Marine Equipment HANOI : 17. Alley 44 Do Quang Str., Trung Hoa Ward, Cau Giay Dist, Hanoi, Viet Nam Tel : +84-43-555-8933 Fax : +84-43-555-8934 KTS Co., Ltd KOREA TOTAL SOLUTION
Marine Equipment
HANOI : 17. Alley 44 Do Quang Str.,
Trung Hoa Ward, Cau Giay Dist, Hanoi, Viet Nam
Tel : +84-43-555-8933 Fax : +84-43-555-8934
KTS Co., LtdKOREA TOTAL SOLUTION
PRODUCT LIST
JIS-C 3410 Shipboard Cable…………………………………………………
IEC Halogen Free Shipboard Cable……..……………………………….
NEK606_Halogen Free and Mud Resistant Cable ………………………
Enerflex- IEEE45-1998 Marine & Offshore Cable ………………………
BS 6883 Type_Marine & Offshore cable …………..…………………….
UL 1569_ Marine & Offshore Cable……………………….. ……………..
MIL-DTL-24643/24640 Marine & Offshore Cable ………………………..
1. MARINE & OFFSHORE CABLES- JS CABLES (KOREA)
2
2. PUMP- SHIN SHIN MACHENERY CO., LTD (KOREA)
3
COOLING F.W. & S.W. (VID)…………………………
COOLING F.W. & S.W. (VIB)…………………………………………...
FIRE & G/S (SVS)…..………………………………………
LUBRICATING OIL (SDF)………………………………………
F.W & SANITARY (EHS)………………………………………………..
PRODUCT LIST
PRODUCT LIST
3. HEAT EXCHANGER & BOILER- TAE KWANG INDUSTRIES (KOREA)
4
Plate Type Heat Exchanger ………………………………………..
Shell & Tube Heat Exchanger ……………………………………
Finned Tube Type Heat Exchanger……………………………….
Steam Boiler………………………….……………………………….
Hot Water Calorifier…………………………………………………….
PRODUCT LIST
4. TANK MONITORING SYSTEM- PANASIA ( KOREA)
5
Cargo Monitoring System…………………………………………………….
Magnetic Float Type High & Overfill Alarm System…………….…….
Air Purge Type Tank Level & Draft Gauging System….………………….
Electric Pneumatic Type Tank Level & Draft Gauging System………..
Electric Pressure Type Level Transmitter……………………….……….
PRODUCT LIST
6
8. LIGHTING – Daeyang. Electric Co., ( KOREA)
5. WATER INGRESS ALARM SYSTEM- PANASIA (KOREA)
6. PRESSURE MONITORING SYSTEM- PANASIA (KOREA)
7. TEMP. MONITORING SYSTEM- PANASIA (KOREA)
9. WINDOW & DOOR- KOREA
10. TELECOMMUNICATION SYSTEM- HANSHIN (KOREA)
11. VALVE- FOR INDUSTRIAL AND SHIP
1. MARINE & OFFSHORE CABLES- JS CABLES (KOREA)
1.1. JIS-C 3410 Shipboard Cable
7
High voltage power cable(3.6/6, 6/10, 8.7/15kV)
Low voltage power & lighting cable(0.6/1kV)
Control & Telecommunication cable(250V)
Use in commercial marine applications
JIS C 3410(1999)
Norwegian Type (RCOP)
DIN 89158, 89159, 89160
Type approved by DNV, LR, BV, GL, ABS, NK, KR , RINA
8
1. MARINE & OFFSHORE CABLES- JS CABLES (KOREA) 1.2. IEC Halogen Free Shipboard Cable
IEC 60092-351, 359
IEC 60332-3 Category A & IEC 60332-1
IEC 60331(Fire resistant type only)
IEC 60754-1, 2 & IEC 61034
High voltage power cable(3.6/6kV, 6/10kV, 8.7/15kV)
Power & Lighting cable(0.6/1kV)
Instrument & Communication cable(150/250V)
Type approved by LR, BV, ABS, RINA
Suitable for use passenger ship
Excellent flame retardant /fire resistant
Halogen free, low smoke & light weight
1. MARINE & OFFSHORE CABLES- JS CABLES (KOREA)
1.3. NEK606_Halogen Free and Mud Resistant Cable
High voltage power cable(3.6/6kV, 6/10kV, 8.7/15kV)
Low voltage power & lighting cable(0.6/1kV)
Instrument & communication cable(150/250V)
Earthing, bonding & panel cable(0.6/1kV)
Suitable for use in commercial marine applications,
MODU's and platform
Excellent flame retardant / fire resistant
Resistance to oil, mud, abrasion, petrochemical fluid,
moisture and sunlight
Low smoke & halogen free
NEK 606 (2004)
IEC 60092-350, 353, 354, 376
IEC 60092-351, 359
IEC 60332-3 Category A & IEC 60332-1
IEC 60331(Fire resistant type only)
IEC 60754-1,2 & IEC61034
IEC60754-1,2 & IEC 61304
CSA C22.2 No.38(at-40℃)
CSA C22.2 No 245-95
Type approved by DNV(E8097~E8107)
Type approved by LR(02/10023(E1) -
02/10026(E1))
Type approved by BV(14083/A0 - 14085/A0)
Type approved by ABS (06-BK-187816)
Listed by ETL(No. 3019154)
9
10
1. MARINE & OFFSHORE CABLES- JS CABLES (KOREA) 1.4. Enerflex- IEEE45-1998 Marine & Offshore Cable
High voltage power cable(5kV, 8kV, 15kV)
Low voltage power(Distribution) cable(2kV, 600V)
Control cable(600V)
Single cable(600V)
Suitable for use in commercial marine application,
MODU's & platform
Excellent flexibility, flame retardant/fire resistant
Resistant to oil, abrasion, petrochemical fluid,
moisture & sunlight
Low temperature characteristic
IEEE 1580(2001), IEEE 45(1998)
UL 1309(1995), UL 1072
CEAS-68-516
IEEE 1202
IEC 60332-3 Categoty A
IEC 60331(Fire resistant type only)
Listed by UL(E98744)
Listed by ETL(No. 3019154)
Type approved by ABS(01-SE22816-X)
Type approved by LR(02/10036(E1),
02/10037(E1))
Type approved by DNV(E-6394-E-6404)
United states guard(10/04/2002)
Listed by CSA(No. 405C)
11
1. MARINE & OFFSHORE CABLES- JS CABLES (KOREA)1.5. BS 6883 Type_Marine & Offshore cable
BS 6883
BS 6360
BS 7655
IEC 60332-3 Category A & IEC 60382-1
IEC 60331(Fire resistant type only)
BS 6425-1 Halogen gas content
BS 7622-2 Smoke density
High voltage power cable(3600/6600V, 6350/11000V,
8700/15000V)
Low voltage power & lighting cable(600/1000V)
Instrument & communication cable(150/250V)
Earthing, bonding & panel cable(600/1000V)
Fixed wiring of electrical circuits in ships and on mobile
and fixed offshore units
Excellent flame retardant / fire resistant
Enhanced oil resistance SW4 sheath cable
Low smoke & halogen free
12
1. MARINE & OFFSHORE CABLES- JS CABLES (KOREA)
1.6. UL 1569_ Marine & Offshore Cable
Excellent compression & Impact resistance
Provide excellent grounding safety
Explosion-proof and dust-ignition-proof for use in Hazard
ous(classified) area.
