Mangri Referat IMS&SIP Introduction

IMS&SIP Introduction

M.Mangri-IP&SIP Introduction - 1 -


Version: 01 Owner : Mangri Marin

Author : MM Date:

Guiding: MM Date:



CONTENT

1 INTRODUCTION.................................................................................................................................... 3

2 SCOPE ...................................................................................................................................................... 3

3 UMTS RELEASES OVERVIEW........................................................................................................... 4

4 UMTS RELEASES .................................................................................................................................. 5

5 CONVERGENCE OF TELEPHONY WORLD AND INTERNET WORLD.................................... 6

6 THE UNIFIED NETWORK ................................................................................................................... 8

7 KEY DRIVERS OF NEW DEVELOPMENT ..................................................................................... 11

8 EVOLUTION OF NETWORK ARCHITECTURE ........................................................................... 12

9 MAIN PROTOCOL FOR NEW IMPLEMENTATIONS GATEWAY CONTROL...................... 14

10 IP MULTIMEDIA SUBSYSTEM (IMS) ............................................................................................. 19

11 IMS COMPONENTS............................................................................................................................. 25

12 FEW EXAMPLE OF IMS STANDARD SCENARIOS...................................................................... 29

13 FEW IMPORTANT CHARACTERISTICS OF IMS IMPLEMENTATION ................................. 36

14 ONE EXAMPLE OF IMS SESSION ................................................................................................... 37

15 SIP MESSAGES..................................................................................................................................... 39

16 IFC-INITIAL FILTER CRITERIA ..................................................................................................... 40

17 FMC-FIXED MOBILE CONVERGENCE VERY IMPORTANT FOR THE FUTURE IMPLEMENTATION........ 41

18 ICS-NEW CONCEPT FROM REL 8-IMS CENTRALIZED SERVICES....................................... 42

19 DOMAIN OF INTEREST ..................................................................................................................... 44

20 ABBREVIATIONS ................................................................................................................................ 45



1 Introduction

This document is referring to the tendency of mobile telecommunication. It is in the same time an introduction of IMS&SIP

2 Scope

In this document I am trying to specify the domain of interest.



3 UMTS Releases Overview

Rel 99 Rel4 Rel5 Rel6 Rel7 Rel8

Each year (a lmost) , a new Releas e of the UMTS standard is publis hed Start from GSMCS domain-GSM RAN initially < 10kb/s, evolved to today (EDG E) 384 kb/s GPRSadds PS Domain, in para llel to CS DomainInitially higher transmiss ion ra tes than GSM (max 115 kb/s) can also be used with EDG EShared radio channel (DSCH)=> more eff ic ient usage of rad io resources,because band width demands of e.g. web traffic are highly f luctuating(user needs time to read page) and burstyallows a d irec t connection to e.g. the Internetcharging per data vo lume possible in GSM always charging per time unit

1999 2000 2001 2002 2003 2004 2005 2006 2007 2008



4 UMTS Releases

Below specified the main contribution of these releases: UMTS Release 99 >Frozen 12.1999 UTRAN &R99 Core Highspeed GSM based on WCDMA and ATM(FDD and TDD) Adopt all useful GSM R-99 services UMTS Release 4 ->Frozen 03.2001 Bearer Independent Cs-Core; GERAN A/Gb mode (EGPRS) Cs Core Transport over IP Split CP from UP MGW and MSC-Server UMTS Release 5 ->Frozen 06.2002 IP-UTRAN; IU-Flex; HSDPA;IMS All over IP RNC inter-working with Multiple Core Controllers (Multi Operators in R6) High-speed Downlink Packet Access up to 14 Mbit/s IP Multi-Media Subsystem UMTS Release 6>Frozen Q2 -2005 HSUPA; MBMS Complementing IMS &3.5G HIGH-Speed Uplink Packet Access up to 5.6Mbit/s IP based Mobile Broadcast Multicast Services UMTS Release 7 ->Frozen 06-2007 3.75G HSPA+ Improvements; GERAN Performance (EGPRS2) Performance improvements to HSPDA/HSUPA, Femtocell Performance & QoS to support IMS,PS-Handover UMTS Release 8 ->Expected Q4-2008 LTE LTE/SAE- UTRAN Long Term Evolution and System Architecture Evolution UMTS Release 9 LTE Advances



5 Convergence of Telephony World and Internet World

CPE= Customer Premises Equipment



Today Tomorrow

Telephonenetwork

Mobile radionetwork

IP-Netw ork

Multimedia Access - Advantages: easy to handle reliable mobile

Internet

New wave All over IP



6 The Unified Network

The Vision

Situation TodaySituation Today Target SolutionTarget Solution

VoiceFix and Mobile

VoiceFix and Mobile

FRFR

IPIP

ATMATM

......

