Methane and Carbon Dioxide Production Rates in Lake Sediments from Sub-Arctic Sweden Joel DeStasio 1 , Madison Halloran 2 , Lance Erickson 3 , Ruth K Varner 4 , Joel E Johnson 5 , Jacob Setera 5 , Maria F Meana Prado 5 , Martin Wik 6 , Patrick M Crill 6 1. Departments of Natural Resources and the Environment and Earth Sciences, University of New Hampshire, Durham, NH, United States. 2. Department of Environmental Studies, Carleton College, Northfield, MN, United States. 3. Department of Geology, Gustavus Adolphus College, St. Peter, MN, United States. 4. Institute for the Study of Earth, Oceans, and Space, University of New Hampshire, Durham, NH, United States.5. Department of Earth Sciences, University of New Hampshire, Durham, NH, United States. 6. Department of Geological Studies, Stockholm University, Stockholm, Sweden. Introduction • Ecosystems at high latitudes are undergoing rapid change due to amplified atmospheric warming. Lakes in these regions are sources of both methane (CH 4 ) and carbon dioxide (CO 2 ) to the atmosphere and will likely be impacted by elevated temperatures. • CH 4 and CO 2 production potential of sediments were studied using cores from three lakes in the Stordalen Mire complex in sub-Arctic, Sweden: Inre Harrsjön, Mellan Harrsjön, and Villasjön. • Sediment cores were incubated to determine CO 2 and CH 4 production rates and were analyzed for CH 4 concentrations, dissolved inorganic carbon (DIC) concentrations, total organic carbon (TOC) concentrations, as well as carbon, nitrogen and sulfur content. Hypotheses • Sediments from areas within Villasjön known to have the highest rates of CH 4 ebullition (western end of VM transect) will yield the highest CH 4 concentrations and production rates. • CH 4 and CO 2 concentrations and production rates will be highest in organic rich sediments containing the highest TOC . VI1_8cm VI1_25cm VI1_40cm VI2_6cm VI2_26cm VI2_41cm 0 1 2 3 4 5 6 7 8 Villasjön CH4 incubations at 5C μg CH4 g-1ds day-1 Core/Sediment Depth (cm) VI1_8cm VI1_25cm VI1_40cm VI2_6cm VI2_26cm VI2_41cm 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 Villasjön CH4 incubations at 20C μg CH4 g-1ds day-1 Core/Sediment Depth (cm) VI1_6cm VI1_23cm VI1_38cm VI2_4cm VI2_24cm VI2_39cm 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Villasjön CO2 incubations at 20C μmol CO2 g-1ds day-1 Core/Sediment Depth (cm) VI1_6cm VI1_23cm VI1_38cm VI2_4cm VI2_24cm VI2_39cm 0 0.2 0.4 0.6 0.8 1 1.2 1.4 Villasjön CO2 incubations at 5C μmol CO2 g-1ds day-1 Core/Sediment Depth (cm) Results Conclusions and Future Work • Villasjön cores indicate that CH 4 production rates were highest at the same sediment depths as peak dissolved CH 4 concentrations, with maximum values between depths of approximately 10cm and 30cm (Figures 5,6,8 & 9). • CH 4 production was highest in areas of Villasjön known to have the highest rates of CH 4 ebullition. • CO 2 production was highest in surface sediments ranging from about 4cm to 11cm in depth, with rates displaying a steady decrease below 11cm (Figures 2 & 3). • CO 2 production correlated with total organic carbon (TOC) concentrations with respect to sediment depth. (Figures 2-4 & 7). • Future isotopic analysis of sediment & headspace samples will help determine if the ages between sampled CH 4 and sediment match or differ. Older CH 4 would indicate production may be occurring at depths below what we have sampled. 