Top Banner

of 150

Mech Vi Sdat

Apr 14, 2018

Download

Documents

Manoj Verma
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
  • 7/27/2019 Mech Vi Sdat

    1/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    LM-500-2K11ANIL KUMAR

    11-YMCAU-500YASH PAL

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130685

    ANIL KUMAR

    Reappear (MU-306, MU-308)

    0

    0

    credit : 34

    sgpa : N/A

    cgpa : N/A

    credit : 29

    sgpa : N/A

    cgpa : N/A

    crediT : 32

    sgpa : 0

    cgpa : 0

    crediT : 32 crediT : 32

    sgpa : 0 sgpa : 0

    cgpa : 0 cgpa : 0

    1 Computer Aided Design MU-302 C4

    2 Numerical Control of Machine Tools and Robotics MU-304 D*4

    3 Heat and Mass Transfer MU-306 E4

    4 Machine Design - II MU-308 E4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    B

    C

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    C

    B

    A+

    1

    1

    1

    4 A

    32

    0

    11 Air-Conditioning Equipments MU-324 4 C

  • 7/27/2019 Mech Vi Sdat

    2/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    3/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    LM-501-2K11ANJU RANI

    11-YMCAU-501KASHMIRI LAL

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130686

    ANJU RANI

    -

    0

    0

    credit : 34

    sgpa : N/A

    cgpa : N/A

    credit : 29

    sgpa : N/A

    cgpa : N/A

    crediT : 32

    sgpa : 5.875

    cgpa : 5.875

    crediT : 32 crediT : 32

    sgpa : 6.094 sgpa : 0

    cgpa : 5.984 cgpa : 0

    1 Computer Aided Design MU-302 C4

    2 Numerical Control of Machine Tools and Robotics MU-304 C4

    3 Heat and Mass Transfer MU-306 D*4

    4 Machine Design - II MU-308 C4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    B

    B

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    C

    B

    B

    1

    1

    1

    4 A

    32

    6.562

    11 Air-Conditioning Equipments MU-324 4 C

  • 7/27/2019 Mech Vi Sdat

    4/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    5/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    LM-502-2K11ARUN SAINI

    11-YMCAU-502RAJENDER SAINI

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130687

    ARUN SAINI

    PASS

    128

    7.734

    credit : 34

    sgpa : N/A

    cgpa : N/A

    credit : 29

    sgpa : N/A

    cgpa : N/A

    crediT : 32

    sgpa : 6.688

    cgpa : 6.688

    crediT : 32 crediT : 32

    sgpa : 7.844 sgpa : 8.156

    cgpa : 7.266 cgpa : 7.562

    1 Computer Aided Design MU-302 B4

    2 Numerical Control of Machine Tools and Robotics MU-304 B4

    3 Heat and Mass Transfer MU-306 C4

    4 Machine Design - II MU-308 B4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    A

    A

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    B

    C

    A

    1

    1

    1

    4 A+

    32

    8.25

    11 Air-Conditioning Equipments MU-324 4 A

  • 7/27/2019 Mech Vi Sdat

    6/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    7/150

  • 7/27/2019 Mech Vi Sdat

    8/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    9/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    LM-505-2K11DEEPAK

    11-YMCAU-504VED SINGH

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130689

    DEEPAK

    Reappear (MU-306, MU-308)

    0

    0

    credit : 34

    sgpa : N/A

    cgpa : N/A

    credit : 29

    sgpa : N/A

    cgpa : N/A

    crediT : 32

    sgpa : 0

    cgpa : 0

    crediT : 32 crediT : 32

    sgpa : 0 sgpa : 0

    cgpa : 0 cgpa : 0

    1 Computer Aided Design MU-302 C4

    2 Numerical Control of Machine Tools and Robotics MU-304 C4

    3 Heat and Mass Transfer MU-306 E4

    4 Machine Design - II MU-308 E4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    D

    C

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    B

    C

    B

    1

    1

    1

    4 A

    32

    0

    11 Air-Conditioning Equipments MU-324 4 C

  • 7/27/2019 Mech Vi Sdat

    10/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    11/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    LM-506-2K11DEEPAK DUHAN

