MAVERICK ACCESSORIES

2 0 2 2

A C C E S S O R I E S

accessories.ford.comComputer-generated vehicle images shown throughout with optional equipment and available Ford accessories. Recreational equipment not included.

https://accessories.ford.com/


accessories.ford.com

T H E F O R D A C C E S S O R I E S A D VA N TA G EThe all-new 2022 Maverick is made to defy expectations. And we understand that accessories are a key component of the Maverick Ownership Experience. Every Maverick was designed with customization in mind as we know that each one will be used for a different adventure.

• Quality products approved by Ford and designed specifically for your application• Engineered to integrate with on-board vehicle safety systems such as airbag deployment sensors• Include the costs of Ford accessories in Ford Credit financing or Red Carpet Lease• Covered by the 3-year/36,000-mile New Vehicle Limited Warranty when installed at time of

purchase (see dealer for limited warranty details)• When you require warranty service on a Ford Accessory,

you can go to any Ford Dealership

Find out more at accessories.ford.com


3

I N S I D E

BED/CARGO AREA Cargo Area Products 5 Cargo Organization 6 Covers – Tonneaus 7Covers – Bed Caps 8Liners & Mats 9Tents 10

ELECTRONICS Dash Cams 12Keyless Entry 12Lamps, Lights & Treatments 12Vehicle Security 13Remote Start 13

EXTERIORCovers, Deflectors & Protectors 15Graphics & Stripes 16Fender Flares 16, 17Scoops, Louvers & Grilles 17Spoilers & Body Kits 17Splash Guards 18Trim Kits 18Hitches & Towing 19Hitch Basket & Recovery 20

RACKS & CARRIERSBed & Roof Racks 22Retractable Awning 23Bike Racks, Carriers, Cargo Baskets & Accessories 23 - 28

INTERIORConsole Vaults 30Ash Cup / Smoker’s Pack 30 Comfort & Convenience 30, 31Door Sill Plates 31Floor Liners 31Safety/Emergency Kits 32Seat Covers 33

WHEELS Locks & Lug Nuts 35Air Compressor Kit 35

Contents Page >accessories.ford.comCargo and load capacity limited by weight and weight distribution.

4

B E D / C A R G O A R E A A C C E S S O R I E S



5accessories.ford.comCargo and load capacity limited by weight and weight distribution.

Contents Page >

A. TRUCK BED LIGHTING BY LUMEN®

Light up your bed with this set of two LED Bed Lamps. Simply touch the lens of one of the lamps for two seconds and they both light up. Perfect for vehicles equipped with a tonneau/bed cover.

• No external switches required• Kit includes two LED capacitive-touch lamps and

wiring harness• Hardwired to your vehicle’s electrical system,

no batteries required• LED lamps provide high intensity light with low-current draw• To turn off lamps - touch any lens, or the automatic timer

shuts them off after one hour• For vehicles with or without bedliners• Dealer installation recommended

B. BED EXTENDER BY LUND®

U-shape design is the perfect mix of form and function that helps keep your gear secure.

• Flip it out with the tailgate open to gain up to 2-feet of enclosed cargo area

• Flip it inside and close the tailgate to keep items from sliding around in the truck bed

• Rugged aluminum construction adds corrosion resistance as well as a lightweight product for easy handling

• Black powder coated finish for optimal scratch resistance

• Corrosion resistant hardware included

C. EAZY DOWN TAILGATE ASSIST BY DEE ZEE®

This is just the trick for lowering your tailgate in a safe, controlled manner and then having it come to a soft landing at full open – each and every time.

• Includes corrosion-resistant mounting hardware• Dealer installation recommended

D. TAILGATE LOCK BY MCGARD™

Tailgate Lock is an affordable and efficient way to deter the theft of your truck's tailgate. Simple to install, the locking jaws attach around one of the tailgate's mounting posts on the truck.

• The tailgate lock does not affect normal tailgate operation

• Two keys are included as well as Velcro pads which can be used as shims to prevent the lock from rattling

• Lock the unit and walk away enjoying the peace of mind that comes from knowing your tailgate is secure

A

C D

B

6 accessories.ford.comContents Page >

A. PIVOT STORAGE BOX BY UNDERCOVER™

Swings out nearly 180 degrees with 1.5 cu. ft. of lockable storage.• Fits between the wheel well and back of bed• Constructed of high-impact ABS plastic• Includes handy cup holders molded into lid• Kits available for driver or passenger side

B. HORIZONTAL BED NETHere’s a simple, space-saving – not to mention effective – way to help ensure lightweight goods you place in the bed of your Built Ford Tough® pickup stay put.

• The net is designed to help prevent things from shifting and contents from spilling

• Just stretch the reinforced web-style mesh over the cargo and then cinch in place for a secure, form-fitting hold

• A durable clip at each corner of this all-weather net makes for a quick, straightforward setup in the bed

• Easy do-it-yourself installation

C. VERTICAL BED NETHold a wide assortment of gear securely in place with this flexible envelope-style netting.

• The netting hooks in multiple spots for added cargo versatility

• Easy do-it-yourself installation

D. CARGO MANAGEMENT SYSTEMAn innovative way to store heavy and/or bulky cargo. It utilizes channeling rails that allow you to move a set of cargo cleats, which slide back and forth and allow you to tie down cargo.

• 200lb max load per cleat• Easy to move locking cleats that slide along the rail• Quick 3-fastener installation per rail• Can be used on both Drop-in and Spray-in bedliners• Compact, lightweight, robust attachment• Additional components such as a Bed Divider and

Cross Bars will also be available post launch

A

C D

B

Cargo and load capacity limited by weight and weight distribution.


Contents Page >

E. BED/TONNEAU COVER – SOFT FOLDING BY ADVANTAGE

Trifold design with top-of-rail mount for maximum cargo height space.

