-
NATIONAL FLUID POWER CENTRE UKWEBINAR/Course Planner- Supporting
Wellbeing during COVID-19
Message from NFPC Director – John R SavageThis Course Planner
has been formulated to support the continued Education &
Trainingof your staff whilst we progressively recover from the
current restrictions of COVID-19.It provides a totally flexible
training system, keeping costs to a minimum and allows:-
Maximum Flexibility – Reduced Travel- Reduced
Hotel/Accommodation Costs and MaximumSafety Measures when
Candidates attend the NFPC for Practical Training.
The Content of these WEBINARS, are the same as the COURSES
delivered at the NFPC
WE ARE OFFERING:• Technical WEBINARS- Online using ZOOM•
Follow-on Practical Training at the NFPC • (Compliant at all
times)-Risk Assessments in place• Pay as you go, for individual
Daily Modules• Flexible Follow-on Training-Select the days and
dates to meet your needs• NO CHANGE IN COURSE CONTENTS
Use our FREE ON-LINE Self Assessment Questionnaire to check your
current KnowledgeLevels before reserving your place on any of our
courses VISIT OUR WEBSITE FOR FULL DETAILS www.nfpc.co.uk Issue
date 11 September 2020
(Issue 40B – Revised 11/9/20)
Follow-on Practical Days
to develop your Skills and Role Competency at
the NFPC
Both Webinars & Practical Training Days at the NFPC will
have limited Candidate numbers to ensure that we comply with the
Social Control elements for COVID-19. You must therefore contact
the Anne Clarke, Tel No 01909 504539 ([email protected]) and check
availability- As always we will endeavour to meet your request
-
YOUR WEBINAR & FOLLOW-ON PRACTICAL SKILLS COURSE PLANNERThis
is how it works- every WEEK, we will offer a series of KEY COURSES
and you can select the course that best meets your needs. Once you
are on a particular course and attending the first dayof Webinars,
you can be flexible in selecting the dates to continue and finish
the total course.
TYPICAL EXAMPLES SHOWN: - Progression Route
Course Title Mon Tue Wed Thu Fri
Stage 1 Hydraulics3 day course(BFPA-MERs)
MODULE 1Webinar Day 1
Knowledge Based
MODULE 2Webinar Day 2
Knowledge Based
MODULE 3Practical Training
Day at NFPC
MODULE 3Practical Training
Day at NFPC ADDITIONAL DAY BEING OFFERED
Stage 2 Industrial Hydraulics
4 day course
MODULE 1Webinar Day 1
Knowledge Based
MODULE 2Webinar Day 2
Knowledge Based
MODULE 3Practical Training
Day at NFPC
MODULE 4Practical Training
Day at NFPC
Stage 1 Hydraulics
Stage 2 Industrial Hydraulics
Stage 1 Courses meeting the BFPA Minimum Educational
Recommendations - will be offered every week –Stage 2 Industrial
& Mobile Hydraulics- will be offered on alternate weeks -.ONCE
YOU HAVE ATTENDED Module Day 1, you can attend the rest of the
Module Days on the specific allocated days but not necessarily
during the same week- we are offering:
“FLEXIBLE FOLLOW-ON LEARNING ,SKILLS DEVELOPMENT, PAY AS YOU
GO”
£300.00 Exc VAT/ Person/Module/Day
Standard COST for all Webinar and Practical Days
£300.00/pp/Module/dayContact us and check availability
Course Title Mon Tue Wed Thu Fri
Introduction to Hydraulics2 day course
MODULE 1Webinar Day
MODULE 2 Practical Training NFPC
MODULE 2 Practical Training NFPC
Additional Day
Stage 1 Hydraulics3 day course
MODULE 1Webinar Day 1
MODULE 2Webinar Day 2
MODULE 3Practical Training
NFPC
MODULE 3 Practical Training NFPC
Additional Day
Stage 2 Industrial Hydraulics4 day course
MODULE 1 Webinar Day 1
MODULE 2Webinar Day 2
MODULE 3Practical Training
NFPC
MODULE 4Practical Training
NFPC
Stage 2 Mobile Hydraulics4 day course
MODULE 1 Webinar Day 1
MODULE 2Webinar Day 2
MODULE 3Practical Training
NFPC
MODULE 4Practical Training
NFPC
Introduction to Pneumatics1 day course
MODULE 1 Webinar Day
Stage 1 Pneumatics3 day Course
MODULE 1Webinar Day 1
MODULE 2Webinar Day 2
MODULE 3Practical Training
NFPC
MODULE 3Practical Training NFPC
Additional Day
Introduction to Elec/Electronics1 day course
MODULE 1Webinar Day
Stage 1 Applied Elec/Electronics3 day course
MODULE 1Webinar Day 1
MODULE 2Webinar Day 2
MODULE 3 Practical Training
NFPC
MODULE 3Practical Training NFPC
Additional Day
KEY- Practical Training Days
Both Webinars & Practical Training Days at the NFPC will
have limited Candidate numbers to ensure that we comply with the
Social Control elements for COVID-19. You must therefore contact
the Anne Clarke, Tel No 01909 504539 ([email protected]) and check
availability- As always we will endeavour to meet your request
KEY- Additional Practical Training Days to choose
Every Week
Every Week
Every Week
Every Week
Every Week
Alternate Week
Every Week
Alternate Week
Other NFPC Courses and Qualifications can be made available on
special request
-
YOUR “INTERIM” COURSE PLANNER- OUR ASSURANCE TO YOUWe are
supporting the knowledge and skills development of your
workforce
We are aware of the importance of Practical Hands – On Training
to improve both Skills and Role Competency. When you attend the
NFPC, we guarantee both you and your Employer, that you will
perform within your “Place of Work” more efficiently, safer and
more effectively than before.
With your increased knowledge and skills, you will be of greater
value to your Employer. NOTHING HAS CHANGED-
Webinars will be delivered to small groups and you will have an
experience close to that of attending a Technical Lecture at the
NFPC. The Webinars will take an “open approach” whereby, you will
be able to hold a live two-way conversation with NFPC Training
Engineers throughout the Webinar delivery. You will also receive a
copy of the Course Notes by post, before you attend.Our team will
also help you to effectively receive our Webinar Sessions, ensuring
that your Computer System and Webcam are effective in receiving our
presentations via ZOOM
SO WHAT ABOUT THE PRACTICAL TRAINING AT THE NFPC?We are
extremely fortunate that we have 3 Major Technical Centres at the
NFPC and a great deal of space.During the COVID-19 constraints,
these are now signposted as ZONES, 1,2 and 3. You will be directed
in to a
ZONE on arriving at the NFPC. You will be supplied with copies
of our Risk Assessment and Method Statement plus comprehensive
joining instructions.
Under all conditions, we will follow the Governments Directives
on social distancing and whilst inside the NFPC (ZONES) you will be
a member of a small group of (4 Max)-TAKING EVERY PRECAUTION TO
ENSURE YOUR HEALTH AND SAFETY AT ALL TIMES.
For further course information and support go online at
www.nfpc.co.uk or contactour Business Development Team on
+44(0)1909 504539.
Email: Anne Clarke on [email protected]
VERY IMPORTANT MESSAGE TO ALL EMPLOYERS AND INDIVIDUALSYou will
be asked to read carefully the Risk Assessment and Method Statement
sent to you and associated joining instructionsbefore you arrive at
the NFPC. You will also be asked to complete a Risk Related
Questionnaire before entering the Reception area
NOTE- Fully aware that the NFPC offers some 25 different Courses
and Qualifications-Please contact John R Savage- NFPC Director if
you wish to discuss your training requirements beyond the range of
on-line courses currently on offer [email protected] Tel No: 01909
504709
The NFPC has “World Class”
Practical Training Facilities and
Training Engineers from UK Industry
http://www.nfpc.co.uk/mailto:[email protected]
-
Webinar Dates and TimesMaximum Group Size = 8 (on-line)
INTRODUCTION-We welcome you to attend our online TECHNICAL
WEBINARS presented by NFPC Training Engineers with a vast knowledge
and experience involved in the maintenance and management of FLUID
POWER SYTEMS.Each Module will be presented online via ZOOM and
Candidate Group numbers per session will be limited to a maximum of
8 and hosted by NFPC Training Engineers.