    11-YMCAU-505RAJENDER KUMAR

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130690

    DEEPAK DUHAN

    PASS

    128

    8.828

    credit : 34

    sgpa : N/A

    cgpa : N/A

    credit : 29

    sgpa : N/A

    cgpa : N/A

    crediT : 32

    sgpa : 8.594

    cgpa : 8.594

    crediT : 32 crediT : 32

    sgpa : 8.594 sgpa : 9.25

    cgpa : 8.594 cgpa : 8.812

    1 Computer Aided Design MU-302 A+4

    2 Numerical Control of Machine Tools and Robotics MU-304 A4

    3 Heat and Mass Transfer MU-306 B4

    4 Machine Design - II MU-308 A4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    B

    A+

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    A

    A

    B

    1

    1

    1

    4 A

    32

    8.875

    11 Air-Conditioning Equipments MU-324 4 A

  • 7/27/2019 Mech Vi Sdat

    12/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    13/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    LM-507-2K11DEEPAK KUMAR

    11-YMCAU-524BAJINDER LAL

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130691

    DEEPAK KUMAR

    PASS

    128

    6.734

    credit : 34

    sgpa : N/A

    cgpa : N/A

    credit : 29

    sgpa : N/A

    cgpa : N/A

    crediT : 32

    sgpa : 6.094

    cgpa : 6.094

    crediT : 32 crediT : 32

    sgpa : 6 sgpa : 7.719

    cgpa : 6.047 cgpa : 6.604

    1 Computer Aided Design MU-302 B4

    2 Numerical Control of Machine Tools and Robotics MU-304 A4

    3 Heat and Mass Transfer MU-306 D4

    4 Machine Design - II MU-308 D4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    B

    B

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    A

    C

    A

    1

    1

    1

    4 B

    32

    7.125

    11 Air-Conditioning Equipments MU-324 4 B

  • 7/27/2019 Mech Vi Sdat

    14/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    15/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    LM-508-2K11GURMEET

    11-YMCAU-506BALWANT SINGH

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130692

    GURMEET

    PASS

    128

    6.844

    credit : 34

    sgpa : N/A

    cgpa : N/A

    credit : 29

    sgpa : N/A

    cgpa : N/A

    crediT : 32

    sgpa : 6.688

    cgpa : 6.688

    crediT : 32 crediT : 32

    sgpa : 6.875 sgpa : 7.031

    cgpa : 6.781 cgpa : 6.865

    1 Computer Aided Design MU-302 C4

    2 Numerical Control of Machine Tools and Robotics MU-304 C4

    3 Heat and Mass Transfer MU-306 C4

    4 Machine Design - II MU-308 D4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    A

    B

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    B

    D

    A

    1

    1

    1

    4 B

    32

    6.781

    11 Air-Conditioning Equipments MU-324 4 B

  • 7/27/2019 Mech Vi Sdat

    16/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    17/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    LM-509-2K11KESHAV VERMA

    11-YMCAU-507BUTA SINGH

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130693

    KESHAV VERMA

    PASS

    128

    6.953

    credit : 34

    sgpa : N/A

    cgpa : N/A

    credit : 29

    sgpa : N/A

    cgpa : N/A

    crediT : 32

    sgpa : 5.406

    cgpa : 5.406

    crediT : 32 crediT : 32

    sgpa : 6.938 sgpa : 7.812

    cgpa : 6.172 cgpa : 6.719

    1 Computer Aided Design MU-302 A4

    2 Numerical Control of Machine Tools and Robotics MU-304 C4

    3 Heat and Mass Transfer MU-306 C4

    4 Machine Design - II MU-308 C4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    B

    B

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    A

    B

    B

    1

    1

    1

    4 A

    32

    7.656

    11 Air-Conditioning Equipments MU-324 4 A

  • 7/27/2019 Mech Vi Sdat

    18/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    19/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    LM-510-2K11MONU