• Heavy-duty vinyl covering on a sturdy aluminum frame fits across-the-bed rails

F. BED/TONNEAU COVER – HARD FOLDING BY REV®

The sleek, “no profile” design makes this a favorite. This folding bed/tonneau cover mounts flush with the side of the truck bed.

• Hidden, quick-release latch system automatically locks panels when shut, simply lock the tailgate to secure the bed

F

G

G. BED/TONNEAU COVER – HARD ROLL-UP BY REV®

Flush-mount design has aluminum channels underneath for a sleek “no-profile” look.

• Locking rail design secures the cover the full length of the bed when closed

H. BED/TONNEAU COVER – SOFT ROLL-UP BY TRUXEDO®

Soft Roll Up cover features a top-mount design and sits 1.5" above the truck bed providing distinctive good looks.

• Fabric is designed to help protect your cargo from the elements

• Preset tension control is conveniently integrated into the dual latching system, keeping the cover tight

• Straight cross tubes provide a smooth, flat look when the cover is closed

H

E EClosed Open


A

Large side doors for easy access

Clamp installation, no drilling required

Tinted, twist-out side windows

B

A. BED CAP – SNUGPRO COMMERCIAL BY SNUGTOP®

This SnugTop SnugPro Commercial Cap is fiberglass construction that is durable and provides dry lockable storage for tools, equipment or supplies.

• Fiberglass side doors provide easy side access into the vehicle truck bed and feature Stainless Steel Drop T-Handles with three position locking for added security

• The aluminum framed rear door with fiberglass insert provides additional contents privacy and is complemented with a Stainless Steel Drop-T-Handle

• The rear CHMSL is recessed into the Maverick Commercial Cap rear spoiler

B. BED CAP – SPORT RECREATIONAL BY SNUGTOP®

The Ford Maverick Sport Recreational Truck Cap has the styling and features to make loading, transporting and accessing your equipment for work or play super easy.

• Advanced mid-rise truck cap design• Tinted twist out side windows with removable screens

provide maximum visibility and ventilation• Compound curve all glass rear door with rotary

latch closure and security• LED interior tube light• Built-in LED third brake light • Available in colors to match or complement your

vehicle paint


Contents Page >

C. SPORTLINER WITH TAILGATE COVER BY BEDRUG®

Engineered to stay tough throughout the life of your truck. Made of 100% polypropylene, the sturdy construction makes the liner puncture resistant and durable enough to handle even the heaviest of cargo.

• Tough puncture resistant surface• Rugged construction handles heavy cargo• Comfortable 3/4" thick cushioned surface• Helps prevent cargo from shifting• Stain & UV resistant• Easily cleaned with just water

D. IMPACT BED MAT BY BEDRUG®

Helps protect your bed from dings and dents.

• Anti-skid TPO composite surface• ¾-inch thick flooring helps provide

impact protection• Padded under layer offers a cushion

for the knees• Chemical, stain and water resistant• Installs in minutes, no drilling required

E. BED MATHelp protect your truck bed against dents and dings with this durable, heavy-duty bed mat.

• The mat is made of reinforced synthetic rubber that resists cracking or breaking

• Bed mat is custom-designed to securely fit your truck bed

F. MODULAR BEDLINER KITConstructed of rugged HDPE (High Density Polyethylene) material.

• Chemical, mar, scratch and fade resistant• Fully modular (customer can add/

remove pieces unlike the traditional 1-piece design

• Follows the sheet metal very closely (more so than traditional 1-piece designs) which helps maximize usable volume

• Excellent impact protection• Compatible will most bed accessories

offered by Ford like cargo rails, storage boxes, bed extenders, bed/tonneau covers, eDIY switch, swing case, etc.

G. BED TRAY LINER KITA simple, no-nonsense way of providing excellent impact resistance to – and added protection for – your truck bed.

• Skid-minimizing surface helps reduce cargo movement and is chemical- and stain-resistant

• Raised edge is designed to contain spills• Durable ribbed floor provides airflow

between the bed and tray to reduce moisture build-up

• Molded in black• Easy, no-drill, drop-in installation

H. TAILGATE LINER KITGive your hard-working tailgate the protection it deserves.

• The Ford Tailgate Liner is constructed of heavy-duty, skid-resistant material for years of hard use

• The ribbed surface permits easier drainage and cleaning

• Easily installs without drilling• Molded in black

C D E

F G H


A. HD RACK-MOUNTED TENT BY YAKIMA®

This four-season-rated, 2-person Heavy-Duty Tent provides the ultimate mobile base camp for any season. Features a waterproof PU coating and a weather-shedding water-resistant rainfly.

• Doors, windows and skylights have solid and mesh panels that zip open for ventilation

• Thick, 2.5" wall-to-wall foam mattress includes a removable cover for easy cleaning

• Integrated locks included for added security

• Requires Bed Rack and Crossbars

B. RACK-MOUNTED TENT BY YAKIMA®

Our Tent is constructed of light and breathable 210D nylon with mesh panels for ventilation. The weather-shedding rainfly has a water-resistant coating and for warm, clear evenings, leave it off for faster set-up and a wide-open view.

• Easy to pitch design means less work and more play

• Thick, 2.5" wall-to-wall foam mattress includes a removable cover for easy cleaning

• Made from the same lightweight and breathable materials as backcountry tents – 210D nylon

• All windows and skylight have solid and mesh panels that zip open for ventilation

• Aluminum poles are light, strong and pre-set to make pitching a breeze

• Integrated SKS (Same Key System) locks included for added security

• Ladder and all hardware are included for easy set up

• Requires Bed Rack and Crossbars

B

A

11


E L E C T R O N I C S P R O D U C T S



A. KEYLESS ENTRY KEYPADConveniently unlock your vehicle without your key or keyless entry remote.

• Backlit keypad with black, textured finish• Requires Dealer Programming• Requires Dealer Service Tool (IDS/FDRS)• No wiring• No-drill installation • For Installation Instructions: www.motorcraftservice.com

under Free Resources

B. OFF-ROAD UNDERBODY ROCK LIGHT KITS

These lights are mounted in the wheel well or other strategic locations to enable off-road vehicles to illuminate trails as well as difficult, rocky terrain.

