05/23/18 MATS347 | University of Plymouth MATS347 (Academic Year 2016/17) Composites Design and Manufacture A core module for BEng/MEng (honours) Mechanical Engineering with Composites. View Online 400 items Course webpage (1 items) Composites Design and Manufacture (MATS347) Webpage | MATS347 module webpage: Essential Reading (4 items) MATS347 module webpages Webpage | Essential | Subject index: Manufacturing of polymer composites - �Astr�om, B. T., 1997. Book | Recommended An introduction to composite materials - Hull, D., Clyne, T. W., 1996. Book | Recommended Review papers Webpage | Module webpage Materials Selection and Characterisation (209 items) Composites Design and Manufacture Webpage | MATS347 webpage: Plastics materials - Brydson, J. A., 1999. Book Fundamentals of fibre reinforced composite materials - Bunsell, A. R., Renard, J., 2005. Book Physical methods for materials characterisation - Flewitt, P. E. J., Wild, R. K., 1994. Book Microstructural characterisation of fibre-reinforced composites - Summerscales, John., 1998. Book Specifications and standards for plastics and composites - Traceski, Frank T., 1990. Book 1/33
33
Embed
MATS347 View Online (Academic Year 2016/17) fileMicrostructural characterisation of fibre-reinforced composites - Summerscales, John., 1998 Book DR Mulligan, SL Ogin, PA Smith, GM
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
05/23/18 MATS347 | University of Plymouth
MATS347(Academic Year 2016/17)
Composites Design and Manufacture A core module forBEng/MEng (honours) Mechanical Engineering withComposites.
View Online
400 items
Course webpage (1 items)
Composites Design and Manufacture (MATS347)Webpage | MATS347 module webpage:
Interfaces. Interphases. Voids. Meso-mechanics (fibre clustering).Webpage | Module element webpage
Microstructural design of fiber composites - Chou, Tsu-Wei., 1992.Book
Microstructural characterisation of fibre-reinforced composites - Summerscales, John.,1998
Book
DR Mulligan, SL Ogin, PA Smith, GM Wells and CM Worrall - Fibre-bundling in a short-fibrecomposite, Composites Science and Technology, 2003, 63(5), 715-725.
Article | Elsevier ScienceDirect
J Summerscales, FJ Guild, NRL Pearce and PM Russell, Voronoi cells, fractal dimensions andfibre composites, Journal of Microscopy, February 2001, 201(2), 153-162.
Article
Jang-Kyo Kim and Yiu-wing Mai - High strength, high fracture toughness fibre compositeswith interface control: a review, Composites Science and Technology, 1991, 41(4),
JDH Hughes - The carbon fibre/epoxy interface: a review, Composites Science andTechnology, 1991, 41(1), 13-45.
Article | Elsevier ScienceDirect
Leon Mishnaevsky - Computational mesomechanics of composites: numerical analysis ofthe effect of microstructures of composites on strength and damage resistance, Wiley, July2007. ISBN-13: 9780470027646.
Article | Elsevier Composite Materials series 09 | Purchase for Library stock requested
K Friedrich - Application of Fracture Mechanics to Composite Materials, Elsevier, 1989.ISBN 0-444-87286-8.
Webpage | Elsevier Composite Materials series 06 | Purchase for Library stock requested
AO Addin, SM Sapuan, E Mahdi and M Othman - Prediction and detection of failures inlaminated composite materials using neural networks - a review, Polymers and PolymerComposites, 2006, 14(4), 433-441.
Webpage | RAPRA Journals
LN McCartney - Physically based damage models for laminated composites, Proceedings ofthe Institution of Mechanical Engineers - Part L: Journal of Materials: Design & Applications,2003, 217(3), 163-199.
Article | Business Source
T Kant and K Swaminathan - Estimation of transverse/interlaminar stresses in laminatedcomposites: a selective review and survey of current developments, Composite Structures,2000, 49(1), 65-75.
Article | Elsevier ScienceDirect
Holger Thom - A review of the biaxial strength of fibre-reinforced plastics, Composites PartA: Applied Science and Manufacturing, 1998, 29(8), 869-886.
Article | Elsevier ScienceDirect
GJ Simitses - Buckling of moderately thick laminated cylindrical shells: a review,Composites Part B: Engineering, 1996, 27(6), 581-587.
Article | Elsevier ScienceDirect
MR Piggott - The effect of fibre waviness on the mechanical properties of unidirectionalfibre composites: a review, Composites Science and Technology, 1995, 53(2), 201-205.
Article | Elsevier ScienceDirect
Kimberley Dransfield, Caroline Baillie and Yiu-Wing Mai, Improving the delaminationresistance of CFRP by stitching�a review, Composites Science and Technology, 1994, 50(3),305-317.
Article | Elsevier ScienceDirect
AC Garg and Yiu-Wing Mai, Failure mechanisms in toughened epoxy resins: a review,Composites Science and Technology, 1988, 31(3), 179-223.
Article | Elsevier ScienceDirect
S Sridharan, Delamination behaviour of composites, Woodhead Publishing, Cambridge,2008. ISBN-13: 978 1 84569 244 5.
Webpage | Purchase for Library Stock Requested.
A05: Creep - fatigue - impact (11 items)
Creep. Fatigue. ImpactWebpage | Module element webpage
Impact on composite structures - Abrate, Serge,, 1998.Book
Fatigue in composites : science and technology of the fatigue response of fibre-reinforcedplastics - Harris, Bryan., 2003.
Book
Design of composite structures against fatigue : applications to wind turbine blades -Mayer, Rayner M., 1996.
