Megger Electrical Testing Instruments - Cable Fault Locators, High Voltage Detectors & Voltage Indicators

Electrical Test Instruments

17th Edition Multi-Function TestersAward winning MFT1700 series

PAT TestersThe efficient PAT400 – Now even faster

CAT IV TestersFrom the ground up – Designed to keep you safe

The word ‘Megger’ is a registered trademark

With memory for 10,000 assets and the capability of uploading assets, test and location information you can be assured that you are working with the most productive PAT tester on the market.

PAT400 series downloading portable appliance tester

A really tough combination that could save your life, bring Megger build quality and performance to safe isolation.

TPT series and MPU690 two pole testers and proving unit

Remove the mystery from cable fault location with this easy to use TDR.

TDR1000/3 Cable fault locator

WW

W.M

EG

GER

.CO

M

Copyright © 2013 Megger Limited Archcliffe Road Dover CT17 9EN Printed in the UK BP/65K/1 Ed. Part No 82600

This exciting new series of multifunctional installation testers offers all the tests required for the 17th Edition in one tough, light tester

MFT1700 series multifunction installation tester

Pamela Kinnell

TD Stamp

VALUE FOR MONEY 3 2 NEW PRODUCTS

MFT1700 series multifunction installation testerNow offering 3 and 2 wire non-trip loop test. See page 4

NET200 network qualification testerMeasures the performance of a digital network. See page 33

Don’t miss out!The warranty of many Megger products can be upgraded to three full years free of charge, simply by registering the purchase of the product. So register your product to allow us to offer you full technical support and a free three-year warranty.

Keep in touch with MeggerFollow us on Twitter at www.twitter.com/meggeruk

Watch our videos on YouTube at www.youtube.com/meggeruk

Find us on Facebook at www.facebook.com/meggeruk

Or visit our website at www.megger.com/uk

Home automation is on everybody’s lips, and covers pages of every magazine you read. Control is key. This principle has been established in the industrial and commercial setting. Now it is forging in to the domestic market with the advent of smart metering and the governments insistence that new homes will be carbon neutral in the future.

This more integrated approach to energy usage and management is changing in the way electricians go about their business. Already many new builds are fitted with a CAT 5e network (also known as IEC Class F) usually to make it easy to run a home computer network. But now with introduction of active systems, such as lighting and heating control, energy recovery and smart appliances, the electricians’ world is getting more complex.

Megger has introduced the NET200, an inexpensive network qualification tool that measures the performance of digital networks. For more information see page 33.

The introduction of complexity is always an opportunity; an opportunity for the industry to solve customers’ problems and make money.

Trying to decide which Megger tester is best for you?Why not call the Megger technical desk? They’ll talk through your needs and the way you work and help you make the right decision for your business. Call 01304 502 102

TDR1000/3 series cable fault locatorsRemove the mystery from cable fault location with this easy to use TDR. See page 32

PAT400 series downloading portable appliance testerThe fastest tester in its class. See details on page 20.

Made in UKNetworking is profitable not just social All the 17th Edition and PAT products shown in this catalogue

are engineered and built at our factory in Dover. Megger employs over 300 people at this site all of whom are busy designing, developing, testing and assembling the products that you use.

As a professional electrician, you have a right to demand the very best electrical test equipment. By specifying Megger, not only will you get the best, but you’ll also be supporting a great British success story.

As you are aware, in our industry interruptions in power supply is a major irritation for consumers. That’s why the utility companies have imposed on them a limit to number of customer hours that can be lost. Faults don’t only occur on the HV distribution network, but are common in LV systems, due to broken cables and poor joints. In addition, problems with the mains and waste water pipes are becoming more and more frequent as installations age.

In 2012, Megger acquired the biggest name in fault finding test equipment, SEBAKMT. SEBAKMT brings to Megger unquestionable expertise in the areas of cable condition monitoring, sheath testing and fault location on both HV & LV systems. It has introduced a new range of water leak detection test equipment to the Megger portfolio for the first time.

In addition, the EasyLoc range of buried services and cable avoidance tools now offer a sophisticated solution for tracing a cable route or preparing a site - preventing those expensive mistakes with a digger!

For more information see page 31

Finding faults is big business

The TDR1000/3 was chosen by a panel of independent industry specialists because it simplified the use of time domain reflectometry for fault finding in LV cables. The ease of use of the instrument was paramount in the design criteria and resulted in this low cost solution now being accessible to companies and contractors, who would have previously looked to hire in dedicated fault location specialists.

Innovative test and measurement product of the year

MFT

MFT with

certification

Electrical test kits

Part P kits

Combined loop and

RCD testers

MFT1700 Series

MFT withcertification

Electricaltest kits

Part Pkits

Combinedloop & RCD

testers

Insulationtesters

Industrialinsulation

testers

Looptesters

RCDtesters

PATs

Certificationsoftware

Metertest box

Voltagedetector,

Solar tester

Accessories

Clamp andmultimeters

Earth testers

Services and leak

detectors

Cable fault locator

Network performance

tester

Prices

4 MULTIFUNCTION TESTERS MULTIFUNCTION TESTERS 5

Multifunction testersMFT1700 series

The new MFT1700 series is tough, even tougher than its popular predecessor.It won’t go bang when connected across phases, when it gets dropped or bounced, when it’s used in the rain, when the wrong range is selected or when accidentally connected to live circuits – even with the test locked on!

Dust and rain proof to IP54, the MFT1700 series offers CAT IV safety, meaning that you can use it in any environment without a second thought. To make it more convenient, test buttons are located at either end of the tester meaning you can use the hand that is available to initiate testing, or you can use the new CAT IV probe with test button if you prefer.

Even the carry case has been re-thought. There is now room for not only for the meter and leads, but also a certificate pad, wire cutters and a handful of screwdrivers.

Loop testing rangesn 2 and 3-wire non-trip 0.01Ω L-PEn L-PE 48 V to 280 V, 45 Hz to 65Hzn Won’t trip 6 A MCBsn PFC or PSCC measurement at same time as loop resistancen High current loop testing L–L and L-Nn L-L 48 V to 480 V, 45 Hz to 65Hz dependant on modeln Auto-start loop test

RCD testing rangesn Auto RCD on MFT1720 and MFT1730n RCD ramp test to measure RCD trip currentn Type A, AC, B, Selective, programmable and 3-phase RCDs

dependant on modeln Auto-start RCD test

Continuity and resistance testing range n 200 mA test with an option of 15 mA on MFT1720 and MFT1730n Auto-start continuity testn Easy test lead null– stored even when switched offn Fast buzzer with adjustable threshold on MFT1720 and MFT1730n Resistance measurement from 0.01 Ω to 99.9 kΩInsulation testing rangesn 100 V, 250 V, 500 V and 1000 V dependant on modeln Test voltage displayed with insulation resistance measurementn Adjustable buzzer thresholdn 25 V or 50 V test inhibit optionn Protection against live circuits up to 600 V even when test

lockedon

Voltage, phase rotation and frequency test rangen 10 V – 600 V a.c. / d.c. Trms on MFT1730n Phase rotation on MFT1720 and MFT1730n Frequency measurement 15 Hz to 400 Hzn Touch voltage

Large bright dual parameter displayn Displays test voltage at the same time as insulation resistancen Displays loop resistance and prospective fault currentn Enhanced viewing angle with intelligent backlight

3-pole earth test on MFT1730 n Tests unconnected earth electrode resistance

Communications on MFT1730n Bluetooth downloadingn On-site optionn On-board memory

Rechargeablen Cells rechargeable in situ on MFT1730

Scan with your smartphone

to see a demonstration of the

MFT1700 series or for more go to

bit.ly/MFT1700

Features

Usefully the MFT1700 series has test buttons at both ends of the tester, so there is always one to hand.

Colour-coded selection knobs make sure you are in full control of testing.

Carry case has extra space so you can store tools as well as test leads, and even a certificate pad.

Large brightly backlit display shows 2 parameters at a time like loop impedance and PFC.

Insulation test ranges 1000 V n n

500 V n n n

250 V n n n

100 V n

Test voltage display n n n

Adjustable buzzer threshold n n

Continuity and 200 mA n n n

resistance range 15 mA n n

Easy lead null n n n

Auto-start continuity test n n n

Adjustable buzzer threshold n n n

Loop testing ranges 2-wire no-trip test L-PE n n n

3-wire no-trip test L-PE n n n

PSCC or PFC calculation displayed with loop resistance n n n

L-PE 48 V to 280 V, 45 Hz to 65 Hz n n n

High current 2-wire testing n n n

L-L / L-N 48 V to 480 V, 45 Hz to 65 Hz n n

L-N 48 V to 280 V, 45 Hz to 65 Hz n n n

20 kA fault current n n n

Zmax value n n

Calculated R1 + R2 value n n

RCD Testing range ½I, I and 5I Test n n n

0º + 180º phase angle n n n

Auto RCD testing n n

Ramp test n n n

Type AC, A and S RCDs n n n

Type B RCDs n

Programmable RCDs n n

3-phase RCDs n n

Touch voltage display 0 - 230 V n n n

Voltage frequency and 10 V – 600 V a.c. and d.c. voltage n n n

phase rotation range Trms measurement n

Frequency 15 Hz – 400 Hz n n n

Phase rotation n n

Earth testing 3-pole earth electrode n

25 V and 50 V output voltage n

Ground noise voltage check n

Intelligent safety system Test lockout n n n

Safe contact detector n n n

Live circuit warning n n n

Auto discharge n n n

Additional benefit Analogue arc display n n n

Large, easy-to-read, backlit display n n n

Current measurement with optional clamp n n

Test probe incorporating test button n n

Rechargeable n

FREE calibration certificate n n n

Warranty upgradeable to 3 years FREE n n n

Dust and weatherproof to IP54 n n n

Safety rating CAT IV 300 V CAT IV 300 V CAT IV 300 V

MFT1710 MFT1720 MFT1730

MFT series accessories

1001-9753-wire 10 A fused test lead set

1001-9913-wire lead test set

1001-8103-wire earth electrode test set

1002-490Red, blue and green probes and clips

MFT

MFT with

certification


Part P kits

Combined loop and

RCD testers

MFT1700 Series


Electricaltest kits

Part Pkits

Combinedloop & RCD

testers

Insulationtesters


testers

Looptesters

RCDtesters

PATs


Metertest box

Voltagedetector,

Solar tester

Accessories


Earth testers

Services and leak

detectors

Cable fault locator

Network performance

tester

Prices

ELECTRICAL TEST KITS 7 6 MULTIFUNCTION TESTER

Multifunction tester with certification softwareMFT1730 On-site kit

This is the ultimate installation testing package, with every-thing you need in one tough easy to use kit, 2 and 3-wire non-trip loop testing, RCD testing, insulation and continuity testing with resistance measurement, the MFT1730 adds True rms voltage measurement, frequency indication and phase rotation. It even includes 3 pole earth testing to make the kit complete.

It won’t go bang when...

n connected across phases

n it gets dropped

n used in the rain

n accidently testing live circuits

n selecting the wrong test range

The complete on-site testing kit includes all you need

n 2-wire non-trip loop testingn 3-wire non-trip loop testingn Fast 2-wire high current loop testingn Insulation testingn Continuity and resistance

measurementn Single and 3-phase RCD testingn 3 pole earth electrode testingn True rms voltage and frequency

measurementn Phase rotationn Test results storagen PowerSuite On-site certification

software n Rechargeable batteries

Accessories

ICLAMP100 A current clamp

Electrical test kitsMTK 300 seriesMegger MTK300 test kits give electrical contractors all they need to perform electrical inspection and testing for single and three phase operations. The kits consist of three instruments, an MIT insulation tester, an LTW 2-wire non-trip earth loop tester and an RCDT residual current device tester, each with batteries fitted, in a smart case, with a full set of test leads and calibration certificates. Three kits are available: MTK310, MTK320 and MTK330.

MTK310 MTK320 MTK330

In a scene reminiscent of a James Bond movie, an aluminium flight case recently came flying from the window of a speeding van on the M69 motorway. The case contained the latest in electrical testing technology, in the form of a Megger MTK320 electrical contractors’ test kit that had been stolen from a vehicle belonging to a leading electrical training provider.

