemplaar op het pak te bevestigen, één in het pak te steken en één zelf te bewaren. We hebben ze nodig bij de invoer van de goederen. Bij de aankomst van de goederen kijken we onmiddellijk de volgende punten na: - Is het stuk goed verpakt ? - Werd het tijdens het transport beschadigd ? - Komt de oude eenheid met het type, dat we u zonden, overeen (het juiste origineel) ? - Is de eenheid volledig en zijn de essentiële onderdelen nog reviseerbaar ? Gelieve geen MGA ruitenwissermotor te sturen voor ruil met een TD ruitenwissermotor of zend ons geen motor met een gebroken krukas. In dit laatste geval zullen we alleen de stukwaarde min de waarde (volgens onze beoordeling) van de krukas terugbetalen.
BACK ORDERSDe goederen, die we op het tijdstip van uw bestelling niet in voorraad hebben, houden we in “back order”. We laten u dan weten wanneer we ze u opnieuw kunnen leveren. We reserveren de onderdelen voor u voor een periode van veertien dagen (vanaf het ogenblik waarop we onze brief gepost hebben). Indien u ons binnen die periode niet gekontakteerd hebt zijn deze onderdelen niet meer voor U gereserveerd. Als u bestelt, kan u altijd specifiëren “geen back orders” of ons vragen alle vorige te annuleren. Als een onderdeel in “back order” niet meer kan worden geleverd, laten we u dit ook weten. Als u dan beslist dit onderdeel tweedehands te kopen, gelieve dit te vragen en we zullen al het mogelijke doen het onderdeel te vinden.
Belangrijke informatie
3© V a n G e s t e l B & C 2 0 0 5
Les illustrations dans ce catalogue ne sont que des représentations. Les produits fournis peuvent être différents en ce qui concerne la forme, mais la qualité et le but restant pareils.
LES POINTS IMPORTANTS Les conditions de vente sont imprimées au verso des factures et les modifications sont mentionnées dans la catalogue la plus récent et dans la liste de prix. Si vous commandez chez nous, vous êtes d’accord avec nos conditions de vente (vous le acceptez). Vous pouvez toujours demandez une nouvelle publication. L’édition complètera et remplacera toutes les précédentes. Vieillez lire les points les plus importants, mentionnés ci-dessous.
NOS VENDEURS Nous ne sommes pas des techniciens bien expérimentés et nous ne somme pas responsable des erreurs que nous disons ou écrivons. Nous sommes des enthousiastes et voulons vous aider. Pour une explication un peu plus technique, nous vous recommandons les livres de la liste de notre catalogue.
NOS CATALOGUES Nous nous sommes efforcés à mettre dans notre catalogue des information correctes. Nous ne pouvons pas être rendu (civilment) responsables d’erreurs ou d’inexactitudes concernant la spécification, l’estimation, ou les numéros de pièce. Nous avons le droit de corriger une faute.
NOS NUMEROS DE PIECE ET LES PRIX Nous avons donné à chaque pièce (ou sets de pièces) un numéro. La quantité requise (QT) se réfère à la quantité pour un usage particulier. La quantité que vous demander peut être différente et doit se trouver à côté de chaque numéro de pièce que vous commandez. Veuillez vous référer à nos listes de prix le plus révicentes pour garantir la disponibilité. Des pièces non disponibles peuvent être fournies en occasion. Ces pièces en occasion ne se trouvent pas toujours dans nos listes. Les prix dans nos listes de prix sont des prix par pièce et s’y trouvent seulement à titre informatif. Ils peuvent varier selon l’augmentation ou la baisse des prix d’achat. Ils peuvent être mentionnés sans ou avec la T.V.A. Ceci est indiqué dans la liste de prix. Les numéros de pièce se composent de chiffres. Les trois premiers chiffres indiquent la nature de la pièce. 161 se réfère par example à écrous, 162 à boulons, 163 à rondelles plates. L’état de la pièce est mentionné dans la liste de prix ou peut être reconnu au numéro. Les codes suivants se trouvent dans la liste à côté du numéro de pièces qui ne sont pas livrées comme nouvelles. SH = en occasion, EX - fourni sur base d’échange et on vous comptera un supplément. NA - pas disponible en ce moment. LH - gauche ou RH - droite. Vu du point de vue du siège du conducteur. LHD - le conducteur à gauche. RHD - le conducteur à droite. A/D - comme requis. Cela signifie que la quantité requise peut être différents selon l’application. USE - le numéro de pièce a été remplacé par le numéro indiqué.
LES COMMANDES Vous pouvez toujours commander par courrier, par téléphone, par téléfax, ou bien au magasin. Veuillez tenir compte des données suivantes si vous employez notre bon de commande: - votre numéro de client, votre nom, votre adress, votre numéro de téléphone travail/privé, votre numéro de fax, le numéro de T.V.A. pour les entreprises; - spécifiez si l’adress de livraison est différente; - informations sur la voiture: la marque, le modèle, l’année de construction, etc.; - utilisez autant que possible nos numéros de pièce. De cette manière, nous pouvons traiter vos commandes plus rapidement; - donnez le nombre des pièces et décrivez les; - indiquez le moyen de paiement: Banque, paiement à l’avance, VISA, EUROCARD, MASTER CARD. Une fois votre commande passée, nous l’introduisons dans l’ordinateur. Les étiquettes, les “picking lists” et les “checking lists” suivent automatiquement. Si vous voulez modifier une commande passée, vous risquez de confondre tout le système et, de cette manière, causer des erreurs ou des retards. C’est pourquoi nous vous demandons de bien contrôler votre commande avant de la passer. Cela nous aidera à livrer les pièces à temps. Nous vous remercions pour votre aide.
LES PAIEMENTS La carte de crédit: Au moment de la publication, nous acceptons les cartes de crédits suivantes: VISA, ACCESSCARD, MASTERCARD. Veuillez mentionner le numéro de compte, l’échéance (et le code si indiqué) et le nom du titulaire de carte. La Banque: Si les produits ont été ramassés, emballés, pasés et mesurés, on rédigera la facture et nous communiquerons le montant total à payer, le numéro de la facture et nos données bancaires. Veuillez noter pour chaque paiement le numéro de client. (Le paiement doit arriver sans frais bancaires pour le bénéficiaire.)
L’EXPEDITION National: nous livrons chez vous, et les produits, frais de transport inclus, doivent être payés COD à la livraison si vous n’utilisez pas de carte de crédit. International: nous expédions par U.P.S. (United Parcel Services). Il faut payer d’avance les frais de transport pour les petits paquets. À la réception, vous ne payerez plus que la TAXE si vous n’habitez pas dans un pays de la CEE. Pour les paquets plus grands, nous utilisons une méthode plus rapide et moins chère. Anglo Parts emballe bien les produits et la risque d’endommager est très petit. Il faut cependant tenir compte de ce qui suit. Anglo Parts ne peut être rendue responsable produits endommagés ou perdus pendant le transport. Il faut introduire les plaintes de pertes ou dégats dans trois jours après la réception de la commande. Il faut garder le matériel d’emballage pour vérification. Nous n’assurons pas le transport de verre et le transport se passe au risque de l’acheteur.
LA RECEPTION DES PRODUITS Veuillez contrôler à la réception de chaque envoi si les cachets et les scathes sont cassés si le paquet n’est pas endommagé. En cas de pertes ou dégâts, vous l’inscrivez sur la connaissement en concordance avec l’état actuel et le quantité de votre envoi avant de signer le reçu. Gardez la copie avec la facture et introduisez immédiatement une plainte chez le transporteur. Gardez en tout cas l’emballage jusqu’à ce que les problèmes soient résolus. Chez Anglo Parts, deux personnes vérifient les produits, d’abord au ramassage et ensuite à l’emballage des produits pour éviter des erreurs. Finalement, le client même doit vérifier et dernier lieu les produits à la réception. Vérifiez si vous avez reçu tous les produits et si tous les produits mécaniques fonctionnent. Ne reportez pas le contrôle jusqu’au moment où vous en avez besoin, et rapportez les produits dans trois jours après la réception.
LA GARANTIE Presque toutes les pièces de voitures classiques sont fabriquées par des entreprises qui le font à un prix raisonable. Anglo Parts essaie, autant que possible, de contrôler elle-même les produits, mais nous ne pouvons pas contrôler chaque produit. Avant le montage, le client doit effectuer lui-même le dernier contrôle. Il faut vérifier les produits mécaniques pour être sûr qu’ils se trouvent en bon état. La période de garantie commence à partir de la date de la facture, et pas à partir de la date de l’installation. La garantie de nos pièces est normale et raisonnable, mais les plaintes sont limitées à la valeur de l’élément et ne couvre en aucun cas le salaire à l’heure, le transport, les défauts d’un élément relatif, les défauts à la suite d’une mauvaise installation ou les pièces qui sont utilisées pour les “rally” ou les competitions. En cas de plainte concernant la garantie, il faut rapporter tous les produits au magasin d’achat en tenant compte des points suivants: - la valeur doit dépasser 7,5 Euro les frais d’expédition et les taxes doivent être payés d’avance au renvoi des produits; - il faut renvoyer les produits propres et bien emballés. A partir du moment où une tierce personne a démonté les pièces, nous ne sommes plus responsables. Finalement, Anglo Parts décide elle-même s’il s’agit d’un défaut inhérant à l’unité ou bien d’un défaut dû à l’installation. Les produits endommagés par un mauvais emballage ou un transport inadéquat pendant le renvoi ne seront pas pris en considération de vérification.
LA REEXPEDITION Si vous avez reçu une fausse pièce à la suite de votre commande incorrecte, nous sommes prêts à reprendre la pièce contre la valeur du produit, moins 15% des frais de reprise. Veuillez noter que les pièces doivent avoir une valeur de minimum 7,5 Euro. Nous n’acceptons pas de réexpédition sans une copie de la facture, trente jours après la date de la facture, des produits au mètre, des anneaux-pistons, des pièces de rechange de garniture intérieur (comme des capotes, des moquettes, des velours, des couvres toneau) ou de toute pièce dont l’installation a déjà été commencée. A la réexpédition, tous les frais de transport et les taxes doivent être payés d’avance. Anglo Parts ne peut pas rembourser les frais d’emballage et d’expédition du pays de réception, ainsi que la provision qu’elle a dû payer aux carte crédits. Nous vous remboursons ce montant avec un “Gift Certificate”.
LE SUPPLEMENT Un supplément s’ajoute au prix pour les pièces qui seront offertes sur bases d’échange. Ce supplément se trouve dans la liste de prix à côté de numéro de pièce y relatif et sera facturé en attente de renvoi de la vieille unité échangée. Ce supplément sera remboursé quant nous recevrons, deux mois après la date de la facture, l’unité entière, propre et sans huile. Veuillez aussi y ajouter une copie de notre facture. Il faut que vous payiez les frais d’expédition d’avance. Si vous nous renvoyez la vieille unité, nous vous demandons d’envoyer une lettre avec votre nom, votre adress, votre numéro de téléphone, la date d’expédition et la description du produit, le supplément inclus. Veuillez faire quelques copies, dont vous en attachez une au paquet, dont vous en mettez un dans le paquet et dont vous en gardez une pour vous-même. Nous en avons besoin à l’importation des produits. A l’arivée des produits, nous vérifions les points suivants: - la pièece, est-elle bien emballé? - A-t-elle été endommagée pendant le transport? - le vieille unité, correspond-t-elle au type nous vous avons envoyé (l’original)? - l’unité, est-elle complète et les pièces essentielles sont-elles encore révisables? Veuillez ne pas envoyer de moteur d’essuie-glace au lieu d’un moteur Spitfire ou ne envoyez pas un moteur avec un arbre-coude cassé. Dans ce dernier cas, nous ne rembourserons que la valeur de la pièce moins le valeur de l’arbre-coude (selon notre estimation).
LES “BACK ORDERS” Les produits que nous n’avons pas en stock au moment de votre commande sont gardés en “back order”. Nous vous laissons savoir quand nous pouvons à nouveau vous les livrer. Nous vous réservons les pièces pendant une période de 15 jours (à partir du moment où nous avons posté notre lettre). Si vous nous contactez pas pendant cette période, les pièces ne vous sont plus réservées. Si vous commandez, vous pouvez toujours spécifier “pas de back orders”, ou bien nous demander d’annuler tous les “back orders” précédents. Si nous ne pouvons plus livrer une pièce en “back order”, nous vous le laissons savoir. Si vous décidez d’acheter cette pièce en occasion, veuillez le demander et nous ferons notre possible pour la trouver.
Informations importantes
© V a n G e s t e l B & C 2 0 0 54
Wichtige Auskünfte1. EINFÜHRUNG
Die Abbildungen in diesem Katalog oder auf unserer Webseite sind nicht exakt oder maßstabsgerecht. Die tatsächlichen Teile können geringfügig von den Abbildungen abweichen, die Qualität und die Verwendbarkeit werden jedoch nicht beeinträchtigt. Die Rover-Gruppe liefert keine Ersatzteile mehr, daher übernimmt ANGLO-PARTS diese Dienstleistung, indem weltweit Rover-Ersatzteile von ANGLO-PARTS eingeführt, neu hergestellt und ausgeliefert werden. Wir benutzen dazu Original “blue prints” und Original-Musterbauteile, um einen erschwinglichen Preis zu garantieren. Die Musterteile werden außerdem noch von anderen Originalherstellern wie z. B. Lucas, Lockheed, Armstrong, Vandervell, Glacier, Borg & Beck etc. hergestellt. Wenn Originalteile dieser Hersteller verfügbar sind, wird ANGLO-PARTS Ihnen diese Teile liefern, auch wenn sie etwas teurer sind. Wir sind der Meinung, dass Qualität und Authentizität an erster Stelle stehen sollten.
2. ALLGEMEINE GESCHÄFTSBEDINGUNGENWir verkaufen und liefern ausschließlich auf der Basis unserer Allgemeinen Verkaufs- und Lieferbedingungen, die auf der Rückseite der Bestellformulare und Rechnungen abgedruckt sind. Sie finden diese Allgemeinen Geschäftsbedingungen auch in diesem Katalog. Wenn Sie bei uns bestellen, sind Sie mit unseren Verkaufsbedingungen einverstanden und akzeptieren diese. Die Firma ANGLO-PARTS behält sich vor, die Allgemeinen Geschäftsbedingungen von Zeit zu Zeit neuen Gegebenheiten anzupassen, und die jeweils letzte Fassung findet Anwendung auf die Verträge.
3. TECHNIKFür technische Erläuterungen empfehlen wir Ihnen die Handbücher im Inhaltsverzeichnis des Kataloges. Wir übernehmen keine Gewähr für technische Informationen in unseren Katalogen, diese dienen lediglich der Darstellung unserer Waren.
4. KATALOGWir haben uns bemüht, unsere Kataloge so sorgfältig wie möglich zu erstellen. Wir übernehmen keine Verantwortung für Fehler oder Ungenauigkeiten im Zusammenhang mit der Spezifizierung, der Preisbestimmung oder den Ersatzteilnummern. Wir behalten uns das Recht vor, aufgetretene Fehler ohne Rechtsnachteile für uns zu verbessern. Gewährleistungsansprüche entstehen nicht, wenn der Fehler zurückzuführen ist auf Verletzung von Bedienungs-, Wartungs- und Einbauvorschriften, ungeeignete oder unsachgemäße Verwendung, fehlerhafte oder nachlässige Behandlung und natürlichen Verschleiß des Liefergegenstandes sowie Schäden aus sportlichen Einsätzen. Zugesicherte Eigenschaften müssen ausdrücklich schriftlich im Einzelnen als solche bezeichnet werden.
5. ERSATZTEILNUMMERN UND PREISEAlle Ersatzteile oder Gruppen von Ersatzteilen haben von uns eine Ersatzteilnummer erhalten. Die Abkürzung QTY steht für die für einen bestimmten Einsatz erforderliche Menge des jeweiligen Ersatzteiles. Die von Ihnen bestellte Liefermenge kann davon abweichen und sollte deutlich neben der jeweiligen Ersatzteilnummer angegeben werden. Bitte verwenden Sie die jeweils neueste Preisliste, um die Lieferbarkeit zu gewährleisten. Ersatzteile, die nicht lieferbar sind, können wir manchmal aus zweiter Hand besorgen. Diese Gebraucht-Ersatzteile stehen nicht immer in unserer Preislisten. Die Preise in unserer Preisliste sind Stückpreise, sie können sich infolge einer Veränderung der Einkaufspreise ebenfalls ändern. Die Listenpreise beinhalten, falls nicht anders bezeichnet, die jeweilige gesetzliche Mehrwertsteuer. Die Ersatzteil-Nummern bestehen aus sechs Ziffern. Die ersten drei Ziffern geben die Art des Ersatzteils an: 161 z. B. steht für Muttern, 162 für Schrauben und 163 für Scheiben. Der Zustand des Ersatzteiles wird in der Preisliste erwähnt oder kann anhand der Nummer erkannt werden. Die folgenden Codes stehen in der Preisliste neben der Ersatzteilnummer, falls dieses Teil nicht neu geliefert werden kann: SH bedeutet aus zweiter Hand, EX wird auf Tauschbasis geliefert, und ein Mehrpreis (Surcharge/Surch) wird berechnet, NA bedeutet im Augenblick nicht erhältlich. LH bedeutet links, RH rechts - jeweils vom Fahrer aus gesehen. LHD bedeutet Fahrer auf der linken Seite und RHD Fahrer auf der rechten Seite. A/R bedeutet “wie erforderlich”, das heißt, dass die erforderliche Menge nach dem Zweck unterschiedlich sein kann. Durch die Abkürzung USE wird eine neue Ersatzteilnummer bezeichnet, welche die ursprüngliche Nummer ersetzt.
6. AUFTRAGSERTEILUNGSie können per Fax, Brief, telefonisch oder wie gewohnt im Shop bestellen. Bei Verwendung unseres Bestellformulars möchten wir Sie bitten, dieses vollständig auszufüllen: Ihre Kunden-Nummer, Adresse, Telefon- und Faxnummer, Umsatzsteuer-ID-Nummer (gewerblich). - Spezifizieren Sie die Lieferadresse, falls diese von der Rechnungsanschrift abweicht. - Geben Sie uns die vollständigen Angaben zu Ihrem Fahrzeug wie Marke, Typ, Baujahr usw. - Benutzen Sie ausschließlich unsere Ersatzteilnummern, dadurch kann Ihre Bestellung schneller bearbeitet werden. - Geben Sie die gewünschte Menge der Ersatzteile unter Verwendung der Beschreibung im Katalog an. - Geben Sie die Art der Zahlungsweise an. - Sobald wir Ihren Auftrag erhalten haben, wird dieser elektronisch weiterverarbeitet, automatisch werden dann daraus die Bestellungen, Lieferscheine und Rechnungen erstellt. Wenn Sie einen einmal gegebenen Auftrag ändern möchten, kann dies zu Fehlern oder Verspätungen führen. Deshalb möchten wir Sie bitten, den Auftrag vor Erteilung genauestens zu überprüfen. Dies hilft uns, die Ersatzteile pünktlich zu liefern. Vielen Dank für Ihr Verständnis.
7. ZAHLUNGSWEISESobald die Bestellung konfektioniert, verpackt, gewogen und gemessen wurde, wird die Rechnung erstellt, und wir werden Ihnen den vollständigen Rechnungsbetrag, die Rechnungsnummer und unsere Bankverbindung mitteilen. Bitte geben Sie bei jeder Zahlung die Rechnungsnummer und Ihre Kundennummer an. Kreditkarten: Zum Zeitpunkt der Drucklegung dieser Allgemeinen Informationen akzeptieren wir folgende Kreditkarten: Visa, Eurocard, Accesscard, Mastercard. Bitte geben Sie bei Kreditkartenzahlung die Kartennummer, das Verfalldatum (und die Prüfnummer, wenn angegeben) sowie den Namen des Karteninhabers an. Eine Zahlung per Nachnahme ist nur im Inland möglich.
8. VERSENDUNGDa der Versand unserer Waren auf Gefahr und Kosten des Bestellers erfolgt, bitten wir Sie, in der Bestellung zu spezifizieren, ob Sie die Waren abholen oder einen Dritten mit der Lieferung beauftragen. ANGLO-PARTS wird die bestellten Waren ausreichend verpacken, um das Risiko von Transportbeschädigungen zu reduzieren. ANGLO-PARTS ist nicht verantwortlich für Ware, die beim Transport verlorengegangen oder beschädigt wurde. ANGLO-PARTS übernimmt keine Haftung für den Frachtführer, der im Auftrag des Bestellers tätig wird. Wir empfehlen daher bei Erhalt der Ware: Überprüfen Sie bitte bei Lieferung der Ware, ob die Verpackung, eventuelle Siegel oder Klebestreifen aufgebrochen wurden und ob die Verpackung beschädigt ist. Für den Fall einer Beschädigung oder das Fehlen von Teilen machen Sie bitte eine entsprechende Notiz auf den Frachtbrief hinsichtlich des Zustandes und des Inhaltes Ihrer Sendung, bevor Sie den Erhalt quittieren. Behalten Sie Ihre Kopie der Rechnung und setzen Sie sich sofort mit Ihrem Frachtführer in Verbindung. Bewahren Sie die Verpackung auf, bis die Fragen geklärt wurden. Wir überprüfen zweimal die Vollständigkeit der Bestellung, das erste Mal beim Konfektionieren und das zweite Mal beim Verpacken der Waren. Daneben sind Sie allerdings verpflichtet, die letzte Kontrolle durchzuführen. Wir verweisen auf die Fristen in unseren Allgemeinen Verkaufs- und Lieferbedingungen.
9. RÜCKSENDUNGENWenn Sie ein Ersatzteil erhalten, für dieses aber keine Verwendung haben und Sie diese Falschbestellung zu vertreten haben, sind wir bereit, diesen Artikel zurückzunehmen. Rücksendungen erfolgen auf Kosten und Gefahr des Bestellers. Wir werden Ihnen den Rechnungsbetrag der Waren abzüglich einer Wiedereinlagerungsgebühr von 15 % erstatten. Wir akzeptieren keine Rücksendung ohne eine Durchschrift unserer Rechnung. Nach Ablauf von mehr als 30 Tagen nach dem Rechnungsdatum akzeptieren wir keine Rücksendung. Lager, Kolben, Kolbenringe, Meterware und Verkleidungsteile (Kopfstützen, Verdecke, Verdeckabdeckungen, Sitzbezüge, Türverkleidungen) sind vom Umtausch ausgeschlossen. Dies gilt auch für Ersatzteile, mit denen ein Installationsversuch unternommen wurde. Wir erstatten keinerlei Verpackungs- und Versandkosten sowie Servicegebühren, die wir an Kreditkartenfirmen bezahlt haben. Die Rückzahlung erfolgt über einen Warengutschein in Höhe des Rückzahlungsbetrages.
10. LIEFERUNG VON ERSATZTEILEN AUF AUSTAUSCHBASISFür Ersatzteile, die von uns auf Austauschbasis angeboten werden, berechnen wir einen Mehrkostenpreis. Dieser Mehrkostenpreis ist in unserem Preisverzeichnis neben der betreffenden Ersatzteilnummer angegeben. Bei Bestellung eines Ersatzteiles auf Austauschbasis wird neben dem Preis für das Ersatzteil auch der Mehrkostenpreis in Rechnung gestellt. Dieser Mehrkostenpreis wird ganz oder teilweise zurückerstattet, vorausgesetzt wir erhalten vom Besteller das entsprechende Austauschteil komplett, sauber und ölfrei und innerhalb von zwei Monaten nach unserem Rechnungsdatum. Bitte senden Sie eine Kopie unserer Rechnung mit. Die Versendung des Austauschteiles erfolgt auf Gefahr und Kosten des Bestellers. Wenn Sie uns das Austauschteil aus dem Ausland schicken, sollten Sie uns einen Brief beilegen, der Ihren Namen, Anschrift, Telefonnummer und das Versendungsdatum sowie eine Beschreibung der Güter beinhaltet und den Mehrkostenbetrag. Bitte fertigen Sie von diesem Brief einige Kopien an, fügen eine dem Paket bei, kleben eine auf das Paket und behalten eine weitere für Ihre eigenen Unterlagen. Wir benötigen diese Informationen für die Einfuhrabfertigung. Bei Eingang der Ware überprüfen wir sofort die folgenden Punkte: War das Teil ausreichend verpackt oder sind Transportbeschädigungen aufgetreten? (Wenn ja, werden wir Sie sofort davon in Kenntnis setzen). Entspricht das Altteil dem von uns gelieferten Teil? Ist das Altteil vollständig, und sind die wichtigsten Ersatzteile noch wiederherstellbar? Bitte beachten Sie, dass wir im Falle der Übersendung eines Falschteiles oder eines beschädigten Teiles nur den jeweiligen Stückwert des zurückgesandten Teiles erstatten. Insoweit führen wir eine Schätzung durch.
11. NACHLIEFERUNGENWaren, die zum Zeitpunkt Ihres Auftrages nicht vorrätig sind, werden als Nachlieferung (Backorder) behandelt. Wir werden Sie sofort über die Verfügbarkeit der Teile informieren. Das Ersatzteil ist mit einer Frist von 14 Tagen nach Absendung unserer Benachrichtigung für Sie reserviert. Sollten Sie diese Frist verstreichen lassen, verfällt die Nachlieferung. Wenn Sie keine Nachlieferung erhalten möchten, können Sie bei Auftragserteilung auch ”keine Nachlieferungen” vermerken. Nachlieferungen können zu jeder Zeit annulliert werden. Wenn das Ersatzteil nicht mehr lieferbar ist, werden wir Sie sofort davon in Kenntnis setzen. Sie können dann entscheiden, ob Sie das Ersatzteil aus zweiter Hand kaufen wollen. Sobald uns ein entsprechender Auftrag vorliegt, werden wir uns bemühen, dieses Ersatzteil für Sie zu besorgen.
5© V a n G e s t e l B & C 2 0 0 5
Allgemeine Verkaufs- und LieferbedingungenAllgemeine Verkaufs- und Lieferbedingungen der ANGLO-PARTS Autoteile GmbH~ Wetzlar
1. Lieferungen durch uns erfolgen ausschließlich unter Zugrundelegung unserer nachfolgenden Verkaufs- und Lieferbedingungen. Bestellungen nehmen wir ausschließich
zu diesen Bedingungen an. Änderungen und Ergänzungen bedürfen der Schriftform. Andere Allgemeine Geschäftsbedingungen gelten auch dann nicht, wenn ihnen im
Einzelfall nicht ausdrücklich widersprochen wurde.
2. Wird eine Bestellung schriftl., mündlich oder auf andere weise getätigt, bleibt dem Besteller eine Frist von 7 Werktagen, um diese Bestellung zu wiederrrufen, sofern
noch keine Lieferung erfolgt ist. Nach Ablauf der 7-Tage Frist hat Anglo-Parts das Recht 30% des Bestellwertes dem Kunden zu berechnen oder 30% vom Wert eines
Vertrages zu berechnen. Der Kunde hat außerdem innerhalb einer Frist von 7 Werktagen, nach Erhalt der Ware, die möglichkeit die erhaltene Ware an Anglo-Parts
zurückzugeben (gemäß Punkt 9 “WICHTIGE AUSKÜNFTE”).
Der Versand unserer Ware erfolgt auf Gefahr und auf Kosten des Bestellers. Die tatsächliche Höhe der der Transport- und Verpackungskosten können nur berechnet werden,
nach der Zusammenstellung und Verpackung der Warensendung. (da Größen- und Gewichtsabhängig.)
3. Sofern der Versand nicht gegen Nachnahme erfolgt, sind Zahlungen rein netto innerhalb von 10 Tagen nach Rechnungserhalt zu leisten. Im Verzugsfall hat
der Besteller Verzugszinsen in Höhe von 3 % über dem jeweils geltenden Diskontsatz der Deutschen Bundesbank zu bezahlen. Die Geltendmachung eines weiteren
Verzugsschadens bleibt vorbehalten.
4. Der Besteller ist - sofern er Kaufmann ist - verpflichtet, unsere Ware unmittelbar nach Erhalt auf Mängel zu untersuchen und eventuelle Mängel unverzüglich, spätestens
innerhalb von 8 Tagen nach Erhalt der Ware - bei zunächst nicht erkennbaren Mängeln innerhalb von 8 Tagen nach deren Bekanntwerden - per Einschreiben bei uns geltend
zu machen. Bei offensichtlichen Mängeln trifft die vorgenannte Verpflichtung auch Nichtkaufleute. Werden berechtigte Mängel gerügt, sind wir lediglich zur Nachbesserung
bzw. zur Ersatzlieferung verpf!ichtet, allerdings erst, nachdem uns die von uns gelieferte Ware zur Verfügung gestellt worden ist. Wir behalten uns die Überprüfung etwa
gerügter Mängel durch den jeweiligen Hersteller vor und sind nicht zu Nachbesserungen oder Ersatzlieferungen verpflichtet, bevor dessen Prüfungsergebnis vorliegt. Nach
endgültig fehlgeschlagener Nachbesserung bzw. Ersatzlieferung ist der Besteller zur Wandelung oder Minderung berechtigt. Gewährleistungsansprüche entstehen nicht,
wenn der Fehler zurückzuführen ist auf Verletzung von Bedienungs-, Wartungs- und Einbauvorschriften, ungeeignete oder unsachgemäße Verwendung, fehlerhafte oder
nachlässige Behandlung und natürlichen Verschleiß sowie vom Besteller oder Dritten vorgenommenen Eingriffen in den Liefergegenstand sowie Schäden aus sportlichen
Einsätzen.
5. Schadenersatzanspruche des Bestellers - aus welchem Rechtsgrund auch immer - insbesondere der Ersatz für verspätete Auslieferung und mittelbare Schäden sind
ausgeschlossen. Dies gilt nicht, soweit uns Vorsatz oder grobe Fahrlässigkeit zur Last fällt.
6. Wir behalten uns das Eigentum an sämtlichen von uns gelieferten Waren bis zur restlosen Bezahlung sämtlicher Forderungen aus unserer Geschäftsbeziehung mit
dem Besteller vor. Veräußert der Besteller die gelieferte Ware weiter, so tritt er hiermit schon jetzt die ihm aus der Veraußerung entstehenden Forderungen gegen seinen
Abnehmer in voller Höhe an uns ab. Übersteigt der Wert unserer Sicherheiten gegen den Besteller (etwaige Eigentumsvorbehalte zuzüglich etwaiger Forderungsabtretungen)
unsere Forderung gegen den Besteller, so werden wir auf dessen Verlangen die Sicherheiten, die unsere Forderung übersteigen, freigeben.
