Mechanical - KINETROL...Socket weld (solid machined) Thermowell form: Tapered, straight or stepped Welding collar diameter: 1.050, 1.315 or 1.900 inch (26.7, 33.4 or 48.3 mm) Pressure

Product review

Mechanical temperature measuring instruments

2

Contents

WIKA product lines 3

Bimetal thermometers 4

Gas actuated thermometers 6

Expansion thermometers 7

Special products, types of connections 7

Thermowells 8

Technical information 10

Further products for temperature measurement 14

WIKA worldwide 16

Part of your business

Efficient logistics Fully automatic production

Certified calibration laboratories

Ability to meet any challengeAs a family-run business acting globally, with over 9,000 highly qualified employees, the WIKA group of companies is a worldwide leader in pressure and temperature measurement. The company also sets the standard in the measurement of level and flow, and in calibration technology. Founded in 1946, WIKA is today a strong and reliable partner for all the requirements of industrial measurement technology, thanks to a broad portfolio of high-precision instruments and comprehensive services.

With manufacturing locations around the globe, WIKA ensures flexibility and the highest delivery performance. Every year, over 50 million quality products, both standard and customer-specific solutions, are delivered in batches of 1 to over 10,000 units. With numerous wholly-owned subsidiaries and partners, WIKA competently and reliably supports its customers worldwide. Our experienced engineers and sales experts are your competent and dependable contacts locally.

3

WIKA product lines

For all product lines product reviews are available.

The WIKA programme covers the following product lines for various fields of application.

WIKA product lines

Electronic pressure measurementWIKA offers a complete range of electronic pressure measuring instruments: pressure sensors, pressure switches, pressure transmitters and process transmitters for the measurement of gauge, absolute and differential pressure. Our pressure measuring instruments are available in the measuring ranges 0 … 0.6 mbar to 0 … 15,000 bar. These instruments come supplied with standardised current or voltage output signals (also intrinsically safe per ATEX or with flameproof enclosure), interfaces and protocols for various field buses. Whether ceramic thick film, metal thin film or piezo-resistive, WIKA is the leading manufacturer worldwide that develops and produces the full range of today’s leading sensor technologies.

Mechatronic pressure measurementAs a result of the almost unlimited options for different combinations of mechanical and electrical connections, an extraordinary range of instrument variants is possible. Various digital and analogue output signals are also available for these measuring instruments.For our measuring instruments we use latest sensors, tested in automotive applications millions of times over. They work without any kind of mechanical contact, consequently they are wear-resistant, and there's absolutely no influence on the mechanics.

Mechanical pressure measurementIndicating pressure gauges for gauge, absolute and differential pressure with Bourdon tube, diaphragm or capsule pressure elements have been tested millions of times over. These instruments cover scale ranges from 0 … 0.5 mbar to 0 … 7,000 bar and indication accuracies of up to 0.1 %.

Diaphragm sealsWIKA diaphragm seals, mounted with pressure gauges, pressure transducers, pressure transmitters etc., are recognised and valued internationally for the most difficult of measuring tasks. The measuring instruments can therefore be used at extreme temperatures (-130 … +400 °C), and with aggressive, corrosive, heterogeneous, abrasive, highly viscous or toxic media. The optimal diaphragm seal designs, materials and filling media are available for each application.

Electrical temperature measurementOur range of products includes thermocouples, resistance thermometers (also with on-site display), temperature switches as well as analogue and digital temperature transmitters for all industrial applications. Measuring ranges from -200 … +1,700 °C are covered.

Mechatronic temperature measurementAs a result of the integration of switch contacts and output signals into our mechanical temperature measuring instruments, we can offer a wide variety of combined instruments. With switch con-tacts the pointer position triggers a change-over. Electrical output signals are realised via an additional, independent sensor circuit (resistance thermometer or thermocouple).

Mechanical temperature measurementThe mechanical temperature measuring instruments work on the bimetal, expansion or gas actuation principle and cover scale ranges from -200 … +700 °C. All thermometers are suited for operation in a thermowell if necessary.

Level measurementWIKA has a comprehensive range of level measuring in-struments available for temperatures up to 450 °C, specific gravity from 400 kg/m³ and pressure ranges up to 500 bar. This includes standard instruments and customised products.

Flow measurementOrifice plates, meter runs, flow nozzles, Venturi tubes and pitot tubes are part of our portfolio of primary flow elements and restriction orifices. The wide range of our products is able to cover the majority of industrial applications. Customised solutions can be developed to meet your special needs.

