Manual Durban English Web

7/25/2019 Manual Durban English Web

1/16

User Manual

One | Bay 1 | Bay 6 | Metro


2/16

Congratulations on purchasing a Durban folding bicycl

You will soon be ready to unfold and go but rst we have few tips and tricks to help you get started.

Your Durban bicycle is simple to fold and unfold and soonwill become your favorite way to get around town.

Included in this manual you will nd a lot of informationabout your bike, its components, some maintenance tips,and important safety instructions.

We hope you enjoy your new Durban as much as we enjoydesigning it!

The Durban Team


3/16

Durban Bikes

IntroductionImportant NoticesSuggested Height and WeightTraffic Safety

Bicycle Components

Maintenance and CleaningMaintenanceCleaningCorrosion

Riding your DurbanRiding During Low VisibilityRiding PositionUsing BrakesUsing GearsUsing Quick Releases and Latches

Bicycle Safety Checklist

Folding, Unfolding and AdjustmentsWarranty

3

4

5

6

7

9

1014


4/16

Durban Bikes

3

Here at Durban we believe bicycles are the future and wewant that future to be now. We started Durban to bring this

goal to every likeminded person in the world.

It is our dream to see people everywhere commuting onbicycles and we are here to support that revolution. With ourunique bicycles and accessories we want to inspire peoplelike you to use bicycles more often.Viva the bicycle revolution!

Lets stay friends online! Please visit our website amedia sites to stay up-to-date with the latest news

developments from Durban.

Websitewww.durbanbikes.com

Facebookwww.facebook.com/durbanbikesusaTwitterwww.twitter.com/durbanbikesusa

Instagramwww.pinterest.com/durbanbikesusa

Imported and Distributed in the United States by:

Durban Bikes USA LLC2041 Rosecrans, Suite 322El Segundo, CA 90245

E-mail: [email protected]: 1-855-42-BIKES


5/16

Introduction

Folding bicycles have special components thatare different from regular bicycles. Please readthis manual carefully before using your bicycle.

We promise, it wont be a waste of time.

Some models are packaged with the right pedaldetached. We recommend that the right pedal beinstalled along with the initial check of the bicycle.

Tip for Installing PedalsNote the shaft end of each pedal. On theshaft of each pedal will be the letter R

(right) or L (left), defining which side of the bicy-cle on which the pedal should be installed.To install the pedals, start by threading the pedalshaft into the pedal hole on the correspondingcrank arm using your hands.The right pedal will be on the same side as thechain. With a 15mm open-end wrench, tightenthe right pedal clockwise. Place the left pedal onthe other side and tighten in a counterclockwisedirection.

Suggested Height and WeightYou and your entire load must weigh less than 95kg (210 lb) on bicycles with 20 wheels or 100 kg(220 lb) on bicycles with 24 wheels.

If you are carrying extra weight or bags, makesure that the bicycle is stable.

Our bicycles are designed for riders from 48 to63 (1.40 to 1.90 meters) tall.

Traic SafetyThis manual is for reference only and

be considered a complete guide. Pleaer sources of safety and local traffic lriding your bicycle.

Always wear your helmet and striding.

Follow the flow of traffic and ridnated bicycle lanes.

Keep yourself visible to cars andyour bicycle in blind spots for dr

Make eye contact with drivers wsignal your intentions.

Watch for holes in the road or siface and other hazards such as odoors or children playing.

Some places require the use of lother accessories, while cycling hibited in some areas. Check locregulations and obey them whil

Do not use headphones or sungaffect your vision while riding yo

Do not ride your bicycle while un

influence of drugs or alcohol.

Our bicycles are designed for regular use o n paved

roads by adult riders (13 years old and above).

Jumps or stunts can damage the bicycle and put the

rider at risk of injury or death.

WARNING

Your bicycle comes fully assembled and folded in

the box. Nevertheless, it is essential that a profes-

sional bicycle mechanic check this product before

you use it.The mechanic should check and ensure that the

brakes, drive train, quick releases, bolts, pedals,

seat post, handle post, latches, wheels and all oth-

er components are properly installed and adjusted.

WARNING


6/16

5

1. Wheels

2. Rear Derailleur

3. Chain

4. Crank

5. Pedals

6. Seat post

7. Quick Release

8. Saddle

9. Frame

10. Frame Latch

11. Handle Post

12. Handle Post Lat

13. Handlebars

14. Brake Lever

15. Brakes

16. Headset17. Fork

Bicycle Components

2 3 4 5 1

11

12

15

16

17

6 7 10 9

8

13 14


7/16

Maintenance and Cleaning

MaintenanceDo not perform maintenance or adjustment of the

bicycle or components without sufficient knowl-edge or proper tools. Where necessary, take yourbicycle to a mechanic for repair or maintenance.

Bicycles are subject to wear and tear, as well ashigh stress. Materials and various componentsmay be affected differently. If the lifetime of acomponent is exceeded, it may suddenly fail.Any crack, scratch or discoloration may indicatethat a component needs to be replaced. If yousee signs of wear and tear, address them imme-diately.

