ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT Tender No.1070C16032 Page 1 of 87 ONGC MANGALORE PETROCHEMICALS LIMITED (A Subsidiary of Mangalore Refinery and Petrochemicals Limited) Mangalore Special Economic Zone, Permude, Mangalore – 574 509 ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT (DOMESTIC COMPETITIVE BIDDING UNDER OPEN TENDER BASIS) TENDER/BIDDING DOCUMENT NO: 1070C16032
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 1 of 87
ONGC MANGALORE PETROCHEMICALS LIMITED (A Subsidiary of Mangalore Refinery and Petrochemicals Limited)
Mangalore Special Economic Zone, Permude, Mangalore – 574 509
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC MANGALORE
PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
(DOMESTIC COMPETITIVE BIDDING UNDER OPEN TENDER BASIS)
TENDER/BIDDING DOCUMENT NO:
1070C16032
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 2 of 87
IMPORTANT POINTS TO NOTE
TENDER DOCUMENT NO 1070C16032
WORK/ JOB ANNUAL RATE CONTRACT FOR ELECTRICAL
MAINTENANCE JOBS FOR ONGC MANGALORE
PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
AREA OF WORK SPECIAL ECONOMIC ZONE (SEZ)
BIDDING METHODOLOGY TWO BID SYSTEM
PUBLISHING OF TENDER DOCUMENTS
ON WEBSITE
10-Aug-2016
COST OF TENDER DOCUMENT Rs. 2000/- (NON REFUNDABLE)
EARNEST MONEY DEPOSIT RS 61,000/- (RS. SIXTY ONE THOUSANDS ONLY)
BID EVALUATION/ QUALIFICATION
CRITERIA
REFER BID EVALUATION/ QUALIFICATION CRITERIA
GIVEN IN TENDER DOCUMENT.
LAST DATE & TIME OF RECEIPT OF PRE-
BID QUERIES
Up to 17:00 hours on 17-Aug-2016
DATE, TIME AND VENUE OF PRE–BID
MEETING
11:00 hours (IST) on 19-Aug-2016 AT ONGC MANGALORE
PETROCHEMICALS LIMITED, Mangalore Special Economic
Zone, Permude, Mangalore – 574 509
LAST DATE FOR SUBMISSION OF BID 14:00 hours (IST) on 08-Sep-2016
DATE & TIME OF UNPRICED TECHNO-
COMMERCIAL BID OPENING
AT 15:00 HOURS (IST) ON LAST DATE OF BID SUBMISSION
/ EXTENDED DATE OF BID SUBMISSION
Bidding/Tender Document and
Corrigenda/Addenda
Bidder can download the Bidding/Tender Document from OMPL’s
website http://www.ompl.co.in/tenders
Corrigenda/Addenda, if any, shall also be available on the referred
web sites. Further, bidder shall give an undertaking on their letter
head that the content of the bidding document have not been altered
or modified.
Bidders, who are downloading the bid document from website, are requested to inform OMPL about their company
details and address for communication on the following email IDs : [email protected]/
2 Confirm that you have completed the above work within last 3 years from bid due date
submission
3 Blank copy (without price) of Schedule of Rates duly signed and stamped on each page
has been submitted
4 Please confirm that Additional Formats attached with this proposal form have been
duly filled in signed and stamped
5 Confirm that your Bid is valid for 90 days from the last date of submission of Bid
6 Confirm that price has been submitted in a separately sealed envelope super scribing
"PRICE PART" in One original
7 Confirm that rate/ price has been quoted for all items of SOR
8
Confirm that deviation/terms & conditions are not mentioned in the price part. In case
any terms and condition is mentioned in the price part, the same shall be treated as null
and void
9 Confirm that correction fluid is not used in the price Part In case of any correction, the
same shall be signed and stamped by authorised signatory.
10 Confirm your compliance to TERMS AND CONDITIONS of Bidding Document
11
Confirm that you have studied complete Bidding Document including Technical and
Commercial part and your Bid is in accordance with the requirements of the Bidding
Document
12 Confirm your compliance to total Scope of Work mentioned in the Bidding Document
13 Confirm your acceptance for `Scope of Supply' mentioned in the Bidding Document
and confirm that all materials shall be supplied as per Standards and Specification
14 Confirm your acceptance for Time Schedule as mentioned in Bidding Document
15 Confirm that the bid has been submitted on zero deviation basis
16 Confirm that your quoted price excludes all taxes & duties
17 Confirm that while submitting your price, you have taken consideration of scope of
supplies, scope of work and technical requirement mentioned in Bidding Document
18
Confirm that you are meeting the Technical, Commercial & Financial Criteria as
mentioned in the BQC of the tender document and you
have submitted all the relevant details/documents in support of the same.
19
Confirm that Bidders should not have any criminal proceedings going on against them.
Bidders should not be on the holiday list of OMPL or any other PSUs. Categorical
details to be provided for the same
Important Note: Non-compliance to any of the BQC will lead to outright rejection of the bid without any further reference to the
bidders.
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 43 of 87
FORMAT-V (Proforma of Bank Guarantee)
PROFORMA OF BANK GUARANTEE
(FOR EARNEST MONEY DEPOSIT AS APPLICABLE)
(On non-judicial paper of appropriate value)
1) In consideration of M/s ONGC Mangalore Petrochemicals Ltd., An SEZ Unit registered under the Companies Act, 1956,
having its Registered Office at Mangalore Special Economic Zone , Permude Village, Mangalore 574 509, hereinafter called
“OMPL” which expression shall, unless repugnant to the context or contrary to the meaning thereof, include its successors and
assigns having invited / floated Tender to_______________________________________________________Proprietorship /
Partnership Firm / Company registered under the Indian Partnership Act, 1932 / the Companies Act, 1956, having its office
at___________________________________________________, (hereinafter called “the Bidder” which expression shall,
unless repugnant to the context or contrary to the meaning thereof, include its successors and assigns vide Tender
No._____________ dated_______________ (hereinafter called “the Tender” which expression shall include any amendments
/ alterations to the Tender by OMPL for the supply of goods to / execution of services for OMPL and OMPL having agreed
not to insist upon immediate payment of Earnest Money for the fulfillment and the performance of the said Tender in terms
thereof on production of an acceptable Bank Guarantee for an amount of
Rs.____________(Rupees_____________________only). We,______________ having office
at________________________………….. and Head Office at ………………………………………. (hereinafter referred to
as “The Bank” which expression shall, unless repugnant to the context or contrary to the meaning thereof, include its
successors and assigns at the request and on behalf of the Bidder hereby agree to pay to OMPL without any demur on first
demand an amount not exceeding Rs._______________(Rupees______________________only) against any loss or damage,
costs, charges and expenses caused to or suffered by OMPL by reason of non-performance and non-fulfillment or for any
breach on the part of the Bidder of any of the terms and conditions of the said Tender.
2) We___________further agree that OMPL shall be the Sole Judge whether the said Bidder has failed to perform or fulfill
the said Tender in Terms thereof or committed breach of any of the terms and conditions of the Tender and the extent of loss,
damage, costs, charges and expenses suffered or incurred or would be suffered or would be incurred by OMPL on account
thereof.
3) We________Bank further agree that the amount demanded by OMPL as such shall be final and binding on the Bank and
the Bank undertake to pay to OMPL the amount so demanded on first demand and without any demur notwithstanding any
dispute raised by the Bidder or any suit or other legal proceedings including Arbitration pendings before any Court, Tribunal
or Arbitrator relating thereto and our liability under this guarantee being absolute and unconditional.
4) We,_______________Bank, further agree with OMPL that OMPL shall have the fullest liberty without our consent and
without affecting in any manner our obligations hereunder to vary any of the terms and conditions of the said Tender or
extend time for the performance by the Bidder from time to time or to postpone for any time any of the powers exercisable
by OMPL against the Bidder and to forbear to enfore any of the terms and conditions relating to the Tender and we shall not
be relieved from our liability by reason of any such variation or extension being granted to the Bidder or for any forbearance,
act or omission on the part of OMPL or any indulgence by OMPL to the Bidder or by any such matter or things whatsoever
which under the law relating to sureties would but for this provision have the effect of relieving us.
5) NOTWITHSTANDING anything herein before contained, our liability under this guarantee is restricted to
Rs._________(Rupees________________________). Our liability under this guarantee shall remain in force until expiration
of 160* days from the date of opening of the said Tender. Unless a demand or claim under this guarantee is made on us in
writing within the said period, that is, on or before____*___all rights of the Messers under the said guarantee shall be forfeited
and we shall be relieved and discharged from all liabilities thereunder.
6) We,__________Bank, further undertake not to revoke this guarantee during its currency except with the previous consent
of OMPL in writing.
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 44 of 87
7)This guarantee shall not be affected by any change in the constitution of the Bidder or the Bank or OMPL and shall remain
in full force and effect until the liabilities of the Bank are discharged by OMPL
IN WITNESS WHEREOF the Bank has executed this document on this_________day of__________2016.
For_________Bank
*Pl. mention/put specific date
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 45 of 87
SECTION-V PRICE BID FORMAT
FORM SP 0-SUMMARY
SUMMARY SHEET
Sr. No. Description Amount in Rupees excluding
taxes & duties
A TOTAL ESTIMATED COST AS PER SP-1 30,43,836.00
B
Percentage increase/ decrease on Total estimated
cost
(i.e. on A above ) applicable on all items of SP-1
In figure (+/-).....%
Quoted Percentage In words.
. . . . . . . . . . . . . . . . . . .
C
GRAND TOTAL (Total amount after considering percentage Increase/
Decrease as above )
GRAND TOTAL ( Total Amount including quoted percentage In Words) . . . . . .
. . . . . . . . . . . . . . . . . . . .
D Applicable KVAT, if any please specify
Note:
1. Taxes & Duties: OMPL is an approved SEZ Unit in Mangalore Special Economic Zone in terms of the Special Economic
Zone Act, 2005, Accordingly supply of goods and services for the authorized operations in SEZ Area are eligible for
exemption from taxes and duties, levies namely, Duties of Customs, Excise Duty, Central Sales Tax & Service Tax and
related cess thereon. Bidder shall consider these tax exemptions available under SEZ provisions and quote the price without
charging these taxes and duties. Bidder shall follow the applicable procedures for availment of such tax exemption / benefits
for which OMPL shall provide necessary documents/certificate to bidders.
OMPL being an SEZ unit,
a) Excise Duty (ED) is Nil against Form ARE-I. OMPL shall provide necessary SEZ certificate/documents to avail ARE-1
from the respective Excise range office to the bidder for availing benefit of exemption of Excise duty.
b) CST is exempted against Form-I. OMPL will issue Form-I for exemption of CST. In case Form-I is not applicable,
OMPL will issue Form-C for concessional CST.
c) Service Tax is Nil against Form A1/A2.
d) Bidder shall indicate the KVAT if applicable on billing to OMPL separately in the price bid format and the same shall be
reimbursed at actuals on the basis of KVAT shown in the Tax Invoice / Bill of Sale along with supporting document for
claiming the KVAT benefit by OMPL.
The BID Price shall be exclusive of taxes and duties which are either EXEMPTED or REFUNDABLE. However, the
quoted price shall be inclusive of taxes which are NON-REFUNDABLE/NOT EXEMPTED for OMPL.
For details regarding taxes & duties and exemption for OMPL being an SEZ unit, please refer clause no. 8 of GCC above.
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 46 of 87
2. Quantities shown in SOR are indicative only. No minimum quantity/value is guaranteed. However, payment shall be
released based on the actual quantity executed by the contractor based on the SOR rate awarded. Unless otherwise agreed to
in the terms of the Work order, the price shall be firm and not subject to escalation for any reason whatsoever till the
execution of entire work, even though it might be necessary for the Work order execution to take longer than the completion
period specified in the Work order.
3. All expenditure related to the scope of work is to be included in the quote.
4. OMPL reserves the right to ask for detailed break-up of the quote submitted. The same to be provided whenever asked for
by OMPL.
5. Bidders are requested to submit their offer on firm price basis. In case of any increase in the minimum Wages by Central
Government wages during the contractual period or extended period, the contractor shall bear the same. OMPL shall not
entertain any other claim for compensation, whatsoever except the prices fixed for the services under the contract. Bidders
are requested to cognizance of the same & submit their quote accordingly
6. No overwriting is allowed. The rates should be quoted in indelible ink. Cutting if any must be properly initiated by
authorized signatory.