0 20 40 60 80 100 0 5 10 15 20 25 30 35 40 45 CH4 Concentrations in Villasjon, VM Transect VM1 VM2 VM3 VM4 VM5 VM6 VM4* μg CH4 g-1ds Sediment Depth (cm) 0 10 20 30 40 50 60 70 80 90 0 10 20 30 40 50 60 70 80 CH4 Concentrations in Villasjon, VP Transect VP1 VP2 VP3 VP4 VP5 VP6 μg CH4 g-1ds Sediment Depth (cm) Figure 2: CO 2 flux rates for samples taken at eastern & western most points of transect VM. Samples taken from Villasjön. Figure 3: CO 2 flux rates for samples taken at eastern & western most points of transect VM. Samples taken from Villasjön. Figure 5: CO 2 flux rates for samples taken at eastern & western most points of transect VM. Samples taken from Villasjön. Figure 6: CO 2 flux rates for samples taken at eastern & western most points of transect VM. Samples taken from Villasjön. Figure 9: CH 4 concentrations vs. sediment depth along VM transect. Samples taken from Villasjön. Figure 8: CH 4 concentrations vs. sediment depth along VP transect. Samples taken from Villasjön. Inre Harrsjön & Mellan Harrsjön (Sites MD1, MS1, ID1 & IS1): • 2 sets of samples were taken from each lake; Inre Harrsjön (IS1 &ID1) & Mellan Harrsjön (MS1 & MD1). Each sample set consisted of 4 individual sediment cores: - The first core was sub-sampled for CH 4 incubation . Duplicate 2 cm 3 sub-samples from this core were taken at surface, middle and maximum sediment depths. - The second core was sub-sampled for bulk CH 4 concentration in increments of 5cm along the length of the core. Samples were stored in sealed 30mL vials. 0 50 100 150 200 250 300 350 0 10 20 30 40 50 60 70 80 Inre Harrsjön & Mellan Harrsjön CH4 Concentrations Inre Deep Inre Shallow Mellan Deep Mellan Shallow μg CH4 g-1ds Sediment Depth (cm) Figure 10: CH 4 concentrations per sediment depth from cores ID1, IS1, MD1 &MS1. Samples taken from Inre Harrsjön & Mellan Harrsjön. TOC Content vs. Sediment Depth in Villasjön -1 -0.5 0 0.5 1 1.5 2 2.5 3 0 5 10 15 20 25 30 35 40 f(x) = 14.5780892203254 x + 4.70517263347856 R² = 0.542648376968157 Villasjön CO2 Production vs. TOC 20C 5C Linear (5C) μmol CO2 g-1ds day-1 TOC Weight % Figure 4: CO 2 vs. TOC weight % from samples taken from cores VI1 and VI2. Samples taken from Villasjön. Figure 7: Total organic carbon (TOC) content for VM & VP transect core samples. Samples taken from Villasjön. Research site: Figure 1 (Right): Stordalen Mire complex. The 2 uppermost lakes are Inre Harrsjön and Mellan Harrsjön. Villasjön is the largest of the three lakes, located at the bottom right. The marked points indicate where each sample core set was taken. Photo courtesy of Google Maps, 2013 Acknowledgements Special thanks to Mr. Dana Hamel, Dr. and Mrs. Arthur G. Rand, Georgeann Murphy, Peter Akerman, ANS and the Northern Ecosystems Research for Undergraduates program (NSF REU site EAR#1063037) for making this project possible. Additional thanks to my research mentors, Dr. Ruth Varner and Dr. Joel Johnson - The third core was sub-sampled for bulk total organic carbon (TOC), carbon, sulfur and nitrogen concentrations in increments of cm along the length of the core. - The fourth core was sub-sampled every 5cm using Rhizons to extract pore water samples for dissolved inorganic carbon (DIC) content. Villasjön (VM Transect): Methods • Cores were taken along 2 perpendicular transects within Villasjön: VM & VP. 2 sediment cores were taken at each sample site in Villasjön. Cores were sampled for CH 4 concentrations, TOC, S, N & C. Additional sediment cores were also taken from each end of the VM1 transect (VI1 and VI2) for CO2 and CH4 production rate analysis. Villasjön Mellan Harrsjön Inre Harrsjön Photo: Ruth Varner