www.welding-and-cutting.info Technical journal for welding and allied processes The Welding Institute Issue 01 2012 04 Solid wires face keen challenge from flux cored alternatives The fundamentals of low- temperature silver brazing – Part 5: Induction and resistance heating Modelling and visualisation of the GMA processes The TransSteel 3500/5000 and now the 3500 compact version embody an intelligent industrial design, tremendous ease of handling, rugged construction and long service life. This digitally controlled MIG/MAG welding system comes with Steel Transfer Technology to give you optimum steel welding characteristics. Want to know more? Visit: www.fronius.co.uk or call 08444 721 821 / Battery Charging Systems / Welding Technology / Solar Electronics Media Information 2 013
18
Embed
Mediadaten Welding Cutting 2013 - portal.pressrelations.deportal.pressrelations.de/mediadaten/Welding_and_Cutting_Mediadaten... Technical journal for welding and allied processes The
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
www.welding-and-cutting.info Technical journal for welding and allied processes
The Welding Institute
Issue
01201204
Solid wires face keen challengefrom flux cored alternatives
The fundamentals of low-temperature silver brazing – Part 5: Induction and resistance heating
Modelling and visualisation of theGMA processes
The TransSteel 3500/5000 and now the 3500 compact version embody an intelligent industrial design, tremendous ease of handling, rugged construction and long service life. This digitally controlled MIG/MAG welding system comes with Steel Transfer Technology to give you optimum steel welding characteristics. Want to know more? Visit: www.fronius.co.uk or call 08444 721 821
/ Battery Charging Systems / Welding Technology / Solar Electronics
Media Information 2 013
Seite/page 2 – 3 Kurzcharakteristik, Redaktion, Verlag / Editorial Profi le, Editorial, Publisher
Seite/page 4 – 5 Erscheinungs- und Redaktionsplan / Publication and Editorial Plan
RUSSIA ESSEN WELDING & CUTTING 25.06. – 28.06.2013 Moskau/Russland
4 Juli/August Messeheft SCHWEISSEN & SCHNEIDEN 20134 July/August Anwendungsbeispiele der Schweiß- und Schneidtechnik
SCHWEISSEN & SCHNEIDEN 2013 16. – 21. September 2013, Essen
BRAZIL WELDING SHOW 01. – 04. Oktober 2013 São Paulo, Brasilien
5 September/ Anwendungsbeispiele der Schweiß- und SchneidtechnikOktober FABTECH International AWS Welding Show5 September/ 18. – 21. November 2013 Chicago/USAOctober BLECHEXPO und SCHWEISSTEC 05.11. – 08.11.2013 in Stuttgart
6 November MessenachberichtDezember SCHWEISSEN & SCHNEIDEN 2013
6 November/ Anwendungsbeispiele in der Schweiß- und Schneidtechnik;December Fertigungsverfahren und Fertigungsmittel; Automation durch Roboter und Sensoren beim Fügen und Trennen
BRAZIL WELDING SHOWOctober 1 – 4, 2013São Paulo, Brazil
Examples of applications in welding and 20. September 2013cutting technology September 20, 2013
FABTECH International AWS Welding ShowNovember 18 – 21, 2013 Chicago/USA
BLECHEXPO and SCHWEISSTECNovember 5 – 8, 2013 in Stuttgart/Germany
Fair review 10. November 2013SCHWEISSEN & SCHNEIDEN 2013 November 10, 2013
Examples of applications in welding and cutting technology;Fabrication processes and fabrication materials;Automation using robots and sensors in the case of joining and cutting
4/5
Format: DIN A4 (210 mm breit, 297 mm hoch)Satzspiegel: 176 mm breit, 253 mm hoch, 2 Spalten zu je 86 mmAnzeigenpreis: 1/1 Seite € 2.400,00 1/2 Seite € 1.200,00 Juniorpage € 1.700,00 1/3 Seite € 800,00 1/4 Seite € 600,00 1/8 Seite € 300,00
Die Anzeigenmaße fi nden Sie auf der nächsten Seite
PR-Spezial: 1/1 Seite s/w (176 mm breit, 253 mm hoch) € 2.400,00 Platzvorschriften als Bestandteil des Auftrags bedingen in jedem Fall einen Zuschlag von 10%
Nachlässe: Bei Abnahme innerhalb eines Inserationsjahres Malstaffel Mengenstaffel 2 x 5 % 2 Seiten 10 % 4 x 10 % 3 Seiten 15 % 6 x 15 % 6 Seiten 20 %Satzspiegel- überschreitung: Zuschlag € 170,00 Anschnittformat: 216 mm breit, 305 mm hoch
Farbzuschläge: 1/1 und 1/2 Seite 1/3 Seite und kleiner je Farbe Euroskala € 370,00 € 185,00 Sonderfarbe € 500,00 € 500,00 vierfarbig € 1.000,00 € 520,00 Alle Zuschläge werden nicht rabattiert.