• Each kit contains (4) RIGID® LED Rock Lights plus 15-foot leads to each light, power distribution block, switch, and light mounts

• RIGID® Rock Lights contain a high-quality black aluminum housing with a durable polycarbonate lens

• Kits available with amber or white lensesNOTE: These parts have been designed and are intended for off-highway application only.

C. DASH CAMSDash Cams allow you to film the action while driving, and three Dash Cam bundles are available from Ford Accessories:

1. Dash Cam Only2. Dash Cam with Rear Camera3. Dash Cam with IFR Rear Facing Camera

BA

C 1 C 2 C 3

Each bundle offers:• Full 140 degree viewing angle to help you capture the whole scene• Wide dynamic range helps provide correct exposure and contrast• Motion detector and impact sensor trigger the camera to record when in

Parking Surveillance Mode – camera provides an alert at next power-up letting you know an incident occurred

• Configure dashcam settings with easy to use software

http://www.motorcraftserice.com

13accessories.ford.comContents Page >

D. FORD PERIMETER PLUS VEHICLE SECURITY

Use your factory key fobs to arm and disarm the Ford Perimeter Plus Vehicle Security System.

• When there’s impact to the glass or a body panel, the 2-stage shock sensor determines whether to issue a warning chirp or full alarm

• When activated by your Ford Dealer, the Basic Remote Start System is also included; start your vehicle from up to 300' away

• LED Warning Light Kit also available – lights up when system is activated

E. REMOTE START SYSTEMS

D

E

Add Long Range Remote Start (up to 1000') to your Ford Perimeter Plus Vehicle Security System. Long Range or Long Range with Confirmation systems available.

• Long Range Kit includes two one-button key fobs• Long Range with Confirmation Kit includes one

2-button key fob and logos for key fob• Perimeter Plus Vehicle Security Module is required and

purchased separately• Range Extending Antenna also available to increase

range up to 2500'• NOTE: Remote start is compatible on vehicles equipped

with remote keyless entry and automatic transmission

14

E X T E R I O R P R O D U C T S



A. HOOD PROTECTORS – AEROSKIN BY LUND®

Protects the leading edge of the hood from airborne debris.• Precision engineered to affix directly to the hood surface• Smooth, smoke acrylic construction

B. HOOD PROTECTORS – AEROSKIN II BY LUND®

Protect your hood with style by installing an AeroSkin II hood protector. Adds a new spin to what a hood protector looks like, each AeroSkin II is crafted from high-quality materials and is built to last.

• Helps protect the leading edge of the hood from bugs, stones and other road debris

• Rugged, black textured finish• Constructed of Thermoplastic Olefin (TPO)• No painting or drilling required

C. SIDE WINDOW DEFLECTORS, LOW PROFILE BY LUND®

Deflectors keep out snow or rain so you can crack open the window and let fresh air in.

• Durable, smoke-colored acrylic• Self-stick adhesive for easy installation• Set of four

D. PAINT PROTECTION FILM BY GROUND EFFECTS

This paint protection film kit is extremely durable, virtually invisible and helps protect the paint from day-to-day wear and tear.

• Nearly invisible high-grade polyurethane barrier adheres directly to the vehicle

• Three-piece kit covers the leading edge of the hood and front fenders

• Helps protect the vehicle’s finish from bugs and other road debris

• Helps maintain the vehicle’s resale value

A

C D

B


A 1 2A

A. GRAPHICS KITS BY VISCO

Custom graphics are a great way to customize nearly any vehicle. You can now personalize your new truck with a set of stripes that accentuate the lines of your new truck.

• Made from 3M™ high performance graphic film • Designed to last in even the most extreme conditions • Easy to install

Three styles to choose from:1. Speed Stripe Kit2. Hood/Cowl Stripe Kit3. Sport Stripe Kit

B. POCKET-STYLE FENDER FLARES BY BUSHWACKER®

These big, bold and brash flares finished in matte-black have the bolted-on look that says “in your face,” but in reality, require no drilling for installation.

• Each flare adds 1-1/2" of tire coverage• Made of thick, warp-resistant DuraFlex® 2000 ABS

for durability• Textured, matte-black finish is not meant for paint• Edge trim and hex-head “bolts” are pre-assembled at the

factory for easy installation• No metal to metal contact helps minimize the chances

for corrosion

BA 3


C. FENDER FLARE KIT BY AIR DESIGN®

Designed specifically to complement your vehicle's styling, these wide fender flares are the perfect match for oversized tires and wheels. Pre-assembled, textured black flares come as a set of four.

• Factory painted with scuff-resistant satin black finish

• Manufactured of impact-resistant polyurethane

• Installs right out of the box using 3M™ double-sided tape and polyurethane adhesive

• No drilling required• Corrosion-resistant hardware

D. HOOD SCOOP KIT BY AIR DESIGN®

Customize your Maverick Truck with a precision fitted hood scoop designed to complement the style of your new truck.


• Thermoformed with high impact multilayer ABS Senoplast polymer

• Install-ready, no-drill installation using 3M™ double-sided tape and polyurethane adhesive

E. REAR CAB SPOILER BY AIR DESIGN®

Dress-up the rear of your Maverick Truck with a Roof Spoiler.

• Injection molded with high pressure polyurethane

• Factory painted with scuff-resistant satin black finish, installs right out of the box

• Install ready, no-drill installation using 3M™ double-sided tape and polyurethane adhesive

F. TAILGATE SPOILER BY AIR DESIGN®

Dress-up the rear of your Maverick Truck with a Tailgate Spoiler.



