This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Type 517 Diaphragm Valve PROGEF Stan-dard PPANSI FlangedModel:• Handwheel with built-in locking mechanism• Overall length EN 558• Connecting dimension: ANSI/ASME B 16.5 class 150, ASTM
D 4024, BS 1560, BS EN 1759• Joining faces flat/serrated• Double flow rate compared to predecessor• One housing nut replaces four screws• Material: PP-HOption:• Self adjusting multifunctional module with integrated limit
Type 546 Ball Valve PROGEF StandardWith mounting insertsWith fusion sockets metricOption:• Multifunctional module with integrated limit switches• Pneumatic or electric actuators from GFModel:• For easy installation and removal• Ball seals PTFE• Integrated stainless steel mounting inserts• Material: PP-H• z-dimension, valve end and union nut are not compatible
with Type 346 (DN10/15-50) and Type 370 (DN65-100)
Type 546 Ball Valve PROGEF StandardWith mounting insertsWith fusion sockets metricOption:• Multifunctional module with integrated limit switches• Pneumatic or electric actuators from GFModel:• For easy installation and removal• Ball seals PTFE• Integrated stainless steel mounting inserts• Material: PP-H• z-dimension, valve end and union nut are not compatible
with Type 346 (DN10/15-50) and Type 370 (DN65-100)
Type 543 3-Way Ball ValveHorizontal/L-port PROGEF StandardWith fusion sockets metricModel:• For easy installation and removal (valve end and union nut
are compatible with type 546)• Turn limiter 90° enclosed, in different positions usable as a
clip-on ring• Integrated stainless steel mounting inserts• Angle of operation 360° without turn limiter• Ball seals PTFE• Pneumatic or electric actuator available separately• Material: PP-H
Type 543 3-Way Ball ValveHorizontal/L-port PROGEF StandardWith butt fusion spigots IR-PlusSDR11 metricModel:• For easy installation and removal (valve end and union nut
are compatible with type 546)• Integrated stainless steel mounting inserts• Pneumatic or electric actuator available separately• Angle of operation 360° without turn limiter• Turn limiter 90° enclosed, in different positions usable as a
Type 543 3-Way Ball ValveHorizontal/L-port PROGEF StandardWith butt fusion spigots IR-PlusSDR11 metricModel:• For easy installation and removal (valve end and union nut
are compatible with type 546)• Integrated stainless steel mounting inserts• Pneumatic or electric actuator available separately• Angle of operation 360° without turn limiter• Turn limiter 90° enclosed, in different positions usable as a
Type 543 3-Way Ball ValveHorizontal/L-port PROGEF StandardWith threaded sockets NPT reinforcedModel:• Material: PP-H• For easy installation and removal (valve end and union nut
are compatible with type 546)• Ball seals PTFE• Pneumatic or electric actuator available separately• Angle of operation 360° without turn limiter• Turn limiter 90° enclosed, in different positions usable as a
Type 543 3-Way Ball ValveHorizontal/T-port PROGEF StandardWith fusion sockets metricModel:• Material: PP-H• Angle of operation 360° without turn limiter• Turn limiter 90° enclosed, in different positions usable as a
clip-on ring• Integrated stainless steel mounting inserts• Pneumatic or electric actuator available separately• For easy installation and removal (valve end and union nut
Type 543 3-Way Ball ValveHorizontal/T-port PROGEF StandardWith fusion sockets metricModel:• Material: PP-H• Angle of operation 360° without turn limiter• Turn limiter 90° enclosed, in different positions usable as a
clip-on ring• Integrated stainless steel mounting inserts• Pneumatic or electric actuator available separately• For easy installation and removal (valve end and union nut
Type 543 3-Way Ball ValveHorizontal/T-port PROGEF StandardWith butt fusion spigots IR-PlusSDR11 metricModel:• Pneumatic or electric actuator available separately• Angle of operation 360° without turn limiter• Turn limiter 90° enclosed, in different positions usable as a
clip-on ring• Integrated stainless steel mounting inserts• Ball seals PTFE• Material: PP-H• For easy installation and removal (valve end and union nut
Type 543 3-Way Ball ValveHorizontal/T-port PROGEF StandardWith threaded sockets NPT reinforcedModel:• Ball seals PTFE• Pneumatic or electric actuator available separately• Angle of operation 360° without turn limiter• Turn limiter 90° enclosed, in different positions usable as a
clip-on ring• Integrated stainless steel mounting inserts• Material: PP-H• For easy installation and removal (valve end and union nut
Type 543 3-Way Ball ValveHorizontal/T-port PROGEF StandardWith threaded sockets NPT reinforcedModel:• Ball seals PTFE• Pneumatic or electric actuator available separately• Angle of operation 360° without turn limiter• Turn limiter 90° enclosed, in different positions usable as a
clip-on ring• Integrated stainless steel mounting inserts• Material: PP-H• For easy installation and removal (valve end and union nut
Check valve type 561 PROGEF StandardWith fusion sockets metricModel:• For vertical installation• Compact installation length, same as ball valve type 546• Z-length, end connectors and union nuts not compatible with type 360• Material: PP-H• Designed for easy installation and removal• Vibration free even at high flow velocity• Flow-optimized return cone, double guidedd[mm]
Check valve type 561 PROGEF StandardWith butt fusion spigots IR-PlusSDR11 metricModel:• Z-length, end connectors and union nuts not compatible with type 360• Designed for easy installation and removal• Flow-optimized return cone, double guided• For vertical installation• Compact installation length, same as ball valve type 546• Material: PP-H• Vibration free even at high flow velocityd[mm]
