Materials Science & Technology Conference M M a a t t e e r r i i a a l l s s S S c c i i e e n n c c e e & & T T e e c c h h n n o o l l o o g g y y C C o o n n f f e e r r e e n n c c e e a a n n d d E E x x h h i i b b i i t t i i o o n n MS&T’07 “Exploring Structure, Processing, and Applications Across Multiple Materials Systems” September 16-20, 2007 Detroit, Michigan, USA Volume 1 of 6 Printed from e-media with permission by: Curran Associates, Inc. 57 Morehouse Lane Red Hook, NY 12571 www.proceedings.com ISBN: 978-1-60560-133-5 Some format issues inherent in the e-media version may also appear in this print version.
23
Embed
Materials Science & Technology Conference and Exhibitiontoc.proceedings.com/02732webtoc.pdfMaterials Science & Technology Conference Materials Science & Technology Conference and Exhibition
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Materials Science & Technology Conference and Exhibition
2007
TABLE OF CONTENTS
Volume 1
AUTOMOTIVE Microstructural Evolution During Continuous Galvanizing and Final Mechanical Properties of High Al-Low Si TRIP Steels......................................................................................... 1
M. Gomez, C. Garcia, A. DeArdo, D. Haezebrouck
Applications of Niobium to Automotive Ultra High-Strength TRIP-Aided Steels with Bainitic Ferrite and/or Martensite Matrix ................................................................................ 15
K.-I. Sugimoto, M. Murata
Dynamic Behavior of TRIP and DP Steels in Tension at Different Temperatures...................... 27S. Curtze, M. Hokka, V.-T. Kuokkala, P. Peura
Functional Improvement of Automotive High Strength Steel Grades by Niobium Microalloying ..................................................................................................................................... 37
H. Mohrbacher
Effect of Overaging on the Properties of Dual Phase Steel during Continuous Annealing ........................................................................................................................................... 49
X. Tao, S. Birosca, H.S. Kim, B.C. De Cooman
Microstructural Evolution in a Complex-Phase Steel ................................................................... 61S. Sarkar, M. Militzer, W.J. Poole, F. Fazeli
Dilatometric Study of the Quench and Partitioning (Q&P) Process ............................................ 73S.J. Kim, Han S. Kim, B.C. De Cooman
Effect of Aluminum Content on the Mechanical Properties of Dual Stabilized Ti-Nb Interstitial Free High Strength Steel (IF-HSS)................................................................................. 84
H. Kang, C.I. Garcia, K. Chin, A.J DeArdo
Critical Review of Hot Stamping Technology for Automotive Steels.......................................... 98D.W. Fan, H.S. Kim, S. Birosca, B.C. De Cooman
High Strength Air-Hardening Steels for Automotive Applications ............................................ 110U. Diekmann, C.-M. Rogall, T. Saeuberlich, A. Frehn
Characterization of Nano-Sized Precipitates in Microalloyed Steels ........................................ 122J. Lu, H. Henein, D.G. Ivey
Metallurgical Aspects Regarding the Stretching Edge of Advance High Strength Steel.................................................................................................................................................. 134
C. Chiriac
The Susceptiblity to Shear Fracture in Bending of Advanced High Strength Sheet Steels................................................................................................................................................ 143
A. Hudgins, D. Matlock, J. Speer, J. Fekete, M. Walp
Influence of the Edge Conditons on the Hole Expansion Property of Dual-Phase and Complex-Phase Steels ............................................................................................................ 156
A. Karelova, C. Krempaszky, E. Werner, T. Hebesberger, A. Pichler
Influence of the Shear Cutting Process on Damage in Laboratory Dual Phase Steels Developed for automotive Application ............................................................................. 167
A. Dalloz, A.-F. Gourgues, A. Pineau, J. Besson, T. Sturel
Some Aspects of Thermo-Mechanical Properties of High Mn TWIP Steels Investigated by In-Situ Infrared Thermography ........................................................................... 178
L. Chen, S. Birosca, Han S. Kim, S.K. Kim, B.C. De Cooman
Modeling and Characterization of High Frequency Induction Welds in Advanced High Strength Steels....................................................................................................................... 189
Y. Adonyi, V. Jurko, A. Lesko
Sources of Variability in the Fatigue Strength of Spot Welded Specimens ............................. 201H. Kang, J.J.F. Bonnen, R.M. Iyengar
Multibody Joining: A New Method for Spot Joining of Sheet Materials ................................... 220M.P. Miles, K. Kohkonen, B. Siemssen, R. Steel, S. Packer, Y.S. Sato
Tool Steel Selection for Cold Forming of High Strength Steels Based on the Stress Distribution in Tools ........................................................................................................... 228
R. Hernandez, M.D. Riera, D. Casellas, I. Valls, B. Casas, J.M. Prado
Formation of Ceramic Layer on Steel Strips by Combined Method of Cladding and PEO ........................................................................................................................................... 237
H.S. Dehghanian, M.H. Shariat, A. Deghan, H. Daneshmanesh
Development and Use of Polyamide 6 for Automotive Safety Restraint System Components .................................................................................................................................... 245
M. Huisman, N. Bokhari
Optimization of Engergy Saving Materials and Compressed Insulating Layers in the Automotive Chemical Converters........................................................................................... 252
E. Litovsky, V. Issoupov, J. Kleiman, R. Latham, F. Lacin, A. Kotrba, K. Olivier
Study of Intrusion Bending for Steel Tubes with Thin Wall Thickness..................................... 263H. Naoi, N. Kitakami, M. Mizumura, Y. Kuriyama
Function-Oriented Design of Inoovative Composite Materials for High Speed Impact........... 275H. Wang, Y. Cui, Z.-D. Ma, D. Rose
Texture Variation in a Heat Treated Heavily Deformed Aluminum Alloy 6061 ......................... 287S. Adedokun, J. Schwartz, H. Garmestani
Review of Motor Vehicle Ap-lications for Functional Thermal Spray Coatings ....................... 293R. Betts
Development of Thin Film Coatings for Dies Used in Aluminum Pressure Die-Casting of Automotive Components............................................................................................. 303
J. Lin, B. Mishra, S. Myers, S. Bhattacharyya, J.J. Moore, P. Ried
Effects of Refractory Coatings on the Performance of a Chemically Bonded Sand System at Elevated Temperatures ................................................................................................ 315
S. Ramrattan, A. Abdelwahab
Effect of Applied Isostatic Pressure during Solidification on Static Mechanical Properties of Lost Foam Aluminum Castings.............................................................................. 322
P. Chitalapati, J. Griffin, R. Griffin, H. Littleton
Studies on the Surface Oxidation of Molten Aluminium - Silicon Alloys Using Laser as a Probe ............................................................................................................................. 334
K. R. Udupa, S. Chatterjee
Visualization of the Muliphase Flow in the Lost Foam Casting Process by Neutron Radiography and Image Processing............................................................................................. 347
X. Luo, D. Penumadu
Establishment of Nucleation Model and Microstructure Simulation of Al-Si Alloy for Low Pressure Die Casting ........................................................................................................ 355
B. Li, Q.Y. Zu, B.C. Liu
Simulation of Microporosity in Aluminum Castings by Coupling Hydrogen Diffusion with Interdendritic Feeding ........................................................................................... 365
G.P. Backer, Q. Wang
Mold Filling Simulations for the Semi Solid Metal Manufacturing Process.............................. 376G.P. Backer
Study of Microstructure and Mechanical Properties of Continuously Cast AA6111 Strips Following Horizontal Single Belt Casting (HSBC), Rolling and Heat Treatment ......................................................................................................................................... 386
D. Li, M. Isac, R.I.L. Guthrie
The Role of High Pressure Die Casting in the Expanded Use of Aluminum and Magnesium for Automotive Applications ..................................................................................... 395
J. Yurko
Microstructural Examination of Directionally Solidified Mg Alloys Confirming Mg-Rich Phase Equilibria of Mg-Al-Ca ................................................................................................ 408
H. Cao, C. Zhang, J. Zhu, G. Cao, S. Kou, Y.A. Chang
Characterization of Combinatorially Prepared Mixed-Phase Magnesium-Aluminum Thin Film Alloys............................................................................................................ 420
C.H. Olk, D.B. Haddad
The Effect of Hydrogen Level, Sr Additions, and Grain Refinement on the Spatial Distribution of Porosity in 319-Type Alloy Castings ................................................................... 429
