Mazak FabriGear 300 Six-Axis Tube Laser www.wagneroem.com The Mazak FabriGear 300 Six- Axis Tube Laser can cut at any desired angle for weld prep, plus achieve the highest accuracy for easy fit-up of assemblies – all in a single program cycle. The FabriGear's program-controlled loading, workholding, and unload- ing make it an efficient fabrication cell requiring a minimum of labor input for small to large volume part production. FG-CAD/CAMis a PC-based system for tube and pipe processing that processes the most complex pipe shapes in a fraction of the time traditionally used. 3D modeling tighter fitting, more accurate pipe joints. CApACiTieS: • Up to 11.8" round pipe • Up to 8" square tube • Up to 8" rectangular (any one side) • Up to 26' long • Material thickness of 3 ⁄8" in aluminum, 1 ⁄2" in stainless steel and 7 ⁄8" in steel • Complex contour cuts FeATureS: • Automatically loads • Feeds • Laser cuts • Unloads parts • Uses 2D .dxf or 3D .igs format files maximizing material usage and reduces scrap For more information, call (888) 243-6914 fax (414) 355-3576 or email [email protected] [email protected] www.shopwagner.com www.wagnercompanies.com Toll Free (888) 243-6914 Phone (414) 214-0444 Fax (414) 214-0450 The Wagner Companies P. O. Box 423 Butler, WI 53007-0423 © 2010 R & B Wagner, Inc. All Rights Reserved. #MKT HB 0085 R2 ADDiTiONAL SerViCeS: pOLiSHiNG • STAMpiNG • pipe AND TuBe BeNDiNG • WeLDiNG • WATer JeT CuTTiNG