• Install ready, no-drill installation using 3M™ double-sided tape

G. TAILGATE APPLIQUE BY AIR DESIGN®

These satin black tailgate appliques are designed to complement your truck’s style and provide a sporty rear end appearance enhancement.



• Install ready, no-drill installation using double-sided 3M™ adhesive tape

H. DOOR MOLDING KIT BY AIR DESIGN®

These Door Molding kits are sized to fit your Maverick Truck and help provide protection against road debris.


• Injected with lightweight and flexible polyurethane elastomer

• Install ready, no-drill installation using 3M™ double sided tape

EDC

HGF


A. B-PILLAR TRIM, BLACK PLATINUM BY PUTCO®

Add a custom look to your truck with some Black Platinum™ B-pillar trim.

• Made of corrosion-resistant stainless steel for long life

• Black Platinum™ finish is UV resistant to maintain its look

• Available for vehicles with and without keypad

B. TAILGATE LETTERING BY PUTCO®

Dress up your Maverick Truck with this stainless steel tailgate lettering kit.

• Fits perfectly inside the factory lettering channels

• Simple peel-and-stick installation• Available in Polished Stainless Steel

or Black Platinum finish

C. FORD PERFORMANCE SLIM LICENSE PLATE FRAME

High quality slim license plate frames allow you to dress up your vehicle without covering the state designation and registration tags on your license plate.

• Available with brushed stainless steel finish

• Constructed from 304 stainless steel, these frames will complement any Ford Performance fan’s vehicle

• Available in Brushed Stainless Steel or Black Powder Coat finish

D. FORD PERFORMANCE LICENSE PLATE FRAME

High quality license plate frames allow you to dress up your vehicle without covering the state designation and registration tags on your license plate.

• Available with brushed stainless steel finish

• Constructed from 304 stainless steel, these frames will complement any Ford Performance fan’s vehicle

• Available in Brushed Stainless Steel or Black Powder Coat finish

E. MOLDED SPLASH GUARDSContoured molded splash guards designed specifically for your Maverick Truck.

• Help deflect snow, mud and ice away from lower body panels

• Two-piece kits for front or rear

F. HEAVY DUTY GATORBACK®

SPLASH GUARDS BY TRUCK HARDWARE™

Rugged design and custom quality finish helps protect against mud and debris.

• Ford-exclusive kits feature pre-punched holes and all hardware required for installation

• No measuring required, simply assemble and install

• Two-piece kits for front or rear, features black Ford Oval logo over black wrap

C

DBA

FE

Front Front

G. TRAILER HITCH RECEIVER*

This 2" Hitch Receiver assembly allows the use of hitch-mounted accessory carriers or lightweight trailers.

• Black powder coat finish and corrosion-resistant hardware for long-lasting good looks

• Original equipment hitch assembly bolts into existing holes – no drilling or welding required

• Towing capacity can be limited by vehicle powertrain; contact your Dealer for details

I

G

J

H. TRAILER HITCH BALLS*

Ford offers a variety of hitch balls with different capacities.• Forged stainless-steel one-piece construction for maximum

strength and corrosion resistance• Vehicle powertrain, suspension and other equipment all

contribute to towing capacity; please check your vehicle Owner’s Manual for details

Three sizes available:• 1-7/8", 2" and 2-5/16" ball

I. DRAW BARS/BALL MOUNTS*

These ball mounts fit 2" square receivers and are rated for up to 6,000 lb. GTW/600 lb. TW.

• 1" diameter ball hole • 6,000 lb. capacity• Corrosion-resistant black powder coat finish

Two styles available:• 2" rise x 2-3/16" drop• 2" rise x 4" drop

J. LOCKING HITCH PIN BY CURT™

CURT hitch locks allow you to lock your ball mount into your trailer hitch, deterring theft and helping prevent anyone from detaching your trailer at the ball mount.

• 5/8" diameter pin fits 2" x 2" receiver tubes• Carbon steel construction protected by a durable

chrome-plated finish• Easy-to-operate, 1/4-turn lock activation• Watertight dust cap helps prevent internal corrosion• Includes two keys for added convenience

*Vehicle powertrain, suspension and other equipment all contribute to towing capacity. Please check your vehicle Owner's Manual for details.

H

19accessories.ford.comaccessories.ford.com 19Vehicle powertrain, suspension and other equipment all contribute to towing capacity. Please check your vehicle Owner’s Manual for details.Cargo and load capacity limited by weight and weight distribution.

Contents Page >

20 accessories.ford.com Contents Page >

A. TIE DOWN SHACKLE BY CURT™

The CURT D-ring shackle mount is perfect for vehicle recovery or tough jobs off-road and out in the field. It is built with a removable, heavy-duty D-ring shackle, a solid steel shank and a highly durable powder coat finish.

• Fits trailer hitches with a 2" x 2" receiver tube opening

• Can be used with most vehicle recovery straps

• Shank constructed from solid steel for optimum strength

• Protected by a highly durable carbide powder coat finish

B. OFF-ROAD RECOVERY BOARDS – PAIR

These boards offer an aggressive pattern with deep cleats for maximum grip.

• Made from a specially designed polymer to offer strength and flexibility for uneven terrain

• Large hand holds make the boards easy to maneuver, even with gloves

• Sold in pairs• Mount to your bed rack or roof rack

using the Recovery Track Mount by Yakima (sold separately)

C. HITCH-MOUNTED CARGO BASKET BY CURT™

Free up space inside the vehicle with a hitch cargo carrier and bring along your cooler, camping gear, sports equipment, or anything else you can’t go without.

• 6" tall sides help keep items secure during travel

• Constructed from heavy-duty, tubular steel

• Angled shank elevates carrier for more ground clearance

• Mesh base for easy cleanup• Built-in reflectors add visibility • Protected by a highly durable E-coat

and carbide black powder coat finish

D. OFF-ROAD RECOVERY KITSDon’t get stuck off-road without the essentials; this Ford Performance by WARN® Recovery Kit is designed to assist in the recovery of a vehicle stuck in mud, sand, or snow. This comprehensive recovery kit is sure to complement your off-road adventure in any 4x4 vehicle.