Despite a rough landing at speeds close to 70 mph, the three testers that make up the kit survived their ordeal completely unscathed. A thorough check in the Megger calibration laboratory showed that none of the instruments needed even the slightest of adjustments.

Now that’s what we call tough!

MTK310: Standard electrical test kit

n MIT310 Insulation and continuity tester

n LTW315 Earth loop tester

n RCDT310 RCD tester

MTK320: Advanced electrical test kit

n MIT320 Insulation and continuity tester with insulation and continuity limit alarms

n LTW325 Earth loop tester with R1+R2 and Zmax measurement

n RCDT320 RCD tester with Programmable RCD testing capability

MTK330: Result storage and downloading test kit

n MIT330 Insulation and continuity tester as MIT320 but with storage and downloading

n LTW335 Earth loop tester as LTW325 but with storage and downloading

n RCDT330 RCD tester as RCDT320 but with storage and downloading

For more information go to

bit.ly/MFT1730OS


bit.ly/MTK300

And because you asked for it, the MFT1730 is a rechargeable instrument. Megger has changed the MFT options on result storage and downloading. The MFT1730 offers you both On-site certificate filling by sending your current result to a storage device, smart-phone, PDA, notebook or laptop, there and then on site, or the ability to store the results of your tests to download to your computer off site. The MFT1730 uses Bluetooth technology to communicate because it’s fast, effective and there are no additional leads to store.

The MFT1730 On-site not only incorporates the form filling software, but also includes the 3 pole earth resistance testing kit, making it the best-value electrical testing package on the market.

MFT

MFT with

certification


Part P kits

Combined loop and

RCD testers

MFT1700 Series


Electricaltest kits

Part Pkits

Combinedloop & RCD

testers

Insulationtesters


testers

Looptesters

RCDtesters

PATs


Metertest box

Voltagedetector,

Solar tester

Accessories


Earth testers

Services and leak

detectors

Cable fault locator

Network performance

tester

Prices

Insulation testing (see pages 10 and 11 for technical data) MIT310 n

MIT320 n

MIT330 n

Loop testing (see pages 14 and 15 for technical data) LTW315 n LTW325 n

LTW335 n

RCD testing (see pages 16 and 17 for technical data) RCDT310 n RCDT320 n

RCDT330 n

Rubber armoured n n n

Weatherproof to IP54 n n n

Test leads included n n n

Calibration certificates included n n n


Batteries included n n n

Smart brief case n n n

8 PART P KITS COMBINED LOOP AND RCD TESTERS 9

Part P kits PPK200 seriesPPK210

Comprises the MIT310 insulation and continuity tester which tests at 250 V, 500 V and 1000 V, and the LRCD210 Loop and RCD tester. The kit comes complete with test leads, carry and storage case and free calibration certificates.

The MIT310 insulation tester and LRCD210 loop and RCD tester will take the bashing that testers receive when they are on site. They are rubber armoured, and have an integral solid lid to cover the display.

Choose the PPK210 Part P kit to certify an installation to Part P of the Building Regulations. The included MIT310 insulation tester provides all required insulation test voltages, enabling testing of SELV and PELV circuits at 250 V d.c. and standard installation wiring at 500 V d.c.

PPK220

Comprises the MIT320 insulation and continuity tester and the LRCD220 Loop and RCD tester. PPK220 gives you all the capability of the PPK210 and adds extra functionality.

How it worksThe separation of live and dead testing that you find with the PPK test kits is really helpful if electrical testing is not your main line of business.

Selecting the tester for live circuits reminds you of the safety implications of working with live circuits. Meanwhile you know you are working with the best when you insulation test with a Megger tester.

Special features on all testersn Thick rubber armoured case

n Clear colour coded ranges

n Large easy to read displays

n Super grip test leads with lock on croc clips

n Tough

n Easy to use

n 3-phase safe

n Weatherproof

n Hands free testing

n Hard carry case

MIT320 insulation and continuity tester

n Buzzer disablen Continuity limit alarmn Insulation limit alarmn Frequency measurementn Resistance measurementn Backlit displayn Backlit rangesn Remote switch probe

LRCD220 Loop and RCD tester

n Auto RCD testingn 1000 mA RCD test capabilityn Phase to Phase loop testingn Phase rotation display


bit.ly/PPK200

Combined loop and RCD testersLRCD200 series

Loop test Non tripping loop test n n

PFC calculation and display n n

Single phase testing n n

Phase to phase testing n

High current loop test n

3 phase safe n n

Voltmeter n n

RCD test 1⁄2 x I test n n

1 x I test n n

5 x I test n n

Touch / contact voltage display n n

Selectable 25/50 V touch voltage n n

10, 30,100, 300, 500 mA ranges n n

1000 mA n

A, A selective, AC and AC selective RCD tests n n

Automatic RCD testing n

Selectable phase 0/180 n n

Ramp test (20 % to 110 %) n n

General test Frequency n n

Phase rotation n

Backlight n

Working voltage 230 V n n

Working voltage 110 V and 230 V n

Free calibration certificate n n

Dust and weather proof to IP54 n n

Warranty upgradeable to 3 years FREE n n

LRCD210 LRCD220

Both LRCD210 and LRCD220 testers offerLoop testing

n Non-tripping 3 wire low current loop test provides measurements from 0.01 Ω to 2 kΩ

n RCDs and RCBOs rated at 30 mA or less are not tripped when loop impedance testing

n High current 2-wire fast loop test (LRDC220 only)n 415 V Phase to phase loop measurement (LRCD220 only)n Auto-ranging testsn PFC button shows calculated PFC/PSCC result without re-testingn Supply voltage displayed on connection to circuitn Supply frequency measurement

RCD testing

n 10 mA to 500 mA RCD testing, 1000 mA on LRCD220n 1⁄2 I, 1 x I, 5 x I RCD testn Tests Type A, A Selective, Type AC & AC Selectiven 0°/180° selectionn Ramp testingn 25 V or 50 V Touch voltage selectionn Optional Touch voltage display

LRCD series accessories

1001-883 3-wire in to 1 plug test lead set

6220-740UK mains test lead set

1001-977 2-wire 10 A fused test lead set

1001-976 2 wire test lead set


bit.ly/LRCD200

The LRCD200 series is the latest generation of combined non-tripping loop test and RCD test instruments. They provide simple, affordable and flexible test tools for electrical contractors testing energised circuits. The instruments are supplied with a free Megger calibration certificate.

n Safety interlock to prevent unsafe connection of the test leads

n PFC calculation and display

n 3 phase safe – even when connected across phases, both you and the tester will remain safe

n Touch voltage limits and indication

MFT

MFT with

certification


Part P kits

Combined loop and

RCD testers

MFT1700 Series


Electricaltest kits

Part Pkits

Combinedloop & RCD

testers

Insulationtesters


testers

Looptesters

RCDtesters

PATs


Metertest box

Voltagedetector,

Solar tester

Accessories


Earth testers

Services and leak

detectors

Cable fault locator

Network performance

tester

Prices

PPK210 PPK220

Insulation testing (see pages 10 and 11 for technical data) MIT310 n

MIT320 n

Loop and RCD testing (see page 9 for technical data) LRCD210 n

LRCD220 n

Megger calibration certificate n n

Full set of test leads n n

Instrument and document carry case n n

Batteries included n n


INSULATION TESTERS 11

Special featuresn Thick rubber armoured case

n Clear colour coded selectors

n Large, easy to read display

n Super grip test-leads with lock on croc clips

n Auto-start continuity test

n Tough and easy to use

n Safe

n Weatherproof

n USB downloading on MIT330

The Megger insulation testers will take the bashing that testers receive when they are on site

They are rubber armoured and have an integral solid lid to protect the display.

The heavy-duty hinge allows the lid to be locked away beneath when in use, making it easy to use and impossible to lose.

And you don’t need to pull out the test leads to shut the lid.

The Megger MIT insulation testers are easy to use and quick to learn

There are no buried functions, so it is easy to use these insulation testers.

The colour coding helps test selection, speeding up testing time and helping you identify faults fast.

The quick start guide in the lid keeps all the basic information at hand if you need it.

Insulation and continuity testers MIT300 series

The Megger insulation testers are like no other tester you have used

Your safety is Megger’s number one concern

These safety features look after you and the tester –

n Safety interlock to prevent unsafe connection of the test leads

n Safe contact detector keeping you and your tester safe during continuity testing if it’s accidentally connected to a live circuit

n Live voltage warning alerts the user to a circuit voltage over 25 V when insulation testing

n Safety lockouts –

– Prevents continuity testing on live circuits

– Prevents insulation testing when circuit voltage is greater than 50 V

Hands free operation

MIT300 series insulation testers are well balanced to hang comfortably around your neck enabling hands free operation when you need it.

The continuity test and buzzer start automatically when you connect to a circuit, saving you time.

Insulation tests can be started using a switched probe or the test button on the front of the tester.

MIT320 comes with switched probe and calibration certificate

How it worksThe best place for a test button is on the probe.

By using a switched probe rather than a standard one there is no longer a need to look away from the probe to find the TEST button on the instrument, or use a third hand if both are already holding the probes. Simply press the button already under your finger.

Definitely safer and quicker.

10 INSULATION TESTERS

Handy neck strap for hands free operation

Double hinge keeps screen free from scratches or swings under to snap out of sight

Shutter to prevent hazardous lead combinations

Clear range selector for poor light conditions


1002-491 Red and black probes and clips

1001-884 Remote switched probe with special plug

1002-015 2-wire 500 mA fused test lead set

Insulation testing 250 V n n n n n

500 V n n n n n

1000 V n n n n

Test range 1000 MΩ 1000 MΩ 1000 MΩ 1000 MΩ 1000 MΩ

Insulation limit alarm 0.01 MΩ to 1000 MΩ n n

Continuity testing Continuity to 100 Ω n n n n n

Continuity buzzer n n n n n

Lead null to 9 Ω n n n <1⁄2 Ω n

Adjustable buzzer 1 to 100 Ω n n

Audible buzzer disable n n

Voltage measurement Volts AC/DC 600 V 600 V 600 V 600 V

Resistance measurement 10 Ω to 1 MΩ range n n

10 Ω to 2 KΩ range n

Features Voltage warning n

Default voltmeter n n n n

Backlit display n n

Backlit selector ranges n n

Locking test button n n n n n

Auto power-down n n n n

Switched test probe n n

Data storage n

Download via USB port n

IP54 weatherproof n n n n n

Accepts rechargeable batteries n n n n n

Included accessories 2 wire lead set n n n n n

Free calibration certificate n n n n

Warranty upgradeable to 3 years FREE n n n n n

MIT300 MIT310 MIT320 MIT310A MIT330 Analogue

Tough lid prevents damage to the display

Features

MIT series accessories


bit.ly/MIT300

See page 12 and 13 for our industrial insulation testers

MFT

MFT with

certification


Part P kits

Combined loop and

RCD testers

MFT1700 Series


Electricaltest kits

Part Pkits

Combinedloop & RCD

testers

Insulationtesters


testers

Looptesters

RCDtesters

PATs


Metertest box

Voltagedetector,

Solar tester

Accessories


Earth testers

Services and leak

detectors

Cable fault locator

Network performance

tester

Prices

INSULATION AND CONTINUITY TESTERS 13 12 INSULATION AND CONTINUITY TESTERS

Insulation and continuity testersMIT200 seriesMIT220 and MIT230 are two of the smallest insulation testers availableBoth products have a combination of digital readout and analogue display, using Megger’s patented DART display technology. The display includes a clear, accurate digital read-out, and an analogue pointer response for evaluating circuit charge and discharge characteristics.

The tough ABS instrument housing is designed to withstand the rigours of hard use, whilst small enough to drop into your pocket when not in use. A low battery warning indicator gives advanced warning of exhausted batteries.