5KV Power cable (Type MV -90. Type MC, MC-HL)
5kV Power cable (Type MV-105, Type MC, MC-HL)
600V Power cable(XHHW-2 insulated, Type MC, Type
MC-HL)
600V Control cable(XHHW-2 insulated, Type MC, Type
MC-HL)
300V Power limited circuit cable(Type PLTC)
300V Instrumentation tray cable(Type PLTC)
UL 1072 / UL 1569
UL 44 / UL 2225
UL 2250 / UL 13
Type MV-90 / Type MC or MC-HL, Type
MV-105 / Type MC or MC-HL UL(E237438)
Type MC/MC-HL with XHHW-2 (E239795)
Type PLTC(E237405)
Type ITC(E239308)
13
1. MARINE & OFFSHORE CABLES- JS CABLES (KOREA) 1.7. MIL-DTL-24643/24640 Marine & Offshore Cable
Power & control cable(1200V, 1000V, 600V)
Instrument & Communication cable(300V,
250V)
Normal type & water tight type
Suitable for use in submarine and warship
Excellent flame retardant / fire resistant
Halogen free, low toxic & low smoke
Light weight and water tight type
MIL-DTL-24643
MIL-DTL-24640
VC 95218 part 60- part 66
IEC 60754-1, 2 & IEC 61034
Type approved by GL(85 358-93HH-85 360-93HH)
2. PUMP- SHIN SHIN MACHINERY CO., LTD (KOREA)
2.1. Cooling F.W. & S.W. (VID)
Features:
- Single or double suction in single stage
- Product lubricated non bearing
- Minimum floor space required
- Easy dismantling - overhaul without disconnecting
- Suction and discharge pipes
- Rigid casing resists pipe strain
- Alternative to alternative priming arrangements
- Minimum number of components
Specification:
- Capacity : 15 m³/Hr ~ 500 m³/Hr
- Head : 10 m ~ 140 m
- Suction Dimension : ø80 mm ~ ø200 mm
- Rotation Direction : CW
- The out of the above range can be supplied according
to customer's order placement
14
2. PUMP- SHIN SHIN MACHINERY CO., LTD (KOREA)
2.1. Cooling F.W. & S.W. (VID)
15
Standard Materials
2. PUMP- SHIN SHIN MACHINERY CO., LTD (KOREA)
Stuffing Box Seal
16
The stuffing box is fitted with gland packing, but a mechanical seal can be fitted if the customer
requires it to eliminate gland adjustment
Fitted with gland packing
Fitted with mechanical seal
2. PUMP- SHIN SHIN MACHINERY CO., LTD (KOREA)
Motor
17
The motor for this type of pump must satisfy the following conditions:
Axial thrust
The thrust due to the weight of the rotating element acts downward. The maximum values are as show in
the following table
Screw at the motor shaft end (Bolt for fixing is supplied by Shin Shin)
In order to support the pump rotating element the shaft end must be provided with threaded hole for
fitting the motor coupling.
Rectangularity and eccentricity for motor flange
The rectangularity of the flange face relative to the axis and the eccentricity of the flange fitting outside
diameter must be less than 0.127mm when read from a dial indicator
2. PUMP- SHIN SHIN MACHINERY CO., LTD (KOREA)
2.2. Cooling F.W. & S.W. (VIB)
Features
- Single or double suction in single and double stage
- Oil lubricated metal bearing
- Minimum floor space required
- Easy dismantling-overhaul without disconnecting
- Suction and discharge pipes
- Rigid casing resists pipe strain
- Alternative builds to suit customer’s requirements
- Suitable to alternative priming arrangements
- Minimum number of components
Specification
- Capacity: 15m3/Hr ~ 500m3/Hr
- Head: 10m ~ 140m
- Suction Dimension: Ø80mm ~ Ø200mm
- Rotation direction: CW
18
2. PUMP- SHIN SHIN MACHINERY CO., LTD (KOREA)2.2. Cooling F.W. &S.W. ( VIB)
19
Applications- Piston cooling fresh water pump
- Jacket cooling fresh water pump
- Sea water service pump
- Ballast pump
-Others
Standards Materials
2. PUMP- SHIN SHIN MACHINERY CO., LTD (KOREA)
2.2. Cooling F.W. &S.W. ( VIB )
20
Stuffing Box Seal-The Stuffing box is fitted with mechanical seal only
Fitted with mechanical Seal
-Flushing water is led to the stuffing box from the discharge side
and returned to the suction side in casing after flushing mechanical
seal.
Friming unit- When self priming is required, Air Ejector Primer or Liquid Ring Primer (LRP) is available.
2. PUMP- SHIN SHIN MACHINERY CO., LTD (KOREA)
2.2. Cooling F.W. &S.W. ( VIB)
21
Motor-The Motor for this type of pump must satisfy the following conditions:
Axial Thrust
-The thrust due to the weight of the rotating element acts downward
- The maximum values are as shown in the following tableUnit: Kg
Screw at the motor shaft end ( Bolt for fixing is supplied by Shin Shin)
-In order to support the pump rotating element the shaft end must be provided with threaded
hole for fitting the motor coupling
Rectangularity and eccentricity for motor flange
-The rectangularity of the flange face relative to the axis and the eccentricity of the flange fitting
outside diameter must be less than 0.127mm when read from a dial indicator
2. PUMP- SHIN SHIN MACHINERY CO., LTD (KOREA)
2.3. Fire & G/S (SVS)
Features
- Submersible product lubricated bearing
- Axial split casing
- Rigid casing resists pipe strain
Specification- Capacity : 30 m³/Hr ~ 540 m³/Hr
- Head : 40 m ~ 160 m
- Suction Dimension : ø100 mm ~ ø250 mm
- Rotation Direction : CW
•The out of the above range can be supplied according to customer's
order placement.