J. Zindel, L. Godlewski
Regarding Influences of Production Processes on Material Parameters in Fatigue Life Prediciton (Dendrite Arm Spacing, Boundary Layer Model)............................................... 440
M. Meise, W. Aichberger, H. Riener, H. Dannbauer
Refinement of Eutectic Grains/Cells in Near-Eutectic Al-Si Alloys ........................................... 451H. Liao, M. Zhang, H. Wang, G. Dong, G. Sun
Influence of In Situ TIB2 Particles on the Microstructural, Mechanical, and Abrasive Wear Behavior of A356 Alloy......................................................................................... 465
S. Kumar, V.S. Sarma, B.S. Murty
Development and Testing of Chilled Aluminum Alloy-Corundum Particulate Composite for Automotive Applications ...................................................................................... 472
K.S. Shekar, J. Hemanth
Effects of Metal Hydride Properties on the Performance of Hydrogen Storage Systems ...... 484T. Johnson, D. Dedrick, S. Jorgensen
Changes in the Mechanical Properties of Galvanized TRIP Steels ........................................... 505E.J. Petit, B. Bolle, M. Gilles, I. J. Gilgert, Z. Azari
Processing of TRIP Steels in Continuous Galvanizing Lines: Surface and Subsurface Oxidation Study .......................................................................................................... 514
Y.F. Gong, S. Birosca, H.S. Kim, B.C. De Cooman
Effect of Continuous Galvanizing Heat Treatments on the Microstructure and Mechanical Properties of Al-Si TRIP Steels ................................................................................. 525
E.M. Bellhouse, J.R. McDermid
Properties of Galvanized and Galvannealed High Strength Hot Rolled Steel .......................... 535R. Fourmentin, J.R. McDermid, V. Gertsman, S. Dionne, F. Goodwin
Characterizing Reactive Wetting Kinetics of High-Mn Dual-Phase Steels in Hot-Dip Galvanizing Baths .................................................................................................................... 547
R.J. Meguerian, J.R. McDermid
ALEUTEC, a New Zinc Coating for Steel ...................................................................................... 556W. van Ooij, J. Zervoudis, G. Poag
Mechanism and Growth of Dross on the Submerged Pot Hardware in Galvalume (GL) Bath .......................................................................................................................................... 568
A. Varadarajan, B.S.-J. Kang
XRF as a Method for Measuring Coat Weight Thickness of Various Conversion Coatings on Steel or Aluminum .................................................................................................... 576
S. Fess
ELECTRONIC AND MAGNETIC PROPERTIES Fabrication of Thick Hard Magnetic Coatings by thermal Spray Technologies....................... 589
B. Dzur, C. Zimmer, G. Thomas
Dielectric Studies on Ferroelectromagnetic SrBi5-xLaxFeTi4O18 ................................................. 595S.V. Suryanarayana, E. Venkata ramana, T.B. Sankaram
Integrated Technology of Decoupling BST Thin Film Capacitors ............................................. 605N. Kamehara, K. Kurihara
Structural and Electrical Properties of 0.38Bi(GaxSc1-x)O3 - 0.62PBTiO3 Piezoelectric Ceramics ................................................................................................................... 612
Y. Jiang, C. Du, B. Qin, Y. Chen, X. Yue, D. Xiao, J. Zhu
Lead-Free Sodium Potassium Niobate Piezoelectric Ceramics and Middle Frequency Resonator ..................................................................................................................... 622
Q. Chen, L. Chen, Q. Li, D. Xiao, J. Zhu
Dielectric Properties of Sr2+ and Sn4+ Co-substitued BaTiO3-Based Solid Solution Ceramics .......................................................................................................................................... 629
S.N Yun, X.L. Wang, D.L.Xu, H. Li
Pb(Zr0.52Ti0.48)O3 Films Grown on Nickel Substrate by Pulsed Laser Deposition ..................... 638Y.H. Yu, M.O. Lai, L. Lu
Non-Lead Based Ceramic Film Processing by Laser Transfer for Improved Integration and System-in-Package .............................................................................................. 647
T. Chakraborty, R.E. Miles, S.J. Milne
Effect of Ca Substitution on the Microwave Properties and Lattice Vibration of Ba(Mg1/3Ta2/3)O3 Ceramics .............................................................................................................. 656
T. Shimada
Metal-Oxide Nanoparticle Gas Sensor Arrays ............................................................................. 668E. Beach, M. Andio, P.A. Morris, S. Stewart
Characterization of CeO2/Al2O3 Nano Composites for SOFC Applications .............................. 680R. Chockalingam, H. Giesche, V.R.W. Amarakoon
Volume 2
Controlled Designing of Fine Particles at Molecular and Nano Levels ..................................... 691
D. Uskokovic
Novel Class of Capacitor Materials ............................................................................................... 703G.D. Singh
Growth, Characterization and Transport Properties of PbxZn1-xS Mixed Crystals................... 708B. Rajam, E. Nagabushan, M. Nanabhushanam, K. Yadaiah
Effect of Acceptor (Mg) Concentration on the Electrical Resistance at Room and High (200 C) Temperatures of Acceptor (Mg)-Doped BaTiO3 Ceramics.................................... 723
S.-H. Yoon, M.-H. Hong, J.-O. Hong, Y.-T. Kim, K.-H. Hur
Temperature- and Stress-Dependent Scaling of Ferroelectric Hysteresis in Soft and Hard PZT Bulk Ceramics......................................................................................................... 735
R. Yimnirun, S. Wongsaenmai, R. Wongmaneerung, M. Un ruan, N. Wongdamnern, A. Ngamjarurojana, Y. Laosiritaworn, S. Ananta
Optimization of Dry Powder Deposition Parameters for the Production of Dielectric and Magneto-Dielectric Composites ........................................................................... 754
S. Nergiz, G. Kizilta
Dielectric Characterization of M and W-Type Barium Hexaferrite Prepared by Multiple Sintering Techniques ....................................................................................................... 767
P. Shepherd, I. Harrison, K.K. Mallick
Fabrication of Photonic Assemblies for High-Gain Antennas ................................................... 779G. Mumcu, S. Yarga, K. Sertel, J.L. Volakis
Thermoelectric Power, Dielectric and Magnetic Properties of Sr-La M-Type Hexagonal Ferrites.......................................................................................................................... 787
A. Singh, K. Singh, S.B. Narang, D. Ravinder, R.K. Kotnala
BaTiO3 Thin Films on Metallic Substrates: Fabrication, Microstructure and Property ........................................................................................................................................... 801
J.C. Jiang, Z. Yuan, J. Lie, J. Weaver, C.L. Chen, B. Lin, V. Giurgiutiu, R.Y. Guo, A. Bhalla
Microstructure and Dielectric Properties of Barium Strontium Titanate Derived by Sol-Gel.............................................................................................................................................. 811
H. Manuspiya, G. Panomsuwan, H. Ishida, A. Bhalla
A Two-Stage Solid-State Reaction to Lead Nickel Niobate Powders ........................................ 827O. Khamman, R. Yimnirun, S. Ananta
Synthesis and Characterization of Magneto-Dielectric Composites for Radio Frequency Applications ................................................................................................................. 838
S. Farhat, M. Hawley, L. Kempel, S. Balasubramaniam
Effect of Nb-Doping on Electrical Properties of Pb(Zr0.52Ti0.48)O3 Ceramics ............................. 845P. Ketsuwan, Y. Laosiritaworn, S. Ananta, R. Yimnirun, D.P. Cann
A-Site Substitution Controlled Dielectric Dispersion in Lead Free Sodium Bismuth Titanate ............................................................................................................................. 854
S.V. Suryanarayana, M. Raghavender, G. Prasad, T. Bhimasankaram
Room Temperature Ferromagnetic Dilute Magnetic Semiconductor Zn-0.95Co0.05O ................ 870Q. Liu, C.L. Gan, G.C. Han
Interface Engineering in the High-K Dielectrics Gate Stacks..................................................... 880S.J. Wang
Strain-Enhanced Dielectric and Ferroelectric Properties of Pb(Zr0.8Ti0.2)O3/Pb(Zr0.2Ti0.8)O3 Multilayer Thin Films Without Buffer Layers ............................ 890
H. Liu, X. Gong, J. Liang, X. Li, D. Ziao, J. Zhu, Z. Pu
Porous Titania Films Prepared in Aqueous Solution.................................................................. 899Y. Masuda, T. Kimura, X. Hu, X. Meng, K. Kato, T. Ohji
Magnetic Energy Distribution in Polycrystalline Sputtered CoCr Magnetic Thin Films.......... 908J. F. Al-Sharab, J.E. Wittig, G. Bertero, T. Yamashita, J. Bentley, N. Evans
ENERGY Repassivation of Alloy 22 Crevice Corrosion at 90ºC ................................................................. 915
A.K. Mishra, G.S. Frankel
A Study of Corrosion and Stress Corrosion Cracking of Carbon Steel Nuclear Waste Stroage Tanks...................................................................................................................... 926
C. Scott, F. Gui, C.S. Brossia, J. Beavers, G. Edgemon, H. Berman, K. Boomer, G. Frankel
Electrochemical Formation of Passive Film on Carbon Steel and Its Interaction with Hydrogen Peroxide ................................................................................................................. 938