7. Evaluation of the bid shall be done overall least cost (L-1) basis to OMPL.
SIGN & STAMP OF BIDDER
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 47 of 87
FORM SP 1
Sn Description Qty Unit Rate Total Amount
A CABLE LAYING JOB
1 Cable Laying in Trenches
LAYING OF LT POWER/ CONTROL/ TELEPHONE/ INSTRUMENT/ CCTV/ COMPUTER AND OTHER CABLES IN TRENCHES. Horizontal and vertical laying of one or more armoured / unarmoured XLPE LT power(voltage grade upto 1.1 KV)/ control/ telephone/ instrument/ CCTV/computer and other cables of following sizes in pre-excavated cable trench or existing trench / RCC or Hume or Stoneware or Metal pipe/ masonry duct, fixing of number tags (if required), testing and transportation from stores to site, unpacking, straightening, dressing of cable and returning the empty drum with unused cable, if any, to stores etc. all complete with labour and materials as per the drawings, specifications and directions of the Engineer-in-charge. NOTE: Cables will be supplied by the Owner free of cost.
a Overall diameter upto 35mm 200 mtr 25.53 5106.00
b Overall diameter >35mm but upto 55mm 200 mtr 35.98 7196.00
c Overall diameter >55mm but upto 75mm 100 mtr 46.44 4644.00
d Overall diameter > 75mm 100 mtr 67.36 6736.00
2 Cable Laying on Cable Trays/Structures
LAYING OF LT POWER/ CONTROL/ TELEPHONE/ INSTRUMENT/ CCTV/ COMPUTER AND OTHER CABLES ON CABLE TRAYS/STRUCTURES. Horizontal and vertical laying of one or more armoured / unarmoured XLPE LT power(voltage grade upto 1.1 KV)/ control/ telephone/ instrument/ CCTV/computer and other cables of following sizes on cable racks/wall and steel structure upto any height, fixing of saddles, aluminium strips, number tags ( if required), testing and transportation from stores to site, unpacking, straightening, dressing of cable and returning the empty drum with unused cable, if any, to stores etc. all complete with labour and materials as per the drawings, specifications and directions of the Engineer-in-charge. NOTE: Cables will be supplied by the Owner free of cost.
a Overall diameter upto 35mm 100 mtr 27.62 2762.00
b Overall diameter >35mm but upto 55mm 100 mtr 40.17 4017.00
c Overall diameter >55mm but upto 75mm 50 mtr 59.00 2950.00
d Overall diameter > 75mm 50 mtr 86.19 4309.50
3 Temporary cable laying & dismantling of cables
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 48 of 87
Temporary laying amd dismantling of following cables armoured/unarmoured, power/control/telecommunication/computer of different voltage grades/sizes/types for temporary connection including transportation of cable from stores/another site and returning the same after dismantling to store, all complete with labour and material as per the directions of Engineer-in-Charge
a Overall diameter upto 35mm 200 mtr 13.37 2674.00
b Overall diameter >35mm but upto 55mm 100 mtr 18.60 1860.00
c Overall diameter >55mm but upto 75mm 100 mtr 23.82 2382.00
d Overall diameter > 75mm 100 mtr 29.05 2905.00
4 Dressing of Cables
Dressing of cables in underground trenches, cable trays/racks including supply and fixing of clamps etc wherever necessary as per the direction of Engineer-in-Charge
a Overall diameter upto 35mm 200 mtr 13.37 2674.00
b Overall diameter >35mm but upto 55mm 100 mtr 14.41 1441.00
c Overall diameter >55mm but upto 75mm 100 mtr 15.45 1545.00
d Overall diameter > 75mm 100 mtr 16.50 1650.00
5 HT Cable Laying in Trenches
LAYING OF HT POWER CABLES IN TRENCHES. Horizontal and vertical laying of one or more armoured XLPE HT power(voltage grade above 1.1 KV but not exceeding 33kV) of following sizes in pre-excavated cable trench or existing trench / RCC or Hume or Stoneware or Metal pipe/ masonry duct, fixing of number tags ( if required), testing and transportation from stores to site, unpacking, straightening, dressing of cable and returning the empty drum with unused cable, if any, to stores etc. all complete with labour and materials as per the drawings, specifications and directions of the Engineer-in-charge. NOTE: Cables will be supplied by the Owner free of cost.
a Overall diameter upto 35mm 200 mtr 27.62 5524.00
b Overall diameter >35mm but upto 55mm 100 mtr 40.28 4028.00
c Overall diameter >55mm but upto 75mm 100 mtr 57.56 5756.00
d Overall diameter > 75mm 100 mtr 83.53 8353.00
6 HT Cable Laying on Cable Trays/Structures
LAYING OF HT POWER CABLES ON CABLE TRAYS/STRUCTURES. Horizontal and vertical laying of one or more armoured XLPE HT power (voltage grade above 1.1 KV but not exceeding 33kV) cables of following sizes on cable racks/wall and steel structure upto any height, fixing of saddles, aluminium strips, number tags ( if required), testing and transportation from stores to site, unpacking, straightening, dressing of cable and returning the empty drum with unused cable, if any, to stores etc. all complete with labour and materials as per the drawings, specifications and directions of the Engineer-in-charge. NOTE: Cables will be supplied by the Owner free of cost.
a Overall diameter upto 35mm 50 mtr 29.71 1485.50
b Overall diameter >35mm but upto 55mm 50 mtr 43.41 2170.50
c Overall diameter >55mm but upto 75mm 50 mtr 62.24 3112.00
d Overall diameter > 75mm 50 mtr 89.44 4472.00
7 Dismantling of cables & Rolling back to cable drums
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 49 of 87
Dismantling/Puling out the LT/HT, XLPE, Power/Control, armoured/Unarmoured cables of various voltage grades/types/sizes/makes from the trench/pipes/ structures/racks or trays, declamping and rolling it back to empty drums, returning the drum to the store including transportation as per the direction of Engineer-in-Charge, all complete with manpower & materials.
a Overall diameter upto 35mm 50 mtr 11.96 598.00
b Overall diameter >35mm but upto 55mm 50 mtr 15.68 784.00
c Overall diameter >55mm but upto 75mm 50 mtr 19.40 970.00
d Overall diameter > 75mm 50 mtr 23.12 1156.00
TOTAL 93,260.50
Sn Description Qty Unit Rate Total Amount
B LIGHTING MAINTENANCE
1 Lamp Replacement
Replacing & commissioning of following lamps suitable for 240V, 50Hz, AC supply , installed in the existing street light / Floodlight Mast / Wall Mounted fixtures / Ceiling Mounted / Pole mounted / fittings including transportation of lamps from owner's stores to site, returning the damaged lamps to Engineer-in-Charge, rectifying the circuit faults, supply of small hardwares & other consumables like PVC tapes, connectors, carrying ladder as and when required. Contractor shall keep ladders & scaffolding materials as per requirement for day to day activites, however, ladder or scaffolding as required will be provided by OMPL at the discretion of EIC and as per best site practices. All complete with labour, material, tools & tackles as per the direction of Engineer-in Charge. Note: Lamps will be supplied by OMPL free of cost
a 150W / 250W HPMV or HPSV 2000 Nos 132.61 265220.00
b 400W HPMV or HPSV 200 Nos 161.70 32340.00
c 60W/100W/200W GLS Lamp 50 Nos 99.69 4984.50
d 9W/11W/13W/18W/25W/36W/40W CFL/Fluorescent Lamp
500 Nos 99.69 49845.00
2 Choke/Ignitor/Condensor/Holder Replacement
Replacing & commissioning of following spares for following lamps, including transportation of spares from Owner's store to site, returning the damaged spare to EIC, supply of small hardwares & other consumables like PVC tape, connectors etc. All complete with labour, materials, tools & tackles, carrying ladder as and when required. Contractor shall keep ladders & scaffolding materials as per requirement for day to day activites, however, ladder or scaffolding as required will be provided by OMPL at the discretion of EIC and as per best site practices. All complete with labour, material, tools & tackles as per the direction of Engineer-in Charge. Note: Materials as required will be supplied by OMPL free of cost
a Ballast suitable for 125W/250W HPSV/HPMV lamps
500 Nos 132.61 66305.00
b Ballast suitable for 400W HPMV/HPSV lamps for HLM
100 Nos 161.70 16170.00
c Ignitors/Capacitors suitable for 125/250W lamps
500 Nos 132.61 66305.00
d Ballast suitable for 18/36/40W fluorecent lamps 200 Nos 99.69 19938.00
e Starters suitable for 18/36/40W fluorescent lamps
100 Nos 99.69 9969.00
f Holders suitable for 18/36/40W fluorescent lamps
100 Nos 99.69 9969.00
g E27/E40/B22D3 Holder 100 Nos 99.69 9969.00
3 Cable/Conduit laying
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 50 of 87
a
Supply & Installation of 20mm Casing & Capping (Recogold/Avonplast make) including supply of all necessary hardwares including saddles, screws, plugs etc as required and as per direction of Engineer-in-Charge.
10 mtr 93.89 938.90
b
Supply and Installation of 25mm Casing & Capping (Recogold/Avonplast make) including supply of all necessary hardwares including saddles, screws, plugs etc as required and as per direction of Engineer-in-Charge.
10 mtr 110.35 1103.50
c
Supply and Installation of 20mm PVC Conduit (Avonplast/VIP make) including supply of all necessary hardwares including saddles, screws, plugs etc as required and as per direction of Engineer-in-Charge. Conduits may be laid and installed on surface or can be concealed. In case of concealed wiring, civil work shall be in OMPL scope
10 mtr 110.35 1103.50
d
Supply and Installation of 25mm PVC Conduit (Avonplast/VIP make) including supply of all necessary hardwares including saddles, screws, plugs etc as required and as per direction of Engineer-in-Charge. Conduits may be laid and installed on surface or can be concealed. In case of concealed wiring, civil work shall be in OMPL scope
10 mtr 125.83 1258.30
e
Supply and Installation of 20mm GI Conduit (approved make) including supply of all necessary hardwares including saddles, screws, plugs etc as required and as per direction of Engineer-in-Charge. Conduits may be laid and installed on surface or can be concealed. In case of concealed wiring, civil work shall be in OMPL scope
10 mtr 160.00 1600.00
f
Supply and Installation of 25mm GI Conduit (approved make) including supply of all necessary hardwares including saddles, screws, plugs etc as required and as per direction of Engineer-in-Charge. Conduits may be laid and installed on surface or can be concealed. In case of concealed wiring, civil work shall be in OMPL scope
10 mtr 180.00 1800.00
6 Aviation Lamp
a
Removal and repair of aviation light fixture. Job executing personnel has to climb monkey ladder with all necessary tools to the specified level to remove the aviation fixture as per directions of Engineer-in-Charge. No extra charges shall be paid If the job executing personnel climbs the monkey ladder to access the requirement of tools and tackles. Crane/Hydra will be provided by OMPL if required for bringing down the aviation lamp. Replacement of components like choke/lamp/glass irrespective of the number of components/cable lugging & glanding/sealing as per the direction of the Engineer-in-Charge. Supply of small hardwares like lugs, glands, sealing material, cleats etc shall be in erection contractor scope. NOTE: Supply of Choke/Lamp/Glass will be in OMPL Scope of Supply.
i Removal of aviation light fixture above 60m height 1 Nos 1700.74 1700.74
ii Removal of aviation light fixture above 30m height and up to 60m neight
1 Nos 1059.93 1059.93
iii Removal of aviation light fixture up to 30m height 1 Nos 551.74 551.74
b
Installation of aviation light fixture. Job executing personnel have to climb monkey ladder with all necessary tools to the specified level to install the aviation fixture. All necessary hardwares shall be in erection contractor scope. No extra charges shall be paid If the job executing personnel climbs the monkey ladder to access the requirement of tools and tackles. Job shall include fixing of avaition lamp, testing & commissioning in all respect inclusive of small consumables all complete with labour & material as per direction of Engineer-in-Charge. NOTE: Supply of Choke/Lamp/Glass will be in OMPL Scope of Supply.