Auf alle Anzeigenpreise wird die derzeit geltende Mehrwertsteuer erhoben.
Stellenangebote: Millimeterpreis € 6,50 bei einer Spaltenbreite von 86 mm Chiffre-Gebühr € 6,50 Die Anzeige erscheint zusätzlich einen Monat im Stellenmarkt auf den DVS-Internet-SeitenGelegenheits-anzeigen: (Verkäufe, Geschäftsverbindungen, etc.) Millimeterpreis € 5,80 bei einer Spaltenbreite von 86 mm Chiffre-Gebühren € 6,50
Druckunterlagen: Details siehe Seite »Datenformate«
Beihefter: 2 Seiten (bis 115 g/m2) € 2.900,00 Format: 216 mm breit, 305 mm hoch inkl. 3 mm Fräsrand, 5 mm Kopfbeschnitt, 3 mm außen, 3 mm Fuß
Beilagen: bis 25 g (ohne Rabatt) € 280 ‰ inkl. Postgebühr Größtes Format: 195 mm breit, 285 mm hoch
Deutsche Bank AG, Düsseldorf, Konto 1 557 008, BLZ 300 700 10
Anzeigenpreisliste 12gültig ab 01. Januar 2013
Format: DIN A4 (210 mm wide, 297 mm high)Type area: 176 mm wide, 253 mm high, 2 columns per 86 mmBasic rates: 1/1 page € 2,400.00 1/2 page € 1,200.00 Juniorpage € 1,700.00 1/3 page € 800.00 1/4 page € 600.00 1/8 page € 300.00 unusual size to inquiry You can fi nd the measurements of the adverts on the next page
PR-Special: 1/1 page b/w (176 mm wide, 253 mm high) € 2,400.00
Guaranteed positions are subject to a surcharge of 10 %
Series discounts: For advertisements published within 12 months for 2 repeats 5 % for 4 repeats or 2 pages 10 % for 6 repeats or 3 pages 15 % for 6 pages 20 % Bleed surcharge: Size: 216 mm wide, 305 mm high € 170.00
Colour surcharge: 1/1 and 1/2 page 1/3 page and smaller per standard colour € 370.00 € 185.00 per special colour € 500.00 € 500.00 four-coloured € 1,000.00 € 520.00 No discounts on all surcharges
Advertising Rates 12valid from January 1st, 2013
Job offer: Column-millimeter-price € 6.50 Box number charge € 6.50
For sale: Coloumn-millimeter-price € 5.80 Box number charge € 6.50PrintingMaterial: Details see »Data Formats«
Bound-in-inserts: 2 pages (paper up to 115 g/m2) € 2.900,00 Format: 216 mm x 305 mm incl. 3 mm bleed difference all around
Loose inserts: weight up to 25 g (without discount) € 280 ‰ postal charge incl. max. format: 195 mm wide, 285 mm high
To be supplied free of all charges to our printer: Kraft Druck GmbH Industriestrasse 5-9, D-76275 Ettlingen Phone: +49 7243 5910
Closing dates: see Editorial Plan
Terms of payment: 30 days after invoice date without discount 8 days after invoice date 2 % discount
Bank details: Deutsche Bank AG, Düsseldorf, Account no. 1 557 008, Bank code no. 300 700 10
6/7
1/1 Seite/page176 mm breit/wide253 mm hoch/high
1/1 Seite/page210 mm breit/wide297 mm hoch/high
im Satzspiegel / Type area
