Dutch knowledge is called in when the going gets tough 06 Van Oord Offshore offers complete marine solutions Keppel Verolme: poised for continued growth Jumbo Offshore is raising the bar ‘Near Market, Near Customer Strategy’
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Dutch knowledge is called in when the going gets tough
06
Van Oord Offshore offerscomplete marine solutions
Keppel Verolme: poisedfor continued growth
Jumbo Offshore is raising the bar
‘Near Market, Near Customer
Strategy’
Dredging
Dredging and Marine Contractors
Marineingenuity
Offshore Wind Projects
Offshore Oil & Gas
In just two words, marine ingenuity,
we express that we are passionate
dredging and marine contractors
with a worldwide innovative
approach to meet your challenges.
Our people - who manage a
versatile fleet - specialise in
dredging, marine engineering
and offshore projects (oil, gas
and wind).
www.vanoord.com
Get more info with
2013
nr. 0
6o
ffsh
ore
ho
llan
d
Extreme precision
Breman Machinery, The Netherlands, T +31 (0)38 - 385 53 73, [email protected], www.breman-machinery.nl
Great challenges need sophisticated solutions. This is the work of specialists. Machines which produce components with exceptional proportions and extreme accuracy. Welcome to Breman Machinery. We are situated in Genemuiden (the Netherlands), beside open water, which means we have a direct connection to the international ports, including Rotterdam, Amsterdam and Antwerp.
For over 150 years, we have offered customized solutions for our relations all around the world. We build components which weigh tens or even hundreds of tonnes, yet are within a tolerance of a few hundredth of a millimeter. The extreme precision you are looking for. Let’s meet in person! Call +31 (0)38 385 53 73 or go to www.breman-machinery.nl.
130709_Breman_Adv_A4_04.indd 1 05-04-13 16:27
Improve your Oil & Gas safety
Cranes are swinging heavy objects across the deck; drills, pumps and shakers are in constant operation. The pace at an oil rig needs to be high and a single minute of downtime would be costly. Nord-Lock’s bolt securing systems are not only safe and reliable, but also cost effective.
Nord-Lock Benelux B.V. • Tel: +31 (0)50-5275656 • Fax: +31 (0)50-5256744 • [email protected] • www.nord-lock.nl
Visit Nord-Lock at OTC 2013 - Houston USA - 6-9 May - Booth #3807
Find out how Nord-Lock can help you on your drilling equipment, top drives, rotating equipment, cranes, blowout preventers, turbines, compressors, fracturing pumps, and more!
12013
02 | World wide experience
14 | Large number of new building programmes
21 | New anchor handler design
22 | Market leaders in 3-layer coating technology
28 | First Happy S delivered
31 | Dockwise delivers ETLP hull
32 | Outstanding in the sensor market
34 | Packhorse offshore support vessel
36 | Self-propelled jack-up
42 | Ingenious gas plant Maasvlakte Rotterdam
May | 2013
6 | Complete Marine SolutionsDutch-based Van Oord is a leading international contractor specializing in dredging, marine engineering and offshore projects. And ready to become a prominent EPC contractor.We spoke with Maurice de Kok about the unique shallow water pipe lay barge Stingray.
10 | Provider of choiceKeppel O&M believes in its ‘Near Market, Near Customer strategy’ catering directly to customer need and contributing to local content. Located in Rotterdam, the Netherlands, Keppel Verolme has grown to become Europe’s trusted offshore and marine solutions partner.
18 | Game changing projectsJumbo’s innovative concept, ‘Lift. Ship. Install. All in one go.’ is proving extremely efficient and is popular with its clients. Now Jumbo Offshore is moving a step up, being awarded two ‘game changing projects’ for 2013.
26 | Drilling ship for Arctic AreaThe design of a drilling ship for the Arctic area has once again been brought several steps closer to realisation. The ship will require an anchor system with which ice of up to 3.1 metres thick can be broken. A Dutch student produced a computer model for the overall system.
Offshore Holland is a high-quality magazine
with the objective to promote the interests and
export opportunities of the Dutch supply and
service companies in the upstream oil and gas
industry. Moreover technological developments
will be highlighted in order to contribute to
a positive representation and positioning of
the Netherlands as innovative and ingenious
partner country.
Initiators
Supported by
AdvertisingNavingo BV, Westerlaan 1
3016 CK Rotterdam, The Netherlands
Contact: Jeroen Tresfon
T: +31 10 209 2600. E: [email protected]
EditorialHan Heilig and Paul Schaap
T: +31 255 530577
ProductionPractica Productions, IJmuiden:
Peter Ruiter and Corine van Luijken
©All copyrights reserved by Offshore Holland
2 2013
As Managing Director of IRO - the Association of Dutch Suppliers in the Oil and Gas Industry, I am proud to present you the next edition of Offshore Holland!
This sixth edition of Offshore Holland is presented to you on the occasion of the Offshore Technology Conference 2013 in Houston, Texas. In our Holland Pavilion at the OTC you will find members of IRO (The Association of Dutch Suppliers in the Oil and Gas Industry) who have long term experience and are known for their innovative products and dedicated services. Dutch suppliers belong to the top 5 in the upstream Oil and Gas Industry, both onshore as offshore.
Several of our offshore related members are market leaders in their part of the business and many are involved in major oil and gas projects all over the world. Used to sail the oceans for centuries and fighting the sea so we can live below sea-level, the Dutch developed skills and techniques to handle challenges in all kinds of terrain and with all nationalities.
Also in this edition, you will be informed about the expertise and service of Dutch companies that are related to the offshore industry. High profile technological develop-ments are presented to you demonstrating the innovative, creative and resourceful character of The Netherlands.
Especially this innovative power of our member companies is of great value in the current developments in the oil and gas industry: deep water, arctic, floating production units, LNG terminals and heavy lift capacity are just a few examples of challenges were the Dutch are leading in providing the right solutions.
To promote the qualities of Dutch suppliers in the oil and gas Industry, IRO organizes Dutch group participations at all major international oil and gas events and outgoing trade missions
and match making programs often in close cooperation with our Embassies of the Kingdom of the Netherlands.
In the Netherlands Oil & Gas Catalogue you can find more information on the activities, products and services of the Dutch suppliers. The catalogue is distributed at (international) exhibitions, trade missions and seminars and can also be found online at www.iro-noc.nl. For up-to-date information on where and when to meet the Dutch suppliers at export promotional events, have a look at www.iro.nl.
I wish you all a pleasant reading of Offshore Holland and lots of good experiences with the Dutch suppliers in this dynamic industry!
Yours sincerely,Sander VergroesenManaging Director
IRO - The Association of Dutch Suppliers in the Oil and Gas Industry
Welcome
Dutch suppliers, world wide experience
32013
Date Activity City/Country
2013
5-7 June Oil & Gas Asia Kuala Lumpur, Malaysia
3-6 September Offshore Europe Aberdeen, United Kingdom
8-10 October OTC Brasil Rio de Janeiro, Brazil
15-16 October Offshore Energy Amsterdam, The Netherlands
5-8 November Europort Rotterdam, The Netherlands
10-13 November ADIPEC Abu Dhabi, United Arab Emirates
27-29 November ASCOPE Hochiminh City, Vietnam
2014
19-21 February Australasian Oil & Gas Perth, Australia
IRO Exhibitions and Export programme 2013
adress Engelandlaan 330
2711 DZ Zoetermeer
The Netherlands
postal Postbus 7261
2701 AG Zoetermeer
The Netherlands
mail [email protected]
site www.iro.nl
phone +31 (0)79 341 19 81
fax +31 (0)79 341 97 64
4 2013
Dutch-based Van Oord is a leading international contractor specializing in dredging, marine engineering and offshore projects (oil, gas and wind). For over 100 years, the company has helped to create the infrastructure for the world of tomorrow. Maurice de Kok, presently Area Manager Offshore Pipeline Installation, started his career at Van Oord in 1990 as a civil engineer. The first two decades he worked on the dredging side, in 2010 he became responsible for the Offshore Oil & Gas division of the family-owned company. We spoke with Maurice about the role of an offshore EPC contractor and the unique shallow water pipe lay barge Stingray.
Complete marine solutions Van Oord Offshore ready to become a prominent EPC contractor
52013
Complete marine solutions Stingray specifications
Overall length 120 m
Overall breadth 40 m
Design draft 5 m
Classification ABS XA1 Barge
Accommodation up to 300 persons
Total installed power 6 x 1230 kW
Mooring system 10 x 12 t Flipper Delta
Crawler crane 250 t Kobelco
2500CE, 42 m boom
Free deck area 2000 m2
Allowable deck load 12.5 t/m2
Tensioners 2 x 70 t capacity
Welding stations 3 fully automatic
welding stations
NDT/repair stations 1
Field joint stations 3
Stinger Fixed, fully adjustable,
55 m length in 2 sections
A&R winch 150 t capacity,
upgradeable to 200 t
Main crane 500 t revolving crane
Main hook capacity 500 t @ 18 m radius
(optional 2000 t)
Van Oord’s one-stop-shop.
6 2013
As an independent family business Van Oord is characterized by visible leadership, long-term vision and a sound financial position. Substantial investments in people and equipment are made with great care to ensure the continuity of the business. As part of its on-going invest programme, the company launched four new vessels in 2011; the self-propelled cutter suction dredger Athena; the new flexible fallpipe vessel Stornes; and the two new multicast Oceanus and Cronus. Currently under construc-tion are the Aeolus (installation vessel for offshore wind farms) and Artemis (self-propelled cutter suction dredger). The new shallow water pipelay barge Stingray is, of course, also part of this investment plan, which is aimed at strengthening Van Oord’s position as a well-equipped offshore EPC contractor.
Interface risksThe Stingray will be operated by Van
Oord’s Offshore Division, a separate business unit that provides complete (EPC) packages that focus on the preparation, installation and protection of offshore oil and gas infrastructure, offering maximum value for its clients’ investments by minimising interface risks. Maurice de Kok: “In a subcontractors role it is impossible to mitigate scheduling issues for a client, that has to be executed by the main contractor.”
“As a subcontractor we have experienced the knock-on effect of scheduling issues. And to tackle that problem we only saw one solution: to become a prominent EPC contractor ourselves. Van Oord has executed several contracts as EPC contractor, the missing part in our One Stop Shop strategy was the pipelay capability. We had to subcontract this part with the associated risk of availability and scheduling issues with a third party. After discussions with our Board a
business plan was made that resulted in an investment proposal. Extensive market research was done including interviews with future clients i.e. operators. With the potential to offer our One Stop Shop concept, we received green light for this investment: Stingray was build and now we are in a position to offer our clients the complete near shore solution as EPC contractor for offshore marine construction including pipeline installation. We own and operate all equipment required to offer our services to the oil and gas industry and do no longer depend on third party equipment. Our concept will make Van Oord more competitive by cutting the risk factor that any main contractor will put on the scope of a subcontractor to manage the interface and the risk associated with the interface. This will result in a cost efficient solution of any marine construction project for our clients.”
Van Oord’s first shallow water pipe lay vessel Stingray
was named at the COSCO shipyard in Nantong, China
at the end of September last year. The naming ceremony
was performed by Mrs A. Athmer-Albersen, wife of
Managing Director Offshore, Mr J.B.E.M. Athmer.
72013
Not unimportant in this respect is of course the fact that the offshore oil and gas industry is a segment which is less troubled by the present economic crisis. The worldwide demand for energy, the relatively high price of oil and the need to keep reserve positions up mean that oil companies are continuing to invest in exploring onshore, offshore shallow water and offshore deep water reserves.
SwitchDe Kok made the switch from dredger to EPC offshore contractor without real difficulty. “In principle, it was not difficult, but more a challenge. And more far-reaching, giving our work a completely new élan. As a dredging company we also undertook plenty of non-dredging related projects, such as building quay walls, breakwaters, bridges and tunnels. In other words, we have a broad background in project and logistic management. However, as EPC contractor you are
fully focused on an entire project, and that implies the inclusion of much engineering. That is the innovative aspect. We are no longer a single piece involved in someone else’s planning to finally complete the total puzzle. Instead, we ourselves are now responsible for the puzzle as a whole, and specifically for ensuring that all the puzzle pieces slot seamlessly together is where we see the biggest advantages for our customers. The difference is that while as a dredger you work often for government customers and the occasional project developer, in oil and gas, our clients are mainly the major operators like Shell, Exxon, BP, Chevron and the national oil companies in the Middle and Far East.”
Barge modificationThe Stingray was built at Jingjiang Nanyang Shipyard (owned by POET Singapore) in China and was acquired by Van Oord in July 2011.
Since its acquisition, modifications of the barge to make it fit for pipelaying have been executed. The modification works consisted of design, construction and installation of the stinger, of a marine evacuation system (MES) of firing line facilities and modifications to the accommodation. The entire process took around nine months, followed by a naming ceremony on September 28, 2012, at Cosco Shipyard in Nantong, China. The vessel, equipped with a fully automated 10 point mooring system, is suitable for installation and replacement of offshore pipelines of up to 60 inch diameter, in shallow water. The prime focus for this unique barge is pipelaying works in combination with shore approaches and other associated activities in shallow water from shore to - 50 m. “There lies the strength of Van Oord,” emphasizes Maurice de Kok.The Stingray is suitable to install pipelines in S-lay mode. Typically, laybarge methods are used where
The shallow water pipelay vessel Stingray during her trials.
