Metal Roofing - Construction Metals Inc. · PDF fileMetal Roofing has the Lowest Maintenance and ... UL Class A Fire Rating Impact Resistant. UL 2218. Does not ... from the impurities

Construction Metals Inc. 10302 Birtcher Dr., Jurupa Valley, CA 91752 • 800-576-9810 • Fax: 909-390-9877 • constructionmetals.com

Metal Roofing

ContentsFeatures & Benefits ................................2

Profile Selector .......................................3

Colors ........................................................4

Warranty ...................................................5

Flashing & Trim Details ..........................6

Corrugated ...............................................8

SM-Rib ......................................................9

PBR & R .................................................. 10

Snap-Lock ................................................11

Accessories .............................................12

Detailed Profiles .....................................13

Fastener Placement ............................. 14

Helpful Hints ...........................................15

Critical Storage Information ................16


2

Features and BenefitsGibraltar Metal Roofing delivers style, strength and lasting value to residential, commercial and agricultural roofing. Every panel and trim component is manufactured to the highest Gibraltar standards and backed by our dedication to service.

Gibraltar has a proud tradition of working with both professional contractors and do-it-yourselfers.

Metal Roofing has the Lowest Maintenance and Lifetime Roof Cost

2 to 3 times longer life than traditional composition roofs

150+ MPH High Wind Rating: Miami-Dade, UL

Class A Fire Rating

Impact Resistant. UL 2218.

Does not promote the growth of algae, mildew or toxic mold

Environmentally friendly, 100% recyclable material. Gibraltar Metal Roofing panels are produced with 60% to 65% recycled steel.

Energy Efficient: Up to 20% savings on heating and cooling, even more when you choose our new Energy Star® certified colors.

Can be installed over existing shingles, eliminating significant tear-off and disposal costs.

Available in styles and contemporary colors to complement any architectural style.

Gibraltar Metal Roofing Panels and Trim have sharp edges. Always wear protective clothing and gloves.

Do not store metal roofing in an area where moisture can accumulate. Bundled metal roofing must be covered with a breatheable tarp (do not use plastic) and stored on a slant to permit drainage. Metal roofing must be stored properly in transit or on the job site. To avoid rust stains, remove metal shavings/particles after drilling.

Failure to comply with these storage procedures relieves the manufacturer of responsibility for any resultant damage to, or deterioration of, the product and voids all warranties. There is no implied warranty of merchant-ability or fitness for purpose.


3

PBR & R PANEL

SM_RIB

Profile Selector Typical Applications: Architectural, Residential, Light Commercial/Industrial Post-Frame Buildings, Garages, Porches, Gazebos. Retrofit over existing roof.

21 1/2 in. Coverage

2 1/2 inch Corrugated Finish/Substrate Gauge Warranty Certifications & Testing

Galvanized 29 - UL 790 Fire Resistance Class A

Painted/Galvanized 26 50 Year

Galvalume® 26, 29 25 Year UL 2218 Impact Resistance Class 4 UL 580 Uplift UL Class 90

Metro Dade: PA 100 Wind Driven Rain Infiltration Metro Dade: PA 114 Static Air Press Pos/Neg Resistance Acceptance No. 07-8924.07

Florida Building Code: FL-9761-1

Painted/Galval-ume®

26, 29 50 Year

36 in. Coverage

PBR

36 in. Coverage

Galvalume® 29 25 Year UL 790 Fire Resistance Class A UL 2218 Impact Resistance Class 4 UL 580 Uplift UL Class 90

Painted/Galvalume® 26, 29 50 Year

Snap-Lock Standing Seam Painted/Galvalume® 26 50 Year

12 in. Coverage

The lower the gauge number, the thicker the metal. 29 gauge is the minimum thickness recommended for residential applications.

CORRUGATED

SM-Rib

SEM_LOK


4

Energy Star® qualified roof products reflect more of the suns rays. This can lower roof surface temperatures by up to 100° F, decresing the amount of heat transferred into a building, helping to reduce peak cooling demand by 10-15%

Available Colors ENERGY STAR® QUALIFIED

Snap-Lock: 12 inch Standing Seam panels. 26 Gauge.

Colors samples printers' representations. For more precise color matching request a metal color sample.

