Page 1
M A C H I N E R Y
MARCH 2016Volume 31 Number 3Phone: 905-528-7765Fax: 905-917-0222
www.cluemachines.comemail: [email protected]
WF 13R � oor type with Ram AND Spindle
The rising force in boring mills
WF 13R � oor type with Ram AND Spindle
WFT 13R table type with Ram AND SpindleWFT 13R table type with Ram AND Spindle
Phone: 905-876-0890 | www.tosamerica.com | 7055 Auburn Road, Milton, ON L9T 7V9
TOS America V7.indd 1 1/27/2014 2:09 PM
Page 2
Page 2 Clue March, 2016
Page 3
Horizontal Lathes “NEW” 20˝x 60˝ manual lathe, 10˝ 3
jaw chuck, 14˝ 4 jaw chuck, 4˝ spindle bore, splash guard, steady rest, stock 4039
“NEW” 20˝x 80˝ manual lathe, 10˝ 3 jaw chuck, 14˝ 4 jaw chuck, 4˝ spindle bore, splash guard, steady rest, stock 4037
MAZAK Slant Turn 40N-ATC Millcenter 1000, Fanuc Control
RD&D 64˝x 170˝, sliding bed type gap lathe, 16˝ hole through spindle, GN10 CNC control, Stock No. 3849
SAFOP 63˝x 236˝, C axis, live tooling on programmable turret, Siemens 840D CNC control, Stock No. 3791
HITACHI 29˝ swing, Turret Lathe, 6.25˝ hole through, Stock No. 3183
MORI SEIKI 27˝x 35˝, Model SL6, Fanuc 6T, 1981, equipped with tailstock, 12 station turret, Stock No. 4173
AWOH+AMUKO 11˝x 13˝ CNC Lathe, Model HJ-28, 18” swing, Fanuc 21iTB Control, 8 position turret, 2004. 2 Available. Stock 4156 & 4157
SMTCL HTC2050, 8˝x 20˝, CNC turning center, FANUC control, tailstock, low hours, like new, 2010.
DMG CTX-410, 2008, 365mm turning diameter, 505mm swing, 66mm bar diameter, 1700 hours.
Vertical Lathes BERTHIEZ 62˝ table, 75˝ swing, Model
TVM 125, 1997, Fanuc 15T, 95kw main spindle, Live tooling, tool and part probes, very heavy duty, Stock No. 4079
SCHIESS 40˝ table, 55˝ swing, Model 14DKE100, updated electrics, fresh paint, Stock No. 4071
BULLARD Man-Au-Trol, 42˝ table, equipped with side head, from an aerospace facility, gently used, Stock No. 4205
OKUMA+HOWA ACT 2SP-V3, 10˝ chucks, twin spindle, Fanuc 0TT, 12 position turrets, 30HP spindles, Stock No. 4219
Cylindrical Grinders SCHAUDT 13˝x 27˝, Universal Heavy
Duty, Stock No. 3826
B&S 10˝x 48˝, Brown & Sharp, Model 1048 Microstatic, Stock No. 3825
Milling Machines HECKERT 16˝x 63˝, Model No. FSS 440
V1/2, Heavy Duty, Universal, Stock No. 3686
Horizontal Boring Mills TOS WD130, 130mm spindle,
Floor type boring mill, FAGOR 8055 CNC, 232˝x 97˝ travel, 90˝x 84˝ G&L table, linear scales, under power, Stock No. 4353
TOS W100A, 1988, FAGOR DRO, tailstock
SCHARMANN 125mm spindle, Model Ecocut, Siemens 880 Ctrl, 3000 RPM, 50 HP spindle, built in CNC Facing head, 2 pallets, 50˝x 63˝
SUMMIT 130mm Spindle, New in 1989, 79˝x 72˝ table, good travels, facing head, pendant controls, good condition.
Surface & Blanchard Grinders
ARTER Rotary Surface, Horizontal Spindle, Stock No. 3827
SHIBAURA 48˝, Model No. KRT-8D, Blanchard Style, Stock No. 3684
Machining Centres TOS 12˝x 51˝, Model FV 25, FAGOR
CNC control, box ways, priced to sell, Stock No. 3710
LEADWELL 20˝x 30˝, Model MCV-760XL, FANUC 0 CNC Control, 20 position ATC, Stock No. 3453
BRIDGEPORT 20˝x 40˝ CNC VMC, Model VMC1000/22, 6000 RPM, 40 taper, 1998, Stock 4159
BOSTOMATIC 32G Graphite VMC, 42K spindle, 4th axis.
Miscellaneous IEMCA Bar feeder, 2.55˝ bar capacity,
3600mm bar length, Stock No. 4066
DANDREA CNC facing head
DO-ALL Horizontal Bandsaw, Model C-916A, Stock No. 3466
AMADA Punch Grinder, Stock No. 3463; Granite Table, 150˝x 150˝, Massive!, Stock No. 3418
ARCHDALE Radial Drill, Stock No. 4211
PRATT & WHITNEY Jig Grinder, Model No 20, Pratt and Whitney rotary table, from an aerospace facility, gently used, Stock No. 4215
AMERICAN Radial drill, 5´ arm, 17˝ column, 5MT spindle taper, power quill travel, Stock No. 4237
PFAUTER Gear hobber, Model P900 Turbo, 36˝ max workpiece diameter, 2.5 max DP, 24˝ axial travel, max hob 7-3/8˝ dia x 9˝ long, Auto hob shift, swing away tailstock, change gears, Stock No. 4253
FLOOR PLATES Various sizes
Toronto Office: 905-676-9265 USA Office: 412-421-1211www.dipaolocnc.com [email protected]
NEW & USED MACHINERY
OTHER SERVICESOn-Site spindle taper grinding
Machine tool calibration and metrology
Mechanical, Electrical and CNC field service
Installations and plant moves
Spare parts including exchange programs
Authorized distributor for Heidenhain,Fagor, Fanuc FA, Siemens and Renishaw.
Certified Appraiser on staff
Way Grinding
Gantries andVertical Boring Mills
Cylindrical, Surface, Rotary, and Vertical
Grinders
CNC Milling Machines and Machining Centers
Universal 5 Axis Milling Machines
Heavy DutyCNC Lathes
Horizontal Boring Mills, Milling Machines,
Machining Centers
Double Column Vertical
Machining Centers
LGB Model R5030, Hydraulic surface grinder, 11.8” x 23.6” magnetic chuck, 1997, Stock 4598.
KASTO Horizontal bandsaw, Model SBA-220 AU, 1985, Stock No. 4567
TRANSFORMERS Various sizes and voltages
LEVELING SHOES Various sizes available
CNC CONTROLS motors, and drives, various
Clue March, 2016 Page 3
Page 4
PAGE 4 CLUE, March 2016
63 Maplecrete Road, Concord, Ontario, L4K 1A5 Canada
Tel: (905) 669-7507 ! Fax: (905) 669-7512e-mail: [email protected] ! web: www.tradermachinery.com
AIR COMPRESSORS5hp CAMERON, Piston type
BENDERS, HYDRAULIC5-1/2" ENERPAC, Hyd. Pipe bender, w/assisted tooling
BORING MILLS, VERT63"sw TOSHIBA, TMC-13(3), CNC, C-axis w/ Fanuc 32i
BRAKES, PRESS30 to 3000 Ton “NEW” ACCURPRESS Models CNC35 Ton x 6’ ALLSTEEL, No. 35-6, Manual BG45 Ton x 4’ “NEW” ACCURPRESS, S4504, CNC, Y, X, R, Crowning, Laser safety50 Ton x 4’ “NEW” ACCURPRESS, SH5004, Hybrid, CNC Touch screen55 Ton x 6’ PACIFIC, Hurco CNC, Single-axis60 Ton x 8’ ACCURPRESS, 7608, 2-Axis CNC, Light curtains60 Ton x 8’ ACCURPRESS, No.7608, Autogauge G24 Backgauge, ETS100 Ram65 Ton x 6’ ALLSTEEL, No. 6508 (2001), Automec single axis, BG70 Ton x 10’ ALLSTEEL, Hyd.75 Ton x 10’ “NEW” ACCURPRESS, CNC110 Ton x 10’ AMADA, RG100 (1998), NC-9EXII Ctrl, Safety lights120 Ton x 8’ ALLSTEEL, CNC, Single-Axis Gauge130 Ton x 10’ “NEW” ACCURPRESS, CNC200 Ton x 12’ “NEW” ACCURPRESS, CNC250 Ton x 12’ “NEW” ACCURPRESS, CNC750 Ton x 16’ CHICAGO, Hyd. CNC Automec 2-Axis, Safety lights, Guarding
DRILLS, COLUMN & BENCH1-3/8"cap “NEW” DRILLMASTER, Z5035, Geared Head
DRILLS, RADIAL3’ arm “NEW” TONE FAN, RD-9003’ Arm SUNLIKE, 1500rpm, w/work table4’ Arm DARBERT, TF-1100 (2003)9’arm SHENYANG, Box table
EDM, WIRE NC/CNCX-23.6" Y-15.7" Z-16.5" MITSUBISHI, MV-2400-ST (2013), CNC Wire EDM
GRINDERS, CYLINDRICAL12"x 40" KIKINDA, w/I.D. Grinding
GRINDERS, SURFACE, RECIPROC6" x 18" “NEW” KENT, KGS-2006"x 18" FORWARD, Manual8"x 18" FREJOTH, Automatic, Hyd.10"x 20" ACER, 3-Axis, Fully Auto, Hyd. Coolant12"x 24" OKAMOTO (2007), CNC, Fanuc 21MB12"x 24" CHEVALIER, FSG-1224AD
HONESSUNNEN, MBC-1804M & MBC-1802MR, Power Stroke, Horiz.SUNNEN, MBB-1660K, ManualSUNNEN, MBB-1650, Manual, Asst’d Tooling & Cabinet
PRESSES, INSERTION4 Ton HAEGER, w/Stand8 Ton PEMSERTER, Series 2000 (2002), PLC control
IRONWORKERS55 Ton “NEW” MAKO, Universal, 5"x 5"x 3/8" angle
LASERS2000 Watt - 33 Ton AMADA, ApelioIII, 375V, Hyd Punch/Laser Machine3000 Watt BYSTRONIC, Bystar 2512 (2002), 4’ x 10’5000 Watt TRUMPF, L3050 (2005), 5’ x 10’
LATHES, ENGINE12" x 40" “NEW” MORTON, F1900-AEG (2001), Single Phase13"x 40" SHUN CHUAN (2004), 2-Axis DRO, steady/follow rest14"x 40" JIMT, JIMT360, Toolroom, 10" chk18" x 60" “NEW” POWERTURN, 46063"X 106" BOKO, D82H, Semi-Automatic Spinning lathe
LATHES, N/C & CNCDMG, CTX 410 (2008), Live tool, Fanuc 32, Excellent!OKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw, 2" Bar capMORI SEIKI, SL150S (1997)MORI SEIKI, NL2500/700 (2006), MSX850 Control, 10"Chk, live holders, C&Y Mill capHAAS, SL-20 (2005), Live ToolROMI, M17 (2007), 17"x 43", Fanuc 21i, 8"ChkTOOLMEX, TUR560MN-2000 (2012), 22"x 78.7", Siemens 840D, 16" Chk.TOOLMEX, TUR630AMN-3000 (2008), 24.8"x 118", Siemens 840D, 16” Chk.
