Metal and Steel Building Insulation

Published By: www.insulationstop.com

Metal and Steel BuildingMetal and Steel BuildingInfraStop® InsulationInfraStop® Insulation

Call Us : 800­871­0410

Published By: www.insulationstop.com

InfraStop® Metal BuildingInfraStop® Metal Building

Retrofit Metal Roof: R-11 Down / R-4.4 Up

New Metal Wall (Thermal Break): R-6.8 to R-5.6

Published By: www.insulationstop.com

New Metal Wall (No Thermal Break): R-5.9 to R-4.7

Retrofit Metal Wall: R-4.5

Published By: www.insulationstop.com

New Metal Roof (Thermal Break): R-9.2 Down / R-4.1 Up

New Metal Roof (No Thermal Break): R-7.6 Down / R-3.9 Up

Published By: www.insulationstop.com

Installation Instructions:Installation Instructions:

1. Open Interior with 3/4" Thermal Breaks : After the red metal is erected, install the Tempshield™ Reflective/Bubble/Bubble/Reflective product over the purlins by using 1/2” self-taping metal screws and screwing the product to the purlins. Tape the seams with a Tempshield™ Foil Tape (goal is an air-tight, snug seam seal). Install at least a 3/4” thermal break. If installing a standing seam roof, use clips with thermal breaks. Install roofing either by screwing corrugated metal screws through the thermal break and insulation to the purlin or install a standing seam roof. If an interior finish is to be installed, attach to the bottom of the purlins. This will create a 3/4” air space between the roofing and the insulation and an 8” air space between the insulation and the interior finish.

2. Open Interior with 3/4" Thermal Breaks and a Nominal 3/4" Drape :Per instructions above without the thermal break.

Published By: www.insulationstop.com

48" x 100' Reflective Double Bubble Reflective48" x 125' Reflective Double Bubble Reflective72" x 125' Reflective Double Bubble Reflective

Standard Size Recommended Products:

Published By: www.insulationstop.com

60" x 50' Reflective Double Bubble Reflective60" x 100' Reflective Double Bubble Reflective72" x 50' Reflective Double Bubble Reflective72" x 100' Reflective Double Bubble Reflective84" x 50' Reflective Double Bubble Reflective84" x 100' Reflective Double Bubble Reflective96" x 50' Reflective Double Bubble Reflective96" x 100' Reflective Double Bubble Reflective108" x 50' Reflective Double Bubble Reflective108" x 100' Reflective Double Bubble Reflective120" x 50' Reflective Double Bubble Reflective120" x 100' Reflective Double Bubble Reflective

Custom Size Recommended Products:

Published By: www.insulationstop.com

BenefitsBenefits::

Easy to handle and installConvenient roll sizesClass A / Class 1 Fire RatingInhibits dew point condensationVapor retarder (0.02 perms)Does not compress, collapse or disintegrateNon-toxic / non-carcinogenic

Published By: www.insulationstop.com

Testing and Certification:Testing and Certification:

Tempshield™ products are thoroughly tested at either nationally approved independent laboratories or leading universities. Tests are  performed  to  current  American  Society  of  Testing  and Materials (ASTM) standards when a standard exists. For a copy of  an  actual  test  report,  please  e­mail  us  at [email protected].

Published By: www.insulationstop.com

Thank You....Thank You....

5 Floral CourtLatham, NY 12110 USA

Ph:  (800) 871­0410Email ID : [email protected]

Website: http://www.insulationstop.com

Contact Us