i Installation of aviation light fixture above 60m height 1 Nos 2008.56 2008.56
ii Installation of aviation light fixture above 30m height and up to 60m height
1 Nos 1191.58 1191.58
iii Installation of aviation light fixture up to 30m height 1 Nos 663.06 663.06
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 51 of 87
7 Cleaning of Lighting Fixture
Cleaning of the below lighting fixtures alongwith perfex cover (wherever applicable) with the help of surf powder. Job shall include removal of the cover wherever applicable , washing the lighting fixture along with the cover, cleaning with fresh water & cloth and refixing in the same position. It also includes arranging ladder as and wherever required, providing scaffolding at all heights with necessary tools & tackles. All complete with labour & materials a per the directions of the EIC.
a Street Light Fixtures 50 Nos 57.86 2893.00
b Tube Light Fitting/CFL/Ceiling fan/Exhaust fan at any height inside a building
100 Nos 46.28 4628.00
c HPMV/HPSV lamp of FLP/increased safety/weatherproof or any similar fitting upto 250W
100 Nos 57.86 5786.00
8 POINT WIRING
Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm. PVC insulated, copper conductor cable in recessed conduit as required. Job shall include cost of wire, conduit with accessories, ceiling rose, MS box with phenolic laminated sheet and switches etc as required. NOTE: Only ISI marked conduits, cables, switches and scoket outlet of approved make shall be used.
a Conduit length upto 2.5m - Group A 2 nos 586.74 1173.48
b Conduit length above 2.5m and upto 3.5m - Group B
2 nos 710.55 1421.10
c Conduit length above 3.5m and upto 4.5m - Group C
2 nos 887.04 1774.08
d Short Point (upto & including 3mtr) 2 nos 623.71 1247.42
e Medium Point (conduit length more than 3 mtr but upto 6 mtr)
2 nos 862.76 1725.52
f Long Point (conduit length more than 6 mtr but upto 10 mtr)
2 nos 1206.67 2413.34
g Special Point (Conduit length more than 10m)
2 nos 2425.33 4850.66
9 Circuit Fault Rectification
Rectification of circuit faults in FLp/non FLP junction boxes/JBs/DBs/Switchboards etc including supply of minor consumables costing less than Rs.6/- per complaint. All complete with labour & materials as per the directions of the Engineer-in-Charge. NOTE: Materials used by the contractor shall not exceed Rs.6/- per complaint. Materials exceeding Rs.6/- per complaint shall be supplied by owner free of cost. Job shall also include application of PVC Putty/M-Seal on the fittings to avoid any ingress as per the direction of the EIC. Putty shall be supplied free of cost by the owner.
50 nos 99.10 4955.00
TOTAL 5,98,861.91
Sn Description Qty Unit Rate Total Amount
C SUPPLY & INSTALLATION JOBS
1 MCBs (5 amps to 32 amps)
Supply & fixing of 5 amps to 32 amps rating 240/415 volts, 50Hz, 10KA, G series miniature circuit breakers (MCBs) (suitable for motors & other inductive loads confirming to IS 8828:1996, IEC 60898:2002) of following poles in the existing DBs complete with connection, testing & commissioning etc as required and direction of Engineer-in-Charge. Note: ISI marked MCBs of L&T, Indo Asian,Schneider, Anchor, Legrand shall be used.
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 52 of 87
a Single Pole (Supply & Installation) 2 Nos 220.00 440.00
b Single Pole (Only Installation) - MCB will be free issue item. Other consumables in Contractors Scope
2 Nos 66.00 132.00
c Double Pole (Supply & Installation) 2 Nos 470.00 940.00
d Double Pole (Only Installation) - MCB will be free issue item. Other consumables in Contractors Scope
2 Nos 141.00 282.00
e Triple Pole (Supply & Installation) 1 Nos 1250.00 1250.00
f Triple Pole (Only Installation) - MCB will be free issue item. Other consumables in Contractors Scope
1 Nos 375.00 375.00
g Four Pole (Supply & Installation) 1 Nos 1850.00 1850.00
h Four Pole (Only Installation) - MCB will be free issue item. Other consumables in Contractors Scope
1 Nos 555.00 555.00
2 MCBs (40 amps to 63 amps)
Supply & fixing of 40 amps to 63 amps rating 240/415 volts, 50Hz, 10KA, G series miniature circuit breakers (MCBs) (suitable for motors & other inductive loads confirming to IS 8828:1996, IEC 60898:2002) of following poles in the existing DBs complete with connection, testing & commissioning etc as required and direction of Engineer-in-Charge. Note: ISI marked MCBs of L&T, Indo Asian,Schneider, Anchor, Legrand shall be used.
a Double Pole (Supply & Installation) 2 Nos 600.00 1200.00
b Double Pole (Only Installation) - MCB will be free issue item. Other consumables in Contractors Scope
2 Nos 180.00 360.00
c Four Pole (Supply & Installation) 1 Nos 1100.00 1100.00
d Four Pole (Only Installation) - MCB will be free issue item. Other consumables in Contractors Scope
1 Nos 330.00 330.00
3 RCCBs of following rating
Supply & fixing following rating, four pole, (three phase & neutral) 415 volts, residual current circuit breaker (RCCBs) ISI marked, having a sensitivity current upto indicated mA in the existing MCB DB complete with connections, testing & commissioning etc as required & direction of Engineer-in-Charge. ISI marked RCCBs of L&T, Indo Asian,Schneider, Anchor, Legrand shall be used.
a 40amps, 30mA (Supply & Installation) 2 Nos 2800.00 5600.00
b 40amps, 30mA (Only Installation) - RCCB will be free issue item. Other consumables in Contractors Scope
2 Nos 840.00 1680.00
c 63amps, 30mA (Supply & Installation) 1 Nos 2850.00 2850.00
d 63amps, 30mA (Only Installation) - RCCB will be free issue item. Other consumables in Contractors Scope
1 Nos 840.00 840.00
e 63amps, 300mA (Supply & Installation) 1 Nos 2900.00 2900.00
f 63amps, 300mA (Only Installation) - RCCB will be free issue item. Other consumables in Contractors Scope
1 Nos 840.00 840.00
4 PVC Insulated Copper Cable
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 53 of 87
Supply, laying, connection of the following sizes of 1.2kV grade PVC insulated copper conductor Single Core Multi Strand as per IS:694 wire of Havells/Anchor/Finolex/ Rallison/KEI make through already laid recessed conduit including supply of copper lugs for end termination, PVC ferrules for wiring identification at both end (Excluding supply & installation of conduit). All complete with labour & material, tools & tackles as per direction of Engineer-in-Charge. Note: Phase colour wire shall be Red, Yellow & Blue, Neutral shall be Black & earth shall be of greeen colour. Computerized printing for identification of Make, Grade & Size of wire in Sq. mm. should be available on outer PVC insulation.
a 1.5 sq. mm (7/0.53) (Supply & Installation) 100 mtr 24.00 2400.00
b 1.5 sq. mm (7/0.53) (Only Installation) - Wire will be free issue item. Other consumables in Contractors Scope
100 mtr 8.00 800.00
c 2.5 sq. mm (7/0.67) (Supply & Installation) 100 mtr 36.00 3600.00
d 2.5 sq. mm (7/0.67) (Only Installation) - Wire will be free issue item. Other consumables in Contractors Scope
100 mtr 10.00 1000.00
e 4 sq. mm (7/0.85) (Supply & Installation) 100 mtr 52.00 5200.00
f 4 sq. mm (7/0.85) (Only Installation) - Wire will be free issue item. Other consumables in Contractors Scope
100 mtr 10.00 1000.00
5 Supply & Fixing of Misc. Wiring Accessories
Supply, fixing & connection of 250V flush type / tumbler anchor make or approved equivalent switch, socket bell, puch etc on perpex sheet on MS box including supply & fixing of nuts, bolts etc but excluding the supply of perpex sheet & MS Box all complete with labour & materials as per direction of EIC.
a 1 way 5/6 amps piano type switch with ISI mark 10 Nos 41.37 413.70
b 1 way 15/16 amps piano type switch with ISI mark 10 Nos 76.56 765.60
c Piano type 5 pins 5/6 amps socket outlet 10 Nos 51.66 516.60
d 3 pins flush type 15/16 amps socket outlet 5 Nos 76.56 382.80
e 3 pins 5/6 amps ISI marked polycarbomate unbreakable plug top
10 Nos 57.79 577.90
f 3 pins 15/16 amps ISI marked polycarbomate unbreakable plug top
5 Nos 69.99 349.95
g Hanging bed/cord/bell push switch 2 Nos 56.35 112.70
h Dimmer 400 W / Fan Regulator 2 Nos 300.00 600.00
i Mini Kit Kat Fuse Flush 10 amps 5 Nos 50.29 251.45
j Mini Kit kat fuse flush 16 amps 2 Nos 54.04 108.08
k Mini Kit Kat Fush Flush Knob Only 2 Nos 43.72 87.44
l Mini Buzzer Switch Type 2 Nos 69.05 138.10
m Delux Musical bell 2 Nos 210.74 421.48
6 Supply & Fixing of Misc Fixtures Including Perpex Sheet
Supplying and fixing below given (nominal size) metal boxes on surface or in recess with suitable size phenolic laminated sheet cover in the front including providing and fixing of 3 pin 5/6 amps socket outlet and 5/6 amps piano type switches of Anchor or approved make, connections, painting etc as required as per the directions of the Engineer-in-Charge.
a Metal Box light plug of 150mm x 75mm x 60mm with 3 pin 5/6 amps switch socket
1 nos 213.92 213.92
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 54 of 87
b Metal Box light plug of 180mm x 100mm x 60mm with 3 pin 5/6 amps switch socket
1 nos 249.91 249.91
c Metal Box light plug of 150mm x 75mm x 60mm with 3 pin 15/16 amps switch socket
1 nos 314.06 314.06
7 Supply & Fixing of Misc. Mosaic Wiring Accessories
Supply, fixing & connection of 250V below given mosaic wiring accessories of MDS or approved equivalent including supplying and fixing of nuts, bolts, complete with labor and materials as per direction of EIC
a 6 amps - 1 way - SP - 1 module switches 20 nos 119.26 2385.20
b 6 amps - 2 way - SP - 1 module switches 5 nos 128.93 644.65
c 10 amps - 1 way - SP - 2 module switches 10 nos 142.12 1421.20
d 10 amps - 2 way - SP - 2 module switches 5 nos 157.08 785.40
e 16 amps - 1 way - SP - 1 module switches 5 nos 164.12 820.60
f 16 amps - 2 way - SP - 1 module switches 5 nos 182.60 913.00
g 6 amps - 1 way - SP - 1 module Push Button 5 nos 135.97 679.85
h 6 amps - 1 way - SP - 1 module Bell push 5 nos 139.49 697.45
k 16 amps - 3 pin - 3 module switch socket 5 nos 533.17 2665.85
l 2 pins - 1 module telephone socket 5 nos 130.60 653.00
m 2 pin telephone plug 5 nos 97.26 486.30
n RJ 11 telephone socket 1 module 5 nos 122.78 613.90
o RJ 45 Category 6 UTP - 1 module information outlet
2 nos 348.85 697.70
p RJ 45 Category 6 UTP - 2 module information outlet
2 nos 353.25 706.50
q 1 module blanking plate 5 nos 34.34 171.70
r 1 module - 8 mm cable outlet 5 nos 90.65 453.25
8 Supply & Fixing of White colour plate with frame for mosaic accessories
Supply & fixing of below mentioned white cover plate with frame for mosaic accessories of MDS or equivalent approved make including supply & fixing of nuts, bolts etc complete with labour, materials as per the directions of the Engineer in Charge
a 1 module 2 nos 127.00 254.00
b 2 module 2 nos 138.00 276.00
c 3 module 2 nos 160.00 320.00
d 4 module 2 nos 184.00 368.00
e 6 module 2 nos 230.00 460.00
f 8 module 2 nos 252.00 504.00
g 12 module 2 nos 290.00 580.00
h 18 module 2 nos 380.00 760.00
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 55 of 87
9 Supply & Fixing of metal flush boxes for mosaic accessories
Supply & fixing of below mentioned metal flush boxes to accommodate mosiac wiring accessories of MDS or equivalent approved make including supply & fixing of nuts & bolts etc complete with labour & materials as per the directions of the Engineer-in-Charge
a 1 / 2 module 2 nos 69.11 138.22
b 3 module 2 nos 73.30 146.60
c 4 module 2 nos 83.18 166.36
d 6 / 8 module 2 nos 115.74 231.48
e 12 module 2 nos 177.31 354.62
f 18 module 2 nos 215.14 430.28
10 Supply & Fixing of metal surface boxes for mosaic accessories
Supply & fixing of below mentioned metal serface boxes to accommodate mosiac wiring accessories of MDS or equivalent approved make including supply & fixing of nuts & bolts etc complete with labour & materials as per the directions of the Engineer-in-Charge
a 1 / 2 module 2 nos 113.78 227.56
b 3 module 2 nos 123.54 247.08
c 4 module 2 nos 134.30 268.60
d 6 / 8 module 2 nos 179.25 358.50
e 12 module 2 nos 286.39 572.78
f 18 module 2 nos 298.71 597.42
11 Supply & Installation of Industrial Type Plugs/Sockets
Supply, fixing and connection of following industrial type plugs/socket (confirming to IS/IEC-309) of L&T/GEC/Alstom/Anchor/Schneider/MDS or approved equivalent in distribution board etc all complete with labour and material as per direction of EIC
a PLUG- 2 pole + Earth, 250V - 20 amps 2 Nos 100.27 200.54
b SOCKET- 2 pole + Earth, 250V - 20 amps 2 Nos 113.13 226.26
12
Supply & fixing of Sunmica/Hylem Sheet cover of required cutout for mounting on boards, DBs similar types of electrical installations or wherever required as per direction of EIC. Job shall include the finishing and mounting of the cutout sheet along with the supply of necessary hardwares, screws etc, all complete with labour & material . Minimum thickness of the hylem sheet shall be 2 mm
20 m2 178.23 3564.60
13 SFI of GI Cable Tray
Supply, fabrication, Installation of following sizes of perforated GI Cable trays including horizontal & vertical bends, reducers as required, tees, cross members, other accessories as required and duly suspended from the ceiling/or fix to RCC or steel column, beams or any other structure members with MS suspenders, angles, channels etc complete with labour & materials as per drawings and instructions of Engineer-in-Charge. (All hardwares and fittings shall be minimum of Chromium or Cadmium plated, or Zinc passivated).