Book
The determination of dynamic properties of polymers and composites - Read, B. E., Dean,G. D., 1978.
Book
Impact behaviour of fibre-reinforced composite materials and structures - Reid, S. R.,Zhou, G., 2000.
Book
Fatigue of composite materials - Talreja, R., 1987.Document
MOW Richardson and MJ Wisheart, Review of low-velocity impact properties of compositematerials, Composites Part A: Applied Science and Manufacturing, 1996, 27(12),1123-1131.
Article | Elsevier ScienceDirect
KL Reifsnider, Fatigue of Composite Materials, Elsevier, 1991. ISBN 0-444-70507-4.Webpage | Elsevier Composite Materials series 04 | Purchase for Library stock requested
A Bhatnagar - Lightweight ballistic composites: Military and law-enforcement applications,Woodhead, Cambridge, 2006. ISBN 1-85573-941-0.
Life cycle assessment and environmental impact of polymeric products - O'Neill, T. J.,Rapra Technology Limited., 2003.
Book
Polymers and the environment - Scott, Gerald., 1999.Book
Andrej Krzan, S Hemjinda, S Miertus, A Corti and E Chiellini [24 references],Standardization and certification in the area of environmentally degradable plastics,Polymer Degradation and Stability, December 2006, 91(12), 2819-2833.
Article | Elsevier ScienceDirect
VV Rajan, WK Dierkes, R Joseph and JWM Noordermeer - Science and technology of rubberreclamation with special attention to NR-based waste latex products, Progress in PolymerScience, September 2006, 31(9), 811-834.
Article | Elsevier ScienceDirect
SJ Pickering - Recycling technologies for thermoset composite materials: current status,Composites Part A: Applied Science and Manufacturing, August 2006, 37(8), 1206-1215.
Article | Elsevier ScienceDirect
B Adhikari, D De and S Maiti - Reclamation and recycling of waste rubber, Progress inPolymer Science , 2000, 25(7), 909-948.
Article | Elsevier ScienceDirect
A09: Sustainable Composites (34 items)
Sustainable compositesWebpage | Module element webpage
Green composites : polymer composites and the environment - Baillie, Caroline., 2004.Book
N Chand and M Fahim - Tribology of natural fiber polymer composites, WoodheadPublishing, Cambridge, 2008. ISBN-13: 978-1-84569-393-0.
Webpage
PA Fowler, JM Hughes and RM Elias, Biocomposites: technology, environmental credentials
and market forces, Journal of the Science of Food and Agriculture, 2006, 86(12),1781-1789.
Webpage
Sustainability in agriculture - Hester, R. E., Harrison, Roy M.,, 2005.Book
Bio-based polymers and composites - Wool, Richard P., Sun, Xiuzhi Susan., c2005.Book
Renewable biological materials for non-food use - the impact of EU research (1998-2004) EUR 21466. ISBN 9289489774 (2006).
Webpage
A strategy for non-food crops and uses: creating value from renewable materials(DTI/Defra, 2004).
Webpage
K Pickering, Properties and performance of natural-fibre composites, Woodhead Publishing,Cambridge, 2008. ISBN-13: 978 1 84569 267 4.
Webpage | Purchase for Library Stock Requested
A9a: Natural fibres (14 items)
Natural fibresWebpage | Module element webpage
Bast and other plant fibres - Franck, Robert R., Textile Institute,, 2005.Book
Natural fibers, biopolymers, and biocomposites - Mohanty, Amar K., Misra, Manjusri., Drzal,Lawrence T., 2005.
Book
Flax : the genus linum - Muir, Alister D., Westcott, Neil D., 2003.Book
The biology and processing of flax - Sharma, H. S. S., Sumere, C. F. van., 1992.Book
Linseed law : a handbook for growers and advisers - Turner, John, BASF United Kingdom.,1987.
Book
SV Joshi, LT Drzal, AK Mohanty and S Arora - Are natural fiber composites environmentallysuperior to glass fiber reinforced composites?, Composites Part A: Applied Science andManufacturing, 2004, 35(3), 371-376.
Article | Elsevier ScienceDirect
A Stamboulis, CA Baillie and T Peijs, Effects of environmental conditions on mechanicaland physical properties of flax fibers, Composites Part A: Applied Science andManufacturing, August 2001, 32(8), 1105-1115.
Peter Zugenmaier - Conformation and packing of various crystalline cellulose fibers,Progress in Polymer Science, 2001, 26(9), 1341-1417.
Article | Elsevier ScienceDirect
Yan Li, Yiu-Wing Mai and Lin Ye - Sisal fibre and its composites: a review of recentdevelopments, Composites Science and Technology, 2000, 60(11), 2037-2055.
Article | Elsevier Science Direct
J Schurz - A bright future for cellulose, Progress in Polymer Science, 1999, 24(4), 481-483.Article | Elsevier ScienceDirect
AK Bledzki and J Gassan, Composites reinforced with cellulose based fibers, Progress inPolymer Science, 1999, 24(2), 221-274.
Article | Elsevier ScienceDirect
HSS Sharma, PC Mercer and AE Brown, A review of recent research on the retting of flax inNorthern Ireland, International Biodeterioration, 1989, 25(5), 327-342.
Article | Elsevier ScienceDirect
Pierre Bouloc and Collectif France Agricole - Le Chanvre Industriel: production etutilisations, Librarie Eyrolles, Paris, 2006 (in French). ISBN13: 978-2-85557-130-0.
Webpage | Purchase for Library stock requested
A9b: Bio-based resins (7 items)
Bio-based and biodegradable resinsWebpage | Module element webpage
Sustainable development in practice : case studies for engineers and scientists - Azapagic,Adisa., Perdan, Slobodan., Clift, R., c2004.