250 V and 500 V test ranges to 1000 MΩ n

250 V, 500 V and 1000 V test ranges to 1000 MΩ n

Continuity (200 mA) measurement n n

Voltage detection n n

Intelligent safety system n n

Fast buzzer range n n

Display backlight n n

CATIII 600 V n n

IEC61010 n n


MIT220 MIT230

Continuity testing

n Automatic continuity testing is performed at 200 mA to ensure compliance with international requirements. No need to press the test button

n All instruments will measure up to 100 Ω on continuity, of which 0-10 Ω is performed at greater than 200 mA

n Lead null is possible up to 9.99 Ω ensuring the ability to null fused test leads as well as standard leads

n Voltage protection should you touch a live circuitn Continuity buzzer provides a means of rapid cable testing

and circuit identification, with voltage protection should you accidentally touch a live circuit

n The buzzer operates at a 5 Ω threshold

Insulation testing

n There is a choice of two or three test voltage ranges providing an ideal solution to most low voltage insulation testing applications

n Insulation measurement up to 1000 MΩ on all rangesn Auto discharge ensures all circuits are safely discharged after

testingn 1000 V insulation test ranges have a high voltage warning

prior to test voltage being applied

Special featuresn Exceptional value for money

n Pocket sized tester

n Live circuit protected

MIT200 series accessories



MIT400 seriesInsulation testing

n 50 V to 1000 V insulation test voltages available with resistance to 200 G Ω

n Unique 10 V to 100 V variable voltage tester (MIT40X)n Test lock - Locks insulation test onn Actual test voltage is displayed as well as insulation result

simultaneouslyn Analogue arc replicates the response of a moving coil displayn Polarisation Index (PI), Dielectric Absorption Ratio (DAR) and

timer functions on most modelsn Silicone leads prevent errors on high G Ω rangesn Test inhibit prevents insulation testing if voltages in excess of 50

V or 75 V on telecoms testers are present. Live circuit detection and protection

n Insulation buzzer - Preset the buzzer to an insulation resistance limit from the setup menu

Insulation and continuity testers for industrial maintenance and telecommunications

250 V, 500 V and 1000 V insulation test n n n n n n

50 V and 100 V insulation test n n n n n n

10 V , 25 V, 250 V and 500 V insulation test n

10 V to 100 V in 1 V steps n

Resistance to 20 GΩ 100 GΩ 50 GΩ 200 GΩ 200 GΩ 20 GΩ 100 GΩ 200 GΩ 200 GΩ

Continuity 0.01 to 200 Ω n n n n n n n n n

Live circuit warning 50 V 50 V 50 V 50 V 50 V 50 V 75 V 75 V 75 V

Polarization Index PI n n n n n n

Dielectric absorption rate DAR n n n n n n

Frequency measurement n n n n n n

Capacitance measurement n n n n

Distance by capacitance n n

Data storage n n n n

Bluetooth downloading n n

Safety CATIV 600 V CATIV 600 V CATIV 600 V CATIV 600 V CATIV 600 V CATIV 600 V CATIV 600 V CATIV 600 V CATIV 600 V

FREE calibration certificate n n n n n n n n n

Warranty upgradeable to 3 years FREE n n n n n n n n n

MIT400 MIT410 MIT415 MIT420 MIT430 MIT40X MIT480 MIT481 MIT485

Industrial maintenance insulation and continuity testers

Telecommunications insulation and continuity testers

Scan with your smartphone to see a demonstration of the MIT400 series

or for more

information go to

bit.ly/MIT400


bit.ly/MIT200

MIT400 series accessories


1001-878 Switched CATIV 600 V probe


1002-491Red and black probes and clips

Continuity testing

n Auto test on contact enables real two handed operationn A choice of 200 mA or 20 mA continuity test currents to increase

battery lifen Lead null - up to 9 Ω of resistancen Buzzer - ON-OFF selected by simple push buttonn Buzzer limit adjustable from 1 Ω to 20 Ω in 5 steps

Special featuresn CATIV 600 V

n TRMS voltage measurement

n PI, DAR and timer measurement and timer modes

n Remote switched probe

MFT

MFT with

certification


Part P kits

Combined loop and

RCD testers

MFT1700 Series


Electricaltest kits

Part Pkits

Combinedloop & RCD

testers

Insulationtesters


testers

Looptesters

RCDtesters

PATs


Metertest box

Voltagedetector,

Solar tester

Accessories


Earth testers

Services and leak

detectors

Cable fault locator

Network performance

tester

Prices

Special featuresn Uses only two wires to loop test

n Will not trip RCDs while loop testing

n Will not take out 6 A MCBs

n Clear easy to read display

n 3-phase safe

n 50 V to 480 V operation

n PFC display

n Stable test results

n USB downloading on LTW335

n Max Z facility, not on LTW315

n Calculated R1 + R2, not on LTW315

14 LOOP TESTERS LOOP TESTERS 15

LTW series 2 wire testing

The loop test is performed with only 2 test leads. This can be either:n Phase to Earthn Phase to Neutraln Phase to Phase (depending on model)Testing is simple. There is no need for a third wire which could cause confusion in identifying the part of the circuit under test.

Non-trip loop testing

LTW series testers do not trip working RCDs or RCBOs of 30 mA or greater, using the non-trip loop test.

Noise detection on non-trip tests

LTW uses sophisticated noise detection circuitry which continually monitors the supply during a loop test to ensure the accuracy of the result has not been affected by electrical noise from plant and services.Two operational modes are available:a) Performs a 10 second test and if noise is detected a warning

is displayed.b) Automatically extends a test to improve the accuracy.

High current loop testing

For supplies that are not RCD protected the high current test can be used, as there is no risk of tripping the RCD.

Auto start

An auto-start function will start the test as soon as the circuit voltage is detected, removing the need of a third hand and allowing for much faster testing.

2-wire non-tripping loop testers

The popular LTW325 comes complete, ready for work

Three-phase safe

The instruments will operate from 50 v phase to earth, up to 440 v phase to phase.

High resolution test

LTW425 offers a high current, high resolution loop test to three decimal places (0.001 Ω).

PFC Display

All instruments can calculate PFC and PSCC up to 20 kA and the LTW425 can calculate up to 40 kA using the 0.001 high current, resolution test range.

Loop testing 2-wire non-tripping loop testing n n n n

2-wire high current, fast, loop testing n n n n n

110 V to 280 V applications n n n n

50 V to 440 V applications n n n n n

50 V to 550 V applications n

Phase to phase testing n n n n

PFC range 20 kA n n n n n

PFC range 40 kA n Resolution 0.01 ohm n n n n n

Resolution 0.001 ohm n Automatic noise detection n n n n

Automatic test start n n n n n

Frequency measurement n n n n n

16 Hz to 400 Hz operation n

Max Zs display n n n

Calculated R1 + R2 display n n n

Features Back lit display n n n n Built-in fold away cover n n n n n

Quick start guide in cover n n n n n

Test result storage n Downloading of test results n Accepts rechargeable batteries n n n n n

Included accessories Storage and carry case n n n n n

2-wire lead set complete with crock clips n n n n Optional Mains socket lead set n n n n Optional Free calibration certificate n n n n

Standards IEC61010-1 CATIV 300 V n n n n n

EN61557 n n n n n

Weather- and dust-proof to IP54 n n n n n

Warranty upgradeable to 3 years FREE n n n n n

LTW315 LTW325 LTW335 LTW425 LT300

High current loop testerLT300The LT300 offers high current loop testing over a wide range of frequencies and supply voltages with simple, fast, two wire operation.

Frequency range

Supply frequency is indicated upon connection and the LT300 will automatically set to the supply frequency either 16 Hz, 33 Hz, 50/60 Hz, 125 Hz or 400 Hz. Testing will commence automatically.

Loop measurement

Two loop impedance ranges are provided.20 Ω - Resolution to 0.01 Ω200 Ω - Resolution to 0.1 Ω

Supply voltage

Operational supply range extends from 50 V to 550 V (400 V @ 16 Hz), with a warning for voltages over 330 V highlighting accidental phase to phase connections on a nominal 230 V system.

LT300 series accessories


6220-810 UK mains test lead set


Special featuresn High current loop testing

n Wide range of frequencies

n Wide range of supply voltages

n CATIV 300 V


bit.ly/LTW_series


bit.ly/Megger_LT300

MFT

MFT with

certification


Part P kits

Combined loop and

RCD testers

MFT1700 Series


Electricaltest kits

Part Pkits

Combinedloop & RCD

testers

Insulationtesters


testers

Looptesters

RCDtesters

PATs


Metertest box

Voltagedetector,

Solar tester

Accessories


Earth testers

Services and leak

detectors

Cable fault locator

Network performance

tester

Prices

16 RCD TESTERS RCD TESTERS 17

RCD testing 1⁄2I, 1I, 5I RCD trip time test n n n

Selective breakers n n n

Type A and AC breakers (1⁄2I, 1I, 5I) n n n

Programmable RCD n

30, 100, 300, 500 mA RCDs n n n

10, 1000 mA RCDs n n

RCD trip current test (RAMP) n n

Auto RCD test n n

0°/180° polarity selection n n n

Touch voltage selectable n n n

Max touch voltage (25 V/50 V) n n n

Operating range 100 to 280 V n Operating range 50 to 280 V n n

Features 3-Phase safe n n n

Large clear display n n n

Backlight n n

Battery status indication n n n

Auto power down n n n

Fuse blown indication n n n

Data storage n

Download via USB port n

IP54 weatherproof n n n

IEC61010-1 CATIII 300 V n n n

EN61557 n n n

Accessories included UK mains test lead n n n

2 wire test lead with probes and clips n n


Free calibration certificate n n n

RCDT310 RCDT320 RCDT330

Your safety is Megger’s number one concern

These RCD testers have built in safety features to look after you and the tester –n Safety interlock to prevent unsafe connection of the test

leadsn Test inhibit, if the supply voltage exceeds 280 Vn 3 phase safe – even when connected across phases, both you

and the tester will remain safen LED connection indicators display correct test lead

connection, making sure it is right first time

Megger RCD testers are so easy to use and quick to learn

n There are no buried functions, so they are easy to use n The colour coding helps test selection, speeding up testing

time and helping you identify faults fastn The quick start guide in the lid keeps all the basic

information at hand when you need it

RCD testersRCDT300 series The Megger RCD testers provide the full solution to RCD testing

The RCDT tests not only Type A and Type AC RCDs, but also the selective (time-delayed) variants of both types, performing 1⁄2I, 1I and 5I tests on RCDs rated at 30 mA, 100 mA, 300 mA and 500 mA tested at 0° or 180°.The RCDT320 offers additional tests for RCDs rated at 10 mA and 1000 mA.Touch voltage is measured at the start of a test, and will automatically inhibit if it exceeds the preset level.Touch voltage inhibit is selectable from 25 V to 50 V.

Save your valuable time

RCDT320 offers additional time saving features.Auto RCD testing – RCDT320 will automatically cycle through the 1⁄2I, 1I and 5I tests at 0° or 180° recording the results, so you can stay with and reset the RCD. This means the job gets done faster, saving not only your time but your legs as well!Ramp testing to measure the trip current of an RCD – the test current is slowly increased from 1⁄2I to 1I+10%. The trip current is held on the display, making it quicker and easier to diagnose nuisance tripping.RCDs on 110 V (55 V - 0 - 55 V) centre tapped site supplies can be tested by the Megger RCDT320 due to its wide operating voltage range of 50 V to 280 V.

How it worksUse the ‘ramp test’ to identify nuisance tripping RCDs.

An overly current sensitive or faulty RCD can cause nuisance tripping of the RCD, which can be very difficult to locate. A current clamp meter is not fast enough. By testing with a ramp test, the test current is slowly increased until the RCD trips. The tester displays the trip current in milliamps (not the trip time). If this is too low, replace the RCD.