Calibration technologyWIKA offers a broad product range of calibration instruments for the physical units of measurement for pressure and temperature, and for electrical measurands. Numerous patents ensure unmatched performance from many of our calibration instruments. The range of services covers the calibration of pressure and temperature measuring instruments in our accredited DKD/DAkkS calibration laboratories and a mobile service to calibrate your instruments on site.

4

Bimetal thermometers

A50Standard version

Nominal size: 63, 80, 100, 160 mmScale range: -30 … +200 °CPermissible operating pres-sure at thermowell/stem: Max. 6 barWetted parts: Copper alloyData sheet: TM 50.03

52Industrial series, axial and radial

Nominal size: 25, 33, 40, 50, 63, 80, 100, 160 mm

Scale range: -30 … +50 to 0 … +500 °CPermissible operating pres-sure at thermowell/stem: Max. 25 barWetted parts: Stainless steelData sheet: TM 52.01

A51 Industrial heating, high-quality version

Nominal size: 63, 80, 100 mmScale range: -30 … +250 °CPermissible operating pres-sure at thermowell/stem: Max. 6 barWetted parts: Copper alloyData sheet: TM 51.01

A46Industrial heating

Nominal size: 50, 63, 80, 100 mmScale range: -30 ... +120 °CPermissible operating pres-sure at thermowell/stem: Max. 6 barWetted parts: Copper alloyData sheet: TM 46.02

A48Refrigeration and air conditioning

Nominal size: 63, 80, 100, 160 mmScale range: -30 … +120 °CWetted parts: Copper alloyData sheet: TM 48.01

A43Industrial heating, Standard version

Nominal size: 63, 80, 100 mmScale range: 0 … 120 °CPermissible operating pres-sure at thermowell/stem: Max. 6 barWetted parts: BrassData sheet: TM 43.01

5Further information at www.wika.com

Bimetal thermometers

53Industrial series, axial, adjustable stem dial

Nominal size: 3", 5"Scale range: -70 … +70 to 0 … +600 °CWetted parts: Stainless steelOption: Liquid damping to max. 250 °C

(case and sensor)Data sheet: TM 53.01

54Heavy duty series, axial and radial, adjustable stem and dial

Nominal size: 63, 80, 100, 160 mmScale range: -70 … +70 to 0 … +600 °CWetted parts: Stainless steelOption: Liquid damping to max. 250 °C


55Stainless steel series, axial and radial, adjustable stem and dial

Nominal size: 63, 100, 160 mmScale range: -70 … +70 to 0 … +600 °CWetted parts: Stainless steelOption: Liquid damping to max. 250 °C


GL

6

Gas-actuated thermometersGas-actuated thermometers

R73, S73, A73Axial and radial, adjustable stem and dial

Nominal size: 100, 160 mmScale range: -200 … +50 to 0 … +700 °CWetted parts: Stainless steelOption: ■ Liquid damping (case)

■ Contact bulbData sheet: TM 73.01

F73With capillary

Nominal size: 100, 160 mmScale range: -200 … +50 to 0 … +700 °CWetted parts: Stainless steelOption: ■ Armoured or coated capillary

(PVC coating) ■ Liquid damping (case) ■ Contact bulb

Data sheet: TM 73.01

74For sanitary applications

Nominal size: 100 mmScale range: ■ 0 … 120 or 0 … 160 °C

■ -20 … +100 and -30 … +50 °C Wetted parts: Stainless steel 1.4435Option: ■ Liquid damping (case)

■ Wetted parts with electropolished surface


75Highly vibration resistant

Nominal size: 100 mmScale range: 0 … +700 or -50 … +650 °CWetted parts: Stainless steelOption: Various neck-tube and insertion lengthsData sheet: TM 75.01

®


Expansion thermometers,Special products, types of connections

Expansion thermometers

Special products, types of connections

70High-quality version

Nominal size: 63, 100, 160 mmScale range: -60 … +400 °CWetted parts: Stainless steelOption: ■ Liquid damping (case)

■ Indication accuracy class 1 ■ With micro switch


IFCStandard version

Nominal size: 52, 60, 80, 100 mm48 x 48, 72 x 72, 96 x 96 mm

Scale range: -100 … +400 °CWetted parts: Copper alloyOption: ■ Square case version