Corrugated: 29 Gauge unless otherwise noted.

Galvanized CW:Cotton White TAN:Tan

SM-Rib: 36 inch panels. 26 & 29 Gauge.

CW: Cotton White BZ: Bronze BE: Raffia Beige CL: Clay DG: Dove Gray AI: Antique Ivory BDW: Brandywine

RBL: Regal Blue RBR: Royal Brown TC: Terra Cotta FG: Forest Green BL: Blue CG: Charcoal Gray LG: Leafy Green

RD: Bright Red SC: Simulated Copper

PBR: 36 inch panels. Roofing: 26 Gauge; Siding: 29 Gauge.




TC: Terra Cotta


FG: Forest Green BL: Blue CG: Charcoal Gray


5

Warranties Metal Roofing Finish Warranties: What is covered?

GALVANIZED - Steel substrate coated with molten zinc in a hot bath dip action providing a coating thick-ness of .90 ounces of zinc (G90) per square foot of panel top and bottom.

Warranty - NONE

Coverage - NONE

Properties - Galvanized coating is roughly 98% zinc with a small amount of silicon to promote proper flow. The shade and spangle (patchy appearance of the coating) are due to impurities in the zinc and can vary. Zinc coating is a sacrificial weak metal coating that will sacrifice itself to protect the noble metal (in this case steel) from galvanic chemical reaction accelerated by moisture from humidity, condensation, rain, and snow.

25 YEAR GALVALUME - Steel substrate coated with a molten hot dip action providing a coating thickness of .55 ounces of zinc/aluminum (AZ55) per square foot of panel top and bottom.

Warranty - 25 year limited warranty, pro-rated from year 1, non-transferable, must be installed within the continental US.

Coverage - for a period of 25 years the panel will not perforate due to red rust provided the project the mate-rial is installed on meets the limitations of a minimum slope of 3:12 or greater, not used for animal confine-ment, is installed within the contiguous United States, and is not within 1/2 mile of an aggressive environment such as, but not limited to, salt water. Due to the characteristics of the metallic coating, cosmetics cannot be controlled and are not covered by the limited warranty. This metallic coating can and will weather non-uniformly. Galvalume coating was developed as a functional finish for projects where aesthetics are not a major concern.

Properties - Galvalume is a mixture of roughly 45% zinc and 55% aluminum with a small amount of silicon to promote an even flow over the substrate. This coating also derives its shade, size, and pattern of spangle from the impurities in the elements of the molten hot dip bath.

50 YEAR PAINTED - Galvalume or steel substrate coated with zinc then finished with a silicone polyester paint system consisting of a primer coat top and bottom and the primary color applied to the top of the panel.

Warranty - 50 year limited warranty, pro-rated from year 1, non-transferable, must be installed within the continental US.

Coverage - Paint peel, check, chip, or crack resulting from a manufacturers defect for a period of 40 years from the date of invoice providing the project the material is installed on meets the limitations of a minimum slope of 3:12 or greater, not used for animal confinement, is installed within the contiguous United States, and is not within 1000 feet of an aggressive environment such as, but not limited to, salt water. Excessive chalk and fade is covered for the first 10 years (note: chalk and fade occur normally as the binders and pig-ments of the paint system break down, fade is expected to be uniform with equal exposure to the sun).