HYUNDAI, L300 LA (2013), 29.5"SW, 52" Mach. Length, Fanuc Oi-TD, High Accuracy, HighProduction, 12"Chk
MACHINING CTRS, HORZOKUMA, MX-60HB (1997), X-39.37" Y-31.5" Z-31.8", OSP7000
MACHINING CTRS, VERTHAAS, VF1 (2005), X-20" Y-16" Z-20", 15,000 rpmFADAL, VMC40, X-22" Y-16" Z-20", CNC 88 CtrlHAAS, VF-2SS (2011), X-30" Y-16" Z-20", 12,000rpmMIKRON, HSM-600U (2006), X-31.4" Y-23.6" Z-19.7", 5-Axis high speedMAKINO, S56 (2007), X-35.4" Y-19.7" Z-17.7", Professional 5 CNC, 13,000 rpmMILLTRONICS, RH20 (2000), X-40" Y-20" Z-24", Centurion 6 controlOKK, MCV-560 (2001), X-41.3" Y-22.04" Z-22.04", Fanuc 16iM, CTS, 50 tap.HURCO (2013), 5-Axis, X-42" Y-24" Z-24"HAAS, VF-5 (2013), X-50" Y-26" Z-32", 50 TaperDAHLIH, MCV-1500 (1996), X-59" Y-24" Z-27", 3500rpmDAHLIH, MCV-1700, X-67" Y-33" Z-29", 3500/6000rpm, 1997/2001
MILLS, VERTICAL9"x 42/48" BRIDGEPORT, w/Fagor DRO9"x 42" FIRST, LC 1-1/2 VS (2011), 2-Axis Heidenhain DRO9" x 49" "NEW" MAGNUM-CUT, VM-2V, 3hp9"x 49" EXCELLO, 60210"x 50" TOPWELL, No.5VK, 2-Axis Anilam DRO, Power Drawbar10" x 54" "NEW" MAGNUM-CUT, VM-4V, 40 Taper, 5hp12"x 51" TOS, FNK2 (1999), DRO, P/F, V/S
MILLS, VERTICAL, CNC9"x 49" BRIDGEPORT, Acu-Rite MillPower 3-Axis CNC, R8 Taper10"x 50" SOUTHWESTERN INDUSTRIES, TRAK K3 (2002)
NOTCHING MACHINES9"x 9"x 1/8" STRIPPIT, Hyd.
PLASMA CUTTING MACHINES100 Amp MESSER MG (2000), 6’x 10’, Hy-Definition, CNC plasma, Metalmaster II
PRESSES, OBI40 Ton BROWN BOGGS, Air Assist Clutch80 Ton BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x 36"bed
PUNCHES, SINGLE STATION60 Ton FABMASTER (2011), Like new
PUNCHES, TURRET16.5 Ton WIEDEMANN, Centrum 1000Q, w/Tooling, Fanuc OP22 Ton STRIPPIT, 1250/H20 (1998), 197" x 50" Max. sheet size25 Ton TRUMPF, TC500/1300, 50"x 100"33 Ton AMADA, 357 Queen (1998)33 Ton AMADA, Vipros 358 King II, 58 Stn, Fanuc 18P33 Ton AMADA, EMK 3610NT (2007)50 Ton WIEDEMANN, Vectrum 5000, 72"x 60", 60" Throat, 54 Stn, tooling
ROLLS, ANGLE BENDING2"x 2"x 3/16" "NEW" (Demo) TAURING, SAF DS 50HV, Hydraulic2.2"x 2.2"x 1/4" TAURING, SAF DS 60 HV6"x 6"x 1/2" PULLMAX, Z43, Hydraulic, Pendant Control, Digital Readout
ROLLS, PLATE BENDING1.575"x 10" MG, Hyd, 4-Roll1"x 10’ PULLMAX, PV7H, Hyd., 3-Roll Double Pinch
SAWS, BAND, HORIZONTAL9"x 16" DOALL, Semi-Auto10"x 15" "NEW" ACRA, Speeder FHBS-250V12"x 14" RAM, Semi-Auto
SAWS, BAND, VERTICAL9"x 16" DOALL, C916, Horizontal, Semi-Automatic10"x 13" BAXTER, No.115B, Roll-In-Saw12"x 14" RAM, Vertical Roll-In Saw
SHEARS, POWER SQUARING10ga x 4’ ALLSTEEL, Hyd, FOPBG1/4"x 10’ "NEW" ACCURSHEAR, No.6250103/8"x 8’ ACCURSHEAR (1998), Hydraulic
MISCELLANEOUSBarfeeder SPACESAVER, 4’ SMW, Autoload 12.65Barfeeds LNS, Servo S3, (2007 & 2013) w/Remote pendantGundrill 3/4" x 30", ELDORADO, M75-1041Spot Welder 20 KVA, SIPSanding/Deburring Machine 37"MIDWEST (2014), w/ Dust CollectorWire Machinery "NEW" METALEX, WT250, Wire Nibbler
NEW
Page 4 Clue March, 2016
Page 5
WE BUY SINGLE MACHINES OR COMPLETE PLANTS
63 Maplecrete Rd.Concord, Ontario L4K 1A5Tel: (905) 669-7507Fax: (905) 669-7512www.tradermachinery.com
HAAS, VF-1D, 2005, 20”X, 16”Y, 20”Z,Vert. Mach. Center, 15,000 rpm
HAAS, SL-20T, 2005, CNC Turning Center,8” 3-jaw chk, 5C Collet chk.
NEW Accupress CNC Hydraulic Press Brakesavailable from stock
TRUMPF, 5000 Watt, 5’ x 10’, 2005,Siemens 840D Control
16.5 Ton, WIEDEMANN, CNC Turret Punch,No Centrum 1000Q
10” x 50”,SOUTHWESTERN INDUSTRIESTRAK K3, 2-Axis, CNC Milling Machine
Clue March, 2016 Page 5
Page 6
Page 6 Clue March, 2016
www.havlikgear.com
Introducing the FUT - TOS new generation
Leaders in gear manufacturing since 1886
Exclusive dealer for TOS Kurim
Havlik Gear (Head Office)455 Sheldon Dr., Cambridge, ON N1T 2B7, CanadaTel: (519) 624-6240 Fax: (519) [email protected]
FUT - TOS new generation
The machine is intended for machining of complex shaped work pieces by adopting the conventional technology and high speed cutting. Independent longitudinal and cross beds with a T-shape layout are the base of the machine. A longitudinal slide with a rotary, adjustable table travels along the longitudinal bed in the direction of the “X” axis. Column moves in the cross direction of the “Z” axis.The headstock moves on the guide surfaces of the column in the vertical direction of the “Y” axis.
MAIN MACHINE FEATURES• cutting-edge composite bed and column solution based
onaweldmentfilledwithaspecialconcretemix• considerable higher rigidity than in conventional struc-
tures• spindle with high torque and speed up to 6 000 rpm• high versatility of automatically interchangeable milling
heads• rapid feed rate 30 m/min• HSCmachiningfromfivesides• up to 6 contouring axis• versatile design and application • thermal stabilization of headstock and heads• long service life, accuracy and reliable operation
The FUT machine axis design goes beyond the industry and reached into the segment of horizontal boring machines where it stands out against other current manufacturers asitofferstopparametersregardingdynamicsandrigid-ity. This ensures higher labour productivity and accuracy of machined parts. The composite solution increasesdampening during machining processes, leading to longer service live of machines and the entire machinery.