■ Other case materials ■ With micro switch


32Machine glass thermometer, V-form

Nominal size: 110, 150, 200 mmScale range: -30 … +200 °CWetted parts: Copper alloyOption: ■ Dual scale °F/°C

■ 3 designs: straight, 90° and 135°Data sheet: TM 32.02

Compression fittings

Application: Suitable for thermometers with plain stem (design of connection 1)

Material: Stainless steelOperating range: Max. 600 °C

Double nipple version

Application: Suitable for thermometers with union nut (design of connection 3)


Neck tubes


TF58, TF59Standard version

Nominal size: 58 x 25 mm, 62 x 11 mmScale range: -50 … 250 °CWetted parts: Copper alloyOption: ■ Vertical arrangement

■ Special scales ■ Other case materials


8

Thermowells

TW22Fabricated with flange connection for sanitary applications

Aseptic connection: ■ DIN 11851 ■ DIN 32676 ■ Tri-clamp ■ VARIVENT®

■ BioControl®Thermowell material: Stainless steel 1.4435Data sheet: TW 95.22

TW10Flanged (solid-machined)

Thermowell form: Tapered, straight or steppedNominal size: ASME 1 … 4 inch

(DIN/EN DN 25 … 100)Pressure rating: ASME to 2,500 psig (DIN/EN to PN 100)Data sheet: TW 95.10, TW 95.11, TW 95.12

TW15Screw-in (solid machined)

Thermowell form: Tapered, straight or steppedHead version: Hexagon, round with hexagon, or round

with spanner flatsProcess connection: ½, ¾ or 1 NPTData sheet: TW 95.15

TW20Socket weld (solid machined)

Thermowell form: Tapered, straight or steppedWelding collar diameter:

1.050, 1.315 or 1.900 inch (26.7, 33.4 or 48.3 mm)

Pressure rating: 3,000 or 6,000 psigData sheet: TW 95.20

TW25Weld–in (solid-machined)

Thermowell form: Tapered, straight or steppedHead diameter: Up to 2 inch (50.8 mm)Data sheet: TW 95.25

TW30Vanstone (solid-machined) for lap flanges

Thermowell form: Tapered, straight or steppedNominal size: ASME 1, 1½ or 2 inchPressure rating: ASME up to 2,500 psigData sheet: TW 95.30

VARIVENT® is a registered trademark of the company TuchenhagenBioControl® is a registered trademark of the company NEUMO

®

TYPE EL - CLASS IJUNE 2011


Thermowells

TW35Threaded (fabricated) (DIN 43772 form 2, 2G, 3, 3G)

Thermowell form: Form 2, 2G, 3 or 3GMaterial: Stainless steelInstrument connection: M24 x 1.5 rotatableData sheet: TW 95.35

TW40Flanged (fabricated) (DIN 43772 form 2F, 3F)

Thermowell form: Form 2F or 3FNominal size: DIN/EN DN 25 … 50 (ASME 1 … 2 inch)Pressure rating: DIN/EN up to PN 100

(ASME up to 1,500 psig)Data sheet: TW 95.40

TW45Screw-in (fabricated) (DIN 43772 form 5, 8)

Thermowell form: Form 5 or 8Material: Stainless steel or copper alloyData sheet: TW 95.45

TW50Screw-in (solid-machined) (DIN 43772 form 6, 7, 9)

Thermowell form: Form 6, 7 or 9Data sheet: TW 95.50

TW55Weld-in or flanged (solid- machined) (DIN 43772 form 4, 4F)

Thermowell form: Form 4 or 4FNominal size: DIN/EN DN 25 … 50 (ASME 1 … 2 inch)Pressure rating: DIN/EN up to PN 100

(ASME up to 2,500 psig)Data sheet: TW 95.55

10

Flange disc option for special materialsThe design with a flange disc is available for solid machined or fabricated flanged thermowells. In this design, the flange disc material is matched to the material of the thermowell shaft; the non-wetted flange is manufactured from stainless steel. The flange disc is welded to the thermowell and the stainless steel flange, so that all the parts form a single unit. After welding, the sealing face of the flange disc is turned to the required surface roughness.

The flange disc design is used when chemically aggressive pro-cess media require the use of special materials, while the flange, for cost considerations, can be manufactured from stainless steel.Usually 316/316L stainless steel is used as flange material. The weld seam used is a double fillet weld between all components.

Welding options

Note: The main advantage of this design is the cost-saving over a complete construction from special materials. However, due to the design, an air gap exists between the stainless steel flange and the flange disc, which could be detrimental in critical processes.