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 56 of 87
a 150mm x 100mm x 2mm 10 mtr 665.76 6657.60
b 300mm x 100mm x 2mm 10 mtr 906.26 9062.60
c 450mm x 100mm x 2mm 10 mtr 1146.77 11467.70
d 600mm x 100mm x 2mm 10 mtr 1385.94 13859.40
e 150mm x 50mm x 2mm 10 mtr 506.74 5067.40
f 300mm x 50mm x 2mm 10 mtr 745.93 7459.30
g 450mm x 50mm x 2mm 10 mtr 986.44 9864.40
h 600mm x 50mm x 2mm 10 mtr 1225.61 12256.10
i 100mm x 25mm x 2mm 10 mtr 338.71 3387.10
j 150mm x 25mm x 2mm 10 mtr 418.80 4188.00
k 200mm x 25mm x 2mm 10 mtr 499.05 4990.50
l 300mm x 25mm x 2mm 10 mtr 658.05 6580.50
m 450mm x 25mm x 2mm 10 mtr 898.56 8985.60
n 600mm x 25mm x 2mm 10 mtr 1146.77 11467.70
14 MS/GI/AL Cable Tray (Excluding supply)
Fabrication, Installation of following sizes of perforated GI Cable trays including horizontal & vertical bends, reducers as required, tees, cross members, other accessories as required and duly suspended from the ceiling/or fix to RCC or steel column, beams or any other structure members with MS suspenders, angles, channels etc complete with labour & materials as per drawings and instructions of Engineer-in-Charge. (All hardwares and fittings shall be minimum of Chromium or Cadmium plated, or Zinc passivated). Note: Supports, angles, channels etc shall be paid separately under respective items. Cable tray will be supplied by the owner free of cost.
a 150mm x 100mm x 2mm 10 mtr 140.40 1404.00
b 300mm x 100mm x 2mm 10 mtr 141.09 1410.90
c 450mm x 100mm x 2mm 10 mtr 142.22 1422.20
d 600mm x 100mm x 2mm 10 mtr 143.48 1434.80
e 150mm x 50mm x 2mm 10 mtr 135.05 1350.50
f 300mm x 50mm x 2mm 10 mtr 138.85 1388.50
g 450mm x 50mm x 2mm 10 mtr 139.55 1395.50
h 600mm x 50mm x 2mm 10 mtr 140.25 1402.50
i 100mm x 25mm x 2mm 10 mtr 123.42 1234.20
j 150mm x 25mm x 2mm 10 mtr 124.82 1248.20
k 200mm x 25mm x 2mm 10 mtr 125.52 1255.20
l 300mm x 25mm x 2mm 10 mtr 125.94 1259.40
m 450mm x 25mm x 2mm 10 mtr 126.21 1262.10
n 600mm x 25mm x 2mm 10 mtr 131.14 1311.40
15 Supply & Installation of GI Pipe
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 57 of 87
Providing & laying medium quality, class-B galvanised steel pipes of TATA/JINDAL make or equivalent approved make confirming to IS:1239(Part-I) in underground trenches, on steel, supply & installation of supports, clamps, seats, plugs, bsh, fittings/fixtures like bends, tees, nipples, reducers etc al complete as per specification , drawing and direction of Engineer-in-Charge. Job shall include sealing of pipe ends and joint with bushes and bitumen based fillings and such other miscellaneous works so as to make piping watertight. NOTE: Supply og GI pipe is included in contractor scope of supply
a 25mm dia 5 mtr 162.38 811.90
b 40 mm dia 5 mtr 231.38 1156.90
c 65 mm dia 5 mtr 367.35 1836.75
d 100 mm dia 5 mtr 666.16 3330.80
e 150 mm dia 5 mtr 1072.16 5360.80
16 Installation of GI Pipe
Laying galvanised steel pipes as supplied by owner in underground trenches, on steel, supply & installation of supports, clamps, seats, plugs, bsh, fittings/fixtures like bends, tees, nipples, reducers etc al complete as per specification , drawing and direction of Engineer-in-Charge. Job shall include sealing of pipe ends and joint with bushes and bitumen based fillings and such other miscellaneous works so as to make piping watertight. Note: Only GI Pipes will be supplied by the owner free of cost. The item shall include transportation of pipes from owner store/issue point to the site, returning unused pipes to the stores as per the direction of the engineer-in-charge.
a 25mm dia 5 mtr 48.71 243.55
b 40 mm dia 5 mtr 69.40 347.00
c 65 mm dia 5 mtr 110.20 551.00
d 100 mm dia 5 mtr 199.85 999.25
e 150 mm dia 5 mtr 321.65 1608.25
TOTAL 2,21,498.89
Sn Description Qty Unit Rate Total Amount
D CABLE GLANDING, TERMINATION & JOINTING JOB
1 LT cable End Termination with Single Compression Weather Proof Gland
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 58 of 87
LT cable end termination for armoured XLPE aluminium cable with Single Compression weather proof brass glanding (including gland & lugs supply) providing end termination of power/control cable including cutting, stripping, providing & fixing heavy duty type lugs, cable insulation, providing & glanding single heavy duty brass cable gland (Dowells or equivalent approved make) confirming to IS-12943, wherever specified, providing heavy duty type aluminium type lug for power cables & copper lugs for control cables, crimping, restoration of insulation/clamping of cable as required, tagging with aluminium tag, earthing of armour, connection to the equipment terminals etc, all complete with labour and materials as per the standard and direction of Engineer-in-Charge. NOTE: Supply of Glands & Lugs is in Contractor Scope of Supply.
a 2*6 sq.mm 1 Nos 193.23 193.23
b 3*4 sq.mm 1 Nos 194.19 194.19
c 3*6 sq.mm 1 Nos 196.23 196.23
d 3*10 sq.mm 1 Nos 205.49 205.49
e 3*16 sq.mm 1 Nos 244.45 244.45
f 3*25 sq.mm 1 Nos 246.77 246.77
g 3*35 sq.mm 1 Nos 249.64 249.64
h 3*50 sq.mm 1 Nos 255.78 255.78
i 3*70 sq.mm 1 Nos 389.67 389.67
j 3*95 sq.mm 1 Nos 392.49 392.49
k 3*120 sq.mm 1 Nos 657.92 657.92
l 3*150 sq.mm 1 Nos 670.23 670.23
m 3*185 sq.mm 1 Nos 726.49 726.49
n 3*225 sq.mm 1 Nos 913.33 913.33
o 3*240 sq.mm 1 Nos 934.34 934.34
p 3*300 sq.mm 1 Nos 1133.26 1133.26
q 4*4 sq.mm 1 Nos 195.51 195.51
r 4*6 sq.mm 1 Nos 196.19 196.19
s 4*10 sq.mm 1 Nos 198.21 198.21
t 4*16 sq.mm 1 Nos 247.33 247.33
u 4*25 sq.mm 1 Nos 249.78 249.78
v 4*35 sq.mm 1 Nos 256.60 256.60
w 4*50 sq.mm 1 Nos 349.67 349.67
x 3*2.5 sq.mm LT control cables with copper lugs
1 Nos 167.67 167.67
y 5*2.5 sq.mm LT control cables with copper lugs
1 Nos 177.30 177.30
z 7*2.5 sq.mm LT control cables with copper lugs
1 Nos 205.44 205.44
aa 10*2.5 sq.mm LT control cables with copper lugs
1 Nos 219.88 219.88
ab 12*2.5 sq.mm LT control cables with copper lugs
1 Nos 229.51 229.51
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 59 of 87
ac 14*2.5 sq.mm LT control cables with copper lugs
1 Nos 309.78 309.78
ad 16*2.5 sq.mm LT control cables with copper lugs
1 Nos 319.48 319.48
ae 19*2.5 sq.mm LT control cables with copper lugs
1 Nos 333.85 333.85
af 21*2.5 sq.mm LT control cables with copper lugs
1 Nos 469.32 469.32
ag 24*2.5 sq.mm LT control cables with copper lugs
1 Nos 488.80 488.80
ah 27*2.5 sq.mm LT control cables with copper lugs
1 Nos 553.76 553.76
ai 30*2.5 sq.mm LT control cables with copper lugs
1 Nos 572.88 572.88
aj 3-1/2 * 25 sq.mm 1 Nos 289.93 289.93
ak 3-1/2 * 35 sq.mm 1 Nos 325.68 325.68
al 3-1/2 * 50 sq.mm 1 Nos 470.92 470.92
am 3-1/2 * 70 sq.mm 1 Nos 542.27 542.27
an 3-1/2 * 95 sq.mm 1 Nos 715.78 715.78
ao 3-1/2 * 120 sq.mm 1 Nos 896.30 896.30
ap 3-1/2 * 150 sq.mm 1 Nos 1101.53 1101.53
aq 3-1/2 * 185 sq.mm 1 Nos 1145.80 1145.80
ar 3-1/2 * 225 sq.mm 1 Nos 1308.62 1308.62
as 3-1/2 * 240 sq.mm 1 Nos 1333.02 1333.02
at 3-1/2 * 300 sq.mm 1 Nos 1808.28 1808.28
au 1 * 300 sq.mm 1 Nos 889.81 889.81
2 LT cable End Termination with Double Compression Flame Proof Gland
LT cable end termination for armoured XLPE aluminium cable with Double Compression weather proof brass glanding (including gland & lugs supply) providing end termination of power/control cable including cutting, stripping, providing & fixing heavy duty type lugs, cable insulation, providing & glanding single heavy duty brass cable gland (Dowells or equivalent approved make) confirming to IS-12943, wherever specified, providing heavy duty type aluminium type lug for power cables & copper lugs for control cables, crimping, restoration of insulation/clamping of cable as required, tagging with aluminium tag, earthing of armour, connection to the equipment terminals etc, all complete with labour and materials as per the standard and direction of Engineer-in-Charge. NOTE: Supply of Glands & Lugs is in Contractor Scope of Supply.
