MAPPS IV with ESPRIT Equipping machine tools for greater productivity Powered by: Full-Spectrum 2-5 axis Programming Programming that fully supports your machines’ capabilities, from 2-axis turning to 5-axis milling Including Factory Certified Post Processors Post processors that are built and tested at the factory by Mori Seiki • NT, NZ, NH, NMV and more … Directly Reads your CAD Data Reads the following native CAD data files: • Parasolid, ACIS, DXF, DWG, IGES, VDA • Solid Edge, SolidWorks, Inventor • Catia*, Pro/Engineer*, Unigraphics* (*available as an option) Comprehensive Simulation and Collision Detection Dry runs rendered in dynamic solids with the complete machine environment: fixtures, cutting tools and workpiece Optimized Mori Seiki Cutting Conditions Knowledge base that dramatically simplifies the part programming process • Speeds and Feeds, Cutting Tools, Machining Processes Networked Offline PC Programming Run the machine’s programming system offline Significant Cost Savings No need to purchase or configure a stand-alone CAM system Backed by Professional-Grade Technical Support Includes two years of Mori Seiki factory support The ESPRIT CAM system is a standard feature of the New MAPPS IV Control
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
MAPPS IV with ESPRIT Equipping machine tools for greater productivity
Powered by:
Full-Spectrum 2-5 axis Programming Programming that fully supports your machines’ capabilities, from 2-axis
turning to 5-axis milling
Including Factory Certified Post Processors Post processors that are built and tested at the
factory by Mori Seiki • NT, NZ, NH, NMV and more …
Directly Reads your CAD Data Reads the following native CAD data
files: • Parasolid,ACIS,DXF,DWG,IGES,VDA • SolidEdge,SolidWorks,Inventor • Catia*,Pro/Engineer*,Unigraphics* (*available as an option)
Comprehensive Simulation and Collision Detection Dry runs rendered in dynamic solids with the complete machine
environment: fixtures, cutting tools and workpiece
Optimized Mori Seiki Cutting Conditions Knowledge base that dramatically simplifies the part programming process • SpeedsandFeeds,CuttingTools,MachiningProcesses
Networked Offline PC Programming Run the machine’s programming system offline
Significant Cost Savings No need to purchase or configure a stand-alone CAM system
Backed by Professional-Grade Technical Support IncludestwoyearsofMoriSeikifactorysupport
The ESPRIT CAM system is a standard feature of the New MAPPS IV Control
ESPRIT for 2 – 5 Axis MillingESPRIT is easy to use for quick jobs, yet packed with power to handle the most complex production milling work. Whether you are programming 2 ½-axis parts or 5-axis machining, ESPRIT will give you the programming power you need and the ease-of-use you are looking for.
ESPRIT for 2 – 22 AxisTurningWhether you are looking for a CAM system to automate your traditional turning – from roughing and grooving to threading and finishing – for faster, more accurate results, or to maximize your multi-axis or Swiss-turn machine tool investment, ESPRIT is the right CAM choice.
ESPRIT for Wire EDMWhether you use your wire EDM machine for small lots, sub-micron precision parts, or as a workhorse for production machining, get the most out of your machine tool investment. Dramatically simplify the part-programming process, significantly increase part accuracy and greatly reduce the length and complexity of your G-code program with ESPRIT.
ESPRIT for MultitaskingMill-Turn MachiningMill-turn machines represent an enormous potential for profitability, but possess inherent programming challenges due to their complexity. ESPRIT is the right CAM system to perform as the key factor for success in the mill-turn equation. It’s a critical choice that determines the ultimate productivity of your machine investment.
ESPRIT for high-speed3- and 5-Axis machiningESPRIT is an automated, robust and easy-to-use high-speed 3-axis and 5-axis CAM system. Utilizing knowledge of in-process stock, remaining material and integrated simulation and verification, ESPRIT delivers fast, safe and reliable programming for a wide variety of 3D machining applications.
for ALL of your programming needs
Post Processors are available for virtually any CNC machine tool make or model.
As versatile as it is powerful, ESPRIT CAM is also available as a stand-alone program that will reliably drive any type of machine.
ESPRIT: The Right Choice
ESPRIT delivers powerful, high-performance, full-spectrum CNC programming for any machine tool.