WIKA thermowells are available both in solid machined and fabri-cated designs. The variants offered include designs with flanges, with threads and for welding. Furthermore, thermowells are avail-able in Vanstone design and with sterile process engineering con-nections. The choice of material and manufacturing to customer requirements ensure optimal protection of the sensor and accurate measurements. Thermowells with flanges can be manufactured with double fillet weld, penetration weld or in threaded weld de-signs.

Thermowells

A full-penetration weld seam guarantees a complete joining of the flange and the thermowell, and thus the strongest welded joint. The double fillet weld offers a good alternative with its excellent stability.

Thermowells in threaded weld design consist of a thermowell with a 1-NPT thread, which is screwed into a threaded flange. In addition, the thermowell is secured on one or both sides by a weld seam.

Weld seam

Flange

Thermowell

Full-penetration weld version Welding on both sides Thread-welded design

Weld seam Weld seam

FlangeFlange

Thermowell Thermowell

1 NPT

Weld seam

Weld seam

Thermowell

Flange from stainless steel

Flange disc from special material

11

Technical information

Non-destructive test/evaluation

NDE or NDTNDE/NDT are abbreviations for “Non-Destructive Examination”/“Non-Destructive Testing”. The abbreviations NDE or NDT stand for “Non-Destructive Examination” or “Non-Destructive Testing”, respectively. This is used to refer to non-destructive inspections or tests of components, in general.

Liquid penetrant inspectionWith the penetrant test in accordance with DIN EN ISO 3452-1 or SNT-TC-1A, fine surface cracks and porosities in weld seams can be made visible. After cleaning the surface to be inspected, a con-trast agent (red or fluorescent) is sprayed on. Through the capillary effect, this agent penetrates any surface defects there might be. After re-cleaning the surface, a developer (white) is then sprayed on, which extracts the contrast agent (from any hairline cracks, etc.) and through colour contrast, enables an easy evaluation of the defects.

X-ray testingThrough an X-ray test to DIN EN ISO 1763-1 or ASME Section V, Article 2, Edition 2015, for example, full penetration welds on thermowells can be investigated with respect to irregularities (cracks, voids, insufficient bonding). Here, depending on the dimensions of the thermowell, up to five X-ray images may be necessary to determine irregularities with sizes < 0.5 mm in the full-penetration weld. An X-ray examination can also be used to record the bore centrality in solid body material thermowells. For this purpose, two images of the thermowell tip at 90° to each other are required.

Pressure and stability testsThe hydrostatic pressure test is a pressure and stability test of the components of a thermowell following AD 2000 code of practice HP30. For the test, the thermowell is clamped into a testing device and subjected to a defined test pressure at room temperature for a certain period of time (e.g. three minutes). In general, a distinction is made between the outside and inside pressure test. A typical pressure is 1.5 times the nominal pressure of the flange as outside pressure or 500 bar as inside pressure.

Helium leak testFor leak testing in accordance with DIN EN 1779 (1999)/EN 13185, helium 4.6 is used as a test gas. The test is able to detect minimal leakage rates and is considered the most sensitive test method for leak testing. In general, one should distinguish between an integral and local test method. In the integral test, leak rates (e.g. 1x10-7 mbar * l / s) can be determined, while the local testing enables the location of the leak to be determined using a spray probe.

Ultrasonic testThrough an ultrasonic test in accordance with DIN EN ISO 17640, for example, full penetration weld seams on thermowells can be investigated with respect to irregularities (cracks, voids, insufficient bonding). For this, the reflections of a radiated ultrasound signal are measured at the interfaces of irregularities. To determine the position of the irregularities, the ultrasonic device is adjusted beforehand by means of a reference body. The ultrasonic test can also be used to measure the wall thicknesses of a thermowell from solid body material to determine the bore centrality.

Positive material identification test (PMI)The PMI (positive material identification) test proves which alloy constituents exist in the material. There are various common test procedures. With optical emission spectroscopy (OES), an arc is generated between the thermowell surface and the test equipment, and the spectrum of this arc enables the alloy’s elements to be identified – both qualitatively and quantitatively. This process does leave a characteristic burn mark on the workpiece. A test procedure which doesn’t damage the surface is the X-ray analysis; during the X-ray the atoms of the thermowell material are energised until they radiate themselves. The wavelength and intensity of the emitted radiation is again a measure of the alloy’s constituent elements and their concentrations.