7. Bei vom Besteller zu vertretender Falschbestellung ist ANGLO-PARTS bereit, unbeschädigte Artikel zurückzunehmen. Die Rücksendung erfolgt unter Beifügung
einer Rechnungskopie auf Kosten und Gefahr des Bestellers. Eine Rücksendung ist nicht mehr möglich 30 Tage nach dem Rechnungsdatum. Bei Ersatzteilen mit denen
ein Einbauversuch unternommen wurde, ist eine Rücksendung ebenfalls ausgeschlossen. ANGLO-PARTS erstattet den Rechnungsbetrag der zurückgesandten Ersatzteile
abzüglich einer Wiedereinlagerungsgebuhr von 15 % des Rechnungsbetrages.
8. Für Ersatzteile die auf Austauschbasis angeboten werden, wird der in der Preisliste neben dem Ersatzteilpreis angegebene Mehrkostenpreis berechnet. Dieser
Mehrkostenpreis wird ganz oder teilweise zurückerstattet, vorausgesetzt der Besteller übersendet auf eigene Kosten und Risiko unter Beifügung einer Rechnungskopie das
entsprechende alte Bauteil komplett, sauber und ölfrei innerhalb von zwei Monaten nach Rechnungsdatum. Bei Rücksendungen aus dem Ausland muß der Besteller eine
Bestätigung beifügen, aus der sein Name, Anschrift das Versendungsdatum sowie eine Beschreibung der Güter hervorgeht. Bei der Rücksendung eines falschen Bauteils
wird nur der jeweilige Stückwert erstattet. Insoweit führt ANGLO-PARTS eine Schätzung durch.
9. Ersatzteile die bei Erteilung des Auftrages nicht lieferbar sind, werden, wenn keine anderslautende Anweisung des Bestellers vorliegt, als Backorder behandelt. Bei
Eintritt der Lieferfähigkeit wird der Besteller in Kenntnis gesetzt. Die entsprechenden Ersatzteile werden für einen Zeitraum von 14 Tagen nach Absendung der Bestätigung
für den Besteller reserviert. Backorders können jederzeit vom Besteller annulliert werden.
10. Als Erfüllungsort fur die Lieferung und Zahlung sowie als Gerichtsstand gilt - sofern der Besteller Kaufmann ist - Wetzlar als vereinbart Darüberhinaus gilt ausschließlich
das Recht der Bundesrepublik Deutschland. Das Übereinkommen der Vereinten Nationen vom 11.04.1980 uber Verträge über den internationalen Warenkauf findet keine
Anwendung.
11 Sollte eine Bestimmung dieser Bedingungen und der von uns mit dem Besteller getroffenen weiteren Vereinbarungen unwirksam sein oder werden, so wird dadurch
die Gültigkeit des Vertrages im übrigen nicht berührt. Die Vertragspartner sind verpflichtet, die unwirksame Bestimmung durch eine solche zu ersetzen, mit der der
wirtschaftliche Erfolg der unwirksamen Bestimmung möglichst erreicht wird. Sollten sich aus diesen Allgemeine Verkaufs- und Lieferbedingungen und den Allgemeinen
Informationen Wiedersprüche ergeben, genießen diese Allgemeine Verkaufs und Lieferbedingungen Vorrang.
12. Hinweis gemäß § 33 BDSG: Name und Anschrift des Auftraggebers sowie alle für die Auftragsabwicklung erfoderlichen persönlichen Daten werden ausschließlich
für eigenen geschäftlichen Zwecke in automatisierten Dateien gespeichert und Dritten nicht zugänglich gemacht.
© V a n G e s t e l B & C 2 0 0 56
INFORMAZIONI IMPORTANTILe condizioni di vendita sono stampate sul retro delle fatture, all’interno dei cataloghi e nei listini prezzi. Se si ordina da noi, il cliente accetta e condivide le nostre condizioni di vendita. Prima di effettuare un ordine siete pregati di leggere attentamente i punti seguenti.
I NOSTRI VENDITORINon sono dei tecnici perciò non sono responsabili di eventuali errori, si consiglia sempre il consulto di un meccanico esperto, se si hanno delle difficoltà, oppure consultare i libri tecnici presenti nei nostri cataloghi. I nostri venditori sono comunque entusiasti di poterla aiutare in ogni modo possibile.
I CATALOGHICi impegniamo da sempre affinché le informazioni presenti all’interno dei nostri cataloghi siano il più possibile corrette; quindi, non siamo responsabili di eventuali imprecisazioni o mancanze sulla descrizione, sul prezzo o sui numeri di codice dei ricambi. Per questo ci riserviamo il diritto di apportare le correzioni necessarie senza preavviso.Le illustrazioni degli articoli sono solo indicative, perciò, possono esserci delle piccole differenze per quanto riguarda la forma, ma la qualità e l’utilizzo restano le medesime.La quantità (QT) scritta affianco al codice articolo si riferisce alla quantità necessaria al restauro di una singola auto; tutti i prezzi si riferiscono alla quantità singola, perciò sono da moltiplicare sempre per la quantità scritta accanto all’articolo; è comunque possibile ordinare la quantità desiderata.I ricambi che non sono disponibili, non sono presenti nei listini prezzi oppure sono marcati NA. Talvolta è comunque possibile trovarli di seconda mano. I prezzi dei nostri ricambi possono cambiare improvvisamente e senza preavviso, dipende dei prezzi di acquisto presso i nostri fornitori. I nostri listini sono I.V.A. compresa. Normalmente tutti i codici si riferiscono all’articolo NUOVO. Talvolta sono presenti delle eccezioni, come: SH: ricambio d’occasione/seconda mano. EX: si tratta di materiale revisionato, per il quale serve il reso del vecchio, altrimenti si deve pagare un sovrapprezzo. NA: Non disponibile. LH: sinistro. RH: destro ( visti dal punto di vista del guidatore). LHD: guida a sinistra. RHD: guida a destra.- A/R: a richiesta (la quantità può variare a seconda dell’applicazione). USE: il numero di articolo è stato sostituito dal numero indicato.
ORDINIAccettiamo ordini via fax, telefono, e-mail, a mezzo posta, internet oppure in negozio; nel caso utilizzate il nostro modulo d’ordine, tenete presente quanto segue: - indicare sempre il vostro codice Cliente (solo se siete già clienti), il nome, l’indirizzo, il numero di telefono, il codice fiscale o il numero di partita I.V.A. per le Ditte; - specificare l’indirizzo per la consegna nel caso fosse diverso da quello di fatturazione; - completare i dati identificativi della vostra vettura: marca, tipo, anno di costruzione, ecc. - usare soprattutto i nostri codici articolo; ciò rende più facile e sicura l’evasione del vostro ordine. - indicare sempre la quantità a voi necessaria e scrivete la descrizione dei ricambi. - indicare la modalità di pagamento; se prevedete l’uso di carta VISA, MASTERCARD, inserite il codice completo (16 cifre), la scadenza e il badge code. Tutti questi dati sensibili vengono inseriti nel nostro sistema computerizzato per la corretta evasione dell’ordine; modificare un ordine già inviato provoca grave disordine nei nostri sistemi causando la possibilità di sbagliare e ritardare l’evasione dell’ordine stesso. Perciò vi chiediamo di controllare bene tutti i dati prima di trasmetterli: ci aiuterà a fornirvi i ricambi nei modi e nei tempi corretti. Certi della vostra collaborazione vi ringraziamo.
PAGAMENTICarta di credito: al momento, accettiamo esclusivamente carta di credito del circuito VISA, MASTERCARD. Siete pregati di indicare correttamente il numero di 16 cifre, la scadenza, il badge code ed il nome del “titolare” della carta.Bonifico Bancario: Vi invieremo, via fax o via mail, la copia della fattura, quindi provvederete a fare il bonifico immediatamente inviandoci copia dello stesso, sarà nostra premura spedire il materiale non appena arrivato il pagamento.Contrassegno: Pagamento in CONTANTI o assegno circolare al corriere. Solo su nostra autorizzazione potete lasciare un assegno bancario.
SPEDIZIONEEffettuiamo solo spedizioni Nazionali, utilizzando il corriere espresso. La consegna viene effettuata in 24h/48h. I costi del trasporto e dell’imballaggio vengono conteggiati in fattura, essi variano in base al volume del pacco. Il contrassegno prevede un costo aggiuntivo per i diritti d’incasso del corriere. Cerchiamo di imballare il materiale nel modo migliore al fine di evitare rotture o danni: tuttavia, nel caso dovesse succedere, Anglo Parts SRL non si ritiene responsabile di spedizioni danneggiate o perse durante il trasporto. Il cliente dovrà dare comunicazione scritta entro tre giorni dal ricevimento della merce. Nel caso di problemi, tutto il materiale di imballaggio deve essere conservato per l’eventuale verifica. Il materiale fragile (parabrezza,parti in vetro,etc) viene da noi assicurato.
RICEVIMENTO DELLA MERCESiete pregati di verificare, al ricevimento della merce, che i sigilli, il nastro adesivo e la confezione non siano rotti o manomessi. In caso di danneggiamento o perdita del materiale: firmate con riserva al corriere, conservate la copia del documento di trasporto/fattura, presentate immediatamente un reclamo al trasportatore e metteteci a conoscenza dell’accaduto. Conservate in ogni caso l’imballo finché i problemi non saranno stati risolti. Verificate immediatamente se avete ricevuto tutto il materiale ordinato e se tutti i pezzi meccanici funzionano. Non aspettate di verificare i pezzi al momento del montaggio e, in caso di difetti o errori, scriveteci entro tre giorni dal ricevimento della merce.
GARANZIAAnglo Parts si impegna a comprare solo dai fornitori migliori, controllando nel limite del possibile tutti i ricambi, ma talvolta vi consigliamo di fare un ultimo controllo prima del montaggio. Soprattutto bisogna verificare che i pezzi meccanici siano in perfetto stato. Il periodo di garanzia inizia dalla data di fatturazione e non dalla data del montaggio. I nostri ricambi hanno una garanzia limitata al valore del pezzo, quindi eventuali reclami comportano solo la sostituzione del pezzo difettoso o la restituzione del solo valore dell’articolo. La Garanzia non copre i costi del montaggio, del trasporto, di danni conseguenti al difetto del pezzo, di un montaggio scorretto e di pezzi che vengono usati per competizioni o rally. Nel caso di reclami coperti da garanzia, i pezzi devono essere restituiti al negozio; a tal proposito tenete presente che: il valore deve essere maggiore di 7,5 Euro, tutti i pezzi devono essere rispediti puliti e ben imballati. Una volta ricevuti i pezzi Anglo Parts SRL verifica se si tratta di un difetto di fabbrica oppure se è dovuto ad un montaggio scorretto. I pezzi danneggiati dal trasporto o nell’imballo non vengono presi in considerazione.
RISPEDIZIONEAccettiamo resi di materiale, solo se autorizzati, entro e non oltre 10 giorni dal ricevimento della merce. Se la restituzione è dovuta ad un errore di ordinazione da parte vostra, viene detratto dal costo dell’articolo il 15%, quale copertura di costi generali (valore minimo articolo 7,5Euro).Non vengono accettati resi di materiale che siano stati anche parzialmente montati! I costi del trasporto e dell’imballaggio non vengono MAI restituiti.
SUPPLEMENTOAlcuni ricambi vengono forniti rigenerati (rebuilt), in essi grava un sovrapprezzo (surcharge); questo sovrapprezzo verrà restituito solo dopo aver ricevuto il vecchio ricambio. Al ricevimento da parte nostra dei pezzi verificheremo immediatamente se è possibile riaccreditare il sovrapprezzo da voi pagato. La spedizione del vecchio ricambio è a carico vostro.
BACKORDERS / ORDINI ARRETRATII prodotti che non abbiamo disponibili al momento dell’ordine, vengono messi in “backorder”; Ciò significa che non appena il ricambio sarà disponibile presso la nostra sede, provvederemo a comunicarvelo a mezzo posta. Tale ricambio viene tenuto in prenotazione per voi per una durata di 15 giorni a partire dal giorno di spedizione della lettera postale da parte nostra. NEL CASO NON RICEVESSIMO vostre notizie entro questo tempo, il pezzo potrà essere venduto a qualsiasi altro cliente. Se ordinate tramite modulo d’ordine o tramite internet potrete specificare se vorrete o meno ricevere gli articoli non evasi. Nel caso un pezzo in “backorder” non fosse più disponibile, vi verrà comunicato.
Informazioni importante
7© V a n G e s t e l B & C 2 0 0 5
How to read and use the part number lists
ILL n°. Part n°. QTY DESCRIPTIONillustration number Part number Quantity required Part description
Illustration numberExceptions: If a part has no illustration number it is because there are several kinds of the part in question.e.g. Left and right hand door panel.
Part numberExceptions: A part number may be missing if the part is no longer obtainable or in production.
Necessary quantity:ATTENTION: indicated here is the quantity of units necessary and not the quantity of units which are supplied per order/delivery. Our parts are sold per unit.
Part descriptionWith dimensions of screws, bolts, cables, etc. Information about carburetters, electricity etc., details about books giving more information about the part itself: original, reproduction, reconditioned, etc.
Illustratie nummerUitzonderingen: Een onderdeel heeft geen Illustratie nr. omdat er meerdere soorten van het bestaande stuk zijn. vb. Links en rechts deurpaneel
OnderdeelnummerUitzonderingen: Een onderdeel-n u m m e r k a n o n b r e k e n waarneer dit stuk niet meer te verkrijgen of in produktie is.
Nodige HoeveelheidLET OP: Hier wordt de hoeveelheid stuks die nodig zijn vermeld en niet de hoeveelheid stuks die worden geleverd bij bestellingen. Onze onderdelen worden verkocht per stuk.
Onderdeel beschrijvingMet maten van schroeven, bouten, kabels enz. Informatie over carburateurs, elektriciteit enz. Details over boeken die meer informatie geven. Informatie over het onderdeel zelf: origineel, reproduktie, gerestaureerd enz.
Numéro illustrationExceptions: Si une pièce détachée ne comporte pas de numéro d’illustration, c’est que la pièce existe en plusieurs versions.Exemple: Panneau de porte gauche - droite.
Numéro de la pièceExceptions: Si ce numéro n’est pas indiqué, c’est parce que cette pièce n’estplus disponible ou qu’e l le n’est p lus en production.
Quantité nécessaire:ATTENTION: Sous cette rubrique, on mentionne la quantité de pièces qu’il faut et non la quantité de pièces livrées lors de la commande. Nos pièces détachées se vendent à l’unité.
Description de la pièce:Comporte les dimensions des vis, écrous, câbles etc. Des reseignements au sujet de carburateurs, électricité etc., des détails concernant des livres informatifs. Des renseignements au sujet de la pièce même: pièce d’origine, reproduction, pièce révisée etc.
Abbildungsnummer:Ausnahmefall: Wenn ein Einzelteil keine Abbildungs-nummer hat, ist das, weil der Einzelteil in mehreren Fassungen besteht.Beispiel: Linke - rechte Türfläche.
Nummer des Ersatzteils:Ausnahmefall: Mangelt diese Nummer, dann ist dieser Einzelteil nicht mehr verfügbar oder wird er nicht mehr hergestellt.
Benötigte Menge:Achtung! Unter diesem Titel wird die Menge der benötigten Einzelteile angegeben, sondern nicht die Menge der bei Bestellungen gelieferten Einzelteile. Unsere Einzelteile werden stückweise verkauft.
Beschreibung des ErsatzteilsBetrifft die Abmessungen der Schrauben, Mutter, Kabel, usw.; Auskünfte über Vergaser, Elektrizität, usw. Einzelheiten über Info-Bücher, Auskünfte über den Einzelteil selbst: Originaleinzelteil, Reproduction, überholter Einzelteil usw.
Numero illustrazioneEccezioni: Un componente non ha un numero il lustrazione perchè ci sono vari tipi del pezzo esistente.P. es. Pannello porta destro e sinistro.
Numero componenteEccezioni: Può succedere che non c’è un numero componente quando il pezzo non è più disponibile o quando non è più
in produzione.Quantità necessariaAVVERTENZA: La quantità di pezzi necessari è data, e non la quantità di pezzi consegnati dopo ordinazioni. I nostri componenti vengono venduti
al pezzo.Descrizioni componentiCon misure di vite, bulloni, cavi ecc. Informazione su carburatori, elettricità ecc. dettagli su libri che danno ulteriore informazione. Informazione sul componente stesso: originale, riproduzione, revisionato ecc.
GB
D
F
NL
I
© V a n G e s t e l B & C 2 0 0 58
Wire wheel balancing
How to balance centrelock wire wheels
The diagrams show the centre spline of a wire wheel attatched to a balancer.Diagram A is the correct method of locating the wheel.Diagram B shows the wrong method.
(1) Balancer lock nut(2) Splined hub(3) Sprung cone(4) Mounting face of balancer(5) Locate only at these external points(6) Locate only at these points(7) Do not locate at these internal points(8) Do not locate at these points(9) Inner cone with distance piece
POINTS TO CHECKThe original high degree of balance may be affected by wheel damage as well as by factors related to the tyres uneven tread wear, cover or tube repairs etc. If roughness or high speed steering trouble develop, and this cause is not disclosed by mechanical investigation, then the complete tyre and wheel assembly should be checked for balance.
It is IMPERITIVE that the hubs are located on the balancing machine in exactly the same manner as located on the car and the factory truing jigs. Alternatively, balance on the vehicle, this operation can only be done on the front wheels of your car.
Das Auswuchten von Speichen- rädern mit zentral Verschluss.
Die abbildungen zeigen die Nabe eines ZV-Speichen-rades auf einer Auswuchtmaschine montiert.Abbildung A: Die richtige Montage. (Nabenteller berührungsfrei, außen sitzender Außenkonus ) .Abbildung B: Hier ist die Nabe falsch montiert!
(1) Außen übergreifender Wuchtkonus(2) Speicherad-Nabe(3) Innenkonus mit Distanzstück “i”(4) Anlageplatte der Wuchtmaschine(5) Hier über Original-Außenkonus spannen(6) Hier über Original-Innenkonus spannen(7) Nicht über Innenkonus führen(8) Der Nabenteller darf die Anlageplatte nicht berühen!(9) Distanzstück, zur Verhinderung von Punkt “H”
Überprüfungspunkte: (Hinweise)der ursprünglich gute Rundlauf eines Rades kann sowohl durch eine Beschädigung des Rades als auch durch unleichmäßige Reifenabnutzung, Schlauchreparaturen oder ungenau gefertigte Neureifen etc. beeinträchtigt werden. Wenn vibrationen auftreten, deren Ursache nicht zweifelsfrei in der Mechanik liegen, solte das komplette Rad mit reifen ausgewuchtet werden.
Es ist absolut unumgänglich, dab die Râder auf der Wuchtmaschine genauso gespannt werden wie am Wagen selbst. Bei Bedarf sind die erforderlichen Spannwerkzeuge über MWS zu bezichen. Alternativ ist es möglich, die Räder elektronisch am Wagen zu wuchten, was jedoch nur an nicht angetriebenen Achsen möglich ist.
COMMENT EQUILIBRERDES ROUES A RAYONS
Le dessin montre le moyeu d’une roue fixée sur une équilibreuse.LE SCHEMA A indique la méthode de fixation correcte.LE SCHEMA B indique une fixation incorrecte.
(1) Equilibreuse, écrou de vérouillage(2) Moyeux(3) Cone ressort(4) Montage Avant de l’équilibreuse(5) Placer seulement sur ces points exterieurs(6) Placer seulement sur ces points(7) Ne pas placer sur ces points interieurs(8) Ne pas placer sur ces points(9) ecartement afin d’éviter le contact sur point
LES POINTS A OBSERVER ET VERIFIER:La précision de l’équilibrage peut être affectée par une jante détériorée aussi bien que par des pneus usés ou des tubeless reparés, etc. Si la direction devient dure ou représente des troubles à grande vitesse, et, où après verification, la cause n’est pas mécanique, il convient de verifier l’équilibrage de la roue.
IL EST IMPERATIF de respecter le schema A lors de l’installation sur l’équilibreuse. On peut aussi équilibrer les roues avants seulement sur le vehicule, à l’aide d’un appareil adapte. Pour tous renseignements complementaires n’hésitez pas à contacter
GB D
COME BILANCIARERUOTE A RAGGI
Il disegno mostra il mozzo d’una ruota fissata su una macchina da bilanciare.LO SCHEMA A indica il metodo corretto di fissare una ruota.LO SCHEMA B mostra il metodo scorretto !
(1) Un dado di fermo(2) Mozzo(3) Pezzo conico sporgente(4) Disco di montaggio della macchina da bilanciare(5) Mettere soltanto sui punti esteriori(6) Mettere soltanto su questi punti(7) Non mettere su questi punti interiori(8) Non mettere su questi punti(9) Separazione per evitare il contatto con il punto
La precisione del bilanciare diventa meno sicura a causa di un cerchione danneggiato, di pneumatici usati o di gomme riparate, etc. Se la conduzione diventa difficile o presenta dei problemi a grande velocità e, doppo la verifica mecanica, la causa non è questa, è necessario verificare il bilanciare della ruota. È necessario rispettare lo schema A durante l’instalazione sulla macchina da bilanciare. Si può bilanciare soltanto le ruote anteriori sulla macchina, per mettere di un apparecchio adatto.
F NL IHet uitbalanceren van een “centre lock” spaakvelg
Illustraties:SCHEMA A Dit is de juiste wijze van balanceren.SCHEMA B Op deze foute wijze krijgt men afwijkende meet gegevens.
(1) Balanceer moer(2) Spaakvelg(3) Binnencone met afstandstuk(4) Montage plaat van balanceer apparaat(5) Centreren op deze binnenste punten(6) Op deze punten centreren(7) Niet centreren op deze binnenste punten(8) Niet op deze punten centreren(9) Binnencone met afstandstuk
Belangerijk is de wijze waarop de spaakvelg op het balanceer apparaat opgespannen wordt. Zie illustratie A en B.
In verband met de garantie wordt aanbevolen de spaakvelg zonder band op het balanceer apparaat op te spannen en na te zien of de velg in balans is. De afwijking wordt gemeten vanaf de rand waar de band tegen komt te liggen met maximaal 2 millimeter afwijking. Als deze afwijking minder is, dan kan de band op de spaakvelg gemonteerd worden en het geheel uitgebalanceerd worden.