RCDT testers come complete with calibration certificate in a tough carry case

FeaturesSpecial featuresn Thick rubber armoured case

n Clear LED polarity indicator

n Large, easy to read display

n Super grip test-leads with lock on croc clips

n Tough

n Easy to use

n Safe

n Weatherproof to IP54

n Hands free auto-RCD testing

n USB downloading on RCDT330

RCDT300 series accessories

6220-740UK mains test lead

1002-490Red, blue and green probes and clips



Megger RCD testers will take the bashing that testers receive when they are on site

They are rubber armoured and have an integral solid lid to cover the display.The lid has a heavy-duty hinge that locks away underneath when in use, making it easy to use and impossible to lose.And you don’t need to pull out the test leads to shut the lid.

Heavy duty hinge locks away underneath

Clear range selector for poor light conditions

Clear LED polarity indicators help you get the right wiring and test lead connection

Shutter mechanism makes it easy to use the right leads


bit.ly/RCDT300

MFT

MFT with

certification


Part P kits

Combined loop and

RCD testers

MFT1700 Series


Electricaltest kits

Part Pkits

Combinedloop & RCD

testers

Insulationtesters


testers

Looptesters

RCDtesters

PATs


Metertest box

Voltagedetector,

Solar tester

Accessories


Earth testers

Services and leak

detectors

Cable fault locator

Network performance

tester

Prices

PORTABLE APPLIANCE TESTERS 19 18 PORTABLE APPLIANCE TESTERS

Portable Appliance TestersPAT300 seriesA choice of two fast PAT testers which offer the operator manual and automatic operation without the complexity of data storage. The PAT300 series allows the user to select a range of tests, such as those for a CLASS I asset, simply by pressing the “CLASS I“ button, and then initiate the test by pressing the “TEST” button. When the results are displayed they are coded green for a pass and red for a fail. However, if a particular test needs to be repeated, there are direct access buttons dedicated to specific tests. The instant-restart feature speeds testing when moving from one room to another, re-starting in exactly the same menu location where it was left.

PAT320 is the PAT tester for those electricians who occasionally do testing and don’t want the complexity of database management and are happy to write out certificates by hand.

PAT350 is similar to the PAT320 but with the added benefit of flash testing. Because of its high through-put capabilities and the speed at which it gives results, it is ideal for applications such as tool hire companies and service centres.

Of particular interest to tool hire companies, as well as service and repair organisations, is the PAT300 series ability to run high current bond tests virtually continuously, without the fear of the tester over heating.

Special featuresn Full PAT functionality with the

option of flash test

n Automatic or manual testing

n Continuous operation

n Full plug-in or lead mounted RCD testing

n Simple push button control

n Instant re-start n 200 mA “soft” bond test and the option of high current 25

A and 10 A bond tests n Test lead null n Flash testing at a choice of 1.5 kV or 3 kV (PAT350 only)n Repeated high current bond testing possible n Insulation testing at 250 V and 500 V n Fully tests 230 V and 110 V appliances n Extension and IEC lead testing, including polarity, earth

continuity, L-N continuity and L-N-E insulation n Standard differential leakage testn Protective conductor or touch current

leakage test n Substitute earth leakage test at

40 V a.c. n Full plug-in 30 mA RCD testing

½ x I, I, 5 x I n Integral fuse checker

Scan with your smartphone to see a demonstration of the PAT300 series or for more information go to

bit.ly/PAT300

Accessories

1000-766 110 V mains lead adaptor

1000-767 415 V 4 pin adaptor lead to BS1363

1001-227 Fail label roll of 1000

1000-971 Pass label roll of 1000

PATR210 Portable appliance test report book

Earth bond test 25 A n n n n

10 A n n n n

200 mA n n n n

Insulation test 500 V n n n n

250 V n n n n

Earth leakage test Differential n n n n

Touch current n n n n

Substitute n n n n

Operation test 110 V n n n n

230 V n n n n

Flash n

Automatic tests sequence Class I n n n n

Class II n n n n

Extension test lead n n n n

Portable RCD n n n n

Fuse test n n n n

Test lead null n n n n

Operates at 110 V n n n n

230 V n n n n

Functional test VA measurement 110 V n n n n

230 V n n n n

Test sockets BS1362 n n n n

BS4343 n n n n

On-board client/locations results database n

Download to USB memory stick n

Display Colour 1⁄8 VGA n n n

Colour 1⁄4 VGA n

Combined continuity, earth bond and insulation test lead n n n n

230 V extension lead adaptor n n n n

FREE calibration certificate n n n n

PC power supply to IEC adaptor n n

Pass labels n n

Portable appliance test report book n

PowerSuite Professional Contractor PAT certification software with client and n

asset management and billing

Megger guide to PAT testing n n

Megger guide to marketing a PAT business n n

Barcode reader optional

Barcode printer optional

PAT320 PAT350 PAT320 PAT420in a box Business in a box Business in a box

Business in a boxWhy diversify your business into PAT Testing?Because the PAT testing market is driven by the “Electricity at Work” regulations and not by the economy, there is an excellent opportunity to boost your turnover by introducing a PAT testing and repair service.

To make it easier for you to change direction, Megger has introduced the “Business in a box”. This is a new concept in electrical test products, not just selling you the tester but helping you find business.

Many customers have found these pre-packed businesses useful in making money again in the teeth of the recession.

There are two potential businesses in a box, the PAT320 manual version, and the PAT420 computerised version.

In the box you will find everything you need to diversify the direction of your business and boost your income.

1. Tough PAT tester that will give you years of service

2. Leads and adaptors you need to do the job successfully

3.1 The PAT320 comes with duplicate test report book for users to certify results and issue to their customer

3.2 The PAT420 come with PowerSuite Contractor PAT certification software to manage:

Customers Assets n Arrange appointments nAutomatic testing

n Diary management n Printing certificates

n Billing n Repairs estimates

4. Roll of 1000 pass labels

5. A guide to PAT testing – clear step by step instructions on how to do it

6. A guide to identifying customers and selling to them. This includes

n Where to find and how to approach clients

n Details of who, and why they need to be testing their electrical assets

n Guidelines on what to charge

n Pre-designed advert and brochure for you to customise

n Pre-written press releases for you to generate interest

n Pre-written letters for you to send to your potential customers

Scan with your smartphone to see a presentation of the PAT business in the box or for more information go to

bit.ly/PAT320_BIABbit.ly/PAT420_BIAB

MFT

MFT with

certification


Part P kits

Combined loop and

RCD testers

MFT1700 Series


Electricaltest kits

Part Pkits

Combinedloop & RCD

testers

Insulationtesters


testers

Looptesters

RCDtesters

PATs


Metertest box

Voltagedetector,

Solar tester

Accessories


Earth testers

Services and leak

detectors

Cable fault locator

Network performance

tester

Prices

PORTABLE APPLIANCE TESTERS 21 20 PORTABLE APPLIANCE TESTERS

Supply 230 V n n n

110 V n n

Supply measurement n n n

Earth bond/continuity 200 mA n n n

10 A n n

25 A n n

Bond lead null n n n

Insulation test 250 V n n n

500 V n n n

Alternative leakage tests Substitute n n n

Differential n n n

Touch current n n n

Functional test VA measurement n n n

Extension lead tests Earth bond n n n

Insulation n n n

Polarity n n n

Portable RCD tests n n n

Flash test 1.5 kV and 3.0 kV n

Other features Low-profile light weight n

110 V test connection n n

Auto test routine n n n

Manual testing n n n

Configurable tests times n n n

Selectable pass limits n n n

Fuse check n n n

Large colour display n n n

Data handling 10,000 record on-board storage n n n

Download to USB memory stick n n n

PowerSuite compatible n n n

Supplied accessories Carry case with lead storage pouch n n n

Combined continuity, earth bond and insulation test lead n n n

Red extension lead adaptor n n n

Flash test lead n

FREE calibration certificate n n n

PAT410 PAT420 PAT450

Special featuresn Expert mode to speed up

testing

n Secure user log-in option

n Vast on-board memory to keep you on the job longer

n Continuous operation, no need to stop and wait for the tester to cool down

n Instant re-start as you move from room to room

n Soft keys to speed you through the testing process

n Automatic asset number generation

n Quick test for instant access to single test functions

Portable Appliance TestersPAT 400 seriesThree PAT testers with full database functionality based on the well received PAT300 series. The PAT 400 series introduces a new level of convenience and speed to PAT testing using on-board test results storage.

With a large, bright and intuitive colour display, the PAT400 series offer sufficient memory for the storage of up to 10,000 assets. The proven long duty cycle, the simplicity of operation and the independently verified speed of test make for the best selling PAT Megger has ever produced.

The menus have been simplified to make operation quicker. Five soft-keys give direct access to frequently used functions making navigation through the menus quick and the tester more productive, offering a greater return on investment. A new feature is the expert and novice modes making testing even faster for experienced user.

For corporate users, the PAT400 series now has an optional security log-in for controlling access to test parameters and limits, while logging the active user within the results database.

Using a standard USB memory stick, results can be quickly backed up for downloading. The asset database is accessible from the tester and with a full QWERTY keyboard, rapid data entry or adjustment is possible.

PAT410 is perfect for those happy to bond test solely at 200 mA. The smallest and lightest of the PAT400 series weighs only 2.7 kg.

PAT420 tests both 100 V and 230 V appliances, as well as offering bond testing at all three test currents, 200 mA, 10 A and 25 A. This is the tester of choice for full-time industrial or commercial PAT testers.

PAT450 adds in the ability to carry out high voltage flash testing at 1.5 kV or 3.0 kV, making it the preferred choice for tool hire companies and service and repair workshops.

n 10,000 asset on-board data storage n Large easy to ready colour screen n Instant re-start n 25 A, 10 A and 200 mA “soft” bond testn Test lead null n Repeated high current bond testing possible n Insulation testing at 250 V and 500 V n Functional VA load test for 110 V and 230 V appliancesn Extension and IEC lead testing including polarity, earth

continuity, L-N continuity and L-N-E insulation n Standard differential leakage test plus n Protective conductor or touch current leakage test n Substitute earth leakage test at 40 V a.c. n Simple RCD test or full 30 mA RCD testing ½ x I, I, 5 x In Integral fuse checker

PAT400 series accessories

1000-770 415 V 5 pin adaptor lead to BS1363 (16 A)

6220-639 110 V extension lead adaptor

1000-766 110 V mains lead adaptor

1001-046 Pass / fail barcode printer

1000-767 415 V 4 pin adaptor lead to BS1363

1001-047 Barcode scanner

1001-227 Fail label roll of 1000

1000-971 Pass label roll of 1000

Scan with your smartphone to see a demonstration of the PAT400 series or for more information go to

bit.ly/Megger_PAT400

For PAT420 Business in a box

see page 19

*Testing conducted by Redford Charles Ltd, Rochester,

see details atwww.redfordcharles.com/resources/

PAT_tester_analysis.pdf”

Independent tests* show the Megger PAT400 is at least 8% more productive

MFT

MFT with

certification


Part P kits

Combined loop and

RCD testers

MFT1700 Series


Electricaltest kits

Part Pkits

Combinedloop & RCD

testers

Insulationtesters


testers

Looptesters

RCDtesters

PATs


Metertest box

Voltagedetector,

Solar tester

Accessories


Earth testers

Services and leak

detectors

Cable fault locator

Network performance

tester

Prices

See how to PAT test the Megger way

with PAT testing and inspection DVD

order no 1002-384

Continuity short circuit test current >200 mA >200 mA

Pass / fail indication

Continuity test voltage range 4 V – 24 V 4 V - 24 V


Continuity resistance 0.5 Ω

5.0 Ω

Insulation test current 1 mA 1 mA


Insulation test voltages 250 V +25% max 250 V +25% max

500 V +25% max 500 V +25% max

1 kV +25% max 1k V +25% max

Pass / fail Indication

Insulation test resistances 0.25 MΩ min 0.25 MΩ

0.5 MΩ min 0.5 MΩ

1 MΩ min 1 MΩ

9 MΩ

90 MΩ

Loop Local mains impedance

Loop + 10 Ω Loop + 10 Ω

Loop + 180 Ω 200 Ω max Loop + 180 Ω

(IEE On-Site Guide

10.3.5 Earth Electrode Resistance)

RCD currents (I) 10 mA, 30 mA and 100 mA

RCD no trip (1⁄2I) No trip >1999 mS

RCD (I) <200 mS 40 mS @ 0°

50 mS @180°

RCD (5 x I) <40 mS 10 mS @ 0°

20 mS @ 180°

BS7671, BS EN61557 and MTB7671 IEE On-Site Guide parameters tested tester requirements

22 TEST CERTIFICATION SOFTWARE METER TEST BOX 23

Certificate manager including IET, NICEIC, ECA, Select, ELECSA n n n n n n

Certificate audit trail n n n n n n

Client manager n n n n n n

Wizard and menu functions n n n n n n

Company logo import n n n n n n

Document storage including Word, Excel, pdf and many more n n n n n

Photo import n n n n n n

Image management n n n n

Organiser n n n n

Identify missing assets n n n n

Reports n n n n

Billing n n n n

Additional certificates n n n n

Maintenance certificates n n

Document design n n

Viewer CD n n

Networkable with multi-user access n

Multiple data paths n

Megger PAT data down and up load n n n n n n

Megger 17th data down load n n n n n n

3rd party instrument support n n n n

Real-time Bluetooth results capture n n n n n n n

Enabled for PowerSuite Ultramobile n n n n n n

Drag and drop editing n n n n n n n

Manual data entry n n n n n n n

Direct data entry n n n n n n n

PDA installation n n n

Smartphone installation n n n

Imports, exports to PowerSuite Professional n n n

E-mails certificates between mobile device and PowerSuite Professional n n n

Additional user licences n n n n n n

Additional network licences n

FREE support 30 days 30 days 30 days 30 days 30 days 30 days

Lite On-site Contractor On-site Power SME mobile

Lite Contractor Ultra

* PowerSuite Ultramobile can only be used in conjunction with one of the other PowerSuite Professional products and is included in the On-site packages.