22
2. PUMP- SHIN SHIN MACHINERY CO., LTD (KOREA)
2.3. Fire & G/S (SVS)
23
Applications- Fire and general service pump
- Piston cooling fresh water pump
- Others
Standards Materials
2. PUMP- SHIN SHIN MACHINERY CO., LTD (KOREA)
2.3. Fire & G/S (SVS)
24
Stuffing Box Seal-The stuffing box is fitted with gland packing but a
mechanical seal can be fitted if customer requires it to
eliminate gland adjustment
Fitted with gland packing
- Sealing water is led to the stuffing box passing through
throttle bush some of water is drained to bilge after
sealing gland packing
Fitted with mechanical seal
- Flushing water is led to the stuffing box from the
discharge side after removing foreign matter, and
returned to the suction side through throttle bush after
flushing mechanical seal
2. PUMP- SHIN SHIN MACHINERY CO., LTD (KOREA)
2.3. Fire & G/S (SVS)
25
Sleeve bearing & lubrication
The submerged type sleeve bearing is fitted
at the bottom of the pump and is lubricated
by handling water.
The pressure water of 1st stage is led to
sleeve bearing and returned to suction after
lubricating the sleeve bearing.
Vacuum pump unit
When a self priming system is required
a vacuum pump unit driven by pump motor
through the provided clutch. During the
pump operation, vacuum pump is stopped
automatically by releasing the clutch in
accordance with the handling water pressure
2. PUMP- SHIN SHIN MACHINERY CO., LTD (KOREA)
2.4. Lubricating Oil (SDF)
Features- Open or Semi open impeller type having blade of 3 Dimension
- Floor or cover top mounted installation
Specification- Capacity : 14 m³/min ~ 550 m³/min
- Head: 3.2m ~ 14m
- Temperature : 0 0C ~ 40 0C
- Suction Dimension : ø350 mm ~ ø2000 mm
- Rotation Direction : CW
* The out of the above range can be supplied according to customer's order
placement
26
2. PUMP- SHIN SHIN MACHINERY CO., LTD (KOREA)2.4. Lubricating Oil (SDF)
27
Applications- Lubricating Oil Pump
Standards Materials
2. PUMP- SHIN SHIN MACHINERY CO., LTD (KOREA)
2.4. Lubricating Oil (SDF)
28
Vibration Stopper-The long shaft pump experiences abnormal movement due to the shaking
of the LO caused by the ship’s rolling and pitching.
In order to prevent this, the flange for fastening the
casing must be provided with a vibration stopper from the tank.
Selection of pump model
2. PUMP- SHIN SHIN MACHINERY CO., LTD (KOREA)
2.4. Lubricating Oil (SDF)
29
Output of MotorBecause of high LO viscosity at cold startup, capacity decrease and shaft
horse power increase as shown in the chart at right.
Accordingly, motor output is determined by multiplying required
shaft horse power by correction factor so that motor is
not over loaded at cold startup.
Max. shaft horse power
- At cold startup……Required BHP x C
- Motor output………Max. BHP x 1.05~1.05
Standard Spare Parts- 1 pump set of the following spare is supplied for 1 ship.
- Ball bearing
- Coupling bolt, nut & washer, rubber ring.
- Bearing bush
- Oil seal
- Complete set of rotating element ( If required)
2. PUMP- SHIN SHIN MACHINERY CO., LTD (KOREA)
2.5. F.W & Sanitary (EHS)
Features- Back-full-out feature for easy maintenance
- Great variety in metallic materials for corrosion and
wear resistance
- Good efficiency smooth and trouble free operation
throughout a wide range of hydraulic coverage
Specification- Capacity : 0.1 m³/min ~ 210 m³/min
- Head : 55 m ~ 104 m
- Suction Dimension : ø65 mm ~ ø150 mm
- Rotation Direction : CW
* The out of the above range can be supplied according
to customer's order placement
30
2. PUMP- SHIN SHIN MACHINERY CO., LTD (KOREA)
2.5. F.W & Sanitary (EHS)
31
Applications- Fresh water pump
- Fuel valve cooling fresh water pump
- Sanitary pump
- Others
Standards Materials
2. PUMP- SHIN SHIN MACHINERY CO., LTD (KOREA)
2.5. F.W & Sanitary (EHS)
32
Stuffing Box Seal
The Stuffing box is fitted with gland packing, but a mechanical
seal can be fitted if the customer requires it to eliminate gland
adjustment.
Fitted with gland packing
Sealing water is led to the stuffing box is from the discharge
side through the passage in casing, and drained to bilge and the
suction side after sealing gland packing.
Fitter with mechanical seal
Flushing water is led to the stuffing box from the discharge
flange and returned to the suction side after flushing mechanical
Seal.
2. PUMP- SHIN SHIN MACHINERY CO., LTD (KOREA)
2.5. F.W & Sanitary (EHS)
33
Standard Accessories-Base plate
-Discharge pressure gauge
-Suction compound gauge
- Gauge stand
-Gauge root valve
-Hope
-Coupling cover
Standard Spare Parts-1 pump set of the following spare is supplied for
1 ship.
- Gland packing or mechanical seal
- Coupling bolt, nut & washer, rubber ring
- Complete set of rotating element ( if required)
3. HEAT EXCHANGER & BOILER –TAE KWANG INDUSTRIES (KOREA)
3.1. Heat Exchanger
Plate Type Heat Exchanger
34
OverviewIt compensates for the weakness of the existing Shell & Tube Type heat exchanger.
This is a high efficiency, performance and low cost product which is designed and
manufactured for a wide range of application in shipbuilding, power generation,
chemical and food industry.
3. HEAT EXCHANGER & BOILER –TAE KWANG INDUSTRIES (KOREA)
3.1. Heat Exchanger
Features-High Performance/Efficiency
- Low Cost
- Minimized Install Space
- Changeable Heat Capacity
- Low Heat Loss
Specification- Design Range
¤ Pressure : Max.25Bars
¤ Flow : 5000 m3/h
¤ Heat Transfer Area : Total Max.3315.5 m2
- Main Components
¤ Frame, Plate pack & Tie Bolts
- Yearly Production : 400 units
CertificatesKEPIC"MN"
ASME "U","S"
LR, DNV, GL, ABS, BV, RINA
NK, KR, CR ETC
35
3. HEAT EXCHANGER & BOILER –TAE KWANG INDUSTRIES (KOREA)
3.1. Heat Exchanger
Shell & Tube Heat Exchanger
36
Overview- It is a general type of heat exchanger. It can perform all types of heat exchanges such as
Straight & U Bend Types.
Features- All types of heat exchangers required by customers can be designed and manufactured
according to the TEMA or ASME codes.