12

Flange form

Standard flange sealing faces per ASME B16.5

AARH (µinch) Ra (µm)

Stock finish 125 … 250 3.2 … 6.3

Smooth finish < 125 < 3.2

RTJ (Ring joint groove) < 63 < 1.6

Tongue/groove < 125 < 3.2

Standard flange sealing faces to DIN 2527

Ra (µm) Rz (µm)

Form C - 40 … 160

Form E - < 16

Standard flange sealing faces to EN 1092-1

Ra (µm) Rz (µm)

Form B1 3.2 … 12.5 12.5 … 50

Form B2 0.8 … 3.2 3.2 … 12.5

For flanges in accordance with the standards ASME B16.5, EN 1092-1 and DIN 2527 there are different sealing face forms and surface finishes in use. The most commonly-used sealing face of all the standards is the version with offset sealing tongue with spi-ral phonographic grooves in the sealing face. The form and depth of the grooves is defined in the corresponding flange standards.

Less common in thermowells are flanges with smooth sealing faces without detectable grooves or designs with concentric, con-tinuous grooves.

To assist in the design of the thermowell, a separate spreadsheet is provided. This enables the dimensions to be determined for tapered and straight thermowells on which the process medium flow in the pipeline causes vibration or stress. Invalid value inputs or results that are outside the permissible limits can thus be identi-fied. The calculation includes a wide range of standard and special materials.

Flange sealing faces on thermowells

Thermowell design

13

Technical information

Mechanical temperature measuring instrumentsTemperature is an indicator of the thermal condition of a homogenous material or body that expresses the energy of motion that is contained in the molecules of the material. A close thermal contact between two bodies is needed in order that these bodies adopt the same temperature (temperature equalisation). The body to be measured should be coupled as closely as possible to the temperature sensor system.The most established temperature measurement methods are based on material or body properties that change depending on the temperature. We manufacture temperature measuring instruments to the following measuring principles:

Bimetal thermometersOperating principleA strip, made from two securely laminated rolled sheets, with met-als having different coefficients of expansion ("bimetal"), will bend on any temperature change.This causes the strip to deflect in proportion to the temperature variation. The actual bimetal system consists of a bimetal strip that is either

� a helical bourdon tube or a � spiral tube

Through mechanical deformation of the bimetal strip in the afore-mentioned spring forms, a rotational movement occurs when the temperature changes.If one end of the bimetal measuring system is fixed securely, the other will rotate the pointer shaft.The scale ranges are between -70 and +600 °C with an accuracy class 1 and 2 in accordance with EN 13190.

Expansion thermometersOperating principleThe measured value registration is made through the liquid-filled measuring system which consists of a temperature probe, capillary and Bourdon tube. All three components combine to form a closed tube system.

The internal pressure in the system changes with the adjacent temperature. This causes the pointer axis connected to the spring to turn and the temperature value to be displayed on the scale. The capillary, with lengths between 500 and 10,000 mm also enables measurements to be made on remote measuring points.The scale ranges are between -40 and +400 °C with accuracy classes 1 and 2 in accordance with EN 13190.

Gas-actuated thermometers with or without capillary

Operating principleThe measuring system consists of a stem, capillary and Bourdon tube in the case. These parts are combined to form a single unit. The entire measuring system is filled with an inert gas under pres-sure.Any change in temperature causes a change in internal pressure in the stem. The pressure deforms the Bourdon tube and the de-flection is transferred to the pointer via a dial movement.

Variations in the ambient temperature acting on the case are compensated for by a bimetal element mounted between the movement and the Bourdon tube.The scale ranges are between -200 and +700 °C with an accuracy class 1 in accordance with EN 13190.

14

Further products for temperature measurement

Fittings Electrical thermometers Digital indicators & controllers

Temperature transmitters Hand-held measuring instruments Temperature calibrators


Additional products

Infrared hand-held thermometers Transmitter with digital display

Data collection and software Longlife digital thermometer

WIKA Alexander Wiegand SE & Co. KGAlexander-Wiegand-Straße 30∙63911 Klingenberg∙GermanyTel. +49 9372 132-0∙Fax +49 9372 [email protected]∙www.wika.de

Europe

AustriaWIKA MessgerätevertriebUrsula Wiegand GmbH & Co. KGPerfektastr. 731230 ViennaTel. +43 1 8691631Fax: +43 1 [email protected]

