FOOD HANDLING MARLEN SERIES FLOOR DRAINS MARLEN SERIES PRODUCT MOLDS MARLEN SERIES VATS • Marlen vats set the standard for quality and construction features. • Fabricated entirely from Type 304 stainless steel. • Lip and legs are specifically designed to withstand the wear and tear of high production applications. V EDGE DUMP BUGGIES • Stainless steel drip guard with end caps meets USDA standards • Type 304 stainless steel construction (11-gauge bottom, 14-gauge body, TIG welded interior, MIG welded exterior) HIGH LIFT DUMPER • High-lift dumper with discharge hopper • 3,500 lb capacity • Hydraulic lift and dump operation • Custom dump height • Type 304 stainless steel construction • Wash-down rated components ROCK OVER DUMPER • Up to 5,000 lbs lifting capacity at 54” dump height • Powered up and down – rock-over action • Fully-welded dump chute • Optional stainless cylinders BACKSAVER • The economical solution to back problems • Portable 39” lift height • Tilt left or right • 110 VAC VAT TILTER • The solution to vat and combo cleaning with a simple rock-over design. • Works on compressed air SCREEN PRESS • Custom designed to fit your requirements • Floor and rail models • Actuating system allows unlimited product heights from 1” to 6” • Top screens “tied” together to form consistent product for all levels PRODUCT MOLDS & PARTS • Spring and clips • Cast ratchets • Stamped ratchets COLUMN DUMPER • Type 304 stainless steel construction with 10-gauge columns • Accepts 400 lb and 500 lb V-Edge dump buggies – floor level loading • 800 lb capacity with up to 120” lifting range • Custom engineered and designed STAINLESS TANKS • Type 304 stainless steel construction throughout • Sanitary design • Reinforced stress points • Interior welds: TIG or MIG • Interior finish: 2B welds, ribbon polished • Custom engineered and designed TROLLEYS • Suitable for brine chill • Single and double trolleys available • Stainless steel wheel and ball bearings • Heavy-duty up to 3,000 lb load capacity MARLEN SERIES FLOOR DRAINS • Built-in P-trap provides water seal to prevent sewer gas odors • Single piece, removable, 1/2” thick stainless steel grate • Heavy-duty for forklift traffic • Easy clean, 4” removable plug with gasket for access to drain piping after P-trap MARLEN SERIES PRODUCT MOLDS • Several sizes and shapes available • All molds and components use Type 304 stainless steel or are custom to your specifications SEMI-AUTOMATIC MOLD SYSTEM • Improve yields • Type 304 stainless steel construction • Flexible system for future growth • Mold size to fit your product • Rack construction with spring loaded presses • Rack load and unload systems