6

Flashing & Trim Details

EF-1 Gable Flashing

Snap-Lock,Post Frame SM-Rib

PAINTED

EF-3 Eave Flashing

SM-Rib, PBR,Snap-Lock

PAINTED

BD-1 Base Drip

SM-Rib,Snap-Lock

PAINTED

7⁄8

BD-2 Base Drip: 2 inch

PBR

PAINTED

1⁄2

CL-1 Cleat

PAINTED

Snap-Lock

CL-2 Cleat Offset

PAINTED

Snap-Lock

CF-1 Counter Flashing

PAINTED

Snap-Lock

DA-1 Double Angle

SM-Rib

PAINTED

DA-2 Double Angle

PBR

PAINTED

DC-2 Drip Cap

PBR

PAINTED

DC-1 Drip Cap

Corrugated,SM-Rib

PAINTED

EW-1 Endwall Flashing

Corrugated,PBR, SM-Rib

PAINTED

VARIES

EF-5 Eave Flashing

PAINTEDVARIES

Snap-Lock

PAINTED

GR-2 Gable Rake & Corner

Corrugated, SM-Rib

GR-5 Rake Flashing

PBR

1

11

GF-1 Gambrel Flashing

VARIES

PAINTED

Snap-Lock, SM-Rib, PBR

GR-7 Gable Rake

PBR

GR-6 PBR Rake & Corner

PBR SM-Rib, PBR

IS-1 Inside Corner

PAINTED

HS-2 Highside Eave

VARIESPAINTED

Snap-Lock

115⁄16

7⁄16

11⁄4

11⁄4

13⁄4

2

1⁄25⁄8

13⁄8

1⁄23⁄4

3⁄4

11⁄2

1⁄2

11⁄2

1⁄211⁄2

115⁄16

7⁄811⁄4

7⁄16

21⁄2

11⁄411⁄4

1⁄2

29⁄16

7⁄87⁄16

5⁄8

23⁄16

11⁄41⁄2

5⁄8

11⁄16

3⁄4 23⁄4

3

5⁄8

33⁄4

2

5⁄87⁄16

33⁄8

21⁄2

5⁄8 1⁄2

43⁄16

41⁄2

71⁄4

6

3⁄8

11⁄16

11⁄16

411⁄16

3⁄8

45⁄8 511⁄16

31⁄2

31⁄21⁄2

1⁄2

15⁄84

4

15⁄8

3⁄87⁄8

5⁄83⁄8

15⁄827⁄16

31⁄8 3⁄8

37⁄8

37⁄8

5⁄81⁄2

5⁄8 15⁄8

41⁄8

41⁄85⁄8

15⁄81⁄2

Specify angle when ordering.





7

Flashing & Trim Details

RC-8 Vented Ridge Cap

Corrugated, Snap-Lock, SM-Rib

PAINTED

VARIES

JC-6 J-Channel

Corrugated, SM-Rib

JC-7 J-Channel

PAINTED

Snap-Lock

PC-1, 2, 3, 4 Post Cover

Corrugated, SM-Rib, PBR

PAINTED

PV-1 Preformed Valley

Corrugated, Snap-Lock

PV-2 (8 3⁄4 in. arms, 15/32 in. Hems)

PAINTED

PC-1 Shown

SM-Rib, PBR

RC-2 Flat Ridge Cap

VARIES

PAINTED

SW-1 Sidewall Flashing

Corrugated, Snap-Lock, SM-Rib

PAINTED

SW-2 Sidewall Flashing

PBR

PAINTED

ZC-1 Z-Closure

11

1

Snap-Lock

TC-1 Track Cover

SM-Rib, PBR

PAINTED

TF-1 Transition Flashing

Corrugated, Snap-Lock, SM-Rib, PBR

PAINTEDVARIES

RC-8

3 in.Max.

Batten

Closure Strip

VRBP

JC-6Deck

Panel

RC-8

3 in.Max.

Batten

Closure Strip

VRBP

JC-1Deck

Panel

RC-8

3 in.Max.

Deck

VRBP

JC-7

ZC-1

PopRivet

Panel

Sealant

SSW-1 Shingle Sidewall

PAINTED

PAINTED

CRC10GTape Sealant Required

Purlin3 3/4 in.

Max.

JC-1 J-Channel

PBR

PAINTED

39⁄16

11⁄2

5⁄813⁄1613⁄16

5⁄8

31⁄2

7⁄8

41⁄2

1⁄21

1

31⁄2

11⁄215⁄16

15⁄16

97⁄32

1

7⁄8

41⁄8

13⁄81⁄2

55⁄8

13⁄16

3

1⁄2

35⁄16

33⁄8

31⁄211⁄16

1⁄23⁄4

57⁄8

515⁄8

1⁄23⁄4

41⁄821⁄2

15⁄8 5

3⁄8

71⁄4

6

VRBP Vented Ridge Snap-LockVented Ridge Corrugated, SM-Rib

Vented Ridge PBR CRC10G Corrugated Ridge Cap


Specify pitch when ordering.Specify pitch when ordering.


8

Corrugated Prices are for panels 3 ft. – 25 ft., cut to the inch.