9© V a n G e s t e l B & C 2 0 0 5
IndexAAccelerator cable 16Air filter 10, 22Air intake grill 20, 66Alloy wheel 91Alternator 54Aluminium rocker cover 14Angle drive 58Anti-freeze 19Ash tray 78ATF oil 32, 91Automatic transmission 21
BBadge clamp 71Battery cable 60Battery 54Blanking plugs 85Body panels 64-65Bonnet cable 66Bonnet moulding 66Bonnet 66Books 93Boot lid 66Boot rack 82Brake calliper 46Brake disc 46Brake drum 44Brake fluid 36, 39Brake hoses 42Brake improvements 88Brake pedals 37Brake pumps 38-39Brake switch 42Bumper mounting kits 72Bumpers 72
CCamshaft 12Carburettor oil 22Carburettors 22Carpet sets 80CD-rom 93Chassis plate 92Choke cable 16Cigar lighter 58Close ratio gearkit 87Clutch hydraulics 36Clutch 15Cockpit rail cover 78Coil, ignition 10Condensor 10, 54Contact set 10, 54Conzoll radio speaker 78Copper grease 52Crankshaft 11Cylinder head 12
DDashtop recovering kit 78Direction indicator 56-58Distributor 54
D continued
Door fittings 68-71Door glass 70Door handle 68Door hinge 68Door seal finishers 68Door seal 79Door steps 79
EEmission control 18Engine mountings 16Engine paint 10Engine parts 11Exhaust manifold 17Exhaust system 17Expansion tank 19
FFacet fuel pump 23Fan belt 19Fan 19Filler cap 23Flasher box 56Flasher unit 60Floor 65Fog lamp 63, 91Formula Power lead set 87Frame, hood 81Front brakes 46Front suspension 33-35Fuel pump 23Fuel tank 23
GGasket set, engine 10Gear lever gaiter 78Gear lever knob 26, 78Gearbox mountings 16Gearbox oil 24Gearbox 24-27Girling servo 40Glue 78, 80Green brake pads 88Grill 72Grommet kit 85Grose jet 22GT specials 84
HHandbrake 44Hard top 83Headlamp cowls 91Headlamps 62Headlining kit, GT 79Heater installation 20Heater motor 20Heater radiator 19, 20Hood cover 82Hood 81Horn 60
IIdentification plates 92Inlet manifold 17
JJack 52
KK&N air filter 22Kenlowe fan kit 88King pin set 35
LLead kit 10Letterset 66Lights and lamps 60Lock fitting kit, door 69Lock set 66, 68Lockheed servo 41Lumenition ignition 55
MMap pocket 79, 80Mirrors, exterior 69, 76Mirrors, interior 74Moto-lita steering 47, 90Mouldings 64
OOil cooler 15Oil filter conversion 87Oil filter 10, 14Oil 10Overdrive switch 27Overdrive 30Overriders 72
PPedal rubber 36Polyurethane bushes 89Propellor shaft 29Punch & bed kit 82
RRAC badge 71Radiator 19Rear axle 50Rear brakes 44Rear suspension 49Reverse lamp 60Reverse light switch 26Rotor arm 10Rubber grease 36, 39, 44
SSafety belt 82Seats 77Sebring spoilers 91Servo 40-41Shock absorber, front 33Shock absorber, rear 49Silicone brake fluid 36, 39
S continued
Silicone spray 52Sill 65Slave cylinder 36Spark plug 10Speedometer cable 56-58Spot lamp 63Starter motor 54Starter motor, modern type 87Steering column 47Steering lock 47Steering rack 48Steering wheel 47Steering wheel, Moto-Lita 90Stickers 92Stop light switch 42Sun visors 74Superflex bushes 89Switches, dashboard 56-58Synchro ring, gearbox 25
TTailgate GT 66Temperature transmitter 12, 58Thermostat 12Tonneau cover 82Tool and jack bag 80Tool bag 52Trim panels 79
UUnion jack 92Universal joint 29Universal joint, steering 47
VVacuum unit, distributor 54Valve, heater 19Voltage stabilizer 56-58
WWalnut veneer dashboard 90Water pump 19Weber parts 86Wheel cylinder 44Wheel nut 52Wheels 52Window regulator 70Windscreen washer kit 76Windscreen 74Wings, front/rear 64Wiper motor 60Wire wheels 52Wiring loom 60Workshop manual 24
© V a n G e s t e l B & C 2 0 0 510
Engine, most important parts
ILL N° PART N° QTY DESCRIPTION
4 016.185 1 Head gasket set , all gaskets necessary to change a cylinder head incl. (Not included are the exhaust sealing rings, 111.003) 5 016.186 1 Conversion gasket set (included are all gaskets for the bottom engine part) 6 016.191 1 Oil seal, front 7 016.036 1 oil seal, rear 8 300.522 2 1 Gallon Castrol classic engine oil (4.5 L.) 300.501 2 5 L. Penrite classic 20W60 engine oil Capacity when oil cooler is fitted 7.3L. 9 011.137 1 Oil filter element & seals 10 101.165 2 Air filter element
ILL N° PART N° QTY DESCRIPTION
11 012.058 6 Spark plugs 12 081.163 1 Cap, distributor 13 081.161 1 Rotor arm 14 081.017 1 Condensor 15 081.016 1 Contact set 16 081.171 1 Lead kit 181.055 1 Silicone blue H.T. lead set 17 081.001 1 Ignition coiI 18 186.146 A/R 1 L. ENGINE PAINT 187.069 A/R 400ML. ENGINE PAINT, SPRAY
Penrite oilsSee your local Anglo Parts dealer for more information
11© V a n G e s t e l B & C 2 0 0 5
Engine, most important parts
ILL N° PART N° QTY DESCRIPTION BEFORE REBORING: USE THE WORKSHOP MANUAL FOR THE CORRECT BORE DIMENSIONS 1 014.160 1 PISTON SET - STD (Bore 83.36 mm) 014.162 1 Piston set - .020” (0,508 mm) 014.163 1 Piston set - .030” (0,762 mm) 014.164 1 Piston set- .040” (1,016 mm) 014.166 1 Piston set - .060” (1,524 mm) 2 014.170 1 PISTON RING SET - STD 014.172 1 Piston ring set - .020” 014.173 1 Piston ring set - .030” 014.174 1 Piston ring set - .040” 014.176 1 Pistonringset-.060” 3 014.167 6 One PISTON LINER 4 015.082 1 MAIN BEARING SET - STD 015.083 1 Main bearing set - .010” 015.084 1 Main bearing set - .020” 015.085 1 Main bearing set - .030” 5 013.075 1 THRUST WASHER SET - STD 013.076 1 Thrust washer set - .005” 013.077 1 Thrust washer set - .010” 6 015.086 1 CON ROD BEARING SET - STD 015.087 1 Con rod bearing set - .010” 015.088 1 Con rod bearing set - .020” 015.089 1 Con rod bearing set - .030” 7 013.177 6 Con rod assembly 8 162.488 12 Con rod bolt 9 161.308 12 Nut, con rod bolt 10 013.180 6 Small end bush 11 013.176 1 REGROUND CRANKSHAFT, less bearings 013.212 1 New crankshaft, less bearings 12 172.242 2 KEY
ILL N° PART N° QTY DESCRIPTION
13 011.187 1 Pulley 29 G 14 011.188 1 Pulley 29 GA 15 174.030 1 Washer, lock TAB 16 161.309 1 Nut 17 015.090 1 Camshaft bearing set 18 167.086 4 Stud, UNC/UNF 3/16” x 7/8” 19 011.189 1 PLUG,dipstickboss 20 011.190 1 PLUG, chain tensioner oil feed 21 011.191 4 Dowel, front cover & rear plate 22 011.192 2 Oil gallery plug 23 172.487 2 Dowel, water pump 24 011.194 1 Plug, distributor gear oil feed 25 011.147 1 Core plug set 26 167.087 1 Stud, rear plate to crankcase 27 061.122 1 Tab,waterdrain 28 168.101 1 Washer, fibre 29 013.043 14 Bolt, main cap bearing 30 167.088 3 Stud, oil pump 31 011.028 1 Plate, fuel pump hole blanking 32 016.017 1 Gasket 33 162.005 2 Screw 34 164.002 2 Washer, spring 35 167.089 7 Cylinder head stud, long 36 167.090 7 Cylinder head stud, short 37 163.279 14 PLAIN WASHER 38 161.310 14 Cylinder head nut 39 011.195 1 Tube, oil stick 40 011.196 1 Oil lever indicator 41 163.011 1 Washer, plain 42 168.102 1 Washer, rubber
© V a n G e s t e l B & C 2 0 0 512
Cylinder head
13© V a n G e s t e l B & C 2 0 0 5
Cylinder head
ILL N° PART N° QTY DESCRIPTION
1 012.144 1 Cylinder head, Lead free 2 012.186 1 Original valve rocker cover 3 016.189 1 Gasket, rocker cover 4 012.187 1 Oil filler cap assembly 5 163.010 7 Washer, plain 6 162.125 7 Pan pozi screw 1/4” UNF X 5/8” 162.123 7 Pan pozi screw 1/4” UNF x 3/4” (for ALLOY ROCKER COVER) 7 172.243 3 Clip, thermo pipe retainer 8 011.197 2 Bracket, engine sling 9 016.187 1 Head gasket 016.185 1 Head gasket set 10 012.188 1 Complete rocker shaft assembly 11 012.150 1 Rocker shaft 12 011.007 1 Plug screw, front 13 012.010 1 Plug screw, rear 14 012.189 12 Reconditioned rocker arm 012.190 12 New, rocker arm 15 012.151 12 Rocker arm bush 16 172.244 12 RIVET, PLUG, DRILLED HOLE 17 012.025 12 Adjusting screw 18 161.008 12 Adjusting nut 19 012.191 6 Dracket, rocker shaft (plain) 20 012.192 1 Bracket, rocker shaft (tapped) 21 162.073 7 Bolt 22 164.002 7 Washer, spring 23 012.193 1 Screw, shaft locating 24 012.194 6 Distance piece 25 012.195 6 Spring 26 013.175 6 Inlet guide (lead free or competition) 012.038 6 Inlet guide, STD 013.175 6 Exhaust guide ( lead free or competition) 012.038 6 Exhaust guide, STD 27 012.159 6 Inlet valve 012.160 6 Exhaust valve 28 012.152 1 Valve spring set 29 012.042 24 One valve cotter 30 012.196 12 Cup, valve spring, top 31 012.032 12 Cup, valve spring, bottom 32 013.173 12 Valve stem seal 33 013.213 12 Push rod 34 013.181 12 Cam follower, STD 013.214 12 Cam follower, oversize .254 mm 013.215 12 Cam follower, oversize .508 mm 35 012.198 1 New camshaft, STD 012.161 1 Reprofiled camshaft 013.224 1 Camshaft, fast road specifications 36 172.245 1 Key 37 013.216 1 Plate, locating 38 164.002 3 Spring washer 39 162.005 3 Screw 40 013.184 1 Timing chain
ILL N° PART N° QTY DESCRIPTION
41 013.188 1 Camshaft gear 42 013.187 1 Crankshaft gear 43 013.021 1 T ensioner assembly 44 174.003 1 Lockplate 45 162.208 2 Bolt 46 016.022 1 Gasket 47 013.217 1 DAMPER, chain 48 174.031 1 Lockplate 49 162.005 2 Screw 50 013.218 1 Lock washer 51 161.311 1 Nut 52 013.219 A/R Washer, shim 53 013.220 1 Oil thrower 54 016.191 1 Oil seal, front cover 55 016.231 1 Gasket, front cover 56 011.198 1 Cover, timing chain 57 162.081 5 Bolt, long 58 164.002 7 Spring washer 59 162.481 2 Bolt, short 60 011.199 1 Housing, distributor 61 162.020 2 Screw 62 164.002 2 Spring washer 63 016.232 1 Gasket 64 013.221 1 Thrust washer 65 013.222 1 Shaft, distributor gear 66 172.006 1 Key 67 013.223 1 Gear, distributor drive 68 167.074 15 Stud, manifold 69 167.091 2 Stud, water outlet 70 012.199 1 Plug, thermal transmitter boss 71 012.200 2 Injector, air (short) US 012.201 4 Injector, air (long) US 72 012.202 2 Washer, crushing 73 011.200 1 Blanking plate, heater outlet 74 016.028 1 Gasket 75 011.201 1 Elbow, heater outlet 76 162.029 2 Screw 77 164.012 2 Spring washer 78 012.203 1 Core plug 79 012.204 4 Core plug 80 012.206 1 82° Thermostat 81 016.233 1 Gasket 82 161.002 2 Nut 83 164.002 2 Washer, spring 84 012.207 1 Water elbow 85 016.234 1 Gasket, elbow to extension 86 012.208 1 Filler neck 87 061.158 1 Filler cap 88 081.026 3 Screw, UNC 89 164.012 3 Washer, spring 90 012.140 1 Temp. transmitter (USA only)
© V a n G e s t e l B & C 2 0 0 514
Oil pump & filter
ILL N° PART N° QTY DESCRIPTION
1 185.744 1 Aluminium rocker cover with cap & fixing kit 6 011.202 1 Cover and bracket 7 016.235 1 Gasket 8 162.020 5 Screw, 5/16” UNF 9 168.028 5 Washer, copper 10 016.035 2 Gasket 11 011.026 1 Central cover, plain 12 011.203 1 Cover and separator 13 162.490 2 Screw with seal retainer 14 168.103 2 Seal, ‘0’ ring 15 011.204 1 Cover, water manifold 16 016.236 1 Gasket, side cover 17 162.030 13 Bolts 18 164.002 13 Washer, spring 19 011.205 1 SPIN-ON, oil filter conversion kit 20 011.206 1 Oil filter, replacement 21 011.137 1 Oil filter 22 162.491 1 Centre bolt
ILL N° PART N° QTY DESCRIPTION
23 168.104 1 Sealing washer 24 011.207 1 Container 25 171.002 1 Spring, pressure plate 26 163.021 1 Washer 27 168.018 1 Washer, felt 28 011.070 1 Plate pressure 29 172.037 1 Circlip 30 016.042 1 Sealing ring 31 011.208 1 Centre tube 32 011.209 1 Insert anchor 33 011.210 1 Plate, pressure 34 011.211 1 Filter adaptor 35 168.020 1 Washer, copper 36 011.212 1 PLUG 37 013.183 1 Valve oil pressure release 38 016.237 1 Gasket 39 163.014 2 plain washer 40 164.006 2 Spring washer 41 162.218 2 Bolt 42 013.182 1 Oil pump repair kit
ILL N° PART N° QTY DESCRIPTION
43 013.225 1 Oil pump assembly 44 016.238 1 Gasket 45 011.214 1 Strainer, oil 46 164.012 3 Washer, spring 47 162.208 3 Bolt 48 167.088 3 Stud, oil pump to block (29G) 49 164.002 3 Washer, spring 50 161.002 3 Nut 51 162.474 3 Bolt 52 164.002 3 Washer, spring 53 016.188 1 Oil Pan gasket 54 011.215 1 Oil pan 55 164.002 4 Spring, washer 56 161.002 4 Nut 57 163.011 25 Washer, plain 58 162.029 21 Screw 59 011.216 1 Drain plug 017.140 1 Magnetic drawn plug 60 168.105 1 Washer, drain plug
1
15© V a n G e s t e l B & C 2 0 0 5
Oil cooler, clutch & flywheel
ILL N° PART N° QTY DESCRIPTION
1 060.003 1 Oil cooler, engine - 13 ROW 2 060.016 1 Oil cooler, engine - 10 ROW 3 060.021 1 Oil cooler, gearbox - AUTOMATIC 7 071.009 1 Flexible, inner (long) 8 071.010 1 Flexible, outer (short) 9 011.066 2 Grommet, hose 10 133.552 1 Bracket, hose, cooler 11 011.065 2 Strap kit, hoses 12 133.553 2 Pedestal, oil cooler 13 162.485 4 Bolt 15 163.010 4 Washer, plain 16 164.012 4 Washer, spring 17 011.067 1 Union, adaptor 18 168.016 1 Washer, adaptor union 19 071.012 1 Pipe, automatic, short 20 071.013 1 Pipe, automatic, long 21 172.079 1 Clip, pipe 22 162.051 1 Screw 23 163.007 1 Washer 24 164.015 1 Washer, spring 25 071.011 2 Flexible, gearbox cooler to rigid pipe 26 011.181 2 Connector, automatic gearbox to pipe 27 011.182 1 Support block, pipes
ILL N° PART N° QTY DESCRIPTION
28 011.183 1 Cap, support block 29 162.088 1 Bolt 30 163.001 1 Washer, plain 31 164.002 1 Washer, spring 32 172.151 2 Clip, flexible pipe to gearbox 33 162.139 1 Screw 34 163.007 2 Washer, plain 35 164.015 1 Washer, spring 36 161.024 1 Nut 37 133.554 4 Distance tube, gearbox cooler 38 162.026 4 Bolt 39 163.010 4 Washer, plain 40 164.012 4 Washer, spring 41 021.029 1 Clutch cover 021.107 1 Fast Road clutch cover 42 021.030 1 Clutch plate 021.108 1 Fast Road clutch plate 43 021.031 1 Release bearing 44 172.046 2 Clip, bearing retainer 45 162.005 6 Screw 46 164.002 6 Washer, spring 47 016.036 1 Oil seal, crankshaft 48 023.007 1 Oil seal, gearbox
ILL N° PART N° QTY DESCRIPTION
49 016.229 1 Gasket rear plate USE PRIOR TO CONVERSION SET 016.186 50 011.184 1 Plate assembly, rear engine mounting 51 162.486 2 Screw, long 52 162.072 6 Screw, short 53 164.006 9 Spring, washer 54 161.026 1 Nut 55 011.146 1 Crankshaft bush, manual 011.163 1 Crankstaft bush, automatic 56 011.084 1 Starter ring, manual 57 011.140 1 Flywheel assembly 58 172.002 3 Dowel pin 59 174.007 1 Lock plate 60 162.487 6 BOLT, FLYWHEEL TO CRANKSHAFT 61 011.166 1 Starter ring, AUTOMATIC 62 011. 185 1 Plate, AUTOMATIC 63 174.029 4 Tab plate 64 162.045 8 SCREW 65 161.002 8 Nut 66 011.186 1 DRIVE PLATE assembly, automatic 67 011.165 1 Plate, support 68 011.164 1 Plate, crankshaft back
© V a n G e s t e l B & C 2 0 0 516
Engine mountings & control cables
ILL N° PART N° QTY DESCRIPTION
1 101.178 1 Accelerator cable, LHD 101.179 1 Accelerator cable, RHD 2 101.079 1 Choke cable, LHD 101.180 1 Choke cable, LHD (N. America) 101.181 1 Choke cable, RHD 3 133.543 1 Accelerator pedal, LHD 133.544 1 Accelerator pedal, RHD 4 101.078 1 Pedal stop, LHD 133.545 1 Pedal stop, RHD 5 101.022 1 BUSH 6 101.077 1 Tube distance 7 164.002 1 Washer, spring 8 162.128 1 BOLT 9 172.237 1 Cable fastener 10 101.076 1 Pad
ILL N° PART N° QT DESCRIPTION
11 101.024 1 GUIDE 12 162.060 2 SCREW 13 162.480 1 Bolt, cable to shaft 14 164.015 1 Washer, spring 15 161.028 1 Nut 16 011.065 1 Strap (to be adjusted) 17 172.054 1 Fastener 18 162.271 1 Screw 19 101.081 1 Cable abutment 20 164.022 1 Double spring washer 21 163.033 1 Plate, spring fixing 22 171.024 1 Spring 23 172.238 2 Clip, cable to bulkhead 24 172.239 1 Clip, kick-down cable, automatic 25 011.144 2 Engine mounting rubber
ILL N° PART N° QT DESCRIPTION
26 133.546 1 KIT, ENGINE MOUNTINGS FIXING 27 027.093 2 Gearbox mounting rubber 28 133.547 1 KIT, GEARBOX MOUNTING FIXING 29 011.171 1 RH engine mounting bracket 30 011.172 1 LH engine mounting bracket 31 011.173 1 RH restrictor 32 011.174 1 LH restrictor 33 162.056 8 Screw, bracket to engine 34 164.006 8 Washer, spring 36 162.211 4 Screw, cross member to body 37 164.006 4 Washer, spring 38 163.005 4 Washer, plain 39 132.358 1 Cross member
17© V a n G e s t e l B & C 2 0 0 5
Exhaust system
ILL N° PART N° QTY DESCRIPTION
1 110.028 1 FRONT PIPE 2 110.029 1 CENTRAL SILENCER 3 110.030 1 Rear silencer 4 111.067 2 EXHAUST CLAMP 5 111.068 1 FRONT FITTING KIT 6 111.069 1 FRONT mounting kit 7 111.014 1 INTERMEDIATE mounting kit 8 111.054 1 REAR mounting kit 9 111.057 1 Bracket (spotwelded on body), rear exhaust bracket to body 10 111.003 2 EXHAUST PACKING 11 161.030 6 Brass nuts 12 164.002 A/R 5/16” spring washer 13 161.002 A/R 5/16” UNF, nut 14 163.008 2 plain washer 15 111.060 4/8 Washer, heat insulation 16 111.066 2/4 Mounting rubber 17 111.063 2 Bracket 18 111.064 1 Bracket, hanger 19 111.065 1 Saddle 20 162.005 A/R Screw, 5/16” UNF
ILL N° PART N° QTY DESCRIPTION
21 162.076 A/R Screw, 1/4” UNF 22 164.012 A/R 1/4” spring washer 23 161.019 2 Nut, 1/4” UNF 24 111.006 1 Intermediate mounting rubber 25 111.007 1 Intermediate bracket 26 111.004 2 Bush & isolator 27 162.025 1 Bolt 28 111.058 1 Bracket, hanger, rear 29 111.055 1 Bracket, rear 30 111.062 2 Saddle 31 162.020 2 Screw, 5/16” UNF x 1” 32 011.175 1 Inlet manifold, 29G 33 011. 179 1 Connector, front hot spot 34 011.180 1 Connector, rear hot spot 35 162.085 4 Screw, long 36 162.096 4 Screw, short 37 163.001 8 Washer, plain 38 164.002 8 Washer, spring 39 011.177 2 Pech, welch 40 011.073 1 Adaptor, breather tube 41 168.023 1 Washer, fibre
ILL N° PART N° QTY DESCRIPTION
42 011.178 1 Adaptor, servo 43 110.106 1 Front exhaust manifold, 29G 44 110.107 1 Rear exhaust manifold, 29G 45 016.190 1 Gasket, manifold to head 46 011.176 1 Inlet manifold, 29GA 47 167.084 4 Stud 48 016.228 2 Gasket, hot spot 49 110.108 1 Front exhaust manifold, 29GA 50 110.109 1 Rear exhaust manifold, 29GA 51 161.002 4 Nut 52 164.002 4 Spring washer 53 167.074 15 Stud, manifold to head 54 163.014 15 Washer, plain 55 161.307 15 Nut 3/8” UNF, brass-long 56 167.013 6 Stud, exhaust pipe 57 167.085 6 Repair stud, to repair an oversized hole 7/16” UNC at manifold side and standard 3/8” UNF at exhaust side 58 200.481 1 3/8” UNC tap 200.482 1 7/16” UNC tap 59 200.554 1 8 mm drill
© V a n G e s t e l B & C 2 0 0 518
Emission control - USA
ILL N° PART N° QTY DESCRIPTION
1 104.001 1 Valve assembly, emission control 2 104.002 1 Spring, top 3 104.003 1 Plunger 4 081.044 1 Diaphragm 5 081.043 1 Plate, valve cover 6 081.042 1 Clip, spring 7 162.077 1 Bolt, valve to bracket 8 164.012 1 Washer, spring 9 161.019 1 Nut 10 104.004 1 Pump assembly, air (less pulley) 11 104.005 1 Valve, pressure relief 12 104.006 1 Tube, intake 13 104.007 1 Tube, exhaust 14 104.008 1 Pulley, air pump 15 163.008 4 Washer, plain 16 164.002 4 Washer, spring 17 162.005 4 Screw, pulley to pump 18 104.009 1 Belt, air pump driving 19 104.010 1 Pulley air pump driving 20 164.002 4 Washer, spring 21 162.020 4 Screw, driving pulley to crankshaft 22 162.492 2 Bolt, pump to mounting bracket 23 163.014 2 Washer, plain
ILL N° PART N° QTY DESCRIPTION
24 164.006 2 Washer, spring 25 161.003 2 Nut 26 104.011 1 Bracket, rear air pump mounting 27 104.012 1 Bracket, front air pump mounting 28 104.013 1 Link, adjusting 29 104.014 1 Bracket, adjusting link 30 162.128 1 Bolt, link to water manifold 31 162.081 1 Bolt, link and water pump to block 32 162.056 2 Bolt, rear bracket to block 33 162.041 2 Bolt, front bracket to front cover 34 164.002 4 Washer, spring 35 163.008 4 Washer, plain 36 162.020 1 Screw, link to bracket 37 164.002 1 Washer, spring 38 163.008 1 Washer, plain 39 161.002 1 Nut 40 104.015 1 Valve assemby, gulp 41 104.016 1 Valve, gulp 42 104.017 1 Bracket, gulp valve 43 162.493 3 Screw, self tapping 44 104.018 1 Tube, breather and gulp valve 45 104.019 1 Hose, control valve to separator 46 104.020 2 Hose, breather tube to valves
ILL N° PART N° QTY DESCRIPTION
47 104.021 1 Hose, check valve to ‘T’ piece 48 104.022 1 Hose, gulp valve to ‘T’ piece 49 104.023 1 Hose, ‘T’ piece to air pump 50 104.024 1 Hose, air pump to air cleaner 51 172.026 2 Clip, hose control valve to separator 51 172.026 2 Clip, hose breather 52 172.026 2 Clip, hose gulp valve to breather tube 53 172.114 4 Clip, hose valve and pump to ‘T’ piece 54 172.114 2 Clip, hose gulp valve to ‘T’ piece 54 172.114 2 Clip, hose air pump to air cleaner 55 172.246 1 Clip, hose air pump 56 104.025 1 Bracket, air pump hose clip 57 162.054 1 Screw, self tapping 58 104.026 1 Manifold assembly, air 59 104.027 2 Banjo 60 172.247 2 Clip 61 104.028 2 Bolt, banjo 62 168.106 4 Washer, banjo bolt 63 104.029 1 Valve, check 64 104.030 1 ‘T’ piece 65 104.031 1 Adaptor, control pipe to manifold 66 168.107 1 Washer, adaptor to manifold (fibre) 67 162.090 2 Screw, bracket to manifold
19© V a n G e s t e l B & C 2 0 0 5
Cooling & radiator
ILL N° PART N° QTY DESCRIPTION 1 062.027 1 Radiator top hose 2 062.028 1 Radiator bottom hose 3 172.240 4 Clamp, wire type 42 mm 4 060.019 1 Radiator assembly, NEW 060.063 1 Radiator assembly, Aluminium 5 061.107 1 RADIATOR PLUG 6 132.359 1 RH radiator mounting bracket 7 132.360 1 LH radiator mounting bracket 8 133.548 1 RH radiator top bracket 9 133.549 1 LH radiator top bracket 10 133.550 1 RH radiator bottom bracket 11 132.361 1 Cowl for fan 12 061.108 1 Upper seating, seal 13 061.109 1 Lower seating, seal 14 061.110 1 Hose, tank to filler neck 15 061.111 1 Hose, tank to filler neck, N. AMERICA 16 172.149 1 Clip, hose to cowl 17 061.112 1 Expansion tank, NOT N. AMERICA 18 061.088 1 Filler cap 19 061.113 1 Clamp for expansion tank
ILL N° PART N° QTY DESCRIPTION 20 061.114 2 Rubber pad 21 061.115 1 Expansion tank, N. AMERICA 22 061.116 2 Strap, expansion tank fixing 23 061.117 1 Channel. rubber packing 24 061.086 1 Water pump assembly 25 016.223 1 GASKET, WATERPUMP 26 162.481 5 BOLT 27 164.002 5 WASHER, SPRING 28 168.098 1 Washer, fibre 29 162.482 1 Screw, lubricator point 30 061.118 1 Adaptor for heater pipe 31 168.094 1 WASHER 32 061.119 2 Adaptor, by pass 33 168.099 2 WASHER 34 062.081 1 Hose, by pass 35 172....... 1 Clip 36 063.069 1 Connection hose, pipe to adaptor 37 172.241 2 Clip, hose 38 063.070 1 Pipe, water return 39 061.120 1 Pulley
ILL N° PART N° QTY DESCRIPTION 40 061.121 1 Spacer 41 162.483 3 Screw, spacer to pulley 43 061.099 1 Fan, 6 blade (plastic) 44 162.484 3 Screw, fan to spacer 45 063.071 1 Hose, heater to engine outlet 46 063.072 1 Hose, heater to heater pipe 47 062.016 A/R 1 Meter, heater hose 48 172.026 A/R Clamp, wire type 49 063.073 1 Water valve, early type 016.177 1 Gasket 50 168.100 1 Ring, valve sealing 51 063.074 1 Valve mounting bracket 52 063.067 1 Water valve, late type 53 063.075 1 Valve mounting bracket 54 063.004 1 Radiator for heater 55 063.005 2 GROMMET, radiator pipe 56 063.007 5 Clamp, heater box 57 063.038 1 Dust seal, intake 58 133.335 1 Mesh, intake 59 186.159 1 4 L. anti-freeze 60 061.123 1 Fan belt
© V a n G e s t e l B & C 2 0 0 520
Heater installation
21© V a n G e s t e l B & C 2 0 0 5
Heater installation
ILL N° PART N° QTY DESCRIPTION APPLICATION
1 063.164 1 Heater assembly 2 133.093 1 Heater box 3 133.092 1 Front cover heater box 4 063.167 1 Heater flap 5 162.061 4 Screw, heater flap fixing 6 063.007 5 Clip heater 7 063.004 1 Radiator 8 063.101 1 Felt pad kit radiator 9 121.281 1 Heater radiator foam ’67 on 10 063.005 2 Grommet radiator tube 11 121.243 1 Seal heater to body Cut out part to fit 12 121.028 1 Seal, foam 13 063.038 1 Dust seal heater to body 14 133.335 1 Heater fan grille 15 082.043 1 Heater motor, late type 16 133.091 1 Runner standard 063.126 1 Runner improved 17 172.637 1 Clip runner fixing to motor 18 162.051 3 Screw, motor to heater box 19 164.015 3 Washer, spring 20 163.013 3 Washer, plain 21 085.006 1 Sticker smiths heater small 22 085.007 1 Sticker smiths heater large 23 085.008 1 Sticker smiths heater motor 24 162.125 1 Screw, heater top 25 164.012 1 Washer, spring 26 163.011 1 Washer, plain 27 162.060 4 Screw, heater to bulkhead 162.051 1 Screw, heater to bulkhead 28 164.015 5 Washer, spring 29 163.011 5 Washer, plain 35 172.056 4 Trunnion, heater cables 36 162.135 4 Screw, trunnion 37 134.098 1 Cable, heat control USA plastic dash Longest cable, can be cut to length 38 172.055 1 Clip, heater motor cables 39 122.002 1 Grommet, heat cable bulkhead 40 063.028 1 Control heat LHD cars Europe 133.581 1 Control heat USA cars 41 172.023 2 Clamp cable to control 42 162.134 2 Screw for clamp 43 172.058 2 Clip for knob 44 172.059 2 Pin for knob 45 164.016 2 Washer, shakeproof 46 161.055 2 Nut, control fixing 47 163.034 2 Washer
ILL N° PART N° QTY DESCRIPTION APPLICATION
48 172.057 2 Rivet, knob position Only non illuminated knobs 49 063.031 1 Knob heat LHD European ‘63-’74 50 063.076 1 Knob heat LHD USA 55 063.029 1 Control air direction LHD Europe 133.582 1 Control air USA cars 56 134.021 1 Air control cable Metal dash 134.098 1 Air control cable USA plastic dash Longest cable, can be cut to length 57 172.023 1 Clamp cable to heater flap 58 164.015 1 Washer, spring 59 162.051 1 Screw 60 063.032 1 Knob air LHD European ‘63-’74 USA ‘63-’67 61 063.077 1 Knob air LHD USA 66 141.022 1 Air intake grille 67 133.868 1 Mesh, air intake grille, non original Keeps out leaves! 68 172.033 6 Clip, air intake fixing 69 172.233 6 Fix blind, also use when you fix 67! 70 133.090 2 Heater, door outlet 71 162.061 8 Screw, heater door outlet 74 063.035 2 Tube, heater to elbow 75 133.883 1 Plate airtube to body 76 . . . . . . . 4 Screw, plate fixing 77 063.034 2 Elbow 78 133.086 2 Hose, alu/paper 79 172.447 2 Clip demister hose 80 165.... 2 Screw for clip 81 163.184 2 Cup washer, black 82 063.036 1 Tube drain 83 172.060 1 Clamp for tube drain 84 133.087 1 Fresh air door 85 133.089 1 Knob door 86 133.088 1 Seal door 87 162.061 4 Screw, door fixing to body 88 172.061 1 Spring, fresh air door 89 163.010 1 Washer, plain 90 164.012 1 Washer, spring 91 162.029 1 Screw 92 063.122 1 Foam, heater hoses to heater 93 063.129 2 Hose, plastic 94 133.084 1 RH demister nozzle Europe ‘63-’74 USA 133.085 1 LH demister nozzle Europe ‘63-’74 USA 95 164.015 4 Washer, spring 96 161.024 4 Nut, demister fixing 97 133.083 2 Escutcheon, Europe ‘63-’74 USA ‘63-’67 98 063.124 1 RH demister nozzle USA 063.125 1 LH demister nozzle USA 99 063.123 2 Escutcheon
© V a n G e s t e l B & C 2 0 0 522
Carburettors & filters
ILL N° PART N° QTY DESCRIPTION
1 102.246 1 1967-68, AUD 150, front carburettor 102.247 1 1967-68, AUD 150, rear carburettor 102.248 1 1969, AUD 341, front carburettor 102.249 1 1969, AUD 341, rear carburettor 102.250 1 1968 (USA) AUD 287, front carburettor 102.251 1 1968 (USA) AUD 287, rear carburettor 102.252 1 1969 (USA) AUD 342, front carburettor 102.253 1 1969 (USA) AUD 342, rear carburettor 2 102.254 1 Service kit for one pair carburettors HS6, AUD 150 - AUD 341 or AUD 342 3 102.255 1 Rebuilding kit for one pair carburettors HS6, AUD 150 - AUD 341 or AUD 342 4 102.259 2 Sundries kit, including small parts: screws, springs, pins etc. (for 1 carb.) 5 102.261 2 Needle ST (AUD 150, AUD 341) 102.262 2 Needle KM (AUD 287) 102.263 2 Needle BAD (AUD 342) 6 102.216 2 Grose jet, improvement for the ‘SU’ needle and seat. This efficient fuel cut-off is based on a ball system 7 102.072 2 Needle and seat 102.156 2 Improved needle and seat with viton head
ILL N° PART N° QTY DESCRIPTION
8 102.107 2 Float 9 102.237 2 Gasket 10 102.264 2 Throttle spindle, standard size 102.281 2 Throttle spindle, oversize (use tool n° 102.275) 11 102.113 2 Set of two bushes to repair a worn out carburettor with standard shafts 12 102.265 2 DISC 1 3/4”, plain 102.266 2 DISC 1 3/4”, with over-run valve 13 102.050 4 Screw 14 102.267 1 Float chamber adaptor, FRONT 102.268 1 Float chamber adaptor, REAR 15 330.070 1 Special SU-Zenith carburettor oil 16 200.572 1 Carburettor synchroniser 17 185.124 2 1 3/4” SU DASHPOT COVERS, chrome plated 18 185.012 2 K&N air filter assembly 101.102 2 K&N replacement filter 19 186.043 1 K&N cleaner 20 186.042 1 K&N oil spray 21 101.163 1 Air cleaner assembly (NOT USA) 101.164 1 Air cleaner assembly (USA)
ILL N° PART N° QTY DESCRIPTION
22 101.165 2 Air filter element (NOT USA) 101.166 2 Air filter element (USA) 23 101.167 2 Rubber sealing ring 101.168 2 Rubber sealing ring (USA) 24 161.305 2 Air filter nut, square head 161.306 2 Air filter nut, square head (USA) 25 168.008 2 Washer, fibre 26 101.169 2 Distance piece 27 016.222 2 Gasket 28 101.170 1 Front mounting bracket (NOT USA) 101.172 1 Front mounting bracket (USA) 29 101.171 1 Rear mounting bracket (NOT USA) 101.173 1 Rear mounting bracket (USA) 30 171.024 3 Spring 31 101.174 1 Heatshield, (29G) 32 101.175 1 Plate, spring ANCHOR 33 101.176 1 Heatshield, (29GA) 34 101.177 1 Plate, spring ANCHOR 35 102.275 1 Reamer for oversize shafts (no bushes required)
23© V a n G e s t e l B & C 2 0 0 5
Fuel pump & tank
ILL N° PART N° QTY DESCRIPTION
1 101.052 1 Fuel Pump, S.U. 2 101.050 1 Fuel pump mounting rubber 3 132.095 1 Fuel pump mounting bracket 4 102.079 2 Banjo bolt 5 102.080 4 Washer, fibre 6 101.049 1 Flexible, Pump to pipe 7 102.098 1 Union-banjo 8 101.191 1 “FACET” High Capacity pump assembly for extra reliability, with a solonoid pump action. NEGATIVE EARTH ONLY 9 101.192 1 PAIR, UNIONS for 1/4” diameter pipe ends
ILL N° PART N° QTY DESCRIPTION
10 101.938 A/R 5 meters fuel pipe 11 161.070 A/R End piece, to be solded on 12 161.068 A/R Nipple, to be solded on 13 161.067 A/R Nut for nipple 161.068. 14 100.005 1 Fuel tank 15 133.205 1 Fuel tank bolting kit 16 101.060 1 Sealing ring 17 101.059 1 Locking ring 18 083.065 1 Sender unit 19 121.041 2 Strip-packing 20 101.053 1 Seal, tank to floor 21 172.115 2 Clamps
ILL N° PART N° QTY DESCRIPTION
22 101.054 1 Hose 23 101.055 1 Pipe, filler neck 24 101.056 1 Ferrule, filler neck 25 101.058 1 Chrome filler cap with lock 26 101.057 1 Filler cap 27 062.019 A/R 1 Meter fuel resistant hose, 6.3 mm 1.D. 062.020 A/R 1 Meter fuel resistant hose, 7,9 mm I.D. 28 172.051 A/R Clamp for 062.019 29 172.174 A/R Clamp for 062.020
© V a n G e s t e l B & C 2 0 0 524
Gearbox standard, part 1
ILL N° PART N° QTY DESCRIPTION
1 020.039 1 GEARBOX ASSEMBLY - REBUILD NOT INCLUDED: CLUTCH FORK, REMOTE CONTROL & GEAR LEVER, PINION SPEEDOMETER & HOUSING, CLUTCH DUST GAITER & DUST PLATE 2 016.165 1 Gasket 3 023.409 1 BOLTING KIT, GEARBOX TO ENGINE, DUST PLATE MOUNTING & STARTER MOUNTING 4 023.410 1 OVERHAUL KIT THIS KIT INCLUDES THE MOST IMPORTANT PARTS TO REBUILD YOUR GEARBOX. INCLUDED ARE ALL GASKETS, OIL SEALS, BEARINGS, NEEDLE CAGES, LAYSHAFT AND SYNCHRO RINGS 5 016.183 1 GASKET SET, ALL GASKETS NO OIL SEALS!
