This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
open mouth capsule), high feed rate-72 OC (Lt. Blue): Encapsulated solid (use open mouth capsule)-52 OC (Red): “Tall Bottle” solid (use open mouth)
Nozzle Replacement (Detailed Instructions on Page 4)1. Turn off electrical power and water supply.2. Depress retaining arm and remove screen.3. Continue to depress retaining arm (or remove metal safety spring)
to access nozzle.4. With 3/8" socket driver or nut driver, remove and reinstall nozzles.
Do not overtighten.5. (If removed, replace safety spring) and snap screen firmly in place.
Retaining ArmNozzle(Metal safety spring retracted)
1. TURN OFF ELECTRICALPOWER AND WATERSUPPLY (while metalsafety spring is stillcovering nozzle).
2. Depress retaining arm toretract metal safetyspring.Use hook tool to detachand remove screen.
3. Insert hook tool nearsafety spring andbegin lifting screen.
4. Continue lifting screenat each rib locationuntil screen is no longersnapped under ribs.
5. Slide screen off ofsafety spring and setscreen aside.
6. Continue to depressretaining arm to accessnozzle (or removemetal safety spring).
7. Use 3/8”socket driver(or nut driver)to removeold nozzle.
8. Lift out old nozzle andscrew in new nozzle.Use 3/8” socket driver(or nut driver) totighten new nozzle.Do not overtighten.
9. With new nozzlesecurely in place,locate slot onunderside of screen.blank line(If metal safetyspring was removed,replace it now.)
10. Using hook tool, slidescreen onto the metalsafety spring, thensnap screenunder ribs.blank lineIMPORTANT:Secure screenunder each rib bypressing firmly withfingers until screensnaps into place.
11. Release retainingarm. Metal safetyspring slides backinto place and coversnew nozzle.