Giving future... medin-cno · Gentle breathing support and monitoring of premature and time born infants
Giving future...
medin-cno· Gentle breathing support and monitoring of premature and time born infants
Distributors worldwide
www.medin-innovations.com
Phone: +49 89 89670950
Fax: +49 89 80048476
Medical Innovations GmbH
Lindberghstr. 1
D·82178 Puchheim
Your distributor:
ww
w.s
chle
ich-w
erb
ung.
de
Miniflow Medijet© medin-cnosindiDriver
Austria · Australia · Azerbai-
jan · Bangladesh · Belarus
Belgium · Canada · China
Columbia · United Arab
Emirates · Costa Rica
Egypt · Czech Republic
Denmark · Estonia · Finland
France · Germany · Greece
Great Britain · Hong Kong
Hungary · India · Indonesia
Iran · Ireland · Israel
Italy · Japan · Jordania
Kazakhstan · Kenya
Kirgistan · Korea · Kuwait
Latvia · Lithuania · Luxem-
bourg · Malaysia · Marocco
Mexico · Moldavia · Nether-
lands · Norway · Pakistan
Peru · Poland · Russia
Saudi Arabia · Singapore
Slovenia · Slovakia · South
Africa · Spain · Sri Lanka
Surinam · Sweden · Switzer-
land · Syria · Thailand
Taschikistan · Turkey · Ukraine
Certification in accordance with DIN EN ISO 9001 and DIN EN ISO 13485,
Annex II section 3 of the Council Directive 93/42/EEC
The new medin-cno
Medin-cno is used as stationary nCPAP driver for the nCPAP therapy of
neonates and premature infants treated in combination with the nCPAP
generator Medijet© in intensive care units.
Medin-cno may only be used in combination with simultaneous and con-
stant hemodynamic monitoring of the patient, only by trained medical
personnel and only during clinical use.
medin-cno · modes & facts
©
perfect combination in use
with medin cno driver
Medin-cno offers a basic nCPAP mode for neonates and premature infants. In
this mode the device creates in combination with the nCPAP generator Medijet©
a constant positive airway pressure (CPAP). The user adjusts therefore the
CPAP pressure and the necessary oxygen concentration. Various alarms help
to monitor the patient and the adjusted parameters. If necessary the user can
activate a push (= a higher CPAP level for a short time) manually.
This mode combines the basic CPAP with apnea detection. The normal CPAP
is identical to the CPAP mode. But if apnea is detected medin-cno triggers
automatically a push. Additionally the user can manually activate this push.
Medin-cno offers in this mode a CPAP based on two different pressure levels.
The length of time of both pressure levels is adjustable by the user as well as
the trigger for the change.
In the oscillation mode medin-cno creates a high-frequency oscillation modu-
lated to a basic CPAP. The basic CPAP level, the oxygen concentration, the
frequency and the amplitude are chosen according to the patient’s needs by
the users.
CPAP
technical data & facts
Apnoea CPAP
SNIPPVSynchronized non invasive pressure
ventilation
Oscillation
Classification IIb
Size of the device
incl. connectors
29cm x 23,5cm x 18cm
(W x H x D)
Weight 4,75kg
Display 7.0’’ – multicolor, 800 x 400 Pixel
Shown values · CPAP pressure
· CPAP pressure curve (diagram)
· Flow
· Oxygen concentration
· Respiration rate
Electric support
Power supply (mains)
Battery
100-240 V AC / 50-60Hz
24 V DC, 2 hrs. (Bat. operation mode)
Gas supply – Air 3 – 6 bar
Gas supply – O2
3 – 6 bar
Parameters and Sensors
CPAP pressure
Oxygen concentration
Safety valves:
0 - 15 cm H20
21% to 100% oxygen
Mechanical overpressure valve
Electric shut off valve
Oxygen sensor OOM 102 (easy to exchange)
Connectors
Gas supply connectors
Patient gas output
Patient pressure port
DISS or NIST standard
M22 / F 15
Luer
Mounting On hospital rails (10 x 25 mm)
Modes · CPAP
· Apnea monitored CPAP with automatic push function
· Oscillation
· SNIPPV
Alarms · Disconnection
· Over pressure
· High CPAP pressure (adjustable)
· Low CPAP pressure (adjustable)
· Oxygen concentration
· Gas supply pressure air
· Gas supply pressure O2
Alarm signals Optical, acoustical and text message
Connection to external
central alarm system
Optional
Data handling
Actual data
Internal data recording
External data interface
Shown at the display
8 hours
USB
Accessories
Combinable nCPAP generators
Tube circuits
Medijet® 1000, Medijet® 1010, Medijet®1020
Various tube circuits for all kind of humidifiers available
The new medin-cno
Medin-cno is used as stationary nCPAP driver for the nCPAP therapy of
neonates and premature infants treated in combination with the nCPAP
generator Medijet© in intensive care units.