Standard Kit

Standard Kit includes:• For use with winches up to 10,000 lb. capacities• “Ford Performance by WARN®” storage bag• “Ford Performance” 2" x 22' blue recovery

strap-rated to 14,400 lbs.• “Ford” branded winching gloves – XL• WARN® 3/4" D-Shackle• Instruction manual

Heavy Duty Kit

Heavy Duty Kit includes:• For use with winches up to 12,000 lb. capacities• “Ford Performance by WARN® storage bag/tote• “Ford Performance” 3" x 30' recovery strap-rated to 21,600 lbs.• Tree trunk protector, 4" x 8' rated to 30,000 lbs.• Heavy-duty Snatch Block with greaseable port • “Ford” branded winching gloves – XL• Two WARN® 3/4" D-Shackles• Instruction manual

CBA

D

D

21Cargo and load capacity limited by weight and weight distribution.


R A C K S & C A R R I E R S B Y YA K I M A ®



A. LOW-PROFILE BED RACKSleek and strong, the Low-Profile Bed Rack’s design allows the use of any Yakima carrier while preserving valuable bed space.

• Easy to reach low profile height position makes it easy to rack out and reach gear

• Maximum capacity – 300 lbs• Simple, tool-free attachment makes installation, removal

and crossbar spread adjustments a breeze• Built to last, with engineered aluminum construction

and durable powder-coat finish• Integrated tie-down points on endcaps make securing

any load quick and simple• T-slot attachments make adding gear mounts and

accessories fast and easy• Integrated SKS locks

B. MEDIUM-PROFILE BED RACKDesigned to handle heavy loads on backcountry terrain, our Medium-Profile Bed Rack is built for rugged overland adventures. Features multiple tie-down points to make securing nearly any load easy.

• Fixed height position of 13" provides easy gear access and a low center of gravity

• Maximum capacity – 300 lbs• Built to last with engineered aluminum construction

and durable powder coat finish• Compatible with all Yakima carriers including kayaks,

surfboards, bikes, rooftop tents and more• T-slot attachments make adding gear mounts and

accessories fast and simple• Integrated SKS locks secure your rack system to

the truck bed

C. ADJUSTABLE BED RACKAdjustable height from 19” to 30” above bed rails to create custom setups for maximum utility and versatility, with easy on-off placement; lockable, with 2 T-slot crossbars.

• Provides full access to the truck bed• 60 Inch T-Slot Crossbars accommodate

Yakima T-Slot accessories

D. REMOVABLE ROOF RACK & CROSSBAR SYSTEM

Lightweight, aerodynamically shaped crossbars.• Compatible with T-Slot accoutrements like Eye Bolts

and Load Stops (sold separately)• Includes Crossbars and Locking Base Towers• Maverick roof capacity is 150 lbs. max

E. TELESCOPING SIDE BARSCreate the ultimate truck bed cargo management system by adding these telescoping bars.

• Adjustable from 36 Inches to 64 Inches• Accepts T-Slot accessories like Eye Bolts, Recovery Track

Mounts, RotoPax Mounts and Tool Holder• Requires Adjustable Bed Rack or Medium Profile

Bed Rack (sold separately)• Set of 2

A

B

C

D

E


Contents Page >

F. RETRACTABLE AWNINGThis Awning helps provide excellent protection from the sun or a sudden shower. It mounts easily to the side of your base rack and only takes up six inches of bar space. Just pull it out windowshade-style and insert the poles when you get to camp.

• 6.5' x 6.5' awning provides 42 sq.ft. of cover• Carrying case takes up only 6" of rack space and includes locks• Fits Yakima roof or bed racks• Easy to pitch – just pull it out, prop it up and settle in• Requires Roof Rack Kit or Adjustable Bed Rack and Crossbars

H. RACK-MOUNTED BIKE RACKRock-solid upright bike carrier.

• Easy to use frame clamp design, self-adjusting jaws automatically adjust to the downtube

• Fits bike frames up to 3-3/8" in diameter and tires up to 2-1/2" wide

• Each carrier holds one bike• Requires Roof Rack Kit or Bed Rack and Crossbars

I. RACK-MOUNTED KAYAK CARRIERWith multiple settings, the Kayak Carrier allows you to carry one boat in J-Cradle position or two boats in vertical, stacker position, plus it folds flat when not in use.

• Fully assembled out of the box, tool-free installation• Requires Roof Rack Kit or Bed Rack and Crossbars• Image shows TWO Kayak Carrier kits

F

HG


A. RACK-MOUNTED CANOE CARRIERThis Canoe Carrier attaches directly to any Yakima rack for a quick, tool-free assembly, right out-of-the-box. The unique design attaches Yakima crossbars with a single tightening knob.

• Easy, tool-free installation• Includes canoe securing straps and bow/stern tie-downs –

everything needed for a single canoe • Durable over-molded rubber cushions the canoe gunwale

while providing stability• Requires Roof Rack Kit or Bed Rack and Crossbars

B. RACK-MOUNTED PADDLEBOARD CARRIER

Holds two SUPs up to 36" wide. The Paddleboard Carrier is fully assembled out-of-the-box, features integrated rollers for easy loading and includes SKS locks.

• Includes everything needed to carry up to 2 SUPs• Nylon coated cables help keep boards secure• Shown with Tool/Paddle Holder (sold separately)• Requires Roof Rack Kit or Bed Rack and Crossbars

C. TOOL HOLDER/PADDLE HOLDERAttaches to most Yakima Racks, Baskets and T-Slot bars.

• Carries tools or paddles with handles of 1.2-inch to 2-inch diameters

D. HITCH-MOUNTED BED/RACK EXTENSION

Adjustable height and tilt to extend Roof Rack or various Bed Racks, provides padded support for longer cargo.