W. Xu, X. Zhang, J.C. Wren
Modelling of the Oxide Film Growth and Layer Restructuring on Stainless Steels in LWRs ............................................................................................................................................ 952
I. Betova, M. Bojinov, P. Kinnunen, T. Saario, K. Lundgren
Behaviour of NiCr Coatings under Different Environments ....................................................... 965N. Bala, H. Singh, S. Prakash
A Passive Film Formed on Alloy 600 as a Steam Generator Tubing Material .......................... 979D.-J. Kim, H.C. Kwon, S.S. Hwang, H.P. Kim
Key Elements of Characterizing Savannah River Site (SRS) High Level Waste (HLW) Sludge Insolubles through Sampling and Analysis ........................................................ 991
S. Reboul, B. Hamm, P. Hill, D. DiPrete, N. Bibler, W. Wilmarth
Physical and Chemical Measurements Nedded to Support Dispositon of Savannah River Site Radioactife High Level Wast Sludge ....................................................... 1003
B. Hamm, S. Reboul, P. Hill, N. Bibler
Development of a New Zirconoloite-Base Glass-Ceramic for Immobilization of Radioactive Wastes ...................................................................................................................... 1010
M. Mahmoudysepehr, V. Marghussian, J. Javadpour, H. Kazemian
Accelerated Weathering of Fluidized Bed Steam Reformation Material Under Hydraulically Unsaturated Conditions........................................................................................ 1018
E.M. Pierce
Process Changes to DWPF to Increase Throughput and Incorporate Salt Streams ............. 1030C. Herman, D. Peeler, T. Edwards, M. Stone, M. Smith
Investigation of LTC SS 316 as Bipolar Plate material for PEMFC Application ..................... 1042V. Nikam, T. Johns
A Micro-Indentation Method for Assessment of TBC Bond Coat Systems ............................ 1052C. Feng, M. Alvin, B.S.-J. Kang
Evaluation of Ionic Liquids as Heat Transfer Materials in Thermal Storage Systems .......... 1061M. Zhang, R.G. Reddy
A Study on the Synthesis of LiFePO4: A Potential Cathode Material for Lithium Ion Batteries .................................................................................................................................. 1071
K.E. Howard, E.J. Swedberg
Growth of Hydrous Manganese Oxides Nanowall Arrays and Their Li-Ion Intercalation Property ................................................................................................................... 1082
D.W. Liu, Q.F. Zhang, B.B. Garcia, Q. Guo, R. Champion, G.Z. Cao, P. Ziao
New Processes and Characterization of LiCoO2 Chemistries for Li-Ion Batteries ................ 1090J.F. Al-Sharab, F. Cosandey, B. Yakshinskiy, N. Pereira, F. Badway, G.G. Amatucci
Laser Doping Fabrication of Energy Conversion Devices ....................................................... 1100N.R. Quick, S. Bet, A. Kar
Effects of Thermal History on the Dielectric Properties of Nanostructured Titania .............. 1111S. Chao, V. Petrovsky, F. Dogan
Kinetics of Supercritical Water Reformation of Ethanol to Hydrogen .................................... 1121J. Wenzel, J. Picou, M. Factor, S. Lee
Mineralogical Sequestration of Carbon Dioxide through Aqueous Processing of Steelmaking Slag .......................................................................................................................... 1133
Processing, Characterization and Dielectric Properties of Hydrothermal BaTiO3 Films on Stainless Steel ............................................................................................................... 1146
S. Chao, V. Petrovsky, F. Dogan
Fabrication of NbC, ZrC and UC-Based Silicon Carbide Matrix Composites for Nucliear Applications Using Polymer Infiltration and Pyrolysis.............................................. 1159
A.K. Singh, R.P. Singh
Thermodynamic Modeling and Testing of the H2/O2/Ni/NiO System ....................................... 1168I.D. Kellogg, U.O. Koylu, V. Petrovsky, F. Dogan
The Properties and Performance of Micro-Tubular (Less than 1mm OD) Anode Supported Solid Oxide Fuel Cells ............................................................................................... 1175
N. Sammes, A. Smirnova, A. Mohammadi, F. Serincan, Z. Xiaoyu, J. Pusz, M. Awano, T. Suzuki, T. Yamaguchi, Y. Fujishiro, Y. Funahashi
Effect of Fuel Conditions on Performance of Novel PEMFC Flow Field Design .................... 1188V.V. Nikam, R.G. Reddy
Candidate Alloys for Cost-Effective, High-Efficiency, High-Temperature Compact/Foul Heat-Exchangers.................................................................................................. 1197
N. Evans, P. Maziasz, J. Shingledecker, B. Pint, Y. Yamamoto
Development of Candidate Silver Cermet Contact Materials for Cathode Side in Solid Oxide Fuel Cell .................................................................................................................... 1209
T.-B. Sheppard, B.S.-J. Kang
Corrosion of Metallic SOFC Interconnects in Coal Syngas...................................................... 1218R.R. Dastane, X. Liu, C. Johnson, S. Mao
The Application of Protective Coatings on Crofer 22 APU....................................................... 1231M.R. Bateni, P. Wei, A. Petric
Electrodeposition of Mn-Co Alloys on Stainless Steels for SOFC Interconnect Application..................................................................................................................................... 1241
J. Wu, Y. Jiang, C. Johnson, M. Gong, X. Liu
The Formation of Alumina Coating on Ferritic Steels............................................................... 1252M. R. Bateni, L. Quintero, A. Petric
La0.67Sr 0.33MnO3 Coating on SOFC Interconnect by Plasma-Sputtering ........................... 1261C.-L. Chu, Y.-N. Cheng, S. Lee
Glass-Ceramic Seal Stability Study for Solid Oxide Electrolyzer/Fuel Cells .......................... 1268M.K. Mahapatra, C. Story, K. Lu, W.T. Reynolds
The Application of a Novel Ni-Cr-Si Coating on Fe-9Cr Steel for SOFC Interconnects................................................................................................................................. 1278
Investigation of Temperature and Strain Rate Effects on Material Flow Curve and Microstructure of Aluminum Sheet Metal Alloys ....................................................................... 1302
S. Mahabunphachai, Y. Usta, M. Koc
Micromechanical Modelling of the Formability of Dual-Phase Steels ..................................... 1318C. Krempaszky, J. Ocenasek, V. Espinoza, E. Werner, T. Hebesberger, A. Pichler
Prediction of Springback for a Channel Draw Process Using Different Hardening Models ............................................................................................................................................ 1331
A. Taherizadeh, A. Ghaei, D.E. Green
Microstructures for Large Elongations in Superplastic Aluminum Materials ........................ 1342H. Hosokawa, K. Higashi
Modeling the Influence of Grain-Level Matrix Inhomogeneity on Strain Localization in the Presence of Hard Particles .......................................................................... 1354
X. Hu, D.S. Wilkinson, M. Jain, R.K. Mishra
Stress Response of Advanced High Strength Steels using Tapered Tensile Speciments and Digital Image Correlation Method ................................................................... 1369
J. Mullins, P. Hodgson, T. Hilditch
Volume 3
Tensile Response of Titanium at Reasonable High Strain Rates and Temperatures ............ 1383
M.F. Quinlan, P. Phelan
A Simple Indentation Measurement Technique for Surface Mechanical Property Evaluation ...................................................................................................................................... 1394
C. Feng, B.S.-J. Kang
A Study of Aging Effects on Hardness and Tensile Properties of 2219 Aluminum Alloy................................................................................................................................................ 1402
I. Jabeen, R. Ahmad
The Minimum Coefficient of Friction Obtained by MATROLL Software and the Effect of Improper Friction during the Cold Rolling of Steel.................................................... 1412
H. Abdollahi, K. Dehghani
Dislocation Absorption in an Asymmetric Tilt Boundary ......................................................... 1422J. Askin, P. Anderson, R. Hoagland
A New Method for Simulating Strongly Anisotropic Cahn-Hilliard Equations ....................... 1432S. Torabi, S. Wise, J. Lowengrub, A. Rätz, A. Voigt
Wavelet-Based Local Region-of-Interest Reconstruction for Synchrotron Radiation X-ray Microtomography .............................................................................................. 1445
L. Li, H. Toda, T. Ohgaki, M. Kobayashi, K. Uesugi, Y. Suzuki
Finite Element Analysis of PMMA Reinforced Osteoporotic Femurs...................................... 1457M.N. Shaw, M.E. Bolander, K.E. Bennet, S. McEligot, M.J. Burke, J.T. Bronk, D.M. Dragomir-Daescu
Formation of Biomimetic Porous Calcium Phosphate Coatings on Surfaces of Polyethylene/Zinc Stearate Blends ............................................................................................. 1468
J. Drelich, K.G. Field
Tensile Deformation Behavior of Epoxy Composites Reinforced With Three Different Woven Fabrics............................................................................................................... 1480
A.A. Mazen, M.A. Metwali, N.A. El-Mahallawy