The Unified Multi Service

Network


Network



The Data Migration

VoiceVoice

FRFR

IPIP

ATMA TM

......

Th e Un ified Multi Service

Network

The Un if ied Mu lti Service

Netwo rk

P ure technology/standardization matter:How different data services

can transport over a unique data backbone



The Voice Migration

VoiceVoice

FRFR

IPIP

ATMATM

......


Network

The Unif ied Multi Service

Network

Somewhat more complex- From circuit switched to packet switched

- Voice switches need to disappear in the long term

A new network concept supporting voice in a packetized environment is required A new network concept supporting voice in a packetized environment is required



7 Key drivers of new development

Short Term objective: Create new revenue possibilities Removal of boundaries between voice and data opens the way to new kind of services Can be realized relatively quickly with limited investments Long Term objective: Realize cost savings Simpler network More efficient network Cheaper network components Full benefit only realized when all separate networks have fully migrated towards to the target solution FMC FixedMobile Convergence (3GPP and non 3GPP) Seamless Service Continuity over different access networks (Fixed,Cellular, Wlan) Seamless Handover between access technologies Seamless escalation between Voice, Video and Text communication



8 Evolution of network architecture

Or we could use the title from CS to IMS

Traditional telephony - Circuit switch



IMS



9 Main Protocol for new implementations

Gateway control The target of the Gateway control - to enable a simple media gateway implementation with intelligence centralized on a media gateway controller (which is also called a call agent or a Soft-switch) Two gateway control protocols: Media Gateway Control Protocol (MGCP) as the de facto standard H.248/Megaco as the ITU and IETF approved standard. MGCP/Megaco/H.248 MGCP - Media Gateway Control Protocol, IETF [Telcordia (formerly Bellcore)/Level 3/Cisco] MGCP control protocol that specifically addresses the control of media gateways Megaco/H.248 (IETF, ITU) - standard that combines elements of the MGCP and the H.323, ITU (H.248) The main features of Megaco - scaling (H.323) and multimedia conferencing (MGCP) Media control Media control is a form of device control used for network elements that are specialized for advanced media processing. Media control includes instructions to play and record voice files, collect and generate tones (including DTMF touch-tones), establish N-way conferences, perform fax conversions, generate text-to-speech, and perform speech recognition



SIGTRAN A telephone company switch transmits SS7 signals to a SG. The gateway, in turn, converts the signals into SIGTRAN packets for transmission over IP to either the next signaling gateway. The SIGTRAN protocol is actually made up of several components (this is what is sometimes referred to as a protocol stack): Standard IP Common signaling transport protocol (used to ensure that the data required for signaling is delivered properly), such as the Streaming Control Transport Protocol (SCTP) Adaptation protocol that supports "primitives" that are required by another protocols. Bearer Independent Call Control ISUP messages carry both call control and bearer control information, identifying the physical bearer circuit by a Circuit Identification Code (CIC). However, CIC is specific to time-division multiplexed TDM networks. BICC was developed to be interoperable with any type of bearer, such as those based on asynchronous transfer mode ATM and IP technologies, as well as TDM. BICC separates call control and bearer connection control, transporting BICC signaling independently of bearer control signaling. The actual bearer transport used is transparent to the BICC signaling protocol - BICC has no knowledge of the specific bearer technology The ITU announced the completion of the second set of BICC protocols (BICC Capability Set 2, or CS 2) in July 2001; these are expected to help move networks from the current model - which is based on public-switching systems - to a server-based model. The BICC deployment architecture comprises a proxy server and a media gateway to support the current services over networks based on circuit-switched, ATM, and IP technologies, including third-generation wireless. The completion of the BICC protocols is an real and important ITU step toward broadband multimedia networks, because it will enable the seamless of circuit-switched TDM networks to high-capacity broadband multimedia networks. The 3GPP has included BICC CS 2 in the UMTS release 4. Among the future ITU-T plans for BICC are the inclusion of more advanced service support and more utilization of proxies, such as the SIP proxy.



SIP-T SIP-I SIP-T (SIP for telephones) is a mechanism that uses SIP to facilitate the interconnection of the PSTN with IP. SIP-T defines SIP functions that map to ISUP interconnection requirements. This is intended to allow traditional type services to be seamlessly handled in the Internet environment. It is essential that SS7 information be available at the points of PSTN interconnection to ensure transparency of features not otherwise supported in SIP. SS7 information should be available in its entirety and without any loss to the SIP network across the PSTN-IP interface Call Control (Session Control) The ability of a network element to establish new calls, a call in the next generation network can be viewed as a session in which the session establishes either a voice conversation or, ultimately, a multimedia (audio plus video) stream. There are two primary call control protocols unique to packet-based networks: H.323 SIP



