Day Thursday 25 October 2012 Two 08:45 - Opening Comment 09:00 09:00 - Session 5: RTM 09:50 Advances in RTM technology for efficient G. Adler manufacturing of complex parts Xenom Ltd. Robot based automated preforming component M. Christ FIBRE 09:55 - Coffee Break 10:35 10:35 - Session 6: Part Production 12:15 Analysis, design and experimental validation of a P. Roglev simplified composite structure for a box wing and a Technical University method for its production Sofia Industrialization of new thermoplastic composite M. Koetsier applications in the aerospace Fokker Aerostructures B.V. Resin Transfer Moulding of an engine thrust frame A. Brödsjö cone cap Airborne Technology Centre, Den Haag Thermoplastic press formed composite window frame S. Sterk NLR 12:15 - Lunch 13:05 13:05 - Session 7: Design 14:20 Assessing warpage in composites manufacturing in M. Hartmann search of a simple solution to a complex problem TU Munich Design for manufacturing of grid stiffened fuselage M. Nawijn panels NLR Damage tolerance of non-conventional laminates C. Lopes with dispersed stacking sequences IMDEA, Madrid 14:20 - Coffee Break 15:05 15:05 - Session 8: Jointing 15:30 Textile-reinforced co-bonding for structural repair P. Abel for Improved Performance ITA RWTH Aachen Ultrasonic welding of lightweight structures and J. Born hybrid structures CTC GmbH 16:00 End of ISCM 2012 Day Wednesday 24 October 2012 One 08:00 Registration and coffee 08:30 ISCM Organization Committee M. Wiedemann 08:35 Opening address DLR 08.50 Opening Session 09:40 - Session 1: Simulation 10:55 Combining simulations and all-around process A. Koorevaar monitoring for optimised composites manufacturing Polyworx B.V. Specifying, quantifying and optimizing composites J. Klintworth manufacture 3DS Catia Self-optimization with machine vision - Closing the Schmitt control loop on machine level WZL RWTH Aachen 10:55 - Coffee Break 11:30 11:30 - Session 2: Natural Laminar Flow (NLF) Upper Wing Skin Concept 12:20 A Tooling and Production Strategy for a Fully Integral, M. Grote High Production Rate NLF Upper Wing Skin DLR Prediction of manufacturing-induced distortions of an E. Kappel integral stiffened panel using a novel semi-numerical DLR approach 12:20 - Lunch 13:20 13:20 - Session 3a: Processes 14:45 Reliable machining of CFRP components with W. Hintze industrial robots Fraunhofer IFAM Automation of post-machining and repair of C. Bremer composite structures BCT GmbH Strand laying process, a modern automated technology D. Büchle for high loaded products - applications and potentials BaltiCo GmbH 14:35 - Coffee Break 14:55 14:55 - Session 3b: Processes 15:10 Automatic handling of carbon material for serial H. Apmann production Premium Aerotec GmbH An approach for a meso-scale transparent Tow- F. Engel Placement-Process by Inline-In-Situ-Measurement EADS IW 15:45 - Coffee Break 16:15 16.15 - Session 4: Curing 16:40 Out-of-autoclave prepreg research for large scale P. Hubert aerospace applications McGill University Reliable cure monitoring and control in the advanced N. Pantelelis composites manufacturing National Technical University of Athens 17:05 Lab-Tour DLR Stade/Coffee break 18:05 Closing speach and remarks for Conference Dinner 19:30 - Conference Dinner in Königsmarksaal Stade 23:00 The International Symposium on Composites Manufacturing (ISCM) aims to present and discuss recent developments in composites manufacturing for aerospace and related applications. ISCM aims to be a platform for exchange of ideas between experts in their field. Presentations involve analysis of emerg- ing issues in composites manufacturing, the state of the art and discussion on the devel- opments that will shape the near future of composites development. Over the years, ISCM proved an event with much technological discussion and exchange of ideas. To continue this tradition, presenta- tions with focus on current developments in composites manufacturing technology and emerging issues are invited. ISCM 2012 will be held on 24 - 25 October 2012 at the Center for Lightweight- Production-Technology of German Aerospace Center DLR in Stade, Germany. ISCM is a biennial event organised by the Dutch National Aerospace Laboratory NLR and the German Aerospace Center DLR who act as alternate hosts. Programme 6th International Symposium on Manufacturing Technology for Composite Aircraft Structures 24 - 25 October 2012 For more information, please consult www.iscm.eu.