8 2013
substantial lengths of pipe have to be laid continuously. In addition, the vessel is also suitable for a wide range of light offshore installation works such as buoy and manifold installation, hook-up, commissioning, piling and midline tie-ins.
First projectAfter sea trials and testing, the Stingray became fully operational in Q1, 2013, with the first task scheduled in Korea where it is executing a shallow water pipelay job in combina-tion with the installation of an SPM system. This project involves a new SPM system with associated pipeline works for the client S-oil and Daewoo E&C (70%) and Posco Engineering (30%). The project location is the Port of Onson, close to Ulsan on the southeast coast of Korea. Van Oord will mobilise a trailing suction hopper dredger to perform pre-trenching works prior to the shallow pipelay works that will be executed by the Stingray. The pipelaying works consist of the installation of a 3200 m, 42 inch pipeline, and are expected to be completed at the end of Q2, 2013.During the past few years Van Oord has executed several projects including the installation of pipelines and mooring systems, as part of EPC
contracts. Projects of note include the Midia Marine Terminal in Romania, the offshore facilities for the Abu Dhabi Crude Oil Pipeline, UAE, and more recently, the installation of an SPM and subsea pipeline for a power plant in Fujairah, UAE. For the latter two projects, the installation of the pipelines was carried out by the bottom pull method, entailing the pull of pre-fabricated pipeline strings from the shore with the aid of winches oper-ated from a pontoon located offshore.
Future outlookWith the successful completion of these projects and the addition of the Stingray to the fleet, Van Oord can establish a name as a fully-fledged shallow water pipeline installation contractor, able to offer different types of installation methods to meet specific project and client needs.The market is ready for it. This is further confirmed by the fact that on March 1, 2013, Van Oord signed a second contract which also involves a new SPM system with associated pipeline works. Awarded by the state-owned petroleum, natural gas and gasoline company CPC Corporation from Taiwan, a 4.6 km long and 42 inch pipeline has to be installed near Taoyuan in Taiwan at a maximum
water depth of 40 m.Maurice de Kok concluded by saying: “The offshore industry works with a slightly longer lead time than the dredging industry, but I can reveal that there are plenty more projects in the pipeline. We have our fingers in a great many pies for 2014 and 2015, and we are already at the negotiating table with a number of customers, for new contracts. These positive develop-ments confirm that the purchase of the Stingray and our decision to take on the role of EPC contractor were the right steps in securing the future of Van Oord. At the same time, we remain duly cautious. As a newcomer in the field of pipelaying, we are now in the process of building up a track record, and in that process trust is a very important issue. As the saying goes, reputations are hard won but easily lost. Against that background, we will not be taking on any work we are not sure we can successfully conclude either in terms of technical requirements or planning. All the pieces of the puzzle need to fit together as smoothly as possible. People may find us some-what traditional in our approach, but at the end of the day, Van Oord has just one goal in mind: continuing to provide our customers optimum service, for many years to come.”
‘We are now in the
process of building up
a track record, and in
that process trust is a
very important issue.’
Maurice de Kok, Area Manager
Offshore Pipeline Installation.
The prime focus for the Stingray
is pipelaying works in combination
with shore approaches in shallow
water from shore to - 50 m.
HydrauRent offers Hydraulic winches up to 80 tons with Constant Tension!
Hydraulic winches in the range 2-80 tons
Standard, full option Constant Tension and
hoisting winches
Synchronising module for winches and control cabinets
Compact design, mostly in offshore proof hoisting frame
Installed and commissioned by professional engineers
And also available for rent:Diesel- and electrically driven hydraulic powerpacks
up to 800 kW
Filtration-, flushing-, cooling and dewater units for
hydraulic systems
Expertise
Added value
Solution
Reliability
Rent your Hydraulics!
www.hydraurent.com
S Y NCH RON ISED
WINCHESF O R R E N T
Hydrau_Adv_OffshoreHolland_210x297_HW_bg 26-02-13 12:42 Pagina 1
10 2013
With 20 yards worldwide, Keppel Offshore & Marine (Keppel O&M) believes in its ‘Near Market, Near Customer strategy’, catering directly to customer needs and contributing to local content. Keppel Verolme is testament to the effectiveness of this strategy. Located in Rotterdam, the Netherlands, Keppel Verolme has grown to become Europe’s trusted offshore and marine solutions partner.
Provider of choiceKeppel Verolme: poised for continued growth into the future
In drydock DCV Balder, alongside the semi-
submersible drilling rig Scarabeo 6 and in the
background the crane vessel Saipem 7000.
112013
Equipped with a versatile and highly skilled workforce, Keppel Verolme’s work includes dry-docking, repair and maintenance, modification, conversion and construction of various vessel types. Adding to its track record, the yard welcomed three of the world’s largest crane vessels into its dry-dock in 2012.
World’s largest crane vesselsThe first project was for Heerema Marine Contractors (HMC), for a life extension of the Deepwater Construction Vessel (DCV) Thialf. DCV Balder followed after, with both vessels undergoing a thorough inspection, maintenance and repair works.Shortly after Balder had left the yard, Italian customer Saipem sent its semisubmersible Saipem 7000 for an overhaul of its thrusters and paint work. Its arrival was accompanied by the Scarabeo 6, a Saipem drilling rig requiring extensive maintenance and repair.
Scarabeo 6 spent half a year in the drydock, upgrading its drilling capabilities, prefabricating and installing two outer sponsons, extending its deck extensions and other upgrading work. The vessel left the yard on 2 December 2012, with highly satisfied owners, Saipem.
Keppel Verolme continues to strive to exceed customer needs, delivering projects to its global clientele safely, on time and within budget. Harold Linssen, Managing Director of Keppel Verolme, said: “Keppel Verolme is pleased to be able to service our repeat customers Heerema Marine Contractors and Saipem once again with safe and quality project deliveries.”
Repeat customersFor its commitment to quality and
value-added services, Keppel Verolme sees many of its customers return to Rotterdam. Recently the yard secured a second major job from Stena Drilling for the upgrade of semisubmersible drilling rig Stena Spey. It will undergo a Special Periodical Survey (SPS) & upgrade. Expected to be delivered in 2Q 2013, the rig will be deployed to the North Sea.
The yard’s work scope for this projects includes dry-docking and the installation of a new crane, helideck and accommodation module. Existing accommodation facilities will also be upgraded while the rig undergoes its regular maintenance works and a painting program.
In 2010, the yard carried out another project for Stena Drilling – the repair
and maintenance of a 33,000 dead-weight tonne dynamically positioned drilling semi-submersible Stena Don.
Steel solid deliveryWork for yet another valued customer, Noble Drilling, was done by Keppel Verolme in July 2012. The jack up rig Noble Byron Welliver was jacked a couple of meters to allow inspection of the top of the spud cans and the leg connection. In the same period, Keppel Verolme carried out several steel repairs and a painting programme on the rig. For a job well done, Noble Drilling increased the work scope of Keppel Verolme with a contract to prefabricate and commission the steel portions of the jack up’s legs. The project is currently underway with the installation of these parts scheduled in April 2013.
Undocking of the Saipem 7000.
12 2013
New frontiersBearing testament to Keppel’s range of offshore solutions for the European offshore wind energy sector, Seafox 5, the world’s largest multi-purpose offshore wind turbine installer, was delivered to the Seafox Group in 2012.
The vessel, build at Keppel FELS, is able to operate in harsh environ-ments and up to 65 meters in water depth - the deepest for such vessels - as well as carry a wide variety of foundations and turbines. The vessel visited the Keppel Verolme yard briefly before service.
Chartered to the joint-venture company Aarsleff Bilfinger Berger (ABJV) Dan Tysk, Seafox 5 will install offshore wind foundations in the 288 megawatt (MW) Dan Tysk wind farm in the German Sector of the North Sea.
With the growing offshore activities in the European wind industry, Keppel Verolme provides full service, (e.g. maintenance and mobilization) to owner of this type of vessels.
Innovative solutionsKeppel Verolme has been contracted by Singapore based company Ezion Exerter to dismantle and segregate the jack up rig Prime Exerter. The purpose is to enter the Caspian Sea area in order to execute a drilling contract. In addition, repair, maintenance and upgrade works is being performed.
The Prime Exerter, formerly known as Energy Exerter, arrived at the Keppel Verolme yard in February 2012. The rig was bought by Ezion in October 2012 and renamed. The rig need to pass the Volga-Don canal in order to enter the Caspian Sea. This canal has 17 meter wide locks, which is one of the main criteria for the segregation plan.
Keppel Verolme started with removal and dismantling the 1125 tonnes cantilever and drill floor. Currently Keppel Verolme is removing the legs, which is done by a sheerleg with extended boom. The rig is jacked down on three connected, 16.5 meter wide barges which are suitable to carry the segregated parts into the Caspian Sea.
ConclusionWith a longstanding tradition of high quality execution and delivery, Keppel Verolme continues to strive to meet customer needs and deliver projects safely, on time and within budget.
Leveraging Keppel O&M’s strengths in technology and project execution, Keppel Verolme is poised for continued growth into the future, offering innovative and cost-effective solutions for the offshore industry.
‘Keppel Verolme is
testament to the
effectiveness of the
‘Near Market, Near
Customer strategy’
Keppel O&M
believes in.’
Removal of a leg part of the
jack up rig Prime Exerter.
132013
The Dagny jacket will be the largest launch jacket ever to be constructed at HFG’s Vlissingen fabrication facility. Heerema Vlissingen will start the fabrication of this challenging and record breaking jacket in November 2013 with a planned delivery in April 2015. The jacket will be approximately 142 metres tall with a footprint of 60 x 50 metres and a top of 40 x 30 metres. The pre-drilling wellhead deck of 14 x 14 x 4 metres, will accommodate the phased development of the Dagny field and will eventually be integrated into the topsides cellar deck.
“This assignment will expand once more the design and fabrication capacities of our organisation, after the successful and challenging Statoil Valemon jacket project completed last year,” says Tino Vinkesteijn,
CCO Heerema Fabrication Group. The Vlissingen facility is currently fabricating four jackets, until the 2nd quarter of 2015. According to VP Technology Cees Spaans of HFG: “Based on the various FEED concepts developed by HFG Engineering, varying from lift jacket to launch jacket, Statoil selected the launch concept. The fact that following this FEED study we have been awarded the EPC contract for the Dagny jacket after the successful Valemon jacket execution in 2011-2013, proves that our fabrication-driven engineering approach is the right direction.”
Remco van Gilst, Senior Vice President Commercial of Heerema Fabrication Group, comments: “Being awarded an EPC contract of this magnitude,
demonstrates the confidence of our client Statoil in our capabilities and the relationship development during the recent execution of the Valemon jacket project. We are looking forward to working again with Statoil on this challenging project and to successfully integrate the interface management in order to accommodate the pre- drilling phase.”
Artist impression of the Dagny jacket.
Early February this year Heerema Fabrication Group’s Vlissingen yard in the Netherlands signed the Letter of Award with Statoil for the Engineering, Procurement and Construction of a 16,000 tons launch jacket and a pre-drilling module of 155 tons for the Dagny field development in the central part of the North Sea.
Allseas, the global leader in offshore pipe-line installation and subsea construction, has signed for the delivery of a supply chain forwarding portal by logistics software supplier Yellow Star Solutions, based in Barendrecht, Holland. The system must assist Allseas to centrally manage their logistics processes.
The supply chain forwarding system is a tailor-made solution for production companies in the offshore sector. The application is an integrated addition to the Oracle ERP system, which Allseas already works with. An ERP traditionally supports financial, purchasing, sales and manufacturing processes in a good way. With the addition of the Yellow Star-application, Allseas can now also control its logistics processes efficiently and centrally (while maintaining local flexibility). Allseas transports a large amount of supply, maintenance and project equipment from and towards its offshore installation vessels. The complex logistics to organize these activities efficiently is characterized by a great need for flexibility, a lot of urgent orders and high time
pressure. Regular shipments are transported with containers, while rush orders are often transported with trucks, vessels, planes and even helicopters. For coordinating these various transports in an efficient and pro-active way, Allseas went looking for a logistics addition to its Oracle ERP system. The supply chain forwarding portal of Yellow Star was chosen after a thorough selection.According to Allseas the application will become thé central portal for generating and storing all logistic documents. The purpose of the application is to consolidate all shipments efficiently from 1 central system. Via the integrated tracking & tracing option, everyone has real time, 24/7 and anywhere on the entire globe access to the transport status and the location of all goods. Every employee has access to all transportation-related documents. This results in less unnecessary communication.
Pipelay
installation
vessel
Solitaire.
