Max Jac ® Electric Linear Actuators Heavy Duty IP69K Actuator for the Toughest Conditions www.thomsonlinear.com
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Max Jac® Electric Linear ActuatorsHeavy Duty IP69K Actuator for the Toughest Conditions
www.thomsonlinear.com
2 www.thomsonlinear.com
Introduction
The Max Jac is not only tough
but also a high performer that delivers high speed, efficiency,
and accuracy in a compact envelope. Like all Thomson
linear actuators, the Max Jac can easily be customized to match
your application’s requirements.
The new Thomson Max Jac® linear actuator is the result of decades of extensive success in making linear actuators for the mobile-off-highway market. The Max Jac is built to work virtually maintenance-free in environments where it encounters fertilizers, mud, sand, high pressure water jets, slush, salt water, snow, heat or heavy vibrations.
3
Max Jac® Heavy Duty Linear Actuator
www.thomsonlinear.com
Max Jac Main Features • Long life • Reliability • High speed • High efficiency • Small envelope • Minimal backlash
Tough, Tougher, Max Jac® ... State of the art technology and the best materials available make the Max Jac strong and reliable within a lightweight package. The Max Jac has undegone rigorous testing throughout the entire development process to ensure that it will deliver trouble free operation, long life, and outstanding performance in demanding environments.
Worm or Ball ScrewHardcoat Anodized Aluminium Cover Tube Stainless Steel Extension Tube
Stainless Steel AdapterO-ring Sealed Housing IP69K Protection ClassNon Contact Position Feedback Options
• Vibration resistant • Duty cycle up to 100% • Short total length versus stroke • High degree corrosion protection • High accuracy position feedback options
4 www.thomsonlinear.com
... and Just Wash it Off! Unlike most actuators the Max Jac can be washed directly with high pressure water jets and even be submerged for short periods when not operating.This eliminates the need for bellows or other protective devices. The Max Jac simplifies cleaning and installation, reduces the size of the installation, and lowers the total cost.
Let the Max Jac Work in Dust, Dirt, and Mud... The Max Jac electric linear actuator is designed to endure the harshest environments. It is rated for IP66/IP69K and has been tested for 500 hours of salt spray. It withstands dirt, dust and water, and also aggressive substances such as fertilizers, acid, oil, grease, and cleaning agents.
... in Arctic to Desert Temperatures ... The operating temperature range of the Max Jac stretches from -40 to +85 °C which is the greatest range of any actuator on the market. It can operate in almost any place on the Earth whether it be in the arctic region or in a desert.
Features and Benefits The Max Jac® can be used in many types of applications, but it excels when used under the harshest conditions. Every aspect of the actuator has been designed to ensure longevity, reliability, and performance.
5
Max Jac® Heavy Duty Linear Actuator
www.thomsonlinear.com
Features, Benefits and Applications • Long life • High duty cycle • Able to withstand harsh environments.
Typical applications where the Max Jac can replace pneumatic cylinders are found in the food, packaging and handling industries and in all types of vehicles, construction and farming equipment.
Applications The Max Jac® is the ideal choice whenever the environment is tough and wherever long life and trouble free operation is essential. The Max Jac is specifically designed to be used in applications that need: • High duty cycles • Accuracy • Ability to withstand water • Ability to withstand aggressive chemicals.
The Max Jac can be used to control sand/salt/fertilizer spreaders, hatches, doors and throttles and is ideal in vehicles used for: • Farming equipment • Road maintenance • Construction work • Military
The Max Jac linear actuator is also an excellent choice for yacht, ship and oil platform applications due it’s ability to withstand water, salt and chemicals as well as its great operating temperature range. Other suitable application areas includes: • Food industry • Trains and trams • Mining equipment
Best In Class The Max Jac® is the best overall choice among actuators when designing for demanding applications. It offers the following advantages. • Shortest overall length versus stroke • Fastest among its peers • Resistant against vibration and impacts • Largest operating temperature range • Possibility to work at 100% duty cycle • Long and completely maintenance free life.