Bond Breaking and the Fracture Process .................................................................................. 1496J.K. West
Mechanical Properties and Microstructure of AlFeSiV-SiC Particulate Composite .............. 1511M. Arhami, F. Sarioglu, A. Kalkanli, M. Hashemipour
Thermo-Mechanical Fatigue Analysis of Cast Aluminum Cylinder Heads ............................. 1519C.C. Engler-Pinto, X. Su, J.V. Lasecki, X. Chen, J.E. Allison
Impact of Additional gamma' Strengthening on the Strength and Fatigue Behavior of Oxide Dispersion Strengthened Ni-Base Superalloys.......................................................... 1531
M. Nganbe, M. Heilmaier, M. Schaper
A Quantized Crystal Plasticity Finite Element Model on Stress-Strain Response of Nanocrystalline Metals ................................................................................................................. 1542
L. Li, M.G. Lee, P.M. Anderson, E. Bitzek, P.M. Derlet, H. Van Swygenhoven
Quantitative Prediction of Void Formation in Growing Magnetite Scal Formed on Iron at 823 K................................................................................................................................... 1556
M. Ueda, T. Maruyama
Anomalous Diffusion in Superionic Solids ................................................................................ 1567T. Ishii
Modification of Crystal Lattice by Impurity Ordering in Gallium Phosphide.......................... 1580S. Pyshkin, R. Zhitaru, J. Ballato
Atomic Diffusion Behaviour of BF2+ and Boron Implant p+n Junction with Thermal
Budget: A Simulation/Analytical Approach................................................................................ 1588A.K. Srivastava
FEM Analysis of Weld Distortion in HSLA-65 Steel for Naval Applications ........................... 1595J. Huang, Y. Gooroochurn
Heat Treatment of High Alloy Stainless Steel Castings............................................................ 1606J.D. Farren, J.N. DuPont
Numerical Simulation of Kinetics of the Cobalt Gradient Change in WC-Co during Liquid Phase Sintering ................................................................................................................. 1618
P. Fan, Z. Fang, P. Prichard
Finite Element Simulation of the Joining Process of Glass Feedthroughs for Medical Devices ............................................................................................................................ 1628
M. Reiterer, B. Tischendorf, J. Taylor
A Cellular Automaton Madel for Grain Growth .......................................................................... 1640S. Raghavan, S.S. Sahay
Studying Tunnel-Like Defect in Friction Stir Welding Process Using Computational Fluid Dynamics ................................................................................................... 1650
H. Atharifar, D.C. Lin, R. Kovacevic
A Numerical Study of Plasma-Particle Energy Exchange Dynamics in Induction Thermal Plasmas for Glassification ............................................................................................ 1667
M.M. Hossain, Y. Yao, T. Watanabe
Contribution to Digital Representation of Materials Subjected to Thermomechanical Processing................................................................................................... 1677
L. Madej, J. Gawad, P.D. Hodgson, M. Pietrzyk
Effect of Nozzle Port Clogging on the Behavior of Liquid Steel, Slag, and Bubble in Slab Mold ................................................................................................................................... 1689
G. Wen, P. Tang, Y. Wang, Z. Chen
Modeling of Quasicrystal Plastic Deformation of Anisotropic Metals by means of Their Macromechanical Properties ............................................................................................. 1697
S.A. Balogun, S.O. Adeosun, D.E. Esezobor
An Energy Model for Friction Stir Welding................................................................................. 1709A. El-Domiaty, H.A. El-hafez
Microstructural Simulation of Phase Decomposition in Isothermally Aged Cu-Ni Alloys.............................................................................................................................................. 1722
E. Avila-Davila, V. Lopez-Hirata, M. Saucedo-Munoz, J. Gonzalez-Velazquez
Mechanism and Kinetics of Clustering in Naturally-Aged Al-Mg-Si Alloys ............................ 1734H. Seyedrezai, H.S. Zurob
Effect of Silver on the Precipitation of Aluminum-Magnesium-Silicon Alloy ......................... 1743K. Matsuda, J. Nakamura, T. Kawabata, S. Ikeno
Effect of MnO2 Additions on the Hot Corrosion Behaviour of Some Fe-, Co-, and Ni-Base Superalloys ..................................................................................................................... 1751
H. Singh, N. Bala, S. Prakash
Diffusion Analysis of Cu-Sn System........................................................................................... 1765S. Kumar, K. Kulkarni, C. Handwerker, M. Dayananda
Studies on the Thermal Behavior of FePO4 in Air ..................................................................... 1777L. Zhang, M. Schlesinger, R. Brow
Growth Kinetics of Boride Layers on Iron-Chromium Alloys and their Dry Abrasive Wear Resistance ........................................................................................................... 1785
V.I. Dybkov, L.V. Goncharuk, V.G. Khoruzha, K.A. Melesheivich, A.V. Samelyuk, V. R. Sidorko
Phase Formation and Diffusion in Binary Systems: Real Facts and Misleading Views .............................................................................................................................................. 1797
V.I. Dybkov
Carbon Diffusion Coefficient in Complexly Alloyed Austenite ................................................ 1809A. Vasilyev
Development of Information Platform for Data Exchange between Heterogeneous Material Data Resources .............................................................................................................. 1824
T. Ashino, N. Oka
3D Surface MicroTexture/Wear Measurement and Analysis .................................................... 1835D.K. Cohen
Failure Analysis of Friction Weld (FRW) in Truck Axle Application ........................................ 1852Y. Huang, Y. Zhu
Use of Metallurgical Analysis to Pinpoint a Brake Problem and the Cause of a Bus Fire .......................................................................................................................................... 1860
R. Hargis, T. Jur
Analysis of Transport Trailer Front End Structures .................................................................. 1876R. Harris, P. Young
Failure Analysis of Automotive Suspension Coil Springs ....................................................... 1890Y. Prawoto, M. Ideda, S.K. Manville, A. Nishikawa
Critical Influence Water Component for Copper Cooling Power Generation ......................... 1911A. Reani
MATERIALS AND SYSTEMS Corrosion/Erosion Resistance of Ceramic Oxide Coatings Against CF4 + O2 Plasma............................................................................................................................................ 1917
K.H. Baik, Y.R. Lee, H.K. Seok
Revolutionary UV-Cured Nanotchnology Thin Film Coatings with Superior Barrier Properties ...................................................................................................................................... 1924
T. Krotine, S. Ramsey
Oil-Production Equipment Component Hardening with the Help of the Thermochemical Treatment ......................................................................................................... 1932
V.P. Artemyev, A.G. Sokolov, E.G. Sokolov, A.A. Chalov
Consolidation of Composite Materials by Kinetic Spray Process ........................................... 1944S.B. Zhao, B.a. Gillispie, T.Y. Han, N. Patel, S. Khalid
Structure-Property Relationship in Particle Reinforced metal-Matrix Composites Made by Low Pressure Gas Dynamic Spray .............................................................................. 1960
R.Gr. Maev, V. Leshchynsky, K.Y. Sastry
Thick Nano-Structured CVD Coating HARDIDE as Enabler for Engineering Systems in Extreme Wear and Erosion Conditions .................................................................. 1970
Y.N. Zhuk
Synthiesis and Characterization of Atmospheric Pressure Chemically Vapor Deposited Aluminum .................................................................................................................... 1982
S. Maeng, S. Gu, R. Levy, F. Gomez, S. Newberg, D. Deavenport, E. Brooman, E. Berman, J. Beatty
Review of the Mechanical Behavior of Micrometric & Nanometric Particulate Reinforced Metal Matrix Composites.......................................................................................... 1993
A. Ahmed, A.J. Neely, K.K. Shankar
Mechanically Milled Al Base MMC Reinforced with Ti3Al Intermetallics ................................. 2005M. Adamiak
A Study of the Deformability of Layered Solids under Plane Strain Condition...................... 2017M.H. Serror, J. Inoue, T. Koseki, Y. Fujino
The Development of Photo-Stimulated Luminescence Spectroscopy for 3D Stress Measurements in the Thermally Grown Oxide Layer of Thermal Barrier Coatings ............... 2028
S. Raghavan, P.K. Imbrie
Indenter Shape Effects on Interface Adhesion Measurement in Thermal Barrier Coating Systems ........................................................................................................................... 2040
Q. Ma, J.L. Beuth, G.H. Meier, F.S. Pettit