We plan to provide you with an experience close to that of an
actual Technical Lecture at the NFPC, allowing you to ask questions
throughout the presentations and with our small group approach and
the experience of our staff we will further increase your knowledge
and understanding of Hydraulics-
Further to this, our Webinar Co-ordinator at the NFPC will
contact you and assist you in everyway to establish ZOOM on your
home computer system, thereby ensuring that you can gain maximum
benefit from our Webinar presentations
Finally, we do advise YOU to visit the NFPC website “Home-Page”
and check out your current knowledge levels using our FOCSelf
Assessment Questionnaire.
IMPORTANT MESSAGEInvitation to the Webinar will
be 15 minutesbefore the official start time
WebinarDelivery DATES
Module 1 Planned delivery times( Note these may vary)
Module 2Practical Skills
Development at NFPC
9am - 10:30am – Break11am-12:30 – Lunch
2pm- 3:30 pm
Follow – on Day9am- 4pm
Will be availableevery Tuesday fromthe 18 August 2020
Feel free to contact our Business and Customer Liaison Team for
further details and support.Toni Davis- [email protected]
Clarke [email protected]
Cost Per Person £300.00 Exc. VatCourse Aims/Who is it for?
These WEBINAR MODULES are designed to
provide a refresher for existing technical staff,
a start point for non-technical staff and those
involved with Fluid Power at the early stage of
their working careers. They will provide a
general understanding of the use of hydraulics
and the components parts involved in the
construction of a simple system.
Knowledge gained is at a basic level and great
emphasis will be placed on safe working
practices.
These Webinar Modules will also improve
communication levels as terminology is better
understood.
• The Use of Hydraulics• Advantages of Hydraulics• Basic Rules
and Principles• Building blocks- Pumps, Valves, Actuators•
Pressure, Flow and Direction Control• Reading Basic Symbols• Oil
Contamination• The Hazards of Hydraulics• Q and A sessions spread
throughout the module
IMPORTANT MESSAGE- for you to gain maximum benefit from our
Webinars, you must ensure that your home computer system can
effectively launch ZOOM. If you are in doubt before placing your
orderfeel free to contact the NFPC. We will provide you with a
written step by step plan and support you all the way. This is the
guarantee that when you pay for these Webinar, you will gain
maximum benefit
Message from John R Savage- NFPC Director- aware that these
unprecedented time are new to us all. This initiative by the NFPC
Engineers to develop a range of Knowledge Based Webinars will
provide you with an element of Continued Development, adding
further value to you in your place of work, when you eventually
return.Additional InformationAlso aware that the NFPC, has built
its World Class reputation based on its EXTENSIVE PRACTICAL
FACILITIES used to improve both SKILLS and ROLE COMPETENCY- Not all
is lost- When the world returns to normal, you can attend the NFPC
and pay an additional FEE and we will welcome you to the Centre for
HANDS-ON PRACTICAL HYDRAULICS- see below
Webinar- Follow-on Course at NFPC at a later date- OPTIONAL
MODULE 2 1 DAY
PRACTICALTRAINING
at NFPC
MODULE 1Webinars
On-Line Modules in your home
Covering Knowledge based section
Follow-on Course= £300.00 Exc. Vat
MODULE 1 – Webinar Course Content
Module 1WEBINAR will be available
every Wednesday www.nfpc.co.uk
The NFPC has the rights to change the content of this Webinarand
the delivery dates as considered necessary by the Director
Module 2Follow-on Practical Skills
DevelopmentDay at the NFPC.
Thursday or Friday9am-4pm
IMPORTANT STEP CONTACT US.
To check availability and reserve your
Practical Day, contact,
Anne Clarke on 01909 504539
[email protected]
2 Day Course:-Module 1 (Knowledge Based Day)- on-line
Module 2 (Practical Hydraulics Day) at NFPC
Maximum Group Size = 4
IMPORTANT STEP CONTACT US.
To check availability and reserve your Webinar Days,
contact, Anne Clarke on 01909 504539
[email protected]
mailto:[email protected]:[email protected]://www.nfpc.co.uk/
-
Webinar- Dates and TimesMaximum Group Size = 8 (on-line)
INTRODUCTION-We welcome you to attend our online TECHNICAL
WEBINARS presented by NFPC Training Engineers with a vast knowledge
and experience involved in the maintenance and management of FLUID
POWER SYTEMS.Each Module will be presented online via ZOOM and
Candidate Group numbers per session will be limited to a maximum of
8 and hosted by NFPC Training Engineers.
We plan to provide you with an experience close to that of an
actual Technical Lecture at the NFPC, allowing you to ask questions
throughout the presentations and with our small group approach and
the experience of our staff we will further increase your knowledge
and understanding of Pneumatics
Further to this, our Webinar Co-ordinators at the NFPC will
contact you and assist you in everyway to establish ZOOM on your
home computer system, thereby ensuring that you can gain maximum
benefit from our Webinar presentations
Finally, we do advise YOU to visit the NFPC website “Home-Page”
and check out your current knowledge levels using our FOC Self
Assessment Questionnaire.
IMPORTANT MESSAGEInvitation to the Webinar will
be 15 minutesbefore the official start time
WebinarDelivery Date
Module 1 (Every Thursday)Planned delivery times(Note these may
vary)
29th May 2020 Webinar 1 : 9am - 10:30amWebinar 2 : 2pm –
3:30pm
Feel free to contact our Business and Customer Liaison Team for
further details
and support.Toni Davis- [email protected] Clarke
[email protected]
Cost Per Person £300.00 Exc Vat
Course Aims/Who is it for?
These WEBINAR MODULES are designed to provide a
refresher for existing technical staff, a start point for
non-
technical staff and those involved with Pneumatics at
the early stage of their working careers.
They will provide a general understanding of the use of
Pneumatics and the components parts involved in the
construction of a simple system.
Knowledge gained is at a basic level and great
emphasis will be placed on safe working practices.
These Webinar Modules will also improve
communication levels as terminology is better
understood.
Module 1- Planned Content• What is Pneumatics?• Health and
Safety: The Dangers
of Pneumatics• How do Pneumatics Work?• Basic Construction of
a
Pneumatic System• Pneumatic Drawings & Symbols• How to look
after a Pneumatic
System
IMPORTANT MESSAGE- for you to gain maximum benefit from our
Webinars, you must ensure that your home computer system can
effectively launch ZOOM. If you are in doubt before placing your
orderfeel free to contact the NFPC. We will provide you with a
written step by step plan and support you all the way. This is the
guarantee that when you pay for these Webinar, you will gain
maximum benefit.
Message from John R Savage- NFPC Director- I am aware that these
unprecedented time are new to us all. This initiative by the NFPC
Engineers to develop a range of Knowledge Based Webinars will
provide you with an element ofContinued Professional Development,
adding further value to you in your place of work, when you
eventually return.Additional Information Also be aware that the
NFPC has built its World Class reputation based on its EXTENSIVE
PRACTICAL FACILITIES used to improve both SKILLS and ROLE
COMPETENCY- Not all is lost-When the world returns to normal, you
can attend the NFPC for HANDS-ON PRACTICAL TRAINING if you advance
ontothe Stage 1 Pneumatics 3 day Course.
Webinars & Follow-on Course at NFPC at a later date-
OPTIONAL and “Pay As You Learn”
DAY 3 PRACTICALPneumaticsTRAINING
at NFPC
WebinarsOn-Line Modules
Covering Knowledge based
section1 Day
Introduction to Pneumatics (£300.00 Exc VAT) Stage 1
Electro-Pneumatics (EP1)Webinars
On-Line Modules Covering
Knowledge based section
Days 1 & 2
As you advance to the Stage1 Pneumatics Course, you can pay
£300.00 per day and attend and over the period of time that best
fits your schedule
The NFPC has the rights to change the content of this Webinarand
the delivery dates as considered necessary by the Director
Module 1
1 Day Course:-Module 1 (Knowledge Based Day)- on-line
IMPORTANT STEP CONTACT US.