Specification- Manufacture Capacity. : 150 units/ year
- Production Range : 0.2~50 Tons/unit
3. HEAT EXCHANGER & BOILER –TAE KWANG INDUSTRIES (KOREA)
3.1. Heat Exchanger
Finned Tube Type Heat Exchanger
37
Overview-This is a heat exchanger having finned tubes for air or hydrogen
gas cooling in a large power plant - thermal, nuclear, hydraulic and
water in domestic industrial plants.
Supply Records- Manufacture Capacity. : 50 units/ year
- Production Range : £±~£±0 Tons/unit
- Samsung Heavy Ind.Co.,Ltd
- POSCO LG Chemical Co.,Ltd
- KEPCO Co.,Ltd.
- Doosan Heavy Co.,Ltd
- ULSAN POWER PLANT UNIT 4.5&6
3. HEAT EXCHANGER & BOILER –TAE KWANG INDUSTRIES (KOREA)
3.2. Boiler
Steam Boiler
38
Overview- Vertical water tube steam boilers
- For marine & industrial
- Steam production up to 3ton/hr
- High-efficiency, gas economic
- One-touch button (water supply, operation, burning)
- Stem & water separator
+ Consecutive stem supply in loading fluctuation
- Generates steam less than 5 min
+ Reduce gas losses on preheating
- Minimized installation area
- Automatically waste water disposal system
Series- TDK
3. HEAT EXCHANGER & BOILER –TAE KWANG INDUSTRIES (KOREA)
3.2. Boiler
Steam Boiler
39
Specification
3. HEAT EXCHANGER & BOILER –TAE KWANG INDUSTRIES (KOREA)
3.2. Boiler
Hot Water Calorifier
40
4. TANK MONITORING SYSTEM – PANASIA (KOREA)
4.1. Cargo Monitoring System
Radar Beam Type Cargo Tank Monitoring System
41
Application
Level-Radar is used for continuous non-contact level measurement of liquids in Cargo Tanks
and Slop Tanks of Crude oil carrier, Oil &Chemical Carrier.
The measurement is not affected by changing media, temperature changes, gas blankets or
vapors.
4. TANK MONITORING SYSTEM – PANASIA (KOREA)4.1. Cargo Monitoring System
Radar Beam Type Cargo Tank Monitoring System
42
Measuring Principle
Level-Radar is a "downward-looking" measuring system, operating based on the
time-of-flight method. It measures the distance from the reference point (process
connection) to the product surface. Radar impulses are emitted by an antenna, reflected off
the product surface and received again by the radar system.
Technical Data
Measuring Range Up to 35m depending on installation, Product, surface condition and antenna size
Output 4.20mA, 4...20mA, HART®PROFIBUS PA, FOUNDATION Field bus.
Measuring accuracy 3mm
Measuring cycle 1set
Certification ATEX II 1/2 G EEX ia II C T6. ATEX II 1/2 G EEX d[ia] II C T6
Product temperature -40oC to 150oC
Pressure from vacuum to 40bar
Process connection 1 ½" thread DN50(2") ..DN150(6") flange
Major material SUS316
Beam angle 80
Weight 10kg
4. TANK MONITORING SYSTEM – PANASIA (KOREA)
4.1. Cargo Monitoring System
Magnetic Float Type Cargo Tank Monitoring System
43
Generals
The Tank Monitoring System, named as PATROLTM system is a magnetic float type tank
level gauge featuring an all-in-one detector that measures tank level, temperature, vapor
pressure, as well as issuing alarm when limits are exceeded.
4. TANK MONITORING SYSTEM – PANASIA (KOREA)
4.1. Cargo Monitoring System
Magnetic Float Type Cargo Tank Monitoring System
44
Standards Specifications
Level Detecting Part
Type Read Switch with Magnetic Float
Anti-Explosion Structure
Ex ia II C T6
Measuring Range 50m, max
Specific Gravity 0.5 and above (of liquid in tank)
Viscosity 15,000sec. Redwood No,1 max
Detecting Accuracy ±20mm (option : 10mm)
Allowable Temperature -60... +150 0C (stand.), -162 0C (option)
Allowable Pressure 3kgf/cm2 (option: 80kgf/cm2 , max)
Type Two-terminal IC, temp, Transducer
Measuring Range -55/+ 150 0C
Measuring Accuracy ± 2 0C
Temperature Detecting Part
4. TANK MONITORING SYSTEM – PANASIA (KOREA)
4.2. Magnetic Float Type High & Overfill Alarm System
45
Specifications
Detection units Reed switch with magnetic float
Detecting Accuracy ¡¾5mm
Switch Contact Rating 250VAC, 1A
Specific Gracity 0.6 above
Material Housing-SUS316Flange-SUS304/SUS316Guide pipe-SUS304/SUS316Float-SUS316, Titanium
Anti-Ecplosion Intrinsically safe type
Structure
Allowable Pressure 6kgf / §¨
Connection Size Installation-JIS 5K 100A FF/125A FFJIS 5K 125A FF (with chamber)Conduit-JIS 5K 32A or JIS 5K 40K
Alarm Point High alarm-at 95% of cargo volumeOver fill alarm-at 98% of cargo volume
Type approved by KR, ABS, DNV, LRS, BV, GL, NK, RINA
4. TANK MONITORING SYSTEM – PANASIA (KOREA)
4.3. Air Purge Type Tank Level & Draft Gauging System
46
Specifications
Type of system one(1)-Line air purge system
Accuracy 1% of F.S, if drawn scale indicator class 0.5
Working temperature -25 to +75¡ÆC(It must be secured that the dew point of the air lies below Min. Temperature)
Air flow consumption 5 to 50N/min
Operating air pressurerating
4 to 7kg/ §²
Signal pipe OD 8mm
Valve casing alloyed brass with protect cover(SUS304)
4. TANK MONITORING SYSTEM – PANASIA (KOREA)
4.4. Electric Pneumatic Type Tank Level & Draft Gauging System
47
Applications
Ballast tank level measurement. Draft measurement. Engine room tank level measurement. (F.O,
D.O, L.O, etc)
Features- 10 Tank interface without any additional components. (Air purge System)
¤ Built-in Air supply unit, Constant Flow Regulator Module (PA-1500)
¤ Sensor Module (PAMX-2000), 12 bit A/D converter
- Various kind of correction function.