BelarusWIKA BelrusUl. Zaharova 50B, Office 3H220088 MinskTel. +375 17 2945711Fax: +375 17 [email protected]

BeneluxWIKA BeneluxIndustrial estate De BerkNewtonweg 126101 WX EchtTel. +31 475 535500Fax: +31 475 [email protected]

BulgariaWIKA Bulgaria EOODAkad.Ivan Geshov Blvd. 2EBusiness Center Serdika, office 3/1041330 SofiaTel. +359 2 82138-10Fax: +359 2 [email protected]

CroatiaWIKA Croatia d.o.o.Hrastovicka 1910250 Zagreb-LuckoTel. +385 1 6531-034Fax: +385 1 [email protected]

FinlandWIKA Finland OyMelkonkatu 2400210 HelsinkiTel. +358 9 682492-0Fax: +358 9 [email protected]

FranceWIKA Instruments s.a.r.l.Immeuble Le Trident38 avenue du Gros Chêne95220 HerblayTel. +33 1 787049-46Fax: +33 1 [email protected]

GermanyWIKA Alexander Wiegand SE & Co. KGAlexander-Wiegand-Str. 3063911 KlingenbergTel. +49 9372 132-0Fax: +49 9372 [email protected]

ItalyWIKA Italia S.r.l. & C. S.a.s.Via G. Marconi 820020 Arese (Milano)Tel. +39 02 93861-1Fax: +39 02 [email protected]

PolandWIKA Polska spółka z ograniczoną odpowiedzialnością sp. k.Ul. Legska 29/3587-800 WloclawekTel. +48 54 230110-0Fax: +48 54 [email protected]

RomaniaWIKA Instruments Romania S.R.L.050897 BucurestiCalea Rahovei Nr. 266-268Corp 61, Etaj 1Tel. +40 21 4048327Fax: +40 21 [email protected]

RussiaAO WIKA MERAWjatskaya Str. 27, Building 17Office 205/206127015 MoscowTel. +7 495-648018-0Fax: +7 [email protected]

SerbiaWIKA Merna Tehnika d.o.o.Sime Solaje 1511060 BeogradTel. +381 11 2763722Fax: +381 11 [email protected]

SpainInstrumentos WIKA S.A.U.C/Josep Carner, 11-1708205 Sabadell BarcelonaTel. +34 933 9386-30Fax: +34 933 [email protected]

SwitzerlandMANOMETER AGIndustriestrasse 116285 HitzkirchTel. +41 41 91972-72Fax: +41 41 [email protected]

TurkeyWIKA Instruments IstanbulBasinc ve Sicaklik Ölcme CihazlariIth. Ihr. ve Tic. Ltd. Sti.Bayraktar Bulvari No. 1734775 Yukari Dudullu - IstanbulTel. +90 216 41590-66Fax: +90 216 [email protected]

UkraineTOV WIKA PryladM. Raskovoy Str. 11, APO 20002660 KyivTel. +38 044 4968380Fax: +38 044 [email protected]

United KingdomWIKA Instruments LtdMerstham, Redhill RH13LGTel. +44 1737 644-008Fax: +44 1737 [email protected]

North America

CanadaWIKA Instruments Ltd.Head Office3103 Parsons RoadEdmonton, Alberta, T6N 1C8Tel. +1 780 4637035Fax: +1 780 [email protected]

USAWIKA Instrument, LP1000 Wiegand BoulevardLawrenceville, GA 30043Tel. +1 770 5138200Fax: +1 770 [email protected]

Gayesco-WIKA USA, LP229 Beltway Green BoulevardPasadena, TX 77503Tel. +1 713 47500-22Fax: +1 713 [email protected]

Mensor Corporation201 Barnes DriveSan Marcos, TX 78666Tel. +1 512 396-4200Fax: +1 512 [email protected]

Latin America

ArgentinaWIKA Argentina S.A.Gral. Lavalle 3568(B1603AUH) Villa MartelliBuenos AiresTel. +54 11 47301800Fax: +54 11 [email protected]

BrazilWIKA do Brasil Ind. e Com. Ltda.Av. Úrsula Wiegand, 0318560-000 Iperó - SPTel. +55 15 3459-9700 Fax: +55 15 [email protected]

ChileWIKA Chile S.p.A.Av. Coronel Pereira 72Oficina 101Las Condes - Santiago de ChileTel. +56 2 [email protected]