H.323, ITU-T H.323 - first call control standard for multimedia networks. Was adopted for VoIP by the ITU in 1996 H.323 is actually a set of recommendations that define how voice, data and video are transmitted over IP-based networks The H.323 recommendation is made up of multiple call control protocols. The audio streams are transacted using the RTP/RTCP In general, H.323 was too broad standard without sufficient efficiency. It also does not guarantee business voice quality SIP - Session Initiation Protocol, IETF SIP client-server protocol, Rq from clients, Rs from servers. Participants are identified by SIP URLs. Requests can be sent through any transport protocol, such as UDP,TCP and SCTP. SIP defines the end system to be used for the session, the communication media and media parameters, and the called party's desire to participate in the communication. Once these are assured, SIP establishes call parameters at either end of the communication, and handles call transfer and termination. The Session Initiation Protocol is specified in IETF Request for Comments (RFC) 2543.



Main transport protocols Real-Time Transport Protocol (RTP) and Real-Time Control Protocol (RTCP) RTP - for end-to-end network transport of communications services requiring real-time data (i.e., audio and/or video). Real-Time Control Protocol (RTCP) for data transport monitoring RTP and RTCP are designed to be independent of the underlying network layers (e.g., UDP/IP, MPLS, or ATM).



10 IP Multimedia SubSystem (IMS)

3GPP consortium consists of ETSI, ARIB, TTA, T1 and CWTS Now in 2008 many networks are migrating to Rel4 UMTS R5 is an all-IP architecture with support for CS terminals. We have already Rel 5, R6, Rel 7 currently working on Rel 8 All-IP architecture is based on GPRS (PS) with multimedia enhancements Support for integration of intelligent services (SIP based, OSA, and CAMEL) IMS is based on IETF protocols: SIP is used for establishing and terminating IP communication sessions RTP/RTCP for media transport SDP for capability negotiation DIAMETER for AAA COPS for policy based QoS control IP-SEC for inter-domain trust relations H.248 (MEGACO) is used for gateway control



Below a General IMS topology:

Gf GiIu-ps'

Iu

GiMr

Gi

Ms

Gi

R Uu MGW

Gn

Gc

Gp

Signalling and Data Transfer Interface Signalling Interface

TE MT UTRAN

GrOther PLMN

SGSN

GGSN

GGSN

EIR

SGSN

Gn

MGCF

R-SGW

MRF

Multimedia IP Networks

PSTN/ Legacy/External

Applications &Services *)

Mm

Mw

Legacy mobilesignalingNetwork

Mc

Cx

R UmTE MT ERAN

Alternative

Network

Mh

CSCF

CSCF

Mg

T-SGW *)

T-SGW

HSS

HSS *)

Applications & Services

MSC server GMSC server

Iu 1 = Iucs (RTP, AAL2)

Iu 2 = Iu (RANAP)

McMc

MAPMAP

SCP

CAP

MGWNb

Nc

Iu 1

Iu 2

R-SGW

Mh

IMS-Architecture Layers CSCF-Call Session Control Function-the IP Switch Here we have three components: S- CSCF Serving CSCF P- CSCF Proxy CSCF I- CSCF Interrogating CSCF IP-CAN IP Connectivity Access Network aGW- Access Gateway(RAN,SGSN,GGSN) Media Gateway Media Transort and Modification MGCF - Media Gateway Control Function MGW - Media Gateway MRF - Media Resource Function-with two components MRFC - Media Resource Function Controller MRFP - Media Resource Function Processor



Service Control -Interworking with Application-Server SIP - Session Initiation Protocol (Mandatory) CAMEL GSMs intelligent network approach (Optional) OSA -Parlay Service Brokering Approach(Optional) Repository HSS-Home Subscriber Server SGW-Signalling Gateway- mapping between SIP and SS7 R-SGW Roaming Signalling Gateway (GSM MAP) T-SGW Transport Signalling Gateway (Telephony ISUP) Descriptions of Interfaces: Interfaces Components IMS Protocol Gm UE, P-CSCF SIP Mw P-CSCF, I-CSCF, S-CSCF SIP ISC S-CSCF, I-CSCF, AS SIP Cx I-CSCF, S-CSCF, HSS DIAMETER Dx I-CSCF, S-CSCF, SLF DIAMETER Sh SIP AS, OSA SCS, HSS DIAMETER Si IM-SSF, HSS MAP Dh SIP AS, OSA, SCF, IM-SSF, HSS DIAMETER Mm I-CSCF, S-CSCF, external IP network Not SpecifiedMg MGCF -> I-CSCF SIP Mi S-CSCF -> BGCF SIP Mj BGCF -> MGCF SIP Mk BGCF -> BGCF SIP Mr S-CSCF, MRFC SIP Mp MRFC, MRFP H.248 Mn MGCF, IM-MGW H.248 Ut UE, AS (SIP AS, OSA SCS, IM-SSF) HTTP Go PDF, GGSN COPS Gq P-CSCF, PDF DIAMETER