Book
Vinay Sharma and PP Kundu - Addition polymers from natural oils - a review, Progress inPolymer Science, 2006, 31(11), 983-1008.
Article | Elsevier ScienceDirect
F Seniha Güner, Yusuf Yagci and A Tuncer Erciyes - Polymers from triglyceride oils,Progress in Polymer Science, 2006, 31(7) 633�670.
Article | Elsevier ScienceDirect
Long Yu, Katherine Dean and Lin Li, Polymer blends and composites from renewableresources, Progress in Polymer Science, June 2006, 31(6), 576�602.
Article | Elsevier ScienceDirect
Anders Södergård and Mikael Stolt - Properties of lactic acid based polymers and theircorrelation with composition, Progress in Polymer Science, 2002, 27(6), 1123-1163.
Article | Elsevier ScienceDirect
R Chandra and R Rustgi, Biodegradable polymers, Progress in Polymer Science, 1998,
David Lawrence and Prodpran Siritheerasas - Incineration of high-moisture-contentmunicipal waste using agricultural waste as a secondary fuel, Linköpings UniversitetDepartment of Physics and Measurement Technology, Biology and Chemistry (IFM), nodate!
Webpage
A10: Core materials for sandwich panels (2 items)
Core materials for sandwich panelsWebpage | Module element webpage
Smart technologies - Worden, K., Bullough, W. A., Haywood, J., c2003.Book
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of AerospaceEngineering, 2007, Volume 221 Number 4 - special isssue on smart materials
Foresight Smart Materials Taskforce - Smart materials for the 21st century, Institute ofMaterials, Minerals and Mining report FMP/03/04/IOM3, 2003.
Webpage
Smart Materials and Structures (journal)Webpage | Institute of Physics e-resource
Basudam Adhikari and Sarmishtha Majumdar - Polymers in sensor applications, Progress inPolymer Science, 2004, 29(7), 699-766.
Article | Elsevier ScienceDirect
J Wang and G Meng - Magnetorheological fluid devices: principles, characteristics andapplications in mechanical engineering, Proceedings of the Institution of MechanicalEngineers L: Journal of Materials: Design & Applications, 2001, 215(3), 165-174.
Pulse : the next frontier - Frenay, Robert,, 2006.Book
Peter Pearce - Structure in Nature is a Strategy for Design, MIT Press, Cambridge MA &London, 1978. ISBN 0-262-16064-1.
Webpage | On order
Comparative biomechanics : life's physical world - Vogel, Steven,, c2003.Book
A15: Ceramic matrix composites (CMC). Metal matrix composites(MMC). (23 items)
Metal matrix composites (MMC) - Ceramic matrix composites (CMC)Webpage | Module element webpage
Metal and ceramic matrix composites - Cantor, B., Dunne, Fionn., Stone, Ian, Oxford-KobeMaterials Seminar, Institute of Physics (Great Britain), c2004.
Book
Metal and ceramic based composites - Mile�iko, S. T., 1997.Book | Elsevier Composite Materials series 12
MR Winstone, A Partridge and JW Brooks - The contribution of advanced high-temperaturematerials to future aero-engines, Proceedings of the Institution of Mechanical Engineers -Part L: Journal of Materials: Design & Applications, 2001, 215(2), p63-73.
AR Boccaccini, C Kaya and KK Chawla - Use of electrophoretic deposition in the processingof fibre reinforced ceramic and glass matrix composites: a review, Composites Part A:Applied Science and Manufacturing, 2001, 32(8), 997-1006.
Introduction to metal matrix composites - Clyne, T. W., Withers, P. J., 1993.Book
Metal matrix composites - Fridl�i�ander, I. N., 1995.Book
Corrosion of aluminium-based metal matrix composites - Lucas, K. A., Clarke, H., 1993.Book
Metal matrix composites : custom-made materials for automotive and aerospaceengineering - Kainer, K. U., c2006.
Book
Composite materials. - Metcalfe, Arthur G., 1974.Book
Hybrid and Select Metal Matrix Composites - Renton, W. J., 1977.Document
Microstructure formation during solidification of metal matrix composites - Rohatgi,Pradeep., 1993.
Book
Introduction to metal matrix composite materials - Schoutens, Jacques E., Tempo, Kaman.,Metal Matrix Composites Information Analysis Center,, 1982.
Document
Metal matrix composites : thermomechanical behavior - Taya, Minoru., Arsenault, R. J.,1989.
Book
Metal-matrix composites : current developments and future trends in industrial researchand applications - Terry, Brian., Jones, Glyn,, 1990.
Book
Metal matrix composites - Chawla, Nikhilesh., Chawla, Krishan Kumar,, 2006.Book
S Basavarajappa, G Chandramohan, KVN Rao, R Radhakrishanan and V Krishnaraj -Turning of particulate metal matrix composites - review and discussion, Proc IMechE Part
B: Journal of Engineering Manufacture, 2006, 220(7), 1189-1204.Webpage | Journal article from Business Source Premier
A16: Nanotechnology (23 items)
NanotechnologyWebpage | Module element webpage
Carbon nanotubes and related structures : new materials for the twnty-first century -Harris, Peter J. F., 1999.
Book
Nanomaterials : toxicity, health and environmental issues - Kumar, C. S. S. R., 2006.Book
Nano mechanics and materials : theory, multiscale methods and applications - Liu, W. K.,Karpov, Eduard G., Park, Harold S., c2006.