To check availability and reserve your
Webinar Day, contact, Anne Clarke on 01909 504539
[email protected]
ON REQUEST
mailto:[email protected]:[email protected]
-
Webinar- Dates and TimesMaximum Group Size = 8 (on-line)
INTRODUCTION-We welcome you to attend our online TECHNICAL
WEBINARS presented by NFPC Training Engineers with a vast knowledge
and experience involved in the maintenance and management of FLUID
POWER SYSTEMS.Each Module will be presented online via ZOOM and
Candidate Group numbers per session will be limited to a maximum of
8 and hosted by NFPC Training Engineers.
We plan to provide you with an experience close to that of an
actual Technical Lecture at the NFPC, allowing you to ask questions
throughout the presentations and with our small group approach and
the experience of our staff we will further increase your
knowledge and understanding of Basic Electrics and
Electronics
Further to this, our Webinar Co-ordinators, at the NFPC, will
contact you and assist you in everyway to establish ZOOM on your
home computer system, thereby ensuring
that you can gain maximum benefit from our Webinar
presentations
Finally, we do advise YOU to visit the NFPC website “Home-Page”
and check out your current knowledge levels using our FOC Self
Assessment Questionnaire.
WebinarDelivery Date
Module 1 (Every Friday)Planned delivery times(Note these may
vary)
29th May 2020 Webinar 1 : 9am - 10:30amWebinar 2 : 2pm -
3:30pm
Feel free to contact our Business and Customer Liaison Team for
further details
and support.Toni Davis- [email protected] Clarke
[email protected]
Cost Per Person £300.00 Exc. VatCourse Aims/Who is it for?
This WEBINAR MODULE is designed to
provide a refresher for existing technical staff, a
start point for non-technical staff and those
involved with Fluid Power Systems involving the
interface of Electrical/Electronics at the early
stage of their working careers.
They will provide a general understanding the
Basics of Electrical & Electronics and the
components parts involved in the construction
of a simple system.
Knowledge gained is at a basic level and great
emphasis will be placed on safe working
practices.
These Webinar Modules will also improve
communication levels as terminology is better
understood.
Module 1- Planned Content• What is Electricity?• Health &
Safety• Basic Principles• The Basic Components• Terminology•
Cables
IMPORTANT MESSAGE- for you to gain maximum benefit from our
Webinars, you must ensure that your home computer system can
effectively launch ZOOM. If you are in doubt before placing your
orderfeel free to contact the NFPC. We will provide you with a
written step by step plan and support you all the way. This is the
guarantee that when you pay for these Webinar, you will gain
maximum benefit.
Message from John R Savage- NFPC Director- I am aware that these
unprecedented time are new to us all. This initiative by the NFPC
Engineers to develop a range of Knowledge Based Webinars will
provide you with an element ofContinued Professional Development,
adding further value to you in your place of work, when you
eventually return.
Additional InformationAlso be aware that the NFPC has built its
World Class reputation based on its EXTENSIVE PRACTICAL FACILITIES
used to improve
both SKILLS and ROLE COMPETENCY- Not all is lost- When the world
returns to normal, you can attend the NFPC forHANDS-ON PRACTICAL
TRAINING if you advance onto the Stage 1 Applied Electronics- 3 day
Course.
Webinars & Follow-on Course at NFPC at a later date-
OPTIONAL and “Pay As You Learn”
DAY 3 PRACTICALTRAINING
at NFPC
WebinarsOn-Line Modules
Covering Knowledge based
section1 Day
Introduction to Elec/Electronics (£300.00 Exc. VAT) Stage 1
Applied ElectronicsWebinars
On-Line Modules Covering
Knowledge based section
Days 1 & 2
As you advance to the Stage 1 Applied Electronics Course, you
can pay £300.00 perModule per day(+VAT) and attend and over the
period of time that best fits your schedule
The NFPC has the rights to change the content of this Webinarand
the delivery dates as considered necessary by the Director
IMPORTANT MESSAGEInvitation to the Webinar
will be 15 minutesbefore the official start
time
1 Day Course:-Module 1 (Knowledge Based Day)- on-line
IMPORTANT STEP CONTACT US.
To check availability and reserve your
Webinar Day, contact, Anne Clarke on 01909 504539
[email protected]
ON REQUEST
mailto:[email protected]:[email protected]
-
WEBINAR- Dates and TimesMaximum Group Size = 8 (on-line)
INTRODUCTION-We welcome you to attend our online TECHNICAL
WEBINARS presented by NFPC Training Engineers with a vast knowledge
and experience involved in the maintenance and management of FLUID
POWER SYTEMS.Each Module will be presented online via ZOOM and
Candidate Group numbers per session will be limited to a maximum of
8 and hosted NFPC Training Engineers.
We plan to provide you with an experience close to that of an
actual Technical Lecture at the NFPC, allowing you to ask questions
throughout the presentations and with our small group approach and
the experience of our staff we will further increase your knowledge
and understanding of Hydraulics-
Further to this, our Webinar Co-ordinators at the NFPC will
contact you and assist you in everyway to establish ZOOM on your
home computer system, thereby ensuring that you can gain maximum
benefit from our Webinar presentations.
Finally, we do advise YOU to visit the NFPC website “Home-Page”
and check out your current knowledge levels using our FOC Self
Assessment Questionnaire
IMPORTANT MESSAGEInvitation to the Webinar will be 15
minutes
before the official start time.
MondayModule 1
Delivery date/ times Note: these are flexible
TuesdayModule 2
Delivery date/ times Note: these are flexible
Content of Modules 1 & 2
9am to 10:30am- BREAK10:45am to 12:15- Lunch1pm to 2:30 pm
BREAK
2:45pm to 4:15pm
9am to 10:30am- BREAK10:45am to 12:15- Lunch1pm to 2:30 pm
BREAK
2:45pm to 4:15pm
Feel free to contact our Business and Customer Liaison Team for
further details and support.Toni Davis- [email protected]
Clarke [email protected]
Cost £300.00 Exc Vat/Person/Module/Day
IMPORTANT MESSAGE- for you to gain maximum benefit from our
Webinars, you must ensure that your home computer system can
effectively launch ZOOM. If you are in doubt before placing your
order, feel free to contact the NFPC. We will provide you with a
written step by step plan and support you all the way. This is the
guarantee that when you pay for these Webinar, you will gain
maximum benefit.
Message from John R Savage- NFPC Director- aware that these
unprecedented time are new to us all. This initiative by the NFPC
Engineers to develop a range of Knowledge Based Webinars will
provide you with an element of Continued Development, adding
further value to you in your place of work, when you eventually
return.Additional InformationAlso aware that the NFPC, has built
its World Class reputation based on its EXTENSIVE PRACTICAL
FACILITIES used to improve both SKILLS and ROLE COMPETENCY- Not all
is lost- When the world returns to normal, you can attend the NFPC
and pay an additional FEE and we will welcome you to a short
REFRESHER and that of HANDS-ON PRACTICAL HYDRAULICS- see below.
Webinar- Follow-on PRACTICAL HYDRAULICS AT THE NFPC
• 7 Basic Rules and building blocks – the
rules that govern how our systems work
and the common basic components.
• Symbols – common symbols for hydraulic
components and how to read them.
• Flow control – how we achieve flow
control and the components used.
• Pressure control – the basic pressure control valves, why we
use them and how they work.
• Direction control – the basic direction control valves and
their construction .
• Pumps – how a pump works, construction
of the main types and comparison of their
capabilities.
• Hose technology - How to understand
what a hose specification means and how
to safely use them.
• Oils and contamination - the functions of
oil and good practices relating to
contamination ingression.
• Safe Working Practices
Webinars Days 1 & 2On-Line Modules in your home
Covering Knowledge based section
Module 3DAY 3
PRACTICALTRAINING DAYS
at NFPC
Complete NFPC Stage 1 Hydraulics Course and meet the BFPA
Minimum Education Recommendations
This Course meets and exceeds BFPAMinimum Education
Recommendations
and the NFPC is a BFPA ApprovedEducation Centre
ThisWEBINAR will be available every
MONDAYfrom the 17th August
2020.Visit our website for
dates,www.nfpc.co.uk
ThisWEBINAR will be available every
TUESDAYfrom the 18th August
2020.Visit our website for
dates,www.nfpc.co.uk
The NFPC has the rights to change the content of this Webinarand
the delivery dates as considered necessary by the Director
Course Aims/Who is it for?
These WEBINAR MODULES are designed
to increase and improve the knowledge of
Maintenance Staff and Managers at all levels.