Influence of a Viscoelastic Surface Infiltrate on the Damping Properties of Plasma Sprayed Alumina Coatings Part I: Room Temperature............................................................. 2051
P. Torvik, R. Willson, J. Hansel
Influence of a Viscoelastic Surface Infiltrate on the Damping Properties of Plasma Sprayed Alumina Coatings Part II: Effects of Elevated Temperatures and Static Strain ...... 2063
P. Torvik, R. Willson, J. Hansel, J. Henderson
Volume 4
Microstructure and Mechanical Properties of In-Situ TiC Dispersed Steel Matrix Composite...................................................................................................................................... 2075
K.I. Parashivamurthy, P. Sampathkumaran, S. Seetharamu, M.N. Chandrasekharaiah
Kinetics of Radiation Alterations in Polymer Materials Irradiated by High-Energy Electrons ........................................................................................................................................ 2091
G.A. Ismailova
Production and Mechanical Properties of an Epoxy Resin/Aluminum Composite ............... 2095R. Gonzalez-Aguirre, A. Altamirano-Torres, E. Rocha-Rangel, A.B. Soto-Guzman
Bend Formability - Characterization and Performance............................................................. 2104L. Wojnicz, J. Stainbrook, P. Robinson, K. Funke, S. Theobald
Fundamental and Applied Aspects of Newly Developed Cu-Al-Mn-Based Shape Memory Alloys............................................................................................................................... 2117
T. Omori, Y. Sutou, R. Kainuma, K. Ishida
Advances in Coppery Alloy Mold Materials for Plastic Injection and Blow Molding ............. 2127J. Kuli, R. Kusner
Surface Characteristics of Silver Coated Copper Composite Powder by Activation-Electroless Plating Method ....................................................................................... 2134
J.G. Ahn, H.T. Hail, D.J. Kim, J.S. Sohn, H.S. Chung
Bulk Metallic Glass Formation in Ni-Rich Ternary Ni-Nb-Zr Alloy System ............................. 2140Z.W. Zhu, H.F. Zhang, B.Z. Ding, Z.Q. Hu
Bulk Metallic Glasses and Synthesis by Chill Block Casting................................................... 2153N. Patki, S. Pawak, P. Kulkarni
Quasi-Static and High Strain-Rate Compression Behavior of an Fe-Based Bulk Metallic Glass ................................................................................................................................ 2171
G. Sunny, V. Prakash, A.S. Nouri, J. Lewandowski
Dielectric and Resistivity of THz Materials: CdTe, CdZnTe and Tl3AsSe3 Crystals ............... 2177N.B. Singh, R.N. Singh, A. Berghmans, D. Knuteson, D. Kahler, B. Wagner, J. Hawkins
Studies on 20% Gadolinia Stabilized Zirconia Thermal Barrier Coatings............................... 2192L. Chandrasagar, S. Vynatheya, S. Seetharamu, P.M. Jebaraj
Functional Intermediate Layers for the Improvement of Thermal Barrier Coatings Performance .................................................................................................................................. 2204
C.R.C. Lima, J.M. Guilemany
The Effect of Parameters on the Incorporation of Nano-Alumina in to Composite Nickel Electrodeposits.................................................................................................................. 2212
L. O'Donoghue, M.J. Pomeroy
In Situ Neutron Diffraction Study on the Effect of Aluminium Fluoride on Phase Transformation of Mullite from Alumina/Clay ............................................................................ 2224
N. Tezuka, I.-M. Low, I. Davies, I. Alecu, R. Stead, M. Avdeev, E. Mehrtens, B. Latella
Production and Characterization of Al2O3-Based Composites Reinforced with Different Metals ............................................................................................................................. 2234
S. Moreno-Guerrero, L.N. Couvert, J. Miranda-Hernandez, E. Rocha-Rangel
Fracture Toughness of Silicon Nitrides with Various Microstructures Determined by Indentation Fracture (IF) Method............................................................................................ 2245
H. Miyazaki, H. Hyuga, Y. Yoshizawa, K. Hirao, T. Ohji
Formation, Properties and Applications of Bulk Glassy Alloys in Fe-(Cr, Mo)-Metalloid System........................................................................................................................... 2255
A. Inoue, K. Amiya
Assessing the Thermal Stability of Bulk Metallic Glasses for Nuclear Waste Applications................................................................................................................................... 2266
K. Hildal, J.H. Perepezko, L. Kaufman
Iron-Based Metallic Glasses with Exceptional Localized Corrosion Resistance in Chloride-Based Solutions ............................................................................................................ 2275
R. Huang, D. Horton, F. Bocher, J.R. Scully
The Corrosion Resistance of Fe-Based Amorphous Metals: Fe49.7Cr17.7Mn1.9Mo7.4W1.6BB15.2C3.8Si2.4 and other Compositions................................................. 2285
J. Farmer, J. Haslam, S. Day, T. Lian, C.-K. Saw, P. Hailey, J.-S. Choi, R. Rebak, J. Payer, C. Blue, W. Peters, D. Branagan
Industrial Salt Fog Testing of a SAM2X5 Coated Stainless Steel Cylinder............................. 2297L.F. Aprigliano, S.D. Day, J.J. Haslam, J.C. Farmer, R.B. Rebak
Examination of Galvanic Action between Fe-Based Amorphous Metals and Commercial Alloys........................................................................................................................ 2305
H. Ha, J. Payer
Thermal Exposure Effects on Mechanical Behavior of Iron-Based Metallic Glass................ 2315A. Shamimi Nouri, J.J. Lewandowski
Quasi-Static and High Strain-Rate Compression Behavior of an Fe-Based Bulk Metallic Glass ................................................................................................................................ 2329
G. Sunny, V. Prakash, A. Shamimi Nouri, J. Lewandowski
Neutron-Absorbing Coatings for Safe Storage of Fissile Materials with Enhanced Shielding & Criticality Safety ....................................................................................................... 2335
J.S. Choi, J. Farmer, C. Lee, L. Fischer, M. Boussoufi, B. Liu, H. Egbert
Applications in the Nuclear Industry for Thermal Spray Amorphous Metal and Ceramic Coatings.......................................................................................................................... 2347
J. Blink, J. Choi, J. Farmer
Cyclic and Linear Polarization of Yttrium Containing Iron-Based Amorphous Alloys.......... 2361S.D. Day, T. Lian, J.C. Farmer, R.B. Rebak
Long-Term Corrosion Testing of Thermal Spray Coatings of Amorphous Metals: Fe49.7Cr17.7Mn1.9Mo7.4W1.6BB15.2C3.8Si2.4 and Fe48Mo14Cr15Y2C15B6................................................. 2373
J. Farmer, S. Day, T. Lian, C.-K. Saw, P. Hailey, J. Payer, L. Aprigliano, B. Beardsley, D. Branagan
Corrosion Resistance of High-Boron High-Molybdenum Iron-Based Amorphous Metal Fe49.7Cr17.7Mn1.9Mo7.4W1.6BB15.2C3.8Si2.4 for Spent Nuclear Fuel Criticality Control Application....................................................................................................................... 2385
S. Day, J. Haslam, P. Hailey, C. Saw, J. Farmer, N. Yang, D. Branagan
Anodic Behavior of SAM2X5 Material Applied as Amorphous Coatings................................ 2398P.D. Hailey, J.C. Farmer, S.D. Day, R.B. Rebak
Dissolution Modes and Effect of High Temperature Aging on the Corrosion Resistance of Iron Based Amorphous Alloys ............................................................................ 2411
S.D. Day, J.J. Haslam, J. Farmer, R.B. Rebak
Methods to Examine Corrosion damage Evolution for Fe-Base Amorphous Alloy............... 2424P. Pharkya, X. Shan, J. Payer
Iron-Based Amorphous Metals: The High Performance Corrosion Resistant Materials (HPCRM) Program ........................................................................................................ 2435
J. Farmer
Comparison of Crevice Corrosion of Fe-Based Amorphous Metal and Crsyalline Ni-Cr-Mo Alloy ............................................................................................................................... 2467
X. Shan, H. Ha, J. Payer
XRD Technique: A Way to Discriminate Structural Changes in Iron-Based Amorphous Materials ................................................................................................................... 2478
C.K. Saw, T. Lian, S.D. Day, J.C. Farmer
Characterization of Corrosion Resistant Amorphous Metal Coatings Subsequent to Mechanical Deformation .......................................................................................................... 2487
J.J. Haslam, J.C. Farmer, S. Day, P. Hailey, T. Lian, L.F. Aprigliano
Evaluation of the Wear Characteristics of Continuously Cast Ductile Iron and AISI 1144 Steel With and Without Q & T Heat Treatment .................................................................. 2502
P. Gangasani
Application of Rare-Earth Doped Ceramic Nanophosphers for Bioimaging under NIR Excitation................................................................................................................................ 2514
K. Soga, Y. Saito, K. Shimizu, Y. Okumura, T. Konishi
Fabrication of ASTM F75 Powders for Surgical Implants by the Uniform-Droplet Spray Process ............................................................................................................................... 2519
S. Roy, T. Ando, M. Ishida, M. Nishida
Nanotechnology for Treating Organ Failure .............................................................................. 2527T.J. Webster