Book
M Terrones - Carbon nanotubes, synthesis and peroperties, electronic devices and otheremerging applications, International Materials reviews, 2004, 49(6), 325-377.
Webpage
GG Tibbetts, ML Lake, KL Strong and BP Rice, A review of the fabrication and properties ofvapor-grown carbon nanofiber/polymer composites, Composites Science and Technology,June 2007, 67(7-8), 1709-1718.
Article | Elsevier ScienceDirect
RF Gibson, EO Ayorinde and Y-F Wen - Vibrations of carbon nanotubes and theircomposites: a review, Composites Science and Technology, 2007, 67(1), 1-28
Article | Elsevier ScienceDirect
EPS Tan and CT Lim - Mechanical characterization of nanofibers: a review, CompositesScience and Technology, 2006, 66(9), 1102-1108. ISSN 0266-3538.
Article | Elsevier ScienceDirect
Kin-tak Lau, Chong Gu and David Hui - A critical review on nanotube andnanotube/nanoclay related polymer composite materials, Composites Part B: Engineering,2006, 37(6), 425-436.
Article | Elsevier ScienceDirect
ET Thostenson, Chunyu Li and Tsu-Wei Chou - Nanocomposites in context, CompositesScience and Technology, 2005, 65(3-4), 491-516.
Article | Elsevier ScienceDirect
R Murugan and S Ramakrishna - Development of nanocomposites for bone grafting,Composites Science and Technology, 2005, 65(15-16), 2385-2406.
Article | Elsevier ScienceDirect
Ludwik Leibler - Nanostructured plastics: Joys of self-assembling, Progress in Polymer
Changchun Wang, Zhi-Xin Guo, Shoukuan Fu, Wei Wu and Daoben Zhu - Polymerscontaining fullerene or carbon nanotube structures, Progress in Polymer Science, 2004,29(11), 1079-1141.
Article | Elsevier ScienceDirect
Zheng-Ming Huang, Y-Z Zhang, M Kotaki and S Ramakrishna - A review on polymernanofibers by electrospinning and their applications in nanocomposites, CompositesScience and Technology, 2003, 63(15), 2223-2253.
Article | Elsevier ScienceDirect
Suprakas Sinha Ray and Masami Okamoto - Polymer/layered silicate nanocomposites: areview from preparation to processing, Progress in Polymer Science, 2003, 28(11),1539-1641.
Article | Elsevier ScienceDirect
Tianbo Liu, Christian Burger and Benjamin Chu - Nanofabrication in polymer matrices,Progress in Polymer Science, 2003, 28(1), 5-26.
Article | Elsevier ScienceDirect
Koji Ishizu, Keiichiro Tsubaki, Akihide Mori and Satoshi Uchida - Architecture ofnanostructured polymers, Progress in Polymer Science, 2003, 28(1), 27-54.
Article | Elsevier ScienceDirect
ET Thostenson, Zhifeng Ren and Tsu-Wei Chou - Advances in the science and technologyof carbon nanotubes and their composites: a review, Composites Science and Technology,2001, 61(13), 1899-1912.
Article | Elsevier ScienceDirect
Ignac Capek - Nanocomposite structures and dispersions, Elsevier, 2006. ISBN0-444-52716-8.
Webpage | Purchase for Library stock requested
Joseph Koo - Polymer Nanocomposites, McGraw Hill, 2006, ISBN 0-07-145821-2.Webpage | Purchase for Library stock requested
Y Mai and Z Yu - Polymer nanocomposites, Woodhead, Cambridge, 2006. ISBN-13:978-1-85573-969-7.
Webpage | Purchase for Library Stock requested
GA Ozin and A Arsenault - Nanochemistry: A Chemical Approach to Nanomaterials, RoyalSociety of Chemistry, Cambridge, 2005. ISBN 0-85404-664-x.
Webpage | Purchase for Library stock requested
SC Tjong - Nanocrystalline Materials: Their Synthesis-Structure-Property Relationships andApplications, Elsevier, 2006. ISBN 0-08-044697-3.
Webpage | Purchase for Library stock requested
Composite materials technology: neural network applications - S. M. Sapuan, I. M. Mujtaba,c2010
Introduction to composite materials design - Barbero, Ever J., c1999.Book
IM Daniel and O Ishai - Engineering mechanics of composite materials, Oxford UniversityPress, Oxford, 1994. ISBN 0-19-507506-4.
Document
Design and manufacture of composite structures - Eckold, Geoff., 1994.Book
Handbook of polymer composites for engineers - Hollaway, L., British Plastics Federation.,1994.
Book
An introduction to composite products : design, development and manufacture - Potter,Kevin., 1997.
Book
Engineering with polymers - Powell, Peter C., Housz, A. Jan Ingen., 1998.Book
Composites : design manual - Quinn, J. A., 1998.Book
K He, SV Hoa and R Ganesan - The study of tapered laminated composite structures: areview, Composites Science and Technology, 2000, 60(14), 2643-2657.
Article | Elsevier ScienceDirect
NetCompositesWebpage | A comprehensive portal containing indispensable information for composites
professionals, including a calendar, glossary, directory, guide to composites, industry newsand the world�s largest online stores for composites information.
EJ Barbero, Finite Element Analysis of Composite Materials, CRC Press, Boca Raton FL,August 2007. ISBN-13: 978-1-42005433-0.
Principles of the Manufacturing of Composite Materials - SV Hoa, January 2009Book
Composites manufacturing : materials, product, and process engineering - Mazumdar,Sanjay K., 2001.
Book
Fundamentals of composites manufacturing : materials, methods and applications -Strong, A. Brent., 1989.