Model Description2 1/2 inch Corrugated

21 1/2 in. Coverage

CR-GALVANIZED Galvanized, 29 Gauge

CR-GALVANIZED-26 Galvanized, 26 Gauge

CR-[Color Code]-26 50 Year Painted Galvanized, 26 Gauge

FLASHING & TRIM 1 2

6 5 4 3

AVAILABLE COLORS

Galvanized CW:Cotton White TAN:Tan

Colors samples are printers' representations. For more precise color matching request a metal color sample.

1 PV-1 Preformed Valley - No Hem

2 RC-2 Ridge Cap Residential

2 CRC10G Corrugated Ridge Cap

3 SW-1 Sidewall Flashing

4 TF-1 Transition Flashing

5 EW-1 Endwall Flashing

6 EF-3 Eave Flashing

Model Description

CORRUGATED


9

SM-Rib

36 in. Coverage

Architectural exposed fastener panel. 9 in., on center, spacing major ribs with equally spaced stiffening ribs. 3/4 in. major rib height. Minimum Slope is 3:12.

Typical Applications: Architectural, Residen-tial, Light Commercial/Industrial, Post-Frame Buildings, Garages, Porches, Gazebos. Retro-fit over existing roof.

Model Description

SM-GALVALUME 25 Year Galvalume, 29 Gauge

SM-GALVALUME-26 25 Year Galvalume, 26 Gauge

SM-[color code] 50 Year Painted Galvalume, 29 Gauge

SM-[color code] 50 Year Painted Galvalume, 26 Gauge

AVAILABLE COLORS. 29 and 26 Gauge unless otherwise noted. ENERGY STAR® QUALIFIED

FLASHING & TRIM

21 3

5

6

4

13

7891011

12





SM_RIB

Prices are for panels 3 ft. – 25 ft., cut to the inch.


10

SM-Rib FLASHING & TRIM

Model Description

1 RC-2 Ridge Cap

1 RC-8 Ridge Cap (for use with ridge vent)

2 PV-1 Preformed Valley

3 GR-2 Gable Rake & Corner (for use with metal siding)

3 JC-6 J Channel Ridge Vent

4 DC-1 Drip Cap (for use with metal siding)



7 GF-1 Gambrel Flashing



10 IS-1 Inside Corner (for use with metal siding)

BD-1 Base Drip (for use with metal siding)

EF-1 Gable Flashing

13 DA-1 Double Angle (for use with metal siding)

TC-1 Track Cover Universal

PC-1 Post Cover 2 x 4




HS-2 High Side Eave (for single slope roof)

Lineal Trims and Flashings are sold in 10 foot lengths unless otherwise specified.See pages 7 & 8 for detailed drawings of Flashing & Trim. • See page 16 for fasteners, closure strips and accessories pricing.


11

PBR

36 in. Coverage

Model Description

Architectural exposed fastener panel. 12 in., on center, spacing major ribs with equally spaced stiffening ribs. 1 1/8 in. major rib height. Minimum Slope is 1:12.

Typical Applications: Architectural, Residen-tial, Light Commercial/Industrial, Post-Frame Buildings, Garages, Porches, Gazebos. Retro-fit over existing roof.

AVAILABLE COLORS. Roofing: 26 Gauge, Siding: 29 Gauge ENERGY STAR® QUALIFIED

1 2 3 4

6

7

8910111213

14

155

FLASHING & TRIM

PBR-GALVALUME 25 Year Galvalume, 29 Gauge - PBR

PBR-GALVALUME-26 25 Year Galvalume, 26 Gauge - PBR

PBR-[color code] 50 Year Painted Galvalume, 29 Gauge - PBR

PBR-[color code]-26 50 Year Painted Galvalume, 26 Gauge - PBR





PBR & R PANEL



12

PBR FLASHING & TRIM

Model Description


1 RC-2 Ridge Cap



4 JC-1 J Channel

4 RC-8 Ridge Cap (for use with ridge vent)




8 TC-1 Track Cover Universal

9 GR-5 Gable Rake

9 GR-6 Gable Rake & Corner

9 GR-7 Gable Rake

10 DC-2 Drip Cap

BD-2 Base Drip

IS-1 Inside Corner

13 PC-1 Post Cover 2 x 4





15 DA-2 Double Angle



13

Snap Lock

12 in. Coverage

Architectural concealed fastener standing seam panel. 1 inch seam height. Hemmed snap lock design. Minimum Slope is 2:12.