Non Contact Position Feedback Options The Max Jac can be equipped with two kinds of position feedback options that fit in to the standard housing without adding to the outer dimensions: • analog position output signal • digital encoder output.
Both use non contact position sensors which ensure that the life of the position feedback device is at least as long as the life of the actuator itself. It also means that the signal does not vary over time due to wear and the system therefore never requires any re-calibration.
Worm or Ball Screw Models Max Jac is available with either worm or ball screws, each with unique advantages. The worm screw version is self-locking and will not back drive on power-off. The ball screw version will go faster, take higher loads and operate at higher duty cycles.
Suitable for Pneumatic Conversion Compared to pneumatic cylinders, electric linear actuators: • Easier to install • Offer more control options • Reduce energy costs.
The Max Jac has many properties that make it suitable for pneumatic conversion. It is: • Fast • Small
6 www.thomsonlinear.com
Specifications
General Specifications
Parameter Max Jac
Screw type worm or ball
Internally restrained no
Manual override no
Dynamic braking no
Self locking worm screw models ball screw models
yesno
End of stroke protection no
Mid stroke protection no
Motor protection no
Motor connection flying leads or cable with connector
Motor connector AMP Superseal Series 1,5
Certificates CE
Options Encoder position feedback
Standard Features and Benefits
Performance Specifications
Parameter Max Jac
Maximum load, dynamic / static MX • • W (worm screw) MX • • B (ball screw)
[N] 500 / 2000 800 / 100 - 350 (1)
Speed, at no load / at maximum load MX • • W (worm screw) MX • • B (ball screw)
[mm/s]33 / 1960 / 30
Available input voltages [VDC] 12, 24
Standard stroke lengths [mm] 50,100,150200, 250 (2), 300 (2)
Operating temperature limits [°C] -40 to +85
Full load duty cycle @ 25 °C [%] 25
End play, maximum [mm] 0,3
Restraining torque [Nm] 2
Lead cross section [mm2] 1
Standard cable lengths [mm] 300, 1600
Protection class IP66/IP69K
Salt spray resistance [h] 500
Life [cycles] 500000 (3)
Analog position feedback signal [VDC] 0,5 - 4,5
Encoder position feedback option Supply voltage Pulses per mm, worm / ball screw Channels
[VDC] 59,86 / 5,84
A, B
• Designed for industrial applications• Rugged aluminum housing with IP69K• High efficiency• Long life• Hard coat anodizing for high corrosion resistance• Virtually maintenance free• Worm or ball screw models• Non contact analog position feedback signal
Duty Cycle vs. Load
(1) The static force (i.e. the backdriving force) for a ball screw unit varies and is dependent on the number of cycles it has been running and at which loads.(2) Strokes possible for ball screw models only.(3) For ball screw actuator with 100 mm stroke, average load of 500 N and changing load direction.