Page 7
Clue March, 2016 Page 7
Page 8 / Steel Marketplace / JULY 2007
�
• APPRAISALS • FINANCING • • TRADE-INS • TOOLING •
• SHIPPING • INSTALLATIONS • • TRAINING • SOFTWARE •
VISIT US AT:www.jordancraigmachinery.com
TO VIEW A COMPLETE LIST
Check out our website for Photos, Specifications and a more complete inventory atwww. jordancraigmachinery.com
JORDAN CRAIG MACHINERY INT’L LLC, P.O Box 737, New City, NY 10956Tel: 845-398-0073 [email protected] : 845-398-0074 www.jordancraigmachinery.com
4000 WATT AMADA FOMII 3015NT LASER MFG:2012, STOCK #10395
257 TON, TRUMPF TRUMABEND V230, BRAKE PRESS, DELEM DA69 6-AXIS, CLAMPING,
CROWNING, ACB. MFG:2000 STOCK #10403
33 TON, AMADA, EMK3610NT AMNC-F,TURRET PUNCH, 60” X 100”,MFG:2007, STOCK #10361
AMADA,GEMINI FO-3015NT, 4,000 WATT, LASER, 5’X10’, APPROX HRS: 45,000
MFG:2005, STOCK #10402
22 TON, STRIPPIT, V20 1525 FANUC 180I,TURRET PUNCH, 60” X 80”, 34 STATION,
4 A/I, MFG:2011, STOCK #10413
88 TON, AMADA, RG-8024LD, BRAKE PRESS, 2-AXIS CNC, MFG:1999 STOCK #10425
AMADA 6KW LC-3015F1NT, LASER,5’ X 10’ DUAL PALLET
MFG: 2011, STOCK #10114
33 TON, AMADA, VIPROS 358 KINGII, TURRET PUNCH, FANUC 18P, 4 A/I.MP1225NJ LOAD/
UNLOAD, MFG:1999, STOCK #10383
33 TON, AMADA, PEGA 357, TURRET PUNCH, FANUC 04PC, 58STA., 2 A/I,MFG: 1994, STOCK #10382
AMADA FO MII RI 3015, 4000 WATT, LASER,5’ X 10’ ROTARY INDEX,
MFG:2012, STOCK #10320
143 TON, AMADA, HDS-1303NT, BRAKE PRESS, AMNC-PC 8-AXIS,
MFG:2006 STOCK #10426
22 TON TRUMPF, TC2020R BOSCH,TURRET PUNCH, 50” X 100”, MFG:2010
APPROX. 2800 HRS. STOCK #10411
Page 8
Page 8 Clue March, 2016
BARON-MAX MACHINING CENTRE BARON-MAX CNC TEACH-IN LATHE
MAXIMART BEDMILL
DRILLMASTER RADIAL DRILL
“SPECIAL PRICES”HEAVY DUTY LATHES
Special Pricing - Large InventoryAll New Milling Machines - Lathes & Surface Grinders
NEW MACHINES“From Stock”
S1600 - 5’3” ArmTF1280H - 50“ ArmTF1100 - 44” ArmTF900 - 36” ArmTF 750 - 30” ArmMXB5 - 47”x 23”x 24” Travel
7-1/2HP Inverter HeadManual or with Fagor 3-Axis CNC
26” x 120” x 4” Bore - 16” Wide Bed20” x 80” x 4” BoreAlso in Stock: 14“, 16”, 18”, 20“ & 22” Swing
42” x 24” x 24” Fagor Control32” x 20” x 20”
28” x 60” - 4” Bore, also 18” x 40”with Fagor CNC Control
POWERMASTER MACHINERY LTD.1048 Matheson Blvd. E. Mississauga, ON L4W 2V2
Tel: 905-624-9327 Fax: 905-624-8591e-mail: [email protected] website: www.powermaster.ca
OVER 30LATHES
IN STOCK
OVER 40MILLS
IN STOCK
2VS - 9”x49“ - R83VS - 10”x50“ - R84VS - 10”x54” - ISA40
Page 9
Clue March, 2016 Page 9
All Auctions Are Live Onsite & Online Via
UPCOMING AUCTIONS!
A U C T I O N S • L I Q U I D AT I O N S
F I N A N C I N G • A P P R A I S A L S
9 0 5 . 6 6 9 . 8 8 9 3i n f i n i t y a s s e t s . c o m
Like us at: facebook.com/Infinity-Asset-Solutions-Inc
Follow us at: twitter.com/InfinityAssets
SPECK-TECH SYSTEMS INC.Manufacturer of Automated Packaging Lines CNC Machine Shop & Inventory
40 Cardico Drive, Gormley (Toronto), Ontario, Canada
AUCTION: Tuesday March 15, 11am (ET) Inspection: Mon March 14, 9 AM to 4 PM
Featuring: MAZAK CNC Lathe model SQT 250 MSY – Live Tooling & Sub Spindle (1 of 2 CNC Lathes), MAZAK CNC VMC model VTC-20B (1 of 3 CNC VMC’s),
PEARSON 10’ x 80 Ton Hyd. Press Brake, KINGSLAND 60 Ton Ironworker, Plus Shear, Turret Punch, Lathe, Broach, VTL, Power Rolls, Saws, and Huge Quantity of
Stainless Steel Materials, Components and Stores.
DI-CUT INDUSTRIES LTD.Sale Held In Conjunction With North East Printing Machinery Inc.
Di Cutters, Folder Gluers, Polar Paper Cutter Line, Sheet Folders, Etc. 1401 Huntingwood Dr, Toronto, Ontario
AUCTION: Thursday March 17, 10:30am (ET) Inspection:Wed March 16, 9 AM to 4 PM
Featuring: 1999 BOBST Flatbed Die Cutter Model Autoplaten SP102-E-II (1 of 7 Die Cutters), 1996 BOBST Folder Gluer Model Domino 90-A1 (1 of 4 Folder Gluers), Complete2000 POLAR Cutting Line with 45” Guillotine, 2005 PACK SMART Fulfillment / Mail Table
line, Complete 2010 BUSKRO Inkjet Printing System, Cutter Plotters, Packaging etc.
2
1
ACAN WINDOWS AND DOORSOne Of The Largest Suppliers Of Vinyl Windows Patio And Entrance Doors In Canada
1641 Topsail Road, Paradise, Newfoundland, Canada
AUCTION: Wednesday April 6, 12pm (NDT) Inspection:Tues April 5, 9 AM to 4 PM
Featuring: 2011 ERDMAN Automated Insulated Glass Line, 72”x72” Capacity - $1M Replacement Cost, 8 URBAN CNC Vinyl Welders, Up to 4 Corner, As New As 2009,
2013 UNITED Drive Through Spray Booth, 2010 VEGA CNC Automated Door Line, 36” x 96”Capacity, Plus: CNC Glass Cutting Line, Screen Machines, (12) CNC Profile Cutting
Machines As New As 2013, Material Handling, Heat Treat & More. REAL ESTATE AVAILABLE FOR SALE OR LEASE
3BARON-MAX MACHINING CENTRE BARON-MAX CNC TEACH-IN LATHE
MAXIMART BEDMILL
DRILLMASTER RADIAL DRILL
“SPECIAL PRICES”HEAVY DUTY LATHES
Special Pricing - Large InventoryAll New Milling Machines - Lathes & Surface Grinders
NEW MACHINES“From Stock”
S1600 - 5’3” ArmTF1280H - 50“ ArmTF1100 - 44” ArmTF900 - 36” ArmTF 750 - 30” ArmMXB5 - 47”x 23”x 24” Travel
7-1/2HP Inverter HeadManual or with Fagor 3-Axis CNC
26” x 120” x 4” Bore - 16” Wide Bed20” x 80” x 4” BoreAlso in Stock: 14“, 16”, 18”, 20“ & 22” Swing
42” x 24” x 24” Fagor Control32” x 20” x 20”
28” x 60” - 4” Bore, also 18” x 40”with Fagor CNC Control
POWERMASTER MACHINERY LTD.1048 Matheson Blvd. E. Mississauga, ON L4W 2V2
Tel: 905-624-9327 Fax: 905-624-8591e-mail: [email protected] website: www.powermaster.ca
OVER 30LATHES
IN STOCK
OVER 40MILLS
IN STOCK
2VS - 9”x49“ - R83VS - 10”x50“ - R84VS - 10”x54” - ISA40
Page 10
Page 10 Clue March, 2016
Page 11
B1804 BENDERS, HYDRAULIC
5-1/2" ENERPAC, , Hyd. Pipe bender, w/assisted tooling,
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
B5500 BORING MILLS, HORZ, TABLE
TOS, W-100A (1987), Excellent Condition, $64,500, (Machinerie
Gilles Lupien Tel: 819-478-5266, Fax: 819-478-5266)
B6985 BRAKES, HAND
16ga X 10’ BROWN & BOGGS, , $3,000, (Machine Solutions
Inc. Tel: 416-220-5910 See Page 2
B7000 BRAKES, PRESS
15 Ton x 4’ CHICAGO, , Mechanical, $1,900, (Machine
Solutions Inc. Tel: 416-220-5910 See Page 2
20 Ton x 4’ ALLSTEEL, , Hydraulic, $5,500, (Machine Solutions
Inc. Tel: 416-220-5910 See Page 2
35 Ton x 6’ ALLSTEEL, No. 35-6, Manual BG, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
35 Ton x 6’ TRI-ACRO, 35-6 (1993), Hydra-Mechanical, Hurco
5C, Ref# 10204, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
45 Ton x 4’ “NEW” ACCURPRESS, S4504, CNC, Y, X, R,
Crowning, Laser safety, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
55 Ton AMADA, FBDIII5020NT (2000), “Up-Acting” 7-Axis NT
Control, Ref# 10355, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
55 Ton AMADA, RG50 (1999), Hurco Autobend 7, 2-Axis, Ref#
10354, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
55 Ton AMADA, FBD5020 (1989), NC9EXII 3-Axis CNC, 78.74"
O.A., Ref# 10391, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
55 Ton TRUMPF, V50 (2001), Prog. Z1,Z2, Clamping, Ref#
10417, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
55 Ton x 6’ PACIFIC, Hurco CNC, Single-axis, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
60 Ton x 6’ CINCINNATI, 60CBII4 (1997), 2-axis CNC Back
Gauge (Upgrade), Ref# 10370, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
60 Ton x 8’ ACCURPRESS, 7608, 2-Axis CNC, Light curtains,
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