Typical Applications: Architectural, Residential, Light Commercial/Industrial, Post-Frame Buildings, Garages, Porches, Gazebos. Retrofit over existing roof.

Model Description

SNLK-[color code]-26 50 Year Painted Galvalume, 26 Gauge

AVAILABLE COLORS ENERGY STAR® QUALIFIED

2 3

4

8

6

5

1

7

FLASHING & TRIM

TC: Terra Cotta


FG: Forest Green BL: Blue CG: Charcoal Gray

SEM_LOK




14

FLASHING & TRIM PRICINGSnap LockModel Description


1 CL-2 Cleat

2 RC-8 Ridge Cap

2 JC-7 J-Channel


3 EF-1 Gable Flashing


4 CL-1 Cleat




7 CF-1 Counter Flashing

8 SSW-1 Sidewall Flashing


ZC-1 Z Closure


* Z-Closure is used at locations: 1, 3, 4, 6, 7, 8



15

Fasteners, Closure Strips & Accessories Pricing

Model Description

#10 x 1.5 in. Woodfast

Screw

#10 x 2.5 in. Woodfast

Screw

#12 x 1 in.Metalfast

Screw

#10-12 x 1 in.Pancake

Head

2.5 in. Corrugated Closure Strip

SM-Rib Inside Closure Strip (Eave)

SM-Rib Outside Closure Strip (Ridge)

Universal Closure Strip

SCWG1 #10-1 in. Woodfast Screw, Galvanized - 250/bag

SCW**1 #10-1 in. Woodfast Screw, Painted - 250/bag

SCWG1.5 #10-1.5 in. Woodfast Screw, Galvanized - 250/bag

SCWG2.5 #10-2.5 in. Woodfast Screw, Galvanized - 250/bag

SCW**1.5 #10-1.5 in. Woodfast Screw, Painted - 250/bag

SCW**2.5 #10-2.5 in. Woodfast Screw, Painted - 250/bag

SCMG1 #12-1 in. Metalfast Screw, Galvanized - 250/bag

SCM**1 #12-1 in. Metalfast Screw, Painted - 250/bag

SCTKG #12-14 Zac Screw, Galvalume - 250/bag

SCTK** #12-14 Zac Screw, Painted - 250/bag

SCPKG #10-12 Pancake Head, Galvanized - 250/bag

CLS24 2 1/2 in. Corrugated Foam Closure Strip

PCCLSIN SM-Rib Foam Inside Closure Strip

PCCLS SM-Rib Foam Outside Closure Strip

PBRCLSIN-EA PBR Foam Inside Closure Strip

PBRCLSOUT-EA PBR Foam Outside Closure Strip

CLSUNIVROLL Universal Foam Closure 1 in. x 1 1/2 in. x 25 ft.

SM-Rib Transluscent Panel

PBR Transluscent Panel

Pipe Flash

Butyl Tape Touch Up Paint

SM-CLEAR-8 SM-Rib Clear Sunsky Panel 8 ft. (8 oz.)

PBR-CLEAR-8 PBR Clear Sunsky Panel 8 ft. (8 oz.)

PB-3 Pipe Flash 1/4 in. to 4 in.

PB-5 Pipe Flash 4 in. to 7 in.

BT-45 Butyl Sealant Tape 3/32 in. x 1/2 in. x 45 ft.

TP[color] Touch-Up Paint - Pint

UV-1 1 in. Uni-Vent - 20 ft.

UV-125 1 1/4 in. Uni-Vent - 25 ft.

UVC-1 1 in. Uni-Vent Clip

1 in.

#12-14 ZAC ScrewMetal-to-Metal

Application


16

Metal Roofing ProfilesCorrugated

25 3/4 in. Overall (24 in. Siding Coverage: 21 1/2 Roofing Coverage)

2 2/3 in. 1/2 in.

36 in. Coverage

3/4 in.

9 in. 3 1/8 in. 3 1/8 in.2 3/4 in.

SM Rib

PBR36 in. Coverage

12 in. Pitch

1 1/8 in.