Dagny jacket awarded to HFG
Real time insight into logistics process
14 2013
Large numbers of new building programmes on the stocks
Vroon Offshore Services responds to customer’s wishes
He is responsible for and in charge of the activities of Vroon Offshore Services as undertaken on the North Sea, from offices in Aberdeen and Den Helder. Having first established the VOS organisation in Aberdeen, Scotland, starting in 2009, the 46 year-old Jan-Piet Baars arrived in Den Helder, the Netherlands, at the start of this year. Vroon is the largest service provider in the Netherlands in the market for offshore support vessels.
Artist’s impression of ERRVs/FSVs, ten
of which are currently being fabricated
in China (illustration: VOS).
152013
Jan-Piet Baars first joined Vroon in 2009. “My first assignment was to establish the VOS organisation in Aberdeen, and strengthen Vroon’s market position. With a fleet of around fifty emergency response and rescue vessels (ERRVs), the scale of the Vroon organisation and the diversity of its customers can both be described as considerable. I also concentrated on the further develop-ment of the ERRV product itself, by determining how further added value could be provided to the users. Possibilities include ERRVs with a cargo carrying capacity and ERRVs equipped with daughter craft or auxiliary craft, therefore capable of simultaneously covering a number of different locations. We describe these vessels as field support vessels (FSVs). Other possibilities include ERRVs with greater engine capacity and a winch, capable of offering tanker assistance, for FPSOs. Vessels of this type are described as tanker assist vessels (TAVs).” To modernise and expand the fleet operating from Aberdeen, a major new building
programme was undertaken between 2007 and 2011. The programme involved a total of fifteen new ERRVs of the types IMT955 and IMT955L, all of which were fabricated at the Zamakona Pasaia yard in Spain. The next new building programme for a further six ERRVs and four FSVs has since been initiated, in China.
Three segmentsWhile the main focus of the activities in Aberdeen, Scotland is on the deployment of ERRVs/FSVs in British waters, the vessels operating from Den Helder in the Netherlands operate in three different market segments. Jan-Piet Baars continued: “From our offices in Den Helder, in addition to emergency rescue and response activities in the Dutch sector, we also provide platform supply services and subsea support throughout the whole of Northwestern Europe. In total, some fifteen vessels are involved. The platform supply vessels (PSVs) we deploy on the Dutch market are active in the Southern North Sea (SNS) Pool. A number of our other PSVs are
deployed on behalf of BP, while we are also active on the spot market.”In 2013, the subsea support vessel (SSV) VOS Shine was added to the fleet. “This vessel has been chartered by Bluestream Offshore, specialists in the provision of Diving, ROV and Rope Access Services, who will be employing the vessel in the German sector of the North Sea to provide assistance in the laying of cables for a new wind farm. Our aim is to expand our position in the segment of subsea support in relatively shallow water. Demand in this segment for efficient and modern vessels is clearly growing. The VOS Shine and its sister ship VOS Sweet are ideal for this segment. Both are capable of carrying out a range of activities in addition to diving support, for example construction and ROV support work. We intend to also examine the segment of the subsea support sector beyond the capabilities of the VOS Shine and VOS Sweet. This sector is served by slightly larger dive support vessels (DSVs) suitable for deployment both in the renewable energy and the oil and gas market.
‘At the Nanjing yard,
six ERRVs are under
construction, each
with a length of
50 metres.’
Managing director Jan-Piet Baars is
responsible for the VOS organisation
in Den Helder and Aberdeen
(photograph: VOS).
16 2013
The experience we are currently acquiring with our new SSVs will enable us to achieve future successes in that larger segment both in terms of vessels and in particular in our support activities. In addition, however, we of course also intend to continue investing in our PSV product, based on our expectations of further growth in that segment, by responding even better to the wishes of our customers.”
New buildingBoth for further growth and to replace the older tonnage from the fleet operating from Aberdeen, a series of six ERRVs and four FSVs is currently being fabricated in China. “At the Nanjing yard, six ERRVs are under construction, each with a length of 50 metres, and all with daughter craft capabilities. In addition, four 60 metre-long FSVs with cargo carrying capacity are being fabricated at the Fujian yard. These vessels are a response to the increasing demands from operators wishing to work with ERRVs that also offer load carrying
capacity. All ten vessels will be deployed on the North Sea, and will be operated from Aberdeen.”
The first ship in the new series is due to be handed over by the Nanjing yard in April/May 2013. The new ERRV class is a design from our own drawing board, based on experiences accrued with the ERRVs that joined our fleet in 2007.
As part of the fabrication of these new vessels, an order was also placed for the fabrication of a series of special rescue vessels, so-called daughter craft (DCs) and fast rescue craft (FRCs).
Genoa and SingaporeAlongside activities in Northwestern European waters, Vroon Offshore Services are also highly active in other parts of the world. As explained by Jan-Piet Baars: “We have our own offices in Genoa (Italy) and in Singapore. From Genoa, we mainly serve the Italian domestic market, the Mediterranean Sea and North
Africa, by providing supply vessels (PSVs) and anchor handling tug supply (AHTS) vessels. Our ships are for example active in the waters of Italy, Egypt, Israel and Libya.”
“For us, this is an emerging market, where we operate some twelve vessels. The eastern section of the Mediterranean Sea and the North African market are in fact highly segmented, and local in nature. The same applies to Southeast Asia, a market which for us extends from the Bay of Bengal right through to Western Australia, where we mainly work with anchor handling tug supply vessels. The type of vessel deployed in these waters is approximately 60 metres long and delivers a bollard pull of 65 tonnes. We have had approximately 25 vessels of this type fabricated at the Fujian yard. Eight of these are operated from Genoa, while the vast majority are based in Singapore. We are in fact now considering the fabrication of the next generation of these vessels which could in the future be deployed off the coast of Western Australia.”
VOS mainly deploys
anchor handling
tugs supply vessels,
including the VOS
Ares, in the waters
of Southeast Asia
(photograph: VOS).
ODD PAGES
18 2013
Jumbo’s innovative concept, ‘Lift. Ship. Install. All in one go.’ is proving extremely efficient and is popular with its clients. This helped Jumbo building up a solid and reliable reputation as a combined transport and installation contractor in the offshore industry. Now Jumbo Offshore is moving a step up, being awarded two ‘game changing projects’ for 2013.
Jumbo Offshore is raising the bar
Two ‘game changing projects’ for 2013
192013
Jumbo has been awarded a FPSO mooring spread installation, tow out and hook-up contract by EnQuest. EnQuest is the largest independent oil & gas development and production company in the UK North Sea and is redeveloping the Alma and Galia fields. For the EnQuest project Jumbo will act as the main contractor, a well considered step in the development of Jumbo’s Offshore division.
The Alma and Galia fields are located in Blocks 30/24, 30/25 and 30/29, 310km south-east of Aberdeen in the UK North Sea. The fields will be brought on stream in 2013 using the FPSO vessel ‘EnQuest Producer’, formerly known as the ‘Uisge Gorm’. This FPSO is currently under refurbishment at a repair yard in Hamburg, Germany.
Mooring installationBeing the main contractor for this project Jumbo will install the nine anchor piles with a length up to 40 m and a diameter of 84 inch. The anchor piles are fabricated under Jumbo’s responsibility. The bottom chain is
connected to the anchor piles and will be installed and pre-tensioned during Jumbo first voyage to the offshore field. During the second voyage Jumbo installs the spiral strand wire (9x 1150 m) and the top chain (9x 715 m).
FPSO tow out and hook-upJumbo awarded the FPSO tow out and hook-up scope to contractor Boskalis Offshore. They will tow the refurbished FPSO from the yard in Hamburg to the offshore field. There Boskalis will connect the mooring legs to the EnQuest Producer and execute the final tensioning.
First timeJumbo’s Heavy Lift Vessel Fairplayer will execute the installation of the mooring spread in just two voyages, utilizing her enormous hold, onboard 900t mast cranes and Dynamic Positioning System (DP2) to ensure station keeping during installation activities. This is the first time a HLV will execute the complete mooring installation, including the pre-tensioning of the anchors and bottom chain. The mooring installation will take place in the second quarter of 2013. At the time of writing Jumbo is conducting engineering and preparation works.
Jumbo enters BrazilAnother first timer for Jumbo is the award of the contract for the load-out, transport and offshore hand-over of
piles, tendons and temporary buoyancy modules for the Papa Terra project offshore Brazil. Jumbo is awarded the project by McDermott and will be executing the offshore hand-over of the equipment to McDermott’s DB50.
Scope of work
The scope of work on this project performed by Jumbo consists all of the engineering and project management for the load-out and offshore hand-over of eight anchor piles, eight Temporary Buoyancy Modules and 128 tendon sections. Jumbo is also responsible for the design and fabrication of grillages, seafastenings, hang-off points and other handling devices. The equipment will be loaded on Jumbo’s DP2 vessels Fairplayer and Jumbo Javelin and transported
FPSO EnQuest Producer.
Special engineered seafastening in the
hold of Jumbo’s J-Class vessel.
Artist impression of offshore hand-over of equipment from the Fairplayer to the DB 50.
The Alma and Galia field development.
20 2013
to the Papa Terra field. At the offshore location Jumbo will overboard, up-end and hand-over the anchor piles, tendon sections and TBM’s to McDermott’s Derrick Barge 50.
Papa Terra oil field
Petrobras, together with its partner Chevron, is developing the Papa Terra oil field, located in Block BC-20 of the Campos Basin, Brazil. Papa Terra is the first use of dry-tree floating
technology offshore Brazil and the first Tension Leg Platform installation offshore South America. The field is being developed with both wet completion and dry production wells. The dry wells will be connected to a Tension Leg Wellhead Platform (TLWP) called P-61. Jumbo will execute its scope in the fourth quarter of 2013.
Intervention serviceAt the time of writing this article (March 2013), Jumbo is preparing the deployment of five subsea structures for PetroSA’s Ikhwezi project. The structures weighing up to 185t need to be deployed to a water depth of 160m offshore South Africa, where weather and sea states are getting hostile due to the approaching winter. Jumbo was awarded this project on an intervention basis and only had five
weeks to complete the preparations and execute the deployment of the five structures. This once again proves Jumbo’s flexibility both onshore (engineering and project management) and offshore (project execution).
Challenging projectsJumbo Offshore continues to stretch itself with new and challenging projects. So far 2013 is an exciting year for Jumbo’s offshore division, delivering efficient and pioneering offshore installation services, including: •Installation of a mooring spread
with driven piles offshore the UK;•Offshore hand-over of piles, tendons
and TBM to an installation vessel offshore Brazil;
•Installation of subsea structures offshore South Africa.
Mobilisation of the Deepwater
Deployment System for the PetroSa
Ikhwezi project and EnQuest project.
Petrobras is developing the Papa Terra oil field.
Jumbo is preparing
the deployment
of five subsea
structures for
PetroSA’s
Ikhwezi project.
212013
The typical Damen design philosophy, featuring values like safety, function-ality, standardisation, modularisation, ease of maintenance and overall quality, can also be found in the AHTS 200. An extensive research analysis was executed on hull optimization, sea keeping qualities, noise and vibration reduction, fuel oil consumption reduction, changing rules and regulations and client-needs and lessons-learned from other Damen designs.
The AHTS 200 includes a new and innovative winch arrangement which is quite decisive for the overall dimensions and layout of the vessel. The electrically driven winches may be considered an innovative approach, as the market is traditionally dominated by low-pressure hydraulics.
The electrical-drive winches provide a clean, green, economical, functional
Damen Shipyards Group introduces its newly designed AHTS 200, a versatile deepwater Anchor Handling Tug Supplier able to operate in water depths in excess of 3,000 m. Following the company’s ambitions to increase its market share in the offshore industry, Damen heavily invests in designing state of the art vessels for several offshore sub-markets, noticeably the Offshore Support, Offshore Wind, (Seismic) Research and Transport & Installation industries. Backed by ample R&D and engineering capacity, its own construction yards, specialized partner yards and a rapid expanding service organisation, Damen feels confident that the chosen approach will be successful.
New Anchor Handler design
As from early February this year Damen Shipyards Group is the new owner of Dutch ship repair yard Shipdock, with operating facilities in Amsterdam and Harlingen. The yard will continue its ship repair and conversion services, with Shipdock Harlingen servicing ships up to 120 m and Shipdock Amsterdam servicing vessels up to 250 m. Furthermore, its personnel and management will remain in place, guaranteeing a seamless transition of the yard into the Damen Shipyards Group.
René Berkvens, CEO Damen Shipyards Group, says: “The Shipdock yards bring added value to Damen, both separately in their own markets and regions and as a whole – together they have ample experience in shipbuilding, ship repair, conversion and steel construction. Damen is an established player in the ship repair industry and we are determined to become even better. That’s why we’ve recently founded a new
division, Damen Shiprepair & Conversion, in which all our repair yards will be represented and organised efficiently.”
Operating facilities of Shipdock Amsterdam.
Damen Shipyards Group acquires Shipdock
and safe solution for the anticipated operations.
Artist impression of the Damen AHTS 200.