This extended knowledge will enable staff
to better maintain and manage Fluid Power
Systems with a better understanding of
component function and operation
They will follow safer working procedures
and once they have attended Module 3, their
work-based skills and role competency will improve.
Staff will also work together with greater synergy and
levels of communication.
Module 3Follow-on Practical Skills DevelopmentDay at the
NFPC.
Wednesday OR Friday9am-4pm
“YOU CHOOSE THE DAY”
from WC 17th Augustonwards
IMPORTANT STEP CONTACT US.
To check availability and reserve your
Webinar Days, contact,
Anne Clarke on 01909 504539
[email protected]
Maximum Group Size = 4
3 Day Course:-Module 1 & 2 (Knowledge Based Day)-
on-lineModule 3 (Practical Hydraulics Day) at NFPC
Follow-on Courses £300.00 Exc. Vat/ Practical Day
IMPORTANT STEP CONTACT US.
To check availability and reserve your
Practical Day, contact,
Anne Clarke on 01909 504539
[email protected]
mailto:[email protected]:[email protected]://www.nfpc.co.uk/http://www.nfpc.co.uk/
-
WEBINAR- Dates and TimesMaximum Group Size = 8 (on-line)
INTRODUCTION-We welcome you to attend our online TECHNICAL
WEBINARS presented by NFPC Training Engineers with a vast knowledge
and experience involved in the maintenance and management of FLUID
POWER SYSTEMS.Each Module will be presented online via ZOOM and
Candidate Group numbers per session will be limited to a maximum of
8 and hosted by NFPC Training Engineers.
We plan to provide you with an experience close to that of an
actual Technical Lecture at the NFPC, allowing you to ask questions
throughout the presentations and with our small group approach and
the experience of our staff we will further increase your knowledge
and understanding of Electro-Pneumatics
Further to this, our Webinar Co-ordinators at the NFPC will
contact you and assist you in everyway to establish ZOOM on your
home computer system, thereby ensuring that you can gain maximum
benefit from our Webinar presentations.
Finally, we do advise YOU to visit the NFPC website “Home-Page”
and check out your current knowledge levels using our FOC Self
Assessment Questionnaire
IMPORTANT MESSAGEInvitation to the Webinar will be 15
minutes
before the official start time.
MondayModule 1
Delivery date/ times Note: these are flexible
TuesdayModule 2
Delivery date/ times Note: these are flexible
Content of Modules 1 & 2
9am to 10:30am- BREAK10:45am to 12:15- Lunch1pm to 2:30 pm
BREAK
2:45pm to 4:15pm
9am to 10:30am- BREAK10:45am to 12:15- Lunch1pm to 2:30 pm
BREAK
2:45pm to 4:15pm
Feel free to contact our Business and Customer Liaison Team for
further details and support.Toni Davis- [email protected]
Clarke [email protected]
Cost Per Person £300.00 Exc.Vat/Person/Day
IMPORTANT MESSAGE- for you to gain maximum benefit from our
Webinars, you must ensure that your home computer system can
effectively launch ZOOM. If you are in doubt before placing your
order, feel free to contact the NFPC. We will provide you with a
written step by step plan and support you all the way. This is the
guarantee that when you pay for these Webinar, you will gain
maximum benefit.
Message from John R Savage- NFPC Director- aware that these
unprecedented time are new to us all. This initiative by the NFPC
Engineers to develop a range of Knowledge Based Webinars will
provide you with an element of Continued Development, adding
further value to you in your place of work, when you eventually
return.Additional InformationAlso aware that the NFPC, has built
its World Class reputation based on its EXTENSIVE PRACTICAL
FACILITIES used to improve both SKILLS and ROLE COMPETENCY- Not all
is lost- When the world returns to normal, you can attend the NFPC
and pay an additional FEE and we will welcome you to a short
REFRESHER and that of HANDS-ON PRACTICAL ELECTRO-PNEUMATIC
Exercises- see below.
Webinar- Follow-on with PRACTICAL ELECTRO-PNEUMATICS at the
NFPC
Course Aims/Who is it for?
These WEBINAR MODULES are designed
to increase and improve the knowledge of
Maintenance Staff at all levels.
This extended knowledge will enable Staff
to better maintain and manage the control of
Electro-Pneumatic Systems and carry out
their duties, following safer working
procedures, communication skills will be
improved and with this further level of
knowledge and understanding Staff will work
together with greater synergy..
• Basic Principles of
Compressed Air
• Compressed Air Installations
• Legal requirements
• Electro-pneumatic circuit
components
• Electrical Principles
• Electro-pneumatic diagrams
& drawings
• Control Systems &
Techniques (introduction)
• Safe Working Practices
Webinars Days 1 & 2On-Line Modules in your home
Covering Knowledge based section
DAY 3 PRACTICALTRAINING
at NFPC
This Course meets and exceeds BFPAMinimum Education
Recommendations
and the NFPC is a BFPA ApprovedEducation Centre
ThisWEBINAR will be available every
MONDAYfrom the 17th
August 2020.Visit our website
for dates,www.nfpc.co.uk
ThisWEBINAR will be available every
TUESDAYfrom the 18th
August 2020.Visit our website
for dates,www.nfpc.co.uk
The NFPC has the rights to change the content of this Webinarand
the delivery dates as considered necessary by the Director
Complete FOC On-Line Pneumatics AssessmentPlease see Website
for
details
Image Required
Module 3Follow-on Practical Skills DevelopmentDay at the
NFPC.
Wednesday OR Friday9am-4pm
“YOU CHOOSE THE DAY”
from WC 17th Augustonwards
IMPORTANT STEP CONTACT US.
To check availability and reserve your
Practical Day, contact, Anne Clarke on 01909 504539
[email protected]
Maximum Group Size = 4
3 Day Course:-Module 1 & 2 (Knowledge Based Day)-
on-line
Module 3 (Practical Hydraulics Day) at NFPC
Follow-on Courses £300.00 Exc. Vat/ Practical Day
IMPORTANT STEP CONTACT US.
To check availability and reserve your
Webinar Days, contact, Anne Clarke on 01909 504539
[email protected]
mailto:[email protected]:[email protected]://www.nfpc.co.uk/http://www.nfpc.co.uk/
-
WEBINAR- Dates and TimesMaximum Group Size = 8 (on-line)
INTRODUCTION-We welcome you to attend our online TECHNICAL
WEBINARS presented by NFPC Training Engineers with a vast knowledge
and experience involved in the maintenance and management of FLUID
POWER SYTEMS.Each Module will be presented online via ZOOM and
Candidate Group numbers per session will be limited to a maximum of
8 and hosted by NFPC Training Engineers.
We plan to provide you with an experience close to that of an
actual Technical Lecture at the NFPC, allowing you to ask questions
throughout the presentations and with our small group approach and
the experience of our staff we will further increase your knowledge
and understanding of Applied Electronics relating to Fluid Power
SystemsFurther to this, our Webinar Co-ordinators at the NFPC will
contact you and assist you in everyway to establish ZOOM on your
home computer system, thereby ensuring that you can gain maximum
benefit from our Webinar presentations.
Finally, we do advise YOU to visit the NFPC website “Home-Page”
and check out your current knowledge levels using our FOC Self
Assessment Questionnaire
MondayModule 1
Delivery date/ times Note: these are flexible
TuesdayModule 2
Delivery date/ times Note: these are flexible
Content of Modules 1 & 2
9am to 10:30am- BREAK10:45am to 12:15- Lunch1pm to 2:30 pm
BREAK
2:45pm to 4:15pm
9am to 10:30am- BREAK10:45am to 12:15- Lunch1pm to 2:30 pm
BREAK
2:45pm to 4:15pm
Cost -£300.00 Exc. Vat/Person/Module/Day
IMPORTANT MESSAGE- for you to gain maximum benefit from our
Webinars, you must ensure that your home computer system can
effectively launch ZOOM. If you are in doubt before placing your
order, feel free to contact the NFPC. We will provide you with a
written step by step plan and support you all the way. This is the
guarantee that when you pay for these Webinar, you will gain
maximum benefit.
Webinar- Follow-on PRACTICAL TRAINING AT THE NFPC
Course Aims/Who is it for?
These WEBINAR MODULES are designed
to increase and improve the knowledge of
Maintenance Staff and Managers at all levels.
