13 ADVANTAGES WHAT IT’S FOR HOW TO USE IT FILANO RUST RUST STAIN REMOVER MARBLE GRANITE NATURAL STONE AGGLOMERATES PORCELAIN TILES NATURAL STONE TERRACOTTA CONCRETE No dilution required: Ready to use Application: 1. Completely cover the stain with the product. 2. Leave to act for about 15 minutes. 3. The product's colour will change to deep purple as it reacts with the rust. 4. Once the indicated time has elapsed, remove the residue and rinse the surface thoroughly with clean water, then leave to dry. 5. Repeat the application if necessary. Gel-like consistency: it acts directly on the stain you want to remove, thus optimising its effect and avoiding wastage. Acts in just a few minutes: it removes stains in just 15 minutes. Removes surface rust stains. Thanks to its non-acidic formulation, it is particularly suited for delicate applications like polished marble. Packaging 75 ml bottles in boxes of 12. WARNINGS • Keep out of reach of children. • Do not disperse into the environment after use. TEMPERATURES Storage temperature: from 5° to 30° C. The product should be applied to materials with temperature between 5° and 30°C. CONTAINS less than 5 % phosphates. LABELLING Signal words: Danger Hazard indication: Causes serious eye irritation. Causes skin irritation. Caution recommendations: If medical advice is needed, have product container or label at hand. Keep out of reach of children. Wash hands thoroughly after handling. Wear protective gloves / eye protection / face protection.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice / attention. TECHNICAL FEATURES Appearance: viscous liquid Colour: transparent Odour: characteristic pH: 7,6 Flash point: > 60°C This information is the result of our most up- to-date technical know-how and is based on ongoing laboratory research and testing. Nevertheless, for reasons beyond our control, any suggestions always require appropriate analysis, testing and monitoring. Fila shall not accept any responsibility for improper use of its products. ADVANTAGES WHAT IT’S FOR HOW TO USE IT REV. 01 - 23/05/2018 Caution: if the affected surface was treated with wax, the coating may need renewal. Note: the product has a characteristic aroma. FILAPHZERO (dil. 10%) FILAPS87 pH 0,8 FILACLEANER (dil. 10%) pH 7 pH 12,7 FILANO RUST pH 7,5