Below few requirements of IMS: Use IETF protocols (SIP, SDP) and request any additions to be standardized by IETF Efficient use of radio interface Signal compression Minimum session setup time Higher registration overhead and session based security IPv4&IPv6 support Network initiated de-registration and session termination QoS support Correlation of session and bearer establishment Access and admission control Policy based control Private/Public user identity Remote identity presentation, hiding and assertion Hiding of network topology Emergency services Charging Support for pre- and post-paid Correlation between session and media DTMF and early media are supported



SIP implementation for IMS Here we will have few headers more P-Headers are used to convey information not included in standard SIP PATH and Service-Route Additions to some headers WWW-Authenticate and Authorize VIA, Route Stricter routing paths: P-CSCF to S-CSCF to I-CSCF to S-CSCF to P-CSCF XML body used for transporting information from HSS to the SIP elements (emergency) Specification of timer values (like: request retransmission) More intensive use of some of SIP and SDP extensions (PRACK, UPDATE, qos, offer-answer ...) User Identify IMPI-Private identity Saved on ISIM (not modifiable) Used for AAA Issued by home provider IMPU-Public identity Normal SIP address (URI or TEL number format E164) Identifies the user publicly User has one or more identities Used for routing Can be grouped into implicit registration sets If one of the set is registered then the others are as well At least one is stored on ISIM In case no ISIM is provided Use a temporary identity derived from USIM during initial registration (derived from IMSI) PIDs are then provided by the S-CSCF in its reply to the registration



Below the way to build a service profile:

ImplicitlyRegistered ID

Set 3

Private User Identity 1

PublicUser Identity 1




Set 1

Private User Identity 2





Set 2

Service Profile 1

Service Profile 2

Service Profile 3

Service Profile 4

IMS Subscription



11 IMS Components

P-CSCF- Proxy Call Session Control Function. Here we have the first IMS contact point for the UE this can be named-outbound proxy. This is in charge with: Forward registration to I-CSCF Forward requests to S-CSCF or I-CSCF Forward replies and incoming requests to UE Maintain security association with UE Responsible for compression/decompression Maintain session and registration information Can terminate registrations or sessions if deemed necessary Correlation between SIP and QoS Enforce local policies Possibly support routing to local service infrastructure Discovered through DHCP or during GPRS PDP establishment Generate CDRs Emergency call handling

UE

P-CSCF I-CSCF S-CSCF

BGCF MGCF

HSSVisited-Net Home-Net

As

Gm Mw

ISC

Mj

Mi

MRF

Cx

Sh

I B C F



I-CSCF-Interrogating Call Session Control Function The contact point within an operator Discovered through DNS Assign S-CSCF to a user by contacting the HSS Its act as a THIG -Topology Hiding Inter-Network Gateway Always on the path (RR and Service-Route) of any message leaving the network Encrypt all entries added by the hiding network in outgoing messages looking like with release 7 this functionality has moved to IBCF Hew are generate CDRs also. S-CSCF - Serving Call Session Control Function Has registrar functionality. Acts as a SIP proxy (forward messages ...) It is allocated to a user during registration Always on the path of the users SIP messages (use Service-Route and RR) Enforces service policies based on the users subscription profile Collects session information for billing Interacts with application service platform Chose the appropriate AS based on user profile (initial filter criteria IFC) Forward to AS using ISC interface Acts as user agent when required (Notifications about de-registrations and re-authentications, call termination) UE-User Equipment Contains the SIP user agent Establishes a PDP context for: Signaling Media transport Contains ISIM for authentication Public and private user id User Network address Security algorithms and keys At least a USIM Correlate between session control and QoS reservation



BGCF-Breakout Gateway Control Function Select PSTN/CS domain to forward call to Local MGCF Another BGCF MGCF-Media Gateway Control Function Gateway to PSTN networks Translate SIP messages in appropriate PSTN signals and vice versa Establish bearer with appropriate code Possibly translate codec Act as UA (but no registration required) MRF Media Resource Function Here we have two components MRFC and MRPF Provide conferencing and announcement services Use H.248-MEGACO (or equivalent) between the two components involved Multimedia Resource Control Function (MRFC) Interpret information from S-CSCF and AS Conference booking and floor control from AS for example Control MRPF Multimedia Resource Processor Function (MRPF) Establish bearers based on MRFC requests Media mixing and distribution Media streaming for announcements AS Application Server Services include third party CC, personalized routing, PTT, presence The services are offered by home, visited or third party provider S-CSCF forwards requests to AS base (possible received from HSS-depends on profile) Results of AS sent back to S-CSCF AS can act as UA, redirect or proxy-CAMEL and OSA optional