Dynamic load [N] (lbs)
ED @ 25 °C [%]
00
40
80
20
60
100
600
(155.0)
700
(167.5)
800
(180.0)
100
(22.5)
200
(45.0)
300
(67.5)
400
(90.0)
500
(112.5)
ball screw
worm screw
7
Max Jac® Heavy Duty Linear Actuator
www.thomsonlinear.com
Dimensions, Performance and Ordering Key
Stroke (S) [mm (inch)] 50 (1.97) 100 (3.94) 150 (5.91) 200 (7.87) 250 (9.84) * 300 (11.81) *
Retracted length (A) [mm (inch)] 206 (8.11) 256 (10.08) 306 (12.05) 356 (14.02) 406 (15.98) 456 (17.95)
Weight [kg] 1,5 1,7 1,9 2,1 2,2 2,4
Dimensions Projection
METRIC
Performance Diagrams
Worm Screw Models (MX • • W) Ball Screw Models (MX • • B)
00
20
40
60
10
30
50
600
(155.0)
700
(167.5)
800
(180.0)
2,7
5,35
8,0
1,35
4.0
6,7
0
0 100
(22.5)
0
20
40
10
200
(45.0)
300
(67.5)
400
(90.0)
500
(112.5)
0
30
15
35
5
25
4
8
2
6
3
7
1
5
100
(22.5)
200
(45.0)
300
(67.5)
400
(90.0)
500
(112.5)
speedspeed
Dynamic load [N (lbs)] Dynamic load [N (lbs)]
Speed [mm/s] Speed [mm/s]Current [A] Current [A]
current 12 VDC
current 12 VDC
current 24 VDCcurrent 24 VDC
Ordering Key
Position 1 2 3 4 5
Example MX12- B8 M15 P 1
1. Actuator type and supply voltageMX12- = Max Jac 12 VDCMX24- = Max Jac 24 VDC
2. Max. dynamic load, screw type and max. speedB8 = 800 N, ball screw, 55 mm/sW1 = 500 N, worm screw, 35 mm/s
3. Stroke (S)M05 = 50 mmM10 = 100 mmM15 = 150 mmM20 = 200 mmM25 = 250 mm*M30 = 300 mm*
4. Position feedback optionP = analog signal (standard)E = encoder signal
5. Cable and connectors0 = 300 mm long flying leads1 = 300 mm long cable and connector **2 = 1600 mm long cable and connector **** AMP Super seal series 1,5 connector
* Strokes possible for ball screw models only.
* Strokes possible for ball screw models only.
Max_Jac_BRUK-0003-02B | 20150423TJSpecifications are subject to change without notice. It is the responsibility of the product user to determine the suitability of this product for a specific application. All trademarks property of their respective owners. © Thomson Industries, Inc. 2015
www.thomsonlinear.com
EUROPEUnited KingdomThomsonPhone: +44 (0) 1271 334 500Fax: +44 (0) 1271 334 501E-mail: [email protected]
GermanyThomsonNürtinger Straße 7072649 WolfschlugenPhone: +49 (0) 7022 504 0Fax: +49 (0) 7022 504 405E-mail: [email protected]
FranceThomsonPhone: +33 (0) 243 50 03 30Fax: +33 (0) 243 50 03 39E-mail: [email protected]
ItalyThomsonLargo Brughetti20030 Bovisio MasciagoPhone: +39 0362 594260Fax: +39 0362 594263E-mail: [email protected]
SpainThomsonRbla Badal, 29-31 7th, 1st08014 BarcelonaPhone: +34 (0) 9329 80278Fax: + 34 (0) 9329 80278E-mail: [email protected]
SwedenThomsonEstridsväg 1029109 KristianstadPhone: +46 (0) 44 24 67 00Fax: +46 (0) 44 24 40 85E-mail: [email protected]
SOUTH AMERICA Thomson Sao Paulo, SP Brazil Phone: +55 11 3879-6600 Fax: +55 11 3879 6656 E-mail: [email protected]
USA, CANADA and MEXICOThomson203A West Rock RoadRadford, VA 24141, USAPhone: 1-540-633-3549Fax: 1-540-633-0294E-mail: [email protected]: literature.thomsonlinear.com
ASIA
Asia PacificThomson750, Oasis, Chai Chee Road,#03-20, Technopark @ Chai Chee,Singapore 469000E-mail: [email protected]
ChinaThomsonRm 2205, Scitech Tower22 Jianguomen Wai StreetBeijing 100004Phone: +86 400 6661 802Fax: +86 10 6515 0263E-mail: [email protected]
IndiaThomson1001, Sigma Building Hiranandani Business Park Powai , Mumbai – 400076 Phone: +91 22 422 70 300 Fax: +91 22 422 70 338E-mail: [email protected]
JapanThomsonMinami-Kaneden 2-12-23, SuitaOsaka 564-0044 JapanPhone: +81-6-6386-8001Fax: +81-6-6386-5022E-mail: [email protected]
KoreaThomsonF12 Ilsong Bldg, 157-37Samsung-dong, Kangnam-gu,Seoul, Korea (135-090)Phone: +82 2 6917 5049Fax: +82 2 6917 5007E-mail: [email protected]
Related Documents