Medin-cno may only be used in combination with simultaneous and con-
stant hemodynamic monitoring of the patient, only by trained medical
personnel and only during clinical use.
medin-cno · modes & facts
©
perfect combination in use
with medin cno driver
Medin-cno offers a basic nCPAP mode for neonates and premature infants. In
this mode the device creates in combination with the nCPAP generator Medijet©
a constant positive airway pressure (CPAP). The user adjusts therefore the
CPAP pressure and the necessary oxygen concentration. Various alarms help
to monitor the patient and the adjusted parameters. If necessary the user can
activate a push (= a higher CPAP level for a short time) manually.
This mode combines the basic CPAP with apnea detection. The normal CPAP
is identical to the CPAP mode. But if apnea is detected medin-cno triggers
automatically a push. Additionally the user can manually activate this push.
Medin-cno offers in this mode a CPAP based on two different pressure levels.
The length of time of both pressure levels is adjustable by the user as well as
the trigger for the change.
In the oscillation mode medin-cno creates a high-frequency oscillation modu-
lated to a basic CPAP. The basic CPAP level, the oxygen concentration, the
frequency and the amplitude are chosen according to the patient’s needs by
the users.
CPAP
technical data & facts
Apnoea CPAP
SNIPPVSynchronized non invasive pressure
ventilation
Oscillation
Classification IIb
Size of the device
incl. connectors
29cm x 23,5cm x 18cm
(W x H x D)
Weight 4,75kg
Display 7.0’’ – multicolor, 800 x 400 Pixel
Shown values · CPAP pressure
· CPAP pressure curve (diagram)
· Flow
· Oxygen concentration
· Respiration rate
Electric support
Power supply (mains)
Battery
100-240 V AC / 50-60Hz
24 V DC, 2 hrs. (Bat. operation mode)
Gas supply – Air 3 – 6 bar
Gas supply – O2
3 – 6 bar
Parameters and Sensors
CPAP pressure
Oxygen concentration
Safety valves:
0 - 15 cm H20
21% to 100% oxygen
Mechanical overpressure valve
Electric shut off valve
Oxygen sensor OOM 102 (easy to exchange)
Connectors
Gas supply connectors
Patient gas output
Patient pressure port
DISS or NIST standard
M22 / F 15
Luer
Mounting On hospital rails (10 x 25 mm)
Modes · CPAP
· Apnea monitored CPAP with automatic push function
· Oscillation
· SNIPPV
Alarms · Disconnection
· Over pressure
· High CPAP pressure (adjustable)
· Low CPAP pressure (adjustable)
· Oxygen concentration
· Gas supply pressure air
· Gas supply pressure O2
Alarm signals Optical, acoustical and text message
Connection to external
central alarm system
Optional
Data handling
Actual data
Internal data recording
External data interface
Shown at the display
8 hours
USB
Accessories
Combinable nCPAP generators
Tube circuits
Medijet® 1000, Medijet® 1010, Medijet®1020
Various tube circuits for all kind of humidifiers available
Giving future...
medin-cno· Gentle breathing support and monitoring of premature and time born infants
Distributors worldwide
www.medin-innovations.com
Phone: +49 89 89670950
Fax: +49 89 80048476
Medical Innovations GmbH
Lindberghstr. 1
D·82178 Puchheim
Your distributor:
ww
w.s
chle
ich-w
erb
ung.
de
Miniflow Medijet© medin-cnosindiDriver
Austria · Australia · Azerbai-
jan · Bangladesh · Belarus
Belgium · Canada · China
Columbia · United Arab
Emirates · Costa Rica
Egypt · Czech Republic
Denmark · Estonia · Finland
France · Germany · Greece
Great Britain · Hong Kong
Hungary · India · Indonesia
Iran · Ireland · Israel
Italy · Japan · Jordania
Kazakhstan · Kenya
Kirgistan · Korea · Kuwait
Latvia · Lithuania · Luxem-
bourg · Malaysia · Marocco
Mexico · Moldavia · Nether-
lands · Norway · Pakistan
Peru · Poland · Russia
Saudi Arabia · Singapore
Slovenia · Slovakia · South
Africa · Spain · Sri Lanka
Surinam · Sweden · Switzer-
land · Syria · Thailand
Taschikistan · Turkey · Ukraine
Certification in accordance with DIN EN ISO 9001 and DIN EN ISO 13485,
Annex II section 3 of the Council Directive 93/42/EEC