Probe Method for Local Uniformity within Particulate Filters .................................................. 2538G. Crosbie
Analysis of Thermal Stress in a Honeycomb Structure............................................................ 2550M. Miyazaki, Y. Kato, Y. Miyairi, M. Makino, P. Busch
NANOTECHNOLOGY Fabrication of ZnO Films Consisting of Clusters Aggregated by Nanocrystallites and Their Application on Dye-Sensitized Solar Cells ............................................................... 2563
General and Simple Approach for Visual Detection of Chromium (VI) Ions using Three-Dimensional Nanoscale Structures ................................................................................. 2571
S.A. El-Safty, A.A. Ismail, H. Matsunaga, Y. Kiyozumi, F. Mizukami
The Characterization of Particle Size Distribution of Nano-Tungsten Powders and Ultra-Fine Tungsten Powders by Small Angle X-Ray Scattering Method ............................... 2583
L.H. Zhu, G.J. Shao, D. Siddle, Y.X. Lie
Behavior of Ultra Fine Particles in Electric Field ....................................................................... 2590J. Shibata, N. Murayama, D. Yamashita, R. Shibata
On the existence of Nanoclusters in a Thermally-Cycled Gallium Alloy of Complex Composition and their Effects on Phase Transitions ............................................... 2599
M. Marya
Study of Damage Distribution Over Primary Shear Zone in Metal Cutting Process by Nanoindentation....................................................................................................................... 2609
M. Saket Kashani, V. Madhavan
Formation of Nano-Grains during Biaxial High Frequency Fully Reversed Loading ............ 2618K. Johnson, R. Higginson, P. Dickens, G. West, A. Gupta, D. White
Experimental NanoMechanics: A Look at Edge Dislocations in 4HSiC Crystals................... 2630F.M. Sciammarella, C.A. Sciammarella, L. Lamberti
Influence of Initial Defect Size and Location on Crack Growth and Fracture Behavior of Metal Foils................................................................................................................. 2641
D. Yang, Q. Ziao, F. Tsuchiya, T. Wyrobek
Novel Issues in Modeling of Carbon Nanomaterials ................................................................. 2651R. Scipioni
Mechanical and Impact Properties of Carbon-Nanotube-Reinforced Amorphous Silicon Carbide Composites via Atomistic Simulation Studies ............................................... 2661 M.A. Makeev, D. Srivastava
Recent Developments in Nanomaterials and Nanotechnology................................................ 2670J. Narayan, G.R. Trichy, A. Tiwari
Electronic Spectral Densities Characterization of Individual Dots.......................................... 2682K. Kral
Iron Oxide Nanoparticles Supported onto Sepiolite as Novel Humidity Sensors.................. 2691J.M. Tulliani, V. Naglier, A. Esteban-Cubillo, C. Pecharroman, J.S. Moya
Effect of Si Content and Heat Treatment on Microstructure and Magnetic Properties of Mechanically Alloyed Fe-Si Powders .................................................................. 2701
S. Miraghaei, P. Abachi, H.R. Madaah Hosseini
Nano PbTiO3, Composited with Micron Powder and Its Microwave Absorbing Properties ...................................................................................................................................... 2713
W. Zhihui, H. Dingyong, Y. Aidi
Application of a Nanoporous Material to Improve the Downhole Temperature Survival Time for Oil & Gas Logging Sensors ........................................................................... 2719
S. Rafie, B. Hughes
Fabrication of Patterned Metallic Nanowire Array Using Anodic Aluminum Oxide for Interconnection Applications................................................................................................. 2731
H. Cai, C.L. Gan, B.S. Ong, S.Z. Li, J. Ma, S.C. Chong, G. Sharma, K. Vaidyanathan
Electrospun Cellulose Nitrate Nanofibers for Biosensor Applications................................... 2741S. Nartker, M. Misra, L. Drzal, S. Daugherty, P. Satoh
Investigation of Electrodeposited Co-Based Films Used for MEMS Applications ................ 2751C. Elbuken, M. Yavuz, M.B. Khamesee, S. Kambe, O. Ishii
Volume 5
Quantum Dots and QED ............................................................................................................... 2761
T. Prevenslik
Photoluminescent Intensity Enhancement of ZnS Nanoparticles Prepared by Exploding Wire Technique ........................................................................................................... 2773
N. Goswami
NSTT-NanoTech Surface Treatment Technology May Revolutionize the Steel Industry's Hot-Rolling Mill Operations........................................................................................ 2782
S. Ghosh
Synthesis of Novel, Nanoporous, High Surface-Area, Amorphous MgO Aerogels ............... 2791W. Dong, C. Tang, A. Yao, J. Amsden, S. Yen, J. Paik, J. Sakamoto
Fabrication and Characterization of Micro/Nanochannels and Micro/Nanofluidics Devices for Single Molecule Trapping and Detection ............................................................... 2803
X. Li, W. Hofmeister
Nanostructuring Processes during Cold Gas Dynamic Spry of Cu and Ni Based Composites.................................................................................................................................... 2812
E. Maeva, E. Leshchinsky, M. Lubrick
Semiconducting Ba1-xSrxTiO3 Synthesized at 1050 C............................................................... 2822W. Wu, W. Jones, Y. Liu
Surface Characterization of SiC Nano-Particles and Their Stability in Aqueous Solutions ........................................................................................................................................ 2832
A.K. Bakshi
Synthesis and Characterization of Nanostructured Magnesia-Yttria Based Nanocomposites ........................................................................................................................... 2842
J.F. Al-Sharab, R. Sadangi, V. Shukla, B.H. Kear
Fabrication Strategies and Electrical Characterization of Nanodevices Contacted Using Focused Ion Beam Techniques ........................................................................................ 2853
A. Romano-Rodríguez, F. Hernández-Ramírez, A. Tarancón, O. Casals, D. Prades, J.R. Morante, S. Barth, S. Mathur
Fabrication of Carbon Nanofiber (CNF)/SiAlON Composites by Pulsed Electric-Current Pressure Sintering and Their Mechanical and Electrical Properties......................... 2861
K. Hirota, T. Shibata, M. Kato, T. Nishimura
Study by Topological Methods for Estabilishing Dimensional Repartition of Nano-Ceramic Powders (Packing and Porosity in Real Geometric R3 Space) ................................. 2873
N. Popescu-Pogrion, I. Merioniu, S. Constantinescu
PROCESSING AND PRODUCT MANUFACTURING Stability and Elastic Properties of Tobermorite, a Model of Cement Hydrate at the Nano-Scale..................................................................................................................................... 2885
R.J.-M. Pellenq, A. Gmira, H. Van damme
Monitoring of Hydration Processes in Cement Materials by Broadband Time-Domain-Reflectometry Dielectric Spectroscopy ....................................................................... 2897
N.E. Hager, R.C. Domszy
Hydration Mechanism of Alkali-Activated Fine Slag Geopolymer ........................................... 2908Y.J. Zhang, Y.L. Zhao, D.L. Xu
Green Alternative for the Preparation of Transition Metal Molybdates................................... 2915M. Chehbouni, A. Apblett
Comparative Characterization of Cr3+- and Cr6+ -based Chromate Conversion Coatings on Al Substrates for Test and Measurement Instrumentation................................. 2925
M. Powers, S. Sen, C.N. Cao, M.R. Fukui, D. Hok, F. Kuo, A.A. Maich, J.F. Merckling, J.T. Pham, N.J. spada, E.G. Szkup, E.L. Vallejo, A.S. Williamson, F. Wu, J.D. Wu
Robustness of Materials Selection Decisions Using Various Life-Cycle Assessment Methods ................................................................................................................... 2937
A. Allen, S. Das, F. Field, J. Gregory, R. Kirchain
A Novel Mechanical Process for CRT Glass Recycling ............................................................ 2949F. La Marca, S. De Arcangelis, N. Magliozzi
Preparation of Ceramic Faience from Tunisian Raw Materials ................................................ 2959H. Baccour, M. Medhioub, F. Jamoussi, T. Mhiri
Development of On-Line Analysis System for the Monitoring of Multistage Mixer-Settler ............................................................................................................................................. 2971
J.Y. Lee, J.S. Kim, J.S. Shon, D.Y. Yang
Microwave Processing of Polymer Derived Ceramics from Actively Seeded Precursor ....................................................................................................................................... 2978
S.C. Zunjarrao, P. Dyjak, J.D. metzger, R.P. Singh
Plasma Facility for Basalt Filaments Production ...................................................................... 2989T. Svintradze, Z. Batkhadze, M. Gelenidze, Z. Chankvetadze, D. Gelenidze, F. Marquis, J. Mostaghimi, E. Bakuradze
High-Speed Preparation of Titania Films by Laser Chemical Vapor Deposition.................... 2997T. Goto, T. Kimura, R. Tu
Influence of Process Parameters on Surface Quality of Ni-Based Composite Coatings Deposited using Low Pressure Gas Dynamic Spray Process................................. 3007