This extended knowledge will enable staff
to better maintain and manage Fluid Power
Systems with an interface of Electronics and
Control. They will follow safer working procedures
and once they have attended Module 3, their
work-based skills and role competency will
improve.
Staff will also work together with greater synergy
and levels of communication.
On completion of this course candidates will be
able to:
• 1) Describe basic electrical principles and
their importance to modern Fluid Power
control systems.
• 2) Describe the function and application of
common electrical/electronic components.
• 3) Explain various methods of providing
electrical power supply.
• 4) Identify cable types, termination methods
used and their applications.
• 5) Identify component symbols and interpret
manufacturers technical documentation to
safely handle, install, commission and fault
find on these devices in a systems
environment.
• 6) Describe the methods used for safe fault-
finding on an "Integrated System".
• Follow Safer Working Procedures
Webinars Days 1 & 2On-Line Modules in your home
Covering Knowledge based section
Module 3DAY 3 PRACTICAL
TRAININGat NFPC
Complete NFPC Stage 1 Hydraulics Course and meet the BFPA
Minimum Education Recommendations
ThisWEBINAR will be available every
TUESDAYfrom the 18th
August 2020.Visit our website
for dates,www.nfpc.co.uk
ThisWEBINAR will be available every
WEDNESDAYfrom the 19th
August 2020.Visit our website
for dates,www.nfpc.co.uk
The NFPC has the rights to change the content of this Webinarand
the delivery dates as considered necessary by the Director
Module 3Follow-on Practical Skills DevelopmentDay at the
NFPC.
Thursday OR Friday9am-4pm
“YOU CHOOSE THE DAY”
from WC 17th
Augustonwards
IMPORTANT STEP CONTACT US.
To check availability and reserve your
Practical Day, contact,
Anne Clarke on 01909 504539
[email protected]
Maximum Group Size = 4
3 Day Course:-Module 1 & 2 (Knowledge Based Day)-
on-lineModule 3 (Practical Hydraulics Day) at NFPC
Message from John R Savage- NFPC Director- aware that these
unprecedented time are new to us all. This initiative by the NFPC
Engineers to develop a range of Knowledge Based Webinars will
provide you with an element of Continued Development, adding
further value to you in your place of work, when you eventually
return.Additional InformationAlso aware that the NFPC, has built
its World Class reputation based on its EXTENSIVE PRACTICAL
FACILITIES used to improve both SKILLS and ROLE COMPETENCY- Not all
is lost- When the world returns to normal, you can attend the NFPC
and pay an additional FEE and we will welcome you to a short
REFRESHER and that of HANDS-ON PRACTICAL HYDRAULICS- see below.
Feel free to contact our Business and Customer Liaison Team for
further details and support.Toni Davis- [email protected]
Clarke [email protected]
IMPORTANT MESSAGEInvitation to the Webinar will be 15
minutes
before the official start time.
This Course meets and exceeds BFPAMinimum Education
Recommendations
and the NFPC is a BFPA ApprovedEducation Centre
Follow-on Courses £300.00 Exc. Vat/ Practical Day
IMPORTANT STEP CONTACT US.
To check availability and reserve your Webinar Days,
contact, Anne Clarke on 01909 504539
[email protected]
http://www.nfpc.co.uk/http://www.nfpc.co.uk/mailto:[email protected]:[email protected]
-
WEBINAR- Dates and TimesMaximum Group Size = 8 (on-line)
INTRODUCTION-We welcome you to attend our online TECHNICAL
WEBINARS presented by NFPC Training Engineers with a vast knowledge
and experience involved in the maintenance and management of FLUID
POWER SYTEMS.Each Module will be presented online via ZOOM and
Candidate Group numbers per session will be limited to a maximum of
8 and hosted by NFPC Training Engineers.
We plan to provide you with an experience close to that of an
actual Technical Lecture at the NFPC, allowing you to ask questions
throughout the presentations and with our small group approach and
the experience of our staff we will further increase your knowledge
and understanding of Hydraulics
Further to this, our Webinar Co-ordinators at the NFPC will
contact you and assist you in everyway to establish ZOOM on your
home computer system, thereby ensuring that you can gain maximum
benefit from our Webinar presentations.
Finally, we do advise YOU to visit the NFPC website “Home-Page”
and check out your current knowledge levels using our FOC Self
Assessment Questionnaire
IMPORTANT MESSAGEInvitation to the Webinar will be 15
minutes
before the official start time.
MondayModule 1
Delivery date/ times Note: these are flexible
TuesdayModule 2
Delivery date/ times Note: these are flexible
Content of Modules 1 & 2
9am to 10:30am- BREAK10:45am to 12:15- Lunch1pm to 2:30 pm
BREAK
2:45pm to 4:15pm
9am to 10:30am- BREAK10:45am to 12:15- Lunch1pm to 2:30 pm
BREAK
2:45pm to 4:15pm
Cost - £300.00 Exc. Vat/Person/Module/Day
IMPORTANT MESSAGE- for you to gain maximum benefit from our
Webinars, you must ensure that your home computer system can
effectively launch ZOOM. If you are in doubt before placing your
order, feel free to contact the NFPC. We will provide you with a
written step by step plan and support you all the way. This is the
guarantee that when you pay for these Webinar, you will gain
maximum benefit.
Message from John R Savage- NFPC Director- aware that these
unprecedented time are new to us all. This initiative by the NFPC
Engineers to develop a range of Knowledge Based Webinars will
provide you with an element of Continued Development, adding
further value to you in your place of work, when you eventually
return.Additional InformationAlso aware that the NFPC, has built
its World Class reputation based on its EXTENSIVE PRACTICAL
FACILITIES used to improve both SKILLS and ROLE COMPETENCY- Not all
is lost- When the world returns to normal, you can attend the NFPC
and pay an additional FEE and we will welcome you to a short
REFRESHER and that of HANDS-ON PRACTICAL HYDRAULICS- see below.
Webinar- Follow-on PRACTICAL HYDRAULICS AT THE NFPC
Course Aims/Who is it for?
These WEBINAR MODULES are designed
to increase and improve the knowledge of
Maintenance Staff at all levels.
This extended knowledge will enable staff
to better maintain and manage Hydraulic
Systems and carryout their duties, following
safer working procedures, communication
skills will be improved and with this further
level of knowledge and understanding
Staff will work together with greater synergy..
On completion of these WEBINARS you will know:
• 1) The operation of 2-Stage direction valves and
how the pilot controls function.
• 2) The benefits of poppet valves and cartridge
valves and how they are applied to systems
• 3) The principle of operation of proportional
valves and the electronics required to operate
them.
• 4) How load holding is achieved and the
application of externally piloted counterbalance
valves.
• 5) The types of pumps and pump controls used
in industrial applications and how they work.
• 6) How to monitor pumps, causes of failure and
how to install and commission a pump.
• 7) How an accumulator functions with electrical
pressure control.
• 8) The requirements of an accumulator safety
block and how to operate it safely.
• 9) The types of cylinder used in industry, the
effects of area ratios on forces and speeds and
how pressure intensification can occur.
• 10) The types of hydraulic motor used in
industry, the speeds and torque that can be
achieved.
• 11) The oils and other hydraulic fluids used in
industry, interpreting laboratory reports and
fluid cleanliness requirements.
• 12) Maintenance techniques and the cost of
failure.
• 13) Logical fault finding techniques.
Stage 2 Industrial Hydraulics Webinars Days 1 & 2
On-Line Modules in your homeCovering Knowledge based section
DAY 3 & 4 PRACTICALTRAINING
at NFPC
Complete NFPC Stage 1 Hydraulics Course and meet the BFPA
Minimum Education Recommendations
Wednesday/Thursday
Modules 3 & 4Follow-on Practical Skills Development
Days at NFPC9am -4pm
“YOU CHOOSE THE DAYS”
The NFPC is a BFPA ApprovedEducation Centre and the only Centre
in the UK
offering CETOP Competence Based Qualifications at all Levels
Maximum Group Size = 4
IMPORTANT STEP
CONTACT US.To check availability
and reserve your Practical Day,
contact, Anne Clarke on 01909 504539
[email protected]
4 Day Course:-Module 1 & 2 (Knowledge Based Day)-
on-line
Module 3 & 4 (Practical Hydraulics Days) at NFPC
Follow-on Courses £300.00 Exc. Vat/ Practical Day
IMPORTANT STEP CONTACT US.