• Includes extension for cab-height load management

DC

A B


Contents Page >

E. RACK-MOUNTED CARGO BASKET – SMALL

Weather-resistant, heavy-duty steel construction for years of use.

• Narrow profile leaves room on bars for bikes, boats, boards or even a tent

• A great addition to your multi-sport rack system, includes fairing to help reduce drag and wind noise

• Dimensions: 58" x 23" x 6.5"• Requires Roof Rack Kit or Bed Rack

and Crossbars

F. RACK-MOUNTED CARGO BASKET – MEDIUM

Comes with aerodynamic wind fairing and integrated crossbars for mounting carriers on top of the basket.

• Fully adjustable accessory crossbars help you secure your load or add accessory mounts

• Installs easily, no tools required• Dimensions: 44" x 40" x 7"• Requires Roof Rack Kit or Bed Rack

and Crossbars

G. RACK-MOUNTED CARGO BASKET – X-LARGE

Heavy-duty steel construction for long life, includes aerodynamic fairing.

• Big 52" x 48" footprint provides plenty of room for your gear

• Heavy-duty cargo net helps keep gear in place• Requires Roof Rack Kit or Bed Rack

and Crossbars

H. RACK-MOUNTED CARGO BOXCarry your gear on the roof with this sleek Cargo Box. The aesthetically pleasing shape also contributes to minimized wind noise.

• Dual-sided opening for easy access on either side of your vehicle

• Big 16 cu. ft. capacity hauls gear for up to 3 campers; fits snowboards and skis up to 185cm

• Dimensions: 81" x 36" x 15" high• Integrated Same Key System (SKS) locks

are built-in for added security• Requires Roof Rack Kit or Bed Rack and

Crossbars

I. CARGO BASKET LIGHT BRACKETS

These brackets come in pairs and mount to the X-Large and Medium Cargo Baskets for adding extra off-road lights for your off-road excursions.

• Heavy-duty powder coated steel construction• For mounting off-road lights (sold

separately) of nearly any size or shape

E

F

G

H

I


A. RACK-MOUNTED SKI/SNOWBOARD CARRIER

Holds up to 6 pairs of skis or 4 snowboards.• Large locking button is easy to use with gloves on

and secures your gear• Aerodynamic shape helps reduce noise when

not in use• Requires Roof Rack Kit or Bed Rack and Crossbars

A

B. HITCH-MOUNTED SKI/SNOWBOARD CARRIER ADAPTER

Convert your 4-Bike Hitch-Mounted Bike Carrier to a ski/snowboard rack.

• Requires Hitch-Mounted 4-Bike Carrier (tilt or swing style)

• Holds up to 6 pairs of skis or 4 snowboards; includes locks

C. TAILGATE BIKE HOLDERCarry up to 5 bikes in the bed of your truck using this innovative bike holder.

• Rugged nylon outer resists abrasion and the elements• Soft felt backing helps protect the truck’s tailgate• Cushioned cradles and straps help protect bikes

from shifting and sliding


CB


Contents Page >

D. HITCH SWING ADAPTER FOR BIKE RACKS*

Converts nearly any 2" hitch-mount bike rack to a swing rack.• Swings open 90 degrees and locks in place with

simple-to-use release lever• 250 lb. maximum capacity• For 2" hitch receivers• Image shows Swing Adapter and Tilt Bike Carrier

(sold separately)

E. HITCH-MOUNTED TILT BIKE RACK (2 BIKES)*

Tilts down with bikes loaded for easy rear-of-vehicle access.• StrongArm hook design secures bike at wheels,

protecting paint and carbon frames• Includes SKS locks for added security; for 1.25" or

2" receivers

F. HITCH-MOUNTED TILT BIKE RACK (4 BIKES)*

Tilts down with bikes loaded for easy rear-of-vehicle access.• Control lever tilts the rack away from the vehicle, folds

flat for storage• Includes SKS locks for added security; for 1.25" or

2" receivers

G. HITCH-MOUNTED SWING BIKE CARRIER (4 BIKES)*

Swings away with bikes loaded for easy rear-of-vehicle access.• Fully padded arms and adjustable cradles provide

superior bike protection• Includes SKS locks for added security; for 2" receivers

*This aftermarket Ford Licensed Accessory is for customer installation only. Ford does not authorize this accessory for installation on a new motor vehicle prior to its first retail sale and Ford does not authorize this accessory for any commercial installation by a dealer or other commercial entity. It must be sold to the customer in a transaction separate from a new car purchase, and it may not be financed in connection with the sale of a new motor vehicle.

G

E

F

D


A. EYE BOLTSThese Eye Bolts integrate seamlessly with most T-slot crossbars, to create instant tie-down points for securing gear. They’re secure, strong and easy to install — just drop them into the slot and twist into place.

• Rugged steel construction with durable black corrosion resistant finish for many years of use

• Includes hardware for both HD Crossbar and standard T-slot crossbars

• Set of two

B. HD HOOK STRAPSHeavy-Duty Hook Straps deliver maximum strength with a proven hook attachment to easily hold larger cargo in place. These straps are quick and easy to adjust – load and go!

• Proven Heavy-Duty Straps with durable, vinyl-coated hooks

• Easily attach to our Eye Bolts, or other tie-down points, for a secure hold

• 10-ft. length handles a wide range of gear and supplies

• Set of two

C. LOAD STOPSBuilt with the strength to keep heavy loads in place, our steel, T-slot Load Stops integrate with T-slot crossbars. Load Stops quickly install into T-slots and adjust with the turn of a knob.

• Simple, tool-free adjustment is done with the turn of a knob

• Built in tie-down points make it easy to secure gear

• Set of four

D. RECOVERY TRACK MOUNTS

A smart, quick, secure way to keep Recovery Tracks (sold separately) on hand and within reach.