K.Y. Sastry, V. Leshchynsky, A. Kagan, E. Strumban, R.Gr. Maev
Glass Melts as Indicators for Liquid Phase Sintering in Alumina ........................................... 3020T. Lam, K. DeCarlo, W. Carty
Preventing Solids Flow and Segregation Problems during Precision Material Manufacturing Operations ........................................................................................................... 3032
R.A. Barnum
Optimum Process Parameters and Influencing Factors for Embedding SiC Fibres in Al 6061 O Matrix through Ultrasonic Consolidation ............................................................. 3048
D. Li, R. Soar
Introduction of an Emerging Compaction Technology - Spark Plasma Sintering (SPS) Method and Systems ......................................................................................................... 3065
M. Tokita, R. Aalund
Effect of Poly-Acrylic-Acid (PAA) Binder System on Characteristics of Dry-Pressed Alumina ........................................................................................................................... 3077
M.I. Zainuddin, S. Tanaka, K. Uematsu
Effect of Pulsed DC Current on Atomic Diffusion of Mo-C Diffusion Couple......................... 3087T. Kondo, M. Yasuhara, Y. Kodera, M. Ohyanagi, Z.A. Munir
Mechanical Performance of Resistance Spot Welds in Dissimilar AHSS Combinations ................................................................................................................................ 3094
V.H. Baltazar, I. Khan, M.L. Kuntz, N. Zhou
Effect of Weld Microstructure on the Static and Impact Performance Spot Welded (RSW) Dual Phase Steels ............................................................................................................. 3103
M.I. Khan, M.L. Kuntz, Y. Zhou
Advanced High Strength Steel (AHSS) Weld Performance Study for Autobody Structural Components ................................................................................................................ 3114
D.F. Maatz
High Temperature Brazing of Monolithic 430 to Porous 430L Stainless Steel for Hydrogen Separation Applications ............................................................................................. 3129
V. Malave, A. Meier, K.S. Weil
Influence of Laser Welding on the Formability of AHSS Steels............................................... 3141N. Sreenivasan, M. Kuntz, Y. Zhou
Effect of Titanium and Carbon on the Microstructure of Fe-Al-Cr Weld Overlays................. 3153K. Adams, J. DuPont
Laser Weld Repair of Single Crystal Ni-Base Superalloys ....................................................... 3165T. Anderson, J. DuPont, T. DebRoy
Repair Welding of Nodular Iron Castings for Heavy Duty Gas Turbines ................................ 3175S. Janssen, E. Maldfeld, J. Braun
Laser Powder Deposition for Making Functional Net-Shape Parts and Repairing Damaged Gas Turbine Componenets......................................................................................... 3187
L. Xue, J. Chen, S.-H. Wang, Y. Li
Mechanisms of Macrosegregation Formation Near Fusion Boundary in Welds Made with Dissimilar Filler Metals............................................................................................... 3201
Y.K. Yang, S. Kou
Investigation of Metallurgical Features and Local Mechanical Properties in Laser Drilled Waspaloy ........................................................................................................................... 3213
R. Bright, J. Garofano, C. Weiss, M. Aindow, H. Marcus
Evidence of Macrosegregation near Fusion Boundary in Welds Made with Dissimilar Filler Metals ................................................................................................................. 3220
Y.K. Yang, S. Kou
The Use of Electrodeposited Coatings as Interlayers in Transient Liquid Phase Bonding.......................................................................................................................................... 3232
R.K. Saha, T.I. Khan
Maintaining Work Hardening in Resistance Brazed Aluminum Alloy Periodic Cellular Metals............................................................................................................................... 3243
E. Bele, B. Bouwhis, G. Hibbard
Brazing of Porous Aluminum Alloy 6101 to Monolithic Aluminum Alloy 6061 for Composite Sandwich Structures Used in Thermal Management Applications...................... 3254
A. Bauer, A. Meier, M. Powell, K.S. Weil
Reactive Air Brazing of ZTA to Ni Alloys with Ag-CuO Braze Alloys ...................................... 3266E. Prevost, A.J. DeMarco, B. MacMichael, A. Meier, J. Hoffman, W. Walker
Experimental Complex for Investigations of High-Temperature Behaviour of Molten Metals in Contact with Refractory Materials.................................................................. 3278
N. Sobczak, R. Nowak, W. Radziwill, J. Budzioch, A. Glenz
Alloy Depletion and Martensite Formation during Glass-to-Metal Joining of Austenitic Stainless Steels .......................................................................................................... 3286
Application of Ultrasonic Peening in Manufacturing, Rehabilitation and Repair of Welded Elements and Structures ................................................................................................ 3297
Y. Kudryavtsev, J. Kleiman
Automatic Fault Detection in Friction Stir Welding................................................................... 3309P.A. Fleming, K.A. Fleming, D. Lammlein, D.M. Wilkes, T. Bloodworth, G. Cook, A. Strauss, D. DeLapp, T. Prater, T. Lienert, M. Bement
Dispersion and Joining of Carbon-Nano-Tubes ........................................................................ 3316S. Sahin, M. Yavuz, E. Wang, R. Zhao, N. Zhou
Glass-Metal Joining in Nuclear Environment: The State of the Art ......................................... 3325M. Jacobs, B. Brichard, G. Van Oost
The Role of Ag Diffusion Control Layer in the Titanium Dissimilar Joining when using an Ag-Cu-Ti Filler................................................................................................................ 3337
M.K. Lee, J.G. Lee, j.K. Lee, G.H. Kim, J.J. Park, Y.R. Uhm, C.K. Rhee
Microstructural Evolution of Ti Dissimilar Joint Brazed Using a Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 Amorphous Filler............................................................................... 3347
The Nucleation Kinetics of Sn in Sn-Ag-Cu Solder Joints: Relation to Microstructure ....... 3358B. Arfaei, M. Benedict, E. Cotts
Materials Science and Engineering: A Rewarding Career........................................................ 3365D. Richerson
Interfacial Reaction and Joint Strength of Sn-3.0Ag-0.5Cu/Cu Solder Bumping Made by Two Binary Electroplating ............................................................................................ 3379
S.-H. Lee, Y.-S. Shin, C.-W. Lee, J.-G. Kim, J.-H. Kim
Nanocrystalline Diamond Coated Cutting Tools ....................................................................... 3399J. Hu, Y. Chou, R. Thompson
Combined Magnetron Sputtering and Ion Implantation - a High Energy Ion Assisted Deposition Method for Producing Nano-Structurated Coatings.............................. 3411
C. Ruset, E. Grigore, H. Maier, R. Neu
Investigation of Plasma Enhanced Chemically Vapor Deposited Tantalum on High Strength Steels.............................................................................................................................. 3424
Y. Suh, W. Chen, S. Maeng, R. Levy, H. Thridandam, K. Cuthill, T. Gaffney
Novel CO2 Absorbents using Lithium-Containing Oxide.......................................................... 3434M. Kato
Volume 6
SPECIAL TOPICS Strategies for Intellectual Property Protection .......................................................................... 3444
M. Harper, R. Citkowski
Patent Licenses and the Recent Supreme Court MedImmune Decision ................................ 3451P. Fleischut, T. McBride
U.S. Patent Law Update - 2007..................................................................................................... 3456P. Fleischut
Characterization of Electrolessly Plated Graphite Foams with Particle Additions................ 3462M. Asaro, J. Mueller, P. Dykema, B. Poquette, S. Kampe, G. Pickrell
STEEL Tank Car Steels to Improve Performance................................................................................... 3468
R.D. Sims
An Inspection Tool for Tank Car Thermal Protection System.................................................. 3476S. Wong
Effects of Niobium, Titanium and Nitrogen on Microstructure and Mechanical Properties of Normalized Tank Car Steel Plates........................................................................ 3484
M. Manohar, W.E. Heitmann
The Influence of Sulfur Concentration Below 0.006% Along With Sulfide Shape Control on the Charpy V-Notch Properties of Normalized and Stress Relieved TC128 Grade B Steel Plate ........................................................................................................... 3494
W.E. Heitmann, F.C. Feher, C. Hybinette, M. Manohar
As-Rolled Plate Product with Improved Yield Strength, Toughness, and Weldability for Pressurized Railroad Tank Cars ........................................................................ 3502
R.L. Bodnar, F. Hamad, C. Penniston, S. Roysum
Processing Alternatives for Optimized Strength and Toughness Balance of ASTM A709 HPS 70W Composition........................................................................................................ 3518