To check availability and reserve your Webinar Days,
contact, Anne Clarke on 01909 504539
[email protected]
Feel free to contact our Business and Customer Liaison Team for
further details and support.Toni Davis- [email protected]
Clarke [email protected]
mailto:[email protected]:[email protected]
-
WEBINAR- Dates and TimesMaximum Group Size = 8 (on-line)
INTRODUCTION-We welcome you to attend our online TECHNICAL
WEBINARS presented by NFPC Training Engineers with a vast knowledge
and experience involved in the maintenance and management of FLUID
POWER SYTEMS.Each Module will be presented online via ZOOM and
Candidate Group numbers per session will be limited to a maximum of
8 and hosted by NFPC Engineers.
We plan to provide you with an experience close to that of an
actual Technical Lecture at the NFPC, allowing you to ask questions
throughout the presentations and with our small group approach and
the experience of our staff we will further increase your knowledge
and understanding of Mobile Hydraulics and Systems
Further to this, our Webinar Co-ordinators at the NFPC will
contact you and assist you in everyway to establish ZOOM on your
home computer system, thereby ensuring that you can gain maximum
benefit from our Webinar presentations.
Finally, we do advise YOU to visit the NFPC website “Home-Page”
and check out your current knowledge levels using our FOC Self
Assessment Questionnaire
IMPORTANT MESSAGEInvitation to the Webinar will be 15
minutes
before the official start time.
MondayModule 1
Delivery date/ times Note: these are flexible
TuesdayModule 2
Delivery date/ times Note: these are flexible
Content of Modules 1 & 2
9am to 10:30am- BREAK10:45am to 12:15- Lunch1pm to 2:30 pm
BREAK
2:45pm to 4:15pm
9am to 10:30am- BREAK10:45am to 12:15- Lunch1pm to 2:30 pm
BREAK
2:45pm to 4:15pm
IMPORTANT MESSAGE- for you to gain maximum benefit from our
Webinars, you must ensure that your home or work based computer
system can effectively launch ZOOM. If you are in doubt before
placing your order, feel free to contact the NFPC. We will provide
you with a written step by step plan and support you all the way.
This is the guarantee that when you pay for these Webinar, you will
gain maximum benefit.
Webinar- Follow-on PRACTICAL HYDRAULICS AT THE NFPC
Follow-on Courses £300.00 Exc. Vat/ Practical Day
Course Aims/Who is it for?
These WEBINAR MODULES are designed
to increase and improve the knowledge and
capability of Staff at all level involved in
Maintenance and Management of Mobile
Systems and Plant across all sectors
This extended knowledge will enable staff
to better maintain and manage Mobile Hydraulic
Systems and carryout their duties, following
safer working procedures, communication
skills will be improved and with this further
level of knowledge and understanding
Staff will work together with greater synergy..
On completion of these WEBINARS you will know:
• 1) The embedded principles associated with the
operation of mobile plant.
• 2) The relationship between prime mover power
and performance associated with hydraulic
power transmission
• 3) The general layout of a closed hydrostatic
transmission system
• 4) The principles of hydrostatic steering systems
• 5) The auxiliary pumps and associated controls
in use.
• 6) The types of multi-function mobile valves and
control features
• 7)The types of auxiliary flow control devices in
common use.
• 8) The basic principles of machine braking and
cooling systems.
• 9)The principle of load holding and motion
control.
• 10) The procedures to follow to carry out
effective fault diagnosis.
• 11) The importance of contamination control.
• 12) Have a greater insight to health and safety.
Stage 2 Mobile Hydraulics Webinars Days 1 & 2
On-Line Modules in your homeCovering Knowledge based
section
DAYS 3 & 4 PRACTICALTRAININGat NFPC
Complete NFPC Stage 1 Hydraulics Course and meet the BFPA
Minimum Education Recommendations
Wednesday/Thursday
Modules 3 & 4Follow-on Practical Skills Development
Days at NFPC9am -4pm
“YOU CHOOSE THE DAYS”
Cost - £300.00 Exc. Vat/Person/Module/Day
Minimum Pre-requisite- NFPC Stage 1 Hydraulics.Further
Recommendation- Stage 1
Elect/Electronics would also be advantageous
The NFPC has the rights to change the content of this Webinarand
the delivery dates as considered necessary by the Director
Maximum Group Size = 4
IMPORTANT STEP
CONTACT US.To check availability
and reserve your Practical Day,
contact, Anne Clarke on 01909 504539
[email protected]
4 Day Course:-Module 1 & 2 (Knowledge Based Day)-
on-line
Module 3 & $ (Practical Hydraulics Days) at NFPC
The NFPC is a BFPA ApprovedEducation Centre and the only Centre
in the UK offering CETOP Competence
Based Qualifications at all Levels
Message from John R Savage- NFPC Director- aware that these
unprecedented time are new to us all. This initiative by the NFPC
Engineers to develop a range of Knowledge Based Webinars will
provide you with an element of Continued Development, adding
further value to you in your place of work, when you eventually
return.Additional InformationAlso aware that the NFPC, has built
its World Class reputation based on its EXTENSIVE PRACTICAL
FACILITIES used to improve both SKILLS and ROLE COMPETENCY- Not all
is lost- When the world returns to normal, you can attend the NFPC
and pay an additional FEE and we will welcome you to a short
REFRESHER and that of HANDS-ON PRACTICAL HYDRAULICS- see below.
Feel free to contact our Business and Customer Liaison Team for
further details and support.Toni Davis- [email protected]
Clarke [email protected]
IMPORTANT STEP CONTACT US.
To check availability and reserve your Webinars Days,
contact,
Anne Clarke on 01909 504539
[email protected]
mailto:[email protected]:[email protected]
-
Webinar TimesMaximum Group Size = 8 (on-line)
INTRODUCTION-We welcome you to attend our online TECHNICAL
WEBINARS presented by NFPC Training Engineers with a vast knowledge
and experience involved in the maintenance and management of FLUID
POWER SYTEMS.Each Module will be presented online via ZOOM and
Candidate Group numbers per session will be limited to a maximum of
8 and hosted by NFPC Training Engineers.
We plan to provide you with an experience close to that of an
actual Technical Lecture at the NFPC, allowing you to ask questions
throughout the presentations and with our small group approach and
the experience of our staff we will further increase your knowledge
and understanding of Hydraulics-Fault Prevention and
Troubleshooting Techniques.
Further to this, our Webinar Co-ordinator at the NFPC will
contact you and assist you in everyway to establish ZOOM on your
home computer system, thereby ensuring that you can gain maximum
benefit from our Webinar presentations
Finally, we do advise YOU to visit the NFPC website “Home-Page”
and check out your current knowledge levels using our FOCSelf
Assessment Questionnaire.
IMPORTANT MESSAGEInvitation to the Webinar
will be 15 minutesbefore the official start time
WebinarDelivery DATES
Module 1 Planned delivery times (These are flexible)
Module 2Practical Skills
Development at NFPC
9am - 10:30am – Break11am-12:30 – Lunch
2pm- 4pm pm
Follow – on Day9am- 4pm
Will be availableevery Tuesday fromthe 18 August 2020
Feel free to contact our Business and Customer Liaison Team for
further details and support.Toni Davis- [email protected]
Clarke [email protected]
Cost Per Person/Module/Day £300.00 Exc VatCourse Aims/Who is it
for?
This STAGE 2 course is a follow
on from the Stage 1 Hydraulics
and designed for those who
manage and maintain and
maintain machinery employing
Hydraulics as part of the overall
system.
It is a down-to-earth course
delivered by NFPC Training
Engineers with a vast experience
associated with fault diagnosis,
fault-prevention and how to better
manage systems for optimum
performance. The follow-on
practical fault-finding day at the
NFPC, will provide the opportunity
for Candidates to the apply Fault-
Cause- Remedy approach to fault-
finding: a technique that they can
apply back in their place of work.