a 2*6 sq.mm 1 Nos 303.21 303.21
b 2*10 sq.mm 1 Nos 373.19 373.19
c 2*25 sq.mm 1 Nos 482.89 482.89
d 3*4 sq.mm 1 Nos 365.29 365.29
e 3*6 sq.mm 1 Nos 436.28 436.28
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 60 of 87
f 3*10 sq.mm 1 Nos 445.47 445.47
g 3*16 sq.mm 1 Nos 546.99 546.99
h 3*25 sq.mm 1 Nos 547.83 547.83
i 3*35 sq.mm 1 Nos 549.86 549.86
j 3*50 sq.mm 1 Nos 601.04 601.04
k 3*70 sq.mm 1 Nos 860.42 860.42
l 3*95 sq.mm 1 Nos 1065.92 1065.92
m 3*120 sq.mm 1 Nos 1280.05 1280.05
n 3*150 sq.mm 1 Nos 1382.83 1382.83
o 3*185 sq.mm 1 Nos 1514.16 1514.16
p 3*225 sq.mm 1 Nos 1876.77 1876.77
q 3*240 sq.mm 1 Nos 1897.69 1897.69
r 3*300 sq.mm 1 Nos 2290.95 2290.95
s 4*4 sq.mm 1 Nos 483.71 483.71
t 4*6 sq.mm 1 Nos 484.38 484.38
u 4*10 sq.mm 1 Nos 522.30 522.30
v 4*16 sq.mm 1 Nos 595.66 595.66
w 4*25 sq.mm 1 Nos 598.13 598.13
x 4*35 sq.mm 1 Nos 647.00 647.00
y 4*50 sq.mm 1 Nos 844.49 844.49
z 3*2.5 sq.mm LT control cables with copper lugs
1 Nos 393.48 393.48
aa 5*2.5 sq.mm LT control cables with copper lugs
1 Nos 479.08 479.08
ab 7*2.5 sq.mm LT control cables with copper lugs
1 Nos 528.18 528.18
ac 10*2.5 sq.mm LT control cables with copper lugs
1 Nos 542.63 542.63
ad 12*2.5 sq.mm LT control cables with copper lugs
1 Nos 552.25 552.25
ae 14*2.5 sq.mm LT control cables with copper lugs
1 Nos 688.98 688.98
af 16*2.5 sq.mm LT control cables with copper lugs
1 Nos 698.61 698.61
ag 19*2.5 sq.mm LT control cables with copper lugs
1 Nos 713.05 713.05
ah 3-1/2 * 25 sq.mm 1 Nos 689.20 689.20
ai 3-1/2 * 35 sq.mm 1 Nos 783.88 783.88
aj 3-1/2 * 50 sq.mm 1 Nos 980.34 980.34
ak 3-1/2 * 70 sq.mm 1 Nos 1193.50 1193.50
al 3-1/2 * 95 sq.mm 1 Nos 1400.39 1400.39
am 3-1/2 * 120 sq.mm 1 Nos 1643.22 1643.22
an 3-1/2 * 150 sq.mm 1 Nos 1914.67 1914.67
ao 3-1/2 * 185 sq.mm 1 Nos 1930.43 1930.43
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 61 of 87
ap 3-1/2 * 225 sq.mm 1 Nos 2436.37 2436.37
aq 3-1/2 * 240 sq.mm 1 Nos 2460.77 2460.77
ar 3-1/2 * 300 sq.mm 1 Nos 2924.30 2924.30
3 LT cable End Termination (Excluding Supply of SC Gland)
LT cable end termination for armoured XLPE/PVC aluminium cable with Single Compression weather proof brass glanding (excluding gland & lugs supply) providing end termination of power/control cable including cutting, stripping, providing & fixing heavy duty type lugs, cable insulation, providing & glanding single heavy duty brass cable gland (Dowells or equivalent approved make), wherever required, providing heavy duty type aluminium lug for power cables & copper lugs for control cables, crimping, restoration of insulation/clamping of cable as required, tagging with aluminium tag, earthing of armour, connection to the equipment terminals etc, all complete with labour and materials(excluding gland & lugs supply) as per the standard and direction of Engineer-in-Charge. NOTE: Supply of Glands & Lugs is in OMPL Scope of Supply.
a 2*6 sq.mm 1 Nos 52.94 52.94
b 3*4 sq.mm 1 Nos 76.22 76.22
c 3*6 sq.mm 1 Nos 79.19 79.19
d 3*10 sq.mm 1 Nos 82.17 82.17
e 3*16 sq.mm 1 Nos 85.14 85.14
f 3*25 sq.mm 1 Nos 88.12 88.12
g 3*35 sq.mm 1 Nos 91.09 91.09
h 3*50 sq.mm 1 Nos 94.07 94.07
i 3*70 sq.mm 1 Nos 98.99 98.99
j 3*95 sq.mm 1 Nos 101.97 101.97
k 3*120 sq.mm 1 Nos 145.18 145.18
l 3*150 sq.mm 1 Nos 148.10 148.10
m 3*185 sq.mm 1 Nos 151.13 151.13
n 3*225 sq.mm 1 Nos 154.11 154.11
o 3*240 sq.mm 1 Nos 157.08 157.08
p 3*300 sq.mm 1 Nos 197.98 197.98
q 4*4 sq.mm 1 Nos 79.19 79.19
r 4*6 sq.mm 1 Nos 79.49 79.49
s 4*10 sq.mm 1 Nos 79.78 79.78
t 4*16 sq.mm 1 Nos 80.09 80.09
u 4*25 sq.mm 1 Nos 131.99 131.99
v 4*35 sq.mm 1 Nos 137.94 137.94
w 4*50 sq.mm 1 Nos 143.89 143.89
x 3*2.5 sq.mm LT control cables with copper lugs
1 Nos 79.19 79.19
y 5*2.5 sq.mm LT control cables with copper lugs
1 Nos 79.78 79.78
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 62 of 87
z 7*2.5 sq.mm LT control cables with copper lugs
1 Nos 118.78 118.78
aa 10*2.5 sq.mm LT control cables with copper lugs
1 Nos 120.27 120.27
ab 12*2.5 sq.mm LT control cables with copper lugs
1 Nos 145.18 145.18
ac 14*2.5 sq.mm LT control cables with copper lugs
1 Nos 148.08 148.08
ad 16*2.5 sq.mm LT control cables with copper lugs
1 Nos 158.39 158.39
ae 19*2.5 sq.mm LT control cables with copper lugs
1 Nos 161.29 161.29
af 21*2.5 sq.mm LT control cables with copper lugs
1 Nos 150.61 150.61
ag 24*2.5 sq.mm LT control cables with copper lugs
1 Nos 150.61 150.61
ah 27*2.5 sq.mm LT control cables with copper lugs
1 Nos 158.00 158.00
ai 30*2.5 sq.mm LT control cables with copper lugs
1 Nos 158.00 158.00
aj 3-1/2 * 25 sq.mm 1 Nos 131.99 131.99
ak 3-1/2 * 35 sq.mm 1 Nos 164.98 164.98
al 3-1/2 * 50 sq.mm 1 Nos 230.99 230.99
am 3-1/2 * 70 sq.mm 1 Nos 233.96 233.96
an 3-1/2 * 95 sq.mm 1 Nos 329.97 329.97
ao 3-1/2 * 120 sq.mm 1 Nos 395.90 395.90
ap 3-1/2 * 150 sq.mm 1 Nos 527.96 527.96
aq 3-1/2 * 185 sq.mm 1 Nos 542.85 542.85
ar 3-1/2 * 225 sq.mm 1 Nos 659.95 659.95
as 3-1/2 * 240 sq.mm 1 Nos 689.70 689.70
at 3-1/2 * 300 sq.mm 1 Nos 732.44 732.44
au 1 * 300 sq.mm 1 Nos 472.16 472.16
4 LT cable End Termination(Excluding Supply of DC Flame Proof Gland)
LT cable end termination for armoured XLPE/PVC aluminium cable with Double Compression brass glanding (excluding gland & lugs supply) providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF type brass cable gland, wherever required, providing heavy duty type aluminium lug for power cables & copper lugs for control cables, crimping, restoration of insulation/clamping of cable as required, tagging with aluminium tag, earthing of armour, connection to the equipment terminals etc, all complete with labour and materials (excluding gland & lugs supply) as per the standard and direction of Engineer-in-Charge. NOTE: Supply of Glands & Lugs is in OMPL Scope of Supply.
a 2*6 sq.mm 1 Nos 80.57 80.57
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 63 of 87
b 2*10 sq.mm 1 Nos 80.57 80.57
c 2*25 sq.mm 1 Nos 86.50 86.50
d 3*4 sq.mm 1 Nos 116.30 116.30
e 3*6 sq.mm 1 Nos 119.36 119.36
f 3*10 sq.mm 1 Nos 122.33 122.33
g 3*16 sq.mm 1 Nos 125.31 125.31
h 3*25 sq.mm 1 Nos 128.28 128.28
i 3*35 sq.mm 1 Nos 129.77 129.77
j 3*50 sq.mm 1 Nos 130.67 130.67
k 3*70 sq.mm 1 Nos 152.21 152.21
l 3*95 sq.mm 1 Nos 153.69 153.69
m 3*120 sq.mm 1 Nos 253.63 253.63
n 3*150 sq.mm 1 Nos 254.52 254.52
o 3*185 sq.mm 1 Nos 255.12 255.12
p 3*225 sq.mm 1 Nos 255.70 255.70
q 3*240 sq.mm 1 Nos 256.61 256.61
r 3*300 sq.mm 1 Nos 290.97 290.97
s 4*4 sq.mm 1 Nos 117.87 117.87
t 4*6 sq.mm 1 Nos 118.47 118.47
u 4*10 sq.mm 1 Nos 119.36 119.36
v 4*16 sq.mm 1 Nos 120.55 120.55
w 4*25 sq.mm 1 Nos 153.40 153.40
x 4*35 sq.mm 1 Nos 154.59 154.59
y 4*50 sq.mm 1 Nos 155.18 155.18
z 3*2.5 sq.mm LT control cables with copper lugs
1 Nos 109.86 109.86
aa 5*2.5 sq.mm LT control cables with copper lugs
1 Nos 111.67 111.67
ab 7*2.5 sq.mm LT control cables with copper lugs
1 Nos 126.80 126.80
ac 10*2.5 sq.mm LT control cables with copper lugs
1 Nos 134.77 134.77
ad 12*2.5 sq.mm LT control cables with copper lugs
1 Nos 139.23 139.23
ae 14*2.5 sq.mm LT control cables with copper lugs
1 Nos 141.04 141.04
af 16*2.5 sq.mm LT control cables with copper lugs
1 Nos 146.49 146.49
ag 19*2.5 sq.mm LT control cables with copper lugs
1 Nos 153.03 153.03
ah 3-1/2 * 25 sq.mm 1 Nos 131.99 131.99
ai 3-1/2 * 35 sq.mm 1 Nos 157.55 157.55
aj 3-1/2 * 50 sq.mm 1 Nos 201.22 201.22
ak 3-1/2 * 70 sq.mm 1 Nos 234.22 234.22
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 64 of 87
al 3-1/2 * 95 sq.mm 1 Nos 300.22 300.22
am 3-1/2 * 120 sq.mm 1 Nos 366.21 366.21
an 3-1/2 * 150 sq.mm 1 Nos 524.39 524.39
ao 3-1/2 * 185 sq.mm 1 Nos 527.96 527.96
ap 3-1/2 * 225 sq.mm 1 Nos 659.95 659.95
aq 3-1/2 * 240 sq.mm 1 Nos 689.71 689.71
ar 3-1/2 * 300 sq.mm 1 Nos 791.95 791.95
5 LT Straight through Joint - Heat Shrinkable
LT straight through joint for armoured XLPEinsulated cable including supply of heat shrinkable TUBULAR straight through joint kit of Raychem/approved equivalent of heat shrinkable joint, making straight through joint for medium voltage armoured power & control cable upto 1.1kV grade including cutting, stripping of cable insulation, ferrules, all complete with labour & materials as per drawings, specification & direction of Engineer-in-Charge. NOTE: Supply of Heat Shrinakble Joint Kit is in contractor Scope of Supply.