Take your bicycle to a professional mechanicfor periodic maintenance. How frequently youtake your bicycle to a mechanic for maintenancedepends on how you use the bicycle, but we rec-ommend you to do that at least twice per year.

Cleaning

When cleaning your bicycle, do not use a waterjet or other high-pressure water hose. Clean withmild soap or detergent and rinse with water.Rinse all parts well and avoid spraying water onparts such as steering box, crank, seat post andsaddle rails. After cleaning, dry the bicycle with arag and lubricate contact points to guard againstcorrosion.

CorrosionTip

One of the biggest causes of caccumulation on bicycle compand sand from the beaches.Salt is responsible for the acceleratiorosion and sand is abrasive (so it wechanical parts). To avoid this, you neyour bicycle every time you take it to


8/16

7

Riding your Durban

Riding During Low VisibilityRiding during low light or low visibility at night,

dawn, dusk or in the rain and fog is much moredangerous than riding during normal light condi-tions. Adults should always use lights, reflectorsand reflective clothing while riding during lowvisibility.

Reflectors only work if they are clean, whole andassembled correctly. Do not obstruct reflectorswith baggy clothes or bags. Moreover, they onlyreflect light in some directions, so you need lightsand other accessories. Ask your dealer for adviceand make sure that the lights you use conform tolegal requirements.

Riding PositionThe best riding position is one in which you feel

comfortable. A bad tted bicycle can lead to backpain or joint pain. Make sure your saddle and han-dlebars are at the correct height and that you canreach the brakes and shifter comfortably.

For most people, the sole of the foot on the pedalshould be positioned directly over the pedal axle.

The saddle can be moved up and down, forwardand backward and tilted up and down, so try tomove it to get the best t. A badly positioned sad -dle can damage nerves and blood vessels.

When riding, your hips should remain stationaryand your knees should extend to between 20 and25 short of the locked position.

The saddle should be parallel to the ground, but ifit is not comfortable, bend the tip down to relievepressure in the groin, or up to distribute yourweight over a larger area of the saddle.

Moving the seat back makes you exercise thegluteus muscles more intensely and works yourupper thighs. In general, the front of the knees

should not exceed the pedal axle. After reaching acomfortable position, check the seat height again.

Using BrakesDifferent countries have different sta

which brake lever (right or left) contrbrake (front or rear). Be sure you undwhat lever controls which brake befo

Braking distances increase in wet weslow down when it is raining, brake mand make sure you brake in advance

Brakes lose their effectiveness whenthe wheel locks up, so apply pressuresively without allowing your brakes twheel of the bicycle or your bicycle tSkidding does not slow you quicker,

control of speed and direction when Brakes are more efficient before skidfore relieve brake pressure if you sta

If you squeeze down on the front brathinking, you will fly over the handlewheel may squirm behind you. In thatilt your body backwards and slightlyfront brake.

Riding with worn or poorly adjusted dangerous. Keep brake pad surfaces

free of brake oils or lubricants. Replabrakes.


9/16

Riding your Durban

Using GearsBicycle gears are numbered from 1 upwards,

with 1 being the lowest (lighter) gear. If engaged,the grip shifter on the right controls the rearderailleur. The bicycle has six or seven gears. Thelower gears are used for going slower or uphill,and the higher gears are used for going faster ordownhill. Test the gears in a safe place.

Before riding, go through all the gears and makesure that they are all fully functioning. If gear shif-ting is not smooth, we recommend you consultyour professional mechanic. If the rear derailleuris malfunctioning, do not use the highest andlowest gears because the chain may come off.

Make sure chain and cables are lubricated pro-perly before riding.

Using Quick Releases and LatchesQuick releases hold wheels, seat post, handlebar

and handle post in place. When adjusted proper-ly, the seat post, handle post and handlebars willnot rotate and the wheels will not come off.

Before riding, make sure that all quick releasesare tightly fastened. Lift each wheel and dropto verify that it is tightly fastened to the frameand fork. Gently try to rotate the handlebars andsaddle to check for firmness.

Slightly lift the bicycle and drop to test for tre-mor, shake and stability of the frame (especiallythe latches of the frame and the handle post).

TipTo make your latch adjust to layou can apply a drop of thread

screws used to adjust the latches aftthe optimal adjust. We recommend yLOCTITE 270 or a similar threadlocbicycles

Please take your bicycle to a professnic if you are not sure about quick relatches operation or maintenance.

Make sure the frame latch and handle post latch

are properly adjusted and tightly closed before

riding the bicycle. Failing to do so can result in

injury or death.

WARNING

Do not over tighten the stem bolt, han

handle post quick release or any other

device.

WARNING


10/16

Bicycle Safety Checklist

Check tire pressure, wheel alignment, spoketension, and if the spindle bearings are tight.Check for wear and tear on the rims and

other wheel components.

Check brake function. Check if thehandlebars, handlebar stem, handle postand handlebar are adjusted properly andundamaged.

Check for loose links in the chain and thatthe chain rotates freely through the gears.Make sure there is no metal fatigue on thecrank and the cables are operating smoothlyand without damage.

Ensure that the quick releases and boltsare fastened tightly and adjusted properly.Slightly lift the bicycle and drop to test fortremor, shake and stability of the frame (es-pecially the hinges and latches of the frameand the handle post).