45°

7/16 in.1.34 in.

2.06 in.7/8 in.3/16 in.

1 9/16 in.

Snap-Lock12 in. Coverage

1 in.

4 in. 4 in. 4 in.

3/4 in.

3/4 in.Depth: 1/32 in.


17

Fastener PlacementCorrugated

For all intermediate purlins or plywood.

For eaves, ridges and valleys.

21 1/2 in. CoverageSidelap Detail for Roofing

24 in. CoverageSidelap Detail for Siding

Minimum Pitch 3/12Nominal Coverage (± 1/8 in.)

For eaves, ridges and endlaps.

SM Rib

For all intermediate purlins or plywood.

Anti-Siphon Channel Prevailing

Wind

Minimum Pitch 3/12Nominal Coverage: 36 in. (± 1/8 in.)

PBR

For eaves, valleys and endlaps.

Prevailing Wind

Minimum Pitch 1/12Nominal Coverage: 36 in. (± 1/8 in.)

For all intermediate locations.

Sealant(roofing applications between 1/12 and 3/12)


18

Helpful HintsCAUTION: Gibraltar Metal Roofing Panels have sharp edges. Always wear protective clothing and gloves.

Do not store metal roofing in an area where moisture can accumulate. Bundled metal roofing must be covered with a breatheable tarp (do not use plastic) and stored on a slant to permit drainage. Metal roofing must be stored properly in transit or on the job site.

To avoid rust stains, remove metal shavings/particles after drilling.

Failure to comply with these storage procedures relieves the manufacturer of responsibility for any resultant damage to, or deterio-ration of, the product and voids all warranties. There is no implied warranty of merchantability or fitness for purpose.

Calculating Lineal Footage Multiply the length of the pieces by the number Example: 10 pieces of 10 foot lengths: 10 x 10 = 100 L.F. (Lineal Feet) 10 pieces of 10 ft. 2 in. lengths: 10 x 10.167 = 101.67 L.F. (Lineal Feet)

Inches to Decimal Fraction of a Foot

Multiply by Run to get Length

LF of Hips or Valleys per LF of Common RunPitch Angle

RUN

RIS

E

Calculating Pitch & Material Requirements

1 in. 2 in. 3 in. 4 in. 5 in. 6 in. 7 in. 8 in. 9 in. 10 in. 11 in. 12 in.

.083 .167 .250 .333 .417 .500 .583 .677 .750 .833 .917 1.000

Calculating Squares Multiply the Lineal Footage by the panel conversion factor. Corrugated .02 Example: 100 L.F. x .02 = 2 Squares SM-Rib .03 Example: 100 L.F. x .03 = 3 Squares PBR .03 Example: 100 L.F. x .03 = 3 Squares SemLok .0133 Example: 100 L.F. x .0133 = 1.33 Squares

Fastening schedules change per region. Please check your local building codes.

Estimating FastenersSquares x 100, round up to nearest bag countSquares x 100Squares x 100Squares x 100Squares x 125


19

Metal Roof Panel Handling & Storage Critical Warranty Information*

Store off the ground, inside in a well ventilated, dry location. Block the pallet on an angle to permit drainage.

For temporary outside storage, block pallet on a angle to permit drainage and cover with a breatheable tarp (do not use plastic).

Failure to comply with these storage procedures relieves the manufacturer of responsibility for any resultant damage to, or deterioration of, the product and voids all warranties. There is no implied warranty of merchantability or fitness for purpose.

Contact between metal panels and any corrosive materials or dissimilar metals should be prevented.

CAUTION! Sharp edges! Use gloves to prevent injury.

This product is not recommended for direct contact with treated lumber.

Remove metal shavings after drilling or cutting, to avoid rust stains.

Cuts to panels or trims should be done with “scissor” cutting tools. Do not use a panel saw for cuts.

Do not write (with pencil, pen, marker, crayon, etc.) directly onto Metal Roofing Panels or Trims.

ATTENTION

GIBRALTAR BUILDING PRODUCTS

Metal Roofing - Construction Metals Inc. · PDF fileMetal Roofing has the Lowest Maintenance and ... UL Class A Fire Rating Impact Resistant. UL 2218. Does not ... from the impurities

Documents