ISC-IMS-Service Control Based on SIPSIMPLE (SIP for Instant Messaging and Presence Leveraging Extensions) S-CSCF could add charging information S-CSCF could add information to allow the distinction between incoming and outgoing messages HSS-Home Subscription Server Contains user profile information indicating Private and public identities of the user Authentication information Which services and medias the user is eligible for using Filtering criteria for choosing appropriate AS Assist I-CSCF in choosing the appropriate S-CSCF Maintain subscription information about the user Enforce provider policies De-register users with invalid subscription Connected through Cx interface to S-CSCF and I-CSCF (DIAMETER) Connected also to AS (Sh interface) Provide user service information Allow multiple instances by using SLF (Subscription Location Function) I-CSCF asks over Dx the SLF which HSS is responsible for the user IBCF-Interconnect Border Control Function This is an optional component If used then replaces the I-CSCF as the entry point to the network It is built as B2BUA- Back-to-Back User Agent B2BUA-acts as a user agent to both ends of a SIP call. The B2BUA is responsible for handling all SIP signaling between both ends of the call, from call establishment to termination. Each call is tracked from beginning to end, allowing the operators of the B2BUA to offer value-added features to the call. To SIP clients, the B2BUA acts as a User Agent server on one side and as a User Agent client on the other (back-to-back) side. The B2BUA may provide the following functionalities: call management, network inter-working, hiding of network internals (private addresses and network topology), and codec translation between two call legs



12 Few example of IMS standard scenarios

Registration Before the UE performs the GPRS procedure and activates a PDP context for SIP signalling. Here this procedure is not described.

Registration: Request handling P-CSCF behavior(from visited net or foreign net) UE adds private and public identity in the REGISTER message P-CSCF adds a PATH header with its address to the REGISTER message P-CSCF adds P-Visited-Network-Identity to the message Discover the I-CSCF of the user using DNS

OK 200 Service-Route (S-CSCF)

UE

P-CSCF I-CSCF

S-CSCF

HSSVisited Net

Home-Net

Registration Public& Private ID

Registration Public& Private ID Path (P-CSCF)

Status Query

Authorization Request profile

OK 200 Service-Route (S-CSCF)

Register OK 200 S-CSCF->Service route



I-CSCF behavior Determine the right S-CSCF Ask an HSS (Cx Interface with DIAMETER) Ask an SLF (Subscription Location Function) about which HSS to use (Dx Interface with DIAMETER) Adds itself to the PATH list S-CSCF behavior Download the user profile from the HSS Save contents of PATH Generate reply Forward to AS if needed Registration: Reply handling S-CSCF behavior Add service-route to reply with the address of the S-CSCF I-CSCF behavior If it is to stay in the path of future requests then adds itself to the service-route list P-CSCF behavior Store content of service-route Store the public user identities found in the P-Associated-URI



Access Security in IMS

AV = RAND||AUTN||XRES||CK||IK RAND = Random number AUTN = SQNAK || AMF || MAC MAC = Message authentication code AMF = Authentication Management Field AK = Anonymity key XRES = Result CK = Cipher key = f3 (K, RAND) IK = Integrity key = f4 (k, RAND) AK = f5 (K, RNAD) SQN = AK (AUTN)

UE

P-CSCF S-CSCF

HSS

RAND,AUTN,CK,IK RAND,AUTN

AV= RAND,AUTN,CK,IK, XRES

RES RES OK

OK

RES=XRES?



XMAC = f1 (K, (SQN|RAND|AMF) XMAC = MAC? RES = f1 (K, RAND) CK = f3 (K, RAND) IK = f4 (k, RAND) UE (ISIM) and HSS (AuC) share a secret K Based on AKA which provides Mutual authentication between user and network Temporary shared key between UE and P-CSCF Used for establishing an IPSEC tunnel between UE and P-CSCF In case of re-registration, the P-CSCF indicates whether the registration was received in a secure manner. Besides AKA IMS supports: Early IMS with SIP like authentication Supporting TISPAN authentication



Security-Network Domain Security (NDS)

NDS-is using a combinations of cryptographic security mechanisms and protocol security mechanisms applied in IP security (IPsec) Support two interfaces Za: IPSEC connection between different networks Zb: IPSEC connection between components of the same network SEG: Security Gateway Depend on the implementation it is possible to combine SEG with I-CSCF