ILL N° PART N° QTY DESCRIPTION
6 020.040 1 Main casing 7 023.394 1 Stone guard 8 081.026 4 Screw 9 164.002 4 Washer, spring 10 023.001 1 Drain plug 11 023.392 1 Front cover & fork mounting plate 12 023.007 1 Front oil seal 13 016.162 1 Gasket, front cover 14 167.080 8 Stud 15 164.002 8 Washer, spring 16 161.002 8 Nut 17 023.279 1 Cover, gearbox side 18 016.164 1 Gasket 19 164.002 10 Washer, spring 20 162.086 10 Screw 21 020.029 1 Extension, rear 22 023.093 2 Dowel 23 016.163 1 Gasket
ILL N° PART N° QTY DESCRIPTION
24 167.079 3 Stud 25 161.002 3 Nut 26 162.085 5 Screw 27 164.002 8 Washer, spring 28 023.134 1 Button thrust, speedometer pinion 29 162.089 1 Plug (overdrive switch hole) 30 168.023 1 Gasket 31 023.167 1 Pin, location 32 023.393 1 Clutch lever 33 023.115 1 Bush 34 023.117 1 Bolt 35 161.025 1 Locknut 36 163.005 1 Washer 37 023.395 1 Dust cover 38 186.001 3 1 L. gearbox oil 39 190.060 1 MGC, original workshop manual
25© V a n G e s t e l B & C 2 0 0 5
Gearbox standard, part 2
ILL N° PART N° QTY DESCRIPTION
1 023.280 1 Shaft, 1 st motion 2 023.281 1 Bearing, ball 3 023.282 1 Spring ring 4 023.283 A/R Shim, 1 st motion shaft, .051 mm 023.284 A/R Shim, 1 st motion shaft, .102 mm 5 023.285 1 Bearing, needle roller 6 023.286 1 Lock washer 7 023.287 1 Nut, 1 st motion shaft 8 023.288 1 Layshaft 9 023.289 1 Laygear 10 023.290 1 Thrust washer, laygear front 11 023.291 A/R Thrust washer, rear, 3.91 to 3.96 mm 023.292 A/R Thrust washer, rear, 3.99 to 4.01 mm 023.293 A/R Thrust washer, rear, 4.06 to 4.09 mm 023.294 A/R Thrust washer, rear, 4.14 to 4.17 mm 12 023.301 2 Bearing, needle roller, laygear 13 023.302 1 Tube, distance, bearing 14 023.303 2 Spring ring 15 023.304 1 Reverse shaft 16 023.141 1 Screw 17 023.091 1 Lock washer 18 023.305 1 Reverse gear 19 023.306 1 Bush
ILL N° PART N° QT DESCRIPTION
20 023.307 1 Shaft, 3rd motion 21 023.050 1 Oil restrictor 22 023.308 1 Gear, reverse, 3rd motion shaft 23 023.386 1 1 st speed gear assembly 24 023.310 1 Bush 25 023.311 1 2nd speed gear assembly 26 023.312 1 Bush 27 023.313 1 1st and 2nd speed synchronizer assembly 28 023.069 3 Ball 29 023.314 3 Spring 30 023.315 2 Synchro ring 31 023.317 1 Washer, thrust, 2nd speed gear
32 023.318 1 Washer, thrust, interlocking 33 023.319 1 Sleeve, mainshaft 34 023.320 1 3rd speed gear assembly 35 023.310 1 Bush 36 023.321 1 3rd and 4th speed synchronizer assembly 37 023.069 3 Ball 38 023.314 3 Spring 39 023.316 2 Synchro ring
ILL N° PART N° QT DESCRIPTION
40 023.322 1 Bearing, 3rd motion shaft front 41 023.323 A/R Shim, .051 mm 023.324 A/R Shim, .102 mm 42 023.325 1 Housing for bearing 43 023.326 1 Peg locating 44 023.327 1 Distance piece, 3rd motion shaft 45 023 328 1 Speedometer gear (10 teeth) 46 172.005 1 Key, speedometer gear 47 023.331 1 Lock washer 48 023.332 1 Nut, 3rd motion shaft, front 49 023.333 1 Tube, distance (with sleeve) 50 023.057 1 Bearing, 3rd motion shaft. rear 51 023.334 A/R Shim, rear bearing, 0.002” 023.335 A/R Shim, rear bearing, 0.005” 023.336 A/R Shim, rear bearing, 0.010” 52 023.337 1 Circlip, 0.096” /0.098” 023.338 1 Circlip, 0.098” / 0 100” 023.339 1 Circlip, 0.100” / 0.102” 53 023 340 1 Oil seal, rear 54 020.029 1 Flange, 3rd motion shaft 55 023.342 1 Lock washer 56 161.299 1 Nut
© V a n G e s t e l B & C 2 0 0 526
Gearbox standard, part 3
ILL N° PART N° QTY DISCRIPTION
1 020.030 1 Housing, remote control 2 023.405 2 Bush 3 016.165 1 Gasket (included in gasket set) 4 162.469 4 Bolt, long 5 162.096 2 Bolt, short 6 164.002 6 Washer, spring 7 023.017 1 Breather assembly 9 023.355 1 Shaft, remote control 10 023.354 1 Lever, remote control 11 172.014 1 Key, lever to shaft 12 023.397 1 Bolt 13 164.002 1 Washer, spring 14 023.356 1 Plunger 15 023.106 1 Spring 16 023.253 1 Cap 17 168.013 1 Washer 18 023.361 1 Plunger, reverse selector 19 023.102 1 Spring 20 023.167 1 Pin 21 083.052 1 Switch, reverse light 22 168.023 1 Gasket 23 023.364 1 Lever, gear change 24 023.021 1 Bush, nylon 25 023.365 1 Knob, gear change 26 161.304 1 Nut lock, chrome plated
ILL N° PART N° QTY DISCRIPTION
27 023.150 2 Pin, locating 28 161.002 2 Washer, spring 29 023.356 1 Damper 30 023.106 1 Spring 31 023.253 1 Cap 32 168.013 1 Washer 33 023.372 1 Cover gear lever 34 162.471 3 Special screw 35 164.030 3 Double spring washer 36 023.378 1 Dipstick assembly 37 023.406 1 Bobbin 38 023.407 2 ‘0’ ring 39 023.408 1 Pinion, speedometer 40 023.128 1 Gasket 41 023.137 1 Bush, pinion 42 023.064 1 Oil seal 43 162.077 2 Screw 44 164.012 2 Washer, spring 45 172.234 1 Bracket for wiring clip 46 172.019 1 Wiring clip 47 163.007 1 Washer, plain 48 164.015 1 Washer, spring 49 161.024 1 Nut 50 023.343 1 Fork, reverse 51 023.344 1 Fork, 1 st and 2nd
ILL N° PART N° QTY DISCRIPTION
52 023.345 1 Fork, 3rd and 4th 53 023.346 1 Rod, reverse 54 023.347 1 Rod, 1 st and 2nd 55 023.348 1 Rod, 3rd and 4th 56 023.349 1 Selector, reverse 57 023.350 1 Selector, 1 st and 2nd 58 023.351 1 Selector, 3rd and 4th 59 162.087 3 Screw, fork locating 60 164.007 3 Washer, shakeproof 61 161.034 3 Lock nut 62 023.035 3 Screw, selector locating 63 023.352 1 Lever, selector 64 023.353 1 Shaft, selector lever 65 023.396 1 Screw, selector locating 66 161.300 1 Lock nut 67 023.398 1 Arm & bracket, interlocking 68 023.358 3 Plunger, fork rod 69 023.359 3 Spring, detent plunger 70 023.360 3 Plug, plunger 71 168.095 3 Washer, plug 72 023.027 1 Ball, reverse plunger 73 023.399 1 Spring, reverse detent 74 168.001 1 Washer, detent plug 75 023.400 1 Plug, reverse detent
27© V a n G e s t e l B & C 2 0 0 5
Gearbox overdrive, part 1
ILL N° PART N° QTY DESCRIPTION
1 020.042 1 GEARBOX & OVERDRIVE ASSEMBLY - REBUILD Not included: clutch fork, remote control & gear lever, pinion speedometer & housing, clutch dust gaiter & dust plate 2 020.043 1 GEARBOX FOR OVERDRIVE - REBUILD Not included: clutch fork, remote control & gear lever, pinion speedometer & housing, clutch dust gaiter & dust plate 3 016.165 1 Gasket 4 023.409 1 Bolting kit, gearbox to engine, dust plate mounting & starter mounting 5 023.411 1 OVERHAUL KIT This kit includes the most important parts to rebuild your gearbox. Included are: all gaskets, oil seals, bearings, needle cages, layshaft and synchro rings 6 016.184 1 Gasket set, all gaskets, NO oil seals! 7 023.040 1 Main casing 8 167.080 8 Stud, front cover 9 167.079 3 Stud, overdrive adaptor 10 023.001 1 Plug, drain 11 023.392 1 Front cover 12 023.007 1 Oil seal
ILL N° PART N° QTY DESCRIPTION
13 016.162 1 Gasket 14 164.002 8 Washer, spring 15 161.002 8 Nut 16 023.279 1 Side cover 17 016.164 1 Gasket 18 164.002 10 Washer, spring 19 162.086 10 Screw 20 020.038 1 Adaptor overdrive 21 023.093 1 Dowel 22 016.166 1 Gasket 23 161.002 3 Nut 24 164.002 3 Washer, spring 25 162.085 5 Screw 26 164.002 5 Washer, spring 27 020.030 1 Remote control housing 28 023.405 2 Bush 29 016.165 1 Gasket 30 162.469 4 Screw 31 162.096 2 Screw 32 164.002 6 Washer, spring 33 023.093 2 Dowel, remote control housing 34 023.394 1 Guard, stone clutch housing 35 164.002 4 Washer spring 36 081.026 4 Screw 37 023.364 1 Lever, change speed 38 023.365 1 Lever knob 39 161.304 1 Lock nut
ILL N° PART N° QTY DESCRIPTION
40 023.021 1 Bush, lever 41 023.150 2 Pin, lever locating 42 164.002 2 Washer spring 43 023.356 1 Plunger, lever damping 44 023.106 1 Plunger, spring 45 023.253 1 Plunger, retaining cap 46 168.013 1 Washer, cap 47 023.372 1 Lever seat cover 48 162.471 3 Cover screw 49 164.030 3 Washer, spring, double coil 50 083.052 1 Switch, reverse light or overdrive 51 168.023 1 Washer, switch 52 023.165 1 Spring, plunger 53 023.391 1 Isolation switch, plunger 54 023.167 1 Pin, plunger locating 55 023.393 1 Lever, clutch withdrawal 56 023.115 1 Bush 57 023.117 1 Lever, bolt 58 163.005 1 Washer, bolt 59 161.025 1 Nut 60 023.395 1 Dust lever, cover 61 023.378 1 Indicator assembly, oil level 62 023.406 1 Bobbin 63 023.407 2 Packing ring 64 186.001 4 1 L. gearbox oil (capacity 3.4 L) 65 190.060 1 MGC original workshop manual
© V a n G e s t e l B & C 2 0 0 528
Gearbox overdrive, part 2
ILL N° PART N° QTY DESCRIPTION
1 024.910 1 Shaft, 1 st motion 2 023.281 1 Bearing 3 023.282 1 Spring ring 4 023.283 A/R Shim, 0.002” 023.284 A/R Shim, 0.004” 5 023.285 1 Bearing, needle roller 6 023.286 1 Lock washer 7 023.287 1 Nut 8 023.288 1 Layshaft 9 023.403 1 Laygear 10 023.290 1 Thrust washer, front 11 023.291 A/R Thrust washer, rear, 3.91 to 3.96 mm 023.292 A/R Thrust washer, rear, 3.99 to 4.01 mm 023.293 A/R Thrust washer, rear, 4.06 to 4.09 mm 023.294 A/R Thrust washer, rear, 4.14 to 4.17 mm 12 023.301 2 Bearing, needle roller 13 023.302 1 Tube, distance, bearing 14 023.303 2 Spring ring
ILL N° PART N° QTY DESCRIPTION
15 023.304 1 Reverse shaft 16 023.141 1 Screw, shaft locking 17 023.091 1 Lock washer 18 023.305 1 Reverse gear 19 023.306 1 Bush 20 023.379 1 Shaft, 3rd motion 21 023.050 1 Oil restrictor 22 023.308 1 Gear, reverse, mainshaft 23 023.386 1 Gear, 1 st speed, mainshaft 24 023.310 1 Bush 25 023.404 1 Gear, 2nd speed, mainshaft 26 023.312 1 Bush 27 023.313 1 1 st and 2nd speed synchronizer 28 023.069 3 Ball 29 023.314 3 Spring 30 023.315 2 Ring, baulk, 1 st and 2nd speed 31 023.317 1 Washer, thrust, 2nd speed gear 32 023.318 1 Washer, thrust, interlocking
ILL N° PART N° QTY DESCRIPTION
33 023.319 1 Sleeve, mainshaft 34 023.401 1 Gear, 3rd speed 35 023.310 1 Bush 36 023.321 1 3rd and 4th speed synchronizer 37 023.069 3 Ball 38 023.314 3 Spring 39 023.316 2 Ring, baulks, 3rd and 4th speed 40 023.402 1 Bearing, 3rd motion shaft 41 023.334 A/R Shim, 0.002” 023.335 A/R Shim, 0.005” 023.336 A/R Shim, 0.010” 42 023.387 1 Housing for bearing 43 023.388 1 Distance piece, 3rd motion shaft 44 023.390 1 Nut 45 023.389 1 Lock washer 46 023.331 1 Lock washer, front 47 023.332 1 Nut, 3rd motion shaft, front
29© V a n G e s t e l B & C 2 0 0 5
Propellor shaft
ILL N° PART N° QTY DESCRIPTION
1 023.343 1 Fork. reverse 2 023.344 1 Fork, 1 st and 2nd 3 023.345 1 Fork, 3rd and 4th 4 023.346 1 Rod, reverse 5 023.347 1 Rod, 1 st and 2nd 6 023.348 1 Rod, 3rd and 4th 7 023.349 1 Selector, reverse 8 023.350 1 Selector, 1 st and 2nd 9 023.351 1 Selector, 3rd and 4th 10 162.087 3 Screw, fork locating 11 164.007 3 Washer, shakepoof 12 161.034 3 Lock nut 13 023.035 3 Screw, selector locating 14 023.352 1 Lever, selector 15 023.353 1 Shaft, selector lever 16 023.396 1 Screw, selector lever locating 17 161.300 1 Lock nut 18 023.354 1 Lever, remote control shaft
ILL N° PART N° QTY DESCRIPTION
19 172.014 1 Key 20 023.397 1 Bolt 21 164.002 1 Spring washer 22 023.355 1 Shaft, remote control 23 023.356 1 Plunger, shaft damping 24 023.106 1 Spring, plunger 25 023.253 1 Cap, retaining plunger 26 168.013 1 Cap washer 27 023.398 1 Arm, interlocking 28 023.358 3 Plunger, fork rod 29 023.359 3 Spring, detent plunger 30 023.360 3 Plug, plunger 31 168.095 3 Washer, plug 32 023.361 1 Plunger, reverse selector 33 023.102 1 Spring, plunger 34 023.167 1 Pin locating plunger 35 023.027 1 Ball 36 023.399 1 Spring, detent plunger
ILL N° PART N° QTY DESCRIPTION
37 023.400 1 Plug, detent spring 38 168.001 1 Washer, plug 39 134.147 1 Propeller shaft, reproduction 40 134.148 1 Propeller shaft, original with rubber dust cap fitted 41 032.207 2 Flange, yoke 42 032.193 2 Universal joint with greaser 43 032.046 2 Grease 44 032.208 1 Sleeve yoke 45 032.209 1 Sealing ring & dust cap 46 032.210 1 Rubber boot, will only fit original propeller shaft 47 162.463 4/8 BOLT (USE 4 PIECES ONLY WHEN OVERDRIVE IS FITTED) 48 162.470 4 BOLT, AT OVERDRIVE 49 161.025 8 SELF LOCKING NUTS 50 174.028 2 LOCKING PLATE AT OVERDRIVE 51 023.021 1 Nylon bush, gear lever 52 023.412 1 Nylon bush
© V a n G e s t e l B & C 2 0 0 530
Overdrive
31© V a n G e s t e l B & C 2 0 0 5
Overdrive
ILL N° PART N° QTY DESCRIPTION
1 020.041 1 Overdrive unit assembly 2 025.142 1 Filter, ‘0’ ring and oil seal KIT. Most problems start with a dirty filter or old and stiff ‘0’ rings. Before starting a complete overhaul, you can save yourself a lot of work and costs by first changing these. 3 025.106 1 Solenoid valve kit 4 025.107 1 Coil solenoid 5 025.108 1 Grommet 6 025.086 1 ‘0’ ring 7 025.087 1 ‘0’ ring 8 025.088 1 ‘0’ ring 9 025.139 1 plate end 10 016.215 1 Gasket 11 025.089 1 Filter and gasket, sump 12 025.109 1 Magnet set 13 025.110 1 Sump 14 164.016 6 Washer, shakeproof 15 162.475 6 Screw, sump 16 025.112 1 Rear casing 17 025.111 1 Annulus 18 025.113 1 Bearing, planet 19 025.114 1 Carrier, planet 20 025.069 1 Thrust washer, free wheel inner to annulus 21 025.115 1 Inner member, free wheel 22 025.035 12 Roller, steel 23 025.034 1 Cage, free wheel 24 025.036 1 Spring, cage 25 025.067 1 Ring, case spring 26 025.068 1 Oil thrower 27 025.116 1 Spring ring, mainshaft 28 025.117 1 Spacer 29 025.118 1 Spacer, selective 30 025.124 1 Bearing 11/4” x2 3/4” xl 1/16” 31 025.125 1 Bearing 30 x 62 x 16 mm 32 025.126 1 Oil seal, rear casing 33 025.140 1 Flange, coupling 34 024.141 1 Washer 35 161.303 1 Nut 36 162.470 4 Special bolt, ‘D’ head 37 161.025 4 Self locking nut 38 025.129 1 Bearing, speedometer 39 016.050 1 Oil seal 40 025.087 1 ‘0’ ring 41 025.130 1 Lock plate, speedometer 42 164.029 1 Lock washer, speedometer 43 162.029 1 Screw
ILL N° PART N° QTY DESCRIPTION
44 025.131 1 Pinion, speedometer 45 025.132 1 Gear, speedometer 46 025.103 16 Nut 47 164.012 16 Washer, spring 48 025.073 1 Main casing 49 167.030 8 Stud, main casing to adaptor 50 167.081 6 Stud, main casing to rear casing 51 167.082 2 Stud, main casing to rear casing 52 025.074 1 Ring, brake 53 016.167 1 Gasket, adaptor to main casing 016.216 1 Gasket, overdrive to adaptor 54 025.075 1 Housing, thrust bearing 55 025.076 4 Pin, housing 56 025.077 1 Bearing, thrust 57 025.078 1 Plate, bearing retainer 58 025.079 1 Sliding member 59 172.230 1 Circlip 60 025.080 1 Sunwheel 61 172.231 1 Ring snap 62 023.380 1 Cam 63 023.381 1 Key 64 172.229 1 Circlip 65 025.137 1 Dowel, spring, oil transfer pump 66 025.081 1 Body pump 67 025.082 1 ‘0’ ring, body 69 025.090 1 Plunger, pump 70 025.091 1 Spring, pump plunger 71 025.092 1 Valve, non return-pump 72 025.093 1 Plug, pump 73 025.083 1 ‘0’ ring, plug 74 025.094 1 Tube, suction pump 75 025.136 1 Valve, relief and low pressure 76 025.084 1 ‘0’ ring 77 025.096 1 Filter, relief valve body 78 025.085 1 ‘0’ ring 79 168.097 1 Washer, relief valve plug 80 025.097 1 Plug, relief valve 81 025.098 4 Washer, thrust rod 82 025.099 4 Rod, thrust 83 025.138 4 Spring, clutch engagement 84 025.101 4 Spring, clutch release 85 172.232 4 Circlip, thrust rod 86 025.102 2 Bridge piece 87 174.016 4 Washer, tab 88 025.103 4 Nut 89 025.104 1 Piston 90 025.105 1 ‘0’ ring
© V a n G e s t e l B & C 2 0 0 532
Automatic transmission
ILL N° PART N° QTY DESCRIPTION
1 016.217 1 Gasket set 2 016.218 1 Oil pan gasket 3 016.219 1 Gasket, pump adaptor to convertor support 4 016.220 1 Gasket, extension to case 5 016.221 1 Oil seal, front pump
ILL N° PART N° QTY DESCRIPTION
6 016.012 1 Oil seal, rear 7 011.163 1 Crankshaft bush 8 011.164 1 plate crankshaft back, thin 011.165 1 Plate support, thick 9 174.007 1 LOCK PLATE 10 011.166 1 Starter ring
ILL N° PART N° QTY DESCRIPTION
11 174.029 4 LOCK PLATE 12 020.047 1 Convertor 13 083.430 2 Switch inhibitor or reverse lights 14 101.159 1 Cable, KICKDOWN 15 134.149 1 Cable, selector control 16 020.046 1 Automatic transmission assembly
ATF oil
Part nr.
300.137
33© V a n G e s t e l B & C 2 0 0 5
Front suspension, part 1
ILL N° PART N° QTY DESCRIPTION
1 042.305 2 Front, lower arm 2 042.306 2 Rear, lower arm 3 162.048 4 Bolt 4 161.025 4 Nut, nylon locking 5 164.006 4 Washer, spring 6 042.307 2 Standard shock absorber, front 042.308 2 “SPAX” front shock absorber 042.309 2 “KONI” adjustable shock absorber 7 041.293 2 Shock absorber bottom rubber 041.507 2 Superflex polyurethane bottom rubber 13 041.294 2 Shock absorber bottom pin 14 041.295 2 Collar, split 15 041.296 2 Distance piece 16 041.297 2 Swivel pin, bottom 17 041.298 2 Swivel pin bush, outer fulcrum 048.166 2 Superflex polyurethane Swivel pin bush, outer fulcrum 18 041.299 4 Washer, king pin spacer
ILL N° PART N° QTY DESCRIPTION
19 161.277 4 Nut, 1/2” 20 164.011 4 Spring washer, 1/2” 21 041.300 4 Fulcrum pin, inner 22 041.301 2 Bush, torsion 048.164 2 Superflex polyurethane bush, torsion 23 161.277 2 Nut 24 164.011 2 Spring washer 25 042.310 2 Front top arm 26 042.311 2 Rear top arm 27 042.312 2 Pivot bracket 28 041.302 4 Shim pivot bracket, 2.59 mm 29 041.303 A/R Shim pivot bracket, 1.62 mm 041.304 A/R Shim pivot bracket, 0.9 mm 30 041.305 4 Bush, top arms, wishbone 048.161 4 Superflex polyurethane bush, top arms, wishbone 31 163 … 4 Washer, inner 32 163 … 4 Washer, outer 33 164.011 4 Washer, spring
ILL N° PART N° QTY DESCRIPTION
34 041.032 4 Castle nut, 1/2” UNF 35 167.066 4 Stud, pivot bracket 36 174.026 4 Lock plate 37 162.081 4 Bolt 38 161 … 4 Nut 39 164 … 4 Washer, spring 40 041.057 2 Pi n top 41 041.056 2 Bush top trunion 041.511 2 Superflex polyurethane bush, top trunion 42 161.043 2 Nut 43 041.306 2 Bump, rubber 44 162.005 4 Screw, 5/16” UNF 45 164.002 4 Washer, spring 46 041.325 2 Tie rod bush, front 048.162 2 Superflex polyurethane tie rod bush, front 47 041.922 4 Superflex polyurethane bush, damper pin
See page 89 for Superflex bushes
© V a n G e s t e l B & C 2 0 0 534
Front suspension, part 2
ILL N° PART N° QTY DESCRIPTION
1 042.313 2 Torsion bar 2 041.573 1 RH lever, vernier 3 041.308 1 LH lever, vernier 4 041.309 2 Retaining plate 5 162.081 2 Bolt 6 161.012 2 Nut, self locking 7 163.001 2 Washer, plain 8 164.002 2 Washer, spring 9 041.310 2 Block, adjustment 10 041.311 2 Plate, reinforcement 11 162.069 4 Bolt 12 164.006 4 Washer, spring 13 161.026 4 Nut 14 162.428 2 Bolt, vernier
ILL N° PART N° QTY DESCRIPTION
15 161.279 2 1/2” UNF FLAT NUT 16 042.314 2 Tie-bar 17 162.276 2 Bolt 18 161.032 2 Nut 19 164.021 2 Washer, spring 20 041.312 4 Bush, tie-bar, rear 048.163 4 Superflex polyurethane bush, tie-bar, rear 21 041.313 2 Retaining bush 22 041.314 2 Nut and washer, tie-bar 23 041.032 2 Castle nut 24 042.315 1 Bar assembly anti-roll 25 041.062 2 Bush, anti-roll bar 26 042.316 2 LINK, anti-roll bar
ILL N° PART N° QTY DESCRIPTION
27 161.032 2 Nut 28 164.021 2 Washer, spring 29 162.104 2 Bolt, link to anti-roll 30 161.044 2 Nut 31 164.021 2 Washer, spring 32 041.315 2 Bush, anti-roll bar 048.165 2 Superflex polyurethane bush, anti-roll bar 33 041.316 2 Strap for bush 34 162.005 4 Screw, 5/16” UNF x 3/4” 35 164.002 4 Washer, spring 36 041.317 2 Upper locator 37 041.318 2 Lower locator 38 162.140 4 Screw 39 164.015 4 Washer, spring
See page 89 for Superflex bushes
35© V a n G e s t e l B & C 2 0 0 5
Front suspension, part 3
ILL N° PART N° QTY DESCRIPTION
1 042.299 1 RH axle assembly 2 042.300 1 LH axle assembly 3 041.282 2 Bush top (included in king pin kit) 4 041.283 2 Bush bottom (included in king pin kit) 5 042.301 1 KING PIN KIT, for 2 sides 7 041.284 4 Ring sealing 10 041.285 2 Top tube, dust excluder 11 041.286 2 Spring, dust excluder 12 041.287 2 Bottom tube, dust excluder 13 041.066 2 Lubricator, top 14 041.068 2 Lubricator, bottom
ILL N° PART N° QTY DESCRIPTION
15 041.288 1 RH top trunion 16 041.289 1 LH top trunion 17 041.290 2 Pad reactor, (king pin top nut) 18 174.025 2 Plate locking, pad reactor 19 042.302 1 RH steering lever 20 042.303 1 LH steering lever 21 162.106 4 Bolt 22 042.304 2 Hub for disc wheels 23 167.033 10 Stud for disc wheels 24 161.046 10 Nut for disc wheels 25 042.124 1 RH wire wheel hub 26 042.125 1 LH wire wheel hub
ILL N° PART N° QTY DESCRIPTION
27 041.074 2 Collar for oil seal 28 041.075 2 Oil seal 29 041.076 2 Oil seal and bearing kit 30 041.291 2 Spacer for bearing 31 041.078 A/R Shim .076 mm 041.079 A/R Shim. 1 26 mm 041.080 A/R Shim .254 mm 041.081 A/R Shim.7 64 mm 33 041.292 2 Washer, retaining 34 041.093 2 Nut, captive 35 041.017 2 Cap, disc wheels 36 041.082 2 Cap, wire wheels
© V a n G e s t e l B & C 2 0 0 536
Clutch & hydraulics
ILL N° PART N° QTY DESCRIPTION
1 027.086 1 Clutch pedal 2 027.087 1 Clutch pedal, USA 3 027.088 2 Bush 4 027.001 1 Pedal rubber 5 027.089 1 Tube, distance 6 171.003 1 Spring, pedal 7 172.045 1 Clevis pin 8 163.001 1 Washer, plain 9 053.069 1 Clutch master cylinder 10 052.159 1 Plunger 11 052.160 1 Valve spacer 12 052.161 1 Retainer, spring 13 052.162 1 Push rod 14 052.163 1 Filler cap 15 052.164 1 Stem 16 052.165 1 Spring 17 052.166 1 Washer 18 052.072 1 Repair kit
ILL N° PART N° QTY DESCRIPTION
19 163.001 1 Washer, plain 20 164.002 1 Washer, spring 21 161.002 1 Nut 22 162.088 1 Bolt 23 164.002 1 Washer, spring 24 161.001 1 Nut 25 133.510 1 Spacer 26 027.064 1 Slave cylinder assembly 27 052.167 1 Piston 28 052.168 1 Spring 29 052.169 1 Piston retainer 30 052.078 1 Bleed screw 31 027.090 1 Repair kit, slave cylinder 32 027.091 1 Push rod 33 172.089 1 Clevis pin 34 163.001 1 Washer, plain 35 162.103 2 Bolt, UNC 36 164.006 2 Washer, spring
ILL N° PART N° QTY DESCRIPTION
37 054.124 1 LHD, clutch pipe (132 cm) 054.125 1 RHD, clutch pipe (69 cm) 38 052.171 1 Banjo 39 052.015 1 Banjo bolt 40 168.014 1 Washer, gasket 41 168.010 1 Washer, gasket 42 172.042 1 (RHD only) clip, pipe to body 43 163.008 1 Washer, plain 44 133.511 1 Bracket, clutch hose 45 027.092 1 Clutch hose 46 168.014 1 Washer, gasket 47 161.009 1 Lock nut 48 172.074 1 Plate, locking 49 164.025 1 Lock washer 50 052.117 1 Rubber grease 51 053.018 A/R 1 L. Silicone brake fluid 52 053.039 A/R 1 L. Dot 4 brake fluid
37© V a n G e s t e l B & C 2 0 0 5
Brake pedals
ILL N° PART N° QTY DESCRIPTION
1 027.094 1 LHD and RHD, BRAKE PEDAL 2 027.095 1 RHD AUTOMATIC, BRAKE PEDAL 3 027.096 1 LHD AUTOMATIC, BRAKE PEDAL 4 027.097 1 USA, BRAKE PEDAL 5 027.098 1 USA, RHD AUTOMATIC, BRAKE PEDAL 6 027.099 1 USA, LHD AUTOMATIC, BRAKE PEDAL 7 027.088 1 Pedal bush 8 027.001 2 Pedal rubber, brake or clutch 9 027.100 1 Pedal rubber, automatic 10 027.089 1 Distance tube 11 027.101 1 Distance tube, automatic 12 162.461 1 Bolt, pedal fixing
ILL N° PART N° QTY DESCRIPTION