• Holds a pair of our Recovery Tracks from Ford Performance

E. SKS LOCK KITThese 4 Same Key System (SKS) lock cores enable you to lock your Yakima products with just one key.

• Fits all lockable Yakima Rack & Carrier accessories

• Includes 4 SKS cores and matching keys

• 4 keys included plus a control key• Core numbers included in prepackaged

locks cannot be specified

F. ROTOPAX MOUNTING KITAdapts the RotopaX™ mounting system for Yakima Crossbars or Telescoping Side Bars.

• Now you can attach up to 40 lbs. of RotopaX™ water and fuel packs (sold separately) to your Yakima Rack system

C

BA

D

FE

29


I N T E R I O R A C C E S S O R I E S



A. CONSOLE VAULT – FRONT SEAT CONSOLE

Conceal and secure your valuables using an in-vehicle safe. Mounts out of sight inside the front console.

• Constructed of 12 gauge cold-rolled steel

• Three-point lock system resists tampering

• The four-digit combination lock offers 10,000 possible combinations

• Easy to install

B. CONSOLE VAULT – REAR UNDERSEAT STORAGE

Conceal and secure your valuables using an in-vehicle safe. Mounts out of sight under the back seat.

• Constructed of 12 gauge cold-rolled steel

• Three-point lock system resists tampering

• The four-digit combination lock offers 10,000 possible combinations

• Easy to install

C. ASH CUP/COIN HOLDERDesigned to fit in cupholders, the ash cup/coin holder includes a lid to keep ashes or spare change in place.

• Constructed of a durable thermoplastic• Removes easily for cleaning

D. SMOKER’S PACKAGE – ASH CUP WITH ELEMENT & SOCKET

Add an ash cup and a lighter to your vehicle.

• The ash cup/coin holder is designed to fit in cup holders and includes a lid to keep ashes or spare change in place

• Constructed of a durable thermoplastic and removes easily for cleaning

• Both the ash cup and lighter mount to the center console

E. WINDSHIELD SUNSCREEN BY COVERCRAFT®

UVS100® Custom Sunscreens feature a triple-laminate construction, the outer silver reflective surface and soft felt inner surface sandwich a foam core heat insulator.

• Custom patterned for maximum windshield coverage

• Triple-laminate construction with insulation barrier

• Soft felt binding and inner layer• Reflective outer layer• Model-specific logo• Grey vinyl storage bag included

F. PORTABLE REFRIGERATOR/FREEZER BY INDEL B®

Cool travel companion. • Use the 19-quart, LED-illuminated

compartment as a fridge or freezer• Features an electronic thermostat,

energy-smart compressor and low-voltage cutout

• Includes carrying strap

CBA

FE

D


G. FORD PERFORMANCE BY ARB 47QT FRIDGE/FREEZER

The perfect fridge/freezer for a couple or a small family heading out for a long weekend away. Featuring a front opening lid unique to the 47 qt. model.

• Features front/rear DC power inlets to allow you greater freedom for mounting

• AC power cord also included for in home use

• 5V outlet to charge USB powered devices• Downloadable App to monitor or

control the fridge via Bluetooth• External Dimensions –

29" (L) x 19" (W) x 22" (H)

H. POLISHED STAINLESS STEEL DOOR SILL PLATES

These rugged Door Sill plates help prevent scrapes and scratches and look good doing it!

• Polished stainless steel finish• Laser-etched Maverick Logos on the

front plates ups the cool factor• Designed to help minimize scratches and

scrapes on your door sill• Made of premium-grade 304

stainless steel• 4-piece set for front and rear

I. BLACK PLATINUM DOOR SILL PLATES

These rugged Door Sill plates help prevent scrapes and scratches and look good doing it!

• Black Platinum™ stainless steel• Laser-etched Maverick Logos on the front

plates ups the cool factor• Designed to help minimize scratches

and scrapes on your door sill• Made of premium-grade 304

stainless steel• 4-piece set for front and rear

J. FLOOR LINERSHelps provide maximum protection from spills, dirt and grime. These Premium Floor Liners help collect the mess so your carpeting doesn’t have to!

• Constructed of durable, pliable molded Thermoplastic Elastomer (TPE) for long life

• Maximum traction, wet or dry• Easy to clean, simply remove from

vehicle and wash with soapy water• 4-piece kit for front and rear, molded

in black• Available for Gas (shown) or

Hybrid Models

G

H

I

J


A

A. NOCO JUMP STARTERSThese portable lithium-ion jump starter packs deliver the power to jump start a dead battery in seconds or work as a portable power source for recharging USB devices. Handy, product-specific carrying cases also available (sold separately).

• Patented technology provides spark-proof connections and reverse polarity protection

• Bright, LED flashlight with multiple modes, including SOS• Available XCG Power Adapter rapidly charges GB70 & GB150

modes (sold separately)Four power levels available:

• GB40: 1000 amps • GB50: 1500 amps• GB70: 2000 amps • GB150: 3000 amps

B. FORD INTEGRATED TETHER SYSTEM (FITS) PACKAGE

The FITS Accessory Package has several accessories designed to fit in the FITS receivers located at the rear of the console and under the back seat. Included in the package are:

• Cup holder (shown)• Phone cord organizer• Bag hooks• Storage/Trash bin (shown)• Multiple dividers for the under-seat storage area

C. FIRST AID KIT BY DC SAFETY™

First Aid Kit keeps supplies in a compact, fire-retardant case that’s the perfect fit for nearly any vehicle. Kit includes:

• Custom-molded case with Ford Logo• Assorted bandages, gauze and adhesive tape• Emergency survival blanket• Latex-free gloves• Scissors and tweezers and much more

D. ROADSIDE ASSISTANCE KITBundled in a handy fire-retardant case, our Roadside Assistance Kit contains many items to help make you prepared for nearly any roadside emergency. Kit includes:

• Handy, soft carrying case with Ford Logo• Booster cables and warning triangle• Reflective safety vest, rain poncho and survival blanket• Assorted tools, lights, tape and towels• First aid kit with assorted bandages and much more

E. COMMERCIAL ROADSIDE ASSISTANCE KITBundled in a handy fire-retardant case, our Commercial Roadside Assistance Kit contains many items to help make you prepared for nearly any roadside emergency. Kit includes:

• Handy, soft Ford carrying case• 3 DOT Compliant Warning Triangles• 1A:10BC Fire Extinguisher• Two – 12" x 12" Red Vinyl Traffic Flags• Reflective safety vest, rain poncho and survival blanket• Assorted tools, lights, tape and towels• First aid kit with assorted bandages and much more

C

E

B

D


Contents Page >

F. NEOSUPREME FRONT SEAT COVERS BY COVERKING®

Neosupreme custom-fit seat covers are designed to protect your seats and are great when you want a sporty look or have an active lifestyle.