IMPORTANT MESSAGE- for you to gain maximum benefit from our
Webinars, you must ensure that your home computer system can
effectively launch ZOOM. If you are in doubt before placing your
orderfeel free to contact the NFPC. We will provide you with a
written step by step plan and support you all the way. This is the
guarantee that when you pay for these Webinar, you will gain
maximum benefit
Message from John R Savage- NFPC Director- aware that these
unprecedented time are new to us all. This initiative by the NFPC
Engineers to develop a range of Knowledge Based Webinars will
provide you with an element of Continued Development, adding
further value to you in your place of work, when you eventually
return.Additional InformationAlso aware that the NFPC, has built
its World Class reputation based on its EXTENSIVE PRACTICAL
FACILITIES used to improve both SKILLS and ROLE COMPETENCY- Not all
is lost- When the world returns to normal, you can attend the NFPC
and pay an additional FEE and we will welcome you to the Centre for
HANDS-ON PRACTICAL HYDRAULICS- see below
Webinar- Follow-on Course at NFPC at a later date-
MODULE 2 1 DAY
PRACTICALTRAINING
at NFPC
MODULE 1Webinars
On-Line Modules in your home
Covering Knowledge based section
Follow-on Course= £300.00/pp/day ExcVat-
MODULE 1 – Webinar Course Content
Module 1WEBINAR will be availableON REQUEST
The NFPC has the rights to change the content of this Webinarand
the delivery dates as considered necessary by the Director
Module 2Follow-on
Practical Skills Development
Day at the NFPC.
(Fault-finding on live systems)
IMPORTANT STEP CONTACT US.
To check availability and reserve your
Practical Day, contact, Anne Clarke on 01909 504539
[email protected]
2 Day Course:-Module 1 (Knowledge Based Day)- on-line
Module 2 (Practical Hydraulics Day) at NFPC
Maximum Group Size = 4
On completion of this course Webinar candidates will:1) know the
causes of faults in hydraulic systems2) have the knowledge base
required to carryout fault diagnosis3) know the symptoms that
relate to changes in performance 4) know the causes of failure and
associated preventive measures5) know the "Principles of
Troubleshooting"6) know the step by step procedures to follow to
carry out fault diagnosis7) know the importance of health and
performance monitoring8) know the causes of hydraulic hose failure
9) know the problems associated with hydraulic oils in service10)
know the importance of good contamination management techniques11)
know the importance of following safe working practices at all
times
Bookings direct with NFPC
Stage 1 Hydraulics
IMPORTANT STEP CONTACT US.
To check availability and reserve your
Webinar Day, contact,
Anne Clarke on 01909 504539
[email protected]
ON REQUEST
mailto:[email protected]:[email protected]
-
Maximum Group Size = 8 (on-line)
INTRODUCTION-We welcome you to attend our online TECHNICAL
WEBINARS presented by NFPC Training Engineers with a vast knowledge
and experience involved in the maintenance and management of FLUID
POWER SYTEMS.Each Module will be presented online via ZOOM and
Candidate Group numbers per session will be limited to a maximum of
8 and hosted by NFPC Training Engineers.
We plan to provide you with an experience close to that of an
actual Technical Lecture at the NFPC, allowing you to ask questions
throughout the presentations and with our small group approach and
the experience of our staff we will further increase your knowledge
and understanding of the application and safe management of systems
using Hydraulics Accumulators
Further to this, our Webinar Co-ordinator at the NFPC will
contact you and assist you in everyway to establish ZOOM on your
home computer system, thereby ensuring that you can gain maximum
benefit from our Webinar presentations
Finally, we do advise YOU to visit the NFPC website “Home-Page”
and check out your current knowledge levels using our FOC Self
Assessment Questionnaire.
IMPORTANT MESSAGEInvitation to the Webinar will
be 15 minutesbefore the official start time
WebinarDelivery DATES
Module 1 Planned delivery times( Note these may vary)
Module 2Practical Skills
Development at NFPC
9am – 4pmWith Lunch time- morning and afternoon breaks as
agreed
Follow – on Day9am- 4pm
Will be availableevery Tuesday fromthe 18 August 2020
Feel free to contact our Business and Customer Liaison Team for
further details and support.Toni Davis- [email protected]
Clarke [email protected]
Cost Per Person £300.00 per Module/Day- Exc Vat
Course Aims/Who is it for?
This Stage 2 Course is a follow-on from the
NFPC Stage 1 Hydraulics Course.
This Course will:
• Take your overall knowledge and skills to
the next level to enable you to better
manage and maintain hydraulic systems
safely involving the use of
ACCUMULATORS
• Ensure that you know the correct
procedures to follow when carrying out any
maintenance or routine inspection on
systems involving the use of
ACCUMULATORS
• Developed for staff involved in the
maintenance and management of
hydraulic systems involving the use of
accumulators whose duties include
inspection, checking performance and pre-
charging as necessary.
IMPORTANT MESSAGE- for you to gain maximum benefit from our
Webinars, you must ensure that your home computer system can
effectively launch ZOOM. If you are in doubt before placing your
orderfeel free to contact the NFPC. We will provide you with a
written step by step plan and support you all the way. This is the
guarantee that when you pay for these Webinar, you will gain
maximum benefit
Message from John R Savage- NFPC Director- aware that these
unprecedented time are new to us all. This initiative by the NFPC
Engineers to develop a range of Knowledge Based Webinars will
provide you with an element of Continued Development, adding
further value to you in your place of work, when you eventually
return.Additional InformationAlso aware that the NFPC, has built
its World Class reputation based on its EXTENSIVE PRACTICAL
FACILITIES used to improve both SKILLS and ROLE COMPETENCY- Not all
is lost- When the world returns to normal, you can attend the NFPC
and pay an additional FEEand we will welcome you to the Centre for
HANDS-ON PRACTICAL HYDRAULICS and Competence Based Asssessments-
see below
Recommended Progression RouteFollow-on Course= £300.00 PP/Exc
Vat-
MODULE 1 – Webinar Course Objectives
The NFPC has the rights to change the content of this Webinarand
the delivery dates as considered necessary by the Director
2 Day Course:-Module 1 (Knowledge Based Day)- on-line
Module 2 (Practical Hydraulics Day) at NFPC
Maximum Group Size = 4
Module 1WEBINAR will be availableON REQUEST
Module 2Follow-on
Practical Day at the NFPC.
8am-5pm to include• Written Assessment
with a pass mark of 60%
• Practical Tasks(Competence Based)
One-to-one Assessment (Pass or Fail)
IMPORTANT STEP CONTACT US.
To check availability and reserve your
Practical Day, contact, Anne Clarke on 01909 504539
[email protected]
Candidates will receive a comprehensive set of course notes
MODULE 2 (at the NFPC) Stage 2 Accumulators
Written Assessment and Practical Task Assessment
MODULE 1Stage 2 Accumulators
WebinarOn-Line Module in your home
Covering Knowledge based section
Stage 1 Hydraulics
1) Know the different types of accumulators in common use,
together with their operating, principles, characteristics and
applications
2) Know the correct procedures for examining / inspection of
accumulators3) Understand the risks and dangers during
installation, examination and
maintenance of accumulators4) Identify Regulations appertaining
to accumulator examination and testing 5) Perform a routine
inspection and charging of an accumulator pre-charge
pressure6) Complete a written procedure, risk assessment and
report of
maintenance carried out on an accumulator.7) Complete a written
exam on accumulators and auxiliary equipment
IMPORTANT STEP CONTACT US.
To check availability and reserve your
Webinar Day, contact,
Anne Clarke on 01909 504539
[email protected]
ON REQUEST
mailto:[email protected]:[email protected]
-
WEBINAR- Dates and TimesMaximum Group Size = 8 (on-line)
INTRODUCTION-We welcome you to attend our online TECHNICAL
WEBINARS presented by NFPC Training Engineers with a vast knowledge
and experience involved in the maintenance and management of FLUID
POWER SYTEMS.Each Module will be presented online via ZOOM and
Candidate Group numbers per session will be limited to a maximum of
8 and hosted by NFPC Training Engineers.
We plan to provide you with an experience close to that of an
actual Technical Lecture at the NFPC, allowing you to ask questions
throughout the presentations and with our small group approach and
the experience of our staff we will further increase your knowledge
and understanding of Hydraulics- linked to the Offshore
SectorFurther to this, our Webinar Co-ordinators at the NFPC will
contact you and assist you in everyway to establish ZOOM on your
home computer system, thereby ensuring that you can gain maximum
benefit from our Webinar presentations.
