Mechanical Assembly

1 www.cncparts.in | Prusa i3 Rework (Even improved) Mechanical assembly

Prusa i3 Rework (even improved) semi Assembled

Mechanical body assembly www.cncparts.in

2 www.cncparts.in | Prusa i3 Rework (Even improved) Mechanical assembly

Remove a M10

nut and a washer

3 www.cncparts.in | Prusa i3 Rework (Even improved) Mechanical assembly

Insert one side frame

through threded rod.

Assure that Ramp 1.4

sided frame is on left

side and Power Supply

frame is on right hand

side.

Insert a washer and M10 nut keeping the frame in

between the washers. Do not tighten right now.

4 www.cncparts.in | Prusa i3 Rework (Even improved) Mechanical assembly

Same way

insert Power

Supply frame at

right side

through hole

5 www.cncparts.in | Prusa i3 Rework (Even improved) Mechanical assembly

Ramp

frame

(left hand

side)

Power Supply

Frame (Right

hand side)

Front

Side

6 www.cncparts.in | Prusa i3 Rework (Even improved) Mechanical assembly

Pass Y assembly

through X-z Assembly.

Fit the frame in

between the two

washers as shown in

the picture below.

7 www.cncparts.in | Prusa i3 Rework (Even improved) Mechanical assembly

8 www.cncparts.in | Prusa i3 Rework (Even improved) Mechanical assembly

9 www.cncparts.in | Prusa i3 Rework (Even improved) Mechanical assembly

10 www.cncparts.in | Prusa i3 Rework (Even improved) Mechanical assembly

11 www.cncparts.in | Prusa i3 Rework (Even improved) Mechanical assembly

12 www.cncparts.in | Prusa i3 Rework (Even improved) Mechanical assembly

13 www.cncparts.in | Prusa i3 Rework (Even improved) Mechanical assembly