    11-YMCAU-508MUNNI RAM

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130694

    MONU

    Reappear (MU-306)

    0

    0

    credit : 34

    sgpa : N/A

    cgpa : N/A

    credit : 29

    sgpa : N/A

    cgpa : N/A

    crediT : 32

    sgpa : 0

    cgpa : 0

    crediT : 32 crediT : 32

    sgpa : 5.781 sgpa : 6.938

    cgpa : 0 cgpa : 0

    1 Computer Aided Design MU-302 A4

    2 Numerical Control of Machine Tools and Robotics MU-304 C4

    3 Heat and Mass Transfer MU-306 E4

    4 Machine Design - II MU-308 C4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    B

    B

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    A

    A

    B

    1

    1

    1

    4 A

    32

    0

    11 Air-Conditioning Equipments MU-324 4 B

  • 7/27/2019 Mech Vi Sdat

    20/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    21/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    LM-511-2K11NAVNEET MUWAL

    11-YMCAU-509BALBIR SINGH

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130695

    NAVNEET MUWAL

    PASS

    128

    6.758

    credit : 34

    sgpa : N/A

    cgpa : N/A

    credit : 29

    sgpa : N/A

    cgpa : N/A

    crediT : 32

    sgpa : 6.438

    cgpa : 6.438

    crediT : 32 crediT : 32

    sgpa : 5.969 sgpa : 7.75

    cgpa : 6.203 cgpa : 6.719

    1 Computer Aided Design MU-302 B4

    2 Numerical Control of Machine Tools and Robotics MU-304 C4

    3 Heat and Mass Transfer MU-306 D4

    4 Machine Design - II MU-308 D4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    B

    C

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    A

    B

    A

    1

    1

    1

    4 B

    32

    6.875

    11 Air-Conditioning Equipments MU-324 4 A

  • 7/27/2019 Mech Vi Sdat

    22/150

  • 7/27/2019 Mech Vi Sdat

    23/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    LM-512-2K11NEELAM

    11-YMCAU-523PREM SINGH

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130696

    NEELAM

    PASS

    128

    7.328

    credit : 34

    sgpa : N/A

    cgpa : N/A

    credit : 29

    sgpa : N/A

    cgpa : N/A

    crediT : 32

    sgpa : 6.906

    cgpa : 6.906

    crediT : 32 crediT : 32

    sgpa : 7.344 sgpa : 7.844

    cgpa : 7.125 cgpa : 7.365

    1 Computer Aided Design MU-302 B4

    2 Numerical Control of Machine Tools and Robotics MU-304 B4

    3 Heat and Mass Transfer MU-306 D4

    4 Machine Design - II MU-308 D4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    A

    A

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    A+

    C

    C

    1

    1

    1

    4 A

    32

    7.219

    11 Air-Conditioning Equipments MU-324 4 B

  • 7/27/2019 Mech Vi Sdat

    24/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    25/150

  • 7/27/2019 Mech Vi Sdat

    26/150

  • 7/27/2019 Mech Vi Sdat

    27/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    LM-514-2K11RAKESH SHARMA

    11-YMCAU-511BALWAN SINGH

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130698

    RAKESH SHARMA

    Reappear (MU-306)

    0

    0

    credit : 34

    sgpa : N/A

    cgpa : N/A

    credit : 29

    sgpa : N/A

    cgpa : N/A

    crediT : 32

    sgpa : 0

    cgpa : 0

    crediT : 32 crediT : 32

    sgpa : 0 sgpa : 0

    cgpa : 0 cgpa : 0

    1 Computer Aided Design MU-302 C4

    2 Numerical Control of Machine Tools and Robotics MU-304 C4

    3 Heat and Mass Transfer MU-306 E4

    4 Machine Design - II MU-308 D*4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    B

    B

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    B

    C

    C

    1

    1

    1

    4 A

    32

    0

    11 Air-Conditioning Equipments MU-324 4 C

  • 7/27/2019 Mech Vi Sdat

    28/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    29/150

  • 7/27/2019 Mech Vi Sdat

    30/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    31/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    LM-516-2K11SANDEEP KAUR