UE

P-CSCF I-CSCF

S-CSCF

HSS

Visited -Network

SEG SEG

Zb Zb Zb

Zb

Za

Home-Net

Network Domain Security

Zb



State Information S-CSCF: P-CSCF (PATH) User Profile Authentication data Session data P-CSCF S-CSCF (possibly also THIG) (Service-Route) Security association with the UE Allows for checking the integrity and authenticity of the messages Allows issuing a network asserted identity P-Asserted Identity Used for hop-by-hop trust relations SigComp compartments Session data (if session termination is to be supported) Registered public ID and the set of public IDs that were received in the P-Associated-URI header Subscription to registration state of PID I-CSCF Could cache a PID(procc id) to S-CSCF translation



IMS-VOIP Session Setup Flow

Cx-is Diameter SIP-all other signaling

UE A

Visited network of Terminal A

S-CSCF

INV

P- C S C F

Home-Net of B-Term

S-CSCF

P-CSCF

I-CSCF

HSS-B

Visited networkof Terminal B

UEB

OK 200

ACK

INV

Prov.

Home-Net of A-Term

As Acc-Bearer Interconnect BearerBs Acc Bearer

Media Negotiation

Cx-Discover S-CSCF (IMPU-B)

Traffic Bearer resource reservation



13 Few Important Characteristics of IMS implementation

QoS in IMS UMTS can offer different QoS for different kinds of media Conversational, streaming, interactive and background Different classes offer different delay guarantees Different PDP contexts are used for media and signaling Sessions are allocated resources based on SDP Use bandwidth parameter Use local policies regarding used media Session Termination- Network Initiated Termination can occur due to bearer or service related events P-CSCF or S-CSCF can decide to terminate a session Act as UA using maintained state information P-CSCF will inform the GGSN via PCRF-Policy & Charging Rules Function to terminate the bearer Charging Need to correlate bearer resources with IMS session GGSN create charging information that is handed over to P-CSCF Describe which resources are used Need to update information based on changes in media PDP context P-CSCF include the data as P-Charging-Vector in SIP messages Addresses of charging collection functions are also transported in SIP (P-Charging-Function-Address) SIGCOMP SIP messages can become large Long transmission delay High bandwidth usage SIGCOMP specifies a framework for enabling the compression and decompression of messages with various compression algorithms Compressor: Compresses messages and uploads the ByteCode for the corresponding decompression algorithm to the UDVM as part of the SigComp message.



Decompressor (UDVM): Uncompress messages by interpreting the corresponding ByteCode received previously State Handler: Manages compartments with some information to use between received SigComp messages. SigComp itself allows both parties to exchange some status information, and pointers to state to be used

14 One example of IMS Session

UE-A PCSCFS

CSCFI

CSCFS

CSCFP

CSCFUE-B

V-Net-BH-Net-BH-Net-AV-Net-A

Invite/1stSDPofferInvite/1stSDPoffer

InviteInvite Invite Invite/1st SDPoffer

100 (Trying) 100 (Trying)

100(Trying) 100(Trying)

100(Trying)

183 -SessionProgress -1st SDP AnswerPRACK -2nd SDP offer

ResReser 200-OK 2nd SDP answer

ResReserUPDATE -3rd SDP offer

200-OK 3rd SDP answer

180 Ringing

PRACK200-OK

Ringing

200-OK

200-OK

Pik-UP

ACK

ACK

Obs-V-Visited &H-Home



SIP session is initiated by an INVITE containing proposed Media Components (SDP-Offer). INVITE Request uses loose routing-every node looks for next hop towards destination. The received INVITE indicates the SETUP path Via headers added by every Proxy. The 200-OK response should fallow the same path as the INVITE->Response use explicit routing. Observation: In SIP : fallowing the 200 OK the Proxies are not necessarily involved. In IMS: Proxies which wishes to remain in the Path adds Record-Route Header to the INVITE. The Media Steams may fallow a completely different path. Default SIP Routing INVITE-OK-ACK should always pass through Servers mentioned in Via Headers. Subsequent messages are exchanged directly between the end-users (Contact Header). Record-Route Record-Route is a SIP feature that allow the P-CSCF and the S-CSCF to monitor/influence Mid-Session Signaling Record-Route Header inserted in INVITE, is reflected in the 200 OK. No Record-Route is necessary for: Presence Service Trusted Application-Server in the Home Network Subsequent Routing during the session Via Headers (with multiple Branch upon forking) Record-Route Header proxies that requested to remain in the Path



15 SIP Messages

SIP messages contain: 1-st Line specifies the destination and the remote operation required Headers provide routing and application-specific information (e.g.via). Body may contain various information formats ( SDP,HTML,MMS).