Test certification softwarePowerSuite ProfessionalDeveloped over many years and with lots of research into your requirements of a software system, PowerSuite is hugely flexible. The application you purchase today can readily be up-graded, so even misjudging how much you will come to rely on computerisation for your certification is not a risk. As your company grows, so can your system.

PowerSuite Lite package is the ideal starting point for a company using computerised certification. With minimal complication and maximum impact. The benefits can be experienced for little cost.

PowerSuite Contractor package will give you everything you need to schedule and invoice electrical inspection and PAT testing certification.

PowerSuite Power package gives added breadth to your certification client base by offering more specialised electrical inspection certificates, such as filling stations and security, and for general maintenance by adding ladder, air compressor, fire extinguisher and many other certificates.

PowerSuite SME is the networking solution for those with a business of sufficient size to need multiple simultaneous access to the client and certificate database. It is fully flexible with four levels of security, messaging, data entry options, multi-concurrent user access, etc.

Our market leading help-desk is already looking forward to assisting you. We are there to help you select the version of PowerSuite that is ideal for your business. Call today on 01304 502 106. For more information go to

bit.ly/PowerSuite

Meter test boxMTB7671/2Works with all makes of testers actively measuring the output of the meter and confirming it is within the limits prescribed as well as checking the readings

Certification bodies like the NICEIC, ELECSA, NAPIT, ECA and others now request evidence of your tester’s accuracy and consistency.

The MTB7671 makes that an easy job.

n Tests the full range of a tester’s capability

n Does not trip RCD protected circuits

n Tests to the regulations BS7671, BS EN61557 and IEE On-Site Guide

n Checks insulation, continuity, loop, PFC and RCD functions

n Confirms tester’s continued performance

n Colour coded test functions

How it worksChecking your testers on a regular basis is vital. You can spot a problem before it happens, making sure your meter is ready for use when you want it. But it is important that you check what the tester is putting out. If the test voltage or current is low it doesn’t stress the system you’re testing properly so you’re not testing to the Wiring Regulations.


bit.ly/MTB7671-2

MFT

MFT with

certification


Part P kits

Combined loop and

RCD testers

MFT1700 Series


Electricaltest kits

Part Pkits

Combinedloop & RCD

testers

Insulationtesters


testers

Looptesters

RCDtesters

PATs


Metertest box

Voltagedetector,

Solar tester

Accessories


Earth testers

Services and leak

detectors

Cable fault locator

Network performance

tester

Prices

VOLTAGE DETECTOR, SOLAR TESTER 25 24 VOLTAGE DETECTOR, SOLAR TESTER

Solar PV testingIrradiance meterPVM210n Single unit for one handed use increasing safety on ladders

and roofs

n Perfect for measurement of incident light for PV panel short circuit current calculation

n 1999 W/m2 range on 33⁄4 digit LCD display

n Camera mount fixing for accurate placement

The pocket-size PVM210 is perfect for use on sloping roofs or at the top of ladders because it has the solar detector built in to the top. This is enhanced by its large clear display and hold function.

It is used for initially choosing optimum position for a PV installation and for measuring the solar power for the calculation of short circuit current to confirm the performance of the PV panel for certification.

On the rear of the meter is a universal camera thread that allows mounting for precise readings if required, also a protective pouch is included with each instrument.

Photovoltaic kitsPVK300 seriesPVK300 kits supply all the instrumentation you require – in addition to your MFT – to site, commission and test a solar PV installation to IEC62446, packed in a single pouch.

PVK320 includes an auto-ranging, CAT IV, 10 A d.c. AVO410 multimeter that allows the short circuit current of a panel to be read directly, as well as the PVM210

PVK330 includes the DCM340 a 600 A a.c./d.c clamp multimeter which speeds the measurement of array stings without the need for disconnection. It can also measure d.c. voltages to 600 V.

AVO410 CAT IV multimeter n

DCM340 Clamp multimeter n

PVM210 Irradiance meter n n

MC3 to MC4 adaptor testleads n n

MC4 to 4 mm plug testleads n n

PVK320 PVK330


bit.ly/PVK300


bit.ly/PVM210

Volt finder and flashlightVF series AC voltage detector

VF2 Voltage finder has a helpful audible warning

VF1 and VF2 Volt finder and flashlight Low power consumption – many hours of flashlight illumination from one set of alkaline batteries.

Identifying live conductors, finding a break in a wire, verifying a blown fuse while in circuit, and detecting the presence of a.c. voltage.

Voltage testersTPT200 series

The easy-to-use TPT210 will warn of a voltage present even with flat batteries

Guaranteed not to trip an RCD, the TPT210 is a 2-pole tester which indicates the presence of voltage with an array of LEDs, while the TPT220 uses an LCD display. Both offer additional functions such as voltage display, phase rotation determination without the need to cross probes, continuity and RCD trip test.

Safety is paramount with these testers, so they are rated at CAT IV 1000 V, are supplied with GS38 shrouds and the tough body is rated to IP65. It goes almost without saying that they continue to indicate live systems even when the battery is removed.

Voltage 6 to 1000 V a.c./d.c. in 8 steps 6 to 1000 V a.c./d.c 1 V resolution

Continuity Up to 500 KΩ visual and audible Up to 150 Ω audible buzzer

Resistance 0 – 2000 Ω Phase indication >100 V a.c. >100 V a.c.

Display Dual coloured LEDs LCD with auto backlight

Torch n n

IP65 protection n n

Manual RCD trip n n

Safety rating CAT IV 1000 V CAT IV 1000 V


TPT210 TPT220

Good practice demands that a two-pole tester is proved on a known live source or proving unit both before and after use. The Megger MPU690 is a convenient method to prove the safe operation of all two-pole testers and Drummond test lamps.

n Capable of testing two-pole voltage detectors and test lamps due to 10 W output

n Step voltage LEDs indicate voltage being generated. 50 V, 100 V, 230 V, 400 V and 690 V

n Generates a.c. waveform for a true test n Compact design that has an integral magnet for attaching

to the cabinet encourages routine safety checks n Automatic on and off conserves batteries n Low battery indication gives ample warning to replace

batteries n Warranty upgradeable to 3 years FREE

Proving unitMPU690


bit.ly/VF1_VF2


bit.ly/TPT200


bit.ly/MPU690

MFT

MFT with

certification


Part P kits

Combined loop and

RCD testers

MFT1700 Series


Electricaltest kits

Part Pkits

Combinedloop & RCD

testers

Insulationtesters


testers

Looptesters

RCDtesters

PATs


Metertest box

Voltagedetector,

Solar tester

Accessories


Earth testers

Services and leak

detectors

Cable fault locator

Network performance

tester

Prices

26 ACCESSORIES ACCESSORIES 27

Socket interface adaptorSIA10Sometimes known as a breakout lead, the SIA10 allows sockets to be tested without disassembly.n Prevents damage to connectionsn Reduces test timen Decoration remains intactn Colour coded for simplicity of usen Makes testing easy where access to socket is limitedn Remains safe if left inadvertently connected to live supply

Phase Sequence IndicatorPSI410Electrical work on commercial and industrial installations often requires working on motorised machinery with three phase supplies. Correct sequence of the phases is important with certain motors and pumps as damage to brakes and valves will occur in minutes with incorrect phasing.

The Megger PSI410 phase rotation indicator provides rapid indication of correct phase sequence utilising a three bi-coloured LED display and a specific audible tone. Clockwise rotation is indicated by clockwise rotating green LEDs with a continuous tone and counter clockwise rotation has counter clockwise rotating red LEDs and a warbling tone.

The unit has been designed to provide a slow rotational speed of the display to allow easy recognition of the direction of rotation.

Dual phase colour coding has been adopted for the PSI410 to allow ease of use on both Brown / Black / Grey and Red / Yellow / Blue colour coded supplies.

The PSI410 also features a triple bi-coloured LED display that indicates that all three phases are present. A green LED indicates the phase is present while a red LED shows a missing phase connection. The unit has a tough case designed for an industrial environment and is supplied with long fused test leads with croc-clips and prods.

The PSI410 is self powered from the supply and requires no batteries.

n LED clockwise and counter clockwise phase rotation indication

n Audible indication of directionn Phase condition LEDsn Fused test leadsn Dual phase colour identificationn CAT IV 600 Vn Warranty upgradeable to 3 years FREE


bit.ly/ Megger_SIA10


bit.ly/PSI410

Socket testerMST210

n Simple and effective identification of faulty wiring at sockets

n Easy to usen 2 green and 1 red LED for instant error reporting and fault

diagnosisn Identifies 17 missing wire and wrong connection

combinationsn Tough and reliable

PAT and 17th Edition inspection DVDsn Instructional DVDs on testing and inspecting installationsn Ideal study aids for anyone enrolled on a C&G2394,

C&G2395 or equivalent coursen Excellent refresher on best practice for experienced

electricians

DVDs

Initial inspection and test of a domestic property DVD100

Initial inspection and test of industrial properties DVD200

PAT testing and inspection 1002-384

Order number

50 m extension lead, green, with 4 mm safety plug ETL50

30 m extension lead, green, with 4 mm safety plug ETL30

Code

Extension test lead and coil

n 30 metre and 50 metre versionsn Suitable for direct R2 measurementsn Easy to re-wind cable with tangle-free cable guiden Compact and light design

Compact extension test lead for direct R2 measurements so eliminating the need for crossover connections. The furthest point in the circuit can be easily verified, and every earth point on the circuit checked for integrity prior to energising.


bit.ly/Megger_DVDs


bit.ly/ETL30_ETL50

MFT

MFT with

certification


Part P kits

Combined loop and

RCD testers

MFT1700 Series


Electricaltest kits

Part Pkits

Combinedloop & RCD

testers

Insulationtesters


testers

Looptesters

RCDtesters

PATs


Metertest box

Voltagedetector,

Solar tester

Accessories


Earth testers

Services and leak

detectors

Cable fault locator

Network performance

tester

Prices

28 CLAMP AND MULTIMETERS CLAMP AND MULTIMETERS 29

Clamps and multimeters

Powerful range of tough multimeters

Classic multimeter

AVO300 seriesStraight forward and tough multimetern Auto-ranging functionn Separate fuse and battery

compartment, allows both to be replaced without breaking the calibration seals

n Rubber-armoured case has an integral stand and hanger

n Large uncluttered displayn AVO310 has a backlightn CAT III 600 V safety

CAT IV multimeter

AVO410 n Voltage, current and resistance measurementn True rms on a.c. functionsn Auto ranging but with the option of manual

range selectionn Max and min measurementsn Data holdn Continuity and diode testingn 600 μF capacitance and 60 MHz

frequency rangesn Tough rubber holstern CAT IV 600 V safety

400 A a.c. clampmeter

DCM310n Easy to readn Manual operation n Low costn ToughThis easy to use clampmeter is ideal to rapidly check the current flowing with the minimum of fuss.