    11-YMCAU-513RAMESH SINGH

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130700

    SANDEEP KAUR

    PASS

    128

    6.672

    credit : 34

    sgpa : N/A

    cgpa : N/A

    credit : 29

    sgpa : N/A

    cgpa : N/A

    crediT : 32

    sgpa : 6.312

    cgpa : 6.312

    crediT : 32 crediT : 32

    sgpa : 6.312 sgpa : 7.406

    cgpa : 6.312 cgpa : 6.677

    1 Computer Aided Design MU-302 C4

    2 Numerical Control of Machine Tools and Robotics MU-304 C4

    3 Heat and Mass Transfer MU-306 D4

    4 Machine Design - II MU-308 C4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    B

    B

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    A

    B

    B

    1

    1

    1

    4 A

    32

    6.656

    11 Air-Conditioning Equipments MU-324 4 C

  • 7/27/2019 Mech Vi Sdat

    32/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    33/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    LM-517-2K11SHANKI

    11-YMCAU-514SURENDER KUMAR

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130701

    SHANKI

    Reappear (MU-306)

    0

    0

    credit : 34

    sgpa : N/A

    cgpa : N/A

    credit : 29

    sgpa : N/A

    cgpa : N/A

    crediT : 32

    sgpa : 6.125

    cgpa : 6.125

    crediT : 32 crediT : 32

    sgpa : 5.625 sgpa : 7.281

    cgpa : 5.875 cgpa : 6.344

    1 Computer Aided Design MU-302 C4

    2 Numerical Control of Machine Tools and Robotics MU-304 C4

    3 Heat and Mass Transfer MU-306 E4

    4 Machine Design - II MU-308 D4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    B

    B

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    B

    B

    C

    1

    1

    1

    4 A

    32

    0

    11 Air-Conditioning Equipments MU-324 4 C

  • 7/27/2019 Mech Vi Sdat

    34/150

  • 7/27/2019 Mech Vi Sdat

    35/150

  • 7/27/2019 Mech Vi Sdat

    36/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    37/150

  • 7/27/2019 Mech Vi Sdat

    38/150

  • 7/27/2019 Mech Vi Sdat

    39/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    LM-520-2K11SUNITA

    11-YMCAU-517RAJ SINGH

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130704

    SUNITA

    Reappear (MU-306)

    0

    0

    credit : 34

    sgpa : N/A

    cgpa : N/A

    credit : 29

    sgpa : N/A

    cgpa : N/A

    crediT : 32

    sgpa : 5.438

    cgpa : 5.438

    crediT : 32 crediT : 32

    sgpa : 6.188 sgpa : 6.844

    cgpa : 5.812 cgpa : 6.156

    1 Computer Aided Design MU-302 C4

    2 Numerical Control of Machine Tools and Robotics MU-304 C4

    3 Heat and Mass Transfer MU-306 E4

    4 Machine Design - II MU-308 D4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    B

    B

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    A

    C

    C

    1

    1

    1

    4 A

    32

    0

    11 Air-Conditioning Equipments MU-324 4 C

  • 7/27/2019 Mech Vi Sdat

    40/150

  • 7/27/2019 Mech Vi Sdat

    41/150

  • 7/27/2019 Mech Vi Sdat

    42/150

  • 7/27/2019 Mech Vi Sdat

    43/150

  • 7/27/2019 Mech Vi Sdat

    44/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    45/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    LM-523-2K11VINIT KUMAR

    11-YMCAU-520JAI PARKASH

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130707

    VINIT KUMAR

    Reappear (MU-306, MU-308)