¤ Specific Gravity, Trim &Heeling, Sensor position
¤ Volume converting according to the Volume table
- Various display format of the tank information to the user
Industrial standard serial link and Ethernet link
¤ 10Mbps LAN 1 channel
¤ RS232/485 1 channel each
- Windows ¢ç based Configuration program for easy setting &calibration
¤ Module/Ship/Tank/Channel setting
4. TANK MONITORING SYSTEM – PANASIA (KOREA)
4.4. Electric Pneumatic Type Tank Level & Draft Gauging System
48
Specification
Type of system one-line air purge system
Air supply 6~10bar, set to 4bar
System Accuracy ¡¾1% of Full scale
CPU Intel¢ç StrongARMTM SA1110-206MHz
OS Linux for embedded system
ROM 16Mbyte Flash ROM
RAM 64Mbyte SDRAM, PC1000
Display 4 ¡¿20 character VFD (Vacuum Fluorescent Display)
Input 10 air pressure from tanks
Output - 2 serials (built - in RS232/485)- 1 LAN 10base - T- Analog output (4~20mA, 1~5V)-Option- Dry Contact - Option
Operating temperature -10~45¡ÆC (under dry air condition)
Operating humidity 0~80RH
Dimension 450 ¡¿350 ¡¿240(mm)
Weight App. 20kg
Electric Power 85~250VAC, 50~60Hz
4. TANK MONITORING SYSTEM – PANASIA (KOREA)
4.3. Electric Pneumatic Type Tank Level & Draft Gauging System
49
Specification
4. TANK MONITORING SYSTEM – PANASIA (KOREA)
4.5. Electric Pressure Type Level Transmitter
50
Specification
Transducer ranges 0-3.5 / 0-7 / 0-16 / 0-35m H2O gauge0-20 / 0-35m H2O absoluteEach transducer range programmable in 8 steps.
Accuracy ¡¾0.25% F.S at 20¡ÆC
Stability Max. ¡¾0.1% / year
TEB(Total Error Band) ¡¾2.0% F.S. at-20 to +80¡ÆC
Overload capability Min. 4x transducer range with no changes in calibration
Built-in TemperaureSenser Pt100
Optional
Output Curent 4-20mA DC. loop powered 2-wire system
Current Limiting Typically : 25mA / Max : 32mA
Materials of housing &diaphragm
Standard transducer : TitaniumHigh temp. transducer : Stainless steel
Operating TemperatureRanges
Standard transducer : -20 to +80¡ÆC High temp. transducer : -20 to +125¡ÆC Amplifier : -40 to +85¡ÆC
Protection Class Intrinsic Safety
Tradsducer : IP 68 / Amplifier : IP 56EEx ia IIC T5 compliantMax. 75m cable between transducer and transmitter amplifier
Power Supply he Power Supply can vary from 1+3314-33. VDC. Permissible load resistance is shown graphically below.Calculating formula :
5. WATER INGRESS ALARM SYSTEM- PANASIA (KOREA)
51
Features- No moving part
- Reliable
- No damage by cargo
- Easy to maintenance
- Insensitive to cargo solids
Specification
Certified to EX ia II C T6 Normal voltage 4.6V to 30V DC
Ambient temperature 25 ¡ÆC ~ +70 ¡ÆC
Normal current Un switched <1mA,switched >3.46mA
Liquid temperature 20 ¡ÆC ~ +70 ¡ÆC
Pressure 0~5 bar Measuring voltage AC5V
Housing material SUS316 Max. no-load current 1§Ë
Process connection Thread G1-1/4A or flange
Max. short -circuit
Protection class IP56, IP65, IP68 Frequency 50kHz
6. PRESSURE MONITORING SYSTEM- PANASIA (KOREA)
52
Technical Specification
Power supply DC 10~30VDC
Accuracy ¡¾0.5% FS
Response Time < 1ms / 10...90% FS
Measuring Range 0~25 bar
Overload Pressure Min. 3xFS
Burst pressure 200bar
Output signal 4-20mA
Process connection G 1/2A (PF 1/2")
Approval KEMA 03ATEX1127
Enclosure IP65 (DIN 43650)
Ambient temperature -25~ +85 ¡ÆC (T4)
Medium Temperature -25~ +100 ¡ÆC (T4)
6. PRESSURE MONITORING SYSTEM- PANASIA (KOREA)
53
Technical Specification
7. TEMP. MONITORING SYSTEM- PANASIA (KOREA)
54
Generals
PATM-5000 series Module is designed for being integrated in a housing and fully compatible
with RTD. thermocouple and thermister etc,. This module can be supplied as complete or
partial system with later additions
PC-based PROGRAMMABLE CONTROLLER
- Cpu : 16-bit microprocessor
- Built-in real-time clock
- Memory : Up to 256KB Flash ROM, 256KB SRAM
- Built Watchdog Timer
- Operating system : Rom-DOS
- 3 communication ports supported(COM1:RS-232;COM2:RS-
485;COM3/Programming Port:3-wire RS-232)
- Built-in Paradtm-31 Runtime Engine (ADAM-5510/P31 only)
8. LIGHTING- Daeyang Electric Co., Ltd (KOREA)
55
Navigation and signal
lights
Fluorescent lights
Decorative lightsReceptacle and switches lights
Incandescent lights
9. WINDOW & DOOR- KWANG-WOON (KOREA)
56
SQUARE WINDOW
1. BOLTING TYPE/ Non- Opening Ship Window
DIMENSION TABLE ( unit: mm)
Nominal size W1 x H1
W x H ( W +48) x ( H+48)
Standard ISO, JIS, BSMA
Material Al. – Alloy or Brass
Glass Toughened, Double glazed, Laminated, etc
Size According to Client request
-Ventilation: Not allowed
-Application: Mainly at the front side of deck house. Most commonly used
-Particularity: Used in case of navigation deck. C.V.S attachment available
-Installation method: Bolted joint
9. WINDOW & DOOR- KWANG-WOON (KOREA)
57
SQUARE WINDOW
2. BOLTING TYPE/ Opening Ship Window
DIMENSION TABLE ( unit: mm)
Nominal size W1 x H1
W x H ( W +48) x ( H+48)
Standard ISO, JIS, BSMA
Material Al. – Alloy or Brass
Glass Toughened, Double glazed, Laminated, etc
Size According to Client request
-Ventilation: Allowed
-Application: Mainly at the side of deck house.
-Particularity: Allowed to open in any directions.