DCM310

Earth leakage clampmeter

DCM300En Versatile high resolution a.c. current clamp, ideal for

checking nuisance tripping RCDsn 4 ranges: 30 mA range (0.01 mA resolution),

300 mA, 30 A and 300 An 31⁄2 digit LCD with analogue bar graphn Data hold

DCM300E is perfect for measuring earth leakage current in a circuit where the RCD repeatedly trips out. The measured result will quickly identify whether the tripping is caused by excessive leakage current, or if the RCD itself is faulty. With its high noise rejection, it can measure leakage differentials, when clamped around the live and neutral of a circuit simultaneously.

DCM300E – a high resolution a.c. current clamp

Multimeters series accessories

1002-001 Replacement test lead set

1002-015 500 mA fused test lead set

Current ranges A a.c. 10 A 10 A 0.6 mA, 6 mA, 20 A, 200 A, 40 A, 200 A, 200 A 60 A, 400 A, 6 A 10 A 400 A 400 A 600 A

True rms n

A d.c. 10 A 10 A 0.6 mA, 6 mA, 60 A, 400 A, 6 A 10 A 600 A

Voltage range V a.c. 1000 V 1000 V 750 V 200 V, 600 V 200 V, 1000 V 400 V, 600 V

Trms n

V d.c. 1000 V 1000 V 1000 V 200 V, 600 V 200 V, 1000 V 400 V, 600 V

Resistance range Ω 40 M 40 M 600, 6 k, 60 k, 200, 2 k, 200 k, 200, 2 k, 200 k, 400 600 k, 6 M 60 M 2 M, 20 M 2 M, 20 M

Continuity range Buzzer n n n n n n

Diode n

Auto-ranging n n n n n n

Backlit display n n n

Data hold n n n n n n n

Max hold n n n n

Conductor size 27 mm 27 mm 16 mm 35 mm

Other Warranty upgradeable to 3 years FREE n n n

Safety rating CATIII 600 V CATIII 600 V CATIV 600 V CATIII 600 V CATIII 600 V CATIV 600 V CATIII 600 V

AVO300 AVO310 AVO410 DCM310 DCM320 DCM330 DCM340


bit.ly/AVO300


bit.ly/DCM300E


bit.ly/AVO410

400 A a.c. Clamp multimeter

DCM320n 20 MΩ resistance rangen Continuity buzzern Auto-rangingn Auto off to conserve

batteries

The DCM320 is a low cost data hold current clamp and multimeter. It is supplied blister packed complete with test leads, batteries and carry case.

Fork multimeter

DCM330n 200 A a.c. Open-Jaw current

measurementn 0.1 V to 1000 V auto-ranging a.c. and

d.c. voltage measurementn 0.1 Ω to 20.00 MΩ Resistance rangen Continuity buzzer and diode checkn Non-contact detection of a.c. voltagen CATIV 600 VThe Megger DCM330 is suitable for use anywhere where there is a requirement to measure a.c. current in single unshielded conductors less than 16mm diameter, a.c./d.c. voltages up to 1000 V, or resistances up to 20 MΩ.

600 A a.c. / d.c. Clamp multimeter

DCM340n d.c. current rangen Frequency countern Analogue bar graphn Back lightn Large jawsn Auto off to conserve batteries

The DCM340 is an a.c. and d.c. current clamp and multimeter that offers exceptional value and is particularly suited to solar PV commissioning. It is supplied blister packed complete with test leads, batteries, user guide and carry case.

DCM340DCM330

DCM320


bit.ly/DCM330


bit.ly/DCM310_DCM320


bit.ly/DCM340

Current ranges a.c. 30 mA, 300 mA, 30 A, 300 A.

Data hold n

Max conductor size 40 mm

Safety rating CATIII 300 V

Warranty upgradeable to 3 years FREE n

DCM300E

MFT

MFT with

certification


Part P kits

Combined loop and

RCD testers

MFT1700 Series


Electricaltest kits

Part Pkits

Combinedloop & RCD

testers

Insulationtesters


testers

Looptesters

RCDtesters

PATs


Metertest box

Voltagedetector,

Solar tester

Accessories


Earth testers

Services and leak

detectors

Cable fault locator

Network performance

tester

Prices

SERVICES AND LEAK DETECTORS 31 30 EARTH TESTERS

Digital earth testersDET3, DET14C and DET24CDET3 seriesDigital earth testers

All models include these featuresn Extra large selector switchn Large, clear display for easy operation in outdoor conditionsn Simple one button operationn Battery powered with a bar graph indicatorn Noise reduction up to 40 V peak to peakn P54 rated (water/dust ingress) for extra protection in harsh

conditionsn Comes complete with test leads, stakes, batteries,

calibration certificate and rugged polypropylene carry case

DET3TDThree pole earth testing kitn 2 and 3 pole testingn Selectable 25 V or 50 V outputDET3TD offers a complete kit for customers wishing to conduct earth electrode testing using the 2 and 3 pole techniques.

DET3TCART or selective three pole earth testing kitn 2 and 3 pole testingn Selectable 25 V or 50 V outputWhen used with the optional ICLAMP, allows fall of potential testing without the need to disconnect the electrode under test.

DET3TC with optional clamp

DET24C

DET3TD DET3TC DET14C DET24C

DET3 series accessories

6220-803 4 right angled adaptors

1001-8103-wire earth lead test set


bit.ly/DET14C_DET24C


bit.ly/Megger_DET3T

Utility detection and location system EasyLoc The Easyloc system is the fast, reliable method to detect and trace underground utility cable runs and pipe networks. It is simple to operate, with features designed to avoid potentially dangerous power cables and other services as effectively as possible.

The Easyloc receiver displays the signal level detected with a maximum marker for easy location. The operator works with both the audio signal and the visual confirmation at all times. Depth measurement is possible at the push of a button, even when using Power Mode.

EasyLoc Receivern Passive location of power and radio

signalsn Active location of 33 kHz transmitted

signalsn Semi-automatic sensitivity controln Depth measurements in active and passive

modesn Continuous signal strength displayn Peak indicator “Easy Locate”n Comfortable handle in line with utility for

comfortable for single-handed operation n Large display with auto backlight

Passive: power network 50 Hz n n

Radio n n

Active: 33 kHz n n

Line location n n

Probe location x (33 kHz) x (33 kHz)

Depth measurement with transmitter n

Depth measurement without transmitter n

Maximum Marker n n

Dimensions (W x H x D) 10 x 67 26 cm

Weight 2.5 kg

Operating time > 40 hours

Power supply 10 x IEC R6 1.5 V

Function Basic Standard

Transmitted power 0.1 W/0.5 W (switchable)

Frequency 33 kHz

Operating time > 40 hours

Power supply 6 x IEC R20 1.5 V

Weight 2.6 kg

Dimensions (w x H x D) 14 x 26 25.5 cm

Easyloc Tx transmitter

EasyLoc Tx Transmitter / Generator n 33 kHz continuous or pulsedn Class leading power outputn High (0.5 W) and low (0.1 W)

power settingsn Simple push-button controln Induction or direct

connectionn Induction in two planes of

antenna orientation


bit.ly/EasyLoc

Mini leak detector HL5 The Hydrolux HL 5 is a professional water leak detection unit offering both visual and audible indication of a leak. It belongs in the jacket of every facilities engineer and manager as an aid to on the spot leak detection.

Special featuresn Perfect for the facilities manager

to help locate water leaks

n Excellent audio characteristics

n 3 optimised filter settings

n Mute setting (no static noise in the headphones)

n Wireless noise transmission

n Built-in LED light for night work


bit.ly/HL5

MFT

MFT with

certification


Part P kits

Combined loop and

RCD testers

MFT1700 Series


Electricaltest kits

Part Pkits

Combinedloop & RCD

testers

Insulationtesters


testers

Looptesters

RCDtesters

PATs


Metertest box

Voltagedetector,

Solar tester

Accessories


Earth testers

Services and leak

detectors

Cable fault locator

Network performance

tester

Prices

n Pocketsizen Mute setting (no static noise in the headphones)n 3 optimised filter settingsn Excellent, audio characteristicsn Optional adapter, for use as a ground microphonen Easy, one-button operationn Immediate detection of leaksn Wireless noise transmissionn Built-in LED light for night workn Wireless range 20 mn 10 level LED display

Stakeless testing n n

3-wire testing n n

2-wire testing n n

ART (Attached Rod Technique) enabled n

Resistance range Ω 0.01 to 2000 0.01 to 2000 0.05 to 1500 0.05 to 1500

Earth Voltage range 0 to 100 V 0 to 100 V

Earth Current range (with optional clamp) 0.5 mA to 19.9 A 0.5 mA to 35 A 0.5 mA to 35 A

Display Digital Digital Digital Digital

Datalogging n n

Downloading n

32 CABLE FAULT LOCATOR NETWORK PERFORMANCE TESTER 33

Network Ethernet TesterNET200NET200 is the latest, all-in-one network qualification tool. It measures logical network performance. It provides the round-trip time (RTT) to measure network speed under dynamic and static configuration protocol and IP scanning to show the information on all the terminals connected into the local network. It can also evaluate the capability of link connections to support specific network speeds and duplexity (half- or full- duplex).

The device provides the physical information of the LAN cable under test such as; Cable length, distance to fault (open or short) and wire map (pass, fail). With the graphic user interface supplied by 128x64 LCD and serial communication port, field engineers can easily apply the device to network testing, transfer the stored data to their PCs and print reports via software.

n Network qualification in one devicen Measures logical network performancen Checks physical condition of cablesn Coax and RJ45 connectionsn Autotest capabilityn Tone Generator built inn Li-ion battery


bit.ly/Megger_ NET200

Cable fault locatorsTDR mark3 series Using a Time Domain Reflectometer (TDR) is a well established method for finding the location of faults in metallic power or data cables. In the past TDRs have had a reputation of being expensive and difficult to use but now, the Megger TDR Mark3 series has put paid to that.