13 164.011 1 Washer, spring 14 161.045 1 Nut 15 027.102 1 Distance piece, pedal fulcrum 16 172.045 1 PIN, CLEVIS 17 163.001 1 Washer, plain 18 171.003 1 Spring 19 133.519 1 Pedal box 133.520 1 Pedal box, BENELUX & FRANCE only 133.521 1 Pedal box, USA 20 162.077 2 SCREW, box to dash 21 161.019 1 Nut 22 163.010 2 Washer, plain
ILL N° PART N° QTY DESCRIPTION
23 164.012 2 Washer, spring 24 162.077 1 Screw, box to platform 25 163.011 1 Washer, plain 26 164.012 1 Washer, spring 27 133.522 1 Cover, master cylinder box 28 133.523 1 COVER, USA, WITH SWITCH ADAPTOR 29 162.139 4 Screw 30 163.007 4 Washer, plain 31 164.015 4 Washer, spring 32 121.194 1 Seal, box to body 33 121.195 1 Seal, cover to box
© V a n G e s t e l B & C 2 0 0 538
Master brake pump - single
ILL N° PART N° QTY DESCRIPTION
1 053.070 1 Master brake pump, UK 2 052.161 1 Retainer, spring 3 052.177 1 Plugner 4 052.165 1 Spring 5 052.164 1 Stem, valve 6 052.175 1 Filler cap 7 052.176 1 Gasket only 8 052.160 1 Spacer, valve 9 052.178 1 Push-rod 10 052.174 1 Repair kit 11 053.071 1 Master brake pump, BENELUX & FRANCE
ILL N° PART N° QTY DESCRIPTION
12 133.524 1 Block, reinforcing 13 167 … 2 Stud (not fitted when automatic) 14 163.001 1 Washer, plain 15 164.002 1 Washer, spring 16 161.002 1 Nut 17 162.088 1 Screw, master cylinder to box 18 164.002 1 Washer, spring 19 161.002 1 Nut 20 133.510 1 Spacer, master cylinder to box 21 053.072 1 plastic tank, brake fluid 22 052.179 1 Filler cap & gasket (incl. n° 23+24) 23 052.180 1 Baffle, fluid
ILL N° PART N° QTY DESCRIPTION
24 052.181 1 Gasket, filler cap 25 133.525 1 Bracket, tank to bulkhead 26 162.060 2 Screw 27 163.007 2 Washer, plain 28 164.015 2 Washer, spring 29 162.139 1 Screw, bracket clamping 30 164.017 1 Double spring washer 31 052.182 1 Hose, tank to pipe 32 052.183 1 Pipe, hose to pump 33 172.049 2 Clamp, hose securing 34 052.117 1 Rubber grease
39© V a n G e s t e l B & C 2 0 0 5
Master brake pump - double
ILL N° PART N° QTY DESCRIPTION
1 053.073 1 Master brake cylinder, USA 2 052.186 1 Stem, valve 3 052.187 1 Spacer, valve 4 052.188 1 Spring, return, secondary plunger 5 052.189 1 Retainer, spring 6 052.190 1 Plunger, secondary 7 052.191 1 Spring, return, primary plunger 8 052.192 1 Plunger, primary 9 052.193 1 Push-rod 10 172.220 1 Circlip, retaining, push-rod 11 052.194 1 Retainer, tipping valve 12 052.195 1 Cover and adaptor, inlet 13 162 … 2 Screw, cover to body 14 164 … 2 Washer, spring
ILL N° PART N° QTY DESCRIPTION
15 052.196 2 Nut, retaining 16 172.221 2 Circlip, retaining 17 052.185 1 Kit, repair 18 162.072 2 Screw 19 164.006 2 Washer, spring 20 053.074 1 Tank assembly, brake fluid (plastic) 21 052.179 1 Cap, filler assembly 22 052.180 1 Baffle, fluid 23 052.181 1 Gasket, filler cap 24 133.525 1 Bracket, tank 25 162.060 2 Screw 26 163.007 2 Washer, plain 27 164.015 2 Washer, spring 28 162.139 1 Screw
ILL N° PART N° QTY DESCRIPTION
29 164.017 1 Washer, spring 30 052.182 2 Hose, tank to pump 31 052.183 1 Pipe, hose to master cylinder (18 cm) 052.184 1 Pipe, hose to master cylinder (8 cm) 32 172.049 4 Clip, hose securing 33 053.075 1 Master brake cylinder, NORTH AMERICA 34 053.076 1 Reservoir 35 052.197 1 Filler cap & seal 36 052.198 1 Seal, filler cap 37 052.199 1 Baffle, filler cap 38 052.117 1 Rubber grease 39 053.018 A/R 1 L silicone brake fluid 40 053.039 A/R 1 L DOT 4 brake fluid
© V a n G e s t e l B & C 2 0 0 540
Girling servo’s
ILL N° PART N° QTY DESCRIPTION
1 053.077 1 SERVO ASSEMBLY (Oct. ‘67 till March ‘68) 2 052.202 1 Piston, valve operating 3 052.203 1 Abutment, piston spring 4 052.204 1 Spring, piston return 5 052.205 1 Retainer, spring 6 052.206 1 Circlip, retainer 7 052.207 1 Spring, piston return 8 052.208 1 Spring, piston 9 053.078 1 PISTON and ROD Assembly 10 052.209 1 Bush, piston rod guide 11 052.210 1 Spring, cylinder return 12 052.211 1 Spring, control valve return 13 052.212 1 AIR FILTER KIT, (incl. n° 14, 15) 052.213 1 Air filter, element only
ILL N° PART N° QTY DESCRIPTION
14 052.214 1 Seal, air filter to body 15 052.215 1 Air filter cover 16 023.277 1 Ban 17 053.079 1 REPAIR KIT SERVO 18 052.216 1 Air valve repair kit 19 052.217 1 Varve, non return (ear(y typeJ 20 052.200 1 Bolt for valve 21 168.094 1 Gasket, valve 22 053.080 1 SERVO ASSEMBLY (March ‘68 - on) 23 132.333 1 LHD, SERVO SUPPORT BRACKET 24 132.334 1 RHD, SERVO SUPPORT BRACKET 25 121. 196 1 Seal, under servo bracket 26 162.005 A/R Screw 5/16” UNF x 3/4” 162.077 A/R Screw 1/4” UNF x 3/4”
ILL N° PART N° QTY DESCRIPTION
27 161.002 A/R NUT 5/16” UNF 161.019 A/R NUT 1/4” UNF 28 163.001 A/R WASHER PLAIN, 5/16” 163.010 A/R WASHER PLAIN, 1/4” 29 164.002 A/R WASHER SPRING, 5/16” 164.012 A/R WASHER SPRING, 1/4” 30 162.056 3 SCREW 3/8” UNF x 3/4” 31 164.006 3 WASHER SPRING 32 052.201 1 Valve, non return 33 053.081 1 Servo repair kit 34 052.218 1 Sleeve, rubber 35 052.219 1 Adaptor 36 052.220 1 Grommet for adaptor 37 052.221 1 Band, crimping
41© V a n G e s t e l B & C 2 0 0 5
Lockheed servo systems
ILL N° PART N° QTY DESCRIPTION
1 053.082 A/R LOCKHEED SERVO ASSEMBLY NOT ORIGINAL BUT THE PERFECT ALTERNATIVE FOR REPLACING THE GIRLING SERVO. PLEASE ALSO USE OUR SPECIAL CONVERSION BRACKETS (See below) 2 052.222 1 Piston, valve air 3 052.223 1 Housing, lower, air control valve 4 162 … 3 Screw, housing to body 5 052.224 1 Support, diaphragm 6 052.225 1 Diaphragm, air control valve 7 052.226 1 Cover, air control valve
ILL N° PART N° QTY DESCRIPTION
8 162 … 5 Screw, cover to housing 9 052.227 1 Push-rod 10 052.228 1 Spacer 11 052.229 1 Bearing 12 052.230 1 Plate, abutment 13 162 … 3 Screw, shell to body 14 052.231 1 Spring, vacuum piston return 15 053.083 1 Piston, vacuum 16 052.232 1 Key, piston to push-rod 17 052.233 1 Pipe, valve cover to end cover 18 052.234 1 Valve, non return 19 053.084 1 SERVO REPAIR KIT
ILL N° PART N° QTY DESCRIPTION
20 132.335 1 Conversion bracket to fit a lockheed on a girling installation 21 054.105 1 1 meter servo vacuum hose, 1/4” I.D. 22 052.235 1 ‘Y’ piece, vacuum hose 23 172.151 A/R Hose clips, 3/4” x 3/16” 172.152 A/R Hose clips, 3/4” x 1/4” 172.153 A/R Hose clips, 3/4” x 5/16” 172.154 A/R Hose clips, 7/8” x 3/16” 172.155 A/R Hose clips, 7/8” x 1/4” 172.156 A/R Hose clips, 7/8” x 5/16”
© V a n G e s t e l B & C 2 0 0 542
Brake pipes and hoses
43© V a n G e s t e l B & C 2 0 0 5
Brake pipes and hoses
ILL N° PART N° QTY DESCRIPTION
1 054.127 1 LHD, SINGLE SYSTEM BRAKE PIPE SET 054.128 1 LHD, DOUBLE SYSTEM BRAKE PIPE SET 054.129 1 RHD, SINGLE SYSTEM BRAKE PIPE SET 2 054.130 2 FRONT BRAKE HOSE 3 054.077 1 REAR BRAKE HOSE 4 168.014 1 GASKET rear brake hose 5 172.074 5 LOCKING plate 6 164.025 5 Star washer 7 161.009 5 LOCK NUT 8 052.236 1 Connector 5 way (early) G-CN1-101 to 1968 052.237 1 Connector 5 way G-CN1-1969-on 9 168.014 1 Gasket, fitted on early type only! 10 083.412 1 STOP SWITCH (early), to be used with gasket 084.004 1 STOP SWITCH WITH CONE THREAD 11 163.035 1 Spacer 12 083.313 1 Switch stop light, fitted on pedal box cover 13 161.009 1 LOCKING NUT 14 053.085 1 Pressure failure switch (to G-CNl-5962) 053.086 1 Pressure failure switch (from G-CNl-5963)
ILL N° PART N° QTY DESCRIPTION
15 052.238 1 Repair kit, pressure failure switch (to G-CN1-5962) 052.239 1 Repair kit, pressure failure switch (from G-CN1-5963) 16 083.413 1 WARNING SWITCH 17 023.277 1 BALL, SWITCH OPERATING 18 052.240 1 Connection 3 way (rear axle) 19 133.529 1 Bracket 20 133.530 1 Bracket, pipe protection 21 172.071 3 Strap, brake pipe to rear axle 22 052.241 1 Union connection - large, 7/16” 23 164.033 1 Washer lock 24 161.298 1 LOCKING NUT 25 052.242 1 Union connection - small, 3/8” 26 164.025 1 Washer lock 27 161.009 1 Locking nut 28 172.073 A/R Clip, single pipe 3/16” - 3/16” screw 172.063 A/R Clip, single pipe 3/16” - 1 /4” screw 172.042 A/R Clip, single pipe 3/16” - 5/16” screw 29 172.072 A/R Clip, dual pipe 3/16” - 3/16” screw 30 172.222 3 Clip, brake pipe to clutch hose bracket 31 172.223 2 Clip, pipe to LH front hose 32 172.224 1 Clip, pipe to RH front valance
Bending toolThe best tool for bending your brake pipe set etc.
5 meters copper/nickel brake pipe, 3/16”
Female union 3/8” UNF for 3/16” pipe
Male union 3/8” UNF for 3/16” pipe
Part nr.
052.405
Part nr.
052.406
In-line connector, male3/8” x 3/8” UNF
Part nr.
052.242
In-line connector, female 3/8” x 3/8” UNF
Part nr.
052.243
Flaring toolThis professional flaring tool is
of a very high quality and is suitable for both
3/16” and 1/4” pipes. Made
in England
Part nr.
054.401
Part nr.
200.737
Part nr.
200.813
© V a n G e s t e l B & C 2 0 0 544
Rear brakes - hand brake
45© V a n G e s t e l B & C 2 0 0 5
Rear brakes - hand brake
ILL N° PART N° QTY DESCRIPTION
1 053.087 2 Wheel cylinder assembly 2 052.084 2 Plate, wheel cylinder retaining 3 052.085 2 Spring plate retaining 4 052.251 2 Dirt excluder 5 052.247 1 RH adjuster 052.248 1 LH adjuster 6 052.252 2 Brake shoe return spring, abutment end 7 052.253 2 Brake shoe return spring, cylinder end 8 052.254 2 Plate, brake shoe support 9 052.258 1 KIT, BRAKE SHOE FIXING (INCL. 4 x 052.255/6/7) 052.255 4 Washer, cup 10 052.256 4 Spring 11 052.257 4 Pin, shoe steady 12 053.089 1 Brake shoe lining kit (4 pieces), incl. rivets 053.088 1 Brake shoe assembly set (4 pieces) 13 050.061 2 Brake drum 14 162.058 4 Screw 15 052.029 2 Plug 16 052.249 1 RH lever, operating 052.250 1 LH lever, operating 17 052.246 2 Retaining clip, dust cap 18 052.028 2 Screw, bleed 19 052.245 2 Dust cap, bleed screw 20 052.244 1 Repair kit for 2 wheel cylinders 21 052.117 1 Rubber grease 22 050.059 1 RH base plate 050.060 1 LH base plate 23 162.122 8 Bolt 24 161.078 8 Locking nuts 25 134.063 1 Handbrake cable (when disc wheels are fitted) 134.064 1 Handbrake cable (when wire wheels are fitted) 26 054.132 1 Handbrake cable adjusting kit 27 054.133 1 Lever assembly 28 054.134 1 Fastener kit, cable to battery box 29 054.135 1 Fastener, cable to 3 way connector 30 054.039 2 Clevis pin 31 054.057 1 Complete handbrake handle 32 054.053 1 KNOB 33 054.054 1 Rod
ILL N° PART N° QTY DESCRIPTION
34 054.055 1 Spring 35 054.056 1 Grip, handle 36 054.058 1 Handle 37 054.059 1 PAWL 38 163.011 1 Washer 39 054.060 2 Washer on spindle 40 054.061 1 Plate, ratchet 41 162.136 3 Screw, handbrake handle to tunnel 42 054.062 1 Lever, operation 43 163.005 1 Washer 44 161.025 1 Self locking nut 45 054.051 1 GROMMET cable protection 46 054.052 1 Cable clamp, to battery box 48 163.010 1 Washer, plain 49 164.012 1 Washer, spring 50 161.019 1 Nut 51 133 … 1 Bracket, cable to tunnel shaft 52 161.024 1 Nut 53 163.010 1 Washer, plain 54 054.038 1 Spring 55 163.011 1 Washer, plain 56 054.036 1 T runion cable 57 054.037 1 Nut, cable adjusting 58 054.040 1 Clamp, cable to 3 way 59 162.047 1 Screw 60 164.015 1 Washer, spring 61 161.024 1 Nut 62 054.029 1 Lever, inner 63 054.030 1 Lever, outer 64 054.031 1 Bush 65 054.028 1 Fulcrum, bolt 66 163.008 1 Washer, plain 67 161.021 1 Nut, self locking 68 163.009 2 Washer, plain 69 164.014 1 Washer, anti-rattle 70 161.010 1 Nut 71 162.029 1 Screw 72 164.012 1 Washer, spring 73 161.019 1 Nut
© V a n G e s t e l B & C 2 0 0 546
Brake calliper and brake disc
ILL N° PART N° QT DESCRIPTION
1 050.043 2 Brake disc 050.262 2 Brake disc, drilled 050.306 2 Brake disc, Groove type 2 053.066 1 Brake pad set (4 pieces) 053.295 1 Brake pad set ‘Green Stuff’ (4 pieces) 3 052.260 1 Securing pin & clip set 4 052.261 1 Shim set (4 pieces) 5 050.062 1 RH ‘16 P’ brake calliper 050.063 1 LH ‘16 P’ brake calliper 050.064 1 RH ‘16 PB’ brake calliper 050.065 1 LH ‘16 PB’ brake calliper
ILL N° PART N° QT DESCRIPTION
6 052.157 1 Seal kit ‘16 P’ for two callipers 052.259 1 Seal kit ‘16 PB’ for two callipers 7 053.061 4 Piston for ‘16 P’ type 053.090 4 Piston for ‘16 PB’ type 8 052.264 2 DO NOT SEPARATE THE TWO PARTS FROM YOUR BRAKE CALLIPERS! IF YOU HAVE DONE THIS, USE THESE CHANNEL SEALS 9 052.078 2 Bleed screw 10 052.245 2 Dust caps, bleed screw 11 162.464 4 Bolt, calliper attachment 12 174.027 2 Lock tab
ILL N° PART N° QT DESCRIPTION
13 162.463 10 Bolt, disc to hub 14 164.006 10 Washer, spring 15 161.026 10 Nut 16 050.066 1 RH dust cover 050.067 1 LH dust cover 17 052.262 1 RH bracket for brake hose 052.263 1 LH bracket for brake hose 18 162.462 2 Screw, dust cover 19 164.012 2 Washer, spring 20 162.033 2 Screw, dust cover 21 164.002 2 Washer, spring
47© V a n G e s t e l B & C 2 0 0 5
Steering wheel and column
IIL N° PART N° QTY DESCRIPTION
1 042.328 1 Steering wheel, original (42 dia, leather covered) 2 161.022 1 Nut, steering wheel 3 083.074 1 Steering wheel centre boss + horn push 4 162.466 3 Securing screws 5 185.026 1 MOTO-LITA, steering wheel, 35 dia Wood (see page 90 for more choice) 185.156 1 MOTO-LITA, steering wheel, 35 dia Leather (see page 90 for more choice) 6 185.082 1 MOTO-LITA, steering wheel boss + cap 7 083.075 1 Slip ring 8 083.076 1 Rotor assembly 9 043.062 1 Column top bush, nylon 10 043.058 1 Column bottom bush, felt (when steering lock is not fitted) 043.070 1 Column bottom bush, felt (when steering lock is fitted) 11 043.069 1 Clip, retaining 12 121. 197 1 Draught excluder, steering column 13 134.140 1 Inner column, when no steering lock is fitted 134. 14 1 1 LHD inner column, when a steering lock is fitted 134.142 1 RHD inner column, when a steering lock is fitted
IIL N° PART N° QTY DESCRIPTION
14 134.143 1 Outer column, when no steering lock is fitted 134.144 1 LHD outer column, when a steering lock is fitted 134.145 1 RHD outer column, when a steering lock is fitted 15 133.072 1 Bracket 16 133.073 1 Blanking plate 17 164.002 2 Spring washer 18 161.002 1 Nut 19 162.073 2 Bolt 20 043.009 2 Distance piece 21 163.001 4 Washer,plain 22 043.010 2 Clamp 23 164.002 2 Washer, spring 24 161.002 2 Nut 25 043.108 1 Steering lock assembly less ignition switch 26 083.370 1 Switch, ignition 27 043.109 1 Joint assembly, universal 28 162.081 1 Bolt, clamping 29 164.002 1 Washer, spring 30 161.002 1 Nut 31 162.008 4 Bolt 32 164.002 4 Washer, spring
IIL N° PART N° QTY DESCRIPTION
33 161.002 4 Nut 34 043.110 2 Plate for coupling 35 043.111 1 Coupling 36 043.112 1 Earth wire 37 043.026 1 UNIVERSAL JOINT 38 042.330 1 MGC, NORTH AMERICA, Steering wheel (42 dia, leather covered) 39 161.273 1 Nut, steering wheel 40 083.378 1 Steering wheel motif, centre 41 172.016 4 Clips, motif clamping 42 185.026 1 MOTO-LITA, steering wheel, 35 dia Wood (see page 90 for more choice) 185.156 1 MOTO-LITA, steering wheel, 35 dia Leather (see page 90 for more choice) 43 185.089 1 MOTO-LITA, STEERING WHEEL, hub and centre cap (North America specifications) 44 134.146 1 North America steering wheel column 45 043.094 1 Top bush, nylon 46 043.095 1 Bottom bush, nylon 47 121.198 1 Seal, draught excluder 48 043.100 1 Steering column lock and ignition switch 49 083.371 1 Switch ignition 50 162.401 1 Screw, switch retaining 51 162 … 2 Bolt, shear
© V a n G e s t e l B & C 2 0 0 548
Steering rack
ILL N° PART N° QTY DESCRIPTION
1 042.331 1 LHD steering rack assembly 042.332 1 RHD steering rack assembly 2 043.126 1 Rack seals and clip set 3 043.124 2 Boot seal 4 172.129 1 Clip, large 5 172.226 1 Clip, large, pinion side 6 172.225 2 Clip, small 7 043.043 2 Socket ball assembly 8 161.053 2 LOCK NUT 9 161.079 2 Nut, nylon locking 10 043.029 2 Boot, dust 11 043.125 2 Retainer boot, small 12 172.124 2 Retainer boot, big end 13 043.117 1 LHD, RACK & PINION 043.118 1 RHD, RACK & PINION
ILL N° PART N° QTY DESCRIPTION
14 043.119 2 LOCK NUT 15 043.120 1 Yoke, rack support 16 163 … 1 Washer 17 043.048 1 Spring 18 043.051 A/R Shim 0.0609 mm 043.052 A/R Shim 0.127 mm 043.053 A/R Shim 0.254 mm 19 043.050 1 Plate, cover 20 164.002 2 Washer, spring 21 162.086 2 Screw, UNC 22 043.113 1 LHD housing 043.114 1 RHD housing 23 162.467 1 Screw, retaining 24 043.116 1 DISC, backing 25 043.115 1 Bush, pinion
ILL N° PART N° QTY DESCRIPTION
26 043.060 1 Oil seal, pinion side 27 043.122 2 Tie rod 28 043.047 2 Ball, seating 29 043.048 2 Spring 30 043.123 2 Housing, ball 31 043.063 1 Bearing, pinion 32 043.121 1 Washer, plain 33 161 … 1 Nut, bearing retainer 34 043.066 1 Gasket, end cover 35 043.067 1 End plate 36 164.002 2 Washer, spring 37 162.085 2 Bolt
49© V a n G e s t e l B & C 2 0 0 5
Rear suspension
ILL N° PART N° QTY DESCRIPTION
1 042.060 1 RH rear shock absorber 042.062 1 LH rear shock absorber 2 042.028 2 Link, shock absorber to spring 3 042.333 2 Bolting kit, one shock absorber to chassis 4 042.521 1 SPAX rear shock absorber kit 5 042.390 2 SPAX shock absorber 6 042.168 2 MGC, Roadster, rear spring 042.169 2 MGC GT, rear spring 7 041. 150 1 Complete mounting kit, for 2 sides 8 042.334 2 Kit, axle strap & mountings
ILL N° PART N° QTY DESCRIPTION
9 041.086 2 Strap only 10 032.196 A/R Repair shaft, axle strap fixing 11 041.091 1 RH bracket, spring to link 041.092 1 LH bracket, spring to link 12 041.090 4 Plate, lockating 13 041.047 4 Pad, spring 041.515 4 Superflex polyurethane pad, spring 14 041.088 4 ‘U’ bolt, normal size 041.326 4 ‘U’ bolt, longer size (for SPAX etc.) 15 041.085 2 Pedestal 16 041.083 2 BUMP STOP RUBBER
ILL N° PART N° QTY DESCRIPTION
17 162.037 2 Bolt 18 041.089 2 Bush, supplied with spring 041.513 2 Superflex polyurethane bush 19 164.021 2 Washer, spring 20 161.032 2 Nut 21 041.043 2 SHACKLE, pins on plate 22 041.044 8 Bush 041.514 8 Superflex polyurethane bush 23 041.045 2 Shackle plate 24 164.006 4 Washer, spring 25 161.026 4 Nut 26 161.025 8 Nut
See page 89 for Superflex bushes
© V a n G e s t e l B & C 2 0 0 550
Rear axle
51© V a n G e s t e l B & C 2 0 0 5
Rear axle
ILL N° PART N° QTY DESCRIPTION
1 030.030 1 Disc wheels, 14/43 teeth (3.071: 1 ratio) 030.031 1 Disc wheels, 13/43 teeth (3.307: 1 ratio) 030.035 1 Disc wheels, 10/37 teeth (3.7: 1 ratio) 2 030.032 1 Wire wheels, 14/43 teeth (3.071: 1 ratio) 030.033 1 Wire wheels, 13/43 teeth (3.307: 1 ratio) 030.036 1 Wire wheels, 10/37 teeth (3.7: 1 ratio) 3 030.019 1 Disc wheel, case assembly 030.020 1 Wire wheel, case assembly 4 162.468 4 Bolt, bearing cap 5 161.026 2 Nut 6 162.034 1 Plug, drain 7 162.034 1 Plug, filler 8 032.068 1 Cover, axle case 9 016.064 1 Washer, joint, axle case 10 162.033 8 Bolt 11 162...... 2 Bolt, clip and cover 12 164.002 10 Washer, spring 13 133.513 1 Bracket, compensating lever 14 162.121 2 Bolt, bracket 15 164.002 2 Washer, spring 16 030.040 1 Cage, differential 17 032.197 2 Wheel differential (RA) 101 to 744 Disc wheels 032.082 2 Wheel differential 18 032.008 2 Washer, thrust, wheel 19 032.004 2 Pinion, differential (RA) 101 to 744 Disc wheels 032.198 2 Pinion, differential 20 032.007 2 Washer, thrust, pinion 21 032.199 1 Pin, pinion 22 032.083 1 Roll-pin 23 031.010 2 Bearing, differential
COLLAR, DISTANCE 24 032.072 2 .149” (3.784 mm) 032.073 2 .147” (3.734 mm) 032.074 2 .143” (3.632 mm) 032.075 2 .141” (3.581 mm) 032.076 2 .135” (3.429 mm) 032.077 2 .129” (3.277 mm) 032.078 2 .125” (3.175 mm) 032.079 2 .123” (3.124 mm) 032.080 2 .117” (2.972 mm)
ILL N° PART N° QTY DESCRIPTION
CROWN WHEEL (WITH PINION) 25 032.200 1 14/43 teeth (3.071: 1 ratio) 032.201 1 13/43 teeth (3.307: 1 ratio) 032.070 1 10/37 teeth (3.7: 1 ratio) 26 032.071 8 Bolt, crown wheel to cage WASHER, PINION THRUST 27 032.084 1 .222” (5.64 mm) 032.085 1 .220” (5.59 mm) 032.087 1 .214” (5.44 mm) 032.088 1 .212” (5.39 mm) 032.089 1 .210” (5.33 mm) 28 031.011 1 Bearing, pinion, inner 29 032.090 1 Spacer, bearing 30 031.012 1 Bearing, pinion, outer 31 031.013 1 Seal, oil 32 032.091 1 Cover, dust 33 032.202 1 Flange, universal joint 34 161.052 1 Nut 35 032.093 1 Washer, plain 36 030.021 2 Disc wheel, shaft, axle 030.022 2 Wire wheel, shaft, axle 37 032.099 2 Spacer, bearing 38 031.015 2 Bearing 39 032.089 2 Cap, hub bearing 40 031.014 2 Seal, oil 41 032.097 2 Collar, oil seal 42 032.203 2 Disc wheel, flange, driving 43 167.036 8 Disc wheel, stud, wheel 44 161.046 8 Disc wheel, nut, wheel stud 45 032.104 1 Wire wheel, flange, driving, RH 032.458 1 Conversion hub, RH 46 032.10S 1 Wire wheel, flange, driving, LH 032.459 1 Conversion hub, LH 47 167.033 10 Wire wheel, stud 48 161.065 10 Wire wheel, nut, drum to flange 49 032.096 2 Collar, drive shaft 50 032.095 2 Nut, drive shaft 51 300.113 2 Oil for rear axle 1 L. 52 032.196 A/R Repair shaft
AXLE ASSEMBLY, LESS BRAKE INSTALLATIONS
Wire wheel conversionwith bolt-on hub (rear)
1 RH rear hub
1 LH rear hub
Part nr.
032.458
Part nr.
032.459
© V a n G e s t e l B & C 2 0 0 552
Wheels
53© V a n G e s t e l B & C 2 0 0 5
Wheels
ILL N° PART N° QTY DESCRIPTION
1 046.023 5 Wire wheel, chrome plated, 72 spokes, 5 1/2 x 15” 046.022 5 Wire wheel, painted silver, 72 spokes, 5 1/2 x 15” 046.021 5 Wire wheel, chrome plated, 72 spokes, 5 x 15” 046.020 5 Wire wheel, painted silver, 72 spokes, 5 x 15” 2 169.029 A/R Spoke and nipple, short, bare metal 169.030 A/R Spoke and nipple, long, bare metal 169.031 A/R Spoke and nipple, short, chrome plated 169.032 A/R Spoke and nipple, long, bare metal 3 046.024 5 Centre locking, alloy wheel 4 042.075 2 RH, 2 eared, MG creasted 042.076 2 LH, 2 eared, MG creasted 5 042.071 2 RH, 2 eared 042.072 2 LH, 2 eared 6 042.079 2 RH, continental style 042.080 2 LH, continental style 7 186.034 1 1/2 KGR. COPPER GREASE, for hubs and spinners 8 187.012 1 Silicone spray, to protect your chrome wire wheels 9 185.050 1 Wire wheel cleaning brush 10 046.045 5 Wheel, disc type 11 161.046 20 Nut for disc wheel
ILL N° PART N° QTY DESCRIPTION
12 141.352 4 Chrome hub cap 13 046.046 5 Wheel, rostyle 14 161.296 20 Wheel nut, chrome plated 15 141.040 4 Hub cap, rostyle 16 141.041 A/R Badge “MG” for hub cap 17 187.013 A/R Spray, primer on metal 187.004 A/R Spray, Silver paint 187.002 A/R Spray, black paint 18 133.143 1 Wheel clamp, wire wheel only 19 133.596 1 Wheel clamp, disc wheel only 20 133.59 7 1 Wheel clamp, rostyle wheel only 21 132.102 1 JACK assembly 22 153.056 1 Toolbag 23 133.140 1 Lever, hub cap remover 24 200.662 1 Spanner box, sparking plug 25 200.655 1 Tommy bar, box spanner 26 133.141 1 Spanner, octagonal style 27 133.142 1 Spanner, wheel nut 161.046 200.663 1 Spanner, wheel nut 161.296 28 042.097 1 Hammer, copper-hide
‘D’ Type style wheel15” x 6” alloy wheel
Part nr.
046.163
15” x 6” Alloy wheel
Part nr.
046.062
Centre lock alloy wheel15” x 6”
Part nr.