60 Ton x 8’ ACCURPRESS, No.7608, Autogauge G24
Backgauge, ETS100 Ram, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
65 Ton x 6’ ALLSTEEL, No. 6508 (2001), Automec single axis,
BG, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
70 Ton x 10’ ALLSTEEL, , Hyd., (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
72 Ton TRUMPF, Trubend 3066 (2008), 4-Axis, 2700 Hours,
Ref# 10286, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
75 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
88 Ton AMADA, FBDIII8025NT (2001), AMNC-PC, Ref# 10340,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
88 Ton AMADA, RG80 (2000), NC 9EXII 3-axis, Ref# 10033,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
88 Ton AMADA, Astro 100M (2001), FBDIII-8025, Sold NEW in
2004, Ref# 10192, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
88 Ton AMADA, RG80S (1985), NC9EX 3-axis Back Gauge,
Ref# 10409, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
88 Ton AMADA, RG M2 8024 (2012), Ref# 10396, (Jordan
Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
88 Ton AMADA, RG-8024LD (1999), 2-Axis CNC, Ref# 10425,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
88 Ton x 98.6" AMADA, FBD 8025F (1992), “Up-Acting”, NC9F
Control, Ref# 10356, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
90 Ton CINCINNATI, 90AFX10 (2000), AutoForm 6-Axis,
Crowning, 12’ O.A., Ref# 10392, (Jordan Craig Machinery
Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
93.5 Ton TRUMPF, Trubend 5085 (2011), 6-Axis BG, Ref#
10322, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
95 Ton TRUMPF, V85 (1997), Delem Prog. Z1 & Z2, Ref#
10418, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
100 Ton TOYOKOKI, HYB 1003 (1998), 10’ O.A.,5-Axis,
European Style Tooling, Ref# 10405, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
110 Ton AMADA, Astro 100NT (2004), HDS1030, Robotic
bending cell, Ref# 10203, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
110 Ton x 8’-6’ “NEW” FERRIC, , Ferric PB Pro Falcon
2600x100, XR Back gauge, CNC crown, 2D graphic, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 20
110 Ton x 10’ AMADA, RG100 (1998), NC-9EXII Ctrl, Safety
lights, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
110 Ton x 13.5’ GASPARINI, EFB 4100x105, XR Backgauge,
CNC Crown, DNC angel prog., (used), (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 20
120 Ton ACCURPRESS, Edge 412012 (2015), 6-Axis Vision
CNC, Ref# 10415, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
120 Ton ACCURPRESS, Edge 412012 (2015), 6-Axis Vision
CNC, Ref# 10415, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
120 Ton x 12’ ALLSTEEL, , Hurco CNC, $18,000, (Machine
Solutions Inc. Tel: 416-220-5910 See Page 2
130 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
137 Ton AMADA, HFB1254/5, NEW 1995, Operateur CNC,
165", Ref# 10214, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
138 Ton AMADA, FBD1253NT (1999), Up-Acting CNC, Ref#
10385, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
138 Ton AMADA, FBD1253NT (2003), Up-Acting CNC, Ref#
10389, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
143 Ton AMADA, HDS-1303NT (2006), AMNC-PC 8-Axis, Ref#
10426, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
144 Ton TRUMPF, V130 (1997), Delem Prog. Z1 & Z2, Ref#
10419, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
150 Ton x 10’ “NEW” FERRIC, Speed Bend Pro, 3100x135,
XRZ1Z2 back gaug, CNC crown, 2-3D prog. off line software,
(Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 20
165 Ton x 12’ HACO, ERM 36150, 6 axes CNC BG, CNC,
Crown, AKAS Laser BC59, 2D Graphic (used), (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 20
165 Ton x 12’ HACO, ERM 36150, CNC backgauge, ATS560
ctrl & tooling (used), (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 20
170 Ton x 12’ VERSON, , Mechanical, (Machine Solutions Inc.
Tel: 416-220-5910 See Page 2
175 Ton x 12’ ACCURPRESS, Advantage 717512 (2004),
ETS3000 3-Axis, Ref# 10273, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
175 Ton x 12’ “NEW” TOSKAR, , CNC 4-axis Touch graphic
Manual crown tooling, quick release clamping, (Machine
Solutions Inc. Tel: 416-220-5910 See Page 2
193 Ton x 10’ “NEW” FERRIC, , PB Pro Falcon 3100x175, XR
Back gauge, CNC crown, 2D graphic, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 20
193 Ton x 12’ “NEW” FERRIC, , PB Pro Falcon 3760x175, XR
Back gauge, CNC crown, 2D graphic, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 20
200 Ton x 12’ “NEW” ACCURPRESS, , CNC, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
220 Ton x 13’ FISHER, , XR BG, CNC Crown Cybelec DNC900
control, (used), (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 20
PAGE 16 CLUE, February, 2016
CLASSIFIED - LISTING YOUR MACHINERY AND EQUIPMENT TODAY
LEADS TO SUCCESSFUL SALES TOMORROW
Don't Delay! Phone: (905) 528-7765 Fax: (905) 917-0222
Clue March, 2016 Page 11
Page 12
CLUE, April 2014 PAGE 17
B7000 BRAKES, PRESS I6200 IRONWORKERS
242 Ton x 12’ “NEW” FERRIC, , PB Pro Falcon 3760x220, XR
Back gauge, CNC crown, 2D graphic, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 20
242 Ton x 12’ “NEW” FERRIC, SB Pro 3760x220, XRZ1Z2
backgauge, CNC crown, ER90 Plus 2D-3D offline incl.,
(Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 20
250 Ton x 12’ “NEW” ACCURPRESS, , CNC, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
257 Ton TRUMPF, Trumabend V230 (2000), Delem DA69
6-Axis, Clamping, Crowning, ACB, Ref# 10403, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
350 Ton x 12’ “NEW” FERRIC, , PB Pro Falcon 3760x350, XR
Back Gauge, CNC Crown, 2D graphic, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 20
40-400 Ton x 5-16’ “NEW” TOSKAR, , Hydraulic, (Machine
Solutions Inc. Tel: 416-220-5910 See Page 2
400 Ton x 17’ CINCINNATI, , Mechanical, (Machine Solutions
Inc. Tel: 416-220-5910 See Page 2
600 Ton x 16’ ALLSTEEL, , Hydraulic, $27,000, (Machine
Solutions Inc. Tel: 416-220-5910 See Page 2
750 Ton x 16’ CHICAGO, , Hyd. CNC Automec 2-Axis, Safety
lights, Guarding, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
1750 Ton PACIFIC, Fabri-K 1750-40/36 (2007), Cybelec 8805,
Ref# 10242, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
D0654 DEBURRING MACHINES
37" MIDWEST, (2014), w/ Dust Collector, Sanding/Deburring
Machine, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
D5700 DRILLS, RADIAL
3’ Arm SUNLIKE, , 1500rpm, w/work table, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
5" BERGONZI, TM50/1600, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
E2400 ELECTRIC DISCHARGE MACHINES
50 AMP RACER, BR400ENC, 40"x 22" Tank, (Powermaster
Machinery Ltd Tel: 905-624-9327, Fax: 905-624-8591)
See Page 8
F5006 FURNACES
Heat Treating , New & Reconditioned, Powered by Electric,
Gas, Oil, Propane, for all purposes, (Park Thermal
International Tel: 905-877-5254, Fax: 905-877-6205)
G4706 GRINDERS, CYLINDRICAL
12"x 40" KIKINDA, , w/I.D. Grinding, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
G8025 GRINDERS, SURFACE, RECIPROC
6"x 18" FORWARD, , Manual, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
8"x 18" FREJOTH, , Automatic, Hyd., (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
8"x 20" JONES & SHIPMAN, , $1,900, (Machine Solutions Inc.