Book
E Lacoste, O Mantaux and M Danis, Numerical simulation of metal matrix composites andpolymer matrix composites processing by infiltration: a review, Composites Part A: AppliedScience and Manufacturing, 2002, 33(12), 1605-1614.
Article | Elsevier ScienceDirect
Teik-Cheng Lim and S Ramakrishna - Modelling of composite sheet forming: a review,Composites Part A: Applied Science and Manufacturing, 2002, A33(4), 515-537.
Article | Elsevier ScienceDirect
Rongzhi Li, Lin Ye and Yiu-Wing Mai - Application of plasma technologies in fibre-reinforcedpolymer composites: a review of recent developments, Composites Part A: Applied Scienceand Manufacturing, 1997, 28(1), 73-86.
Article | Elsevier ScienceDirect
ET Thostenson and T-W Chou - Microwave processing: fundamentals and applications,Composites Part A: Applied Science and Manufacturing, 1999, A30(9), 1055-1071.
Article | Elsevier ScienceDirect
AC Long (editor) - Composites Forming Technologies, Woodhead, Cambridge, 2007. ISBN1-84569-033-8.
Webpage | Purchase for Library stock requested
C01: Reinforcement fibres (4 items)
Reinforcement fibresWebpage | Module element webpage
AR Bunsell, Fibre Reinforcements for Composite Materials, Elsevier, 1988. ISBN0-444-42801-1.
Webpage | Elsevier Composite Materials series 02 | Purchase for Library stock requested
AJ McLaren, Design and Performance of Ropes for Climbing and Sailing, Proceedings of theInstitution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications,2006, 220(1), 1 - 12.
Article | Business Source
I Chodák - High modulus polyethylene fibres: preparation, properties and modification bycrosslinking, Progress in Polymer Science, 1998, 23(8), 1409-1442.
Article | Elsevier ScienceDirect
C02: Reinforcement fabrics (17 items)
Reinforcement fabricsWebpage | Module element webpage
Textile structural composites - Ko, Frank K., Chou, Tsu-Wei., 1989.Book | Elsevier Composite Materials series 03
Encyclopedia of textiles, fibers, and nonwoven fabrics - Grayson, Martin,, c1984.Book
Textile science - Hatch, Kathryn L., 1993.Book
Handbook of technical textiles - Horrocks, A. Richard., Anand, S.C., Textile Institute,, 2000.Book
Design and manufacture of textile composites - Long, A. C., 2005Book
3-D textile reinforcements for composite materials - Miravete, Antonio., 1999.Book
Physical properties of textile fibres - Morton, W. E., Hearle, J. W. S., Textile Institute,, 1993.Book
Zheng Ming Huang and S Ramakrishna - Micromechanical modeling approaches for thestiffness and strength of knitted fabric composites: a review and comparative study,Composites Part A: Applied Science and Manufacturing, 2000, A31(5), 479-501.
Article | Elsevier ScienceDirect
KH Leong, S Ramakrishna, ZM Huang and GA Bibo, The potential of knitting forengineering composites, Composites Part A: Applied Science and Manufacturing, 2000,A31(3), 197-220.
Ryuta Kamiya, BA Cheeseman, P Popper and T-W Chou - Some recent advances in thefabrication and design of three-dimensional textile preforms: a review, Composites Scienceand Technology, 2000, 60(1), 33-47.
Article | Elsevier ScienceDirect
AP Mouritz, MK Bannister, PJ Falzon and KH Leong - Review of applications for advancedthree-dimensional fibre textile composites, Composites Part A: Applied Science andManufacturing, 1999, A30(12), 1445-1461.
Article | Elsevier ScienceDirect
AP Mouritz, KH Leong and I Herszberg - A review of the effect of stitching on the in-planemechanical properties of fibre-reinforced polymer composites, Composites Part A: AppliedScience and Manufacturing, 1997, 28(12), 979-991.
Article | Elsevier ScienceDirect
P Tan, L Tong and GP Steven - Modelling for predicting the mechanical properties of textilecomposites: a review, Composites Part A: Applied Science and Manufacturing, 1997,A28(11), 903-922.
Article | Elsevier ScienceDirect
J Hu, 3-D fibrous assemblies: Properties, applications and modelling of three-dimensionaltextile structures (Woodhead Textiles Series #74), Woodhead Publishing, Cambridge,2008. ISBN-13: 978-1-84569-377-0.
Webpage | Purchase for Library Stock Requested
P Schwartz, Structure and mechanics of textile fibre assemblies (Woodhead Textiles Series#80), Woodhead Publishing, Cambridge, 2008. ISBN-13: 978-1-84569-135-6.
Webpage | Purchase for Library Stock Requested
C03: Mould tools (1 items)
Mould toolsWebpage | Module element webpage
C04: Health and Safety. Rheology. (4 items)
Health & SafetyWebpage | Module element webpage
Risk assessmentsWebpage | Module element webpage
RheologyWebpage | Module element webpage
Chemicals in the environment : assessing and managing risk - Hester, R. E., Harrison, R.M., Royal Society of Chemistry (Great Britain), 2006.
C05: Contact moulding: hand-lamination and spray techniques (1 items)
Contact moulding: hand lamination and spray techniquesWebpage | Module element webpage
C06: Extrusion. Injection Moulding. Resin Transfer Moulding (RTM) (9items)
Extrusion and Injection MouldingWebpage | Module element webpage
Resin transfer moulding (RTM)Webpage | Module element webpage
Resin transfer molding - Benjamin, William P., Beckwith, Scott W., 1999.Book
Resin transfer moulding for aerospace structures - Kruckenberg, Teresa M., Paton, Rowan.,1998.