Check valve type 561 PROGEF StandardWith threaded sockets reinforced NPTModel:• Z-length, end connectors and union nuts not compatible with type 360• Material: PP-H• Designed for easy installation and removal• Vibration free even at high flow velocity• Flow-optimized return cone, double guided• For vertical installation• Compact installation length, same as ball valve type 546NPT[inch]
Check valve type 561 PROGEF StandardWith threaded sockets reinforced NPTModel:• Z-length, end connectors and union nuts not compatible with type 360• Material: PP-H• Designed for easy installation and removal• Vibration free even at high flow velocity• Flow-optimized return cone, double guided• For vertical installation• Compact installation length, same as ball valve type 546NPT[inch]
Check valve type 562 PROGEF StandardWith fusion sockets metricModel:• Compact installation length, same as ball valve type 546• Z-length, end connectors and union nuts not compatible with type 360• Spring loaded, spring made of stainless steel (1.4310)• Material: PP-H• Spring available in other materials, see spare parts• Designed for easy installation and removal• Vibration free even at high flow velocity• Flow-optimized return cone, double guided• For horizontal or vertical installation d[mm]
Check valve type 562 PROGEF StandardWith butt fusion spigots metricModel:• For horizontal or vertical installation • Z-length, end connectors and union nuts not compatible with type 360• Compact installation length, same as ball valve type 546• Spring loaded, spring made of stainless steel (1.4310)• Material: PP-H• Spring available in other materials, see spare parts• Designed for easy installation and removal• Vibration free even at high flow velocity• Flow-optimized return cone, double guidedd[mm]
Check valve type 562 PROGEF StandardWith threaded sockets reinforced NPTModel:• Material: PP-H• Spring loaded, spring made of stainless steel (1.4310)• Spring available in other materials, see spare parts• Designed for easy installation and removal• Vibration free even at high flow velocity• Flow-optimized return cone, double guided• For horizontal or vertical installation • Compact installation length, same as ball valve type 546• Z-length, end connectors and union nuts not compatible with type 360NPT[inch]
Check valve type 562 PROGEF StandardWith butt fusion spigots metricModel:• For horizontal or vertical installation • Z-length, end connectors and union nuts not compatible with type 360• Compact installation length, same as ball valve type 546• Spring loaded, spring made of stainless steel (1.4310)• Material: PP-H• Spring available in other materials, see spare parts• Designed for easy installation and removal• Vibration free even at high flow velocity• Flow-optimized return cone, double guidedd[mm]
Check valve type 562 PROGEF StandardWith threaded sockets reinforced NPTModel:• Material: PP-H• Spring loaded, spring made of stainless steel (1.4310)• Spring available in other materials, see spare parts• Designed for easy installation and removal• Vibration free even at high flow velocity• Flow-optimized return cone, double guided• For horizontal or vertical installation • Compact installation length, same as ball valve type 546• Z-length, end connectors and union nuts not compatible with type 360NPT[inch]
Type 591 PROGEF StandardVentilating and bleed valveWith fusion sockets metricModel:• Material: PP-H• With protection cap up to DN50 made from PP-GF, DN65-100 made from POM• Floater made of PP-H• Compact installation length• Designed for easy installation and removald[mm]
Type 591 PROGEF StandardVentilating and bleed valveWith socket fusion spigots metricModel:• Material: PP-H• With protection cap up to DN50 made from PP-GF, DN65-100 made from POM• Designed for easy installation and removal• Floater made of PP-H• Compact installation lengthd[mm]
Type 591 PROGEF StandardVentilating and bleed valveWith fusion sockets metricModel:• Material: PP-H• With protection cap up to DN50 made from PP-GF, DN65-100 made from POM• Floater made of PP-H• Compact installation length• Designed for easy installation and removald[mm]
Type 591 PROGEF StandardVentilating and bleed valveWith socket fusion spigots metricModel:• Material: PP-H• With protection cap up to DN50 made from PP-GF, DN65-100 made from POM• Designed for easy installation and removal• Floater made of PP-H• Compact installation lengthd[mm]
Type 595 PROGEF StandardVentilating valveWith socket fusion spigots metricModel:• Spring available in other materials, see spare parts• Designed for easy installation and removal• Compact installation length• Material: PP-H• With protection cap up to DN50 made from PP-GF, DN65-100 made from POM• Spring loaded, spring made of NIMONIC 90, HALAR coatedd[mm]
Type 568 Butterfly Valve PROGEF Stan-dardLever OperatorModel:• Connecting dimension ANSI/ASME B 16.5 Class 150• Outer body in GGG-40.3 epoxy-coated• Overall length according to EN 558, ISO 5752• Material: PP-H
Type 568 Butterfly Valve PROGEF Stan-dardLever OperatorModel:• Connecting dimension ANSI/ASME B 16.5 Class 150• Outer body in GGG-40.3 epoxy-coated• Overall length according to EN 558, ISO 5752• Material: PP-H
Type 568 Butterfly Valve PROGEF Stan-dardGear OperatorModel:• Material: PP-H• Connecting dimension ANSI/ASME B 16.5 Class 150• Overall length according to EN 558, ISO 5752• Outer body in GGG-40.3 epoxy-coated