im Anschnitt / with bleedalle Formate zzgl. 3 mm Beschnitt an allen Heftaußenkanten, Kopf 5 mm / all formats plus 3 mm bleed difference round, 5 mm headbleed
Titelseite:210 mm breit, 185 mm hochzzgl. 3 mm Beschnitt rechts
Frontcover:210 mm wide, 185 mm highplus 3 mm bleed right
1/2 hoch/vertical86 mm breit/wide253 mm hoch/high
1/2 hoch/vertical103 mm breit/wide297 mm hoch/high
1/2 quer/horizontal176 mm breit/wide125 mm hoch/high
1/2 quer/horizontal210 mm breit/wide147 mm hoch/high
Juniorpage120 mm breit/wide170 mm hoch/high
Juniorpage137 mm breit/wide192 mm hoch/high
1/3 hoch/vertical57 mm breit/wide253 mm hoch/high
1/3 hoch/vertical74 mm breit/wide297 mm hoch/high
1/3 quer/horizontal176 mm breit/wide85 mm hoch/high
1/3 quer/horizontal210 mm breit/wide107 mm hoch/high
1/4 hoch/vertical86 mm breit/wide125 mm hoch/high
1/4 hoch/vertical103 mm breit/wide147 mm hoch/high
1/4 quer/horizontal176 mm breit/wide62 mm hoch/high
1/4 quer/horizontal210 mm breit/wide84 mm hoch/high
1/8 Seite/page86 mm breit/wide62 mm hoch/high
1/8 Seite/page103 mm breit/wide84 mm hoch/high
Standardformate für AnzeigenStandard formats for advertising
PDF Dateien, als unseparierte PDF-X/3 Datei Auflösung: Bildanteile 300 dpi, Lineart 1200 dpi Weitere Datenformate auf Anfrage Bitte achten Sie darauf, dass alle verwendeten Schriften, Logos und Grafiken (300 dpi) als Datei mitgeliefert werden, sofern Sie nicht in das Dokument eingebettet sind
Hinweise für eine reibungslose Abwicklung:
• Schwarz/Weiß-Anzeigen nur in Schwarz/Weiß bzw. Graustufen anlegen
• Farben nur in Cyan, Magenta, Yellow und Schwarz (Prozessfarben) mischen
• Die Dateinamen sollten keine Leer- oder Sonderzeichen enthalten
• Parallel zur Lieferung der Daten bitte einen Ausdruck der Anzeigen liefern,
damit die digitalen Daten geprüft werden können
• Bei 4c-Anzeigen bitte einen Proof schicken
• Bei der Datenübermittlung jeweils die Zeitschrift und Ausgabe angeben
PDF files as unseparated PDF-X/3-files Resolution: pictures 300 dpi, lineart 1200 dpi Other formats on request Please pay attention, that all fonts, logos and graphics used must also be delivered of the data
Instruction for smooth processing:
• Prepare black-and-white advertisements only in black and white or grey shades
• Please mix colours only in cyan, magenta, yellow and black (process colours)
• The file name should not include any blanks or special characters
• Please send a printout of the file, so that the correctness of
the data files can be checked
• In the case of 4c advertisments, please send a proof
• For the data transmission, please specify the journal and issue in question
Datenformate Data Formats
8/9
Format: DIN A4 (210 mm breit, 297 mm hoch)
Satzspiegel: 176 mm breit, 253 mm hoch, 2 Spalten zu je 86 mm