046.024
© V a n G e s t e l B & C 2 0 0 554
Electrics
55© V a n G e s t e l B & C 2 0 0 5
Electrics
ILL N° PART N° QTY DESCRIPTION
1 081.1 72 1 Distributor assembly, 25D6 E.C.M. CURVE 888, RANGE 13° -15° SUCTION 2-6-3 2 081.163 1 Cap 3 081.161 1 ROTOR ARM 4 081.017 1 Condensor 5 081.016 1 Contact set 6 081.052 1 Earth lead 9 081.049 1 Terminal bush & lead 11 081.336 1 Spring set, assortment of 5 pieces 12 081.763 1 Screw and washer kit 14 081.176 1 Vacuum unit 15 081.061 1 ‘0’ ring 16 081.021 1 Clamp 17 162.132 1 Bolt 18 LUMENITION OPTRONIC IGNITION originally Negative Earth, ask info for positive earth! This is an electronic ignition conversion principally for cars originally fitted with mechanical distributors using contact breaker points and condensor. The advantage is that it contains no wearing parts, requires no adjustment or maintenance and once ignition timing is set it will remain permanently in tune. 086.081 1 Rotor for 22D, 23D, 25D, 31D 086.082 1 Power module, OPTRONIC, photo transistor LUMENITION MAGNETRONIC IGNITION 086.579 1 only Negative Earth, see top of this page!
19 082.003 2 6 VOLT BATTERY DRY CHARGED 082.159 2 6 VOLT BATTERY in black rubber casing, DRY CHARGED 21 133.555 2 Complete battery fixing kit (for one battery) 22 081.036 4 Battery bolt 23 081.038 4 Pad, under battery 24 081.039 2 Pad, under battery clamp 25 081.040 2 Battery clamp 26 161.061 4 Self locking nuts 27 133.556 2 6 Volt battery top plate, an alternative for 081.040 28 081.177 1 Vacuum pipe, metal 081.091 1 1 meter vacuum pipe, black plastic 29 081.064 1 Connector, straight 30 081.092 1 Connector, 90° 31 172.248 2 Clip, vacuum pipe 32 133.557 1 Bracket, vacuum pipe
ILL N° PART N° QTY DESCRIPTION
33 082.029 1 Starter motor assembly 082.149 1 Modern replacement starter motor 34 081.157 1 Solonoid 35 081.159 1 Drive end 36 081.178 1 Bush, drive end side 37 081.179 1 Bush, rear side 38 081.074 1 BRUSH set 39 081.158 1 Spring set 40 082.030 1 Original alternator to be used with “4TR” control box (16AC TYPE, plastic half section) 082.010 1 Alternative alternator (ACR TYPE) These alternators should be used together with our 081.180 socket conversion kit. 41 081.180 1 Socket conversion kit, will fit all 16ACR TYPE AL TERNA TORS 42 084.152 1 Control box “4TR”, for 16AC alternator only! 43 083.117 1 Fuse box 44 083.118 1 Cover 45 084.005 1 Fuse set, 35 AMP 46 081.181 1 Pulley fixing kit: key, nut, spring, washer 47 081.182 1 Fan, alternator (all types) 48 081.184 1 Pulley, alternator (all types) 49 081.185 1 BRUSH SET, 16AC TYPE 1 BRUSH SET, 16ACR TYPE 50 081.187 1 Bearing, drive end 081.188 1 Bearing, slip end 51 133.558 1 Adjusting link 52 163.008 1 Washer, plain 53 164.002 1 Washer, spring 54 081.026 1 Screw, UNC 55 133.559 1 Pillar, adjusting link 56 133.560 1 Ring, tolerance, pillar 57 163.008 1 Washer, plain 58 164.002 1 Washer, spring 59 161.002 1 Nut 60 162.129 1 Bolt, long 61 163.008 1 Washer, plain 62 162.081 1 Bolt, rear 63 041.087 1 Spacer, cut to length! 64 163.001 1 Washer, plain 65 161.012 1 Nylon insert locking nut
Magnetronic ignition systemTo replace contact breakers and condensersLumenition is proud to present the NEW Magnetronic Ignition System. Designed to replace troublesome points with a simple drop in installation. Each unit comes complete, ready to fit straight into your existing distributor. You will notice that your car will start immediatly, have better fuel consumption, and increased performance. The Magnetronic Ignition System is suitable for most Lucas distributers, NEGATIVE EARTH and with or without vacuum advance.
System with mechanical distributor and contact points.
Lumenition, no wearing parts & allways perfect timing.
Quality ignition products for your classic
Power supply module
Fitting kit for distributor
Originaly for Neg. earthed cars, askfor wiring info when Pos. earthed
Module bracket for classics• Professional installation• No new holes required• Uses coil mounting boltsFor use with Optronic and Performance module
Optronic ignition systemLumenition Optronic Ignition is an electric ignition conversion kit principally for cars originally fitted with mechanical distributors using contact points. The advantage of the Lumenition system is that it contains no wearing parts, requires no adjustment or maintenance during service and once ignition timing is set it will remain permanently tuned. The engine will start better, last longer and run more economically through improved efficiency. There are only three components, very compact and simple to fit.
Ask your local Anglo-Parts
shop for more information
The benefits of the Magnetronic are: it is quick & easy to fit, completely self contained within the distributor and is a two wire connection. The unit is housed in a solid die-cast dissipating body which is unaffected by distributor wear and gives all the advantages associated with our Ignition Systems. NEGATIVE EARTH ONLY!
Also available: alternative: Lightweight and very powerful startermotor, see page 87
Part nr.
086.081
Part nr.
086.579
Part nr.
086.082
© V a n G e s t e l B & C 2 0 0 556
Dashboard components - European
57© V a n G e s t e l B & C 2 0 0 5
Dashboard components - European
IIL N° PART N° QTY DESCRIPTION
1 083.066 2 Shield, flasher warning 2 083.067 2 Window, flasher warning 3 083.068 2 Tube, lamp 4 083.069 1 Bracket 5 083.070 1 Cowling indicator switch LHD 6 162.137 4 Screw 7 083.072 1 Direction indicator 083.073 1 Repair kit, spring with bush 8 083.074 1 Horn push assembly 10 083.075 1 Slip-ring 11 083.076 1 Rotor assembly 12 083.394 2 Switch, courtesy light 13 162.494 4 Tap screw 14 083.438 1 GT, heated backlight switch 16 083.079 1 Unit flasher 17 163.013 1 Washer, plain 18 162.138 1 Screw 19 083.080 1 Headlamp dimmer 20 162.139 2 Screw 21 162.140 2 Screw 22 164.015 2 Washer, spring 23 083.081 1 Bracket 24 162.141 2 Screw 25 163.013 2 Washer, plain 26 164.015 2 Washer, spring 27 161.047 2 Nut 28 083.082 1 Switch, overdrive control 29 085.015 1 Badge, normal-overdrive 30 083.038 1 Switch, panel light 31 083.035 1 Barrel & key 32 083.083 1 Switch, ignition (less barrel & key) 33 083.084 1 Switch, lighting 34 083.085 1 Switch lighting, pull type 35 083.086 1 Sigar lighter ass. 36 083.087 1 Switch, wiper 37 083.088 1 Switch, heater 38 083.089 1 Switch, gear illumination, automatic 39 083.034 1 Switch, map lamp 42 083.421 1 Voltage stabilizer 43 083.440 1 Gauge, fuel, BF 2226/00 44 083.432 1 Gauge temp. + oil press. GD 1301/19, Fahrenheit 083.094 1 Gauge temp. + oil press. GD 1301/20, Centigrade 083.147 1 Gauge temp.+ oil press. GD 1301/21, cold, normal, hot
IIL N° PART N° QTY DESCRIPTION
45 083.096 2 Strap fixing 46 172.020 1 Clip 47 134.030 1 Pipe, oil pressure 48 083.097 1 Grommet 49 083.001 1 Connector, pipe 50 162.065 1 Screw 51 164.012 1 Washer, spring 52 163.035 1 Spacer, screw 53 083.098 1 Pipe, flexible 54 172.062 1 Clip 55 162.060 1 Screw 56 164.015 1 Washer, spring 57 172.063 1 Clip 58 172.064 1 Bracket, retaining-pipe 59 083.441 1 Speedometer KPH, SN6144/11 083.442 1 Speedometer KPH, SN6144/12 Germany 083.443 1 Speedometer KPH, SN6144/32 Overdrive 083.444 1 Speedometer MPH, SN6144/1 0 083.445 1 Speedometer MPH, SN6144/31 Overdrive 60 083.439 1 Rubber ring & seal kit, to serve all gauges. For each gauge are 3 seals, to mount glass and bezel to gauge body and body to fascia panel 61 083.434 2 2” chrome ring 62 172.066 1 Clamp, fixing 63 164.015 4 Washer, spring 64 161.057 4 Nut 65 083.446 1 Tacho,RV12619/00 083.447 1 Tacho, RV1 2630/00 66 172.065 2 Clamp, fixing 67 083.454 2 Glass, small, 2” 68 083.455 2 Glass, large, 4” 69 083.456 2 4” chrome ring 71 134.026 1 Speedometer cable LHD, STD 127 cm 083.007 1 Speedometer cable LHD, OlD 168 cm 083.448 1 Speedometer cable LHD, AUTOMATIC 142 cm 72 122.004 1 Grommet 73 162.049 2 Screw 74 164.015 2 Washer, spring 75 161.024 2 Nut 76 083.020 1 Cover, lens 77 083.019 1 Lens 78 084.071 1 Lamp seating
These dashboards are made from a thin layer of walnut verneer on a sturdy
backplate with multiple layers of gloss varnish. They are made to stick on the existing dashboard without having to screw or make holes. Applying these
dashboards is easy and the finish magnificent.
Part nr.
150.895
© V a n G e s t e l B & C 2 0 0 558
Dashboard components - USA
59© V a n G e s t e l B & C 2 0 0 5
Dashboard components - USA
ILL N° PART N° QTY DESCRIPTION
1 150.225 1 DASH PAD ASSEMBLY 2 150.224 1 DASH REPAIR PIECE (top part only) 3 133.270 1 CONZOLL PANEL 4 083.063 1 SET, BLANKING - RAPID HOLE 5 083.016 1 BEZEL - CHROME 6 083.017 1 PLATE, BLANKING 7 083.018 1 Badge, -=MG=- 8 172.021 2 CLIP 9 172.022 2 PLATE, CLAMPING 10 083.342 1 Brake check light 11 084.127 1 Bulb 12 083.349 1 Clip, spring 13 083.350 2 Clip, spring 14 083.345 5 Bezel & switch guide 15 083.339 1 Switch, lighting {original type} 16 083.340 1 Switch & bezet lighting {alternative} 083.341 1 Switch & bezel, lighting illuminated {alternative} 17 083.329 1 Switch,heater (original type) 18 083.331 1 Switch & bezel, heater (alternative) 19 083.477 1 Body, warning light, ignition, red 083.478 1 Body, warning light, high-beam, blue 184.135 2 Bulb holder 084.126 2 Bulb 20 083.479 1 Warning light assembly, alternative, red 083.480 1 Warning light assembly, alternative, amber 083.481 1 Warning light assembly, alternative, green 083.482 1 Warning light assembly, alternative, blue 21 083.483 2 Window, direction indicator 083.040 2 Window, plain green {alternative} 22 083.130 2 Shade, aluminium piece between bulb holder and window 23 083.115 4 Bulb holder 24 084.123 4 Bulb 25 083.484 2 Shade 26 083.485 1 Window, GT, heated backlight (OPAL LENS) 083.360 1 Window, hazard warning (RED LENS) 27 083.361 1 Bracket 28 083.486 1 Hazard unit, 3 pole 29 083.336 1 Switch, hazard warning 30 083.395 1 Switch, map light 083.487 1 Switch, GT, heated backlight 31 083.394 2 Switch, courtesy light 32 162.467 4 Tap screw 33 083.488 1 Switch, panel light 34 162.506 2 Screw, N° 6 UNC x 1/4” 35 083.344 1 Switch, ignition 36 162 … 2 Screw, switch
ILL N° PART N° QTY DESCRIPTION
37 083.355 1 Spindle, extension 38 083.356 1 Housing, ignition switch 39 083.035 1 Barrel and key 40 083.489 1 Pair steering cowls 41 162.046 2 Screw, cowl 42 162 … 2 Screw, cowl 43 083.318 1 Switch, direction indicator, horn and headlamp dipper 44 083.490 1 Striker, switch 45 083.322 1 Switch, windscreen wiper, washer and overdrive 46 083.086 1 Lighter assembly, cigar 47 133.581 1 Control assembly, heat 133.582 1 Control asembly, air 48 172.058 2 Clip, for knob locking 49 172.059 2 Pin, for knob locking 50 063.076 1 KNOB, heat control 063.077 1 KNOB, air control 57 161.320 1 Nut, tube distance 58 163.012 4 Washer, plain 59 163.034 2 Washer, plain 60 164.023 2 Washer, spring 61 161.054 2 Nut 62 083.468 1 Oil pressure gauge, BP 1200/02 63 141.356 1 Chrome bezel, oil gauge 64 083.504 1 Gauge, temperature (electrical), BT 2218/00 65 083.096 2 Clamp, gauge fixing 66 164.015 6 Washer, spring 67 161.057 6 Nut 68 083.101 2 ‘0’ ring 69 083.421 1 Voltage stabilizer 70 083.505 1 Fu~gaug~BF2223/00 71 083.507 1 Tachometer {RV1 1612/00} 083.506 1 Tachometer (RV1 1613/00) 72 172.065 2 Clamp 73 083.508 2 Ring, rubber 74 083.501 1 Speedometer, MPH {SN 5226/00} 083.502 1 Speedometer, MPH {SN 5226/02} 083.503 1 Speedometer, MPH {SN 5227/02} 75 083.509 1 Control, remote 76 172.066 1 Clamp 77 023.154 1 Box, angle drive 78 083.510 1 Speedo cable, STD, 138 cm 083.511 1 Speedo cable, OlD, 212 cm 083.512 1 Speedo cable, Auto., 153 cm 79 172.194 2 Rivet 80 163.005 2 Washer 81 012.140 1 Temperature transmitter
Dash pad assembly
Part nr.
150.225
© V a n G e s t e l B & C 2 0 0 560
Wiper motor - Wiring harness
61© V a n G e s t e l B & C 2 0 0 5
Wiper motor - Wiring harness
ILL N° PART N° QTY DESCRIPTION
1 083.530 2/3 Wheelbox fitting kit, 2 required for European Roadsters, 3 required for u.s. spec. 083.533 2 Wheelbox fitting kit, GT only 2 087.001 2/3 Wiper blade, MGC 087.002 2 Wiper blade, MGC GT 3 087.003 2/3 Wiper arm, MGC 087.004 2 Wiper arm, MGC GT 4 083.104 2 Wheelbox, MGC Metal dash 083.105 2/3 Wheelbox, Padded dash & all GT’S 5 083.111 2/3 Distance piece, MGC 083.112 2 Distance piece, MGC GT 6 083.109 2/3 Seal, MGC 083.110 2 Seal, MGC GT 7 083.107 2/3 Chrome cone, MGC 083.108 2 Chrome cone, MGC GT 8 083.106 2/3 Octagonal chrome nut 9 082.006 1 Wiper motor (excluded gear) 10 083.523 1 Brush set 11 083.524 1 Armature 12 083.525 1 Switch, parking 13 083.526 1 Gear, 105°, MGC 083.527 1 Gear, 115°, MGC GT early 083.528 1 Gear, 125°, MGC GT late 14 133.138 1 Pad, wiper motor 15 133.139 1 Distance block 16 162.018 2 Screw 17 164.012 2 Spring washer 18 163.011 2 plain washer 19 133.137 1 Strap 20 133.132 1 Casing, motor to wheel box, MGC 133.133 1 Casing, motor to wheel box, MGC GT 133.584 1 Casing, motor to wheel box, cut to required length 21 133.134 1 Casing, wheelbox to wheel box, MGC 133.585 1 Casing, LH wheel box to central wheel box, MGC USA 133.586 1 Casing, RH wheel box to central wheelbox, MGC USA 133.135 1 Casing, wheelbox to wheelbox, MGC GT 22 133.136 1 Casing, wheelbox end 23 083.024 1 Rack, cut to length 24 080.032 1 Main wiring harness, 1968-’69 GCN 1.1 01 > 4265 with seperate alternator control box 080.033 1 Main wiring harness, 1969 GCN 1.4266 - on without seperate alternator control box 080.094 1 Main wiring harness, 1968-’69 GCN1.101 > 4265, N. America with seperate alternator control box 080.087 1 Main wiring harness, 1969 GCN 1.4266 - on, N. America without seperate alternator control box 080.228 1 Tail harness for roadster 080.229 1 Tail harness for GT
ILL N° PART N° QTY DESCRIPTION
25 080.095 1 Harness, dipper switch 080.096 1 Harness, reverse switch 080.097 1 Harness, automatic option 080.098 1 Harness, overdrive option 080.100 1 Harness, wiper motor, MGC GT 26 080.009 1 Cable, earth 27 080.014 1 Cable, battery (negative) to earth 28 080.013 1 Cable, battery to battery 29 080.099 1 Cable, battery (positive) to solonoid 30 083.534 1 Connector plug, tachometer 31 083.535 2 Connector plug, 3 way 32 083.536 2 Connector plug, 3 way (reverse lamp) 33 083.537 1 Connector plug, control box, “4TR” 34 083.538 A/R Connector plug, 17,5 AMP 35 083.539 1 Connector plug kit for “ACR” alternators 36 083.540 1 Connector plug,”ACR” EUROPEAN ALTERNATORS 37 083.541 A/R Connector pin, will fit into moulded multi way plugs 38 083.542 A/R Connector socket, will fit into moulded multi way plugs 39 083.180 A/R Cable terminal. For more terminals, please use your “Tool Catalogue” 40 083.041 A/R Cable connector, single 41 083.042 A/R Cable connector, double 42 083.043 A/R Cable connector, triple 43 083.169 A/R Fuse holder 44 084.005 A/R Set of 3 fuses, 35 AMP 45 083.124 1 Horn, high note 083.125 1 Horn, low note 46 083.126 1 Horn bracket 47 122.002 A/R Grommet, 1 “-3/16” 122.005 2 Grommet, rear valance 5/8”-3/16” 122.006 1 Grommet, boot floor inwards 122.001 1 Grommet, main harness. For more grommets, please use your “Tool Catalogue” 48 172.252 A/R Clip harness to wheel arch 49 083.079 1 Flasher unit, 3 pole 083.172 1 Flasher unit, 2 pole 50 083.543 1 Control, warning light 51 190.058 1 “TOOL CATALOGUE”
Wiper motorexcluding gear
Part nr.
082.006
© V a n G e s t e l B & C 2 0 0 562
Lights and lamps
63© V a n G e s t e l B & C 2 0 0 5
Lights and lamps
ILL N° PART N° QTY DISCRIPTION
1 084.081 2 Seal, headlamp bowl to body 2 133.050 2 Headlamp bowl 3 084.051 2 Kit, lamp adjusting screws & spring 4 172.043 2 Clip, headlamp rim retaining 5 162.507 1 Screw kit, head lamp bowl to body 6 084.052 2 Wire & lamp adaptor 7 083.115 2 Bulb holder, when pilot lamp is fitted in headlamp 8 084.123 2 Bulb, for pilot lamp 9 084.054 2 Bulb, clear 084.019 2 Bulb, yellow 10 084.110 2 Bulb, H4, clear 084.111 2 Bulb, H4, yellow 11 172.044 2 Clip, bulb retaining 12 084.082 2 Lamp unit, European homologated, LHD 084.105 2 Lamp unit + hole for pilot lamp, European homologated, LHD 13 084.103 2 H4 lamp unit, European homologated, LHD 084.107 2 H4 lamp unit + hole for pilot lamp, European homologated, LHD 14 084.053 2 Inner bowl 15 084.087 2 Inner chrome ring 16 166.065 6 Screw 17 084.055 2 Chrome head lamp rim 18 084.064 2 Side & flasher lamp assembly (white & amber) 19 084.068 4 Gasket 20 084.062 2 Bulb 21 084.069 2 Bulb 22 084.066 2 Lens, white 084.377 2 Lens, amber (US) 23 084.065 2 Lens, amber 084.378 2 Lens, white (Italy) 24 084.067 2 Rim 25 162.161 4 Screw 26 084.379 2 Reflector, amber, front (US) 084.380 2 Reflector, red, rear (US) 27 162.312 8 Sc rew 28 161.024 8 Nut
ILL N° PART N° QTY DISCRIPTION
29 084.191 2 Fog lamp assembly (illustrated) (not E11 homologated) 084.193 2 Spot lamp assembly (not E11 homologated) 30 084.194 2 Light unit for fog lamp (illustrated) 084.196 2 Light unit for spot lamp 31 084.198 2 Bulb, fog lamp 084.119 2 Bulb, spot lamp 32 084.056 2 Rear lamp assembly, amber & red 33 084.057 2 Gasket, lamp to body 34 084.058 2 Gasket, lens to lamp 35 084.059 2 Rim, lens retaining 36 084.060 2 Lens, stop & tail, red (with reflector) 37 084.061 2 Lens, amber, flasher 084.270 2 Lens, red, flasher (US) 38 084.062 2 Bulb, flasher 39 084.063 2 Bulb, stop and tail 40 084.075 2 Reverse lamp assembly 41 084.076 2 Lens, gasket & screws 42 162.404 4 Screw 43 084.125 2 Bulb 44 084.251 4 Gasket 45 084;070 2 Number plate lamp 46 084.071 2 Seal, lens seating 47 141.021 1 PAIR LAMP PLINTHS 48 084.074 2 Bulb 49 083.019 2 Lens 50 083.020 2 Cover 51 162.110 2 Screw, short 162.111 2 Screw, longer 52 161.047 4 Nut, self locking 53 084.095 2 Bulb holder assembly 54 084.077 1 GT, roof lamp 55 084.078 1 Lens 56 084.079 1 Bulb 57 162.112 2 Screw 58 162.403 2 Screw, rim retaining
5” fog lampPart nr.
084.191
Part nr.
084.603
Part nr.
084.604
Part nr.
084.196Part nr.
084.194
Part nr.
084.193
Part nr.
284.090
5” spot lamp
Spare fog lamp glass Spare spot lamp glass
5” fog lamprear fixing
5” spot lamprear fixing
5” halogen spot lamp with round backComes with halogen bulb for modern lighting. Sold in pairs
Part nr.
185.337 5” lamp protection cover
© V a n G e s t e l B & C 2 0 0 564
Body panels
ILL N° PART N° QTY DESCRIPTION
1 133.049 2 Complete bolting kit to fit one front wing 2 131.060 1 Rear valance 3 131.061 1 Rear valance, lower part only 4 152.011 1 Fastener set, mouldings (6 plates on stud) 5 152.012 1 Fastener set, mouldings (50 clips on rivet) 6 134.031 1 6 piece moulding set 134.001 1 RH front wing moulding 7 134.002 1 LH front wing moulding 8 134.003 1 RH door moulding 9 134.004 1 LH door moulding 10 134.005 1 RH rear wing moulding 11 134.006 1 LH rear wing moulding 12 138.060 1 RH front wing, roadster, good reproduction 138.061 1 LH front wing, roadster, good reproduction 138.062 1 RH front wing, GT, good reproduction 138.063 1 LH front wing, GT, good reproduction
ILL N° PART N° QTY DESCRIPTION
131.066 1 RH front wing, roadster, original 131.067 1 LH front wing, roadster, original 131.068 1 RH front wing, GT, original 131.069 1 LH front wing, GT, original 13 131.075 1 RH door, roadster 131.076 1 LH door, roadster 131.079 1 RH door, GT 131.080 1 LH door, GT 14 131.081 1 RH rear wing, roadster 131.082 1 LH rear wing, roadster 15 131.083 1 RH rear wing, GT 131.084 1 LH rear wing, GT 16 131.070 1 Front valance 17 133.052 1 Fastener kit, front valance 18 131.326 1 Top panel, European 131.327 1 Top panel, US 20 132.408 1 Rear decking panel 22 132.080 1 RH splash plate 132.081 1 LH splash plate
ILL N° PART N° QTY DESCRIPTION
23 133.043 1 RH mini splash plate 133.044 1 LH mini splash plate 24 121.014 1 RH seal, top 121.015 1 LH seal, top 25 121.127 1 RH seal, splash plate 121. 128 1 LH seal, splash plate 26 152.080 1 Rivet set (50 pieces) 27 133.054 2 Bolting kit, splash plate 28 132.086 1 RH front wing repair panel 132.087 1 LH front wing repair panel 29 132.088 1 RH door skin 132.089 1 LH door skin 30 132.092 1 RH door bottom repair piece 132.093 1 LH door bottom repair piece 31 131.085 1 RH rear wing repair panel 131.086 1 LH rear wing repair panel 32 132.090 1 RH rear wing lower part 132.091 1 LH rear wing lower part 33 132.084 1 RH ‘B’ post panel 132.085 1 LH ‘B’ post panel
65© V a n G e s t e l B & C 2 0 0 5
Inner body panels
ILL N° PART N° QTY DESCRIPTION
1 131.050 1 RH inner side member 131.051 1 RH inner side member repair piece, 123 cm 131.052 1 LH inner side member 131.053 1 LH inner side member repair piece, 123 cm 2 131.054 1 RH under castle 131.055 1 LH under castle 3 131.056 1 RH inner sill 131.057 1 LH inner sill 4 131.058 1 RH outer sill 131.059 1 LH outer sill 5 133.045 1 RH sill end plate 133.046 1 LH sill end plate 6 133.047 2 Reinforcement, above jacking point 7 133.601 2 JACKING POINT 8 132.411 1 RH reinforcement, inner wing 132.412 1 LH reinforcement, inner wing 9 132.071 1 RH side panel, Roadster 132.072 1 LH side panel, Roadster 132.073 1 RH side panel, GT 132.074 1 LH side panel, GT
ILL N° PART N° QTY DESCRIPTION
10 132.075 1 RH ‘A’ post, Roadster 132.076 1 LH ‘A’ post, Roadster 132.077 1 RH ‘A’ post, GT 132.078 1 LH ‘A’ post, GT 11 131.395 1 RH inner front wheel arch, European 131.396 1 RH inner front wheel arch, US 131.397 1 LH inner front wheel arch 12 131.398 1 RH side member 131.399 1 LH side member 13 131.400 1 RH side member upper plate 131.401 1 LH side member upper plate 14 132.402 1 RH chassis box section 132.403 1 LH chassis box section 15 131.404 1 Cross member, front suspension 16 132.413 1 Platform, bonnet locking 17 133.602 1 Support, platform 18 132.414 1 Radiator duct panel 19 132.415 1 Cross profile, radiator duct 20 132.416 1 RH radiator support panel 132.417 1 LH radiator support panel 21 131.405 1 Crossmember
ILL N° PART N° QTY DESCRIPTION
22 131.406 1 RH floor assembly 131.407 1 LH floor assembly 23 131.408 1 RH floor, front section 131.409 1 LH floor, front section 24 132.344 1 RH heel board 132.345 1 LH heel board 25 133.041 1 RH bracket, spring mounting 133.042 1 LH bracket, spring mounting 26 131.043 1 RH side, rear member 131.044 1 LH side, rear member 27 132.055 1 RH springhanger, repair section 132.056 1 LH spring hanger, repair section 28 132.062 1 RH outer wheel arch 132.063 1 LH outer wheel arch 29 132.060 1 RH inner wheel arch part 132.061 1 LH inner wheel arch part 30 132.053 1 RH boot floor side panel 132.054 1 LH boot floor side panel 31 131.040 1 Boot floor panel 32 132.343 2 Battery box 33 132.052 1 Panel, battery cover 34 121.012 1 Seal 35 152.010 5 Fastener
© V a n G e s t e l B & C 2 0 0 566
Boot and bonnet
67© V a n G e s t e l B & C 2 0 0 5
Boot and bonnet
ILL N° PART N° QTY DESCRIPTION
1 141.022 1 Air intake 2 172.033 6 Clip 3 133.056 1 Bracket rubber 4 122.011 1 Rubber 5 133.603 1 Bonnet buffer kit 6 121.072 1 Bonnet seal 7 150.019 1 Rod 8 171.008 1 Spring 9 163.001 1 Washer, plain 10 121.028 1 Seal, rear 11 150.365 1 Insulation pad bonnet 12 131.410 1 Bonnet aluminium 131.412 1 Bonnet fiber glass 13 134.150 1 Cable bonnet pull 14 172.042 3 Clip 15 161.002 2 Nut 16 172.056 1 Fastener cable 162.135 1 Screw fastener 17 121.216 1 Seal, bonnet front 18 133.081 4 Buffer 19 162.047 8 Screw 20 164.015 8 Washer, spring 21 161.024 8 Nut 22 161.026 1 Nut adjuster 23 171.009 1 Spring 24 133.057 1 Plate 25 133.058 1 Pin 26 133.059 1 Cup lock lockation 27 162.029 3 Screw 28 164.012 3 Washer, spring 29 171.010 1 Spring 30 133.060 1 plate catch 31 133.061 1 Safety catch 32 161.042 3 Nut 33 162.060 3 Screw 34 133.062 1 Bracket 35 162.060 2 Screw 36 164.015 2 Washer, spring 37 163.013 2 Washer, plain 38 133.063 2 Hinge bonnet 39 161.019 4 Nut 40 164.012 4 Washer, spring 41 163.011 4 Washer, plain 42 162.077 4 Screw 43 162.029 4 Screw 44 164.012 6 Washer, spring 45 163.011 6 Washer, plain 46 161.019 2 Nut 47 141.054 1 Lock set, boot & doors (3 pieces) 48 133.069 1 Gasket set, boot lock & door handles 49 141.364 1 Badge MG 50 172.031 15 Clip 51 141.001 1 Badge (set of 3 pieces) 52 150.020 1 Rod
ILL N° PART N° QTY DESCRIPTION
53 171.008 1 Spring 54 163.001 1 Washer 55 172.030 1 Clip 56 162.061 2 Screw 57 133.065 1 Stricker 58 163.011 2 Washer, plain 59 164.012 2 Washer, spring 60 162.077 2 Screw 61 162.060 2 Screw 62 164.015 2 Washer, spring 63 163.013 2 Washer, plain 64 133.066 1 Latch lock 65 163.013 2 Washer, plain 66 164.015 2 Washer, spring 67 162.060 2 Screw 68 131.090 1 Boot lid steel 69 121.032 1 Sealing boot lid 70 133.067 1 RH hinge 133.068 1 LH hinge 71 162.029 12 Screw 72 164.012 12 Washer, spring 73 132.418 1 plate, seal retainer 74 121.217 1 Seal above radiator 75 141.365 1 Bonnet moulding 76 133.604 1 Fastener kit, bonnet moulding 172.167 6 One plate on stud only 77 131.103 1 GT tailgate 78 133.605 1 RH tail hinge 133.606 1 LH tail hinge 79 162.143 4 Screw 80 133.607 A/R PACKING hinge 81 161.002 6 NUT 82 164.002 6 Washer, spring 83 163.001 6 Washer, plain 84 141.056 1 RH stay assembly 141.057 1 LH stay assembly 85 141.058 2 Cover 86 152.043 2 Cap & starlock, large 87 152.042 2 Cap & starlock, small 88 161.326 4 Dome nut, chrome 89 164.007 4 Washer, shakeproof 90 163.011 4 Washer, plain 91 164.041 4 Washer, anti rattle 92 167.104 2 Stud, pivot stay 93 163.008 2 Washer, plain 94 164.002 2 Washer, spring 95 161.012 2 Nut, locking 96 133.608 1 Catch cover, GT only 97 141.366 1 Letterset “MGC GT” 98 152.112 1 23 pieces blind fixing studs 99 152.045 A/R Blind fix 100 121.055 1 Seal (foam), outer 101 134.032 1 Seal retainer 102 162.467 10 Screw 103 121.032 1 Seal, inner
Part nr.