Check that the tires are properly inated andthere is no wear and tear.

The bicycle should be clean and without

wear.Look for discolored spots, scratchesor wear, especially on the brake pads, whichcontact the rim.

Check that the wheels are secshould not slide on the hub axleyour hands to squeeze every pa

If the spoke tensions are differewheel. Finally, rotate both wheesure they turn smoothly, are alignot touch the brake pads.

Make sure that your wheels wo,holding each end of the bicyand hitting the wheel downward

Test your brakes by standing obicycle and activating both brakrock the bicycle forward and ba

bicycle should not roll and the bshould remain firmly in place.

Make sure that the brake padswith the rim and check for wear

9

This checklist is a quick way to check if your

bicycle is ready for use.

If your bicycle fails at any time, do not ride it and

schedule a maintenance check-up with a profes-

sional bicycle mechanic.

WARNING


11/16

Folding, Unfolding and Adjustments

Step 1Fold Pedal*

A - Press the pedal to unlock

B - Fold Pedal

* Only bicycles with foldable pedals.

Step 2Lowering the Saddle

A - Unlock the seat post quick releaseB - Lower the saddleC - Lock the seat post quick release when the saddle is in a lower

A B

TipThe saddle should be slightly turned to the left to avoid cothe handle post when the bicycle i s folded.


12/16


Step 3Fold Handle Post

A, B - Unlock the security lockC - Pull the latch leverD - Fold the handle post until it is parallel with the front wheel

A B C D

Step 4Fold Frame

A, B - Unlock the security lockC - Pull the latch leverD - Fold the frame using both hands

Frame side view

A B

Frame top view

C D

11


13/16


Adjusting the Handle PostFor your convenience adjust the height of the handle post using the

following steps:A - Unlock the handle post quick releaseB - Adjust the handlebar up or downC - Lock the handle post quick release at the desired height

A B C

Unfolding

To unfold your bicycle repeat steps 1-4 in reverse ord


14/16


13

HandlepostFollow the steps in this guide to fold the handle-

post. Use an Allen key to adjust the screws on thehandlepost latch as the illustration below.

The pressure increases with the screws tightening.

Adjust the screws until you fnd the ideal pressure.Excessive pressure can prevent the latch to lock.

Forcing to close may damage the system. Whenproperly adjusted, the handlepost must have no playor movement.

Frame LatchFollow the steps in this guide to fold t

post. Use an Allen key to adjust the schandlepost latch as the illustration be

The pressure increases with the screws t

Adjust the screws until you fnd the ideaExcessive pressure can prevent the latch

Forcing to close may damage the systemproperly adjusted, the handlepost must

or movement.

The correct adjust of the folding latches is veryimportant for user safety.

Any looseness or movement may indicate theneed for an adjustment. For this adjustment, youwill need an Allen key.

If this adjustment does not solve the problem,please seek professional service immediately.

Follow the instructions on this page to ensure acorrect adjustment of your Folding Latches.

ADJUSTINGTHE FOLDING LATCHES


15/16

Durban Bikes Limited Warranty

A. GENERAL PROVISIONS

Durban Bikes USA LLC (Durban) will repair orreplace, at its option, any defective part of the bi-cycle covered by this Limited Warranty.

Warranty service must be only performed by adealer or a service center authorized by Durban.Bicycle checks, adjustments, lubrication and pre-ventive maintenance are not covered by this Lim-ited Warranty.

The Owner will be responsible for the transporta-tion of product to and from the dealers or servicecenters place of business. This warranty gives youspecific legal rights and you may have other rights

which vary from state to state.

B. WHAT IS WARRANTED

Bicycle Frame and Parts are warranted against de-fective materials and workmanship for a period of1 (one) year from the purchase date, subject to theterms and conditions of this Limited Warranty.

C. CONDITIONS OF WARRANTY

Before your first ride, the bicycle must be checkedand adjusted by a professional bicycle techni-

cian. The Owner shall demonstrate reasonablecare and use of the bicycle and follow preventivemaintenance, storage, and lubrication schedulesas required by use, climate and other pertinent

factors. Carefully read your manual before ridingyou bicycle.

D. WHAT IS NOT WARRANTED

The warranty does not cover:

Normal wear and tear or anything you break ac -cidentally or deliberately;

Improper assembly or follow-up maintenance;

Installation of parts or accessories not originallyintended or compatible with the bicycle as sold;

Damage or failure due to accident, abuse, ne-glect, misuse or theft;

Modification of the frame, fork, or components;

E. WARRANTY SERVICE

The Owner should immediately stop riding the bi-cycle if a defect becomes known. To secure war-ranty service, the purchaser must report the prod-uct defect and request repair within the applicablewarranty term.

The Owner must present evidence of the initialcheck and adjustments of the bicycle made by aprofessional bicycle technician as well as the pur-

chase date.

Durban Bikes USA LLC2041 Rosecrans, Suite 322El Segundo, CA 90245

Email: [email protected]: 1-855-42-BIKES


16/16

www.durban

Manual Durban English Web

Documents