Tel: 416-220-5910 See Page 2
8"x 24" TOS, BRH20, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
12"x 24" CHEVALIER, FSG-1224AD, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
10"x 20" CHEVALIER, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
H6004 HONES
SUNNEN, , MBC-1804M & MBC-1802MR, Power Stroke, Horiz.,
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
SUNNEN, MBB-1660K, Manual, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
SUNNEN, MBB-1650, Manual, Asst’d Tooling & Cabinet, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
I4775 PRESSES, INSERTION
4 Ton HAEGER, , w/Stand, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
8 Ton PEMSERTER, Series 2000 (2002), PLC control, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
I6200 IRONWORKERS
50 Ton “NEW” FERRIC, HIW 45, Single Operator, 5 Stations,
(Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 20
60 Ton “NEW” FERRIC, HIW 60 DC, Dual operator, 5 stations,
(Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 20
Z9000 MISCELLANEOUS Z9000 MISCELLANEOUS
PAGE 22 CLUE, April 2012
MACHINERY ADVERTISER
PUBLISHER
David Stapleford
PRINTED BY:
Ricter Web Printing
DELIVERY
Clue is delivered monthly and is sent bythird class mail on or before the businessday following the seventh of each month
DEADLINE
The deadline for advertising is the dayfollowing the last Wednesday of the month
ADDRESS
343 Smith AveBurlington, ON, L7R 2T9
Phone: 905-528-7765Fax: 905-917-0222
www.cluemachines.com
e-mail: [email protected]
MUST SELL
Cincinnati 10ga x 10'
Power Squaring Shear
Bliss #21
Punch Press
Contact: TCL Asset Group Inc.Ph: 416-736-1367 x228
Website: www.managingyourassets.com
Alberta
B F G Machine Tools Inc., Edmonton (Brian) ...................................780-434-7795........780-436-0717 .......15
British Columbia
ECCO Machinery, Surrey (Rick) ......................................................778-298-2023........778-298-2024 .......17
Modern Tool (BC) Ltd, Port Coquitlam (Pam) ..................................604-472-1444........604-472-1455 .......16
Ontario
Brighton Machinery Sales Inc, Ingersoll (Brian) ...............................519-485-7089........519-485-7368 .......15
Cameron Steel, Lindsay (Bob) ........................................................705-878-0544........705-878-0560 .......21
Compumachine Canada, Toronto (Peter).........................................416-291-9499........416-291-4990 .......22
Corporate Assets Inc, Toronto (Daphne) .........................................416-962-9600........416-962-9601 .......27
Dipaolo CNC Retrofit Ltd., Mississauga (Nelson) ............................905-676-9265 ......................................10
Fabtec Machine Tool Solutions Inc, Oakville (Raj)............................905-469-1586........905-469-3054 .......18
Ferric Machinery Inc, Mississauga (Koen) ......................................877-337-7424........905-820-3234 .........3
Haco Canada, Mississauga (Francis)..............................................905-828-1087........905-828-2062 .......26
Havlik Int’l Machinery, Cambridge (John) ........................................519-624-6240........519-624-4119 .......13
Hayden Lee, Markham (Hayden) ....................................................905-201-7841........905-201-7842 .......14
Hove Machine Services, Wasaga Beach (David) .............................705-429-5910........705-429-1557 .......15
Infinity Assets Solutions, Concord (Leslie) ......................................905-669-8893........905-669-7512 .........2
L S Walker Machine Tools Inc, Milton (Chris) ..................................905-876-0890........905-876-1959 .......12
Machine Solutions Inc., Guelph (Andrew) .......................................416-276-0596 ......................................25
Micro Trend Robotics Inc, Pickering (Peter) ....................................905-509-1218........905-509-2687 .......15
Nimesch Machinery, Markham (George) .........................................416-786-7762........905-415-3868 .........1
Nova International, Mississauga (Richard) ......................................905-624-4522........905-624-1917 .......15
Park Thermal International, Georgetown (Sales) ..............................905-877-5254........905-877-6205 .......15
Phase Quest, Mississauga (Harold) ................................................416-578-5399........416-753-7209 .......15
Powermaster Machinery Ltd, Mississauga (Peter)...........................905-624-9327........905-624-8591 .........5
S K Braly Machinery Inc, Mississauga (Steve) ................................905-793-8080........905-793-2190 .......23
Sabito Machinery Inc, Vaughan/Concord (David) ............................905-738-8730........905-738-5148 .........4
Stan Canada Machinery & Equipment Ltd, Brampton ......................416-252-5767........416-252-4770 .......15
TOS Trade Canada Inc., Milton (Marian)..........................................905-878-0888........905-878-9022 .......28
Trader Machinery Inc, Concord (Jonathan) .....................................905-669-7507........905-669-7512 .........6
Quebec
Boulanger Machinerie Inc, St-Ferdinand (Ben).................................418-428-4709........418-428-4710 .......15
Camex Machinery, Montreal (Elias).................................................514-581-5370........888-414-6441 .......17
Machinerie Gilles Lupien, Drummondville (Gilles)............................819-478-5266........819-478-5266 .......23
Machinery S. Tremblay, Drummondville (Sylvain)............................819-477-6677........819-477-6466 .......15
Soudogaz, St-Lambert de Lauzon (Charles)....................................418 889-2002 ........418 889-2012........25
Stock Machine Tools Co, Laval (Andre) ..........................................514-326-7006........514-329-2599 .......15
USA
Jordan Craig Machinery Int’l Inc, New City, NY (Jordan)..................845-398-0073........845-398-0074 .........8
S R I Advertising, Encino, CA (Susan) ............................................818-761-1792........818-793-0351 .......25
Y.Franke & Company, LLC., Hoffman Estates, IL (York)....................847-874-8972........847-596-8006 .........9
COMPANY PHONE FAX PAGE
ADVERTISERS DIRECTORY
CERTIFIED EQUIPMENT APPRAISALS * Toronto, OntarioPhone: (905) 793-8080 Fax: (905) 793-2190 Email: [email protected]
W W W . S K B R A L Y . C O M
CLUE, July 2010 Page 3
BRAKES, PRESSPACIFIC, 35-6, 35 Ton x 6’ CNCCHICAGO, BPO-412-6, 12ga x 48" Box & PanAMADA, RG-100, 110 Ton x 10’ CNC
DRILLS, MISCELLANEOUSSAALFELD, BS50 Pillar drill, 2" capacityBERGONZI, TM1600, 5’ Radial drillDOALL, TG-17 Geared Head drill
FACING & CENTERINGSENECA FALLS, EW-75 CNC w/Milling stationSENECA FALLS, EW-75 CNCSENECA FALLS, CS-LO, 5"x 42"
GRINDERS
KENT, KGS-200, 6"x 16" Manual surface grinderJONES & SHIPMAN, 540P, 6"x 18" HydraulicBROWN & SHARPE, Micromaster, 6"x 18" HydraulicNICCO, NFG-515HD, 6"x 20" Form grinderTOS, BRH20-02, 12"x 24" Hydraulic surface grinderBROWNE & SHARPE, 12"x 24"DECKEL, S1 Multi Axis, Tool & CutterBLANCHARD, 16" Vertical surface grinderTSCHUDIN, HG-400, 8"x 16", CylindricalSTUDER, S-36, 13"x 40" CNC, Cylindrical
LATHES, CNCDAEWOO, 10 HC CNC Turning CentreMAZAK, Super Quadrad 200 4-AxisCHEVALIER, FCL-1840, 18"x 40" Flatbed cnc lathe
LATHES, ENGINE
HARDINGE, HLV-H, 11"x 18" Precision LatheHARDINGE, HLV-H, 11"x 18" with DROMONARCH, EE, 12-1/2"x 20" Precision Engine LatheERL1340, 13"x 40" DRONAMSEON, 17"x 55"MORI SEIKI, MR-1500, 20"x 60"CHIEN YEH, 20"x 60"CHIEN YEH, CY560, 22"x 80"TOS, SN63/2000, 24"x 80"MORANDO, 24"x 120"PBR, TM-300, 24"x 196"
MACHINING CTRSENSHU, JE30S, Horz.OKUMA, MA40-HA, 16", Horz.MORI-SEIKI, NV-5000, Vertical
MILLS, VERTICALFIRST, LC, 9"x 42" 1-1/2EXCELLO, 602, 9"x 42"BRIDGEPORT, 9"x 42"FIRST, LC20VH, 10"x 50" Vert/HorizTOPWELL, 5VK, 10"x 50"DECKEL, FP 4, 16"x 28", Universal
PRESSES, HYDRAULICDAKE, PSM-20, 20 Ton manual, H-Frame shop press
PUNCHES, TURRETSTRIPPIT, 18-30
SAWSSTARTRITE, H330MV, 12", HorizontalDOALL, C916, 9"x 16", HorizontalGROB, 4V-18, 18", VeritcalDOALL, 36", VerticalSOCO, MC350 NFA Automatic cut-off saw, non-ferrous
SHEARS, POWER SQUARINGDIACRO, 16ga x 24" Hand shear with standEDWARDS, True-Cut, 10ga x 48"AMADA, M-2560, 1/4"x 8’
WELDERSAIRCO, CV-200 Aircomatic mig welder w/ wire feed15KVA FH Spot welder w/ Holden Hunt TransformerPRECISION, 50KVA Spot welder
TOOLINGWAHLI, MXH 300/200 Tool setter
MISCELLANEOUSBelt/disc sander, ROCKWELL DELTA, 429/02End Finishing Machine, SOCO, EF-PV/52Flex Arm Tapper, ROSCAMAT, 300Hot Melt Machine, BENCHMARK, 205-HPHot Melt Machine, BENCHMARK, 525Lapping machine, DOALL, Lapmaster, 16"Thread Rolling Machine, SHENG JIAN, Z28-63Tilting box table, 30"x 24"x 22"