22 2013
Originally established in 1966 as a design firm for mechanical and electrical installations and cable network systems, the Netherlands-based Selmers B.V. has since developed into a leading designer and supplier of complete pipe coating plants and pipe handling equipment. In the field of coating based on its 3-layer pipe coating technology, the company is in fact world market leader in the onshore market segment. The ever ambitious Selmers is currently well on the way to acquiring a leading position in the offshore sector, too.
Market leader in pipe coating equipment
Netherlands-based Selmers B.V.
The supervising of a
concrete coating process.
232013
“We design and build process lines and machines for the blasting and coating of steel pipes that are subsequently used by various players, including the oil and gas industry,” explained Sales Manager Bart Appelman. “Each machine or production line that leaves our factory is in principle custom-made. Our added value lies in the fact that based on a flexible standard product, we are able to respond efficiently to the specific wishes of our clients. We also produce a wide range of transport systems for moving and positioning of pipes, so that they can be welded together. We have for example produced a pipe lift consisting of a total of eight units, that brings welded joints - with a total length of 72 metres - to another level, at which point they are taken up by the J-lay tower. Based on a combination of knowledge and experience, we are able to offer our worldwide circle of customers total solutions in which we
take full responsibility for the design, technology, fabrication, transport, assembly and commissioning of the process line/machine.
Every element of mechanical, hydraulic and electrical engineering is executed in house. Over the years, we have developed our own ERP package capable of efficiently and flexibly supervising the entire process. As a result, we are able to precisely match the engineering package to a range of standard and special components in our product database.”
To maintain and indeed expand its leading position in this high-end, high-tech sector, Selmers itself is permanently involved in innovation. By investing in people and equipment, the company is constantly striving to raise the level of its performance even further. Appelman continued: “We have our own Research & Innovation department where the
staff are focused fully on current and future trends in the coating market. Selmers is always ready to take the next step in quality improvement!”
PromisingSelmers first came into contact with the pipe coating sector in the early nineteen seventies. During this period, a large volume of exclusive engineering work was carried out on behalf of the world-renowned pipe coating company Bredero Price. When Bredero Price moved out of the Netherlands in the early nineteen eighties, Selmers decided to continue in the pipe coating sector. “In that period we shifted our entire focus to installations for applying internal and external coatings to pipes for oil, gas or water, as well as the full range of pipe handling equipment needed for transporting the pipes through the coating plant or across the deck of a pipe lay vessel,” explained Eline van Beek, Sales Applications Engineer.
Selmers has developed and
manufactured equipment for
practically all major players.
24 2013
“In the beginning, we were limited to engineering work, but at a later stage we actually started building the equipment for pipe coating plants, ourselves.” The first contracts came from Germany and Russia, exclusively for onshore activities within the pipe manufacturing industry.”
Appelman added: “A substantial proportion of our customers operate exclusively onshore. These are pipe manufacturers who have reached the conclusion that merely selling steel pipes offers no added value. In addition to pipe mills, many of them nowadays also operate a coating plant enabling them to deliver complete products. Examples of such customers are Salzgitter, Mannesmann and British Steel.”
“The second onshore group comprises independent coating companies who, when contracted to lay pipelines of 100 kilometres or more, sometime install a complete in situ pipe coating plant. For such projects, we have
supplied plants worldwide to locations including Russia, the Middle East, Nigeria, Turkey and Venezuela.”
“It was not until 1985 that we supplied our first offshore equipment, in the form of melt kettles for marine mastic, to Allseas. This substance was used for filling field joints on offshore pipelines. Nowadays approximately 80% of the company’s systems are deployed onshore and the remaining 20% offshore, making Selmers a renowned name all around the world.”
As Sales Manager Appelman continued: “We have now on occasion developed and manufactured equipment for practically all the major players including for instance Subsea 7, Technip and Heerema.”
“Over the coming years, we foresee sufficient possibilities to contribute to our market. These expectations are readily confirmed by an already healthy order portfolio. In that respect, at least we have suffered little from the general economic crisis.”
‘Selmers is
always ready
to take the
next step
in quality
improvement’
Sales Manager,
Bart Appelman
Installation of a field
joint blasting device.
At Selmers every
element of
mechanical,
hydraulic, electrical
and software
engineering is
executed in house.
Jumbo Offshore transports and installs heavy
subsea structures and mooring systems in water
depths up to 3,000m. Lifting capacity on our DP2
vessels is achieved with two 900t mast cranes.
Versatility is enhanced with the addition of
dedicated project equipment such as deep sea
winches, heave compensation devices and pile
driving hammers.
Over the last 10 years Jumbo has built up a solid
and reliable reputation as a safe transport and
offshore installation contractor. Our concept
“Lift. Ship. Install. All in one go.” continues to
provide an extremely effi cient solution.
www.jumbomaritime.nl
Lift. Ship. Install. All in one go!
BRINGING DISCIPLINES TOGETHERBRINGING DISCIPLINES TOGETHER
Innovations in offshore & marine
www.kci.nlDesign of:Platforms | Subsea infrastructure | Complex structures
26 2013
The reason for Huisman based in Sliedrecht to design a drilling ship for use in the Arctic area is to ensure that the expected imminent demand for innovative drilling vessels of this type can be met as quickly as possible. Some time ago, Huisman initiated work on the design of the JBF Arctic. A great deal of time has been invested in the design, and model tests have already been undertaken at the Krylov Shipbuilding Research Institute (KSRI) in Saint Petersburg, Russia.
Anchor systemStudies were previously undertaken within Huisman to generate measurement data that could be used for the design of the anchor systems. The systems comprise twenty lines produced from a combination of very strong polyester wires and steel chains with at the end an anchor linking the vessel to the seabed. Initially, Huisman had restricted its research to carrying out mainly static calculations (with only constant forces). The TU Delft student Keijdener then came onto the scene. “My thesis is all about the addition of fluctuating forces, the dynamic behaviour of the ice forces and the resultant movements of the vessel itself. All this information had to be charted out, in order to come up with a more optimised and more realistic design for the anchor system.”The second objective of his thesis was to design an anchor system for
the JBF Arctic, to allow the vessel to cope with semi-sub extreme ice conditions, in other words a layer of ice approximately 3 metres thick.
ChallengeAs Keijdener himself explained: “The greatest challenge was to use data measured at specific ice thicknesses, ice speeds and angles of rotation of the vessel to build a model capable of predicting the ice forces in real time, for every conceivable combination of ice thickness/speed and position/rotation of the vessel. A key aspect was first gaining an understanding of the fracturing behaviour of the ice. Ice can after all fail through bending or high pressure (crushing) whereby crushing results in far higher forces on the vessel and therefore must be avoided. Against that background, it was essential to check whether the ice was in fact only being broken by the application of bending forces. Bending occurs if the ice is forced against angled sections of the ship’s skin while crushing occurs if the ice is forced against vertical sections of the skin. The geometry of the ship around the depth used in the interaction with ice is reproduced in figure 1. This geometry is fairly complex, and contains both angled and vertical sections. Depending on the angle of rotation of the vessel, interaction can occur with the angled, the vertical
or a combination of both sections. See the top right photograph.”
Keijdener subsequently used the characteristics of the geometry for interpolating between the data points of the model test, in other words for predicting the ice forces for the combination of ice thickness/speed/rotation of the vessel, which were not investigated during the model testing. Keijdener continued: “By deriving a formula capable of calculating the distribution of the interaction with angled and vertical sections of the vessel, I was able to interpolate between the forces from the model tests so that the ice forces could be calculated for any random angle. I then further developed the computer model, to make it possible to also interpolate for a range of ice thicknesses and ice speeds, so that the force can now be predicted for all non-implemented combinations. Finally, the initial phase of the interaction was added, whereby the forces gradually build up because the ice rubble has by that point not assumed its definitive volume. Once this had been completed, it was possible to calculate the constant component of the ice force, but since the dynamic behaviour was also important, it was also essential to be able to calculate the fluctuating component of the force.”
The design of a drilling ship for the Arctic area by Huisman, the leading Dutch innovator, has once again been brought several steps closer to realisation. The ship will require an anchor system with which ice of up to 3.1 metres thick can be broken. Dutch student Chris Keijdener produced a computer model for the overall system, as part of his graduation from the TU Delft.
Drilling ship for Arctic area
Dutch student produces computer model
272013
SpectrumFor the fluctuating component, Keijdener examined the frequencies present in the force data, but the spectrum revealed no specific frequencies. Equally, not all the spectrums demonstrated a single uniform shape. “In the end, we decided to assume that the energy had a uniform distribution across all frequencies, whereby the volume of energy was calculated from the model test data. Following rounding off of the constant and fluctuating components, time-domain simulations were undertaken, to be able to study the response of the vessel to the forces, and hence design the anchor system.”
MatlabFor the design of the anchor system, a so-called Matlab programme was developed responsible for optimising the length of the line and the preten-sioning of the system. Using this programme, the influence of a whole range of parameters was investigated, in order to come up with the optimum design for interaction with ice. The entire study was in fact purely theoretical, with the exception of the model tests.
ConclusionsThe most important conclusion is that the eventual anchor system of 20 anchor lines will be able to handle ice of approximately 3.1 metres in thickness.
It should be noted that neither the anchors nor the required systems in the vessel itself, nor any other practical aspects such as the installation of the systems have yet been examined. A further conclusion is that after the event, the movements of the ship were less than expected. The rotation of the vessel was never so great that crushing occurred, while the dynamic shift in respect of constant shift was reasonably small given the extreme ice forces.
Further research will still be necessary since the majority of tests were carried out with smooth ice. This was sufficient to gain an impression of the handling capability of the ship/anchor system in respect of ice forces and how an anchor system could be designed for a vessel in ice conditions.
However, the disadvantage is that smooth ice rarely if ever occurs in nature,” explained Keijdener. “In reality, there are nearly always ice ridges and icebergs, which both cause such high forces that from a practical point of view, it would be impossible to design an anchor system capable of coping with those forces. That is why research will be needed into ice management, and how ice management can be used to destroy these ridges, so that the eventual forces on the vessel and anchor system are maintained at a far lower level. In this way, the entire combination of ice management and anchor system can be designed so that the required level of safety and operability can be achieved, in an economical manner. One of my fellow students is currently working on these aspects.”
Artist’s impression with the underwater section visible.
The interaction shortly after the model had been withdrawn and
after a test whereby crushing had occurred.
Overview of the JBF Artic.
figure 1.
28 2013
Early March the new Happy Sky was delivered to BigLift Shipping. The vessel is now being fitted with her cranes and will start her maiden voyage at the end of June. Her first four voyages will be for the Cape Lambert port B development.
Happy Star to be expected at the end of 2013
First Happy S delivered to BigLift Shipping
Artist Impression Happy Star.
292013
BigLift Shipping expects the Happy Star at the end of 2013 and after installation of the cranes the vessel will begin her first voyage in April 2014.
These flagships both have lifting capacities of two times 900 mt, combinable to 1,800 mt. The vessels’ length and the forward position of the superstructure offer a single, large cargo hold and an extremely wide, open deck area.
To make sure that BigLift meets the latest market requirements, both vessels’ specifications were changed during the design and construction period. The most important change was the increase of the cranes’ lifting height and outreach and the decision to operate both vessels without a stability pontoon. BigLift considers the use of stability pontoons for vessels of this size a large safety risk in loading and unloading operations and chooses to design vessels who do not need them.
Happy SkyDuring Happy Sky’s construction, BigLift decided to raise the crane pedestals by 4 metres, so that more
lifting height could be created as a reaction to market demand. The cranes can now lift to 41 metres above the main deck.
Happy Sky is equipped with folding hatch covers, a large poop deck and cargo rails which make the vessel’s full deck area available for cargo stowage. The vessel’s tween deck is adjustable in height and she is allowed to sail with open weather deck hatches at a draught of up to 7.5 metres. She also has Finnish/Swedish 1A Ice Class notation. In trials she kept a speed of 17 kn.
Happy StarThe Happy Star too, saw an increase in lifting capacities during the design phase. The crane pedestal was raised by 4 metres and the jib extended with 6 metres, resulting in 10 metres more lifting height and 6 metres more outreach. This makes the vessel’s crane curve unmatched amongst heavy lift vessels.
As a direct consequence of the lifting increase, the vessel’s beam was widened to 29 metres, giving the vessel sufficient anti-heel capacity and stability to use the cranes to their
full capacity of without the need for a stability pontoon during the loading or discharging operations. Her lifting curve ranges from 1,800 mt at 25 metres, 1,600 mt at 28 metres to 1,000 mt at 41 metres, with a lifting height of nearly 47 metres above the main deck.
With the weather deck extending over the full width of the vessel, her load space can used to the utmost. The weather deck hatch covers are pontoon type and bear 15 t/m2. The tweendeck is adjustable in height and Happy Star can sail with open weather deck hatches on a draught of up to 8 metres. The vessel will have Finnish/Swedish 1A Ice Class notation.
The hull was adapted to the new dimensions and special attention was given to optimising the power performance, resulting in a trial speed of 17 kn.
With these features, Happy Star offers unique lifting capabilities for the heavy lift and project cargo market and we are certain we can offer our clients the very safe and reliable transport solution they look for.