-Installation method: Bolted joint
9. WINDOW & DOOR- KWANG-WOON (KOREA)
58
SQUARE WINDOW
3. WELDING TYPE/ Non- Opening Ship Window
DIMENSION TABLE ( unit: mm)
Nominal size W1 x H1
W x H ( W +48) x ( H+48)
Standard ISO, JIS, BSMA
Material Al. – Alloy or Brass & Steel
Glass Toughened, Double glazed, Laminated, etc
Size According to Client request
-Ventilation: Not allowed
-Application: Mainly at the front side of deck house. Most commonly used
-Particularity: Used in case of navigation deck. C.V.S attachment available
-Installation method: Welding
9. WINDOW & DOOR- KWANG-WOON (KOREA)
59
SQUARE WINDOW
4. WELDING TYPE/ Opening Ship Window
DIMENSION TABLE ( unit: mm)
Nominal size W1 x H1
W x H ( W +48) x ( H+48)
Standard ISO, JIS, BSMA
Material Al. – Alloy or Brass & Steel
Glass Toughened, Double glazed, Laminated, etc
Size According to Client request
-Ventilation: allowed
-Application: Mainly at the side of deck house.
-Particularity: Allowed to open in any directions.
-Installation method: Welding
9. WINDOW & DOOR- KWANG-WOON (KOREA)
60
SQUARE WINDOW
5. WELDING TYPE/ Electric Heated Ship Window
DIMENSION TABLE ( unit: mm)
Nominal size W1 x H1
W x H ( W +48) x ( H+48)
Standard ISO, JIS, BSMA
Material Al. – Alloy or Brass & Steel
Glass Toughened, Double glazed, Laminated, etc
Size According to Client request
-Ventilation: Not allowed
-Application: Mainly at the front side of deck house.
-Particularity: prevent window from freezing under cold temperature conditions.
9. WINDOW & DOOR- KWANG-WOON (KOREA)
61
SQUARE WINDOW
6. A-60 CLASS / Fire resistant Ship Window
DIMENSION TABLE ( unit: mm)
Nominal size W1 x H1
W x H ( W +154) x ( H+154)
Standard ISO, JIS, BSMA
Material Al. – Alloy or Brass & Steel
Glass Toughened, Double glazed, Laminated, etc
Size According to Client request
- Closed by the heat of fire
- Use: LNG, OIL, CHEMICAL VESSEL
- Prevent crews and passengers from flame and the high temperature on the window surface
during 60 minutes when fire break outs.
9. WINDOW & DOOR- KWANG-WOON (KOREA)
62
SQUARE WINDOW
7. VERTICAL TYPE / Sliding Ship Window
DIMENSION TABLE ( unit: mm)
Nominal size W1 x H1
W x H ( W +40) x ( H+40)
Standard Kwangwon
Material Al. – Alloy
Glass Toughened, Double glazed, Laminated, etc
Size According to Client request
-Ventilation: Allowed
-Application: Mainly at the front and side of deck house
-Particularity: Allowed to open vertically.
9. WINDOW & DOOR- KWANG-WOON (KOREA)
63
SQUARE WINDOW
8. HORIZONTAL TYPE / Sliding Ship Window
DIMENSION TABLE ( unit: mm)
Nominal size W1 x H1
W x H ( W +70) x ( H+70)
Standard Kwangwon
Material Al. – Alloy
Glass Toughened, Double glazed, Laminated, etc
Size According to Client request
-Ventilation: Allowed
-Application: Mainly at the front and side of deck house
-Particularity: Allowed to open horizontally.
9. WINDOW & DOOR- KWANG-WOON (KOREA)
64
JOINER DOOR
DIMENSION TABLE ( unit: mm)
Nominal size W1 x H1
W x H ( W +50) x ( H+50)
Standard Kwangwoon
Material Al. – Alloy or Stainless Steel & Steel
Type With window/ Louver
Installation method Bolted/ Welded
Size According to Client request
-Application: Mainly adhesive type. Mostly used in any position
-Particularity: A hinged opening and shutting door.
-With window or with Louver according to uses
9. WINDOW & DOOR- KWANG-WOON (KOREA)
65
SLIDING DOOR
DIMENSION TABLE ( unit: mm)
Nominal size W1 x H1
W x H ( W +100) x ( H+50)
Standard Kwangwoon
Material Al. – Alloy or Stainless Steel & Steel
Type With window
Installation method Bolted/ Welded
Size According to Client request
-Application: Insufficient places to attach doors
-Particularity: a sliding door
9. WINDOW & DOOR- KWANG-WOON (KOREA)
66
WEATHER TIGHT DOOR
DIMENSION TABLE ( unit: mm)
Nominal size W1 x H1
W x H ( W +20) x ( H+20)
Standard Kwang woon
Material Al. – Alloy or Stainless Steel & Steel
Type 6Dog/ 4Dog/ 2Dog/1Dog
Installation method Welded
Size According to Client request
-Application: Mainly engine rooms used
-A dogged outdoor calibration: usually 4 or 6 dogs attached. Lock by turning a dog clockwise
a right angle and unlock by turning a dog counterclockwise a right angle
9. WINDOW & DOOR- KWANG-WOON (KOREA)
67
QUICK ACTING DOOR
DIMENSION TABLE ( unit: mm)
Nominal size W1 x H1
W x H ( W +100) x ( H+100)
Standard Kwang woon
Material Al. – Alloy or Stainless Steel & Steel
Type Navy Type/ Commercial Type
Installation method Welded
Size According to Client request
-Mainly used for naval ships
-Operate 8 clips at a time just turning 1 handle. Able to open and shut within a short time
9. WINDOW & DOOR- KWANG-WOON (KOREA)
68
QUICK ACTING DOOR
DIMENSION TABLE ( unit: mm)
Nominal size W1 x H1
W x H ( W +100) x ( H+100)
Standard Kwangwoon
Material Al. – Alloy or Stainless Steel & Steel
Type Navy Type/ Commercial Type
Installation method Welded
Size According to Client request
-Mainly used for naval ships
-Operate 8 clips at a time just turning 1 handle. Able to open and shut within a short time
10. TELECOMMUNICATION SYSTEM – HANSHIN (KOREA)
69
PUBLIC ADDRESS SYSTEM
HPA-7300
HPA-9700 & HPA-7300 SERIES
Public Address with Talkback System is designed for general announcing
with advanced technology and complies with the IMO regulation III/6.5 &
Res. MSC.47 (66) performance standards.