An AUTO selection option, fast pulse and built in blocking filter ensures that the most effective selection depending on the range required, helping rapid diagnosis of the TDR trace. In addition on the TDR1000/3 and TDR1000/3P, dual cursors allow complete flexibility, giving the operator full control and instant indication of distance between two points.

n Acurate and easy fault finding because of resolution as low as 0.1 m

n Ultra fast 2 ns pulse for near end fault identificationn Trace hold and comparison not TDR500/3n Auto selected output impedance (between 25, 50, 75 and

100 Ω)n Power blocking filter not requiredn For use on Telecom TNV-3 circuit, or 150 V CAT IV power

circuitsn Environmental protection to IP54n High resolution backlit monochrome LCDn Adjustable display contrastn 2 year warranty

Range Capability 0.2 m to 5000 m 0.2 m to 5000 m 0.2 m to 5000 m

Minimum Pulse 2ns 2ns 2ns

Blocking Filter YES YES YES

Cursors 1 2 2

Memory Trace Hold Trace Hold with Trace Hold with Live Trace Overlay Live Trace Overlay

Sample Time 60ns 60ns 60ns

Backlight Yes Yes Yes

Auto Power Off Yes Yes Yes

Test leads Miniature clip Miniature clip Standard clip 10 A fused

CAT Rating 300V CAT III 300V CAT III 300V CAT III 150V CAT IV 150V CAT IV 150V CAT IV

IP Rating IP54 IP54 IP54

TDR500/3 TDR1000/3 TDR1000/3P


bit.ly/TDR1000-3

Special featuresn Network Analysis – RTT, Link partner ability,

IP Scan

n Auto measurement – with selection of tests

n LAN measurement – Distance, Wiremap, Crosstalk, Impedance and Continuity

n Coax capability – graphic or numeric TDR (selectable)

n Tone Generator – 1kHz analogue tone signal

MFT

MFT with

certification


Part P kits

Combined loop and

RCD testers

MFT1700 Series


Electricaltest kits

Part Pkits

Combinedloop & RCD

testers

Insulationtesters


testers

Looptesters

RCDtesters

PATs


Metertest box

Voltagedetector,

Solar tester

Accessories


Earth testers

Services and leak

detectors

Cable fault locator

Network performance

tester

Prices

PRICE LIST 35 34 PRICE LIST

Test leads available at www.megger.com/uk/shop

Page 4 and 5 MFT1710 Multifunction tester 765.00 MFT1720 Multifunction tester with 2-wire auto RCD and phase sequence indicator 1,095.00 MFT1730 Multifunction tester with downloading, rechargeable cells and 3-wire earth testing enabled 1,295.00 Included 1001-878 Remote switched probe CAT IV 600 V (not MFT1710) 49.00 6220-810 Socket interface adaptor 29.00 1001-991 3-wire lead set with prods and croc clips 49.00 2001-649 Hard carry case 29.00

Accessories 1002-490 Spare probes and clips red, blue and green 20.00 1001-810 3-wire earth electrode test set 45.00 1001-975 3-wire 10 A fused lead set red, blue and green with prods and croc clips 55.00 ICLAMP 100 A current clamp 239.00 6280-332 Charging lead for 12 V vehicle power outlets 12.00 6420-143 Instrument and document carry bag 39.00

Page 6 MFT1730 On-site Multifunction tester with downloading, rechargeable cells, 3-wire earth testing and certification software 1,455. 00

Included 1001-878 Remote switched probe CAT IV 600 V 49.00 6220-810 Socket interface adaptor 29.00 1001-991 3-wire lead set with prods and croc clips 49.00 1001-810 3-wire earth electrode test set 45.00 2001-649 Hard carry case 29.00 1000-632 PowerSuite Professional Lite On-site 339.00

Accessories 1002-490 Spare probes and clips red, blue and green 20.00 6420-143 Instrument and document carry bag 39.00 1002-015 2-wire 500 mA fused lead set red and black with prods and croc clips 49.00 1001-975 3-wire 10 A fused lead set red, blue and green with prods and croc clips 55.00 ICLAMP 100 A current clamp 239.00 6280-332 Charging lead for 12 V vehicle power outlets 12.00

Page 7 MTK310 test kit Comprising MIT310, LTW315 and RCDT310 1,259.00 MTK320 test kit Comprising MIT320, LTW325 and RCDT320 1,415.00 MTK330 test kit Comprising MIT330, LTW335 and RCDT330 1,555.00

Included 1001-884 Remote switched probe (not MTK310) 45.00 6220-740 UK mains test lead set 29.00 6220-810 Socket interface adaptor 29.00 1001-976 2-wire lead set red and green with prods and croc clips 29.00 1002-001 2-wire lead set red and black with prods and croc clips 29.00

Accessories 1002-015 2-wire 500 mA fused lead set red and black with prods and croc clips 49.00 1001-977 2-wire 10 A fused lead set red and green with prods and croc clips 50.00

Page 8 PPK210 Electrical test kit comprising of MIT310 and LRCD210 899.00 PPK220 Electrical test kit comprising of MIT320 and LRCD220 1,019.00

Included 6220-740 UK mains test lead set 29.00 1001-883 3-wire lead set with prods and croc clips 39.00 1002-001 2-wire lead set red and black with prods and croc clips 29.00 5410-418 Hard carry case 29.00

Accessories 1002-015 2-wire 500 mA fused lead set red and black with prods and croc clips 49.00 1001-977 2-wire 10 A fused lead set red and green with prods and croc clips 50.00 6420-143 Instrument and document carry bag 39.00

Page 9 LRCD210 Combined non-trip loop and RCD tester 509.00 LRCD220 Combined non-trip loop and 1000 mA RCD tester 595.00

Included 6220-740 UK mains test lead set 29.00 1001-883 3-wire lead set with prods and croc clips 39.00 5410-409 Hard carry case 19.00

Accessories 1001-977 2-wire 10 A fused lead set red and green with prods and croc clips 50.00

Page 10 and 11 MIT300 Installers’ insulation and continuity tester 250 V and 500 V 299.00 MIT310 Installers’ insulation and continuity tester as MIT300 with 1000 V and 600 V voltmeter 399.00 MIT310A Insulation and continuity tester with analogue display 359.00 MIT320 Insulation and continuity tester as MIT310 with resistance measurement and backlight 439.00 MIT330 Insulation and continuity tester as MIT320 with data storage and downloading 489.00

Included 1002-001 2-wire lead set red and black with prods and croc clips 29.00 1001-884 Remote switched probe ( MIT320 and MIT330 only) 45.00 5410-409 Hard carry case 19.00

Accessories 1002-015 2-wire 500 mA fused lead set red and black with prods and croc clips 49.00

Price £ exclusive of VAT


Page 12 MIT220 Pocket-sized insulation and continuity tester 250 V and 500 V 265.00 MIT230 Pocket-sized insulation and continuity tester 250 V, 500 V and 1000 V 339.00

Included 1002-001 2-wire lead set red and black with prods and croc clips 29.00 5410-419 Hard carry case 19.00

Accessories 1002-015 2-wire 500 mA fused lead set red and black with prods and croc clips 49.00 5410-346 Protective rubber holster 19.00

Page 13 MIT400 CAT IV 600 V insulation and continuity tester 250 V, 500 V and 1000 V 339.00 MIT410 CAT IV 600 V insulation tester as MIT400 with 50 V 100 V, PI and DAR 399.00 MIT415 CAT IV 600 V insulation and continuity tester 10 V, 25 V, 2 50 V and 500 V 399.00 MIT420 CAT IV 600 V insulation tester as MIT310 with results storage and recall 449.00 MIT430 CAT IV 600 V insulation tester as MIT420 with Bluetooth® downloading 519.00 MIT40X CAT IV 600 V insulation tester voltage selectable from 10 V to 100 V 439.00 MIT480 Telecoms insulation and continuity tester 50 V and 100 V 429.00 MIT481 Telecoms insulation tester 50 V, 100 V, 250 V, 500 V and 1000 V results storage and recall 595.00 MIT485 Telecoms insulation tester as MIT481 with Bluetooth® downloading 665.00

Included 1002-001 2-wire silicone lead set red and black with prods and croc clips 29.00 1001-878 Remote switched probe CAT IV 600 V ( not MIT400 or MIT480) 49.00 5410-420 Hard carry case 19.00

Accessories 1002-015 2-wire 500 mA fused lead set red and black with prods and croc clips 49.00 6220-860 Carry pouch 39.00

Page14 and 15 LTW315 Non-trip 2-wire loop resistance tester 100 v to 280 V 499.00 LTW325 Non-trip 2-wire loop resistance tester 50 v to 480 V with frequency measurement 575.00 LTW335 Non-trip loop resistance tester as LTW325 with results storage and downloading 625.00 LTW425 High resolution non-trip loop resistance tester 50 V to 480 V 615.00

Included 6220-810 Socket interface adaptor 29.00 1001-976 2-wire lead set red and green with prods and croc clips 29.00 5410-409 Hard carry case 19.00


LT300-EN-00 CAT IV 300 V high current loop tester with red and green 2-wire lead set 369.00 Included 1001-976 2-wire lead set red and green with prods and croc clips 29.00 5410-409 Hard carry case 19.00

LT300-EN-BS CAT IV 300 V high current loop tester with UK mains test lead 369.00 Included 6220-810 Socket interface adaptor 29.00 5410-409 Hard carry case 19.00

LT300-EN-FS CAT IV 300 V high current loop tester with 10 A fused test lead set 389.00 Included 1001-977 2-wire 10 A fused lead set red and green with prods and croc clips 50.00 5410-409 Hard carry case 19.00

Page 16 and 17 RCDT310 RCD tester 100 V to 280 V 359.00 RCDT320 RCD tester 50 V to 280 V with auto RCD test 409.00 RCDT330 RCD tester as RCDT320 with result storage and downloading 449.00

Included 6220-740 UK mains test lead 29.00 1001-976 2-wire lead set red and green with prods and croc clips (RCDT320 and RCDT330 only) 29.00 5410-409 Hard carry case 19.00


Page 18 PAT320 Manual and automatic, dual voltage PAT tester 859.00 PAT350 Manual and automatic, dual voltage PAT tester with flash testing 1,019.00

Included 2000-870 Continuity, earth bond and insulation test lead 29.00 2000-881 230 V extension lead test adaptor 9.00 5310-401 Flash test lead (PAT350 only) 29.00 2000-962 Carry case with lead and document pouch 59.00

Accessories 1000-766 110 V mains supply adaptor 29.00 6220-639 110 V extension lead test adaptor 19.00 1000-767 415 V 4-pin adaptor lead 49.00 1000-770 415 V 5-pin adaptor lead 49.00 2000-551 PC power supply lead test adaptor 9.00 1000-971 PASS labels, roll of 1000 55.00 1001-227 FAIL labels, roll of 1000 55.00 2001-044 Side mounted lead and document pouch for 2000-962 49.00 PATR210 PAT test duplicate record book 19.00

Price List Price ListPrice £ exclusive of VAT

MFT

MFT with

certification


Part P kits

Combined loop and

RCD testers

MFT1700 Series


Electricaltest kits

Part Pkits

Combinedloop & RCD

testers

Insulationtesters


testers

Looptesters

RCDtesters

PATs


Metertest box

Voltagedetector,

Solar tester

Accessories


Earth testers

Services and leak

detectors

Cable fault locator

Network performance

tester

Prices

36 PRICE LIST PRICE LIST 37


Page 19 PAT320 Business in a Box Manual and automatic, dual voltage PAT tester with report book, PAT testing and marketing guide 949.00

Included 2000-870 Continuity, earth bond and insulation test lead 29.00 2000-881 230 V extension lead test adaptor 9.00 2000-551 PC power supply lead test adaptor 9.00 1000-971 PASS labels, roll of 1000 55.00 PATR210 PAT test duplicate record book 19.00 2000-962 Carry case with lead and document pouch 59.00

Accessories 1000-766 110 V mains supply adaptor 29.00 6220-639 110 V extension lead test adaptor 19.00 1000-767 415 V 4-pin adaptor lead 49.00 1000-770 415 V 5-pin adaptor lead 49.00 1001-227 FAIL labels, roll of 1000 55.00

PAT420 Business in a Box Downloading PAT tester with PowerSuite Professional Contractor PAT software, PAT testing and marketing guide 1,489.00

Included 2000-870 Continuity, earth bond and insulation test lead 29.00 2000-881 230 V extension lead test adaptor 9.00 2000-551 PC power supply lead test adaptor 9.00 PowerSuite Professional Contractor PAT software 1000-971 PASS labels, roll of 1000 55.00 2000-962 Carry case with lead and document pouch 59.00

Accessories 1000-766 110 V mains supply adaptor 29.00 6220-639 110 V extension lead test adaptor 19.00 1000-767 415 V 4-pin adaptor lead 49.00 1000-770 415 V 5-pin adaptor lead 49.00 1001-227 FAIL labels, roll of 1000 55.00 PATR210 PAT test duplicate record book 19.00 1001-047 Opticon OPR3201 bar code scanner 265.00 1001-046 Brother PT-2430 USB pass/fail barcode label printer 195.00

Page 20 and 21 PAT410 Downloading PAT tester with 200 mA bond test only 1,125.00 PAT420 Downloading PAT tester with 25 A, 10 A and 200 mA bond tests 1,269.00 PAT450 Downloading PAT tester with 25 A, 10 A and 200 mA bond and flash testing 1,369.00

Included 2000-870 Continuity, earth bond and insulation test lead 29.00 2000-881 230 V extension lead test adaptor 9.00 2000-551 PC power supply lead test adaptor 9.00 5310-401 Flash test lead (PAT350 only) 29.00 2000-962 Carry case with lead and document pouch 59.00

