Marine Products From…. Australian Inhibitor. The Marine Silk™ story The Marine Silk™ story Leaving boats moored for long stints in water presents its.

Marine ProductsMarine Products

From…. Australian Inhibitor

The Marine SilkThe Marine Silk™™ story story • Leaving boats moored for long stints in water presents its own Leaving boats moored for long stints in water presents its own

unique problems. “Algae and Barnacle growth”.unique problems. “Algae and Barnacle growth”.

• Resale values of boats up to 5.48 meters can be affected if fully Resale values of boats up to 5.48 meters can be affected if fully anti fouled. anti fouled.

• Long term residents of a tidal river system approached Australian Long term residents of a tidal river system approached Australian Inhibitor to come up with a solution to treat boats for short Inhibitor to come up with a solution to treat boats for short durations in water. durations in water.

• Australian Inhibitor with its vast chemical and engineering Australian Inhibitor with its vast chemical and engineering resources conducted both laboratory and sea trials of a range of resources conducted both laboratory and sea trials of a range of formulas. formulas. –

• After 159 separate sea trials a workable product was formed that After 159 separate sea trials a workable product was formed that not only protected the hull from algae and barnacles however also not only protected the hull from algae and barnacles however also provided significant increases in boat speed and fuel savings provided significant increases in boat speed and fuel savings

• Further results can found within our technical data on the Further results can found within our technical data on the accompanying pages . accompanying pages .

How Marine SilkHow Marine Silk™™ works…. works…. • Marine silk™ when applied provides a textured surface not unlike

that of the skins of sharks and dolphins .This results in reduced “drag” through the water thereby allowing greater speed and reduced fuel consumption.

• Marine Silk™ will inhibit the growth of Barnacle and Algae and other marine organisms on a short term basis by preventing “anchoring” of such organisms on to the hull.

• Marine Silk™ will make the removal of of such organisms easier for boats left in the water for periods up to 1 month .

• Marine Silk™ should be applied to a clean dry hull where it will form a highly impervious water repellent film.

•

• Marine Silk™ is proudly developed in Australia .

Trials on the water …Trials on the water …

A total of 159 separate tests were carried out on Port Phillip bay In displacement mode speeds & cruising speeds on the “plane”.

What we discovered ….What we discovered ….• Displacement Speeds Displacement Speeds • Clean hull rpm marine silk appliedClean hull rpm marine silk applied

• Knots kph knots kph % increaseKnots kph knots kph % increase• 3.82 7.075 1250 4.14 7.67 8.48%3.82 7.075 1250 4.14 7.67 8.48%• 4.90 9.075 1500 5.18 9.67 6.05%4.90 9.075 1500 5.18 9.67 6.05%

• cruising /Planing speeds cruising /Planing speeds • 16.47 30.50 4000 17.00 31.50 3.28%16.47 30.50 4000 17.00 31.50 3.28%• 18.76 34.76 4250 19.17 35.50 2.16%18.76 34.76 4250 19.17 35.50 2.16%• 20.79 38.50 4500 21.19 39.25 1.95%20.79 38.50 4500 21.19 39.25 1.95%

• Knots kph litres /hour litres/hour fuel Knots kph litres /hour litres/hour fuel savingssavings

• 16.2 30 14.32 13.97 2.44%16.2 30 14.32 13.97 2.44%• 18.9 35 16.15 15.50 4.02%18.9 35 16.15 15.50 4.02%• 21.6 40 19.67 18.07 8.13%21.6 40 19.67 18.07 8.13%

• A total of 158 tests were performed over many weeks the above being a A total of 158 tests were performed over many weeks the above being a precise version of all tests precise version of all tests

Laboratory /on water tests… Laboratory /on water tests…

One month in the water without any application Note.. severe algae and barnacle growth

One month Marine silk applied Traces of dirt and scum only no algae growth…

Marine kit grease Marine kit grease

Small compact pack 15 gram for on boat use ideal for Boat zippers, battery terminals, anchor winches

Product is thermally stable from -40 ºC to +260º C .

for Boat zippers ….

VCI emitters VCI emitters

• VCI emitters for control panels and sensitive electronic equipment VCI emitters for control panels and sensitive electronic equipment

Product saturates the internal free space of cabinet and protects vital components from corrosion .

Rust preventatives –Aerosol & Liquids

400 gram aerosol & 20litre / 200 litre liquid.

• Thermally stable • Thixotropic • Non stain -40ºC to + 260º C

• Sunlight resistant • Lubricates and penetrates

Innovation….. Do not go where there is a path, go instead where there is no path and Leave a trail ……

Proudly Protecting Australia’s Local & Export Industries

Australian Inhibitor Pty ltd 6-Nicholas drive, Dandenong South 3175 Phone 03 9768 2322 Fax 03 9768 2111 Email [email protected] Webwww.australianinhibitor.com.au