Metal & X-Ray Detectable Plastics Ü Scraper blades Ü Mixer components Ü Rollers Ü Wear-strips Ü Bushings Ü Bearings Ü Guides Ü Sprockets Ü Agitators Ü Pharmaceutical packaging Ü Pillow blocks Ü Gears Innovations for the food processing industry! Suggested use with the following food products include: Ü frozen & prepared foods Ü soup and chili Ü snack foods Ü chips and tortillas Ü cereals Ü cheese Ü ice cream Ü candies and chocolates Ü pastries Ü pet food Röchling Engineering Plastics 903 Gastonia Technology Parkway Dallas, NC 28034, USA Phone: 704-922-7814 Fax: 704-922-7651 [email protected] www.roechling-plastics.us www.roechling-plastics.us Röchling Engineering Plastics is proud to offer detectable plastics in UHMW, Acetal and PEEK machinable stock shapes. These materials are specifically manufactured to be visible to X-ray and metal detection technology. Food processing, medical, and packaging companies can now comply with FDA and industry specific regulations. 3 The materials can be detected in sizes as small as 3 mm , allowing for focus on prevention of contamination. Metal Detectable Plastics: ® Polystone M MDT (UHMW-PE) ® SUSTARIN C MDT(Acetal) X-ray Detectable Plastics: ® Polystone M XDT (UHMW-PE) ® SUSTARIN C XDT (Acetal) ® SUSTAPEEK XDT (PEEK) Metal detectable machined part X-ray detectable machined part ® Polystone M XDT (UHMW-PE) ® SUSTARIN C XDT (Acetal) Image of an X-rayed chicken brest MDT & XDT Applications