133.868
Part nr.
172.233
Part nr.
141.022 Air intake grill
Stainless steel mesh
Blind fix, 6 required
© V a n G e s t e l B & C 2 0 0 568
Door fittings, part 1
69© V a n G e s t e l B & C 2 0 0 5
Door fittings, part 1
ILL N° PART N° QT DESCRIPTION
1 121.023 1 RH drop glass seal 121.024 1 LH drop glass seal 2 121.025 1 RH seal, frame to door 121.026 1 LH seal, frame to door 3 150.029 2 Inner draught excluder strip 4 122.012 2 Corner block 5 121.060 4 Channel seal 6 121.057 1 RH 1/4 light seal, Roadster 121.058 1 LH 1/4 light seal, Roadster 121.070 1 RH 1/4 light seal, GT 121.071 1 LH 1/4 light seal, GT 7 122.032 4 DOOR PLUG, plastic 8 121.218 2 Seal under 1/4 light, GT ONLY 9 152.039 14 Rivet 10 172.164 14 Fasteners, GT only 11 134.017 1 RH door finisher, GT 134.018 1 LH door finisher, GT 12 133.069 1 Gasket set 13 141.045 1 Door seal finisher set, Roadster 14 141.367 1 Pair door finishers, GT 141.368 1 RH finisher 141.369 1 LH finisher 15 162.308 A/R Screw 16 152.039 A/R Rivet 17 150.038 1 2 door seals, black velour + rubber 150.039 1 2 door seals, red velour + rubber 150.040 1 2 door seals, black PVC + rubber 150.023 2 1 door seal, GT, black velour + rubber 150.022 2 1 door seal, GT, red velour + rubber 150.024 2 1 door seal, GT, black PVC + rubber 18 141.054 1 Set of 3 locks 141.053 1 Pair door locks 141.347 1 AN IMPROVED PAIR DOOR LOCKS, with threaded body and steel securing nut instead of spring- clip fastening 19 122.182 2 Rubber ring behind door locks (included in 141.054) 20 172.206 2 Lock clip (included in 141.054) 21 141.097 2 Door handle 22 133.097 2 RH door hinge 133.098 2 LH door hinge
ILL N° PART N° QT DESCRIPTION
23 133.609 4 OVERSIZE HING PIN 24 133.099 8 Tapping plate 25 162.083 12 Screw, hinge to door 26 162.143 16 Screw, hinge to ‘A’ post 27 163.009 4 Washer, plain 28 164.021 4 Washer, spring 29 161.032 4 Nut 30 122.183 4 Rubber buffer 31 152.113 4 Rivet, buffer to hinge 32 163.013 4 Washer, plain 33 164.015 4 Washer, spring 34 161.024 4 Nut 35 133.268 2 Connector 36 172.191 4 Clip, rod to lock 37 152.114 2 Fastener, non adjustable rod 38 172.261 2 Retainer, rod to door 39 141.143 1 RH, release handle 141.144 1 LH, release handle 40 141. 145 4 Bezel, black plastic 41 163.013 6 Washer, plain 42 164.015 6 Washer, spring 43 162.060 6 Screw 44 133.610 1 RH operating rod 133.611 1 LH operating rod 45 133.612 1 RH locking rod, adjustable (illustrated) 133.613 1 LH locking rod, adjustable (illustrated) 133.614 1 RH locking rod, non adjustable (not ill.) 133.615 1 LH locking rod, non adjustable (not ill.) 46 133.598 1 RH door lock 133.599 1 LH door lock 47 133.449 1 RH stricker plate 133.450 1 LH stricker plate 48 133.120 A/R Shim 49 162.146 6 Screw, lock to door 50 162.098 2 Screw, stricker plate (long) 51 162.058 4 Screw, stricker plate (short) 52 133.122 2 Tapping plate, top 53 133.121 2 Tapping plate, bottom 54 141.049 2 Handle, door pull 55 162.142 4 Screw
Lock fitting kitDesigned to prevent the lock from rotating in the door shim.
Part nr.
141.968
Door mirror arm on spring(incl. rubber gasket & screws)
• 141.123 LH mirror arm• 141.122 RH mirror arm
Part nr.
141.125
Mirror head
Racing mirrorOriginally this racing mirror was designed for Mini! Due to it’s success these mirrors can be found on many classic cars.• 141.851 LH door• 141.850 RH door
Chrome plated door mirror(including all pieces shown on photo)
• 141.113 LH door• 141.112 RH door
Also available: black painted door mirror
• 141.115 LH door• 141.114 RH door
© V a n G e s t e l B & C 2 0 0 570
Door fittings, part 2
71© V a n G e s t e l B & C 2 0 0 5
Door fittings, part 2
ILL N° PART N° QTY DESCRIPTION 1 140.189 1 RH quarter light with curved handle (A) 140.190 1 LH quarter li1ht with curved handle (A) 140.191 1 RH quarter ight with flat handle (B) 140.192 1 LH quarter light with flat handle (B) 2 140.193 1 GT RH quarter light with curved handle (A) 140.194 1 GT LH quarter light with curved handle (A) 140.195 1 GT RH quarter light with flat handle (B) 140.196 1 GT LH quarter light with flat handle (B) 3 121.057 1 RH seal 121.058 1 LH seaI 4 121.070 1 GT RH seal 121.071 1 GT LH seal 5 122.012 2 Corner block 6 121.060 4 Channel seal, front or rear 7 121.025 1 RH seal, ventilator seating 121.026 1 LH seal, ventilator seating 8 121.218 2 GT seal, ventilator seating 9 120.015 2 Glass, clear 120.042 2 Glass, tinted 10 120.043 1 GT RH glass, clear 120.044 1 GT LH glass, clear 120.045 1 GT RH glass, tinted 120.046 1 GT LH glass, tinted 11 133.150 1 RH top pivot 133.151 1 LH top pivot 12 133.154 1 RH lower pivot 133.155 1 LH lower pivot 13 133.616 1 RH top pivot, GT 133.617 1 LH top pivot, GT 14 133.618 1 RH lower pivot, GT 133.619 1 LH lower pivot, GT 15 162.158 4 Rivet, top pivot 16 162.115 4 Screw, lower pivot 17 162.159 6 Screw, cap 18 162.527 4 Screw, bracket 19 162.528 4 Screw, frame 20 162.168 4 Screw 21 164.002 4 Washer, spring 22 152 … 2 Rivet 23 161.060 4 Nut, ventilator mounting 24 164.012 1 Washer, spring 25 133.622 2 Reinforcement plate, rear 26 133.623 2 Reinforcement plate, front 27 133.624 A/R Adjusting plate 28 161.019 2 Nut 29 164.012 2 Washer, spring 30 163.010 2 Washer, plain 31 133.626 A/R Packing, ventilator to door 32 121.061 2 Seal, glass fixing (Before using this special seal wet the seal with thinner n° 186.060, the rubber will be very soft and transformable) 33 140.049 1 RH inner frame 140.050 1 LH inner frame 34 141.370 1 RH inner frame, GT 141.371 1 LH inner frame, GT 35 141.372 1 RH capping, outer frame 141.373 1 LH capping, outer frame 36 141.374 1 RH capping, outer frame, GT 141.375 1 LH cappin~, outer frame, GT 37 133.161 1 RH channe , drain 133.162 1 LH channel, drain 38 141.376 1 RH channel, drain, GT 141.377 1 LH channel, drain, GT
ILL N° PART N° QTY DESCRIPTION 39 133.207 2 Repair screw, on 2 hole plate 40 133.202 2 Repair screw, on 1 hole plate 41 133.160 2 Pivot for Roadsters 133.627 2 Pivot for GT 42 133.159 2 Distance piece 43 163.010 4 Washer, plain 44 171.013 2 Spring 45 161.061 2 Nut 46 133.157 1 RH HANDLE, CURVED (A) 133.158 1 LH handle, curved (A) 47 133.437 1 RH handle, flat (B) 133.438 1 LH handle, flat (B) 48 133.156 2 Bracket for curved handle (A) 133.513 2 Bracket for flat handle (B) 49 164.037 2 Washer, waved 50 172.204 2 Pin 51 133.628 2/1 RH bracket (2 screw fixing type) 2 for Roadster, 1 for GT 133.629 2/1 LH bracket (2 screw fixing type) 2 for Roadster, 1 for GT 52 133.630 1 RH bracket, GT only (early type) 133.631 1 LH bracket, GT only (early type) 53 133.632 2/1 RH bracket, 2 for Roadster, 1 for GT 133.633 2/1 LH bracket, 2 for Roadster, 1 for GT 54 133.634 1 RH bracket, GT only 133.635 1 LH bracket, GT only 55 162.507 2 Set of 10 screws, nuts, washers & spring washers 56 134.034 1 RH rear channel 134.035 1 LH rear channel 57 162.058 2 Screw 58 163.029 2 Washer, countersunk 59 120.016 1 RH door glass, clear 120.017 1 LH door glass, clear 120.047 1 RH door glass, tinted 120.048 1 LH door glass, tinted 60 120.018 1 RH door glass, GT, clear 120.019 1 LH door glass, GT, clear 120.049 1 RH door glass, GT, tinted 120.050 1 LH door glass, GT, tinted 61 121.061 2 Seal, glass to channel 62 134.033 2 Lower channel 63 132.350 1 RH window regulator 132.351 1 LH window regulator 64 162.076 14 Screw 65 164.012 14 Washer, spring 66 163.011 14 Washer, plain 67 133.636 2 Stop, regulator arm 68 163.008 2 Washer, plain 69 164.002 2 Washer, spring 70 161.008 1 Nut 71 133.265 2 Handle, window regulator 72 133.266 2 Washer, fibre 73 133.267 2 Screw, spring washer & escutcheon 74 162.312 2 Screw 75 164.015 2 Washer, spring 76 133.264 2 Escutcheon, chrome 77 133.113 2 Buffer, felt 78 133.111 1 RH bracket, glass stop (Roadster) 133.112 1 LH bracket, glass stop (Roadster) 133.637 1 RH bracket, glass stop (GT) 133.638 1 LH bracket, glass stop (GT) 79 172.069 8 Nut, spire 80 162.145 8 Screw
Chrome plated ‘RAC’ badgevery high quality finish
Part nr.
085.158
Steel badge clamp
fits on badge bar
Part nr.
185.049
Stainless steel fixing plate162.312 chrome plated screw • 161.047 nylock nut
Part nr.
133.834
Chrome plated badge bar with lamp bracketsPart nr.
140.273
© V a n G e s t e l B & C 2 0 0 572
Bumpers and grill
73© V a n G e s t e l B & C 2 0 0 5
Bumpers and grill
ILL N° PART N° QTY DESCRIPTION
1 140.028 1 Rear bumper 2 140.029 1 RH over rider, rear 140.030 1 LH over rider, rear 3 133.650 1 Complete bolting kit, rear bumper to bumper brackets, number plate fixing & bumper fillers with fixing screws 4 140.031 1 Front bumper 5 140.032 2 Front over rider 6 133.649 1 Complete bolting kit, front bumper to bumper brackets. Included are all bolts, nuts, brackets, washers, spacers and also the brackets and screws for the number plate fixing 7 140.033 1 Chrome grill assembly 8 133.651 1 Complete screw kit, grill fixing 9 133.080 1 Set of 3 brackets 10 164.012 2 Washer, spring 11 161.019 2 Nut 12 141.042 1 Bumper filler pair 13 132.097 2 Spring bar, rear 14 133.070 10 Washer, spacer 15 162.124 2 Bolt 16 164.006 2 Washer, spring 17 163.023 2 Washer, plain 18 161.045 2 Nut 19 164.011 2 Washer, spring 20 163.031 4 Washer, plain 21 162.067 6 Chrome bolt, washers & nut 22 163.014 6 Washer, plain 23 164.006 6 Washer, spring 24 161.026 6 Nut 25 132.098 2 Bracket, bumper 26 133.177 1 Bolting kit, rear bumper brackets to chassis 28 133.078 2 Brackets 29 122.007 2 Rubber spaces 30 163.032 2 Washer, plain 31 164.006 2 Washer, spring 32 162.211 2 Bolt 33 161.026 4 Nut
ILL N° PART N° QTY DESCRIPTION
34 164.006 4 Washer, spring 35 163.014 4 Washer, plain 36 162.124 2 Bolt 37 132.099 1 RH bracket 132.100 1 LH bracket 38 133.082 1 Bolting set, front brackets to chassis 39 132.046 1 Number plate 132.927 1 Number plate, stainless steel 40 133.079 2 Brackets 41 162.123 2 Screw 42 163.011 2 Washer, plain 43 164.012 2 Washer, spring 44 161.019 2 Nut 45 162.125 2 Screw 46 164.012 2 Washer, spring 47 161.019 2 Nut 48 121.008 1 Moulding 49 162.060 3 Screw, pan pozi 50 163.013 3 Washer, plain 51 164.015 3 Washer, spring 52 161.024 3 Nut 53 162.126 3 Screw, grill to brackets 54 122.009 2 Buffer, grill to bonnet 55 162.029 3 Screw, grill to radiator duct 56 164.012 3 Washer, spring 57 163.011 3 Washer, plain 58 133.652 2 Towing eye bracket 59 141.043 1 Centre piece only 60 141.044 1 Badge grill 61 172.031 6 Clip 62 162.061 6 Screw 63 132.096 1 Number plate rear 132.928 1 Number plate rear, stainless steel 64 122.008 2 Buffer, number plate 65 162.123 2 Screw 66 168.029 4 Washer, packing 67 163.011 2 Washer, plain
© V a n G e s t e l B & C 2 0 0 574
Windscreen
75© V a n G e s t e l B & C 2 0 0 5
Windscreen
ILL N° PART N° QT DESCRIPTION
1 120.002 1 Windscreen glass, clear 120.003 1 Windscreen glass, tinted 2 121.018 1 Glazing seal 3 121.019 1 Seal, windscreen frame to body 4 121.020 1 RH pillar seal 121.021 1 LH pillar seal 5 121.022 2 Seal, pillar side 6 140.021 2 Seal retainer, into seal 7 134.152 2 Seal retainer on pillar side 8 152 … 8 Rivet 9 162 … 4 Screw 10 141.017 1 Screw set, windscreen frame (nO 1 1>14) 11 162.531 4 Top screws, short, chrome 12 162.532 2 Top screws, long, chrome 13 162.533 4 Bottom, side screw, zinc plated 14 162.534 4 Bottom screw, zinc plated 15 133.641 2 Tapping plate, top 16 133.642 1 Tapping plate, bottom, RH 133.643 1 Tapping plate, bottom, LH 17 141.379 1 Bracket centre rod, bottom, European 141.380 1 Bracket centre rod, bottom, US 18 133.644 1 Tapping plate 19 162.535 2 Chrome plated H.T. screws, with point 20 164.042 2 Washer spring, chrome plated 21 163.076 2 Washer plain, chrome plated 22 162.103 4 Bolt, frame to body 23 164.006 4 Washer, spring 24 163.014 2 Washer, plain 25 163.026 2 Washer, plain, ‘D’ outer 26 133.645 1 Bolting kit, frame to body (included illustration numbers 19to 25) 27 141.020 A/R PACKING 28 141.019 2 Spacer bloc, alluminium 133.646 2 Spacer block, plastic (not original but an alternative product) 29 133.647 1 RH, ‘A’ post windscreen leg cover 133.648 1 LH, ‘A’ post windscreen leg cover 30 152.014 1 Rivet (set of 10 pieces) 31 152.019 1 Fastener, stud (set of 10 pieces) 32 141.381 1 Bracket, centre rod top, European 133.417 1 Bracket, centre rod top & mirror fixing, US 33 141.016 2 Bracket, hood clamps 34 131.416 1 Windscreen assembly, European, clear glass 131.417 1 Windscreen assembly, European, tinted glass 131.418 1 Windscreen assembly, US, clear glass 131.419 1 Windscreen assembly, US, tinted glass
LL N° PART N° QT DESCRIPTION
35 140.017 1 Top rail, early (European) 134.153 1 Top rail, late (US) 36 140.018 1 RH pillar 37 140.019 1 LH pillar 38 140.020 1 Bottom rail, European 134.154 1 Bottom rail, US 39 150.344 1 Pair sun visors, LHD 150.345 1 RH sun visor with mirror 150.346 1 LH sun visor 40 150.347 1 Sun visor kit, complete 41 122.075 2 Rubber block, sun visor 42 152.086 4 Rivet, short 152.089 4 Rivet, long 43 133.499 2 Pivot bracket 44 164.017 2 Double spring washer 45 163.066 2 Cup washer 46 161.047 2 Self locking nut 47 141.071 1 Mirror, rear view 48 140.016 1 Chrome centre bar (Thread on top side only) 49 161.040 1 Dome nut, chrome plated 50 161.024 1 Lock nut 51 141.342 1 Chrome centre bar (Thread on both sides) 52 161.276 1 Bottom nipple 53 141.288 1 Interior mirror (dipping) 54 162.049 2 Screw, mirror fixing 55 150.348 2 GT sun visor, grey, ‘65-’76 150.349 1 GT sun visor, grey & black, ‘76-’80 drivers side (LHD) 150.350 1 GT sun visor, grey & black, ‘76-’80 passenger side (LHD) with mirror 56 133.500 1 GT retainer (European type) 133.501 1 GT retainer (USA type) 57 162.338 2 Screw 58 162.049 2 Screw 59 141.343 1 GT mirror, rear view 60 141.344 1 GT mirror arm 61 133.502 1 Buffer 62 162.427 3 Screw 63 133.503 1 Cover 64 133.504 1 Arm 65 133.505 1 Sucker stem 66 133.506 1 Base 67 141.345 1 GT mirror, dipping
Clamp type mirrorgold painted back
Part nr.
141.071
Late type, dipping 2 screw fix
Part nr.
141.288
© V a n G e s t e l B & C 2 0 0 576
Windscreen washer components & mirrors
ILL N° PART N° QTY DESCRIPTION
1 083.047 2 Water Jet, Roadster 2 083.060 1 Water Jets, GT 3 083.055 1 Tubing set 4 083.058 A/R Rubber strap 5 083.046 1 Pump 6 083.294 1 Pump, electric 7 083.553 1 Original type, water container 8 083.554 1 Strap, for original container 9 083.049 1 Cap 10 083.054 1 Valve, non return 11 083.050 1 MGB container 12 083.061 1 Bracket
ILL N° PART N° QTY DESCRIPTION
13 083.314 1 Cap and non return valve 14 083.056 1 ‘T’ piece 15 083.555 1 ‘T’ piece with non return valve 16 083.057 1 Non return valve, in line 17 141.192 1 Mirror, no drilling holes, clamps on quarter lights 18 141.070 2 Racing mirror 19 141.011 1 RH wing mirror 1 LH door mirror 141.012 1 LH wing mirror 1 RH door mirror
ILL N° PART N° QTY DESCRIPTION
20 141.116 2 RH or LH mirror arm, on spring 21 141.117 2 Round mirror 22 141.112 1 RH door mirror, chrome 141.113 1 LH door mirror, chrome 141.114 1 RH door mirror, black 141.115 1 LH door mirror, black 23 141. 122 1 RH mirror arm, on spring 141. 123 1 LH mirror arm, on spring 141.124 2 Straight arm 24 141.125 2 Mirror 25 141.069 2 Wing mirror
77© V a n G e s t e l B & C 2 0 0 5
Seats
ILL N° PART N° QTY DESCRIPTION
2 156.001 1 Pair seat covers, black leather with white piping 156.002 1 Pair seat covers, black leather with red piping 156.003 1 Pair seat covers, red leather with white piping 156.004 1 Pair seat covers, red leather with black piping 156.064 1 Pair seat cover kit, black leather with black piping for with or without headrests (1969) 3 NA 2 Head rest assembly, black leather 4 NA 2 Head rest cover, black leather 5 NA 4 Sleeve-finishing 6 133.253 4 Bush-friction 7 133.254 4 Retaining clip 8 141.146 2 Rake adjusting handle 9 162.307 2 Screw, rake adjusting 10 133.255 2 Tilt knob handle 11 152.032 A/R Clip, seat cover to frame 12 132.175 1 RH seat frame (1967-’68) 132.176 1 LH seat frame (1967-’68) 132.177 2 Squab frame (1967-’68) 131.198 1 RH, frame pair (1969) 131.199 1 LH, frame pair (1969) 13 153.058 2 Seat diaphragm
ILL N° PART N° QTY DESCRIPTION
14 152.041 16 Hook, seat diaphragm to frame 15 157.005 1 RH seat base foam (1967-’68) 157.006 1 LH seat base foam (1967-’68) 157.011 1 RH seat foam (1969) 157.012 1 LH seat foam (1 969) 16 157.007 2 Squab foam (1967-’68) 157.013 2 Squab foam (1969) 17 132.178 2 Squab hardboard (1967-’68) 132.181 2 Squab hardboard 18 132.179 1 KIT - RH + LH seat rails & runners 19 132.180 1 KIT - all fasteners for slides to frames and runners to floor 20 162.303 16 Screw, slide to frame 21 163 … 16 Washer, plain 22 161.012 16 Nut, self locking 23 134.039 4 Floor runner 24 134.040 4 Wooden spacer, under rail 25 162.065 8 Screw, floor runner to floor 26 163.040 8 Spacer, floor runner to floor 28 156.053 1 Rear seat cover, black leather with white piping (1967-’68) 156.054 1 Rear seat cover, black leather with red piping (1967-’68) 156.055 1 Rear seat cover, red leather with white piping (1967-’68)
ILL N° PART N° QTY DESCRIPTION
156.056 1 Rear seat cover, red leather with black piping (1967-’68) 156.009 1 Rear seat cover, black vinyl with white piping (1967-’68) 156.010 1 Rear seat cover, black vinyl with red piping (1967-’68) 156.011 1 Rear seat cover, red vinyl with white piping (1967-’68) 156.012 1 Rear seat cover, red vinyl with black piping (1967-’68) 156.065 1 Rear seat cover kit, black leather with black piping (1969) 156.066 1 Rear seat cover kit, black vinyl with black piping (1969) 29 152.009 4 Two screw base fastener 30 162.102 8 Screw 31 133.174 3 Hinge, squab to floor 32 164.015 12 Washer, spring 33 162.060 12 Screw 34 133.175 2 Catch 35 162.047 4 Screw 36 164.015 4 Washer, spring 37 161.042 4 Chrome dome nut 38 133.176 2 Staple securing 39 162.163 4 Screw 40 163.007 4 Washer
© V a n G e s t e l B & C 2 0 0 578
Trim
ILL N° PART N° QTY DESCRIPTION
1 150.181 1 Dashtop recovering kit 2 150.048 1 Crash roll assembly (includes Ill. N°3) 3 152.047 8 Fasteners 4 150.182 1 Crash roll recovering kit, included foam, vinyl and piping 5 150.183 1 Panel behind radio conzoll, black 6 133.269 1 Conzoll radio speaker, European 7 162.162 4 Screw 8 163.039 4 Cup washer 9 150.153 1 Wooden panel behind panel speaker 10 133.172 1 Grill, radio speaker 11 133.173 1 Bezel, grill (included nuts & washers) 12 163.034 4 Washer, plain 13 164.023 4 Washer, spring 14 161.054 4 Nut 15 133.270 1 Conzoll radio, U.S. 16 083.063 1 Radio hole banking kit
ILL N° PART N° QTY DESCRIPTION
17 083.148 1 Map lamp assembly 18 140.046 1 Alloy Moulding, cockpit rear (not trimed) 19 162.311 1 Fastener kit, rear moulding (36 pieces) 20 133.149 2 End plates 21 162.157 2 Screw 22 150.041 1 Rear cockpit rail cover kit, black with black piping 150.042 1 Rear cockpit rail cover kit, black with white piping 150.043 1 Rear cockpit rail cover kit, black with red piping 150.044 1 Rear cockpit rail cover kit, red with white piping 150.045 1 Rear cockpit rail cover kit, red with black piping
ILL N° PART N° QTY DESCRIPTION
23 141.067 1 Ash tray 24 185.035 1 Leather covered gear lever knob 25 185.034 1 Wooden gear lever knob 26 150.206 1 Leather gear lever gaiter 150.207 1 Vinyl gear lever gaiter 27 121.100 1 Grommet, gear lever 28 141.149 1 Chrome rim, gaiter retainer 29 162.313 1 Chrome countersunk raised head POZI screw 162.204 3 Chrome countersunk raised head POZI screw 30 187.010 1 Glue spray
79© V a n G e s t e l B & C 2 0 0 5
Trim panels
ILL N° PART N° QTY DESCRIPTION
1 150.036 1 Pair MGC roadster, door cappings, black 150.185 1 Pair MGC GT, door cappings, black 150.037 1 Pair MGC roadster, door cappings red 150.186 1 Pair MGC GT, door cappings, red 2 150.029 2 Inner weather strip (cut to required length) 3 141.025 1 Set of 4 door capping finishers, MGC 141.147 1 Set of 4 door capping finishers, MGC GT 4 162.155 1 Set of 1 6 screws 5 151.613 1 Panel kit, MGC, black & black piping 151.614 1 Panel kit, MGC, black & white piping 151.615 1 Panel kit, MGC, black & red piping 251.092 1 Panel kit, MGC, red & white piping 251.093 1 Panel kit, MGC, red & black piping 151.617 1 Panel kit, MGC GT, black & black piping 151.618 1 Panel kit, MGC GT, black & white piping 151.619 1 Panel kit, MGC GT, black & red piping 251.094 1 Panel kit, MGC GT, red & white piping 251.095 1 Panel kit, MGC GT, red & black piping 6 151.030 1 Pair kick panels, black 151.031 1 Pair kick panels, red 7 151.156 1 Pair door panels, black with black piping 151.157 1 Pair door panels, black with white piping 151.158 1 Pair door panels, black with red piping 151.159 1 Pair door panels, red with white piping 151.160 1 Pair door panels, red with black piping 8 151.161 1 Pair rear quarter panels, MGC, black with black piping 151.162 1 Pair rear quarter panels, MGC black with white piping 151.163 1 Pair rear quarter panels, MGC, black with red piping
ILL N° PART N° QTY DESCRIPTION
151.164 1 Pair rear quarter panels, MGC, red with white piping 151.165 1 Pair rear quarter panels, MGC, red with black piping 151.166 1 Pair rear quarter panels, MGC GT, black with black piping 151. 167 1 Pair rear quarter panels, MGC GT, black with white piping 151.168 1 Pair rear quarter panels, MGC GT, black with red piping 151. 169 1 Pair rear quarter panels, MGC GT, red with white piping 151.170 1 Pair rear quarter panels, MGC GT, red with black piping 9 162.156 1 Screw & cup washer set (50 pieces) 10 150.038 1 Door seal, for 2 sides, black velour + rubber 150.039 1 Door seal, for 2 sides, red velour + rubber 150.040 1 Door seal, for 2 sides, black PVC + rubber 11 141.045 1 Set of 4, door seal finishers 12 162.309 1 Fastener kit, finishers to body 13 151.052 1 Rear bulkhead panel, black 151.053 1 Rear bulkhead panel, red 14 162.310 1 Fastener kit, rear bulkhead 15 141.143 1 RH, inside release 141.144 1 LH, inside release 16 133.268 2 Connectors 17 141. 145 4 Bezel, inside release to panel 18 133.265 2 Handle, window regulator 19 133.266 2 Washer, fibre 20 133.267 2 Screw, spring washer and escutheon set
ILL N° PART N° QTY DESCRIPTION
21 141.047 2 Pull, door handle 22 162.142 4 Screw 23 150.195 1 Pair GT rear eappings, black 150.196 1 Pair GT rear cappings, red 24 162.172 1 Screw and cup washer set for rear cappings and rear panels 25 151.137 1 Pair grey C post panels 26 172.138 A/R Panel clips 27 172.139 A/R Plugner cup, for clip 28 151.139 1 Pair A post finishers 29 150.023 2 Door seal, black velour + rubber 150.022 2 Door seal, red velour + rubber 150.024 2 Door seal, black PYC + rubber 30 150.205 2 Strip, retaining seal 31 162.061 12 Screws 32 132.184 2 Alluminium door steps (original) 33 185.042 2 Stainless steel doorstep with MG logo 34 150.026 2 Rear side seal, black velour + rubber 150.025 2 Rear side seal, red velour + rubber 150.027 1 RH, rear side seal, black PVC + rubber 150.028 1 LH, rear side seal, black PVC + rubber 35 151.140 1 Pair tailgate panels, black 151.141 1 Pair tailgate panels, red 36 151. 145 1 Headlining kit, grey 37 172.138 A/R Clip 38 172.139 A/R Clip plugner 39 150.200 1 Map pocket, black 150.201 1 Map pocket, red 40 141.148 1 Finisher, map pocket
© V a n G e s t e l B & C 2 0 0 580
Carpet sets
ILL N° PART N° QTY DESCRIPTION
1 151.666 1 MAIN CARPET SET, BLACK 151.667 1 MAIN CARPET SET, RED 2 150.210 1 Rubber foot rest, LH side of the tunnel 3 150.200 1 Map pocket, black 4 141.148 1 Finisher, map pocket 5 162.813 1 screw 6 163.184 1 black cup washer 7 151.254 1 Spare wheel cover, black 7 151.255 1 Spare wheel cover, Red 8 151.374 1 Pair of foot mats, black carpet 151.375 1 Pair of foot mats, red carpet
Our carpet sets are carefully made from tufted car carpeting for perfect fitting. The tunnel is premoulded and insulated together with all the floor mats. To improve insulation from noise and engine heat, you can put more felt under the floor
mats. All fasteners are included for installation, not only the fasteners on the carpets but also fasteners on floor.
