Building of fiber optic networks on motorways and express roads Process Dry sawing with suction and simultaneous collection of the excavated material Simultaneous mechanical laying of a fiber optic cable and a protection seal Filling with a hot applied slurry seal Specific features Easily usable road vehicle Sound-proofing of the components Excavated material loaded by suction No material nor dust thrown out during earth works Quick network deployment process Assets Cleanliness of the groove and job site Vehicle traffic not interrupted during the works Limited disturbance to residents Increased safety of the work site Preservation of the road foundations Quick restoration of the highway Reduction in building costs Innovation Combined sawing and suction of the excavated material Output Up to 2,500 lm/day on a motorway Performance of grooves for the deployment of optic networks on motorways and express roads MARAIS GROUPE Météor
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Building of fiber optic networkson motorways and express roads
Process Dry sawing with suction and simultaneous collection of the excavated material
Simultaneous mechanical laying of a fiber optic cable and a protection seal
Filling with a hot applied slurry seal
Specific features Easily usable road vehicle
Sound-proofing of the components
Excavated material loaded by suction
No material nor dust thrown out during earth works
Quick network deployment process
Assets Cleanliness of the groove and job site
Vehicle traffic not interrupted during the works
Limited disturbance to residents
Increased safety of the work site
Preservation of the road foundations
Quick restoration of the highway
Reduction in building costs
Innovation Combined sawing and suction of the excavated material
Output Up to 2,500 lm/day on a motorway
Performance of grooves for the deployment of opticnetworks on motorways and express roads
MARA I SGROU P E
Météor
Features of the sawing tool Type : axially driven dry sawing disc
Sawing width : 10 mm
Sawing depth : up to 100 mm
Side offset of the tool outside the machine : 250 mm opposite side from driving seat (right or left)
Sizes and weight of the unit Length in working position : 11 m
Length in transport position : 9 m
Width : 2.50 m
Height : 3.60 m
Unloaded weight : 20 tons
Loaded weight : 26 tons
Excavated material loading capacity of the bucket : 6 m3 abounded
Unloading height of the bucket : 1.50 m
Height of the bucket in lifted position : 5.50 m
Technical diagram
MÉT
ÉOR
_EN
G _
03/1
2 -
Spec
ifica
tions
as
show
n ar
e no
t bin
ding
to th
e m
anuf
actu
rer
and
may
be
chan
ged
with
out p
rior
not
ice.
The
equ
ipm
ent o
ffer
ed in
this
leafl
et c
an in
clud
e op
tiona
l fitt
ings
and
dev
ices
.
www.samarais.com
MARA I SGROU P E ZA Les Portes de l’Anjou
1, rue Pierre et Marie CURIE BP 20 - 49430 DURTAL (France)