Happy Sky after seatrial. Crane curve Happy Star
Allard Europe is a reliable steel and iron foundry making large castings to customer specifi cations. All product castings can be machined in-house. The machine shop is equipped with CNC milling and turning machines with a capacity up to 10m diameter. CAD/CAM software (Unigraphics) adds up to the fl exibility of the company. In recent years Allard-Europe has experienced a dynamic growth based on the implementation of the highest quality standards, flexibility and reliable delivery times. Continuous investments in new technology, production equipment and people will ensure further growth.
www.allard-europe.com
A PARTNERSHIP
FOR THE FUTURE
Allard.indd 1 12-04-13 08:13
www.bakkersliedrecht.com
Bakker Sliedrecht is an innovative electrical system integrator. From design to turnkey installation. On board of high tech ships or offshore applications.We think in an innovative fashion and build all of the systems together. You can rely on us.
Our solution your advantage
Innovative electricalsystem integrator
312013
JourneyThe Big Foot ETLP pushed the Mighty Servant 1 (MS1) to the vessel’s limits. For this project, the deck was enlarged with four outriggers and was opened to re-enforce the internal hull to support the mammoth cargo. “A great deal of engineering was required to ensure a safe and successful transport across the open ocean,” commented Bas Mabélus, Project Manager at Dockwise. The hull was loaded at the Daewoo Shipbuilding & Marine Engineering yard and transported 16,100 nautical miles totalling 60 days.
World’s deepestTechnology advancement continues to push TLPs into deeper water. Tension leg platforms (TLPs) historically have been limited to working in around 5,000 ft (1,524 m) water depth because of the challenges associated with tendon design and installation. The Magnolia TLP is the deepest TLP installation to date at 4,700 ft (1,432 m) water depth. The Big foot TLP will be pushing the boundaries to 5,330 ft (1,615 m) water depth to be the deepest TLP installation.
Dockwise is located in Breda, The Netherlands, and is the world’s largest and most versatile seagoing heavy transport shipping company. Mid March 2013, the company announced that it has safely transported the Chevron-operated Extended Tension Leg Platform (ETLP) hull from Silli-do Island, South Korea around Cape of Good Hope and discharged at Corpus Christi, USA. The mega sized hull will be used for the Big Foot field, considered to be one of the largest and deepest oil discoveries in the Gulf of Mexico.
Dockwise delivers mega sized ETLP hull
Big Foot hull, to be the World’s deepest TLP installation.
Discharge operation.
The ETLP hull was transported from
Silli-do Island, South Korea around Cape
of Good Hope to Corpus Christi, USA.
32 2013
The breakthrough for Siri Marine in the offshore industry came in 2004, when the brand-new, large semi-submersible drilling and production rig Thunder Horse, operated by BP, had to be taken from Far East to the Gulf of Mexico on board the Dockwise heavy transporter Blue Marlin. As Albert Lenting explained: “I installed a number of motion sensors on board the platform. These were able to measure the various accelerations, which in turn made it possible to calculate the angle values such as roll, pitch and yaw, as well as the heave of the vessel. To compare the data from the various sensors we had developed a series of software modules which in turn delivered an indication of deformation and torsion.
On the bridge of the Blue Marlin, a computer and a display were installed from which the captain could easily judge whether the movements of the ship and its costly load were becoming excessive, and if that were the case, whether he needed to reduce speed or change course. For this purpose, he could rely on the decision support guidelines, also drawn up by us. In addition, all this data was stored so as to provide detailed reports at the end of the transport operation. For our new business, established in 2003, this order from BP, undertaken jointly with Dockwise, represented a major breakthrough.”
The motion sensors and accompanying equipment were subsequently
employed in a further series of impressive transport operations, including the transport of the semi-submersible SBX 1 on the Blue Marlin, the Atlantis platform on the Mighty Servant 1, the Shaz Deniz modules on the Mighty Servant 3 and the Blind Faith hull on the Tern. Siri Marine also joined forces not only with Dockwise but a number of other heavy transport operators, and not only for the accurate monitoring of the movements of semi-submersibles, but also of jack-up drilling rigs on board heavy lifters and topsides, a variety of other modules and container cranes on board barges.
Major challengeThe next challenge for the company
How do you measure the movement of a huge, semi-sub-mersible drilling and production installation on board a heavy transport vessel, and what do you do upon approaching the critical values? What do you do when retrieving a jack-up drilling rig, if waves start to exceed a height of one and a half metres? All of these are questions to which Captain Albert Lenting of Siri Marine from Appingedam in the Northern Netherlands has a ready answer. His certainty is based on the use of the motion monitoring systems and decision support guidelines developed in house at Siri Marine.
Outstanding in the sensor market
Siri Marine from Appingedam
For Siri Marine, the transport of the
Thunder Horse platform represented
a breakthrough in the offshore
industry (photo: Dockwise).
332013
emerged in 2006. Albert Lenting continued: “Heerema Marine Contractors had been instructed to install a series of large modules on board an FPSO, with their vessel Thialf, off the coast of Angola; in other words, two massive floating objects both influenced by long ocean swell. On behalf of HMC, we therefore developed sensors to measure and reproduce the relative heave movements between the Thialf and the FPSO.” Siri Marine went on to enhance its reputation in the sea towage and salvage sector and in the project cargo sector, with further applications for motion sensors. A system was even developed for the ro-ro and ferry sectors. This weather-dependent lashing system has now been fitted onto almost fifty vessels.
Siri Marine is currently undertaking a remarkable project in the waters of Malaysia and Indonesia. “For a number of years I have been working in Malaysian waters carrying out measurements on a jack-up rig which has been converted into a production platform or mobile offshore production unit. This project involves the long-term measurement of the inclination, aimed at determining whether or not the
platform is subject to settlement. All measurement data are carefully stored and precisely analysed. The same data can also be used for registering fatigue, a task we are currently undertaking for four customers who operate MOPUs in the waters of Malaysia and Indonesia. Combined with the information from a weather agency, the data thus collected on the environmental impact on the platform can be registered, and subsequently integrated in the fatigue calculations.” Using its own sensors, Siri Marine has also carried out measurements during the installation of a number of mono tower platforms on the North Sea as well as taking measurements on all the mono tower platforms and wind turbines installed in the region.
New assignmentThis year, the Appingedam-based company was set the assignment by Seadrill of installing complete motion monitoring systems on four jack-up drilling rigs currently under construction, two at the Jurong yard in Singapore and two at the Dalian yard in South Korea. “During rig moves, it is absolutely vital to be able to assess the correct wave height, before
lowering the legs of the rig onto the seabed. Carrying out such an assess-ment by eye is practically impossible, but thanks to our sensors you have all the detailed knowledge you need. As well as motion sensors, a radar system for measuring wave heights, a weather station and a GPS will be installed on the Seadrill rigs, represent-ing a total system capable of delivering a complete information package, thereby guaranteeing that the right decisions are taken during rig moves.” Seadrill has also taken out further options at Siri Marine for the supply of another four monitoring systems.Other true innovations are the recently developed Fast Craft Comfort and Yellow Black Box systems. “For the Fast Craft Comfort systems we make use of the same senor technologies. In this application, however, we can visibly reproduce the impact suffered by passengers on board fast survey and transport craft. The Yellow Black Box has been designed for monitoring transport operations. It is a stand-alone logger which can be placed in a container or on an expensive cargo item, and which then accurately registers all movements during the transport. The system can also be linked to a GPS.
Captain Albert Lenting of Siri
Marine in the workshop, where
the motion monitoring systems
are developed and fabricated.
The Yellow Black Box
is a special system for
monitoring transport
operations.
34 2013
The range of vessels consists of: the IHC Packhorse which has been positioned as a platform support vessel (PSV); and the IHC Packhorse-Maxi, which is a variant on the basic
hull form, providing a 59-person accommodation unit and a range of options designed for subsea supporton IRM work, light construction and cablelaying projects. IHC Merwede
offers the portable equipment for the IHC Packhorse-Maxi, either as an in-house supply package or as specified by customers, depending on their preference.
New IHC Packhorse offshore support vessels
IHC Merwede has extended its product range
IHC Merwede has extended its product range with the introduction of a new series of IHCPackhorse offshore support vessels at an official launch event in Singapore, organised by IHC Asia Pacific, a subsidiary of IHC Merwede. This latest development reinforces thecompany’s internationalisation strategy, which aims to provide a choice of designs and build locations to its customers on a global basis.
AgreementThe new IHC Packhorse range will initially be built through the cooperation agreement established between IHC Merwede and Jaya Holdings. Jaya Holdings CEO, Venkatraman Sheshashayee, says: “We welcome the launch of the IHC Packhorse as another key step forward in our ongoing cooperation with IHC Merwede. This is an exciting development in the market to offer vessels built with European quality at Asian prices.”
Volume marketIHC Merwede’s President, Govert Hamers, explained that, while IHC Merwede was best known in the offshore sector for innovative custom-built vessels, it had recently extended its product range with the IHC Supporter Class. “This is a cost-effective mid-size vessel, which offers a
reduced build time and flexibility in the selection and configuration of mission equipment by virtue of its modular construction. The IHC Packhorse range represents the first move to extend our product portfolio into the volume market, while continuing to be a dependable partner for offshore operators.”
FeaturesIn its pure-play PSV form, the IHC Packhorse represents a vessel, which has been optimised through discussions with operators and charter companies to meet the needs of deep-drilling and deep-water support. Its main features are a large working deck, a fuel-efficient hull form, optimised power distribution and a flexible tank configuration.
The same platform is used for the IHC Packhorse-Maxi, which has dual-stability books for operation
as a non-SPS PSV at deeper draught. It has also been designed for the easy retrofitting of a heli-deck and is pre-strengthened to accommodate a 100-tonne heavecompensated crane.
The large deck can carry various mission spreads, including diving support, ROV operation and cablelaying, with portable equipment designed and manufactured by IHC Merwede or as specified by the customer. The IHC Packhorse utilises a low-cost highly efficient solution for the power distribution system developed by IHC Drives & Automation (part of IHC Merwede). Portable dive systems and cablelay solutions are available for the IHC Packhorse-Maxi from two of IHC Merwede’s other business units, IHC Hytech and IHC Engineering Business. This ensures the efficient integration of the equipment into the vessel’s operating systems.
HFG starts construction of Montrose BLP topsidesAt the end of last year HFG’s Zwijndrecht fabrication facility signed the contract with Talisman Sinopec Energy for the fabrication of the 8,500 tons Montrose BLP topsides destined for the UK Central North Sea Montrose and Ar-broath field area.
The topsides will have a length of 75 meters, a width of 44 meters and a height of 40 meters. A bridge, optional in the contract, will link the existing Montrose Alpha facility to the new Montrose BLP platform. The ceremonial first cut of steel took place at the end of March at the yard of Heerema Fabrication Group in Zwijndrecht (the Netherlands),
where the topsides will be built. It is expected that the topsides and bridge constructions will be completed for load out in April 2015. The Montrose BLP topsides will be fabricated indoors under controlled conditions, which greatly enhances safety, efficiency and quality of the work. Heerema Zwijndrecht has one of the largest indoor facilities in North West Europe which enable HFG to offer clients these advantages. Wim Matthijssen, Chief Operating Officer of Heerema Fabrication Group said: “Today’s ceremony marks a major milestone in the start of the fabrication of the Montrose BLP
topsides. It is furthermore a privilege for HFG to commence fabrication for a client we have not worked for before and who has the confidence in our capabilities to deliver a high quality product on time, but more importantly safely.” The Montrose field lies in Block 22/17 of the United Kingdom Continental Shelf, 207 km east of Aberdeen in the Central North Sea. Talisman Sinopec Energy’s Montrose BLP is designed to maximise recovery from the existing Montrose field and new subsea developments at Cayley gas and Shaw oil fields.
36 2013
The NG-9000C is primarily intended for the Offshore Wind Turbine Installation (WTI) market. This market has gone through a rapid development over the last ten years. Initially, only small numbers of pilot turbines were installed near the shore, with limited component weights and dimensions. But this market has rapidly evolved into a major new offshore installation market, and this calls for dedicated equipment. In contrast to the typical
oil and gas installation market, with mostly one-off installations, wind turbine installation is characterized by a strongly repetitive character. For example, last year on average over 350 turbines (equaling 1.4 GW) were installed offshore. This is still far below the rate required to meet the offshore renewable targets as set out for 2020 by, for example, the UK, German, and Danish governments.
ReliableThe newest generation turbines have rotor diameters of over 160 m. To install the turbines at an impressive height of 100+ m above still water level, a stable, reliable platform (jack-up) is required, outfitted with a specialized crane. The weight of the modern offshore wind turbine components ranges from 200 t to 500 t and the majority of foundations, depending on size and type, typically range from 500 t to 900 t.
The NG-9000C is a GustoMSC designed self-propelled wind turbine installation jack-up. Three units have been built to the NG-9000C design, two for Fred. Olsen Windcarrier and one for A2SEA. A second unit for A2SEA is currently under construction. Recently, A2SEA received the ‘Offshore Renewables Award’ at the OSJ Conference 2013 for their Sea Installer, the first NG-9000C operated by A2SEA.