ColombiaInstrumentos WIKA Colombia S.A.S.Dorado Plaza,Avenida Calle 26 No. 85D – 55Local 126 y 126 ABogotá – ColombiaTel. +57 1 744 [email protected]

MexicoInstrumentos WIKA Mexico S.A. de C.V.Viena 20 Ofna 301Col. Juarez, Del. Cuauthemoc06600 Mexico D.F.Tel. +52 55 50205300Fax: +52 55 [email protected]

Asia

AzerbaijanWIKA Azerbaijan LLCCaspian Business Center9th floor 40 J.Jabbarli str.AZ1065 BakuTel. +994 12 49704-61Fax: +994 12 [email protected]

ChinaWIKA Instrumentation Suzhou Co., Ltd.81, Ta Yuan Road, SNDSuzhou 215011Tel. +86 512 6878 8000Fax: +86 512 6809 [email protected]

IndiaWIKA Instruments India Pvt. Ltd.Village Kesnand, WagholiPune - 412 207Tel. +91 20 66293-200Fax: +91 20 [email protected]

IranWIKA Instrumentation Pars Kish (KFZ) Ltd.Apt. 307, 3rd Floor8-12 Vanak St., Vanak Sq., TehranTel. +98 21 88206-596Fax: +98 21 [email protected]

JapanWIKA Japan K. K.MG Shibaura Bldg. 6F1-8-4, Shibaura, Minato-kuTokyo 105-0023Tel. +81 3 5439-6673Fax: +81 3 [email protected]

KazakhstanTOO WIKA KazakhstanRaimbekstr. 169, 3rd floor050050 AlmatyTel. +7 727 2330848Fax: +7 727 [email protected]

KoreaWIKA Korea Ltd.39 Gajangsaneopseo-ro Osan-siGyeonggi-do 447-210Tel. +82 2 86905-05Fax: +82 2 [email protected]

MalaysiaWIKA Instrumentation (M) Sdn. Bhd.No. 23, Jalan Jurukur U1/19Hicom Glenmarie Industrial Park40150 Shah Alam, SelangorTel. +60 3 5590 [email protected]

PhilippinesWIKA Instruments Philippines, Inc.Unit 102 Skyway Twin Towers351 Capt. Henry Javier St.Bgy. Oranbo, Pasig City 1600Tel. +63 2 234-1270Fax: +63 2 [email protected]

SingaporeWIKA Instrumentation Pte. Ltd.13 Kian Teck Crescent628878 SingaporeTel. +65 6844 5506Fax: +65 6844 [email protected]

TaiwanWIKA Instrumentation Taiwan Ltd.Min-Tsu Road, Pinjen32451 TaoyuanTel. +886 3 420 6052Fax: +886 3 490 [email protected]

ThailandWIKA Instrumentation Corporation (Thailand) Co., Ltd.850/7 Ladkrabang Road, LadkrabangBangkok 10520Tel. +66 2 32668-73Fax: +66 2 [email protected]

Africa / Middle East

EgyptWIKA Near East Ltd.Villa No. 6, Mohamed FahmyElmohdar St. - of Eltayaran St.1st District - Nasr City - CairoTel. +20 2 240 13130Fax: +20 2 240 [email protected]

NamibiaWIKA Instruments Namibia Pty Ltd.P.O. Box 31263PioniersparkWindhoekTel. +26 4 61238811Fax: +26 4 [email protected]

South AfricaWIKA Instruments Pty. Ltd.Chilvers Street, DenverJohannesburg, 2094Tel. +27 11 62100-00Fax: +27 11 [email protected]

United Arab EmiratesWIKA Middle East FZEWarehouse No. RB08JB02P.O. Box 17492Jebel Ali, DubaiTel. +971 4 883-9090Fax: +971 4 [email protected]

Australia

AustraliaWIKA Australia Pty. Ltd.Unit K, 10-16 South StreetRydalmere, NSW 2116Tel. +61 2 88455222Fax: +61 2 [email protected]

New ZealandWIKA Instruments LimitedUnit 7 / 49 Sainsbury RoadSt Lukes - Auckland 1025Tel. +64 9 8479020Fax: +64 9 [email protected]

WIKA worldwide

9099620 08/2016 EN

Mechanical - KINETROL...Socket weld (solid machined) Thermowell form: Tapered, straight or stepped Welding collar diameter: 1.050, 1.315 or 1.900 inch (26.7, 33.4 or 48.3 mm) Pressure

Documents