Page 12 Clue March, 2016
Page 13
I6200 IRONWORKERS L0850 LASERS
PAGE 18 CLUE, April 2014
65 Ton “NEW” FERRIC, HIW 60, Single operator, 5 stations,
(Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 20
75 Ton KINGSLAND, 75XS, Dual operator, 5 stations (used),
(Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 20
80 Ton “NEW” FERRIC, HIW 80 DC, Dual operator, 5 stations,
(Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 20
100 Ton “NEW” FERRIC, HIW 100 DC, Dual operator, 5
stations, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 20
125 Ton “NEW” FERRIC, HIW 125 DC, Dual operator, 5
stations, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 20
55 Ton to 120 Ton “NEW” DURMA, , (Machine Solutions Inc.
Tel: 416-220-5910 See Page 2
100 Ton OMERA, , Mechanical, $3,900, (Machine Solutions Inc.
Tel: 416-220-5910 See Page 2
L0850 LASERS
2000 Watt “NEW” FERRIC, Fibermak, 60 x 120, Beckhoff
control, Lantek Expert, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 20
2000 Watt AMADA, LC1212A3XL (2004), 4’ x 8’, 17,000 hours,
New turbo blower, Ref# 10175, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
2000 Watt SALVAGNINI, L3 Fiber (2011), 5’x 10’, Ref# 10255,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
2000 Watt AMADA, Pulsar LC1212A2 (1998), 28,300 Hrs, New
Turbo Blower @ 23,400, Ref# 10406, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
2000 Watt AMADA, Pulsar LC2415XLA3 (2000), Current
Machine Hours 34,000, Ref# 10414, (Jordan Craig Machinery
Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
3000 Watt “NEW” FERRIC, Fibermak, 60 x 120, Beckhoff
control, Lantek Expert, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 20
3000 Watt “NEW” FERRIC, Fibermak, 78 X 160, Beckhoff
control, Lantek Expert, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 20
3000 Watt TRUMPF, L2530 (1999), 4’x 8’, Siemens, 9483
Beam on hours, Ref# 9753, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
3000 Watt BYSTRONIC, BySprint Fiber 3015, Installed New:
2013, Ref# 10253, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
3200 Watt TRUMPF, TCL-3030 (2001), 5’x 10’, Ref# 9914,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
3.2KW TRUMPF, L2030 (2009), 5’x 10’, Auto Loader/Unloader,
Ref# 10432, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
3500 Watt TANAKA, TF-3500B (1996), 8’ x 95’, Fanuc 16L,
Ref# 10287, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt “NEW” FERRIC, Fibermak, 60 x 120, Beckhoff
control, Lantek Expert, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 20
4000 Watt AMADA, FO MII RI 3015 (2012), 5’x 10’ Rotary
Index, Ref# 10320, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt TRUMPF, Trulaser (2006), 5’x 10’, 22,000 Beam on
hours, Ref# 10325, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt TRUMPF, Trulaser 3040 (2011), 80"x 160", Dual
Pallet, Ref# 10260, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt AMADA, Gemini FO4020 (2003), 80"x 160", Dual
Pallet, Ref# 10262, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt AMADA, FOMII 3015NT (2012), Ref# 10395,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
4000 Watt AMADA, Gemini FO-3015NT (2005), 5’x 10’, Aprrox.
Hrs: 45,000, Ref# 10402, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt MAZAK, Hypergear 510 (2006), Installed New:2008,
Less than 8500hrs, Ref# 9707, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt AMADA, Pulsar 2415NTA4 (2010), 8,500hrs, Ref#
10123, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
4000 Watt TRUMPF, TCL3030 (2002), Siemans CNC, 60"x
120", Ref# 10412, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4KW TRUMPF, Trulaser 3030 (2009), 5’x 10’, 22 Shelf
Tower/Liftmaster, Ref# 10431, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt AMADA, LC3015F1NT (2012), 5’x 10’, Approx. 12,
000hrs, Ref# 10434, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
5000 Watt TRUMPF, L3050 (2005), 5’ x 10’, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
5 KW TRUMPF, Trulaser 3030 (2010), 5’x 10’, Liftmaster,
Approx. 5000 Beam on hrs, Ref# 10352, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
5000 Watt HK, FL-3015 (2011), 5’x 10’, Ref# 10259, (Jordan
Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
Clue March, 2016 Page 13
Page 14
L0850 LASERS M2824 MILLS, VERTICAL
5200 Watt BYSTRONIC, Byspeed 3015 (2005), 5’x 10’, Ref#
10072, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
6000 Watt TRUMPF, Trulaser 5030 (2008), Liftmaster, Ref#
10336, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
6KW AMADA, LC-3015F1NT (2011), 5’x 10’, Dual Pallet, Ref#
10114, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
6KW BYSTRONIC, Bystar 4020 (2011), Rotary Axis &
Automation, Ref# 10422, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
MAZAK, FMS-A48-12 (2004), 6 Shelf loader, Ref# 9720,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
L2150 LATHES, CNC
OKUMA ROBUSTURN, LFS15-2SP (1999), Twin Spindle,
4-axis, Dual chk, Dual Turret turning center, (Machinerie
Gilles Lupien Tel: 819-478-5266, Fax: 819-478-5266)
L3000 LATHES, ENGINE
12"x 36" LOGAN (by Powermatic), 2557 VLH, Variable speed, 3
& 4 jaw chucks, collets., (Brighton Machinery Sales Inc
Tel: 519-485-7089, Fax: 519-485-7368)
13"x 40" SHUN CHUAN, (2004), 2-Axis DRO, steady/follow
rest, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
14"x 40" JIMT, JIMT360, Toolroom, 10" chk, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
16"x 40" ACRA, , DRO, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
18" x 60" “NEW” POWERTURN, 460, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
22"x 80" CHIEN YEH, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
26"x 120" CHIEN YEH, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
63"X 106" BOKO, D82H, Semi-Automatic Spinning lathe,
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
L6135 LATHES, N/C & CNC
OKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw, 2"
Bar cap, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
MORI SEIKI, SL150S (1997), (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
MORI SEIKI, NL2500/700 (2006), MSX850 Control, 10"Chk, live
holders, C&Y Mill cap, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
HAAS, SL-20 (2005), Live Tool, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
12"x 40" HYUNDAI, HIT-30-S (1995), Seimens 840C, Over Bed
20", Mint cond., (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266)
22"x 78.7" TOOLMEX, TUR560MN-2000 (2012), Siemens
840D, 16" Chk., (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
24.8"x 118" TOOLMEX, TUR630AMN-3000 (2008), Siemens
840D, 16” Chk., (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
M0130 MACHINING CTRS, HORZ
OKUMA, MX-60HB (1997), X-39.37" Y-31.5" Z-31.8", OSP7000,
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
M0185 MACHINING CTRS, VERT
HAAS, VF1 (2005), X-20" Y-16" Z-20", 15,000 rpm, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
HAAS, VF-2SS (2011), X-30" Y-16" Z-20", 12,000rpm, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
OKUMA, MX-45 VAE (1999), X-30" Y-19" Z-18", Table 40"x 20",
only 5378 hrs. cutting time, (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266)
MAKINO, S56 (2007), X-35.4" Y-19.7" Z-17.7", Professional 5
CNC, 13,000 rpm, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
HURCO, (2013), 5-Axis, X-42" Y-24" Z-24", (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
HAAS, VF-5 (2013), X-50" Y-26" Z-32", 50 Taper, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
M0850 MEASURING MACHINES
SHEFFIELD, Cordax D-28 (2009), Discovery III, Ref# 9855,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
M1550 MILLS, CNC
SUPERMAX, , Knee type Centroid CNC, (Powermaster
Machinery Ltd Tel: 905-624-9327, Fax: 905-624-8591)
See Page 8
JAFO, , Ram Type, Heidenhain, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
M1659 MILLS, UNIVERSAL
10"x 50" TECHLEADER, , 5hp, 2 axis read-out, powerfeed, $5,
500, (Machine Solutions Inc. Tel: 416-220-5910 See Page 2
10"x 50" FIRST, , Horz/Vert, DRO, (Powermaster Machinery
Ltd Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
M2824 MILLS, VERTICAL
9"x 42/48" BRIDGEPORT, , w/Fagor DRO, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
9"x 42" FIRST, LC 1-1/2 VS (2011), 2-Axis Heidenhain DRO,
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
CLUE, April 2014 PAGE 19
British Columbia
Masteel, Delta (Mary) ......................................................................604-952-4434.........604-952-4432 ........10
Modern Tool (BC) Ltd, Port Coquitlam (Pam) .................................604-472-1444.........604-472-1455 ........16
Manitoba
Empire Machinery & Tools, Winnipeg (Rick)...................................800-665-8089.........204-779-7796 ........19
Ontario
Brighton Machinery Sales Inc, Ingersoll (Brian)..............................519-485-7089.........519-485-7368.........11
CanAmera Machine Tools Inc., Cambridge (Marian)......................905-878-0888 ........................................13
DiPaolo Machine Tools Ltd., Mississauga (Nelson)........................905-676-9265.........905-676-9436 ..........3
Elliott Machinery Ltd, Oakville (Frank) ............................................905-829-2211 .........905-829-5600 ........18
Ferric Machinery Inc, Mississauga (Koen)......................................877-337-7424.........905-820-3234 ........20
Havlik Int’l Machinery, Cambridge (John) .......................................519-624-6240.........519-624-4119...........6
Infinity Assets Solutions, Concord (Leslie)......................................905-669-8893.........905-669-7512 ..........9
Machine Solutions Inc., Guelph (Andrew).......................................416-220-5910 ..........................................2
Park Thermal International, Georgetown (Sales) ...........................905-877-5254.........905-877-6205.........11
Powermaster Machinery Ltd, Mississauga (Peter) .........................905-624-9327.........905-624-8591 ..........8