Finally, we do advise YOU to visit the NFPC website “Home-Page”
and check out your current knowledge levels using our FOC Self
Assessment Questionnaire
IMPORTANT MESSAGEInvitation to the Webinar will be 15
minutes
before the official start time.
MondayModule 1
Delivery date/ times Note: these are flexible
TuesdayModule 2
Delivery date/ times Note: these are flexible
Content of Modules 1 & 2
9am to 10:30am- BREAK10:45am to 12:15- Lunch1pm to 2:30 pm
BREAK
2:45pm to 4:15pm
9am to 10:30am- BREAK10:45am to 12:15- Lunch1pm to 2:30 pm
BREAK
2:45pm to 4:15pm
Feel free to contact our Business and Customer Liaison Team for
further details and support.Toni Davis- [email protected]
Clarke [email protected]
Cost - £300.00 Exc Vat/Person/Module/Day
IMPORTANT MESSAGE- for you gain maximum benefit from our
Webinars, you must ensure that your home computer system can
effectively launch ZOOM. If you are in doubt before placing your
order, feel free to contact the NFPC. We will provide you with a
written step by step plan and support you all the way. This is the
guarantee that when you pay for these Webinar, you will gain
maximum benefit.
Message from John R Savage- NFPC Director- aware that these
unprecedented time are new to us all. This initiative by the NFPC
Engineers to develop a range of Knowledge Based Webinars will
provide you with an element of Continued Development, adding
further value to you in your place of work, when you eventually
return.Additional InformationAlso aware that the NFPC, has built
its World Class reputation based on its EXTENSIVE PRACTICAL
FACILITIES used to improve both SKILLS and ROLE COMPETENCY- Not all
is lost- When the world returns to normal, you can attend the NFPC
and pay an additional FEE and we will welcome you to a short
REFRESHER and that of HANDS-ON PRACTICAL HYDRAULICS- see below.
Webinar- Follow-on PRACTICAL HYDRAULICS AT THE NFPC
Follow-on Course=£300.00 pp/per day Exc Vat-
Course Aims/Who is it for?
These WEBINAR MODULES are designed
to increase and improve the knowledge of
Maintenance Staff at all levels managing
a variety of systems supporting the Offshore
Sector
This course will extended knowledge and skills,
enable staff to better maintain and manage
Hydraulic Systems and carryout their duties,
following safer working procedures.
Communication skills will be improved and with
this further level of knowledge and
understanding Staff will work together with
greater synergy..
• 1) The function of pilot controlled DCV's, logic
cartridge valves, proportional valves & load
holding valves.
• 2) Operation and performance of pumps and
pump controls in common use
• 3) The recommended procedures to follow for
installation and commissioning
• 4) The maintenance techniques in current use and
their effectiveness.
• 5) The causes of failure in a hydraulic system and
the fault finding procedures to follow.
• 6) Risk assessment and the health and safety
requirements for hydraulic systems.
Webinars Days 1 & 2On-Line Modules in your home
Covering Knowledge based section
DAYS 3 & 4 PRACTICALTRAINING
at NFPC
Complete NFPC Stage 1 Hydraulics Course and meet the BFPA
Minimum Education Recommendations
Monday/Tuesday
Following Week
Modules 3 & 4Follow-on Practical Skills Development
Days at NFPC9am -4pm
”
The NFPC is a BFPA ApprovedEducation Centre and the only Centre
in the UK
offering CETOP Competence Based Qualifications at all Levels
Maximum Group Size = 4
4 Day Course:-Module 1 & 2 (Knowledge Based Day)-
on-line
Module 3 & 4 (Practical Hydraulics Days) at NFPC
IMPORTANT STEP CONTACT US.
To check availability and reserve your places contact, Anne
Clarke on 01909 504539
[email protected]
Follow-on PRACTICAL SKILLS DEVELOPMENT DAYS1) Build hydraulic
circuits by interpreting a hydraulic circuit diagram.
2) Set pressure control on pumps, relief valves and
counterbalance functions. 3) Connect the electrical interface to
the hydraulic controls using manual switches and pressure
switches.4) Build and test a winch circuit5) Apply load holding
techniques.6) Set up an amplifier to operate a proportional DCV7)
Compare pump pressure compensator and load sensing controllers.
8) Apply specific fault finding techniques to hydraulic
circuits.
IMPORTANT STEP CONTACT US.
To check availability and reserve your
Practical Day, contact, Anne Clarke on 01909 504539
[email protected]
ON REQUEST
mailto:[email protected]:[email protected]
-
Maximum Group Size = 8 (on-line)
INTRODUCTION-We welcome you to attend our online TECHNICAL
WEBINARS presented by NFPC Associate Training Engineer RICHARD
WALKER with a vast knowledge and experience involved in Hydraulic
Hose Technology
This Module will be presented online via ZOOM and Candidate
Group numbers per session will be limited to a maximum of 8.
IMPORTANT MESSAGEInvitation to the Webinar will be 15
minutes
before the official start time
WebinarDelivery DATES
Module 1 Planned delivery times( Note these may vary)
(9am-10:30am) BREAK (10:45- 12:15) Lunch (1pm-3pm)
Feel free to contact our Business and Customer Liaison Team for
further details and support.Toni Davis- [email protected]
Clarke [email protected]
Cost Per Person £300.00 per Module Exc Vat
On completion of this course candidates will:-
• know the construction of a flexible hydraulic hose and the
function of each component part
• know the criteria for hose specification relating to size,
temperature, application, media and pressures
• be able to recognise factors that can affect hose life
• know the safe recommended procedures to follow when making
a flexible hose assembly
• know the meaning and importance of the data printed on the
hose lay line
• be able to identify the cause of a damaged hose and the
necessary preventive measures to apply
• be able to recognise hose fittings, adaptor threads and
sealing
methods for particular applications
• know the importance of correct routing and final installation
of a
hose assembly
During the course YOU will have an opportunity to discuss
any
problems relating to hoses and experiences within the
workplace
IMPORTANT MESSAGE- for you to gain maximum benefit from our
Webinars, you must ensure that your home computer system can
effectively launch ZOOM. If you are in doubt before placing your
orderfeel free to contact the NFPC. We will provide you with a
written step by step plan and support you all the way. This is the
guarantee that when you pay for these Webinar, you will gain
maximum benefit
Message from John R Savage- NFPC Director- aware that these
unprecedented time are new to us all. This initiative by the NFPC
Engineers to develop a range of Knowledge Based Webinars will
provide you with an element of Continued Development, adding
further value to you in your place of work, when you eventually
return.
Webinar Course Objectives
The NFPC has the rights to change the content of this Webinarand
the delivery dates as considered necessary by the Director
9am start – 3pm finishModule 1 (Knowledge Based Day)-
on-line
ThisWEBINAR will be availableON REQUEST
IMPORTANT STEP CONTACT US.
To check availability and reserve your
Webinar Day, contact, Anne Clarke on 01909 504539
[email protected] will receive a comprehensive set of
course notes
MODULE 1WEBINAR- HYDRAULIC HOSE ASSEMBLY
On-Line Module in your homeCovering Knowledge based section
Richard Walker has a lifetime of experience working in the
hydraulic hose and related connectors industry; specifying,
fabricating and installing hose assemblies, in managerial roles
related to product management, contamination management, quality
management, technical support and in particular training. Richard
is now an Independent Consultant & Trainer; passing on his
extensive knowledge and skills to educate and improve staff
performance and safety across all sectors of UK Industry where
hydraulic systems are employed.
Course Aims/Who is it for?
This WEBINAR is designed for those involved in
the maintenance and management of Systems
employing Hydraulics of which the application of
HYDRAULIC HOSES plays a vital role.
This same course will benefit any one associated
with hydraulic hose management from that of
selection, construction/assembly to installation and
inspection. This is a “down-to-earth” course
providing you with a foundation of vital knowledge
to support you in your place of work.
Hydraulic Hoses are a vital part of every Hydraulic
system and often appear to be less important than
the other system components, yet they can be the
most dangerous part of the system if not fully
understood and managed to assure maximum
safety at all times.
This is an INTRODUCTORY LEVEL WEBINARis designed and developed
to improveSafe Working Practices and work based
performance
ON REQUEST
mailto:[email protected]:[email protected]