Anzeigenpreise: 1/1 Seite 4c (176 mm breit, 253 mm hoch) € 1.000,00 1/2 Seite 4c (86 mm breit, 253 mm hoch 176 mm breit, 125 mm hoch) € 600,00 1/4 Seite 4c (86 mm breit, 125 mm hoch 176 mm breit, 62 mm hoch) € 400,00 Titelseite: vierfarbig, 210 mm breit, 185 mm hoch € 1.500,00 Auflage: 3000 Exemplare
Anzeigenschluss / Closing date:2. April / April 2nd 2013Erscheinungstermin / Publishing date:22. April / April 22nd 2013
Anzeigenschluss / Closing date:10. April / April 10th 2013
Erscheinungstermin / Publishing date:2. Mai / May 2nd 2013
WELDING AND CUTTING RUSSIA
WELDING AND CUTTING CHINA
Special Issues
Anzeigentarif Advertising rates
Format: DIN A4 (210 mm wide, 297 mm high)
Type area: 176 mm wide, 253 mm high, 2 columns per 86 mm
Basic rates: 1/1 page 4c (176 mm wide, 253 mm high) € 1,000.00 1/2 page 4c (86 mm wide, 253 mm high 176 mm wide, 125 mm high) € 600.00 1/4 page 4c (86 mm wide, 125 mm high 176 mm wide, 62 mm high) € 400.00 Front cover: four-colour, 210 mm wide, 185 mm high € 1,500.00 Circulation: 3000 copies
AB GRIP – ���的�����。��的MIG/MAG����,�用��化�����,�����到500A。
�用���的�用易��。�������指在��
����到最�舒适�。特������的��需��
��。
www.binzel-abicor.com
Get the feeling!
T E C H N O L O G Y F O R T H E W E L D E R ’ S W O R L D .
Seite 2
WuC_China__1_2011:Layout 1 26.04.11 17:24 Seite 1
Europe 68,1 % 6,805
America 13,3 % 1,335
Asia 16,3 % 1,635
Australia 1,4 % 136
Africa 0,9 % 89
100 % 10,000
Circulation
1 North-Europe 61,4 % 4,181 Great Britain Skandinavia
2 Central-Europe 25,0 % 1,702 France Switzerland Benelux Germany Australia
3 South-Europe 9,4 % 638 Italy Spain Portugal
4 Eastern-Europe 4,2 % 284
100 % 6,805
Circulation in Europe
EuropeAmericaAsiaAustraliaAfrica
1 2 3 4 10/11
The advantages at a glance:
• Complete listing of your companys address (including e-mail and Internet-address)
• Entry in the Internet (www.dvs-media.info) including your company logo and with a link
to your homepage
• Complete listing of your entries in German and English language
• Opportunity to develop new international contacts
• Start of the entries is possible in each month (deadline: the 15th of month in advance)
The ABC of JoiningInternational Industry Guide
Fachzeitschrift für Schweißen und verwandte Verfahren
SCHWEISSENSCHNEIDENund
Mehr dazu!ABIDOT – Das neue, clevere Werkzeug für berührungs-loses Programmieren von Schweißrobotern …… einfach anstatt der Gasdüse auf den Brenner schrauben unddie TCP-Programmierung wird zum „Kinderspiel“! Ab sofort ge-hören lange Programmierzeiten der Vergangenheit an!
ABIDOT. Roboter-Programmierungauf den Punkt gebracht!
T E C H N O L O G Y F O R T H E W E L D E R ’ S W O R L D .
