PROSAVE MED(CE) ISO 9001/14001 www.prosave.co.kr Top Reliability, Smart Design, Valuable Product and Better Life
PROSAVE
MED(CE) ISO 9001/14001
www.prosave.co.kr
Top Reliability, Smart Design,Valuable Product and Better Life
Water covers 70% of our planet, and it is easy to think that it will always be plentiful. However, Only 3% of the world’s water is fresh water, and two-thirds of that is tucked away in frozen glaciers or otherwise unavailable for our use.
As a result, some 1.1 billion people worldwide lack access to water, and a total of 2.7 billion find water scarce for at least one month of the year. Inadequate sanitation is also a problem for 2.4 billion people—they are exposed to diseases, such as cholera and typhoid fever, and other water-borne illnesses. Two million people, mostly children, die each year from diarrheal diseases alone.
At the current consumption rate, this situation will only get worse. By 2025, two-thirds of the world’s population may face water shortages. The time has come to realize the need and necessity of an efficient distillation device that is not too big, and can easily generate clean water anywhere.
The PROSAVE has developed of atmospheric seawater desalination system using solar thermal energy.We can provide enough clean water in the water scarce regions of the world.
We hope that the people of a country with severe water shortages lead a enjoy an opulent lifestyle & happy life through this water supply.
PROSAVE CO., LTD.
• Water shortage is a serious problem worldwide
• Rapid growth of seawater desalination market
• Solar energy is a promising renewal energy
• Existing desalination technology(RO, MSF, MED) needs electric/thermal energy
• Needs for small capacity-seawater distiller for remote areas
• Development of atmospheric seawater desalination system using solar thermal energy
• Atmospheric seawater desalination system is very suitable for a home unit, village unit and island unit
“ Atmospheric pressure seawater desalination system using renewable energy (solar still)”
Top Reliability, Smart Design, Valuable Product and Better Life _ PROSAVE
• Model HMED is new concept atmospheric pressure seawater distiller which is combined existing solar still and multi-effect distillation technology.
• Main heat source of HMED is solar energy, the use of waste heat of a diesel generator as needed.
• Multi effect distillation method of HMED maximizes fresh water production and heat efficiency by using the latent heat of condensation of evaporated water vapors.
System diagram
Products introduction
Filter
Filter
Seawatertank
Waste heatPump
Waste heat
Seawatertank
HMED HMED
Natural feeding type Pump feeding type
PROSAVE CO., LTD.
Top Reliability, Smart Design, Valuable Product and Better Life _ PROSAVE
• SMED is structured the without Basin part in HMED, and the solar energy is applied to Multi effective distiller in direct.
• Theoretically, by area 1 m² of heat collected fresh water can be made maximum 15~18L, advantages of this device is smaller than the area of HMED installed. Therefore SMED is better than performance of HMED by the cost and area installed.
• Also, because there is not the basin, assembly is simple, maintenance is easy.
System diagram
Products introduction
Filter
FilterSeawater
tankPump
Sea/Fresh Water Case
Fresh WaterTank
ConcentratedBrine Tank
Seawatertank
Sea/Fresh Water Case
Fresh WaterTank
ConcentratedBrine Tank
SMED SMED
Natural feeding type Pump feeding type
Contents HMED SMED Benefits
Components One piece collector/distiller, Pre- & After-treatment system
One piece collector/distiller, Pre- & After-treatment system • Easy to maintain and repair
• Simplified structure without commercial solar thermal collector and heat reservoir
• Five times or more improved performance than existing solar distiller.
• No need for vacuum equipment and vacuum structure
• Use of low-grade heat source such as waste heat
• Stand alone type
Productivity 18~43 L/(m²-d) 15~18 L/(m²-d)
Operation condition Atmosphere pressure Atmosphere pressure
Heat collecting Direct heat exchange Direct heat exchange
Back-up system Waste heat (from Diesel engine)
-
Maintenance Low cost/ Easy Low cost/ Easy
Status Preparation for Pilot plant -
Others •High thermal efficiency
•Ultra-Small to small capacity distiller (0.01~500 m³/day)
-
Compared with existing seawater desalination system
+ Solar heat(main heat source) and waste heat (Back-up heat source) supply to Hybrid solar still (HMED)
+ Condensate production in solar still unit
Fresh water production process of hybrid solar still
+ Seawater supply to multi effect unit + Desalinated water production of the entire multi effect unit
1
3
2
4
PROSAVE CO., LTD.
C
B
A
DH
l
4
3
1
2
The main component of the product
Dimension Table
HMED1. Solar still unit2. Basin unit3. Multi-effect Distillation unit4. Water supply unit5. Other : Diesel generator, Water tank
SMED1. SMED Casing2. Water supply unit3. Multi-effect instillation unit4. Fresh & sea water case
Type HMED 1/2 HMED 1 HMED 2 Note
A 500mm 1000mm 2000mm
• Easy expansion of capacity by a series-parallel connection of models.
B 500mm 1000mm 1000mm
C 440mm 704mm 704mm
D 750mm 1300mm 1300mm
H 1000mm 1500mm 1500mm
L 720mm 1200mm 2200mm
Top Reliability, Smart Design, Valuable Product and Better Life _ PROSAVE
Products
• Air Release Valves• Combination Air Release and Air/Vacuum Valve• Vacuum Breaker Valves• Pilot Operating Pressure/ Vacuum Valves• Surge Relief Valves• Crankcase Explosion Relief Valve• Explosion Venting Devices• VOC Emission Protection Devices• High Velocity Pressure/ Vacuum Valve• Flame Arrester• Flame Screen• Gas Free Cover• Pressure/Vacuum Relief Valve• Hybrid solar still
Application Fields
• Offshore & Ocean Gas Plants• Desalination Plants• Ballast System for Ships & Offshore Plants• Sea & Fresh Water Plants• Marine Tank Ships• Cryogenic gas Facilities• Petrochemical Plants• Tank Terminals• Marine Engines• Generators• Duct• Water shortage Regional
This document is distributed for informational purposes only.It is not to be construed as creating or becoming part of any PROSAVE contractual or warranty obligation unless expressly stated in a written sales contact.
PROSAVE CO., LTD. All Rights Reserved MED(CE) ISO 9001/14001
PIRAEUS(GREECE)
DUBAI(UAE)
TEHERAN(IRAN)
SINGAPORE
DAMMAM(SAUDI ARABIA) KOREA
KUALA LUMPUR(MALAYSIA)
DALIAN(CHINA)CALGARY(CANADA)
STAMFORD(U.S.A)
RIO DE JANEIRO(BRASIL)
CHILE
SHANGHAI(CHINA)GUANGZHOU(CHINA)
XI'AN(CHINA)CYPRUS
MUMBAI(INDIA)
TURKEY
World-Wide Service Network
115-22, Tekeunobaelli 1-ro, Jillye-myeon, Gimhae-si, Gyeongsangnam-do 50875, Korea TEL. +82 (0)55 313 3510~1 FAX. +82 (0)55 313 3512E-mail: [email protected] www.prosave.co.kr
ISO9001 / ISO14001 Registered
PROSAVE CO., LTD.