This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Merch Source Projector Entertainment IIMotherboard
Is your projector not responding? It could be your motherboard!
作成者: Michael Tan
Merch Source Projector Entertainment II Motherboard 下書き: 2015-06-16ガイド ID: 36762 -
Flip the projector onto its back and unscrew the nine 15mm screws using the Phillips #0 screwdriver.
手順手順 2
Flip the projector right side up andunscrew the two 12mm screws onthe light bulb panel located at therear of the projector with a Phillips#0 screw head.
The bottom right panel screw doesnot come completely out the paneldoor.
Merch Source Projector Entertainment II Motherboard 下書き: 2015-06-16ガイド ID: 36762 -
To reassemble your device, follow these instructions in reverse order.
手順手順 6
Solder off all of the connections on the motherboard with a soldering iron.
Once connections are soldered off, the motherboard should be detached and ready forreplacement.
Need some help? Follow this guide to learn soldering basics.
While soldering the metal connections can get very hot. Never touch the iron with your hand. alsomake sure that the projector is fully turned off and not plugged in.
If there is hot glue on top on the connection with the motherboard, you will need to peel it off usingyour fingers.
Merch Source Projector Entertainment II Motherboard 下書き: 2015-06-16ガイド ID: 36762 -