Mapping Earths Surface
Mapping Earths Surface
A field is any region or space in the environment that is
measurable.
Atmospheric pressure, wind speed, elevation, levels of infra-red
radiation are all examples of fields.
Maps are used by Earth scientists to interpret how a field is
impacted by its environment or vice versa.IsolinesIsolines are used
on a map to connect points of equal value.
This isoline indicates an elevation of 3000 feet.Common examples
of isolines include:
ISOTHERMS = lines of equal temperatureISOBARS = lines of equal
air pressureCONTOUR LINES = lines of equal elevationContour
linesGradient: Changes in Fieldsgradient = change in (amount of)
field value change in distance (horizontal distance)An environment
is continually changing and therefore fields will also change.
Gradient represents the rate of change from place to place within
the field.
City A = 42FCity B = 30FWhat is the temperature gradient between
two cities in North Carolina on the date shown?Gradient = change in
(amount of) field value change in distance (horizontal
distance)Gradient = 42F 30F 100 milesGradient = 12F = 0.12 F/mi100
milesRT = Pg. 1Contour MapsA contour map (topographic map) is a
model used to show the elevation field of the Earths surface at a
particular location.
Contour maps are used as hiking aids, planning for areas of
construction and resource development.
Brown = landforms/elevation Blue = Water features Green =
woodlands Red/Black = Human constructs (boundaries, roads,
etc..)
Reading a Contour MapWhen contour lines cross a stream they bend
towards the direction of higher elevation.An index contour appears
thicker/bolder than the other contour lines.A series of
consecutively smaller and smaller contour lines indicates a peak in
elevation.Closely spaced contour lines indicate a steep slope
(gradient).Contour lines that are spaced wide apart indicate a
gentle slope (gradient).Reading a Contour Map
A depression represents a decrease in elevation. Sink holes and
craters represent landscape features that are depressions.
A depression is represented by hachures on the contour lines.
The first depression contour line will have the same contour
interval as the last contour line.
Each succeeding depression contour line will be drawn at the
same contour interval as the rest of the map.This first depression
contour line would have an elevation of 140 ft; the same as the
previous contour line.The second depression contour line would have
an elevation of 130 ft.The contour interval represents the change
in elevation between two consecutive contour lines on a map.The
contour interval for this map is 10 ft.
Determining Horizontal Distance on a Contour MapThe horizontal
distance on a contour map is usually represented as a map scale in
the legend of the contour map.To determine the horizontal distance
between two locations on a contour map:
Place a piece of paper with a straight edge on the map and mark
the two locations
Match up the marks on the map scale to estimate the horizontal
distance between the two points.What is the distance between the
school and post office?2.3 km
Topographic ProfileA topographic profile is a cross section of a
landscape constructed from data collected from a contour map. To
make a topographic profile, complete the following steps:
Place the edge of a strip of paper along the line to be
profiled.
Make a mark on the paper at each point where a contour line
crosses it. Record the elevation at each point.
Align the paper along the x-axis of a graph and plot the points
of elevation onto the graph.
Connect the points with a smooth, curved line.Map Direction
Compass RoseMaps are usually constructed so that geographic
North is at the top of the map.
An arrow or a compass rose is most usually placed on the map to
show the direction of geographic North.
Knowing where North is on a map, allows the observer to
determine the other 7 cardinal directions
Where can Bluewater Lake be found with relation to Kennedy
Lake?Southeast