NG-9000C wind turbine installation vessel
Multi-purpose self-propelled jack-up
The NG-9000C has proven to be the
primary market choice for its good balance
of cost-efficiency and reliable performance.
372013
Load out portBecause of the size and weight of the wind turbine components, and the associated logistic challenges at port facilities, only a few load out ports are suitable for the transfer of wind turbine components. The challenges relate to space requirements, crane capacity at the quay side, ease of access for the typical installation jack-ups and whether the jack-ups are allowed to bring their legs down to the seabed close to the quay side.
The NG-9000C is outfitted with a 900 t crane, wrapped around the jack-up leg to save precious deck space. In this way, the deck space can be used efficiently for the storage of wind turbine components and the crane outreach can be utilized to its best advantage over the side of the unit in elevated condition.
Self transportThe NG-9000C is designed to carry multiple wind turbine components on board, transport them to the installation site offshore, build up the wind turbine on the pre-installed foundation, move to the next installation site and repeat the installation process until all components from the deck have been installed. Self transport is the preferred method above feeder transport barge with a stationary (on site) installation jack-up. This is mainly driven by the aim to reduce installation time per turbine and reduce the risk per installation (one transfer cycle less), which is increasingly important given the number of turbines to be installed. After transport to site, the NG-9000C brings down the legs to the seabed while keeping position with a state of the art DYNPOS-AUTR dynamic positioning system. Because of the repetitive character, it becomes increasingly important to push the
technical boundaries and with that to optimize the weather window. This means that transport to site, dynamic positioning with the legs almost at the seabed, and afterwards leg bottom impact in the last phase of lowering the legs must be possible in as high a sea state as possible. Currently the threshold for installation in maximum water depth for the NG-9000C for dense sand is a significant wave height of Hs=1.8 m. For favorable headings, wave periods or softer soil, the wave height can be increased upwards slightly.
No ballastingAfter touchdown, the unit jacks with the water just clear of the water surface for a full preload where two diagonally opposed legs are pushed down to the required preload, using the weight of the hull. The NG-9000C is designed so that no ballasting is normally required for preloading and the hull is strong enough to take the shear and torsional loading caused by preloading (almost the entire hull weight resting on two legs, with the other two legs practically only keeping the balance). This diagonal preloading scheme saves precious time compared with the typical preloading operations used in the oil and gas industry, by avoiding the need to transfer enormous amounts of ballast water from one preload tank to the other for the typical 3-legged oil and gas exploration jack-up.
Key ingredientsOnce the soil has been ‘tested’ with the required preload, the NG-9000C jacks up to the required air gap, typically sufficient to survive a 20 m wave. Since the jacking operations typically take place every other day (typical installation scheme per turbine), the envisaged number of jacking operations in the design life is easily a tenfold of what is typical for an oil and gas jack-up. This has imposed extra fatigue requirements on both the hull and jacking system. The NG-9000C has been fully designed and screened for heavy duty operations under extended fatigue conditions.
In elevated condition, the fully revolving 900 t crane, with state of the art controls, efficiently installs the components that are designed to pick up wind. The lift ends at the most critical phase, mating the lifted pieces with the already installed components, at 100+ m above still water level, with delicate components to be assembled with high precision. For this purpose, the stability and reliability of the jack-up platform, combined with maximum control are the key ingredients for safe and efficient installation.
By Andries Hofman, Project Manager
GustoMSC Jack-ups Department.
Fred. Olsen Windcarrier
provides innovative and
tailored services for the
transport, installation, and
maintenance of offshore
wind parks.
38 2013
The oil and gas industry is always pushing boundaries to satisfy the world’s ever-growing energy demands. Most of the production increase needed to meet global energy demand will be realized offshore. Increasingly, operators will invest in deepwater, ultra deepwater and arctic projects. These next-frontier E&P activities demand new technologies to be developed. But they also underscore the growing importance of social responsibility management, including thorough risk management. During Offshore Energy Exhibition & Conference in Amsterdam, The Netherlands there will be ample attention for both the technical and non-technical challenges associated with the industry’s future growth.
Next-frontier E&P projects and the growing importance of social responsibility
Offshore Energy Exhibition & Conference
392013
Changing societal and stakeholder expectations make social responsibility management an integral part of a business’ strategy. Social responsibility – more commonly referred to as HSSE-SR – encompasses the traditional HSE portfolio but also includes considerations of stakeholder management, community relations and procurement / local content. Although these aspects of SR management are typically associated with onshore production environments – think in particular of densely populated areas but also for example remote areas that cross multiple national boundaries – they are becoming increasingly important for offshore projects as well. A calamity offshore can have far-reaching environmental and societal ramifications.
Risk managementNo wonder that in a guest editorial in the March edition of Journal of Petroleum Technology, Roland Moreau of ExxonMobil argues that the pursuit of excellence in social responsibility should be seen as a core value of a company, not just a priority. “Priorities change,” writes Moreau, “values do not.” Recent industry incidents underscore the relevance of HSSE-SR. Moreau, who is the HSSE manager for ExxonMobil Research Company, argues that excellent HSSE-SR is key in earning and maintaining a business’ license to operate and with that, its performance. This makes risk assessment and risk management part of everyone’s job.
The upcoming edition of Offshore Energy Exhibition and Conference on 15 & 16 October 2013 in Amsterdam
will pay particular attention to advances and best practices in risk assessment and risk management. One of the confirmed speakers is Professor Tinka Murk who is currently developing a decision support model which can be applied in response to a calamity involving oil spills at sea. The research project is part of TripleP@Sea, a major research innovation program of Wageningen UR (University and Research centre) into the smart and sustainable use of marine ecosystems. The decision support model should make it possible to choose the best oil spill response (least impact, cost-effective), making use of site-specific information about ecosystems, economic functions, currents and meteorology.
Murk and her team are currently developing a first model taking the Caribbean island of Sint Eustatius as a test site. A biologist and toxicologist by training, Professor Murk is also the linking pin between the TripleP@Sea program and the Dutch participation in the C-IMAGE project. The latter is an international project researching the impact of the Deepwater Horizon spill in the Gulf of Mexico in April 2010. Made possible by a grant from BP / the Gulf of Mexico Research Initiative, the objectives of this research project are to better understand the Deepwater Horizon event, to predict the consequences of another deep-sea blow out in the Gulf of Mexico or elsewhere and to improve the observational and predictive tools available. Murk’s research as part of the TripleP@Sea program can be seen as empirical data collection that complements the monitoring results
Program Offshore Energy 2013
15 & 16 October 2013 Amsterdam RAIThe Netherlands
15 October 2013
09:30 - 10:30Official Opening Offshore Energy 2013
11:00 - 13:00Offshore Energy Industry Panel
10:00 - 18:00 Exhibition opening hours
10:00 - 17:30Offshore Energy Conference
16 October 2013
09:30 - 16:30Exhibition opening hours
10:00 - 15:30Offshore Energy Conference
10:00 - 16:304th Offshore Wind Installation and Maintenance Conference
Admission to the Offshore Energy Exhibition is free of charge. Some conference sessions are ticketed events.
40 2013
Offshore Energy 2013 Committee of Recommendation
Mr. Joep Athmer Area Director, Van Oord OffshoreMrs. Mieke Bakker-Mantjes General Director, Holland Shipbuilding AssociationMr. Kommer Damen Chairman of the Board, Damen Shipyards Group Mr. Sjef van Dooremalen Chairman, Holland Shipbuilding AssociationMr. André Goedée Chief Executive Officer, DockwiseMr. Michael Kahn Managing Director, Jumbo Offshore Mr. Bart van de Leemput Managing Director, NAM Mr. Harold Linssen Managing Director, Keppel VerolmeMr. Arend van Nieuwland Director, Tullow Overseas HoldingsMr. Jaap den Ouden Founder and Member of the Supervisory Board, MerconMr. Martin C.J. van Pernis President KIVI NIRIAMr. Jo Peters Secretary-General, Netherlands Oil and Gas Exploration
and Production AssociationMr. Koen Schuiling Mayor of the City of Den HelderMr. Gerard Schut General Manager, Vice-President of European Operations
Vermilion Energy Inc.Mr. Sander Vergroesen Managing Director, Association of Dutch Suppliers in the
Oil and Gas Industry IROMr. Tino Vinkesteijn Chief Commercial Officer, Heerema Fabrication Group Mr. Ruud Zoon Managing Director, GDF SUEZ E&P Nederland
by the local American partners and contributes to the more conceptual aspects of the C-IMAGE research project. Murk’s research is revealing some interesting interactions of dispersants and oil with plankton that, according to the first research results, may have unexpectedly altered the fate of the oil during the Gulf of Mexico oil spill. Offshore Energy Conference delegates can expect to learn about preliminary research outcomes.
In addition to the industry wide theme of risk assessment and risk management, the two day Offshore Energy Conference program also addresses regional developments, focusing in particular on East-Africa, Latin America and the North Sea region. Running parallel to the exhibition, the two day program offers high caliber panels and short technical sessions addressing develop-ments in offshore hydrocarbons as well as in marine renewable energy. For the first time, the annual Offshore Wind Installation and Maintenance Conference is co-located with
Offshore Energy. The Offshore Energy conference program will bring together an international faculty of expert speakers to discuss topical industry developments, exchange ideas and network with over 900 conference delegates.
Breaking recordsThe Offshore Energy Exhibition expects to welcome some 500 exhibitors who will showcase their products and services to over 8,500 offshore professionals from over 50 nationalities. This year the event will feature international pavilions from Finland, Germany, Denmark and China. Offshore Energy Exhibition & Conference is the fastest growing gathering of offshore industry professionals. Founded in 2008, Offshore Energy has been breaking records year after year. The 2012 edition attracted 7,632 visitors representing 45 nationalities. Taking place in easily accessible and attractive Amsterdam, Offshore Energy increasingly fulfils a gateway function to the European offshore energy industry.
TripleP@Sea: Smart use of marine ecosystem services providing sustainable Profit of the Planet for People.
TripleP@Sea aims at developing an ecosystem services and marine communities approach in three marine environments that strongly differ in climatological conditions and social context. With this research innovation program Wageningen UR invests in stimulating scientific output, strengthening cooperation within and outside Wageningen UR, enhance innovation to provide an answer/solutions to societal issues and elaborate the possibilities for educating professionals and scientists in the broad field of marine environmental sciences. The three show cases that have been selected are 1) Multifunctional use of platforms at the North Sea (MUPs); 2) Sustainable Arctic developments (Arctic) and 3) Use of biodiversity of the Dutch Caribbean (CN-Statia).
More information: www.wageningenur.nl/en/About-Wageningen-UR/Strategic-plan/TriplePSea-Coastal-and-Marine-resources.htm
Book yourbooth now!Call +31 (0)10 2092600
Created and produced by
offshore oil and gas E&P • transport and storage • maritime servicesoffshore wind • offshore supply • offshore contracting • offshore vessels
Your platform for the future
Boost your business at Offshore Energy 2013
500 exhibitors, 8,500 visitors, 900 delegatesfrom over 50 nationalities
www.offshore-energy.bizSupported by In association with
Media partners
OE13_Adv_OffshoreHolland_216x303mm_fc_15april2013.indd 1 15-04-13 13:24
42 2013
’It is a special project, one of a kind,” states Peter Nieuwenhuijze, Construction & Engineering Manager at ONE. “The presence of gas in the Q16 Maas field was likely. We successfully demonstrated this with drillings from the Maasvlakte industrial area in Rotterdam into the North Sea in the 3rd quarter of 2011.”
FirstThe Q16 Maas field contains natural high caloric gas with a relatively high gas condensate content. To achieve natural gas export specification for consumers, the propane and butane fractions in the gas have to be separated. This will result in four main export product; natural gas, gas condensate, propane and butane in mixture (LPG). LPG production directly from the natural gas source makes the project special and process relatively complex. It is the first LPG production develop-ment of its kind in the Netherlands.
MarginalBesides the process complexity, there is the continuous balance between costs and schedule. Q16-Maas is considered a marginal field. Investments however are relatively high and the time frame of the project development is very tight. It is ONE’s ambition to export first gas, conden-sate and LPG’s in 4th quarter 2013, only 2 years after discovery.
At ONE, engineering is outsourced on a contract basis subject to tender. Edwin van Drunen, Manager Projects at KCI states: “ONE decided to team up with us as they found our proposal commercially the best one. Moreover they already had positive experience with us in the past and like us for being creative in our solutions and for taking an open-minded approach.”
Integrated teamThe Q16 Maas development is a major
project for both ONE and KCI. It the first time that such an undertaking has been embarked on in the Netherlands.
An integrated team of ONE and KCI engineers has been formed and works from KCI’s office in Schiedam. Last year, KCI especially opened a new floor at its headquarter to harbour all KCI and ONE engineers working on this project.
The construction of an onshore plant is quite complex in terms of safety, the environment and the necessary permits. On top of this, the development time for Q16 Maas is tight, so every decision has to be spot on. These decision are taken jointly by the integrated project team.