a upto 3 / 3.5 / 4 x 6 sq.mm 1 Nos 1163.66 1163.66
b 3 / 3.5 / 4 x 10 sq.mm 1 Nos 1786.15 1786.15
c 3 / 3.5 / 4 x 16 sq.mm 1 Nos 1786.15 1786.15
d 3 / 3.5 / 4 x 25 sq.mm 1 Nos 2994.51 2994.51
e 3 / 3.5 / 4 x 35 sq.mm 1 Nos 2994.51 2994.51
f 3 / 3.5 / 4 x 50 sq.mm 1 Nos 3225.94 3225.94
g 3 / 3.5 / 4 x 70 sq.mm 1 Nos 4629.60 4629.60
h 3 / 3.5 / 4 x 95 sq.mm 1 Nos 4768.46 4768.46
i 3 / 3.5 / 4 x 120 sq.mm 1 Nos 4776.83 4776.83
j 3 / 3.5 / 4 x 150 sq.mm 1 Nos 4785.20 4785.20
k 3 / 3.5 / 4 x 185 sq.mm 1 Nos 8186.06 8186.06
l 3 / 3.5 / 4 x 225 sq.mm 1 Nos 8371.20 8371.20
m 3 / 3.5 / 4 x 240 sq.mm 1 Nos 8421.94 8421.94
n 3 / 3.5 / 4 x 300 sq.mm 1 Nos 8437.16 8437.16
6 LT Straight through Joint - Heat Shrinkable (Excluding Supply)
LT straight through joint for armoured XLPEinsulated cable excluding supply of heat shrinkable TUBULAR straight through joint kit, making straight through joint for medium voltage armoured power & control cable upto 1.1kV grade including cutting, stripping of cable insulation, ferrules, all complete with labour including travel, transportation, borading, lodging of the cable jointer & materials as per drawings, specification & direction of Engineer-in-Charge. NOTE: Supply of straight through joint kit shall be in OMPL scope.
a upto 3 / 3.5 / 4 x 6 sq.mm 1 Nos 370.29 370.29
b 3 / 3.5 / 4 x 10 sq.mm 1 Nos 378.65 378.65
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 65 of 87
c 3 / 3.5 / 4 x 16 sq.mm 1 Nos 387.02 387.02
d 3 / 3.5 / 4 x 25 sq.mm 1 Nos 395.38 395.38
e 3 / 3.5 / 4 x 35 sq.mm 1 Nos 403.76 403.76
f 3 / 3.5 / 4 x 50 sq.mm 1 Nos 536.91 536.91
g 3 / 3.5 / 4 x 70 sq.mm 1 Nos 545.28 545.28
h 3 / 3.5 / 4 x 95 sq.mm 1 Nos 627.13 627.13
i 3 / 3.5 / 4 x 120 sq.mm 1 Nos 635.45 635.45
j 3 / 3.5 / 4 x 150 sq.mm 1 Nos 643.82 643.82
k 3 / 3.5 / 4 x 185 sq.mm 1 Nos 648.01 648.01
l 3 / 3.5 / 4 x 225 sq.mm 1 Nos 786.86 786.86
m 3 / 3.5 / 4 x 240 sq.mm 1 Nos 795.23 795.23
n 3 / 3.5 / 4 x 300 sq.mm 1 Nos 803.60 803.60
7 LT Straight through Joint - Cast Resin Type
LT straight through joint for armoured XLPE insulated cable including supply of cast resin type straight through joint kit of Mahindra/CCI/Raychem/approved equivalent, making straight through joint for medium voltage armoured power & control cable upto 1.1kV grade including cutting, stripping of cable insulation, ferrules, all complete with labour & materials as per drawings, specification & direction of Engineer-in-Charge. NOTE: Supply of Cast Resin Joint Kit is in contractor Scope of Supply.
a upto 3 x 10 sq.mm 1 Nos 952.39 952.39
b 3 x 16 sq.mm 1 Nos 1038.33 1038.33
c 3 x 25 sq.mm 1 Nos 1040.08 1040.08
d 3 x 35 sq.mm 1 Nos 1152.32 1152.32
e 3 x 50 sq.mm 1 Nos 1304.46 1304.46
f 3 x 70 sq.mm 1 Nos 1404.08 1404.08
g 3 x 95 sq.mm 1 Nos 1705.48 1705.48
h 3 x 120 sq.mm 1 Nos 1730.38 1730.38
i 3 x 150 sq.mm 1 Nos 1744.70 1744.70
j 3 x 185 sq.mm 1 Nos 2309.77 2309.77
k 3 x 225 sq.mm 1 Nos 2588.59 2588.59
l 3 x 240 sq.mm 1 Nos 2627.60 2627.60
m 3 x 300 sq.mm 1 Nos 3088.73 3088.73
n upto 3.5 x 6 sq.mm 1 Nos 1229.84 1229.84
o 3.5 x 10 sq.mm 1 Nos 1500.36 1500.36
p 3.5 x 16 sq.mm 1 Nos 1502.10 1502.10
q 3.5 x 25 sq.mm 1 Nos 1614.97 1614.97
r 3.5 x 35 sq.mm 1 Nos 1616.62 1616.62
s 3.5 x 50 sq.mm 1 Nos 1803.62 1803.62
t 3.5 x 70 sq.mm 1 Nos 1984.04 1984.04
u 3.5 x 95 sq.mm 1 Nos 2003.26 2003.26
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 66 of 87
v 3.5 x 120 sq.mm 1 Nos 2938.33 2938.33
w 3.5 x 150 sq.mm 1 Nos 2955.05 2955.05
x 3.5 x 185 sq.mm 1 Nos 3036.34 3036.34
y 3.5 x 225 sq.mm 1 Nos 3184.53 3184.53
z 3.5 x 240 sq.mm 1 Nos 3616.25 3616.25
aa 3.5 x 300 sq.mm 1 Nos 4021.38 4021.38
ab upto 4 x 6 sq.mm 1 Nos 1230.37 1230.37
ac 4 x 10 sq.mm 1 Nos 1501.01 1501.01
ad 4 x 16 sq.mm 1 Nos 1503.00 1503.00
ae 4 x 25 sq.mm 1 Nos 1616.17 1616.17
af 4 x 35 sq.mm 1 Nos 1618.05 1618.05
ag 4 x 50 sq.mm 1 Nos 1805.71 1805.71
ah 4 x 70 sq.mm 1 Nos 1987.80 1987.80
ai 4 x 95 sq.mm 1 Nos 2007.50 2007.50
aj 4 x 120 sq.mm 1 Nos 2944.07 2944.07
ak 4 x 150 sq.mm 1 Nos 2963.18 2963.18
al 4 x 185 sq.mm 1 Nos 3046.28 3046.28
am 4 x 225 sq.mm 1 Nos 3198.60 3198.60
an 4 x 240 sq.mm 1 Nos 3632.48 3632.48
ao 4 x 300 sq.mm 1 Nos 4044.96 4044.96
8 LT Straight through Joint - Cast Resin Type (Excluding Supply)
LT straight through joint for armoured XLPE insulated cable including supply of cast resin type straight through joint kit of Mahindra/CCI/Raychem/approved equivalent, making straight through joint for medium voltage armoured power & control cable upto 1.1kV grade including cutting, stripping of cable insulation, ferrules, all complete with labour & materials as per drawings, specification & direction of Engineer-in-Charge. NOTE: Supply of Cast Resin Joint Kit is in OMPL Scope of Supply.
a upto 3 / 3.5 / 4 x 6 sq.mm 1 Nos 462.85 462.85
b 3 / 3.5 / 4 x 10 sq.mm 1 Nos 475.41 475.41
c 3 / 3.5 / 4 x 16 sq.mm 1 Nos 483.77 483.77
d 3 / 3.5 / 4 x 25 sq.mm 1 Nos 492.15 492.15
e 3 / 3.5 / 4 x 35 sq.mm 1 Nos 610.97 610.97
f 3 / 3.5 / 4 x 50 sq.mm 1 Nos 627.71 627.71
g 3 / 3.5 / 4 x 70 sq.mm 1 Nos 740.57 740.57
h 3 / 3.5 / 4 x 95 sq.mm 1 Nos 748.94 748.94
i 3 / 3.5 / 4 x 120 sq.mm 1 Nos 757.31 757.31
j 3 / 3.5 / 4 x 150 sq.mm 1 Nos 755.80 755.80
k 3 / 3.5 / 4 x 185 sq.mm 1 Nos 925.72 925.72
l 3 / 3.5 / 4 x 225 sq.mm 1 Nos 976.46 976.46
m 3 / 3.5 / 4 x 240 sq.mm 1 Nos 986.61 986.61
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 67 of 87
n 3 / 3.5 / 4 x 300 sq.mm 1 Nos 996.75 996.75
9 11kV (E) / 6.6kV (UE) - Heat Shrinkable Joint
11kV ( E)/6.6kV (UE) Heat Shrinkable Straight through PVC/XLPE cable jointing including supply of the jointing kit of Raychem/approved equivalent make, making the joint for power armoured cable of the following sizes including cutting, stripping of cable insulation as per the standards and specification all complete with labour including travel, transportation, boarding, lodging of the cable jointer and material as per the direction of EIC. Cable jointer shall possess valid certificate for HT jointing. NOTE: Supply of Glands & Lugs is in Contractor Scope of Supply.
a 3*95 sq.mm 1 Nos 25487.01 25487.01
b 3*120 sq.mm 1 Nos 31065.88 31065.88
c 3*150 sq.mm 1 Nos 31149.55 31149.55
d 3*185 sq.mm 1 Nos 31191.39 31191.39
e 3*240 sq.mm 1 Nos 33592.41 33592.41
f 3*300 sq.mm 1 Nos 33684.45 33684.45
g 1*300 sq.mm 1 Nos 14119.29 14119.29
h 1*630 sq.mm 1 Nos 18825.10 18825.10
8 33kV (E) / 22kV (UE) - Heat Shrinkable Joint
33kV ( E)/22kV (UE) Heat Shrinkable Straight through PVC/XLPE cable jointing including supply of the jointing kit of Raychem/approved equivalent make, making the joint for power armoured cable of the following sizes including cutting, stripping of cable insulation as per the standards and specification all complete with labour including travel, transportation, borading, lodging of the cable jointer and material as per the direction of EIC. Cable jointer shall possess valid certificate for HT jointing. NOTE: Supply of Glands & Lugs is in Contractor Scope of Supply.
11kV ( E)/6.6kV (UE) Heat Shrinkable Straight through PVC/XLPE cable jointing, making the joint for power armoured cable of the following sizes including cutting, stripping of cable insulation as per the standards and specification all complete with labour including travel, transportation, borading, lodging of the cable jointer and material as per the direction of EIC. Cable jointer shall possess valid certificate for HT jointing. NOTE: Supply of Glands & Lugs is in OMPL Scope of Supply.
a 3*95 sq.mm 1 Nos 4986.29 4986.29
b 3*120 sq.mm 1 Nos 4994.65 4994.65
c 3*150 sq.mm 1 Nos 5069.96 5069.96
d 3*185 sq.mm 1 Nos 5111.79 5111.79
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
33kV ( E)/22kV (UE) Heat Shrinkable Straight through PVC/XLPE cable jointing, making the joint for power armoured cable of the following sizes including cutting, stripping of cable insulation as per the standards and specification all complete with labour including travel, transportation, borading, lodging of the cable jointer and material as per the direction of EIC. Cable jointer shall possess valid certificate for HT jointing. NOTE: Supply of Glands & Lugs is in OMPL Scope of Supply.
a 1*300 sq.mm 1 Nos 6620.49 6620.49
b 1*630 sq.mm 1 Nos 6620.49 6620.49
9 11kV (E) / 6.6kV (UE) - End Termination Indoor Type
Supply & Installation of 11kV ( E)/6.6kV (UE) Heat Shrinkable End Termination kit Indoor Type of Raychem/approved equivalent make, making the end termination for power armoured cable of the following sizes along with supply of single/double heavy duty brass gland confirming to IS-12943 wherever required, aluminium lugs including cutting, stripping of cable insulation as per the standards and specification,clamping of cable, tagging with aluminum tag, earthing of armour, connection to equipment terminals all complete with labour including travel, transportation, borading, lodging of the cable jointer and material as per the direction of EIC. NOTE: Supply of End Termination Kit along with lugs & glands is in Contractor Scope of Supply.
a 3*95 sq. mm 1 Nos 18404.51 18404.51
b 3*120 sq.mm 1 Nos 19373.25 19373.25
c 3*150 sq.mm 1 Nos 19415.09 19415.09
d 3*185 sq.mm 1 Nos 19423.46 19423.46
e 3*240 sq.mm 1 Nos 21093.01 21093.01
f 3*300 sq.mm 1 Nos 21176.69 21176.69
g 1*300 sq. mm 1 Nos 8980.76 8980.76
h 1*630 sq. mm 1 Nos 1407.02 1407.02
10 33kV (E) / 22kV (UE) - End Termination Indoor Type
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 69 of 87
Supply & Installation of 33kV ( E)/22kV (UE) Heat Shrinkable End Termination kit Indoor Type of Raychem/approved equivalent make, making the end termination for power armoured cable of the following sizes along with supply of single/double heavy duty brass gland confirming to IS-12943 wherever required, aluminium lugs including cutting, stripping of cable insulation as per the standards and specification,clamping of cable, tagging with aluminum tag, earthing of armour, connection to equipment terminals all complete with labour including travel, transportation, borading, lodging of the cable jointer and material as per the direction of EIC. NOTE: Supply of End Termination Kit along with lugs & glands is in Contractor Scope of Supply.