ILL N° PART N° QTY DESCRIPTION
9 152.152 A/R Ring, carpet fastener 10 152.153 A/R Socket, carpet fastener 11 152.019 2 Set of 10 fasteners, male on floor 152.035 A/R Fasteners, male on floor 12 152.087 A/R Rivet 13 151.235 1 Boot carpet set, black 14 151.016 1 GT extra’s, black 151.017 1 GT extra’s, red 15 121.038 2 Heel mat with MG logo 16 187.011 A/R Glue, tube 17 187.009 A/R Glue for carpet, insulation felt etc.
ILL N° PART N° QTY DESCRIPTION
18 187.010 A/R Glue spray 19 153.056 1 Tool and jack bag 20 151.122 A/R One square meter black carpet 151.123 A/R One square meter red carpet 21 151.097 A/R One square meter insulation felt 22 190.229 1 MGB interiors, fitting instructions. This book will show you how to recover your seats, fit new carpets, recover the cockpit rail, all panels and door trim.
81© V a n G e s t e l B & C 2 0 0 5
Hoods and soft tops
ILL N° PART N° QTY DESCRIPTION
1 153.014 1 Hood with header rail and seal for “Grey folding frame type” made from black PVC HOODS ONLY 2 153.015 1 Hood only, black PVC 153.018 1 Hood only, black Canvas 153.305 1 Hood only, black Mohair 153.016 2 Hood only, white PVC 153.017 1 Hood only, beige PVC 153.019 1 Hood only, beige Mohair 3 152.015 2 Back plate 4 152.016 2 Tongue 5 152.034 1 Rivet (set of 10) 6 153.055 2 Hood strap 7 163.024 4 Washer, cup
ILL N° PART N° QTY DESCRIPTION
8 162.100 4 Screw 9 152.074 1 Kit, hood fasteners on body 10 161.024 8 Nut 11 152.034 A/R Rivet (set of 10) 12 152.035 2 Stud, tonneau cover to body 13 152.023 2 Socket, stainless steel 14 152.015 2 plate under socket, polished stainless steel 15 134.094 1 Back bar, hood 16 134.095 1 Header rail 17 133.298 2 Pad, header rail 18 162.101 4 Screw 19 142.001 2 Hood catch 20 162.051 4 Screw 21 164.015 4 Washer
ILL N° PART N° QTY DESCRIPTION
22 134.007 1 Seal retainer 23 152.034 A/R Rivet (set of 10) 24 121.017 1 Seal, header rail 25 142.003 2 Socket, chrome plated 26 152.005 2 Plate hood retaining 27 152.056 2 Fixing kit, retainer to body 28 152.022 8 Fastener, hood to body 29 187.068 1 Spray, frame paint, grey 30 155.004 1 Folding frame, grey 31 152.075 1 Kit, frame to body 32 152.072 1 Set of 6 studs and rivets 33 152.076 1 Kit, header rail to frame 37 164.015 8 Washer, spring 38 085.052 1 Hood label
© V a n G e s t e l B & C 2 0 0 582
Tonneau covers and luggage racks
IIL N° PART N° QTY DESCRIPTION
TONNEAU COVERS 1 153.025 1 Black PVC, A= 141 cm 153.308 1 Black Mohair, A= 141 cm 153.026 1 White PVC, A= 141 cm 153.027 1 Beige PVC, A= 141 cm 153.029 1 Beige Mohair, A= 141 cm 153.045 1 Black PVC, A= 150 cm 153.309 1 Black Mohair, A= 150 cm 153.046 1 White PVC, A= 150 cm 153.049 1 Beige Mohair, A= 150 cm HOOD COVERS 2 150.116 1 From black PVC 150.119 1 From black Canvas 150.316 1 From black Mohair 150.117 1 From white PVC 150.118 1 From beige PVC 150.120 1 From beige Mohair
IIL N° PART N° QTY DESCRIPTION 3 152.015 2 Back plate 4 152.016 2 Tongue 5 152.042 1 Rivet (set of 10) 6 134.008 1 RH rail for cover 7 134.009 1 LH rail for cover 8 153.030 1 Stowage bag for cover rails 9 150.296 1 Bag for tonneau cover, hood cover 10 185.019 1 Punch & bed kit (for fasteners n° 27,28) 11 200.419 1 Revolving punch pliers 12 152.009 A/R Stud, two screw base 13 162.102 A/R Screw 14 152.022 A/R Stud 15 163.013 A/R Washer, plain 16 164.015 A/R Washer, spring 17 161.024 A/R Nut 18 152.030 A/R ‘Lift the dot’ fastener
IIL N° PART N° QTY DESCRIPTION 19 152.031 A/R Plate, fastener locking 20 152.019 A/R Base (set of 10) 21 152.020 A/R Bottom fastener (set of 10) 22 152.017 A/R Top cap (set of 10) 23 152.018 A/R Socket (set of 10) 24 152.108 A/R Base on tube, one 25 185.021 2 Safety belt, European approved 26 185.015 2 Safety belt, European approved, automatic retractor all positions 27 140.051 1 Original type luggage rack, included all fittings 28 162.166 6 Chrome screw, pan pozi head 29 163.008 6 Washer, plain 30 164.002 6 Washer, spring 31 161.002 6 Nut 32 140.066 1 Universal boot rack. Alluminium frame with wooden slats. Easy fitting, no drilling holes
TONNEAU COVERS There are two important things to remember when ordering tonneau covers. First, our tonneau covers listed below are FOR LEFT HAND DRIVE CARS ONLY. Secondly, there are TWO LENGHTS. When a metal dashboard is fitted, the studs placed at the front are 11 cm from the windscreen frame and when a foam padded fascia is fitted, the central front stud is more at the front; 5 cm from the windscreen frame. To avoid mistakes, please measure the overall lenght (A): 141 cm or 150 cm
83© V a n G e s t e l B & C 2 0 0 5
Hard top
ILL N° PART N° QTY DESCRIPTION
155.006 1 HARD TOP ORIGINAL 155.007 1 HARD TOP REPLICA 2 152.040 A/R Rivet 3 134.029 1 Retainer, center seal 140.034 1 Retainer, RH rear seal 140.035 1 Retainer, LH rear seal 4 121.047 2 Insert, seal 5 121.048 1 Seal, hard top to body 6 140.037 1 LH moulding 7 140.036 1 RH moulding 8 152.040 A/R Rivet 9 133.123 2 Location, rear 10 163.010 4 Washer, plain 11 164.012 4 Washer, spring 12 162.029 4 Screw 13 121.049 2 Seal, door top 14 163.037 4 Washer, cup 15 162.152 4 Screw, door seal end
ILL N° PART N° QTY DESCRIPTION
16 162.060 2 Screw 17 164.015 2 Washer, spring 18 133.124 2 Clip 19 162.020 2 Screw 20 163.001 2 Washer, plain 21 133.125 2 Bracket, side of hard top 22 162.648 2 Washer, plain 23 103.010 2 Washer, plain 24 164.012 2 Washer, spring 25 162.029 2 Screw, locating to hood socket 26 133.126 2 Bracket, side locating 27 121.050 1 Strip, finisher 28 121.051 1 Rubber, back light 29 120.011 1 Glass, rear 30 162.148 8 Screw, window finisher 31 140.038 1 RH finisher window 140.039 1 LH finisher window
ILL N° PART N° QTY DESCRIPTION
32 162.149 8 Screw, window to hard top 33 140.040 1 RH, top rail 140.041 1 LH, top rail 34 133.127 2 Bracket, top corner 35 133.128 2 Bracket, rear corner 36 133.129 2 Bracket, front corner 37 120.012 2 Glass 38 121.052 2 Glazing rubbers 39 140.042 1 RH front rail 140.043 1 LH front rail 40 162.150 24 Screw (6.35 mm) 162.151 12 Screw (12.70 mm) 41 140.044 1 RH bottom rail 140.045 1 LH bottom rail 42 121.053 1 RH bottom seal 121.054 1 LH bottom seal
© V a n G e s t e l B & C 2 0 0 584
GT specials
ILL N° PART N° QTY DESCRIPTION
1 121.039 1 Front glazing, rubber 2 120.004 1 Front screen, clear 120.005 1 Front screen, tinted 3 121.044 1 Filler rubber 4 134.011 1 Top finisher 5 134.012 1 Bottom finisher 6 134.013 1 RH finisher 134.014 1 LH finisher 7 133.074 1 Corner finisher, top 8 133.075 1 Corner finisher, bottom 9 121.040 1 Rear glazing, rubber 10 120.009 1 Rear screen, clear & heated 120.010 1 Rear screen, tinted & heated 11 121.044 1 Filler, rubber 12 140.022 1 RH finisher 13 140.023 1 LH finisher 14 133.076 1 Finisher, clip 15 141.366 1 MGC GT letterset 16 140.024 1 RH front finisher 140.025 1 LH front finisher
ILL N° PART N° QTY DESCRIPTION
17 140.026 1 RH rear finisher 140.027 1 LH rear finisher 18 133.077 1 Finisher clip 19 134.015 1 RH ‘B’ post finisher 134.016 1 LH ‘B’ post finisher 20 134.019 1 RH rear bottom finisher 134.020 1 LH rear bottom finisher 21 134.017 1 RH door finisher 134.018 1 LH door finisher 22 134.032 1 Seal retainer 23 121.055 1 Rubber boot lid-outer 24 121.032 1 Rubber boot lid-inner 25 141.056 1 RH stay assembly 141.057 1 LH stay assembly 26 141.058 1 Cover 27 150.022 1 Red door seal (velour) 150.023 1 Black door seal (velour) 150.024 1 Black door seal (plastic)
ILL N° PART N° QTY DESCRIPTION
28 150.025 1 Red side seal (velour) 150.026 1 Black side seal (velour) 150.027 1 RH black seal (plastic) 150.028 1 LH black seal (plastic) 29 131.096 1 RH quarter light ass. 131.097 1 LH quarter light ass. 30 133.147 1 RH frame hinge 133.148 1 LH frame hinge 31 141.059 1 RH catch toggle 141.060 1 LH catch toggle 32 121.056 1 Rubber, glazing 33 120.013 1 RH glass, clear 120.014 1 LH glass, clear 34 141.061 1 RH ‘A’ post finisher 141.062 1 LH ‘A’ post finisher 35 152.042 2 Large cap cover 36 152.043 2 Small cap cover 37 122.025 2 Blanking grommet
85© V a n G e s t e l B & C 2 0 0 5
Grommets and blanking plugs
ILL N° PART N° QTY DESCRIPTION APPLICATION
1 122.062 2 Blanking rubber, brake and clutch master cylinder 2 122.031 1 Plug, gearbox dip stick hole 3 121.646 1 Grommet kit for bulkhead 4 122.291 1 Grommet, main wiring loom through bulkhead 5 122.016 2 Grommet, headlamp wiring loom 6 122.005 2 Grommet, door switch wiring loom 7 122.004 1 Grommet, windscreen washer tubing 8 122.003 1 Grommet, choke cable 9 083.097 1 Grommet, pipe oil pressure 10 122.002 1 Grommet, capillair water temperature meter 11 122.002 1 Grommet, heater valve cable 12 122.004 1 Grommet, speedo meter cable 122.004 1 Grommet, tacho cable 13 122.006 1 Grommet, tail loom through boot floor 14 122.004 1 Grommet, vent hose fuel side of the fuel pump 122.004 1 Grommet, vent hose contact breaker side of the fuel pump 15 122.002 1 Grommet, wiring loom to tank unit 16 122.005 2 Grommet, wiring loom number plate lamps 18 122.032 4 Blanking plug, clear plastic, fitted into the front of the door
ILL N° PART N° QTY DESCRIPTION APPLICATION
19 122.032 8 Blanking plug, clear plastic, fitted Nov 1967 on into the floor panels 20 122.215 2 Blanking plug, black rubber, Up to Nov 1967 rear shock absorber filling hole 122.030 2 Blanking plug, clear plastic, Nov 1967 on rear shock absorber hole 21 122.243 2 Blanking plug, clear plastic, fitted on the rear side of the boot floor 22 122.241 1 Blanking plug, black rubber, fitted on de left side of the boot floor 23 122.215 1 Blanking plug, black plastic, steering Up to Nov 1967 column hole 122.030 1 Blanking plug, clear plastic, steering Nov 1967 on column hole 27 122.035 4 Cable cross rubber 28 133.179 4 Bracket 29 164.012 8 Washer, spring 30 161.019 8 Nut 31 122.034 1 Cable cross rubber 32 133.178 1 Bracket 33 162.005 2 Screw 34 164.002 2 Washer, spring
© V a n G e s t e l B & C 2 0 0 586
Weber carburettors and accessories
Part nr.
190.428
Speedpro series, Weber & DellortoDCOE & DHLA Carburettors, the sidedraft carburettors, how to build, power tune, strip and rebuild. How to get the right set up for your engine. 112 pages
Haynes carburettor workshop manualThis manual covers Weber, Stromberg & SU carburettors. Many illustrations and excellent step by step explainations. 350 pages
Weber inlet manifold kitIncluding linkageThis quality manifold kit comes complete with 3 inlet manifolds made from cast aluminium and all linkage parts. Here to the left you can see a complete set-up on an MGC including Weber carburettors and K&N airfilters (ask your Anglo Parts shop for more info on K&N filters). See below for other parts, quantities marked in red are for a complete set-up
Part nr.
106.004
Cup washer(order per 24)
Part nr.
101.422
Breather hose adaptorFor connecting the breather hose into the filter backplate 1/2” Flange, 3/4” long
Part nr.
106.001
One Weber 45 DCOE carburettor assemblyFor maximum power, we recommend that you set up the Webers to your & your engine’s specific requirements. Have it done by a professional, read the specific books (190.416 or 190.428) (order 3 Webers!)
Part nr.
106.008
Rampipe 45To be used with the K&N air filters(order 6 pieces)
Part nr.
101.340
Preset fuel pipe set • Aeroquip made for your triple Webers
• Easy to install
Part nr.
190.416
Part nr.
106.003
Grommet,vibration
(order per 12)
Gasket, sealing ring on plate(order per 3 )
Part nr.
106.002Part nr.
106.086
Sock type high performance filters for Webers
Part nr.
106.077
87© V a n G e s t e l B & C 2 0 0 5
Engine and power tuning
Formula Power lead setsSuper lead set, originally developed for race. Minimum loss and greatly extended cable life. Spiral magnetic 4 core 10mm blue silicon extreme heat resistance. Can also be fitted to a much more powerful coil if needed.
Form -A- Gasket Nr.1, 200ml gasket cement, tubeUse on both sides of the gasket or direct on the surface.
Part nr.
016.269
Part nr.
198.017
Form -A- Gasket nr. 1372, 200 ml gasket cement tube.
Use on both sides of a gasket or direct on the surface. Specially for high
temperatures up to 315°C. Also useful for exhaust pipe fitting.
Part nr.
181.055
Part nr.
011.205
Part nr.
011.589
Part nr.
024.208
Part nr.
190.225
Part nr.
000.000
Spin-on oil filterWith relief valve
Spin-on oil filter conversionOil filter changes can be quick, clean and painless
if you have got a spin-on oil filter. Convert now and get rid of
your messy cannister style filter
Close ratio gearkitStraight cut for 4 synchro gearbox
Modern lightweight replacement
startersThis modern reliable starter gives more torque with less power drain when starting,
this makes it ideal for daily use. They are also easier to install as they
are much lighter and smaller
Part nr.
082.149
Tuning SU CarburettorsMost mechanics and enthusiasts struggle when setting the twin SU carburettors correctly. This
book and a bit of practice will solve the problem. It is very important for your engine that the carburettor tuning is correct. This book
also covers all SU fuel pumps. 189 pages
© V a n G e s t e l B & C 2 0 0 588
Engine and power tuning
Mechanical oil temperature gaugeWater temp in C°
5/8” UNF
Oil temperature adaptorWith 1/2” BSP male/female connectors
5/8” UNF
Oilstat, 1/2” BSP maleBSP size 1/2” parallel thread, male O.D. = 13/16” or 20.6 mm
Part nr.
185.622
Part nr.
086.401
Part nr.
086.326Function The oilstats are designed to prevent flow of engine oil through the cooler until a 80°C temerature is reached. Prolonged use of a car engine in conditions where the oil cannot reach its correct working temperature will cause sludge formation and crankcase oil dilution, leading to excessive wear especially in the cylinder bores. Optimum engine power will only be delivered at correct temperatures. The elimination of drag in engines caused by cold oil is a most
important consideration, especially with a tuned engine. Operation Control of the oil flow in the thermostat is effected by a wax filled capsule, known as a “Waxstat”. The “waxstat” used is
set to direct oil through the cooler at 80°C. Construction The bodies of the thermostats are precision die cast aluminium units. The “Waxstat” is a mass produced proprietary unit,
subject to the most stringent quality controls. Fitting The thermostat can be fitted in any convenient place where the oil pipes run parallel. This is a more professional version that requires that the pipes have 1/2 BSP female connections. The weight of the thermostats are such that the hoses will support them without sagging, however a bracket is supplied with the slightly heavier
185.622 if further restraint is desired.
Mounting The standard specification includes adjustable body/chassis mountings to secure the fan adjacent to but not connected to the radiator - totally adjustable and therefore suitable for almost every vehicle. A no-cost option is direct radiator fitting incorporating moulded mountings that extend beyond the fan to provide a simple secure four point mounting without drilling, or use of spanners. (not recommended for aluminium core radiators).
Automatic Control Adjustable between 45 deg. C° and 120 deg. C° with 3 deg. C° differential. Advanced heavy-duty design allows continious on/off switching without a relay. A Simple sensor entry using patented silicone extruded rubber seal for capillary provides watertight entry without cutting hose or drilling radiator - see diagram.
Kenlowe Cooling fan kitIf your MGC suffers from overheating in modern traffic during high summer ambient we recommend
the Kenlowe is used in addition to the engine fan to provide extra cooling.
Lockheed servoAfter easy installation you will achieve maximum braking power. WARNING! Fitting a brake servo will not cure faulty brakes, therefor ensure that your braking system is in good working condition.
Part nr.
053.082
• noblackdust• nodiscdamage• nowarmup,instantresponseofcold• lastsfor15-32.000KM• anidealsolutionforallclassics,whether normal road or competition use.
Part nr.
053.295 Brake padsOnly the best of the best for your MGC! These magnificent brake pads will fit into your standard MGC brake callipers, but enlarging the pad area with 20%.
Part nr.
050.306 Grooved DiscsImprove your braking greatly with these modern treated brake discs.
Part nr.
185.128
89© V a n G e s t e l B & C 2 0 0 5
Suspension and Superflex bushes
Anti-tramp kit anti-bar kit
Car lowering kit
Part nr.
042.421
Part nr.
042.640
Part nr.
042.351
Uprated valvefor rear shock absorber
Part nr.
185.139
Rear bush, polyurethane
Part nr.
041.514
Pad, spring in polyurethane
Part nr.
041.515
Conversion bracket kit for Spax dempers
3
105
72
1
4
8
3
6
9
12
11
Fitting infoAll bushes will press in with the aid of a suitable vice with exception of 048.166 which may be fitted with a void bush puller, or cut in half at the wasted centre and fit from each end. This bush should have the large flange at the rear of the Kingpin.
• Easy to fit • Durable• Oil resistant • Self lubricating • Improved location • Long life• Tough • 2-Year road warranty • Non-perishing • Stainless steel sleeved (where aplicable)
FRONT SUSPENSIONIll. n° Partn° Description Qty
1 041.511* Top trunnion 2 2 048.166* Outer fulcrum 2 3 048.161* Top wishbone 4 4 048.162* Tie-bar front 2 5 048.163 Tie-bar rear 4 6 048.164* Torsion bar - bush 2 7 048.165 Anti-roll bar 2 8 041.507 Damper eye 2 9 041.922 Damper pin 4
REAR SUSPENSIONIll. n° Partn° Description Qty
10 041.513* Spring eye 2 11 041.515 Spring pad 4 12 041.514 Spring shackle bush 8
Parts marked with * denote stainless steel sleeve
© V a n G e s t e l B & C 2 0 0 590
These quality accessories are made from strong, finely finished solid wood. They are a must for the classical driver who likes that bit of extra finesse.Since the early fithties Moto-Lita has been designing and manufacturing unique steering wheels in wood and leather. Each steering wheel is a piece of artwork built by British craftsman. The wooden steering wheels are made from carefully selected cross-laminated timber which is bonded and rivetted to a high quality hand polished alloy 3 spoke frame. They are then handfinished with a hardwearing deep lustre which is resistant to petrol, oil and the elements.
Mark 3 Woodrim185.025 33cm Flat185.026 35cm Flat185.027 38cm Flat185.245 33cm Dish185.247 35cm Dish
Mark 3 Leather185.155 33cm Flat185.156 35cm Flat185.157 38cm Flat185.246 33cm Dish185.248 35cm Dish
Steering wheels and quality verneer dashboards
European up to 1969
Part nr.
150.895
High quality walnut veneer dashboardsThese dashboards are made from a thin layer of walnut verneer on a sturdy backplate with a thick layer of gloss varnish.
They are made to stick on the existing dashboard without having to screw or make holes. Applying these dashboards is easy and the finish is magnificent
Please note that Motolita Steering Wheels, shown on this page, are not original equipement and may not be legal for street use. Please check if the use of them is legal in your country or not.
185.082 Boss, up to 1969 European and up to 1968 USA models185.089 Boss, for USA 1968 and 1969 models without horn push
91© V a n G e s t e l B & C 2 0 0 5
Accessories, oil and body styling
Pair perspex headlamp cowls
Gives your lights that extra protection against stones & debry when racing & rallying
• 133.869 - fitting kit for cowlsSebring front spoiler
not included
Sebring Rear Valance from
fiberglassThe rear bumper must
be removed.
Sebring set of four wings Front spoiler NOT included !!!!
Stylish MGC chrome plated Mesh kit
This mesh kit comes with fitting parts & instructions. Same style as fitted on early Jaguars, Bentleys and modern day Jaguars.
Part nr.
185.103
Part nr.
300.137
Part nr.
232.721
Part nr.
131.786
Part nr.
131.785
Part nr.
131.322
Part nr.
023.365
Part nr.
046.062
Part nr.
284.092
Rear fog lampStyled with chrome rim
KnobGear change
Automatic transmission oilSpecially formulated for classic automatic transmissions
15” x 6” Alloy
wheel
Part nr.
046.02415” x 6”
Centre lock alloy
wheel
Works type gear knob
made in aluminium with a built-in overdrive switch
Part nr.
086.461
Part nr.
300.116
Mild EP, 1 litreAn SAE 140 grade gear oil suitable for use
in bevel, worm and pre-1960 hypoid gears. Rated GL4 this gear oil does not possess the
additive package found in later GL5 gear oils which should not be used in veteran and
vintage vehicles as the additive packages in these oils attack metals such as bronze,
brass and copper.
© V a n G e s t e l B & C 2 0 0 592
Plates, labels, stickers and patches
Part nr.
152.109
Union Jack badge in jewellers enamel
Set of 10 studs for rocker cover plates etc.
Part nr.
185.002
Chassis plate 1966-’70
Part nr.
085.059
Part nr.
152.110
Set of 10 screws & nuts 6-32 UNC x 1/4”
Rocker cover
Triplex laminated
For heaterbox& motor
Rocker cover
Tecalemit
Negative earth
Battery warning
Part nr.
085.003
Part nr.
085.002
Part nr.
085.014
Part nr.
085.008
Part nr.
085.007
Part nr.
085.006
Part nr.
085.005
Part nr.
085.037
Part nr.
085.080
MGC Roadster
Part nr.
085.070
MGC GT
Part nr.
085.071
Girling
Part nr.
085.074
Washer bottle sticker
Part nr.
085.042
Coopers air filter
Part nr.
085.011
Part nr.
152.034
Set of 10 rivets
Tire pressure label 085.050 MGC085.051 MGC GT
BMC Stickers 085.085 on screen085.086 on body
MG stickerPart nr.
085.122
93© V a n G e s t e l B & C 2 0 0 5
Books and CD-roms
Part n° Description
192.014 MGTA, TB, TC, TD & TF, 1936-’55192.015 MGA & twin cam, 1955-’62192.016 MGB & MGB GT, 1962-’69192.017 MGB & MGB GT, 1970-’74192.018 MGB & MGB GT, 1974-’80192.019 MGC & MGC GT, 1967-’69 MGB GT V8, ‘72-’76 & MGR V8, ‘92-’96 192.020 MG Midget & AH Sprite, 1964-’74192.021 MG Midget 1500, 1974-’79192.022 Mini range MKI-II, 1959-’69192.023 Mini range MKIII-IV, 1969-’85192.024 Mini + Cabrio, 1985-’00192.025 Mini Derivative models, 1964-’1991
Part n° Description
192.001 Morris Minor, 1948-’71192.002 Triumph TR2-3-3A, 1953-’62192.003 Triumph TR4-4A-5-250, 1961-’68192.004 Triumph TR6,1969-76192.005 Triumph TR7-8, 1975-’81192.006 Triumph Spitfire, 1962-’80192.007 Triumph GT6, 1966-’73192.008 Triumph Stag, 1970-’77192.009 AH 100 & 100/6, 1953-’59192.010 AH 3000, 1959-’68192.011 AH Sprite & MG Midget, 1957-’64192.012 BMC 1100 & 1300 range, 1962-’74192.013 Special tuning data & parts, 1950-’76
Original PC CD-rom Technical Publications The parts catalogue, workshop manual and driver’s handbook you need for your classic British car! Now for the first time owners and enthusiasts have the opportunity to effortlessly collect all these original publications for their car, on one handy and cost-effective CD Rom!
MG, Britain’s favourite sports car(by Malcolm Green)
This second edition from ‘Haynes Classic makes Series’ brings the MG story right up to date. This well-illustrated book charts all MGs from 1923 to present day. Also concentrates on models with particularly strong interest to classic car enthusiast. The authoritative text is supported with buying tips, impressions and data boxes.
176 pages, 150 b&w & colour illustrations. hardback.
The MG CollectionThe post-war models(by Richard Monk)The MG collection is a unique record of the post-war MG models and is the sequel to the author’s companion book on pre-war MGs. He has tracked down and photographed an example of practically every model and most of the variants, with all cars being original as possible. From MGTC 1948 to MGF 1998. 177 pages and fully illustrated in colour.
Enthusiasts colour seriesMG sports cars (By John Heilig) A full colour gallery of MG sports cars including pre-war chummy, Midgets, J-series, MGTA & MGTB and post-war series: MGTC-D-F, MGA, MGB, MGC and Midget. Also includes MGV8, MGRV8 & MGF. With model histories, evolution, specifications and technical notes.
Original SeriesFor correct and precise information on definitve factory specifications in every detail, from chrome trim to plug leads, there’s no better place to look than these books. Whether owner, buyer, restorer or enthusiast, you’ll find a combination of minutely reserched text and magnificent full-colour photographs - all specially commissioned - to tell you what you need to know. Hailes by magazine reviewers worldwide. The ‘Originals’ series is the works. Size 295 x 225 mm.
Part nr.
190.486
Part nr.
190.223
Part nr.
190.320
Part nr.
190.729Part nr.
190.119
MGC owners handbook As supplied with all new MGC’s. With detailed and practical information about your MGC, such as putting up the soft top and routine maintenance etc. All illustrations in B&W except cover.
Very handy parts & accessories booksThese two books are full of parts foryour MGC and other classic British cars.
MGB parts & accessories catalogue276 pages, more than 1000 colour photos
British parts, tools and accessories catalogue144 pages, more than 1400 colour photos
Part nr.
190.002
Part nr.
190.058
95© V a n G e s t e l B & C 2 0 0 5
ANGLO PARTS FAX ORDERFORM
Quantity Part n° Page n° Illustr. n° Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Client n° : Date :
Name : Shipping address if different :
Address :
Country : Country :
Tel/Fax :
E-mail :
To be shipped Will be collected Backorders, parts not in stock or available at this moment/ required or not
Q u a l i t y P a r t s & S e r v i c e
Payment : Visa Euro-card - Master card - Access
Card n°. :
Exp. date : badge code : Signature :
Model : Year :Chassis n° :Engine n° :
Fax numbersBELGIUM Fax +32 15 42 34 45 • NETHERLANDS, BOVEN-LEEUWEN Fax +31 318-551395ITALY Fax +39 0422 321 470 • GERMANY Fax +49 6441 781336 • FRANCE Fax +33 328 26 83 73 NETHERLANDS, GRUBBENVORST Fax +31 318-551395 • SPAIN Fax +34 93 225 27 91LUXEMBOURG Fax +352 518151-820 • HUNGARY Fax +36 1 254 08 08CZECH & SLOVAK REPUBLIC Fax: +42(0) 383 382 161
How to find us!
© V a n G e s t e l B & C 2 0 0 596
Notes
© A n g l o P a r t s n v 2 0 1 6 Q u a l i t y P a r t s & S e r v i c e
DOWNLOAD OUR OTHER ANGLO PARTS & ACCESSORIES CATALOGUES FOR FREE!d o w n l o a d t h e p d f v e r s i o n s o f o u r c a t a l o g u e s f o r f r e e a t w w w. a n g l o p a r t s . c o m o r b u y t h e m f o r 1 0 e u r o s p e r i t e m .
Triumph TR2-4Apart n° 190.243
Triumph Spitfirepart n° 190.133
Triumph TR5-250-6part n° 190.273
Mini 1969-2000part n° 190.720
Morris Minorpart n° 190.718
Land Rover Defender 90-1101984-2006
part n° 190.779
A.H. 100/4-3000part n° 190.509
Sprite-Midget 1965-’80part n° 190.518
Sprite-Midget 1958-’64part n° 190.504
Triumph GT6part n° 190.863
Jaguar XJ, Series I, II, IIIpart n° 190.780 British Parts, Tools & Accessories
part n° 190.058
Jaguar XK120-150part n° 190.694
Jaguar MKII-Daimler V8part n° 190.721
Jaguar E-typepart n° 190.695
MGTC part n° 190.275
MGTD-TF part n° 190.067
MGA part n° 190.001 MGB
part n° 190.002
MGCpart n° 190.158
MGF-TF 1996-2005part n° 190.519
www.angloparts.complease visit our website for all contact information
Anglo Parts ShopsMAIN BRANCH BELGIUMNETHERLANDS • ITALY • GERMANY
Authorized Anglo Parts DealersFRANCE • NETHERLANDS • SPAINSWEDEN • FINLAND • SWITZERLANDCZECH REPUBLIC • SLOVAKIALUXEMBOURG • POLAND • HUNGARY
F o u r t h E d i t i o n • 19 0 . 1 5 8 Q u a l i t y P a r t s & S e r v i c e
MGC 1967-1969PARTS & ACCESSORIES CATALOGUE
Related Documents