IP UDP/TCP/SCTP 1st Linie Headers Body

SIP

Request Request Method Request URI SIP Version

REGISTER,INVITE,MESSAGE(SMS),SUBSCRIBE, NOTIFY ( Presence ), PUBLISH,CANCEL,BYE,OPTIONS,INFO,ACK,PRACK,REFER,UPDATE

Response SIPversion Status code

1xx Provisional Response 2xx Success3xx Redirection4xx Request Failure5xx Server Failure6xx Global Failure

Name:ValueName:Value

Name:Value

Application /SDPsession descriptionprotocol

Application /RLM+XLM Resource list metadata (IM&P)

Order of SIP Headers Hop by Hop (Via) End to End (To) Entity Headers (Content-Length) Body Examples SDP Session Description Protocol PDIF-Presence Information Data Format (RFC-3863) RLM-Resource List Meta Information (RFC-4662)



16 IFC-Initial Filter Criteria

IFC-Initial Filter Criteria iFc-in the Users Profile maps SIP Trigger Events to Application Server SIP Trigger Events marks the reception of specific SIP messages. S-CSCF Service Control Received SIP messages are compared against the Filter Criteria Upon match-the Application-Server is serialized to the call flow (via, record-route) Transparent Service-info may be forwarded to the Application-server (e.g.IMSI) Filter Criteria Filter-criteria are part of the service Profile downloaded in HSS They map SIP Events (methods, headers) to specific application server SPT-Service Point Trigger criteria SIP Methods: REGISTER, INVITE, SUBSCRIBE, MESSAGE Presence, absence and contents of any header Request-URI Direction of the request (MO/MT) Media Type and QoS (SDP)



17 FMC-Fixed Mobile Convergence very important for the future implementation

Enable users to roam from CS to IP networks with no interruption of service E.g., user in WLAN moves to 3G or vice versa CCCF (Call Continuity Control Function) mediates between CS and IMS IMS anchored model Any calls generated by this user will have to be handled with in the IMS world When a user turns on his mobile he is registered to IMS and/or CS User is an IMS subscriber with a user profile in IMS FMC Seamless service continuity over different access network(Fixed, Cellular, WLAN) Seamless escalation between Voice,Video and Text communication. Service Convergence Centralized Service Platform Operate, manage and change the same Services over a range of different access technologies. Device Convergence, Multi-mode Device supporting multiple access technologies (fixed/cellular/wireless) Seamless Handover between access technologies Multi Handover Hierarchy Homogenous Handover within 3GPP-based on GTP Intra RAT HO within the same Radio access Technology Inter RAT HO between 3GPP Family technologies (e.g UTRAN to GERAN) Heterogeneous Handover -non 3GPP-based on MIP Heterogeneous HO between 3GPP technologies (e.g LTE->WiFi)



18 ICS-New concept from Rel 8-IMS Centralized Services

Centralized IMS Application for all Telephony calls Consistent User Experience-same services in All Domains New Rule: Cs-Bearer=IMS-Service-Data-Flow->Cs-Core Telephony remains in the picture ICS Applicability Various Core Technologies CS-Core: GSM, UMTS, Cdma200-1x, PS-Core Various Access Technologies :3GPP Cellular, WiFi, Wireline ICS SCOPE Restriction In Rel8 only AMR Speech and Video-Telephony ICS Justification-1st step towards ALL-over IMS Most of existing PS-core Networks is still QoS-less ICS reuses the existing Telephony infrastructure It simplified the CS-PS convergence which becomes a Seamless CS-like Handover Single Telephony Application located in IMS Call Routing is done in IMS The Cs-Domain MSC role reduces to Inter-MSC Mobility within the 2G/3G Handover Single Telephony Application located in IMS Call Routing is done in IMS The CS-Domain MSC role reduces to Inter-MSC Mobility within the 2G/3G Network ICS Roaming Numbers CSRN (MSRN) CS Roaming Number ->Mobile Terminated IMS->CS->VLR returns CSRN as a response to SRI IMRN IMS Roaming Number ->Mobile Originated CS->IMS->CAMEL triggered forwarding to IMRN Dynamic ICS PSI Public Service ID-> Mobile Originated CS->IMS->PSI received via USSD



MSC-S

MGWCS-DomainDCH or HSPA+

UE

S-CSCF

SCCAnchor

Ue2

IMS

Observation:With black here we have CP and with red UP



19 Domain of interest

In the end of the document I will specify the domain of interest. Based on FMC (Fixed Mobile Convergence) and ICS (IMS Centralized Services concepts) (both of them with very big importance in the future implementations) I could tell that the Tracing-System will occupies a very important place. That will help each IMS operator to identify the problems and to improve the implementations. I have identified this like a very important and not yet standardised domain. I am referring here at tracing end to end between different technologies (3GPP and non 3GPP), implementations, protocols and interfaces, and to correlate end to end these different information. I see here in this futures provocation a possibility to bring my small contribution.