S K Braly Machinery Inc, Mississauga (Steve) ...............................905-793-8080.........905-793-2190 ........12
TOS America Inc., Milton (Lee).......................................................905-876-0890.........905-876-1959 ..........1
Trader Machinery Inc, Concord (Jonathan) ....................................905-669-7507.........905-669-7512 ..........4
Walker Machinery Ltd., Milton (Chris) .............................................905-876-0890.........905-876-1959 ........15
Quebec
Machinerie Gilles Lupien, Drummondville (Gilles) ..........................819-478-5266.........819-478-5266.........11
Machinery S. Tremblay, Drummondville (Sylvain) ..........................819-477-6677.........819-477-6466 ........17
USA
Jordan Craig Machinery Int’l Inc, New City (Jordan) ......................845-398-0073.........845-398-0074 ..........7
COMPANY PHONE FAX PAGE
ADVERTISERS DIRECTORY
Page 14 Clue March, 2016
Page 15
9"x 49" EXCELLO, 602, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
10"x 50" RACER, , 40 Taper, 5HP, DRO, (Powermaster
Machinery Ltd Tel: 905-624-9327, Fax: 905-624-8591)
See Page 8
10"x 50" TOPWELL, No.5VK, 2-Axis Anilam DRO, Power
Drawbar, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
M2833 MILLS, VERTICAL, CNC
9"x 49" BRIDGEPORT, , Acu-Rite MillPower 3-Axis CNC, R8
Taper, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
10"x 50" SOUTHWESTERN INDUSTRIES, TRAK K3 (2002),
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
N5230 NOTCHING MACHINES
1/4" x 8.6"sq “NEW” FERRIC, , variable angle, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 20
9"x 9"x 1/8" STRIPPIT, , Hyd., (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
O7397 OVENS
New & Reconditioned , Powered by Electric, Gas, Oil, Propane,
(Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
P2135 PLASMA CUTTING MACHINES
100 Amp MESSER MG, (2000), 6’x 10’, Hy-Definition, CNC
plasma, Metalmaster II, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
P6100 PRESSES, OBI
40 Ton BROWN BOGGS, , Air Assist Clutch, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
60 Ton BLISS, C-60, 4"stk, A/C, (Brighton Machinery Sales Inc
Tel: 519-485-7089, Fax: 519-485-7368)
75 Ton TOLEDO, , Air Clutch & Brake, 5"stroke, (Brighton
Machinery Sales Inc Tel: 519-485-7089, Fax: 519-485-7368)
80 Ton BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x
36"bed, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
100 Ton CKD HRONOV, , TYP: LEND 100, A/C, Variable
Stroke Length, Command stamp ctls, (Brighton Machinery
Sales Inc Tel: 519-485-7089, Fax: 519-485-7368)
110 Ton NIAGARA, Model: A 5 1/2, 6" Stroke, Mech. Clutch
w/air assist, (Brighton Machinery Sales Inc
Tel: 519-485-7089, Fax: 519-485-7368)
P9050 PUNCHES, LOAD/UNLOAD
AMADA, MP1225NJ (1998), Automatic Load/Unloader, Ref#
10345, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
P9150 PUNCHES, SINGLE STATION
60 Ton FABMASTER, (2011), Like new, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
P9275 PUNCHES, TURRET
16.5 Ton WIEDEMANN, Centrum 1000Q, w/Tooling, Fanuc OP,
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
19 Ton TRUMPF, Trupunch 1000 (2007), Only 3109hrs, Ref#
9812, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
20 Ton TRUMPF, Trumatic TC3000L (2007), 2KW Truzx 2000,
Ref# 9851, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
22 Ton WIEDEMANN, 2044 (2001), 30 Sta, 2 A/I, 114 Style,
Ref# 10304, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
22 Ton AMADA, Apelio III 2510VL, Fanuc 160IL, 2KW Laser,
New 2003, Ref# 10372, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
22 Ton AMADA, EM2510NT (2006), AMNC NT CNC,
MP1225NJ, PR300III, Ref# 10401, (Jordan Craig Machinery
Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
22 Ton AMADA, Vipros 255 (1997), Fanuc 18P, 31 Sta., 3A/I,
Ball Table, Ref# 9801, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
22 Ton STRIPPIT, V20 (2011), 1525 Fanuc 180I, 60"x 80", 34
Station, 4 A/I, Ref# 10413, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
M2824 MILLS, VERTICAL P9275 PUNCHES, TURRET
PAGE 22 CLUE, February, 2016
OvensFor Powder Coating, Aging,
Stress Relief, Normalizing
Gas or Electric
Numerous Sizes Available
Call: 905-702-4644
7055 Auburn Rd., Milton, ON L9T 7V9Ph: (905) 876-0890 Fax: (905) 876-1959
Email: [email protected] : www.walkermachinery.com
FEELER FTC-10CNC lathe
BORING MILLS, CNC, HORZ, FLOORUNION BFP 130 CNC, 5.12", (1994) 120"x 275", Heidenhain ctrlBORING MILLS, HORZ, TABLE4” TOS W100A, 44”x63”x63” trvls, 50 tpr, 4-axis DRO, new paint!, 19814” TOS W100A, 44”x63”x63” trvls, 50tpr, 4-axis DRO, new paint!, 19864“ TOS W100A, (2014) Remanufactured, 50 tpr spindle factory rebuilt to new tolerance, 5-axis Heidenhain DRO4” UNION CNC point to point, 44”x40”x63” trvls, TNC 135 Heidenhain control, very nice condition!4“ TOS W100A, 44"x 63"x 63" trvls, 4-axis DRO 49"x 49" rotary table, new 19964.3” TIGERCUT 110 CNC, 63"x 86" travels, Fagor CNC 1 degree index table, new 2005BORING MILLS, VERT72” G&L, CNC, 12 ATC, live tools, Refurbished 2009 Fanuc 21i ctlDRILLS, RADIALMAS VR 8A x 2500, 3" capLATHES, ENGINEChein Yeh, 20”x60”, 4-way toolpost, steady & follow rest, 3.25” bore, new paint!VDF 25”x120”, quick change toolpost, steadies, follow rest, 3 & 4 jaw chuck, excellent!TOS SN 63C, 25”x157”, 4-way toolpost, steadies, new 1998TACCHI, 50"x 315", (1973) Steadies, follow rest, 4-jaw chuckPOREBA TCG 160, 63"x 393", As New!NILES, 70"x 315", 3-bedway design, pendant control on carriage heavy dutyLATHES, N/C & CNCMORI SEIKI SL-6 CNC, 50hp motor, Fanuc 6T control, 15"chk new 1981
Feeler FTC 10 CNC, yr 1998, Fanuc control, 6” chk, chip conveyor, 8 sta. turretMACHINING CTRS, HORZNIIGATA HN 80 FC, 32"x 32" pallets, Fanuc 11m control, 6 pallet pool built in facing head and in/out spindle movement for boring mill applications, 120 ATC, new 1992MILLS, UNIVERSALTOS FGS 63T plus, 25"x 71", (2002) 3-Axis DRO, Variable speeds/feeds pendant ctl, 50 tpr, unv headZAYER 66MB, 28"x 80", 3-Axis DRO, Unv head, pendant ctl variable speeds/feedsMISCELLANEOUS50 plastic automotive skids, 45"x48" pallet - 4 way pick upCast Iron Floor Plates, 157" x 74" x 16" 2 AvailablePortable Drilling Unit, CLIMAX KM 3000Rotary Table, TOS ISO 16, 86"x 86", 60" Travel, 17 Ton, Rotary & Linear DRO
20Years
Clue March, 2016 Page 15
Page 16
CLUE, May 2010 PAGE 21
P9275 PUNCHES, TURRET R4704 ROLLS, ANGLE BENDING
22 Ton TRUMPF, TC2020R Bosch (2010), 50"x 100", Approx.
2,800 hrs, Ref# 10411, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
22 Ton STRIPPIT, V20 1525 (2011), Fanuc 180I, 60"x 80", 34
Station, 4A/I, Ref# 10413, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
23 Ton STRIPPIT, Global 20 (2003), Fanuc 180I, 4A/I, Thick
Style, Ref# 10423, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
25 Ton TRUMPF, TC6000L 1600 (2010), Laser/Punch,
Sheetmaster, Ref# 10191, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
25 Ton TRUMPF, TC5000R-1600 (2005), New linear amplifier,
14,039hrs, Ref# 10159, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
27.5 Ton TRUMPF, TC500R Bosch CNC (1993), 18 Station
Rotation, Ref# 10349, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
27.5 Ton TRUMPF, TC600L, Siemans 840D, Ref# 10378,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
33 Ton AMADA, Vipros 358 King II, 58 Stn, Fanuc 18P, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
33 Ton AMADA, Vipros 358 KingII (1999), Fanuc 18P, 4 A/I
MP1225NJ Load/Unload, Ref# 10383, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
33 Ton AMADA, Pega 357 (1994), Fanuc O4PC, 58 Sta, 2 A/I,
Ref# 10382, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton YAWEI-NISSHINMBO, HPQ-3048 (2012), Siemens
Control, Thick style tooling, Ref# 10326, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
33 Ton AMADA, ApelioIII 357V (2003), Fanuc 16L, 2000 Watt,
Ref# 10290, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, ApelioIII 357V (1999), Fanuc 16L, 2000 Watt,
Ref# 10358, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, EMK3610NT AMNC-F (2007), 60"x 100", Ref#
10361, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
33 Ton AMADA, Vipros 368 King II (1998), Fanuc 18P CNC
control, Ref# 10363, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, Vipros 357 Queen (1998), Fanuc O4PC &
PHNC, 58 Sta, 2 A/I, Ref# 10179, (Jordan Craig Machinery
Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, Vipros 358 KingII (1999), Fanuc 18P, 4A/I,
Ref# 10250, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, Vipros 3610L (2000), L-Shear, 6 Shelf Loader,
Unload Conveyor, Ref# 10269, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, EMK 3610NT (2007), (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
33 Ton AMADA, Vipros 358 King (1998), Fanuc O4PC, 4 A/I,
Ref# 10407, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton STRIPPIT, FC1250MH (1992), Fanuc OPB,
Load/Unload, Thick Style 4A/I, Ref# 10420, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
33 Ton AMADA, Vipros 358 King (1998), Fanuc O4PC, 4A/I,
Ref# 10407, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, Pega 357 (2000), Fanuc O4PC, 58 Sta, 2A/I,
Ref# 10430, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, Pega 345K (1993), Fanuc O4PC, 58 Sta, 2A/I,
Ref# 10421, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, Pega 367 (1987), Fanuc O4PC, 60"x 72", 58
Sta, 2A/I, Ref# 10433, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
50 Ton WIEDEMANN, Vectrum 5000, 72"x 60", 60" Throat, 54
Stn, tooling, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
R4704 ROLLS, ANGLE BENDING
2"x 2"x 3/16" “NEW” (Demo) TAURING, SAF DS 50HV,
Hydraulic, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
2"x 2"x 1/4" “NEW” FERRIC, APK50, Mod. Rolls, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 20
2.2"x 2.2"x 1/4" TAURING, SAF DS 60 HV, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
2-3/8" x 2-3/8" x 1/4" “NEW” FERRIC, APK61, Mod. Rolls,
DRO, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 20
MODERN TOOL BC LTD.