Accessories 1000-633 PowerSuite Professional Contractor software 495.00 1000-971 PASS labels, roll of 1000 55.00 1001-227 FAIL labels, roll of 1000 55.00 1000-766 110 V mains supply adaptor 29.00 6220-639 110 V extension lead test adaptor 19.00 1000-767 415 V 4-pin adaptor lead 49.00 1000-770 415 V 5-pin adaptor lead 49.00 PATR210 PAT test duplicate record book 19.00 1001-047 Opticon OPR3201 bar code scanner 265.00 1001-046 Brother PT-2430 USB pass/fail barcode label printer 195.00

Page 22 PowerSuite Professional Lite Basic certification software for 17th Edition and PAT testing 245.00 PowerSuite Professional Lite On-site PowerSuite Lite with form filling for mobile devices 339.00 PowerSuite Professional Contractor Certification software for 17th Edition and PAT testing with client management database, billing and 3rd party tester downloading 495.00 PowerSuite Professional Contractor On-site PowerSuite Contractor with form filling for mobile devices 615.00 PowerSuite Professional Power PowerSuite Contractor with additional features such as document design and maintenance certificates 855.00 PowerSuite Professional SME PowerSuite network solution 1105.00 PowerSuite Professional Ultra mobile Form filling for additional mobile devices. Must be used with another PowerSuite Professional product 125.00

Page 23 MTB7671/2 Meter test box 429.00

Included 2002-524 Test record card and label set 15.00

Page 24 PVM210 Irradiance meter 135.00 PVK320 Photovoltaic kit with PVM210 irradiance meter and DCM340 multimeter 245.00 PVK330 Photovoltaic kit with PVM210 irradiance meter and AVO410 clamp multimeter 245.00

Page 25 VF1 Non-contact a.c. voltage detector 15.50 VF2 Non-contact a.c. voltage detector with buzzer 17.00 TPT210 Two-pole voltage detector with LED array 52.00 TPT220 Two-pole voltage detector with LCD display 84.00 MPU690 Proving unit for two-pole testers 99.00


Page 26 PSI410 CAT IV 600 V phase rotation unit 130.00 SIA10 Socket interface adaptor or break-out lead 29.00

Page 27 MST210 BS1363 socket tester 15.00 DVD100 Initial inspection and test for a domestic property (17th Edition) 30.00 DVD200 Initial inspection and test for industrial properties (17th Edition) 30.00 PTDVD PAT testing and inspection DVD 30.00 ETL30 30 m extension test lead on spool 75.00 ETL50 50 m extension test lead on spool 85.00

Page 28 and 29 AVO300 Digital multimeter 89.00 AVO310 Digital multimeter with backlight 99.00 AVO410 CAT IV 600 V TRMS digital multimeter 145.00 Included 2-wire lead set with probes Accessories 1002-001 2-wire lead set red and black with prods and croc clips 29.00 1002-015 2-wire 500 mA fused lead set red and black with prods and croc clips 49.00

DCM310 400 A a.c. clampmeter 85.00 DCM320 400 A a.c., 600 V a.c. and d.c. 20 MΩ clamp multimeter 99.00 DCM330 CAT IV 600 V fork multimeter 105.00 DCM340 600 A a.c. and d.c., 600 V a.c. and d.c. clamp multimeter 145.00 DCM300E Earth leakage clampmeter 375.00 Included 2-wire lead set with probes (not DCM310) Accessories 1002-001 2-wire lead set red and black with prods and croc clips (not DCM310) 29.00 1002-015 2-wire 500 mA fused lead set red and black with prods and croc clips (not DCM310) 49.00

Page 30 DET3TD 3-wire earth tester with bond testing capability 465.00 DET3TC 3-wire earth tester enabled for attached rod technique, ART 515.00 Include 1001-810 3-wire earth electrode test set 45.00 5410-409 Hard carry case 19.00 Accessories ICLAMP Clamp for use with DET3TC for attached rod technique, ART 239.00 6220-803 Right angled adaptors 4 off 29.00

DET14C Earth resistance clamp-on meter 919.00 DET24C Earth resistance clamp-on meter with downloading 1,015.00

Page 31 EasyLoc set Easyloc Standard receiver, Easyloc Tx transmitter, earthing kit, earthing spike, carry bag 1,577.00 EasyLoc Standard Utilities detection and location system with depth measurement 859.00 EasyLoc Basic Utilities detection and location system 774.00 Easyloc Tx transmitter set Easyloc Tx transmitter, earthing kit, earthing spike 718.00

Headphones For using the EasyLoc in noisy environment 32.00 100 mm transmitter clamp To transmit a signal onto powered cables 258.00 House connection set Comprising connection leads for direct connection for power supply, cable TV and telephone lines 124.00

HL5 Mini leak detector kit with FM transmitter 863 MHz 425.00 Included Wireless headphone with FM receiver 1 extension rod and magnet 8.00 Accessories PAM U-D Tripod 8.00 S42 Valve adaptor 45.00 S20 Valve adaptor 32.00

Page 32 TDR500/3 Basic time domain reflectometer 495.00 TDR1000/3 Time domain reflectometer 795.00 Included 6231-652 Miniature clip test lead set 29.00 5410-420 Hard carry case 19.00 Accessories 1002-015 2-wire 500 mA fused lead set red and black with prods and croc clips 49.00

TDR1000/3P Time domain reflectometer 815.00 Included 1002-015 2-wire 500 mA fused lead set red and black with prods and croc clips 49.00 5410-420 Hard carry case 19.00 Accessories 6231-652 Miniature clip test lead set 29.00

Page 33 NET200 Network qualification tester kit 1250.00 Included 2003-184 a.c.-d.c. Power adapter 24.00 2003-181 BNC to F-connector 6.00 2003-183 RS232 to USB adapter cable 10.00 2003-200 d.c. Car charge lead 6.00 2003-189 Portable bag 24.00 2003-187 Power cords (US, EU, UK) 2.00 2003-180 Remote identifier #1 30.00 Accessories 2003-193 Remote identifier #2 30.00 2003-194 Remote identifier #3 30.00 2003-195 Remote identifier #4 30.00 2003-196 Remote identifier #5 30.00 2003-197 Remote identifier #6 30.00 2003-198 Remote identifier #7 30.00 2003-199 Remote identifier #8 30.00

Price List Price ListPrice £ exclusive of VAT

Price £ exclusive of VAT

MFT

MFT with

certification


Part P kits

Combined loop and

RCD testers

MFT1700 Series


Electricaltest kits

Part Pkits

Combinedloop & RCD

testers

Insulationtesters


testers

Looptesters

RCDtesters

PATs


Metertest box

Voltagedetector,

Solar tester

Accessories


Earth testers

Services and leak

detectors

Cable fault locator

Network performance

tester

Prices

ABOUT MEGGER 39 38 OTHER MEGGER PRODUCTS

FRAX101 Sweep frequency response analyser

n Following an incident the quickest way to assess the condition of a transformer, before returning it to service, is to run a FRA test. The FRAX101 is the smallest, most rugged instrument and it offers the highest dynamic range and accuracy.

n Batteries are becoming an increasingly important part of modern life with their use in standby power and maintained supply units. Megger has added to its BITE range of battery impedance testers with the Programma Torkel range of battery load units which allow the batteries to be tested in service, by adjusting to include the load current in the test parameters.

Programma Torkel 840 battery load unit

n Tests for earths and bonding in telecommunications towers, rail, aircraft, anything bimetal, switchgear (including lv switchgear), breakers, etc. Automatically detects continuity in potential and current connections. Gives accurate results in under three seconds, with auto current reversal. Fuse protected to 600 V. NiMH battery reduces weight. Fully automatic. Select the most suitable test current, up to 10 A dc to measure resistance from 0.1 µΩ to 2000 Ω on one of seven ranges.

DLRO10x and DLRO200 and DLRO600 digital low resistance ohmmeter

n SMRT tester and AVTS® software from Megger raises the standard and lowers the weight for the automatic testing and management of protective relay systems. SMRT offers traditional manual and semi-automatic testing of the relay system whilst the AVTS package offers fully automatic testing as well as relay maintenance schedule management.

SMRT protective relay test set

n On-site power quality analysis and data retrieval without a computer. Intelligent download and real time graphical trending of Harmonics, THD and TDD. It now has a faster digital signal processor (DSP), 12 MB of internal, non-volatile memory, and incorporated auxiliary power input capabilities. Includes Metrosoft® software and remote communications.

PA9+ Power quality analyser

n A practical and efficient solution for the fast on spot fault location. The EZ-Thump is the compact and light weight, battery or mains powered solution for the fault location in MV or LV cables. It is the perfect solution for areas of lower distribution density and failure rate.

EZ-Thump cable fault locator

n Measures turns ratio, excitation current and polarity of windings in single- and three-phase distribution and power transformers (tested phase by phase), potential and current transformers, and tapped transformers. User can operate the test set one handed. Eliminates the need to bend down to operate the instrument and speeds up testing time. It is rugged, with a high impact, shock resistant case, yet very light at 870 g.

TTR25 Hand-held single and three-phase transformer tester

n Tests insulation resistance up to 5 TΩ. MIT510/2 is easy to operate and very tough. It can perform automatic IR tests. The built-in timer and high test ranges allow simple and quick evaluation of the condition of the insulation under test. Now upgraded to CATIV 600 V, giving you even better operator safety.

MIT510 5 kV insulation resistance tester Made in UK

All the 17th Edition and PAT products shown in this catalogue are engineered and made at our factory in Dover. If you’ve ever caught a ferry to France, you’ve probably seen our building – there’s a big Megger logo on our car park, next to the roundabout as you enter Dover. Everyone hears about the decline in British manufacturing, but Megger employs hundreds of people at this site. As a professional electrician, you have a right to demand the very best electrical test equipment. By specifying Megger, not only will you get the best, but you’ll also be supporting a great British success story.

Engineered for electrical contractorsMany of our engineers sit on UK and international technical committees, and we have regular meetings with all the big trade associations in England and Scotland. We also have close contacts with training organisations, scheme providers for self-certification schemes for installers, and government organisations. If anyone knows how important it is to understand the needs of electrical contractors in the UK, it’s Megger. So when new legislation or rules are introduced – whether it’s Part P of the Building Regulations, RoHS, the WEEE Directive or BS 7671, you can count on Megger to put your interests first.

Established originally in the late 1800s, the company has been manufacturing test and measurement instruments designed to perform preventive maintenance and troubleshooting for decades. Megger products help customers all over the world improve their efficiency, reduce costs, and meet standards. It operates globally with dedicated field sales teams and distributors located all over the world and manufacturing plants in the United States, Sweden and the United Kingdom.

The commitment of Megger to industry is reflected in its technical leadership and in being the first to design and introduce many key products.

Calibration and repair serviceMegger offers a full Repair and Calibration accredited to ISO9001:2008. Our trained repair technicians use only production spare parts and the latest test equipment to ensure that we give customers the highest standard of service for any instrument.

For information on having your instrument calibrated or repaired and to obtain a Returns Authorisation number please call 01304 502101.

Certified to ISO 9001:2008 and ISO14001:2004Megger’s manufacturing plant in Dover is certified to the full operational requirements of ISO 9001:2008 and the manufacturing process strictly adheres to the highest standards for quality, reliability and safety. It is also certified to ISO14001:2004, the standard for environmental management systems.

About MeggerOther Megger products you may find useful

Technical specifications are subject to change without notice.

MFT

MFT with

certification


Part P kits

Combined loop and

RCD testers

MFT1700 Series


Electricaltest kits

Part Pkits

Combinedloop & RCD

testers

Insulationtesters


testers

Looptesters

RCDtesters

PATs


Metertest box

Voltagedetector,

Solar tester

Accessories


Earth testers

Services and leak

detectors

Cable fault locator

Network performance

tester

Prices

Pamela Kinnell

Address Stamp

Megger Electrical Testing Instruments - Cable Fault Locators, High Voltage Detectors & Voltage Indicators

Technology