a 1*300 sq.mm 1 Nos 12653.95 12653.95
b 1*630 sq.mm 1 Nos 13607.65 13607.65
9 11kV (E) / 6.6kV (UE) - End Termination Indoor Type (Excluding Supply)
Installation of 11kV ( E)/6.6kV (UE) Heat Shrinkable End Termination kit Indoor Type, making the end termination for power armoured cable of the following sizes along with supply of single/double heavy duty brass gland confirming to IS-12943 wherever required, aluminium lugs including cutting, stripping of cable insulation as per the standards and specification,clamping of cable, tagging with aluminum tag, earthing of armour, connection to equipment terminals all complete with labour including travel, transportation, borading, lodging of the cable jointer and material as per the direction of EIC. NOTE: Supply of End Termination Kit is in OMPL Scope of Supply, however contractor shall supply lugs & glands
a 3*95 sq. mm 1 Nos 5845.23 5845.23
b 3*120 sq.mm 1 Nos 5887.06 5887.06
c 3*150 sq.mm 1 Nos 5679.42 5679.42
d 3*185 sq.mm 1 Nos 5937.27 5937.27
e 3*240 sq.mm 1 Nos 5945.63 5945.63
f 3*300 sq.mm 1 Nos 6012.56 6012.56
g 1*300 sq. mm 1 Nos 4353.26 4353.26
h 1*630 sq. mm 1 Nos 4395.09 4395.09
10 33kV (E) / 22kV (UE) - End Termination Indoor Type
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 70 of 87
Installation of 33kV ( E)/22kV (UE) Heat Shrinkable End Termination kit Indoor Type, making the end termination for power armoured cable of the following sizes along with supply of single/double heavy duty brass gland confirming to IS-12943 wherever required, aluminium lugs including cutting, stripping of cable insulation as per the standards and specification,clamping of cable, tagging with aluminum tag, earthing of armour, connection to equipment terminals all complete with labour including travel, transportation, borading, lodging of the cable jointer and material as per the direction of EIC. NOTE: Supply of End Termination Kit is in OMPL Scope of Supply, however contractor shall supply lugs & glands
a 1*300 sq.mm 1 Nos 6679.06 6679.06
b 1*630 sq.mm 1 Nos 6720.89 6720.89
TOTAL 7,74,279.9
n Description Qty Unit Rate Total Amount
E EQUIPMENT MAINTENANCE
Carrying out maintenance as detailed below for the following
equipment. Job shall be carried out in the presence and as per
the guidance/supervision of OMPL Engineer/Technicians and
in accordance with Clause No. 38 & 39 of SCC. Contractor
shall provide general tools & tackles with the
technicians/helpers for the job.
1 Power Transformers (11/34.5kV,33/6.9kV of various
ratings upto 35MVA) 10 nos 2395.76 23,957.60
Job shall include unbolting of cable/bus termination
Job shall include shifting of oil filtration machine from store
to location, oil filtration of Power/Distribution transformers,
unwinding of two nos of nitrile rubber hose(30 mtrs length) to
transformer yard, connecting the same to the transformer as
per the directions, removal of the same after filtration &
rolling back the oil hose to the filtration machine, shifting of
machine back to store all complete with labour and material as
per the instruction of Engineer-in-Charge. Oil filtration
machine shall be supplied by OMPL. It shall be
responsibility of the contractor to maintain the filtration
machine in good condition for the period it is issued to them
and return it back after cleaning of the machine free of any oil
spillage, dust etc as per the instruction of the Engineer-in-
Charge.
5 Bus Duct Maintenance 20 nos 2300.44 46,008.80
Job shall include unbolting of bus duct covers at 5-6 locations,
cleaning, assistance in testing, tightness checks as per the
directions, application of HT/LT tape as per requirement &
directions (Tape shall be provided by OMPL), changing of
Silica gel (Silica Gel shall be provided by OMPL and used
silica gel shall be dried in sun and returned back), bolting
back the covers, providing any small missing/damaged
hardwares like nuts, bolts etc. all complete with labour and
material as per the instruction of Engineer-in-Charge.
6 Motor Maintenance
a HT Motor (6.6kV above 1 MW) Explosion
proof motor 5 nos 2395.76 11,978.80
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 72 of 87
Job shall include opening of cable termination
box, motor feeder back cover, cleaning,
assistance during testing, removal of earthing
points if required, tightness checks, sealing if
required, bolting back the cable termination
box & motor feeder back cover, providing
any small missing/damaged hardwares like
nuts, bolts etc, rack in-rack out the breaker,
cleaning the breaker panel, applying
jelly/grease as directed by Site
Engineer/technicians all complete with labour
and material as per the instruction of
Engineer-in-Charge.
b HT Motor (6.6kV above 1 MW) Weather
proof motor 5 nos 1197.88 5,989.40
Job shall include opening of cable termination
box, motor feeder back cover, breaker
checking & testing, cleaning, assistance
during testing, removal of earthing points if
required, tightness checks, sealing if required,
bolting back the cable termination box &
motor feeder back cover, providing any small
missing/damaged hardwares like nuts, bolts
etc, rack in-rack out the breaker, cleaning the
breaker panel, applying jelly/grease as
directed by Site Engineer/technicians all
complete with labour and material as per the
instruction of Engineer-in-Charge.
c HT Motor (6.6kV above 160kW and upto 1
MW) Explosion Proof Motor 50 nos 1311.87 65,593.50
Job shall include opening of cable termination
box, motor feeder back cover, breaker
checking & testing, cleaning, assistance
during testing, removal of earthing points if
required, tightness checks, sealing if required,
bolting back the cable termination box &
motor feeder back cover, providing any small
missing/damaged hardwares like nuts, bolts
etc, rack in-rack out the breaker, cleaning the
breaker panel, applying jelly/grease as
directed by Site Engineer/technicians all
complete with labour and material as per the
instruction of Engineer-in-Charge.
d HT Motor (6.6kV above 160kW and upto 1
MW) Weather Proof Motor 20 nos 898.41 17,968.20
Job shall include opening of cable termination
box, motor feeder back cover, breaker
checking & testing,cleaning, assistance
during testing, removal of earthing points if
required, tightness checks, sealing if required,
bolting back the cable termination box &
motor feeder back cover, providing any small
missing/damaged hardwares like nuts, bolts
etc, rack in-rack out the breaker, cleaning the
breaker panel, applying jelly/grease as
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 73 of 87
directed by Site Engineer/technicians all
complete with labour and material as per the
instruction of Engineer-in-Charge.
e LT Motors (415V above 55kW and upto
160kW) 300 nos 598.94 1,79,682.00
Job shall include opening of cable termination
box, motor feeder back cover, breaker
checking & testing,cleaning, assistance
during testing, removal of earthing points if
required, tightness checks, sealing if required,
bolting back the cable termination box &
motor feeder back cover, providing any small
missing/damaged hardwares like nuts, bolts
etc, rack in-rack out the breaker, cleaning the
breaker panel, applying jelly/grease as
directed by Site Engineer/technicians all
complete with labour and material as per the
instruction of Engineer-in-Charge.
f LT Motors (415V upto 55kW) 200 nos 449.21 89,842.00
Job shall include opening of cable termination
box, motor feeder, cleaning, breaker checking
& testing, assistance during testing, removal
of earthing points if required, tightness
checks, sealing if required, bolting back the
cable termination box & motor feeder ,
providing any small missing/damaged
hardwares like nuts, bolts etc, rack in-rack out
the feeder panel, cleaning the panel, applying
jelly/grease as directed by Site
Engineer/technicians all complete with labour
and material as per the instruction of
Engineer-in-Charge.
g HT Motors (6.6kV) breakdown Maintenance 10 nos 1844.48 18,444.80
Job shall include opening of cable termination
box, cleaning, removing earthing cables,
assistance during shifting of motor to
workshop, bearing replacement and bringing
back the motor to site, re-termination of
power cable, earthing cables, assistance
during no load run of the motor all complete
with labour and material as per the instruction
of Engineer-in-Charge.
h LT Motors (415V) breakdown Maintenance 20 nos 1197.88 23,957.60
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 74 of 87
Job shall include opening of cable termination
box, cleaning, removing earthing cables,
assistance during shifting of motor to
workshop, bearing replacement and bringing
back the motor to site, re-termination of
power cable, earthing cables, assistance
during no load run of the motor all complete
with labour and material as per the instruction
of Engineer-in-Charge.
7 Switchgear Panels
a HT Switchgear (33kV, 6.6kV) 75 nos 239.58 17,968.50
Job shall include opening of back cover of
switchgear panel (1 vertical), racking out the
breaker, assistance during testing, cleaning of
the panel, insulator bushing, CTs & the
cubicle, tightness check of the cables,
greasing & oiling of the breaker, replacing
any parts if required, applying HT/LT tape if
required (will be free issue by OMPL, bolting
back the covers. Job shall be carried in the
presence and guidance of OMPL Site
Engineer or Technicians
b LT Switchgear (415V) 100 nos 239.58 23,958.00
Job shall include opening of back cover of
switchgear panel (1 vertical), racking out the
breaker, assistance during testing, cleaning of
the panel, insulator bushing, CTs & the
cubicle, tightness check of the cables,
greasing & oiling of the breaker, replacing
any parts if required, applying HT/LT tape if
required (will be free issue by OMPL, bolting
back the covers all complete with labour and
material as per the instruction of Engineer-in-
Charge. Refer Clause 28 of SCC
c Bus Bar 200 mtr 239.58 47,916.00
Job shall include opening of top cover to
access the bus bars, assistance during testing,
cleaning of the chamber, insulator bushing,
CTs etc, tightness check of the bus bar joint,
replacing any parts if required, applying
HT/LT tape if required (will be free issue by
OMPL), bolting back the covers all complete
with labour and material as per the instruction
of Engineer-in-Charge.
8 Battery
Banks
a General Maintenance for UPS Battery Bank 20 nos 2623.74 52,474.80
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 75 of 87
Job shall include cleaning of the battery
connector plates with DM water, checking the
tightness, checking the individual cell
voltage, checking the specific gravity, filling
batteries with DM water in case of low level
as per the directions. DM water , instruments
for checking voltage & specific gravity shall
be provided free of cost, however it shall be
the responsibility of the contractor to arrange
for the same from store or any other location
at site with consultation with Site Engineer.
Job shall be carried in the presence and
guidance of OMPL Site Engineer or
Technicians all complete with labour and
material as per the instruction of Engineer-in-
Charge.. Each battery bank contain 320
numbers of 1.4V Lead Acid Batteries
b General Maintenance for Battery Charger
Battery Bank 10 nos 898.41 8,984.10
Job shall include cleaning of the battery
connector plates with DM water, checking the
tightness, checking the individual cell
voltage, checking the specific gravity, filling
batteries with DM water in case of low level
as per the directions. DM water , instruments
for checking voltage & specific gravity shall
be provided free of cost, however it shall be
the responsibility of the contractor to arrange
for the same from store or any other location
at site with consultation with Site Engineer.
Job shall be carried in the presence and
guidance of OMPL Site Engineer or
Technicians all complete with labour and
material as per the instruction of Engineer-in-
Charge.. Each battery bank contain 85
numbers of 1.4V Lead Acid Batteries
c Removal of Batteries from Battery Banks 5 nos 598.94 2,994.70
Job shall include removal of battery
connectors, removal of the faulty battery from
the bank, normalizing the battery bank,
checking the individual cell voltage, checking
the specific gravity, filling batteries with DM
water in case of low level as per the
directions, boost charge the faulty battery
using Cell Booster (will be made available by
OMPL), install a new battery or old battery
after boost charge in the bank and
normalization the battery bank. DM Water &
instruments for checking shall be provided by
OMPL, however it shall be the responsibility
of the contractor to arrange for the same from
store or any other location at site with
consultation with Site Engineer. Job shall be
carried out in the presence and guidance of
OMPL Site Engineer or technicians all
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 76 of 87
complete with labour and material as per the
instruction of Engineer-in-Charge.