    0

    0

    credit : 34

    sgpa : N/A

    cgpa : N/A

    credit : 29

    sgpa : N/A

    cgpa : N/A

    crediT : 32

    sgpa : 5.5

    cgpa : 5.5

    crediT : 32 crediT : 32

    sgpa : 0 sgpa : 6.906

    cgpa : 0 cgpa : 0

    1 Computer Aided Design MU-302 C4

    2 Numerical Control of Machine Tools and Robotics MU-304 C4

    3 Heat and Mass Transfer MU-306 E4

    4 Machine Design - II MU-308 E4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    C

    B

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    B

    C

    C

    1

    1

    1

    4 B

    32

    0

    11 Air-Conditioning Equipments MU-324 4 C

  • 7/27/2019 Mech Vi Sdat

    46/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    47/150

  • 7/27/2019 Mech Vi Sdat

    48/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    49/150

  • 7/27/2019 Mech Vi Sdat

    50/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    51/150

  • 7/27/2019 Mech Vi Sdat

    52/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    53/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    M-362-2K10AASHISH ROHILA

    10-YMCAU-002RAJ KUMAR

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130711

    AASHISH ROHILA

    -

    0

    0

    credit : 34

    sgpa : 0

    cgpa : 0

    credit : 29

    sgpa : 5.448

    cgpa : 0

    crediT : 32

    sgpa : 6.25

    cgpa : 0

    crediT : 32 crediT : 32

    sgpa : 5.594 sgpa : 7.719

    cgpa : 0 cgpa : 0

    1 Computer Aided Design MU-302 B4

    2 Numerical Control of Machine Tools and Robotics MU-304 B4

    3 Heat and Mass Transfer MU-306 D4

    4 Machine Design - II MU-308 D4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    A

    C

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    B

    A

    C

    1

    1

    1

    4 A+

    32

    7.281

    11 Air-Conditioning Equipments MU-324 4 B

  • 7/27/2019 Mech Vi Sdat

    54/150

  • 7/27/2019 Mech Vi Sdat

    55/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    M-363-2K10ABHIMANYU MALIK

    10-YMCAU-003RANBIR SINGH MALIK

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130712

    ABHIMANYU MALIK

    PASS

    191

    8.529

    credit : 34

    sgpa : 8.765

    cgpa : 8.765

    credit : 29

    sgpa : 8.793

    cgpa : 8.778

    crediT : 32

    sgpa : 8.531

    cgpa : 8.695

    crediT : 32 crediT : 32

    sgpa : 8.312 sgpa : 8.438

    cgpa : 8.598 cgpa : 8.566

    1 Computer Aided Design MU-302 A4

    2 Numerical Control of Machine Tools and Robotics MU-304 A4

    3 Heat and Mass Transfer MU-306 B4

    4 Machine Design - II MU-308 C4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    B

    A

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    B

    B

    A+

    1

    1

    1

    4 A

    32

    8.344

    11 Air-Conditioning Equipments MU-324 4 A

  • 7/27/2019 Mech Vi Sdat

    56/150

  • 7/27/2019 Mech Vi Sdat

    57/150

  • 7/27/2019 Mech Vi Sdat

    58/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    59/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    M-365-2K10ASHISH KUMAR

    10-YMCAU-005SHRI KRISHAN

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130714

    ASHISH KUMAR

    PASS

    191

    7.241

    credit : 34

    sgpa : 6

    cgpa : 6

    credit : 29

    sgpa : 6.276

    cgpa : 6.127

    crediT : 32

    sgpa : 6.812

    cgpa : 6.358

    crediT : 32 crediT : 32

    sgpa : 7.531 sgpa : 8.344

    cgpa : 6.654 cgpa : 6.994

    1 Computer Aided Design MU-302 B4

    2 Numerical Control of Machine Tools and Robotics MU-304 B4

    3 Heat and Mass Transfer MU-306 B4

    4 Machine Design - II MU-308 B4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    A

    A+

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    B

    B

    A

    1

    1

    1

    4 A

    32

    8.469

    11 Air-Conditioning Equipments MU-324 4 A

  • 7/27/2019 Mech Vi Sdat

    60/150

  • 7/27/2019 Mech Vi Sdat

    61/150

  • 7/27/2019 Mech Vi Sdat

    62/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    63/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    M-367-2K10AJAY KUMAR