Both KCI and ONE are positive that this the Q16 Maas project will be finished successfully.
Major project for both ONE and KCI
Ingenious gas plant at the Maasvlakte Rotterdam, the Netherlands
In April 2013, Oranje-Nassau Energie (ONE) will start the construction of an ingenious gas plant at the Maasvlakte Rotterdam. Four types of gas will be processed here, coming from the Q16 Maas field in the Southern North Sea. ONE asked KCI to design and engineer this complete new development. Although ONE has a relative long history in the E&P industry, as operators they have just begun.
Total pipeline solutions
A.HAKPARK
construction drilling coating inspection cleaning
WWW.A-HAKPARK.NL/ENGLISH
A.Hakpark B.V.Steenoven 2-6 4196 HG Tricht P.O.Box 1514190 CD Geldermalsen The NetherlandsT +31 (0)345 579 211 F +31 (0)345 576 443@ info@ a-hak.nl
0194 HAK_adv Offshore Holland.indd 1 17-04-13 10:50
+31(0) 596 620 997 [email protected]
MOTION MONITORING SERVICES & PRODUCTS
Renewable Energy | Transpor t Data LoggingOi l & Gas | Towage | Fast Craf t
WDL | Salvage | Project Cargo | Heavy L i f t
Fit for purpose monitoring solutions
DCN has now purchased two new observation ROVs that can be deployed in a variety of configurations in a wide range of tasks including construction, inspection, installation, repair, recovery and support, The ROVs in question are the Seaeye Falcon DR Observation Class ROV, capable of operating in water depths of up to 1000 metres, and the compact Seaeye Cougar-XT Observation Class ROV for less demanding tasks at a maximum depth of 2000 metres. Both extremely reliable ROVs are equipped with cameras and a full array of measuring equipment and tools to support undersea construction and IRM activities for the oil and gas industry, and the wind energy market. Since the ROV division was launched, two contracts have already been signed.
Offshore Director Rob Vriens of DCN Diving, explained: “For saturation tasks offshore, use of an ROV has been an absolute requirement for some time. It appears extremely likely that ever stricter requirements will lead to further intensification of the deployment of ROVs. In a number of projects,
diving is in fact a complete taboo. Hence the decision to establish our own fleet of advanced ROVs. This decision will make DCN a complete underwater contractor, which thanks to our own habitats means we are able to successfully execute even the most eye-catching underwater projects,
as operational diving company, anywhere in the world. Our focus is clearly on projects in which we can deliver added value in the form of innovative engineering. Over the past few years, in a series of different projects, we have demonstrated that that is the area in which our real strength lies.”
To fully complete its range of services, the management of Bergen op Zoom-based DCN Diving has decided to officially launch its own ROV division, on 1 March 2013. As from that date, Fred Bosman (40) will take up the position of ROV Operations Manager. Bosman acquired his experience with robotic underwater systems with the Royal Dutch Navy, and for the past 13 years has been employed as ROV supervisor in the offshore oil and gas industry.
Dutch DCN to invest millions in establishing ROV division
Purchase of two observation ROVs
44 2013
452013
Company own stand
A.Hak
Adesso Valve
Airborne Oil & Gas
Barge Master
Fischcon
Frames
IRO- Dutch Suppliers Association
Soluforce
Van Aalst Marine & Offshore
Participants IRO Lounge
Holland Marine Equipment Singapore
Navingo
Techno Fysica
Van Heck
Floor plan
OGA 2013
Kuala LumpurAdesso
IRO standFischcon
+
Lounge
A. Hak
Van Aalst
Airborne
Soluforce
FramesBarge Master
Dutch participants at Oil & Gas Asia 2013
46 2013
Offshore Technology Conference 2013
Hertel
Heerema
Barge Master
Boskalis Jumbo
IHC Damen
Keppel
Airborne Bakker
Breman Ampelmann
HSM
Van Oord
UOS Siri
Seatools Seaway
Heinen HopmanTrap
MARIN
Allard
Interdam
Cargomaxx
Allseas
2517
Trap
2625
Tideway
Vryhof
2233
IRO Van Dam
Van Beest
Mammoet
Biglift
Huisman Bayards SAS
A. Hak
Amarcon
26172317
2531
GustoMSC
OSD
24272327
EMCÉ
Dutch Pavilionduring OTC 2013
Dutch pavillion
Visit usVisit usVisit usVisit usVan Beest B.V.Tel : +31 184 41 33 00Fax : +31 184 41 49 59
E-mail : [email protected] of Van Beest International
Visit us at OTC in Houston, booth #1378 and at the Holland Pavilion, booth #2531
ROV SHACKLES
Van Beest B.V., manufacturer of Green Pin® shackles, Excel® hooks and wire rope and chain accessories, introduces a new item to the Green Pin® range: The Green Pin® ROV Release Polar shackle.
What makes this shackle unique: 1. Shackle body painted white for excellent visibility under water 2. Groove for wire rope in pin head to attach pin to shackle body 3. No thread in pin, screwing is not required; pin can rotate freely4. This ROV shackle is the only release shackle available in the market that guarantees an MBL for both inline and side loading. For side loads the same reduction factors apply as for Green Pin® standard shackles5. Supplied without wires; design your own wiring plan
Van Beest B.V. has branches in The Netherlands, Germany, France and USA and stock holding distributors in over 80 countries worldwide.
www.vanbeest.com
1
3
2
5
Also manufacturer of: Also manufacturer of:
4
CONTACT US AT: ROYAL WAGENBORG \ P.O. BOX 14 \ 9930 AA DELFZIJL \ NETHERLANDS \ WWW.WAGENBORG.COM
SIGN OF SOLUTIONSASSEMBLY AND RELOCATION OF ENTIRE DRILLING RIGS. FULL LOGISTIC SERVICES OF PIPELINE PROJECTS. ON- AND OFFSHORE DERRICK MAINTENANCE, MODIFICATIONS & INSPECTIONS. CONDUCTOR DRIVING AND INSTALLATION. ROYAL WAGENBORG IS YOUR SKILLED AND EXPERIENCED PARTNER WITH MODERN EQUIPMENT AND COMMITTED PEOPLE. 24 HOURS A DAY, 7 DAYS PER WEEK.
P30
48 2012
P43
P30
Bakker Sliedrecht Electro Industrie B.V.P.O. Box 253360 AA Sliedrecht The Netherlands
phone +31 (0)184 436 666fax +31 (0)184 436 677mail [email protected] www.bakkersliedrecht.com
Electrical system integrator Bakker Sliedrecht has become an international and leading field player in the world of electrical engineering for marine applications. We are continuously looking for optimum and innovative solutions, with the aid of state-of-the-art and conventional electrical and mechanical tech-niques by advising, designing and building of:- drive and control systems- automation systems- switchboards and MCC’s- control desks - e-motors and generators- cabling / installation- project management
We are specialized in:- diesel-electric propulsion/thruster systems,
including DP systems
- submersible motors and techniques- harmonics and FMEA analyses
Bakker Sliedrecht is carrying out world- wide projects turn-key and/or package based, in offshore, dredging, research vessels, fishing, merchant shipping, navy, inland shipping. Bakker Repair is taking care of maintenance, repair and winding of motors, generators, transformers, in high as well as low voltage.
Quality, safety and environment conditions constantly have our attention. Our quality systems of management and services fully comply with ISO 901 en VCA standards.
No ocean too deep, no country too far!
OTC Stand 2531
A.Hakpark – A world of connections
A.Hakpark offers total solutions for the
transport and distribution of oil, gas, water
and electricity, for data exchange and telecom-
munications and for sustainable energy.
Both in the Netherlands and abroad the
independent companies within the group
are active in the engineering, construction,
commissioning, management, inspection,
maintenance and abandonment of pipelines
and cable networks, above and below ground,
onshore and offshore. Pipeline construction is
one of the main activities, but A.Hakpark also
owns its own drilling company, specialized in
the design, engineering and construction of all
kinds of drillings, and a company that’s active
in industrial services, pipeline services, inspection
services and tank services. Group activities
also include dewatering and coating of pipes,
the complete construction and installation of
thermal energy storage systems, as well as
the manufacturing of appliances, masts and
gantries. This broad range of services enables
A.Hakpark to deliver turnkey projects from
source to end-user. The A.Hakpark companies
serve a wide variety of customers that includes
oil, gas and water companies, regional and
national network operators, energy companies,
data communication and telecommunications
companies, rail operators, local, regional and
national authorities, the chemical and petro-
chemical industry and waste processors.
A.Hakpark P.O. Box 1514190 CD GeldermalsenThe Netherlands
phone +32 (0)345 579 211mail [email protected] www.a-hakpark.nl/english
OTC Stand 2327
Allard-Europe – Not just another foundry
Even in the 21st century casting still is more
a craft than a science. Confidence is a key
factor in the customer-foundry relation,
especially when it comes to complex, heavy
castings with increasingly severe mechanical
and machining requirements.
Allard-Europe combines 90 years of experience
with state of the art technology, but is foremost
driven by the enthusiasm of its employees.
They take pride in being challenged.
Be it a heavy sectioned duplex stainless steel
casting or a complex geometry that needs to
be machined to close tolerances, our skills are
constantly put to the test.
A recent multi-million investment program
raised the standard even further. Allowing for
a casting capacity in excess of 36 tons, casting
dimensions up to 4.5 by 4.5 m and the
possibility to machine up to a diameter of
10 m or a length of 12 m. More important
however were the investments in analytical
capabilities, metallurgical R&D, non-contact
3D scanning technology, 5-axis CAM,
a production monitoring database.
This all to maintain Allard-Europe’s position
as the Iron and Steel Foundry.
Allard-Europe Veedijk 512300 TurnhoutBelgium
phone +32 (0)14 42 11 11fax +32 (0)14 42 52 00mail [email protected] xwww.allard-europe.com
OTC Stand 2427
P25
492012
Lift. Ship. Install. All in one go!
Jumbo is the maritime heavy lift company that
has been developing pioneering solutions for
ocean transportation for many years. Since
2003 Jumbo has been building up a solid and
reliable reputation as a combined transport and
installation contractor in the offshore industry.
Our innovative concept, ‘Lift. Ship. Install. All in
one go.’ provides an extremely efficient solution
for heavy transport and offshore installation
projects.
Jumbo specialises in the following services:
•Installation of subsea structures and moorings
(driven or suction piles) to depths up to 3,000m;
•Providing an offshore supply service to main
installation vessels, often with a wet handshake;
•InstallationofWindTurbineFoundations&
Transition Pieces.
Jumbo’s main installation vessels are the
Jumbo Javelin and the Fairplayer. Equipped
with two 900t Huisman mast cranes, fitted
with a dynamic positioning system (DP2) and
having an enormous deck and large storage
capacity, they are versatile installation vessels.
The Fairplayer is also fitted with a Deepwater
Deployment System to facilitate the lowering
of heavy subsea structures to depths up to
3,000m. Versatility is further enhanced with
the addition of dedicated project equipment
such as heave compensation devices, taut
wires and pile driving hammers.
Jumbo Van Vollenhovenstraat 33016 BE Rotterdam The Netherlands
phone +31 (0)10 79 00 300mail [email protected] site www.jumbo-offshore.nl
OTC Stand 2625
C3
Breman Machinery makes components
for builders of machinery, engineering bureaus
and industrial end users, such as; offshore
companies, the military, aerospace companies
and other industrial firms.
From simple structures to complex mechanical
components.
Work-pieces of high precision, often with
extreme dimensions and weights.
Work-pieces that weigh tens or even hundreds
of tonnes and are made to a precision of a
hundredth of a millimeter. Samples of
workmanship.
What’s unique about Breman Machinery is that
they are able to produce these components and
structures entirely in house.
They have the people, machines and facilities
under their own roof.
•allmachiningandnon-machiningprocessing
of (heavy) materials
•weldingandstructures
•assemblyandfitting
•corrosionprotection
Breman Machinery uses their unique machine
capacity for their own projects and to supply
specific components to third parties. What they
aim for is custom-designed solutions.
ISO9001, ISO3834 and VCA-certified.
Extreme precision!
Breman Machinery b.v.Sasdijk 208281 BM GenemuidenThe Netherlands
phone +31 (0)38 385 5373fax +31 (0)38 385 6528mail [email protected] www.breman-machinery.nl
OTC Stand 2531
Expert designer of mobile offshore solutions
GustoMSC serves clients in three offshore
energy key markets: exploration, construction
and production. Proprietary designs of jack-ups,
semi-submersibles and vessels lie at the heart
of our activities. These designs always meet
specific client requirements, based on solid and
proven foundations and a sea of experience.
Founded in 1862, GustoMSC today offers
design and engineering services to the
offshore oil and gas, renewable energy and civil
construction sectors. Over its recent history,
the company has designed and managed the
construction of over 250 mobile offshore units.
It has provided clients all over the world with
a variety of associated equipment.
The total value of these products and services
exceeds $ 25 billion. Its long history and vast
experience has enabled GustoMSC to become
a market leader.