20 Abbreviations

3GPP 3rd Generation Partnership Project, produces UMTS standard AS Application Server, in IMS AuC Authentication Center BSC Base Station Controller, controlling node in GSM RAN CDMA Code Division Multiple Access; each user (application) uses

different "code" on the radio interface CK Cipher Key used for encryption between UE and RNC CN Core Network; in UMTS consisting of CS Domain, PS Domain and CSCF Call State Control Function, network element in IMS CS Domain Circuit-switched Domain, one of the UMTS functional groups DCH Dedicated Channel, one of the transport radio channels DRNC Drift RNC, used in Macro-diversity DSCH Downlink Shared Channel, one of the transport radio channels DTCH Dedicated Transport Channels, one of the logical radio channels EDGE Enhanced Data Rates for GSM Evolution, high bandwidth radio interface for GSM EIR Equipment Identity Register FDD Frequency Division Duplex; uplink and downlink use different frequencies on the

radio interface FDMA Frequency Division Multiple Access; each user (application) uses different

frequency on the radio GERAN GSM EDGE Radio Network GGSN Gateway GPRS Support Node, network element in the PS domain GMM GPRS Mobility Management GMSC Gateway MSC, network element in CS Domain, gateway to external networks GPRS General Packet Radio Service, 2.5 Generation system GSM Global System for Mobile Communications, European 2G System GSN Term to refer to both GGSN and/or SGSN GTP-C GPRS Tunnelling Protocol for the control plane between RNC and GGSN GTP-U GPRS Tunnelling Protocol for the user plane. Realizes PDP context between RNC

and GGSN Go Reference Point between P-CSCF and GGSN HLR Home Location Register, main subscriber database in GSM and GPRS HDSPA High Speed Downlink Packet Access, higher data rate downlink channel for UMTS HSCSD High Speed Circuit Switched Data, higher data rate for GSM HSS Home Subscriber Server = HLR plus IMS functionality I-CSCF Interrogating CSCF, one role of the Call State Control Function in the IMS IETF Internet Engineering Task Force, responsible for Internet Standardization



IK Integrity Key, for integrity protection of signalling messages. IMEI International Mobile Equipment Identity IMS IP Multimedia Subsystem, one of the UMTS functional groups IMSI International Mobile Station Identity IMT-2000 International Mobile Telecommunications at 2000 MHz, 3G concept by ITU IPCAN IP Connectivity Access Network for IMS, e.g. RAN & PS-domain ISIM IMS SIM ITU International Telecommunication Union, Iu Reference Point between CN and RNC LTE/SAE Long Term Evolution and System Architecture Evolution MBMS Multimedia Broadcast and Multicast Service MCC Mobile Country Code, one constituent of PLMN identity and IMSI MGW Media Gateway Function MGFC Media Gateway Control Function MPLS Multiprotocol Label Switching (IETF), IP Traffic Engineering and QoS

technology MRF Multimedia Resource Function MS Mobile Station (term used in GSM and GPRS) MSC Mobile Switching Centre, network element in CS Domain MSIN Mobile Station Identification Number, part of IMSI MT Mobile Termination, part of UE NSAPI Network Service Access Point Name, PDP context identifier at UE P-CSCF Proxy CSCF, one role of the Call State Control Function in the IMS PDP Packet Data Protocol PLMN Public Land Mobile Network -mobile telecommunication network under the

control of a single operator PSTN Public Switched Telephone Network P-TMSI Temporary Mobile Station Identity, used in PS Domain QoS Quality of Service QPSK Quaternary Phase Shift Keying, Modulation Technique used in UMTS R99 UMTS Release 1999 RA Routing Area, for localizing UE in PS domain RAB Radio Access Bearer, Bearer extending from RAI Routing Area Identity, unique ID for identifying a routing area RAN Radio Access Network, Bearer extending from MT to SGSN RANAP RAN Application Protocol RFC "Request for Comment", Specification by IETF S-CSCF Serving CSCF, one role of the Call State Control Function in the IMS SDMA Space Division Multiple Access SDP Session Description Protocol, carried in SIP, encodes the actual session

description SIM Subscriber Identity Module, part of mobile terminal in GSM SIP Session Initiation Protocol (IETF) SGSN Serving GPRS Support Node, in PS domain SGW Signalling Gateway Function, Node in IMS TE Terminal Equipment, part of UE



TMSI Temporary Mobile Station Identity, used in CS Domain Uu Reference Point between UE and UTRAN UE User Equipment (term used in UMTS) UMTS Universal Mobile Terrestrial System, member of the IMT-2000 family for 3G,

successor of GSM USIM Universal Subscriber Identity Module, part of UE UTRAN UMTS Radio Access Network

Mangri Referat IMS&SIP Introduction

Documents

introduction of imssip

mangriipsip introduction

imssip introduction

umts standard

ims components

umts releases overview

example of ims session

mangri marin author