    10-YMCAU-007ROHTASH SINGH

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130716

    AJAY KUMAR

    Reappear (MU-308)

    0

    0

    credit : 34

    sgpa : 4.824

    cgpa : 4.824

    credit : 29

    sgpa : 5.379

    cgpa : 5.079

    crediT : 32

    sgpa : 5.375

    cgpa : 5.179

    crediT : 32 crediT : 32

    sgpa : 5.938 sgpa : 0

    cgpa : 5.37 cgpa : 0

    1 Computer Aided Design MU-302 C4

    2 Numerical Control of Machine Tools and Robotics MU-304 D*4

    3 Heat and Mass Transfer MU-306 D4

    4 Machine Design - II MU-308 E4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    C

    C

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    B

    B

    C

    1

    1

    1

    4 B

    32

    0

    11 Air-Conditioning Equipments MU-324 4 C

  • 7/27/2019 Mech Vi Sdat

    64/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    65/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    M-368-2K10AMIT

    10-YMCAU-008RAJPAL SINGH

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130717

    AMIT

    -

    0

    0

    credit : 34

    sgpa : 5.941

    cgpa : 5.941

    credit : 29

    sgpa : 5.897

    cgpa : 5.921

    crediT : 32

    sgpa : 6.062

    cgpa : 5.968

    crediT : 32 crediT : 32

    sgpa : 6.438 sgpa : 0

    cgpa : 6.087 cgpa : 0

    1 Computer Aided Design MU-302 C4

    2 Numerical Control of Machine Tools and Robotics MU-304 C4

    3 Heat and Mass Transfer MU-306 C4

    4 Machine Design - II MU-308 C4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    B

    A

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    C

    A

    B

    1

    1

    1

    4 A

    32

    7.125

    11 Air-Conditioning Equipments MU-324 4 B

  • 7/27/2019 Mech Vi Sdat

    66/150

  • 7/27/2019 Mech Vi Sdat

    67/150

  • 7/27/2019 Mech Vi Sdat

    68/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    69/150

  • 7/27/2019 Mech Vi Sdat

    70/150

  • 7/27/2019 Mech Vi Sdat

    71/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    M-371-2K10ANISH MAHESHWARI

    10-YMCAU-011SANJAY MAHESHWARI

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130720

    ANISH MAHESHWARI

    PASS

    191

    7.801

    credit : 34

    sgpa : 7.971

    cgpa : 7.971

    credit : 29

    sgpa : 8.379

    cgpa : 8.159

    crediT : 32

    sgpa : 7.656

    cgpa : 7.989

    crediT : 32 crediT : 32

    sgpa : 7.594 sgpa : 7.781

    cgpa : 7.89 cgpa : 7.868

    1 Computer Aided Design MU-302 C4

    2 Numerical Control of Machine Tools and Robotics MU-304 B4

    3 Heat and Mass Transfer MU-306 C4

    4 Machine Design - II MU-308 C4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    B

    A+

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    B

    B

    A

    1

    1

    1

    4 A

    32

    7.469

    11 Air-Conditioning Equipments MU-324 4 B

  • 7/27/2019 Mech Vi Sdat

    72/150

  • 7/27/2019 Mech Vi Sdat

    73/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    M-372-2K10ANKIT SHARMA