At present over 50 units to our designs are under
construction worldwide: 14 jack-ups of our
CJ series, 22 units of our P10,000 and Qdrill
drillships, 8 Wind Turbine Installation and
construction jack-ups and 9 units of our DSS
drilling and our accommodation semi-submersibles.
Together with its designs, GustoMSC delivers
associated equipment like jacking systems, skid-
ding systems and offshore cranes to the market.
GustoMSC B.V. Karel Doormanweg 253115 JD SchiedamThe Netherlands
phone +31 (0)10 2883 000fax +31 (0)10 2883 001mail [email protected] www.gustomsc.com
OTC Stand 2531
50 2013
C2
The Nord-Lock Group is a world leader in bolt securing systems
Nord-Lock has decades of documented success in every major industry including oil & gas, energy, transportation and mining.
Our mission is to safeguard human lives and customer investments by securing the world’s most demanding applications.
Recently we launched a new product: Nord-Lock X-series - A new evolution in bolt security
There are two main reasons why bolted joints fail: spontaneous bolt loosening and slackening. Traditionally, application design has involved trying to figure out which will have the biggest
effect on the joint and choosing a solution to handle that one problem. It is a difficult compro-mise to make, especially when both could cause application failure.
Now, you can count on one solution to meet all your bolt securing needs. Introducing the new Nord-Lock X-series washers - for bolt security without compromise.
Read more about our products on our website: www.nord-lock.com
The Nord-Lock Group looks forward to being your partner in bolt optimization.
Nord-Lock Benelux B.V.Kattegat 229723 JP GroningenThe Netherlands
phone +31 (0)50 5275 656fax +31 (0)50 5256 744mail [email protected] www.nord-lock.nl
Kuehne + Nagel provides tailor-made logistics solutions to meet the requirements of the Oil & Gas industry. Our dedicated Oil & Gas staff (more than 600) within the worldwide network ensure that your shipments are in safe hands wherever in the world. Kuehne + Nagel’s Oil & Gas capabilities encompass all transportation services to move your freight throughout the entire supply chain.
• Seafreight–containers&generalcargo• Airfreight–regularconsolidations,secured
allocations on major carriers• Road&Rail–focusonnetworkservices,less-
than-truckload (LTL) & full-truckload (FTL)• Projects–heavyandoversizedcargo,
special charter operations• Warehousing–hubmanagement,dedicated
facilities
We deliver a full range of services tailored to your individual business requirements, across all geographical regions and trade lanes.
Specifically designed to support unique industry requirements, Kuehne + Nagel Oil & Gas provides:• Key-accountmanagementwithadedicated
customer service department • Oil&Gassupplychainmanagement• Rig&maritimesupport• Supply-base logistics and base-to-base support • Specialisedrig-movetaskforce• FCPAcomplianceprograms
Putting the Energy into your Supply Chain!
Kuehne + Nagel N.V.Lloydstraat 353024 EA RotterdamThe Netherlands
phone +31 (0)25 246 75 90fax +31 (0)10 478 99 95mail [email protected] www.kn-portal.com
P25
KCI is a multidisciplinary engineering firm providing full design, engineering and consultancy services to both Oil & Gas and Offshore Renewables Industry.Creative thinking is our strength. We develop innovative concepts for our clients and turn today’s ideas into tomorrow’s winning designs. This unique ability originates from in depth expertise within the complete life cycle. And from having the best engineers on board. We design and engineer:• Completeplatformsandinfrastructureforthe
Oil & Gas and Renewables Industry• Decklayouts,cable&pipelayingsolutions
for Marine EnvironmentOur disciplines encompass: process, piping, subsea, electrical, instrumentation & control, structural, mechanical structures, mechanical & rotating equipment and hydrodynamics.
Our services include: procurement & expediting, execution management and HSE. We guide our customers through a complete project. From acquisition and field development through to fabrication & installation management and think how to decommission the structure in the future. We take care of Concept, Basic and Detailed engineering and continuously feed our whole organization with feedback from every stage of the project. In this way we keep improving our high level engineering knowledge and smart tools. Our goal is to implement cost effective solutions for our clients and to optimize operational capability. Strategic alliances are in place to offer in depth expertise in subsurface engineering.
KCI, the missing link between idea and realization of innovative concepts.
KCI B.V.De Brauwweg 24-303125 AE SchiedamThe Netherlands
phone +31 (0)10 427 03 99fax +31 (0)10 426 63 94mail [email protected] www.kci.nl
P47
P44
512013
Van Beest is a leading manufacturer and sup-
plier for a complete program of high quality
fittings for lifting chain and steel wire rope.
Registered trade marks: Green Pin® for shack-
les and EXCEL® for chain accessories.
For over 90 years the production of high ten-
sile shackles has been our core business. Van
Beest manufactures these high quality Green
Pin® shackles in its own production facility
in the Netherlands.
A genuine “Made in Holland” product
Since 2007 the EXCEL® chain accessories
factory in France is part of the Van Beest
International group. In this factory we produce
an extensive program of chain accessories,
like for example: grade 8 and 10 hooks, lifting
points, swivels etc. Both product lines are
used in many different lifting applications in
various sectors like oil & gas, industry, mining,
shipping and fishing. In oil and gas produc-
tion, safety is all-important. For this reason
Green Pin® Standard and Polar shackles have
DNV 2.7-1 Type Approval. Our products
comply with a wide range of internationally
recognized standards and can be supplied with
various certificates upon request. Van Beest
currently has branches in The Netherlands,
Germany, France and USA. There are stock
holding distributors of Van Beest products
in over 80 countries worldwide.
Van Beest B.V. P.O. Box 573360 AB SliedrechtThe Netherlands
phone +31 (0)184 41 30 00fax +31 (0)184 41 49 59mail [email protected] site www.vanbeest.com
OTC Stand 2531
Siri Marine provides practical monitoring
solutions for a variety of maritime and offshore
markets. We are the developer of hardware and
software motion monitoring components, which
form a unique combination for improved safety
and efficiency in the maritime and offshore
industry. In addition, we provide measuring,
collection and post-processing of environmental
data such as wave heights, wind speed etc.
The applications for our products and services
are numerous: heavy transports, heavy lift,
heave monitoring, tow monitoring, weather
dependant lashing and condition monitoring
of large offshore structures.
In the offshore wind industry our expertise can
be used in several parts of the projects involved:
motion monitoring of the project equipment
during transport to site, environmental
measurements and workability calculations
during installation works and long term condition
monitoring of the operational equipment and
installations. Our standard products are suitable
for a variety of services. However, client specific
applications can be developed, obviously
always with the philosophy of being “Fit for
Purpose”. Siri Marine is an independent and
international operating company, established
in 2003 by its owner and based in Appingedam,
the Netherlands. Currently the company
employs nine people. Our annual turnover has
increased extensively over the years which
makes us a reliable supplier and partner.
Siri Marine Stationsweg 19901 CP AppingedamThe Netherlands
phone +31 (0)596 65 07 25mail [email protected] www.sirimarine.nl
OTC Stand 2517
C4
Van Oord is a leading international contractor specialising in dredging, marine engineering and offshore projects (oil, gas and wind).
We are an innovative partner for our clients and, for over one hundred years, have been helping to create the infrastructure for the world of tomorrow. The growing world population needs more space and the demand for energy is rising constantly. Increasing world trade requires more and better port facilities and climate change is threatening coastal areas. Van Oord provides innovative solutions for worldwide maritime challenges, both now and in the future.
Van Oord is a Dutch-based, independent family business, which is characterised by visible leadership, long-term vision and a sound financial position. Substantial investments in people and equipment are made with great care to ensure the continuity of our business. Our staff are committed, entrepreneurial professionals who are passionate about water and technology. They know the importance of cooperation in achieving the best possible result. By being open and honest, they build on mutual trust and respect.
OTC Stand 2625
Van Oord Offshore bvJan Blankenweg 24207 HN Gorinchem The Netherlands
phone +31 (0)88 8265200fax +31 (0)88 8265210mail [email protected] www.vanoord.com
52 2013
P47
Managers for Offshore Accommodation and Multi-Support Vessels Workfox BV is a leading service provider in the accommodation, construction, lifting and maintenance support segment of the oil & gas industry world-wide and has been the exclusive manager for the operation of the Seafox-fleet of jack-up units since 1991. In addition to providing accommodation, catering and housekeeping services for hook-up and maintenance activities, the Seafox units are able to offer support in a wide variety of offshore installation, inspection and repair operations. The advent of the windfarm installation market has led Seafox Group to design and
build a jack-up specifically for this market,
incorporating the relevant lessons of 20 years of jack-up operational experience. The innovative design of this self-propelled Seafox 5 meets all the requirements for installation and support services in the deeper water depths of the Southern and Central North Sea for clients in the offshore wind and oil & gas industry. Furthermore, on behalf of Owners, Workfox offers temporary accommodation units for offshore locations and onboard ships. These TLQ’s comply with all relevant governmental and class specifications and combine comfort with practical efficiency. They have been designed for offshore oil and gas production sites and are capable of withstanding severe offshore environmental conditions.
Workfox B.V.P.O. Box 7832130 AT HoofddorpThe Netherlands
phone +31 (0)23 554 13 00fax +31 (0)23 554 13 10mail [email protected] www.workfox.com
Wagenborg Nedlift B.V.Gideonweg 59723 BM GroningenThe Netherlands
phone +31 (0)50 368 2800fax +31 (0)50 368 2849mail [email protected] www.wagenborg.com
Wagenborg Nedlift is a specialist in the area of horizontal, vertical, and special transports. Together with expert engineering and project management, Wagenborg Nedlift offers a complete service for hoisting, heavy transport, and assembly. With more than 400 employees it operates throughout Europe and beyond for clients from the oil and gas industry, the petrochemical industry, the energy sector, and construction and infrastructure.
ServicesWagenborg Nedlift offers:•Liftingservices&cranerental•Heavyhaulageservices•Turnkeyheavytransportandliftingprojects•Factorytofoundationprojects
EquipmentWagenborg Nedlift operates following equipment:
•Mobilehydrauliccranesandcrawlercranesupto 750 tons capacity
•Mobiletowercranes•Flatbedtrailers,semilowloaders,eurolow
loaders, 3-bed-4 combinations•Truck-mountedcranesupto70tcapacity•ModulartrailersandSPMTs(SelfPropelled
Modular Transporters)•Gantrysystemsandskiddingandjacking
equipment
QSEOur employees have long made safe working part of their normal routine. Safety and quality are top priorities in our operational policy and defined aspects of our management system. We are certified in line with the ISO 9001, VCA** and VVT accreditation systems. Our FPAL registration number: 28683.
For lease information: [email protected]
HET KLEINE STRAND
New building offices and warehouses.
Directly situated on the North Sea!
IJMUIDEN
IJmuiden, the Netherlands
Extreme precision
Breman Machinery, The Netherlands, T +31 (0)38 - 385 53 73, [email protected], www.breman-machinery.nl
Great challenges need sophisticated solutions. This is the work of specialists. Machines which produce components with exceptional proportions and extreme accuracy. Welcome to Breman Machinery. We are situated in Genemuiden (the Netherlands), beside open water, which means we have a direct connection to the international ports, including Rotterdam, Amsterdam and Antwerp.
For over 150 years, we have offered customized solutions for our relations all around the world. We build components which weigh tens or even hundreds of tonnes, yet are within a tolerance of a few hundredth of a millimeter. The extreme precision you are looking for. Let’s meet in person! Call +31 (0)38 385 53 73 or go to www.breman-machinery.nl.
130709_Breman_Adv_A4_04.indd 1 05-04-13 16:27
Improve your Oil & Gas safety
Cranes are swinging heavy objects across the deck; drills, pumps and shakers are in constant operation. The pace at an oil rig needs to be high and a single minute of downtime would be costly. Nord-Lock’s bolt securing systems are not only safe and reliable, but also cost effective.
Nord-Lock Benelux B.V. • Tel: +31 (0)50-5275656 • Fax: +31 (0)50-5256744 • [email protected] • www.nord-lock.nl
Visit Nord-Lock at OTC 2013 - Houston USA - 6-9 May - Booth #3807
Find out how Nord-Lock can help you on your drilling equipment, top drives, rotating equipment, cranes, blowout preventers, turbines, compressors, fracturing pumps, and more!
Dutch knowledge is called in when the going gets tough
06
Van Oord Offshore offerscomplete marine solutions
Keppel Verolme: poisedfor continued growth
Jumbo Offshore is raising the bar
‘Near Market, Near Customer
Strategy’
Dredging
Dredging and Marine Contractors
Marineingenuity
Offshore Wind Projects
Offshore Oil & Gas
In just two words, marine ingenuity,
we express that we are passionate
dredging and marine contractors
with a worldwide innovative
approach to meet your challenges.
Our people - who manage a
versatile fleet - specialise in
dredging, marine engineering
and offshore projects (oil, gas
and wind).
www.vanoord.com
Get more info with
2013
nr. 0
6o
ffsh
ore
ho
llan
d
Related Documents