• Super comfortable with enough stretch for an extremely sleek fit

• Soft cushioned foam layer adds to the comfort of your ride

• Excellent water resistance

G. PET REAR SEAT COVERS BY 4KNINES®

For owners who want nothing but the best when travelling with their pet. These heavy-duty seat covers provide premium comfort and protection and they look great, too!

• Easy to install or remove for cleaning • Provides access to all rear seat belts

and LATCH system • Made of waterproof material, however

seams and Velcro openings are not waterproof

• Charcoal covering complements your interior

H. CARHARTT GRAVEL FRONT SEAT COVERS BY COVERCRAFT®

Carhartt® Seat Covers by Covercraft® help protect your seats from the rigors of everyday use. No need to worry about wear, tear, stains or sun fade with a Carhartt® seat cover.

• Vest-style design is compatible with seat-mounted airbags

• Easy access to seat belt and seat controls• Overlapped, triple-stitched main seams• Carhartt® seat covers feature signature

Carhartt® rivets on map pockets• Carhartt® duck weave fabric• Custom patterned for an excellent fit

I. TWILL CHARCOAL FRONT SEAT COVERS BY COVERCRAFT®

Covercraft® SeatSaver™ seat covers help protect your seats from the rigors of everyday use. No need to worry about wear, tear, stains or sun fade with a SeatSaver™ seat cover.

• Vest-style design is compatible with seat-mounted airbags

• Easy access to seat belt and seat controls

F

G

H

I

34

W H E E L A C C E S S O R I E S



A. WHEEL LOCK KITHelp prevent wheel and tire theft on your vehicle with these good-looking, chrome-plated Wheel Locks. Use them to replace one lug nut on each wheel as a welcome measure of added security for your vehicle.

• Chrome-plated locks available to replace exposed lugs• Kit includes 4 locks and a key

A B

B. BLACK LUG NUTSFord Performance Parts Black Lug Nuts use Physical Vapor Deposition technology (PVD) which provides a scratch and wear resistance finish that ensures a perfect look for an extended period of time under intense use and provides surface wear resistance that cannot be provided by electroplating, anodizing or lacquer.

• Fits M14 x 1.5 wheel stud • Full vehicle kit includes 20 lug nuts, single wheel kit also

available contains 5 lug nutsNOTE: Hand installation and removal with non-marring lug nut sockets is strongly recommended to prevent surface damage to the black lug nuts.

C. FORD PERFORMANCE OFF-ROAD AIR COMPRESSOR KIT BY ARB

This portable kit includes a 19-foot air hose, battery clamps, and an ARB air chuck with quick press fitting – all in a durable carrying case.

• Sealed for moisture and dust resistance• Hard-anodized cylinder bore• Teflon-impregnated carbon fiber piston seal• Over-pressure safety valve equipped• Motor is internally thermal protected against extreme

temperature damage• Heavy-duty MAXI fuse equipped for inline

circuit protection

C


LIMITED WARRANTY INFORMATION FOR FORD ORIGINAL ACCESSORIESFord Original Accessories will be warranted for whichever provides you

the greatest benefit: 24-months/unlimited mileage, or the remainder of your Bumper-to-Bumper 3-year/36,000-mile New Vehicle Limited Warranty.

FORD LICENSED ACCESSORIES (FLA) ARE WARRANTED BY THE ACCESSORY MANUFACTURER’S WARRANTY

FLA are designed and developed by the accessory manufacturer and have not been designed or tested to Ford Motor Company engineering requirements.

FLA will be warranted by the accessory manufacturer for whichever provides you with the greatest benefit: 24-months/unlimited mileage or the remainder

of your Bumper-to-Bumper 3-year/36,000-mile New Vehicle Limited Warranty if bought at time of vehicle sale.

FORD PERFORMANCE PARTS WARRANTIESCheck the Ford Performance Parts website: www.performanceparts.ford.com for the latest limited warranty information on specific products. Contact your

Ford Dealer for details and/or a copy of all limited warranties.

OWNER’S GUIDEAlways refer to the Owner's Guide to determine roof rack

capacities and towing capabilities.

Information and images contained in this publication were correct at the time of printing, changes in offerings, descriptions and availability may have occurred. Some vehicle representations shown with optional equipment. Colors are representative only. Ford reserves the right to change product specifications at any time without incurring obligations.Images are a mix of preproduction CGI and actual images. Many images include props that are not included. Recreation equipment not included. Some accessories may be shown on Ford vehicles other than Maverick.AeroSkin is a registered trademark of Lund, Inc. Yakima is a registered trademark of Yakima Products, Gatorback is a registered trademark of Truck Hardware Ltd. Carhartt is a registered trademark of Carhartt, Inc. Coverking is a registered trademark of Coverking, Inc. ARB is a registered trademark of ARB Industries, Ltd. All other trademarks, service marks, images and logos are property of their respective owners. All rights reserved.



October, 2021 ABT-4711© 2021, Ford Motor Company


http://www.performanceparts.ford.com

MAVERICK ACCESSORIES

Documents