Book
Liquid composite molding - Parnas, Richard S., 2000.Book
Resin transfer moulding - Potter, Kevin., 1997.Book
Liquid moulding technology : resin transfer moulding, structural reation injection mouldingand related composites processing techniques - Rudd, C. D., 1996.
Book
GW Critchlow et al - A review and comparative study of release coatings for optimisedabhesion in resin transfer moulding applications, International Journal of Adhesion andAdhesives, 2006, 26(8), 577�599.
Article | Elsevier ScienceDirect
Luc Dormieux, D Kondo and F-J Ulm - Microporomechanics, Wiley, 2006. ISBN0-470-03188-3.
Webpage | Purchase for Library stock requested
C07: Resin infusion under flexible tooling (RIFT) (6 items)
Resin infusion under flexible tooling (RIFT)Webpage | Module element webpage
S Moy and D Lillistone - Strengthening cast iron using FRP composites, Structures andBuildings, December 2006, 159(SB6), 309-318.
Webpage | E-resource
J Summerscales and TJ Searle, Review: Low pressure (vacuum infusion) techniques for
moulding large composite structures, Proc IMechE Part L: Journal of Materials: Design andApplications, February 2005, L219(1), 45-58.
Article | Business Source
D Cripps, T J Searle and J Summerscales, Open Mould Techniques for ThermosetComposites, In Comprehensive Composite Materials Encyclopædia, volume 2,ElsevierScience, Oxford, July 2000, Chapter 21, pp 737-761. ISBN 0-08-043725-7.
Webpage | PlymNet access only
CD Williams, SM Grove and J Summerscales, The compression response of fibre-reinforcedplastic plates during manufacture by the resin infusion under flexible tooling method,Composites, 1998, A29(1/2), 111-114.
Article | Elsevier ScienceDirect
C Williams, J Summerscales and S Grove - Resin Infusion under Flexible Tooling (RIFT): areview, Composites Part A: Applied Science and Manufacturing, 1996, A27(7), 517-524.
Smart autoclave cure of composites - Ciriscioli, Peter R., Springer, George S., 1990.Book
Successful composite techniques : a practical introduction to the use of modern compositematerials - Noakes, Keith., 1999.
Book
Competition car composites : a practical handbook - McBeath, Simon., 2000.Book
GC Newell, RO Buckingham and K Khodabandehloo - The automated manufacture ofprepreg broadgoods components - a review of literature, Composites Part A: AppliedScience and Manufacturing, 1996, 27(3), 211-217.
Article | Elsevier ScienceDirect
A Guide to Modeling Thermoplastic Composite Manufacturing Processes: optimizingprocess variables and tooling design using finite element analysis - C Lyman, AS Milani,2014-09-01
Filament winding composite structure fabrication - Peters, S. T., Humphrey, W. D., Foral, R.F., 1991.
Book
VV Vasiliev, VA Barynin and AF Rasin, Anisogrid lattice structures � survey of developmentand application,Composite Structures, November-December 2001, 54(2-3), 361-370.
Article | Elsevier ScienceDirect
C9d: pultrusion (4 items)
PultrusionWebpage | Module element webpage
Handbook of pultrusion technology - Meyer, Raymond W.,, 1985.Book
Pultrusion for engineers - Starr, Trevor F., 2000.Book
JT Mottram and Y Zheng - State-of-the-art review on the design of beam-to-columnconnections for pultruded frames, Composite Structures, 1996, 35(4), 387-401.
Article | Elsevier ScienceDirect
C10: Machining, bonding and repair (16 items)
Machining, bonding and repairWebpage | Module element webpage
Adhesives and bonded structuresWebpage | Materials selection and characterisation module page
Care and repair of advanced composites - Armstrong, Keith B., Barrett, Richard T., 1998.Book
Advances in the bonded composite repair of metallic aircraft structure - Baker, A. A., Jones,
JR Weitzenbock and D McGeorge - BONDSHIP Project Guidelines: CODE, Det Norske Veritastechnical report 2004-0134 revision 2, 2005. ISBN 82-515-0305-1.
Webpage | General requirements to ensure the reliability and safety of load-carryingbonded joints in ships
TJ Ahmed, D Stavrov, HEN Bersee and A Beukers - Induction welding of thermoplasticcomposites - an overview, Composites Part A: Applied Science and Manufacturing, 2006,A37(10), 1638-1651.
Article | Elsevier ScienceDirect
S Basavarajappa, G Chandramohan, KVN Rao, R Radhakrishanan and V Krishnaraj -Turning of particulate metal matrix composites - review and discussion, Proc IMechE PartB: Journal of Engineering Manufacture, 2006, 220(7), 1189-1204.
Webpage | Business Source
D Stavrov and HEN Bersee - Resistance welding of thermoplastic composites - anoverview, Composites Part A: Applied Science and Manufacturing, 2005, A36(1), 39-54.
Article | Elsevier ScienceDirect
S Gordon and MT Hillery - A review of the cutting of composite materials, Proceedings ofthe Institution of Mechanical Engineers - Part L: Journal of Materials: Design & Applications,2003, 217(1), 35-45.
Article | Business Source
C Ageorges, L Ye and M Hou - Advances in fusion bonding techniques for joiningthermoplastic matrix composites: a review, Composites Part A: Applied Science andManufacturing, 2001, 32(6), 839-857.
Article | Elsevier ScienceDirect
PP Camanho and FL Matthews - Stress analysis and strength prediction of mechanicallyfastened joints in FRP: a review, Composites Part A: Applied Science and Manufacturing,1997, 28(6), 529-547.