    10-YMCAU-012HARSHARAN PAL SHARMA

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130721

    ANKIT SHARMA

    PASS

    191

    8.44

    credit : 34

    sgpa : 9.029

    cgpa : 9.029

    credit : 29

    sgpa : 8.828

    cgpa : 8.937

    crediT : 32

    sgpa : 8.062

    cgpa : 8.642

    crediT : 32 crediT : 32

    sgpa : 8.25 sgpa : 8.25

    cgpa : 8.543 cgpa : 8.484

    1 Computer Aided Design MU-302 B4

    2 Numerical Control of Machine Tools and Robotics MU-304 B4

    3 Heat and Mass Transfer MU-306 A4

    4 Machine Design - II MU-308 B4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    B

    A+

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    C

    A

    C

    1

    1

    1

    4 B

    32

    8.219

    11 Air-Conditioning Equipments MU-324 4 A

  • 7/27/2019 Mech Vi Sdat

    74/150

  • 7/27/2019 Mech Vi Sdat

    75/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    M-373-2K10ANMOL SIKKA

    10-YMCAU-013UMANG SIKKA

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130722

    ANMOL SIKKA

    PASS

    191

    8.026

    credit : 34

    sgpa : 7.471

    cgpa : 7.471

    credit : 29

    sgpa : 8.103

    cgpa : 7.762

    crediT : 32

    sgpa : 7.875

    cgpa : 7.8

    crediT : 32 crediT : 32

    sgpa : 7.844 sgpa : 8.25

    cgpa : 7.811 cgpa : 7.899

    1 Computer Aided Design MU-302 A4

    2 Numerical Control of Machine Tools and Robotics MU-304 A4

    3 Heat and Mass Transfer MU-306 B4

    4 Machine Design - II MU-308 B4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    B

    A+

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    A

    A

    A

    1

    1

    1

    4 A

    32

    8.656

    11 Air-Conditioning Equipments MU-324 4 A

  • 7/27/2019 Mech Vi Sdat

    76/150

  • 7/27/2019 Mech Vi Sdat

    77/150

  • 7/27/2019 Mech Vi Sdat

    78/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    79/150

  • 7/27/2019 Mech Vi Sdat

    80/150

  • 7/27/2019 Mech Vi Sdat

    81/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    M-376-2K10ANURAG SHARMA

    10-YMCAU-016SURESH KUMAR SHARMA

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130725

    ANURAG SHARMA

    Reappear (MU-306, MU-308)

    0

    0

    credit : 34

    sgpa : 6

    cgpa : 6

    credit : 29

    sgpa : 6.862

    cgpa : 6.397

    crediT : 32

    sgpa : 6.844

    cgpa : 6.547

    crediT : 32 crediT : 32

    sgpa : 6.469 sgpa : 6.438

    cgpa : 6.528 cgpa : 6.509

    1 Computer Aided Design MU-302 B4

    2 Numerical Control of Machine Tools and Robotics MU-304 D*4

    3 Heat and Mass Transfer MU-306 E4

    4 Machine Design - II MU-308 E4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    B

    B

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    B

    C

    B

    1

    1

    1

    4 A

    32

    0

    11 Air-Conditioning Equipments MU-324 4 B

  • 7/27/2019 Mech Vi Sdat

    82/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    83/150

  • 7/27/2019 Mech Vi Sdat

    84/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    85/150

  • 7/27/2019 Mech Vi Sdat

    86/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    87/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    M-379-2K10ATUL

    10-YMCAU-019NAFE SINGH

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130728

    ATUL

    Reappear (MU-306)

    0

    0

    credit : 34

    sgpa : 0

    cgpa : 0

    credit : 29

    sgpa : 6.586

    cgpa : 0

    crediT : 32

    sgpa : 6.25

    cgpa : 0

    crediT : 32 crediT : 32

    sgpa : 6.094 sgpa : 6.812

    cgpa : 0 cgpa : 0

    1 Computer Aided Design MU-302 B4

    2 Numerical Control of Machine Tools and Robotics MU-304 C4

    3 Heat and Mass Transfer MU-306 E4

    4 Machine Design - II MU-308 D*4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    B

    C

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    B

    B

    B

    1

    1

    1

    4 A

    32

    0

    11 Air-Conditioning Equipments MU-324 4 B

  • 7/27/2019 Mech Vi Sdat

    88/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    89/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    M-380-2K10BALRAM