System Feature:
- Flexible choice of output power
-Reliable and durable performance
- Simple installation and easy maintenance
- Convenient control with microprocessor and diode matrix
- Automatic main/em’cy power changeover
- Automatic main/ sub amplifier changeover in dual system
10. TELECOMMUNICATION SYSTEM – HANSHIN (KOREA)
70
PUBLIC ADDRESS SYSTEM
System Specification
HPA-9700 Series- Single or Dual type system
- Maximum output: 200W~4,000W
- Remote controller ( max.6ea)
- Alarm generator: option
- General emergency alarm
- Fire alarm
- CO2 smoke alarm
- Gas alarm
- Announcing priority: 12 class
- Auto- telephone paging call ( all group 1, group 2)
- Automatic main/em’cy power changeover
- Fault detector (system check)
- Operating temperature & humidity: -50C ~+ 55oC, 95%
- Distortion: less than 0.5%
- S/N Ratio: more than 55dB
- Power source: AC110/220V 50/60Hz & DC24V
- Dimension ( WxDxH): 585 x 450 x 1200, 1300, 1500mm
HPA-7300 series- Single type system
- Maximum output: 200W
- Remote controller: option
- General emergency alarm generator
- Automatic main/em’cy power changeover
- Operating temperature & humidity: -50C ~+ 55oC, 95%
- Power source: AC110/220V 50/60Hz & DC24V
- Dimension ( WxDxH): 585 x 450 x 1200, 1300, 1500mm
HPA–97XX series
HPA– 7300
10. TELECOMMUNICATION SYSTEM – HANSHIN (KOREA)
71
PUBLIC ADDRESS SYSTEM
(HWS-130/131) (HWS-500/150) (HWS-550/155) (HWS-550V/155V) (HWS-801/181)
(HEG-941)(HBS-702/172)
(HFS-700/170) (HDM-720)(HFS-703/173)
Watertight Speaker
Accommodation Speaker Ex Type Speaker
10. TELECOMMUNICATION SYSTEM – HANSHIN (KOREA)
72
DIGITAL MARINE CLOCK SYSTEM
HGC-100 Digital Marine Clock System guarantees high reliability
and accuracy due to using satellite signal data interfaced with
GPS/DGPS navigator.
System feature:
- Flexible composition
- Digital & analog type slave clocks
- Automatic or manual change of local time
- Sufficient capacity
+ Max. 100 sets of digital & analog type slave clock
+ Max.70 sets of analog type slave clock
- Output date: 3 pots ( NMEA-0183, RS422)
Digital Marine Clock (HGC-100)
10. TELECOMMUNICATION SYSTEM – HANSHIN (KOREA)
73
ANEMOMETER & ANEMOSCOPE
HWD-200A Anemometer & Anemoscope
- Power supply: AC100/220v
- Direction signal: AC100V Synchro
- Speed signal: 0~28V at 70m/s AC generator, encoder
- Indicator: digital
- Output signal: RS422 ( $WIMWV, NMEA-0183)
- NMEA Tx rate: 1 of 10 time/sec
- Output port: 3 ports (1port: changeable RS232)
- Dimension (W x H x D): 85 x 70 x 230mm
(HWD-200A)
10. TELECOMMUNICATION SYSTEM – HANSHIN (KOREA)
74
ANEMOMETER & ANEMOSCOPE
HWD-200A Anemometer & Anemoscope
- Power supply: AC100/220v
- Direction signal: AC100V Synchro
- Speed signal: 0~28V at 70m/s AC generator, encoder
- Indicator: digital
- Output signal: RS422 ( $WIMWV, NMEA-0183)
- NMEA Tx rate: 1 of 10 time/sec
- Output port: 3 ports (1port: changeable RS232)
- Dimension (W x H x D): 85 x 70 x 230mm
(HWD-200A)
10. TELECOMMUNICATION SYSTEM – HANSHIN (KOREA)
75
CCTV SYSTEM
System Specification
- Camera input: Max.128
- Control station: Max.8
- PTZ Control support: RS 422/485
- Pan/Tilt
+ Pan angle: 3550, Tilt angle: - 900 ~ + 900
+ Operating temperature: -250C ~ + 600C
+ International protection: IP68
+ Ex Protection: Ex IIC T5, IP66CCTV (Video Date Record)
10. TELECOMMUNICATION SYSTEM – HANSHIN (KOREA)
76
Marine Telephone
GENERAL
Automatic Telephone Exchange System is designed with high reliable technology, and mounted
with IAPX8088 Micro-processor CPU, stored program for system control, space division matrix
for switch control, dial tone multi frequency system, protecting function from lightning and call
quality stabilizing circuit.
The system is also specially made to keep a good performance under the bad environment of
vessel at sea
Acquired CE mark (EMC) from the DNV class
1. AUTO TELEPHONE EXCHANGER
HX - 120 HX - 72 HX - 26
10. TELECOMMUNICATION SYSTEM – HANSHIN (KOREA)
77
Marine Telephone
1. AUTO TELEPHONE EXCHANGER
HX - 120
SYSTEM SPECIFICATION
1. Subscriber Number: max. 118 lines / No.200~No.317
2. External Call & Trunk:
-. Shore line : 3 lines (CO2, CO3, CO4)
Maker standard:
Out going : Subscriber No.200~No.205
In coming : Subscriber No.200, No.203
-. Satcom : 1 line (CO1)
Maker standard
Out going : Subscriber No.200~No.205
In coming : Subscriber No.200
3. Automatic Call-back
4. Paging Call: 3 areas
5. Add-on Conference
6. Call Split
7. Priority Call
8. Wake-up Call
9. Self Ring Test
10. Dimension: 565x810x386
11. Weight: Appr. 75Kg
10. TELECOMMUNICATION SYSTEM – HANSHIN (KOREA)
78
Marine Telephone
1. AUTO TELEPHONE EXCHANGER
HX - 72
SYSTEM SPECIFICATION
1. Subscriber Number: max. 70 lines / No.20~No.89
2. External Call & Trunk:
-. Shore line : 3 lines (CO2, CO3, CO4)
Maker standard:
Out going : Subscriber No.20~No.25
In coming : Subscriber No.20, No.23
-. Satcom : 1 line (CO1)
Maker standard:
Out going : Subscriber No.20~No.25
In coming : Subscriber No.20
3. Automatic Call-back
4. Paging Call: 3 areas
5. Add-on Conference
6. Call Split
7. Priority Call
8. Wake-up Call
9. Self Ring Test
10. Dimension: 630x837x250
11. Weight: Appr. 35Kg
10. TELECOMMUNICATION SYSTEM – HANSHIN (KOREA)
79
Marine Telephone
1. AUTO TELEPHONE EXCHANGER
HX - 26
SYSTEM SPECIFICATION
1. Subscriber Number: 26 lines / No.20~No.45
2. External Call & Trunk:
-. Shore line: 2 lines (CO1, CO2)
Maker standard:
Out going : Subscriber No.20~No.26
In coming : Subscriber No.20, No.23
-. Satcom : option
3. Automatic Call-
Back: Maker standard / All subscribers
4. Paging Call: 1 area
5. Add-on Conference: Maker standard / All subscribers
6. Call Split: Maker standard / All subscribers
7. Priority Call
8. Self Ring Test
9. Dimension: 440x570x156
10. Weight: Appr. 14Kg
10. TELECOMMUNICATION SYSTEM – HANSHIN (KOREA)
80
Marine Telephone
2. AUTO TELEPHONE
Auto Telephone (HS-70A)
Desk TypeAuto Telephone (HS-70AW)
Wall Type
Auto Telephone (HAP-900A)
Portable TypeAuto Telephone (HAF-800D)
Flush Type
10. TELECOMMUNICATION SYSTEM – HANSHIN (KOREA)
81
Marine Telephone
3. COMMON BATTERY TELEPHONE
GENERAL
Common Battery telephone System is useful communication
system when main AC power is not supplied.