Article | Elsevier ScienceDirect
JT Mottram and Y Zheng - State-of-the-art review on the design of beam-to-columnconnections for pultruded frames, Composite Structures, 1996, 35(4), 387-401.
Article | Elsevier ScienceDirect
FL Matthews, PF Kilty and EW Godwin - A review of the strength of joints in fibre-reinforcedplastics. Part 2. Adhesively bonded joints, Composites, 1980, 13(1), 29-37.
Article | Elsevier ScienceDirect
EW Godwin and FL Matthews - A review of the strength of joints in fibre-reinforced plastics: Part 1. Mechanically fastened joints, Composites, 1980, 11(3), 155-160.
Article | Elsevier ScienceDirect
BONDSHIP: Recommended Practices, Det Norske Veritas technical report 2004-0193revision 2, 2005.
Webpage | Purchase for Library stock recommended: current link only gives Contents
KB Armstrong, G Bevan and WF Cole - Care and Repair of Advanced Composites secondedition, SAE International, Warrendale PA, 2005. ISBN 0-7680-1062-4.
Webpage | Purchase for Library stock requested
C11: Periodic table. Electron configuration of carbon atoms andmolecules (1 items)
Periodic table. Electron configuration of carbon atoms and moleculesWebpage | Module element webpage
C12: Molecular shapes and morphology of polymer molecules (2 items)
Molecular shapes and morphology of polymer moleculesWebpage | Module element webpage
RA Pethrick: Polymer Structure Characterization: from nano to macro organization, RSCPublishing, 2007. ISBN: 978-0-85404-466-5.
Webpage | Purchase for Library Stock Requested
C13: Thermoplastic polymers (8 items)
Thermoplastic polymersWebpage | Module element webpage
Leif A Carlsson - Thermoplastic Composite Materials, Elsevier, 1991. ISBN 0-444-88118-2.Webpage | Elsevier Composite Materials series 07 | Purchase for Library stock requested
PP Parlevliet, HEN Bersee and A Beukers - Residual stresses in thermoplastic composites -a study of the literature, Part I: Formation of residual stresses,Composites Part A: AppliedScience and Manufacturing, 2006, 37(11), 1847-1857.
Article | Elsevier ScienceDirect
Gert Strobl, Crystallization and melting of bulk polymers: New observations, conclusionsand a thermodynamic scheme, Progress in Polymer Science, 2006, 31(4), 398-442.
Article | Elsevier ScienceDirect
SP Nalawade, F Picchioni and LPBM Janssen - Supercritical carbon dioxide as a greensolvent for processing polymer melts: Processing aspects and applications, Progress inPolymer Science, 2006, 31(1), 19-43.
Article | Elsevier ScienceDirect
Andrzej Galeski - Strength and toughness of crystalline polymer systems, Progress inPolymer Science, 2003, 28(12), 1643-1699.
Article | Elsevier ScienceDirect
ML Di Lorenzo and C Silvestre - Non-isothermal crystallization of polymers, Progress inPolymer Science, 1999, 24(6), 917-950.
Electron Beam Curing of Composites - NetComposites - Wolff-Fabris, F., Alstadt, V., Arnold,U., Doring, M. , 2010
Book | Optional
Applications by sector (48 items)
Aerospace (3 items)
Supportability of composite airframes - Demuts, E., Marshall, I. H., United States., PaisleyCollege of Technology., Workshop on Supportability of Composite Airframes, 1988.
Document
Composite materials in aerospace design - Zaga�inov, G. I., Lozino-Lozinsky, G. E., 1996.Book
Flake Campbell - Manufacturing Technology for Aerospace Structural Materials, Elsevier,2006. ISBN 1-85617-495-6.
Article | Purchase for Library stock requested
Biomedical applications (4 items)
Foresight Biomaterials Taskforce - Priority topics for future biomaterials development,Institute of Materials, Minerals and Mining report FMP/03/01/IOM3, 2003.
Webpage
K Fujihara, K Teo, R Gopal, PL Loh, VK Ganesh, S Ramakrishna, KWC Foong and CL Chew -Fibrous composite materials in dentistry and orthopaedics: review and applications,Composites Science and Technology, 2004, 64(6), 775-788.
Article | Elsevier ScienceDirect
JF Mano et al, Bioinert, biodegradable and injectable polymeric matrix composites for hardtissue replacement: state of the art and recent developments, Composites Science andTechnology, 2004, 64(6), 789-817.
Article | Elsevier ScienceDirect
S Ramakrishna, J Mayer, E Wintermantel and KW Leong - Biomedical applications ofpolymer-composite materials: a review, Composites Science and Technology, 2001, 61(9),1189-1224.
Article | Elsevier ScienceDirect
Construction industry (22 items)
Effective use of fibre reinforced polymer materials in construction - Halliwell, S. M.,Reynolds, T., 2004.
Advanced polymer composites and polymers in the civil infrastructure - Hollaway, L., Head,P. R., 2001.
Book
Polymer composites in construction - Halliwell, S. M., 2000.Book
Advanced polymer composites in construction - Halliwell, S. M., Building ResearchEstablishment,, 1999.
Book
Strengthening of reinforced concrete structures : using externally-bonded FRP compositesin structural and civil engineering - Hollaway, L., Leeming, M. B., 1999.
Book
Interim guidance on the design of reinforced concrete structures using fibre compositereinforcement - Institution of Structural Engineers (Great Britain), 1999.