    10-YMCAU-020MANGAT RAM

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130729

    BALRAM

    Reappear (MU-302, MU-304, MU-306, MU-308, MU-324)

    0

    0

    credit : 34

    sgpa : 0

    cgpa : 0

    credit : 29

    sgpa : 0

    cgpa : 0

    crediT : 32

    sgpa : 0

    cgpa : 0

    crediT : 32 crediT : 32

    sgpa : 0 sgpa : 0

    cgpa : 0 cgpa : 0

    1 Computer Aided Design MU-302 E4

    2 Numerical Control of Machine Tools and Robotics MU-304 E4

    3 Heat and Mass Transfer MU-306 E4

    4 Machine Design - II MU-308 E4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    C

    C

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    C

    C

    C

    1

    1

    1

    4 A

    32

    0

    11 Air-Conditioning Equipments MU-324 4 E

  • 7/27/2019 Mech Vi Sdat

    90/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    91/150

  • 7/27/2019 Mech Vi Sdat

    92/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    93/150

  • 7/27/2019 Mech Vi Sdat

    94/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    95/150

  • 7/27/2019 Mech Vi Sdat

    96/150

  • 7/27/2019 Mech Vi Sdat

    97/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]

    RESULT CUM GRADE CARD

    BACHELOR OF TECHNOLOGY

    (Under Credit Based System)

    Name : University Roll No. :

    Fathers Name : University Registration No. :

    YMCAUST, Faridabad

    Result :

    July 25, 2013Date :

    Total credits earned upto sixth semester :

    Cumulative Grade Point Average (CGPA) :

    SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V

    S. No. CODE NO. CREDITS GRADESUBJECT

    Total Credits

    SGPA

    Mechanical Engineering

    M-384-2K10CHIRAG KHURANA

    10-YMCAU-024MADAN MOHAN KHURANA

    Sixth Semester Examination May, 2013

    Sr. No. YMCA 05130733

    CHIRAG KHURANA

    Reappear (MU-306)

    0

    0

    credit : 34

    sgpa : 0

    cgpa : 0

    credit : 29

    sgpa : 6.276

    cgpa : 0

    crediT : 32

    sgpa : 0

    cgpa : 0

    crediT : 32 crediT : 32

    sgpa : 0 sgpa : 0

    cgpa : 0 cgpa : 0

    1 Computer Aided Design MU-302 D4

    2 Numerical Control of Machine Tools and Robotics MU-304 D4

    3 Heat and Mass Transfer MU-306 E4

    4 Machine Design - II MU-308 D*4

    5

    6

    Industrial Engineering

    Computer Aided Design Lab

    MU-310

    MU-312

    B

    C

    4

    1

    7

    8

    9

    10

    Numerical Control of Machine Tools and Robotics Lab

    Heat and Mass Transfer Lab

    Seminar

    Workshop - VI

    MU-314

    MU-316

    MU-318

    MU-320

    C

    C

    C

    1

    1

    1

    4 A

    32

    0

    11 Air-Conditioning Equipments MU-324 4 C

  • 7/27/2019 Mech Vi Sdat

    98/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    99/150

  • 7/27/2019 Mech Vi Sdat

    100/150

    Each Letter Grade awarded to the student indicates the level of performance of student in a course and it

    has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given

    below:

    Letter Grade Performance Grade Point

    A+ Outstanding 10

    A Excellent 9

    B Very Good 8

    C Below Average 6

    D Marginal 4

    E Very Poor 0

    A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).

    Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as

    follows:

    CGPA = CiGi/Ci

    Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter

    Grade obtained by the student to the ith course.

    NOTE:

    The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00

    Issued on.

    Prepared By ...........

    Checked By ...........

  • 7/27/2019 Mech Vi Sdat

    101/150

    YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD

    [Established by Har