The system is operated by DC24V power source in common for
communication and signal transmission of the bell and lamp, and
it is used for important conversation between wheelhouse and
engine control room, or general conversation between some
stations.
It is specially designed in consideration of hard marine
environment at sea, and made of solid material.
Acquired CE mark from the DNV class
SPECIFICATION
-. Operating Power : DC24V
-. Operating Temperature : -10°C ~ +55°C-. Operating Humidity : 95%
-. System Component
* Direct Calling system (1:1 Station)
* Master and Slave Calling System (1:4 Station)
* Mutual Selection Calling System (1:n, Max 12 Satation)
-. Classification of Telephone
* Water Tight * Dimmer * Direct * 12-Selector * Sub-Receiver* Headset
-. Built-in Relay for External Bell
10. TELECOMMUNICATION SYSTEM – HANSHIN (KOREA)
82
Marine Telephone
4. SOUND POWERED TELEPHONE
GENERAL
Sound Powered Telephone system is very useful communication
system under the emergency situation because this system keeps
normal operating condition even though the main AC power and
emergency DC power source are not supplied.
It is specially designed in consideration of hard marine
environment at sea, and made of solid material.
Acquired CE mark from the DNV class
SPECIFICATION
-. Generater Output : AC60V~AC90V
-. Operating Temperature : -10°C ~ +55°C-. Operating Humidity : 95%
-. System Component
* Direct Calling system (1:1 Station)
* Master and Slave Calling System (1:4 Station)
* Mutual Selection Calling System (1:n, Max 12 Satation)
-. Classification of Telephone
* Water Tight* Dimmer* Direct* 12-Selector* Sub-Receiver
* Headset
-. Built-in Relay for External Bell
11. VALVE FOR INDUSTRIAL- NSV (KOREA)
83
CAST STEEL
1. GATE VALVES- BOLTED BONNET
11. VALVE FOR INDUSTRIAL- NSV (KOREA)
84
CAST STEEL
2. GLOBE VALVES- BOLTED BONNET
11. VALVE FOR INDUSTRIAL- NSV (KOREA)
85
CAST STEEL
3. SWING CHECK VALVES- BOLTED COVER
11. VALVE FOR INDUSTRIAL- NSV (KOREA)
86
CAST STEEL
4. GATE VALVES- PRESSURE SEAL BONNET
11. VALVE FOR INDUSTRIAL- NSV (KOREA)
87
CAST STEEL
5. GLOBE VALVES- PRESSURE SEAL BONNET
11. VALVE FOR INDUSTRIAL- NSV (KOREA)
88
CAST STEEL
6. SWING CHECK VALVES- PRESSURE SEAL BONNET
11. VALVE FOR INDUSTRIAL- NSV (KOREA)
89
CAST STAINLESS STEEL VALVES
1. GATE VALVES- BOLTED BONNET
11. VALVE FOR INDUSTRIAL- NSV (KOREA)
90
CAST STAINLESS STEEL VALVES
2. GLOBE VALVES- BOLTED BONNET
11. VALVE FOR INDUSTRIAL- NSV (KOREA)
91
CAST STAINLESS STEEL VALVES
3. SWING CHECK VALVES- BOLTED COVER
11. VALVE FOR INDUSTRIAL- NSV (KOREA)
92
CAST STAINLESS STEEL VALVES
4. CRYOGENIC GATE VALVES- BOLTED BONNET
11. VALVE FOR INDUSTRIAL- NSV (KOREA)
93
CAST CARBON & STAINLESS STEEL
DUO-CHECK VALVES
Features & Advantages
1. Compact Wafer Design..
2. Prevention of Water Hammer
3. Complete Freedom of Installation.
4. Long Service Life
5. Smooth Operation
6. Tight Sealing
11. VALVE FOR SHIP- DONG-A & Wonkwang (KOREA)
94
MAIN STARTING VALVE
Engine Type: Main B&W 2-Stroke All Engine
Pressure: 30kgf/cm3
Size: 80A, 100A, 150A, 200A
Fluid: Air
CHECK V/V FOR MAIN STARTING VALVE
Engine- Type: Man B&W 2-Stroke, L-S26MC/C- 96MC/C
Fluid: Steam, Air, Gas, Oil, Water
F.O INLET BALL VALVE (COMPACT TYPE)
Engine- Type: Sulzer, Man B&W 2-Stroke
Pressure: 5~30kgf/cm3
Fluid: Steam, Air, Gas, Oil, Water
11. VALVE FOR SHIP- DONG-A & Wonkwang (KOREA)
95
CRANKER CASE RELIEF VALVE
Application Fluid: Gas & Oil
Open pressure: 0.05kg/cm3 ±
20%
STARTING AIR VALVE
Engine- Type: Man B& W 2-Stroke All Engine
STARTING AIR PILOT VALVEEngine- Type: Man B&W 4-Stroke, L32/40Fluid: Steam, Air, Gas, Oil, Water
PRESSURE REDUCING VALVE
Engine- Type: Man & Sulzer Engine 4-Stroke All EngineFluid: Steam, Air, Gas, Oil, Water
SAFETY VALVEEngine- Type: Air Reservoir all 25A ~ 43AFluid: Steam, Air, Gas, Oil, Water
11. VALVE FOR SHIP- DONG-A & Wonkwang (KOREA)
96
VALVES
Cooling Water Shut-off
Valve
Cooling Water Shut-off
Valve
Pressure Reduction Valve
3/2 Way Solenoid Valve Pressure Reducing Valve
3/2 Way ValvePressure Control
Valve
Shock Absorber Buffer PistonCondenser Floating Valve
11. VALVE FOR SHIP- DONG-A & Wonkwang (KOREA)
97
VALVE
11. VALVE FOR SHIP- DONG-A & Wonkwang (KOREA)
98
VALVE
11. VALVE FOR SHIP- DONG-A & Wonkwang (KOREA)
99
AIR RESERVOIRS
Thank you!
“ Let’s go together to the future ”