Book
Polymer composites for civil and structural engineering - Hollaway, L., 1993.Book
Polymers and polymer composites in construction - Hollaway, L., 1990.Book
Glass reinforced plastics in construction : engineering aspects - Hollaway, L., 1978.Book
Journal of Composites for Construction (e-journal)Article | Business Source
D Richard, T Hong, M Hastak, A Mirmiran and O Salem - Life-cycle performance model forcomposites in construction, Composites Part B: Engineering, 2007, 38(2), 236-246.
Article | Elsevier ScienceDirect
S Moy and D Lillistone - Strengthening cast iron using FRP composites, Structures andBuildings, December 2006, 159(SB6), 309-318.
Webpage | E-resource
C Mota, S Alminar and D Svecova - Critical review of deflection formulas for FRP-RCmembers, Journal of Composites for Construction, 2006, 10(3), 183-194.
Article | Business Source
CE Bakis et al - Fiber-reinforced polymer composites for construction - state-of-the-artreview, Journal of Composites for Construction, 2002, 6(2), p73-87.
Article | Business Source
MG Iskander and M Hassan - State of the practice review in FRP composite piling, Journalof Composites for Construction, 1998, 2(3), 116-120.
Article | Business Source
Structures strengthened with bonded composites - Wu, Zhishen
Book | Publication delayed to at least August 2007 - reorder in Summer 2007
Strengthening Concrete Structures with Fibre Composite Materials: acceptance, inspectionand monitoring, Concrete Society TR57, 2003.
Webpage | Purchase for Library stock requested
Design Guidance for Strengthening Concrete Structures using Fibre Composite Materials -2nd Edition, Concrete Society TR55, November 2004
Webpage | Purchase for Library stock requested
Composites for construction : structural design with FRP materials - Bank, Lawrence Colin,,2006.
Book
V M Karbhari - Durability of composites for civil structural applications, WoodheadPublishing, Cambridge, 2007. ISBN-13: 978-1-84569-035-9.
Webpage | Purchase for Library Stock Requested
P Balaguru, A Nanni and J Giancaspro, FRP Composites for Reinforced and PrestressedConcrete Structures: a guide to fundamentals and design for repair and retrofit, Taylor andFrancis, 2008. ISBN-13: 978-0-415-44854-3.
Article | Purchase for Library Stock Requested
L C Hollaway and J G Teng - Strengthening and rehabilitation of civil infrastructures usingfibre-reinforced polymer (FRP) composites, Woodhead Publishing, Cambridge, 2008.ISBN-13: 978-1-84569-448-7.
Webpage | Purchase for Library Stock Requested
Marine (5 items)
MATS231: Composite Materials and Structures for the Marine EnvironmentWebpage | Course module webpage
Marine applications of advanced fibre-reinforced composites - 2016Book
AP Mouritz, E Gellert, P Burchill and K Challis, Review of advanced composite structures fornaval ships and submarines , Composite Structures, 2001, 53(1), 21-42.
Article | Elsevier ScienceDirect
Marine composites - Eric Greene Associates,, 1999.Book
Design of marine structures in composite materials - Smith, C. S., 1990.Book
Composites Part A: Applied Science and Manufacturing, 2006, 37(11), 1847-1857.Article | Elsevier ScienceDirect
KL Goh, RM Aspden and DWL Hukins, Review: finite element analysis of stress transfer inshort-fibre composite materials, Composites Science and Technology, 2004, 64(9),1091-1100.
Article | Elsevier ScienceDirect
Z Zhang and K Friedrich - Artificial neural networks applied to polymer composites: areview, Composites Science and Technology, 2003, 63(14), 2029-2044.
Article | Elsevier ScienceDirect
LS Sutherland, RA Shenoi and SM Lewis - Size and scale effects in composites, CompositesScience and Technology, 1999, 59(2), 209-220.
Article | Elsevier ScienceDirect
M Akiba and AS Hashim - Vulcanization and crosslinking in elastomers, Progress in PolymerScience, 1997, 22(3), 475-521
Article | Elsevier ScienceDirect
C Decker - Photoinitiated crosslinking polymerisation, Progress in Polymer Science, 1996,21(4), 593-650.
Article | Elsevier ScienceDirect
Thermal properties, thermal analysis and cryogenics (4 items)
Okimichi Yano and Hitoshi Yamaoka - Cryogenic properties of polymers, Progress inPolymer Science, 1995, 20(4), 585-613.
Article | Elsevier ScienceDirect
MB Kasen, Mechanical and thermal properties of filamentary-reinforced structuralcomposites at cryogenic temperatures 1: glass-reinforced composites, Cryogenics, 1975,15(6), 327-349.
Article | Elsevier ScienceDirect
MB Kasen, Mechanical and thermal properties of filamentary-reinforced structuralcomposites at cryogenic temperatures 2: advanced composites, Cryogenics, 1975, 15(12),701-722.
Tribology: friction, lubrication and wear (4 items)
Friction and wear of polymer composites - Friedrich, Klaus,, 1986.Book | Elsevier Composite Materials series 01
K Friedrich - Advances in Composite Tribology, Elsvier, 1993. ISBN 0-444-89079-3.Webpage | Elsevier Composite Materials series 08 | Purchase for Library stock requested
K Friedrich, Z Zhang and AK Schlarb - Effects of various fillers on the sliding wear ofpolymer composites, Composites Science and Technology, 2005, 65(15-16), 2329-2343 .
Article | Elsevier ScienceDirect
N Chand and M Fahim - Tribology of natural fiber polymer composites, WoodheadPublishing, Cambridge, 2008. ISBN-13: 978-1-84569-393-0.
Webpage
Wind Energy: implications of large-scale deployment on the GB electricity system - JTrewby et al