A. De, M. Manohar, W. Heitmann, F. Feher
Graphical Expressions of Alloying Effects in Fe and Their Analogical Applications................................................................................................................................... 3531
Y. Mae
The Effect of Aluminum on Isothermal Oxidation Resistance of Austenitic Heat Resistant Steels ............................................................................................................................ 3543
M.O. Aminian, J. Hedjazi, Y. Kharazi
The Reception of Zinc Coverings in Conditions of Self-Propagating High-Temperature Synthesis ................................................................................................................ 3557
B. Sereda
Modelling of the Concentric Solidification Technique using DICTRATM ................................. 3560S. Aminorroaya, R. Dippenaar, M. Reid
In-situ Observation of the Delta-Ferrite to Austenite Phase Transition in Fe-C Alloys ......... 3572S. Niknafs, R. Dippenaar
Embrittlement Mechanisms at High Temperatures for a C-Mn Steel with High Residuals Content......................................................................................................................... 3582
J. Calvo, J.M. Carbrera, A. Rezaeian, S. Yue
Effect of Mould Taper, Mn/S Ratio and Ems on Quality of Continuously Cast Bloom .......... 3595B. Mukhopadhyay, S.K. Ray, A.K. Bandopadhyay, K. Patwari
Influence of the Casting Conditions on Slab Quality of Low Carbon Steel ............................ 3603G. Wen, P. Tang, G. Luo, H. Xu, Z. Chen
Skin-Pass Rolling of Steel Strip Using Liquid Nitrogen............................................................ 3611G. Plicht, H. Schillak, M. Lin, R. Edwards, T. Mebrahtu, H. Hofinghoff, T. Demski
Deformation Characteristics of Oxide Scale in Hot Rolling by Scale Transfer Method Using Vacuum Hot Rolling Mill ...................................................................................... 3620
A. Segawa, T. Taguchi
Validity of Heat Transfer Coefficient Based on Cooling Time, Cooling Rate, and Heat Flux on Jominy End quench Test....................................................................................... 3632
A. Sugianto, M. Narazaki, M. Kogawara, A. Shirayori
Efficient Cyclic Thermal Processing of Materials...................................................................... 3642S.S. Sahay
Application of the Life Cycle Modeling to Forging of Connecting Parts ................................ 3651L. Madej, S. Weglarczyk, M. Packo, R. Kuziak, M. Pietrzyk
Standardized and Computer Controlled Packing Philosophy (DCPP) for Steel..................... 3661J. Rajagopalan, T. Aijo
Heat Transfer during Run-Out Table Cooling - Effect of Jet Configuration............................ 3680M.A. Wells, M. Militzer, V. Prodanovic
Influence of the Chemical Composition on Transformation Behavior of Low Carbon Microalloyed Steels under Continuous Cooling .......................................................... 3691
J. Calvo, A.M. Elwazri, S Bai
Effects of Alloying Elements on Microstructure and mechanical Proeprties of Microalloyed Steels Undergoing Cool Deformation .................................................................. 3700
A. Fatehi, J. Calvo, A.M. Elwazri, D.Q. Bai, S. Yue
Thermomechanical Processing Effects on the Elevated Temperature Behavior of Niobium Bearing Fire-Resistant Steel......................................................................................... 3711
Integrated Machining and Surface Modification of Steel Components................................... 3753M.A.A. Sadiq, P. Laxminarayana, V.S.R. Murti
Developments in Citric Acid Passivation of Stainless Steel .................................................... 3761R. Kremer
The Retrieving of Boronizing Coverings on Steel Received in Self-Propagating High-Temperature Synthesis Conditions ................................................................................... 3767
B. Sereda, S. Sheyko
Effect of Thermal Cycling on the Corrosion and Microstructure of Plain Carbon Steels.............................................................................................................................................. 3771
A.S. Elmaryami, E. Abdlmanam
Microstructure Evolution of a V-N Steel during Seamless Tube Hot Rolling ......................... 3785R.N. Carvalho, M.A.C. Ferreira, D.B. Santos, R. Barbosa
Continuous Annealing Technology of Cold Rolling Automotive Sheet .................................. 3795H. Jianfeng
Measurement of the Mechanical Properties of Austenite-\Martensite Mixtures at the Reaction Temperature............................................................................................................ 3806
C. Zheng, D. Watt
Microstructure and Mechanical Properties of High Strength Linepipe Steels ....................... 3808D. Bai, L. Collins, F. Hamad, X. Chen, R. Klein
The Effect of Heating Rate and Prior Microstructure on Austenitization Kinetics of 5150 Hot-Rolled and Quenched and Tempered Steel ............................................................... 3820
K.D. Clarke, C.J. Van Tyne
Effect of Tempering on the Microstructure and Properties of Copper and Boron Bearing Very Low Carbon Steels Treated with DQ/T ................................................................ 3836
S. Jiao, X. Liang, C. Wang, L. Jin, Y. Gong
Flash Bainite Nucleated in 80ms by Water Quenching............................................................. 3845G. Cola
Bainitic Transformation in Carburized 4317 M2 ........................................................................ 3855P. Nash, S. Chupatanakul
An Assessment of Material Properties on Bohler W360 Isobloc for Hot Work Tool Steel................................................................................................................................................ 3875
F.T. Lee
Choosing Vancron Grades for Cold Work Metal Forming Tools ............................................. 3884F.T. Lee
Enhancing Plastic Mould Steel Tooling Performance with Nimax .......................................... 3890F.T. Lee
Investigation of the Influence of Deep Cryogenic Treatment on Residual Stresses in HCHC D2 Steels using X-Ray Diffraction ............................................................................... 3898
S.V. Lomte, S.B. Chikalthankar
The Strengthening Behavior in V-N Steels................................................................................. 3911M.J. Hua, C.I. Garcia, A.J. DeArdo, M.K. Miller, R.J. Glodowski
Limited - Hardenability Steels and New Heat Treating Technologies ..................................... 3921N. Kobasko
Development of 780MPa Grade Steel Plates with Excellent Deformability by Microstructural Control through the On-Line Heating Process ............................................... 3931
K. Ueda, S. Endo, S. Mitao, N. Shikanai, T. Ito
Study of the Grain Size Effect on the Deformation Behavior of Microalloyed Steels............ 3942K. Muszka, J. Majta, P.D. Hodgson
Cyclic Plasticity of Steel............................................................................................................... 3954C.K. Seal, M.A. Hodgson, W.G. Ferguson
Microstructure and Properties of Cold-Rolled-and-Annealed Low-Carbon Manganese TRIP Steels................................................................................................................ 3963
M.J. Merwin
Mechanical Behavior and Microstructure Characteristics of TRIP Steel Plates under Various Heat-Treating Conditions.................................................................................... 3984
Q. Tian, X. Dong
Strain Aging Behavior of Bake Hardening Steel for Automotive Application ........................ 3993A. Vasilyev, N. Kuzmin, a Lee
Influence of Normalizing Conditions on Electrical Steel Texture Development .................... 4008S.M. Shin, S. Birosca, S.K. Chang, B.C. De Cooman
Mechanical Properties of 3% Silicon Steels during Warm Deformation ................................. 4020S. Lee, S.K. Chang, B.C. De Cooman
Morphology and Crystallography of Copper Sulfide Precipitated during Isothermal Heat Treatment in Iron Alloy..................................................................................... 4031
Z. Liu, M. Kuwabara, Y. Iwata
A Study of the Relationships Between Inclusion Morphology and Reduction Ratio for Bar Products............................................................................................................................ 4043
Y. Huang, J. Yang
Study of Hot Workability of Free-Cutting Steels by the SKIZ Technique................................ 4052C. Revilla-Gomez, B. Lopez, J.M. Rodriguez-Ibabe
Dispersion Strengthening of (sigma) Phase in Ferritic and Austenitic Stainless Steels After Hot Rolled ................................................................................................................. 4064
C.-C. Hsieh, D.-Y. Lin, W. Wu
Microstructural Investigation of Stainless Steel AM350 Pulsed Nd-YAG and Fibre Laser Welds ................................................................................................................................... 4075
L. O'Donoghue, M. Quinlan, P. Phelan
Effect of Nitrogen Content and Strain Rate on the Deformation Behavior of High-Nitrogen Austenitic Steel (18Cr-14Mn-4Ni-3Mo-xN) with Various Nitrogen Contents......................................................................................................................................... 4086
S.M. Nam, Y.-S. Kim, S.-J. Kim
Sliding Wear Mechanism of the Ultra-Fine Grained (UFG) Dual Phase Steel under Low and High Applied Load Conditons...................................................................................... 4095