A
■ Entwicklung fluss-mittelfreier Prozessezum aluminiumlöten
■ Laserstrahlprozess-optimierung zumSchweißen von al-Li
■ Schweißzellen-konzept für kleineSerienproduktionen
■ niedrigschmelzendeLote für hochfestealuminiumlegierungen
www.schweissenundschneiden.de 64. Jahrgang
G 6
253
082012
U1_TITEL_SuS_8_2012_Layout 1 08.08.12 16:51 Seite 1
www.derpraktiker.de
Das Magazin für Schweißtechnik und mehr
2012
Wege zur Präzision:
Fugenvorbereitung an Stählen
Seite 24
Ein-Blick in die Normung:
Korrosionsschutz von StahlbautenSeite 34
Von Theorie und Praxis:
Gestaltung der Schweißnaht-dicke an Kehlnähten
Seite 22
DER
PRA
KTI
KER
- D
as M
agaz
in f
ür S
chw
eißt
echn
ik u
nd m
ehr
1-
2/12
www.rehm-online.de
Highlights innovativer Schweißtechnik von REHM:
INVERTIG.PRO digital und AUTOMATION.SYSTEMS
U1_1-2_12_titel_DP_2009 19.01.12 17:09 Seite 1
www.welding-and-cutting.info Technical journal for welding and allied processes
The Welding Institute
Issue
01201204
Solid wires face keen challengefrom flux cored alternatives
The fundamentals of low-temperature silver brazing – Part 5: Induction and resistance heating
Modelling and visualisation of theGMA processes
The TransSteel 3500/5000 and now the 3500 compact version embody an intelligent industrial design, tremendous ease of handling, rugged construction and long service life. This digitally controlled MIG/MAG welding system comes with Steel Transfer Technology to give you optimum steel welding characteristics. Want to know more? Visit: www.fronius.co.uk or call 08444 721 821
/ Battery Charging Systems / Welding Technology / Solar Electronics
Circulation: 6,000 copiesFrequency:in 6 of 12 issues annualLanguage: German
Circulation: 10,000 copiesFrequency:in 6 of 12 issues annualLanguage: German
Circulation: 10,000 copiesFrequency: 6 issues per annumLanguage: English
Organizations, education and training, research, information transfer, technical literature and regulations
I
III
V
VII
IX
II
IV
VI
VIII
X
XI
XII
XIII
Please request an offer this very day!You can find the list of products with the key-words in every issue of the industry guide.Deadline for your entries: The 15th of month in advance.
Of course we send you the documents or a sample number.Please call us or write us an E-Mail.
Moderne Schichtkonzepte in der Öl- und Gas-Industrie • Modern coating solutions in
the oil and gas industries • Kolbenstangenbeschichtungen im Offshore-Einsatz
• Piston rod coatings in offshore utilisation • Thermische Beschichtungen zur Erdöl-
und Erdgasgewinnung • Thermal coatings for the extraction of crude oil and natural gas
1/2012Schwerpunkt
PetrochemieFocusing onpetrochemistry
THER
MA
L SP
RA
YBU
LLET
IN1/
12
U1_TSB_1_12_Titel_tsb 27.03.12 17:39 Seite 1
www.welding-and-cutting.info Technical journal for welding and allied processes
The Welding Institute
Issue
01201204
Solid wires face keen challengefrom flux cored alternatives
The fundamentals of low-temperature silver brazing – Part 5: Induction and resistance heating
Modelling and visualisation of theGMA processes
The TransSteel 3500/5000 and now the 3500 compact version embody an intelligent industrial design, tremendous ease of handling, rugged construction and long service life. This digitally controlled MIG/MAG welding system comes with Steel Transfer Technology to give you optimum steel welding characteristics. Want to know more? Visit: www.fronius.co.uk or call 08444 721 821
/ Battery Charging Systems / Welding Technology / Solar Electronics
www.welding-and-cutting.info
ThetemPartresi
industrial design, tremendous ease of handling, rugged construction and long service life. This digitally controlled MIG/MAG welding system comes with Steel Transfer Technology to give you optimum steel welding characteristics. Visit: www.fronius.co.uk or call 08444 721 821
/ Battery Charging Systems / Welding Technology
Fachzeitschrift für Schweißen und verwandte Verfahren
SCHWEISSEN
SCHNEIDEN
und
Mehr dazu!
ABIDOT – Das neue, clevere Werkzeug für berührungs-
loses Programmieren von Schweißrobotern …
… einfach anstatt der Gasdüse auf den Brenner schrauben und
die TCP-Programmierung wird zum „Kinderspiel“! Ab sofort ge-
hören lange Programmierzeiten der Vergangenheit an!