New & Used Equipment, Machinery Sales | Toll-Free: 1-800-717-1440
Modern Tool BC LTD. offers an extensive line-up of new and used machine tools, fabricating, sheet metal, and production machinery.
1385 Kingsway Avenue, Port Coquitlam, BC V3C 1S2 | (604) 472-1444 | Toll Free: 1-800-717-1440
DURMA AD-R37175 CNC Hydraulic Press Brake
HYD-MECH S-20A IIIAutomatic Band-Saw
Need your equipment serviced? Our service department is available from Monday to Friday 9am to 5pm
On the web @ www.moderntoolbc.comFollow us on Twitter @ModernToolBC
Service & Parts Sales | Toll-Free: 1-800-717-1440
SCOTCHMAN 6509-24MHydraulic Ironworker
DURMA PBH-180Profile Bending Machine
Page 16 Clue March, 2016
Page 17
3-1/4"x 3-1/4"x 3/8" “NEW” FERRIC, APK81, Mod. Rolls, DRO,
Hyd. Side guides, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 20
4"x 4"x 3/8" “NEW” FERRIC, APK101, Mod Rolls, DRO, Hyd.
Side guides, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 20
6"x 6"x 1/2" PULLMAX, Z43, Hydraulic, Pendant Control, Digital
Readout, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
R5603 ROLLS, PLATE BENDING
1"x 10’ PULLMAX, PV7H, Hyd., 3-Roll Double Pinch, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
3/16"x 4’ “NEW” FERRIC, , ASM plate roll, DRO, mot. Bending
roll, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 20
3/16"x 5’ “NEW” FERRIC, , ASM plate roll, DRO, mot. Bending
roll, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 20
3/16"x 6.5’ “NEW” FERRIC, , ASM plate roll, DRO, mot.
Bending roll, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 20
5/16"x 8’ “NEW” FERRIC, , AHS 256 plate roll, 4 roll machine,
hardened rolls cone rolling, DRO, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 20
1-3/4"x 6.5’ AHK 2035, plate roll, 3 roll machine, hardened rolls,
cone rolling, DRO, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 20
S0653 SAWS, BAND, HORIZONTAL
9"x 16" DOALL, , Semi-Auto, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
S0690 SAWS, BAND, VERTICAL
24" STARTRITE, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
9"x 16" DOALL, C916, Horizontal, Semi-Automatic, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
10"x 13" BAXTER, No.115B, Roll-In-Saw, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
12"x 14" RAM, , Vertical Roll-In Saw, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
S0805 SAWS, COLD & FRICTION
SOCO, MC350A (2001), (Machine Solutions Inc.
Tel: 416-220-5910 See Page 2
S0948 SAWS, MISCELLANEOUS
4"x 10" ELUMATEC, , Fully Automatic Circular Saw,
(Machinerie Gilles Lupien Tel: 819-478-5266,
Fax: 819-478-5266)
S4105 SHEARS, POWER SQUARING
10ga x 4’ ALLSTEEL, , Hyd, FOPBG, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
1/4"x 10’ PEARSON, , Hydraulic, (Machine Solutions Inc.
Tel: 416-220-5910 See Page 2
1/4"x 10’ JELSINGRAD, HSL306, Mot. Backgauge (used),
(Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 20
1/4"x 10’ “NEW” FERRIC, HGD 3100 x 6, Mot. CNC back
gauge, Auto gap, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 20
1/4"x 10’ HACO, (2007), CNC with 39" back gauge, $19,500,
(Machine Solutions Inc. Tel: 416-220-5910 See Page 2
1/4"x 10’ CINCINNATI, 1810G (1996), CNC Front/Rear, Ref#
10393, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
1/4"x 12’ WYSONG, , Mechanical, CNC gauging, (Machine
Solutions Inc. Tel: 416-220-5910 See Page 2
1/2" x 10’ “NEW” FERRIC, HGD 3100 x 13, Mot. CNC back
gauge, Auto gap, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 20
1/2"x 12’ ALLSTEEL, , Motorized BG adjustable rake and gap,
(Machine Solutions Inc. Tel: 416-220-5910 See Page 2
1/4"-1" x 8’-20’ “NEW” TOSKAR, , Hydraulic, (Machine
Solutions Inc. Tel: 416-220-5910 See Page 2
W3054 WELDERS, SPOT
20 KVA SIP, , (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
Z9000 MISCELLANEOUS
Transformers 5 KVA to 1000 KVA, Large Assortment of used,
(Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
Pallet Trucks, (Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
Assorted Fans, (Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
Barfeeds LNS, Servo S3, (2007 & 2013) w/Remote pendant,
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
R4704 ROLLS, ANGLE BENDING Z9000 MISCELLANEOUS
PAGE 22 CLUE, February, 2016
SYLVAIN TREMBLAY MACHINERY
Milling, EAST-LION, with C-TEC Ctrl, 12”x 60”, CNC 3 AXIS, $9,500
TARNOW Lathe, TUJ50MX2000,1995, Fully Equipped, DRO
LEPONT Lathe (Italy), 40” x 16’,4.5” Spindle Bore, DRO
KONE 15TM (2 x 7.5TM) x 36', 25’ Lift,
Mint Condition
2 x 7.5 TM hoist KONE
CLEARANCE SALE, MUST BE SOLD
MABO, NEW DELTA,20” Stroke Sander
Roto-Die 10', model 10,mint condition
Universal milling GAMBIN, 3M,15” x 60”, 40 Taper
Contact: Sylvain Tremblay • Cell: (819) 314-4967 • [email protected]
ALL MACHINES
REVISED DOWN
PEMSERTER PS-5006 Tons capacity, 12” Throat
Clue March, 2016 Page 17
Page 18
PRE-OWNED MATSUURA V.PLUS-1000 VERTICAL MACHINING CENTER
YCM TCV3000A-5AF 5 AXES (3+2)
HIGH PERFORMANCE TRAVELING COLUMN VERTICAL MACHINING CENTER
SPINDLE: 12,000 RPM (20/25/29.5 HP) X-AXIS TRAVEL: 3,000mm (118.1”) Y-AXIS TRAVEL: 800mm (31.5”) Z-AXIS TRAVEL: 800mm (31.5”) TABLE SIZE: 3,500 X 800mm (137.8” x 31.5”) B-AXIS (HEAD): +/- 110 degrees C-AXIS (TABLE): 360,000 (0.001 degrees) ATC: 40 POSITIONS
ACCESSORIES: CHIP CONVEYOR 300 PSI COOLANT THROUGH SPINDLE DATA SERVER WITH ETHERNET (4GB) PROBES: RENISHAW NC-4 & RMP-40
PRE-OWNED 2013 MODEL COMMISSIONED IN 2014 WITH ONLY 250 CUTTING HOURS!!
Elliott-Matsuura Canada Inc. 2120 Buckingham Road, Oakville, ON, L6H 5X2
Tel: 905.829.2211 Fax: 905.829.5600 E-mail: [email protected]
Web: www.elliottmachinery.com
VANCOUVER * CALGARY * EDMONTON * WINNIPEG * TORONTO * MONTREAL * QUEBEC
CALL ELLIOTT DIRECT AT 905.829.2211 SPEAK WITH FRANK HAYDAR, FRANK BOLIEIRO, VINCE D’ALESSIO, OR TIM FRANKLIN
PRE-OWNED NAKAMURA WT250IIS MULTI SPINDLES / MULTI TURRETS
12,000 RPM / 30 HP / 40 ATC / TURBO MICROHINGE 500 CHIP CONVEYOR / TSUDAKOMA RZ-160 INDEXER /
FANUC SOFTWARE PACKAGE / HANDYMAN
L&R SPINDLES: 65mm BAR CAPACITY / FIVE AXIS / PARTS CATCHER A / TOOL SETTER / REAR DISCHARGE CONVEYOR / HAINBUCH SPANNTOP COLLET CHUCKS
Page 18 Clue March, 2016
Page 19
Clue March, 2016 Page 19
Page 20
M A C H I N E R Y
899 Danforth PlaceBurlington, ON L7T 1S1Phone: 905-528-7765
Fax: 905-917-0222
Page 20 Clue March, 2016
FIBER LASER
Ontario and Eastern Canada:Showroom & Training Centre10 Natura Way, Cambridge, ON N3C 0G7
Western Canada:Westside Service Ltd.122 Broxburn Blvd.Lethbridge, AB T1J 4P4
toll-free # 1-877-337-7424 | [email protected]
www.ferricmachinery.com
Your One Stop Machine Shop
Contact us today for free admission to Fabtech 2016 in Toronto
We're looking forward to seeing you there from March 22 to 24 in Toronto or visit our
new showroom any time.
PROFILE ROLLS
PRESS BRAKES
PUNCH PRESS
PLASMA MACHINE
SHEARS
FLEXIBLE COIL PUNCHING LINES
PLATE ROLLS
16APRIL_Ferric_LaserV4.indd 1 2016-01-27 1:30 PM
Quality . Service . Value
Booth 705