9 AIR FILTER CLEANING FOR HVAC SYSTEM
Cleaning of Air filters/ Air fine filters installed at various
locations in the complex. Job includes, removing filters from
the frame up to a height of 6 meters, carrying filters to the
cleaning area upto 100 meters, cleaning with compressed air,
cleaning with water, drying the filters, re-fixing the filters on
the filter frame and, supply & replacing any rusted/loose
bolts, washers, gaskets etc. required for air tight operation of
the filters, as directed by the EIC. Job also includes supply of
tools and tackles like Hose for drawing air & water etc. ,
spanners, pliers, ladder etc. for removing & fixing of filters
and, nylon brush for cleaning the filters. OMPL shall provide
air & water for cleaning in the cleaning area free of cost.
1500 sq. m 110.26 165390.00
10 COMPENSATION BASED ON CLAUSE 38 & 39 of SCC 1 LUMPSUM 50000.00 50000.00
TOTAL 9,21,372.92
Sn Description Qty Unit Rate Total Amount
F MISCELLANEOUS JOBS
1
Excavation of earth for cable /pipe laying, earthing for electrical work. Job shall include excavation of earth for cable treanches/laying of pipes for cable work in all types of soil including saturated soil upto a max depth of 1.5 mtrs including shoring, strutting and bailing out excess water if required, backfilling and compacting in layers not exceeding 20 cm thick to the finished ground level and disposal and dressing of excess earth within a lead of 2 km all complete with labour and materials as per standards, drawings and directions of EIC
50 m3 300.00 15000.00
2 Supply and Spreading of sand/fine stone dust. Job shall include supply and spreading of fine river sand/fine stone dust in cable trenches as per direction of EIC
50 m3 1200.00 60000.00
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 77 of 87
3
Supplying & fixing of cable route marker with cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size) of size 60 cm x 60 cm at the bottom and 50 cm x 50 cm at the top with a thickness of 10 cm including incription duly engraved as required. Encription shall be marked with paint if required and instructed by Engineer-in-Charge.
2 nos 797.62 1595.24
4 Fixing of Cable route marker as required in ground as per drawing & directions of EIC. Same as above but excluding the cost of route marker.
2 nos 239.22 478.44
5 Supply & laying of bricks of approved 2nd class with thickness of min 75mm in the cable trenches for cable protection without any gaps as per the direction of the EIC
10 m2 554.65 5546.5
6
Removal of RCC slab upto 150 mm thick and of any size placed above the cable trench, handling carefully without any damage of the slab and cable beneath it and keeping it back in position after laying/removing the cable and sealing the same with cement & sand. Job shall be complete in all respect including labor & materials and as per direction of Engineer-in-Charge
10 m2 46.91 469.1
7 DISMANTLING JOB
Dismantling shall include stacking of serviceable material and disposal of underviceable material within a lead of 2km or putting the material back in the same location or new location within a lead of 2 km. Job shall include removal & putting it back at the same or new location without any damage to the cables near it all complete with labour & materials as per the direction of the Engineer in Charge..
a Removal of sand from cable trench. 50 m3 279.73 13986.5
b Removal of bricks from cable trench 1000 nos 1.15 1150
8 Installation of Wall/Ceiling Mounted Fans
Fixing of wall mounted fans completed with lead in wires and other accessories all complete with labour & material as per the direction of the Engineer-in-Charge. Cost of fan shall be excluded.
25 nos 250 6250
9 Installation of Exhaust fans
Fixing of exhaust fans on existing openings, complete with lead in wires and other accessories all complete with labour and materials as per the direction of the Engineer-in-Charge. (Cost of fans shall be excluded)
a With louver Shutter/Mesh 5 nos 302.41 1512.05
b Without louver shutter/Mesh 5 nos 168.02 840.1
c FLP/IS Exhaust Fans 5 nos 604.85 3024.25
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 78 of 87
10 Transportation of LT Motors
Transportation of LT Motors for maintenance from OMPL Site to workshop within the complex and bringing back to site for installation after maintenance. This includes arranging of suitable vehicle for to & fro transportation, loading & unloading of motors at workshop & site after maintenance all complete with labour, materials, tools & tackles as per the direction of Engineer-in-Charge. NOTE: Lifting facility to put the motor in the vehicle at both ends will be provided by OMPL for the motors of capacity more than 15kW.
a Motors upto 1.5kW 5 nos 545.07 2725.35
b Motors above 1.5kW and upto 18.5 kW 2 nos 1263.9 2527.8
c Motor above 18.5kW and upto 75kW 2 nos 2537.41 5074.82
11
Structural steel works riveted or bolted in built up sections, trussed and framed work, including supply of steel, cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete with labour & material as per the direction of EIC
100 kg 73.92 7392
12
Structural steel works riveted or bolted in built up sections, trussed and framed work, cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete with labour & material as per the direction of EIC. Steel shall be issued free of cost by OMPL.
100 kg 29.57 2957
13 Rewinding of Fans
Rewinding of ceiling/pedestal/exhaust/air circulator fans of all types/sizes/makes including 1-phase and 3 phase type exhaust fans of upto 2.2kW capacity and supply of super enameled winding wire (Devi Dayal make or ISI marked approved equivalent). This also includes replacement of single/double bearing SKF make/bushes(as per original make) and overhauling of fans and all job related to complete the work in totality. This also includes removal of fans from site, cleaning, greasing after degreasing, assembling and installation and commissioning after repair and replacement of condensor if required including transportation of fan from site to contractor's workshop and back to site. Note: Contractor shall give a guarantee of minimum 6 months and if the winding burns again within 6 months, same shall be replaced free of cost. Burnt winding shall be kept by the contractor.
a Ceiling/Pedestal Fans 5 nos 579.56 2897.8
b Exhaust/Air circulator fans 5 nos 816.66 4083.3
14 Transportation of Transformer Oil 10 nos 100 1000
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 79 of 87
Transportation of transformer oil anywhere within the complex in drums of 200ltrs each from warehouse/store to site, pouring in the transformer tank and returning empty/unused oil back to store. Job shall include supply of necessary vehicle for transportation of the drums including labours as required for loading, unloading & transportation all complete as per the directions of the Engineer-in-Charge.
15 Temporary Power Connection
Providing temporary power connection for the following items including bringing, shifting necessary materials from store to site & cleaning these equipment before installation if required. The connection shall also be dismantled after job finishing and return the material back to the store. These services might be required at any point of throughout the day in general hours as well as odd hours all complete with labour and materials as per the direction of the Engineer-in-Charge. Note: All the above materials required for the job except for small consumables like PVC tape, cleaner,cloth etc shall be given by OMPL free of cost.
a
Hydroblast machines, welding machines, hand lamps, other electrical equpiment of various rating/capacity with adequate cable leads as per direction of EIC
10 nos 165 1650
16 Painting of Electrical surface
Job shall include cleaning of the surface to make it free from rust or any foreign materials, rubbing down thoroughly with emery paper, wire bush, washing with degresing solvent to remove grease etc and preparation of surface of application of enamel paint by spray painting on bus duct, trnasformers, motors or any other metallic surface with one coat of ready mixed primer and two coats of approved quality/APCOLITE ASIAN synthetic enamel paint including supply of the paint suitable for a temperature of up to 100 deg C all complete with men and materials as per the direction of the Engineer-in-CHarge.
50 sq. m 170 8500
17 Letter Writing
Job shall include cleaning of the surface to make it free from rust or any foreign materials and preparation of the surface for application of enamel paint with one coat and then letter writing of the following sizes as per the direction & instruction of the Engineer-in-Charge. Supply of paints, brushes, and other consumables shall be in Contractor's Scope.
a upto 2 inch 1000 nos 4 4000
b upto 3 inch 500 nos 5 2500
c upto 4 inch 100 nos 6 600
TOTAL 1,55,760.25
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 80 of 87
Sn Description Qty Unit Rate Total Amount
G EARTHING
1 Providing Earth Electrode
Providing earthing electrode as per IS: 3043 standard/drawing/specifications with following sizes medium quality, class-B, ITC/KT/Jindal make GI pipe fabricated as per the standard drawing and drive in the earth pit filled with charcoal or coke dust mixed with salt clay including inspection chamber as per the drawing with removable RCC cover, earth excavation, backfilling, masonary work etc, all complete with labour and materials as per the direction of the Engineer-in-Charge. Supply of all materials including GI earth electrode, salt charcoal, funnel, masonry, cover and other necessary installation hardwares are in Erection contractor's scope.
65 mm dia 3 mtr long 5 nos 13000 65000
2 Salt & Charcoal
Extra salt and charcoal if required for pipe earth electrode as required. (One measured quantity shall comprise of 64kg charcoal & 5 kg salt)
2 nos 1200 2400
3 GI Earthing Bus.
Supply & Installation of GI Earth Bus of the following sizes as per IS:3043 with a clearance of min 6 mm from the wall with spacing insulator GI rack bolts wherever necessary including drilling 6 mm dia holes at about 25mm apart complete with double nuts, washers GI machine tools etc. Supply of all installation Hardwares like Lugs, Nuts, Bolts, Washer etc, are in Erection contractor's scope. Contractor shall refer typical installation detail of earthing for requirement of Earthing Bus. The nuts and Bolts shall be of SS 304 grade.
a 75 x 10 mm GI flat 15 mtr 445.91 6688.65
b 75 x 5 mm GI flat 15 mtr 267.75 4016.25
c 50 x 6 mm GI flat 15 mtr 194.29 2914.35
d 40 x 5 mm GI flat 15 mtr 146.79 2201.85
e 25 x 5 mm GI flat 18 mtr 90.24 1624.32
4 Earthing Conductors (Supply+Installation)
Laying of earthing conductors of following sizes. Supply of all installation Hardwares like Lugs Bolts, Washer etc, are in Erection contractor's scope.The nuts and Bolts shall be of SS 304 grade. Supply of Earthing cable/conductor shall be in the scope of Contractor. Earthing cable outer sheath shall be UV resistant PVC type.
a 75 X 10mm G.I strip 25 mtr 423.51 10,587.75
b 75 x 5mm G.I. Strip 25 mtr 245.36 6,134.00
c 50 X 6mm G.I strip 25 mtr 187.31 4,682.75
d 40 x 5mm G.I strip 25 mtr 122.49 3,062.25
e 25 x 5mm GI strip 25 mtr 78.30 1,957.50
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 81 of 87
f 1 X 6 Sqmm Copper Cable 25 mtr 52.67 1,316.75
g 1 X 10 Sqmm Copper Cable 25 mtr 75.77 1,894.25
h 1 X 16 Sqmm Copper Cable 25 mtr 142.07 3,551.75
i 1 X 25 Sqmm Copper Cable 25 mtr 193.48 4,837.00
j 1 X 35 Sqmm Copper Cable 25 mtr 243.47 6,086.75
k 1 X 50 Sqmm Copper Cable 25 mtr 321.24 8,031.00
l 1 X 16 Sqmm GI STRANDED Cable 25 mtr 41.23 1,030.75
m 1 X 25 Sqmm GI STRANDED Cable 25 mtr 41.23 1,030.75
n 1 X 35 Sqmm GI STRANDED Cable 25 mtr 44.94 1,123.50
o 1 X 50 Sqmm AYY Cable 25 mtr 57.18 1,429.50
p 1 X 120 Sqmm AYY Cable 25 mtr 129.36 3,234.00
q 1 X 185 Sqmm AYY Cable 25 mtr 170.94 4,273.50
5 Earthing Conductors (Only Installation)
Laying of earthing conductors of following sizes. Supply of all installation Hardwares like Lugs Bolts, Washer etc, are in Erection contractor's scope.The nuts and Bolts shall be of SS 304 grade. Earthing cable/conductor shall be free issue item.
a 75 X 10mm G.I strip 25 mtr 127.05 3,176.25
b 75 x 5mm G.I. Strip 25 mtr 73.61 1,840.25
c 50 X 6mm G.I strip 25 mtr 56.19 1,404.75
d 40 x 5mm G.I strip 25 mtr 36.75 918.75
e 25 x 5mm GI strip 25 mtr 23.49 587.25
f 1 X 6 Sqmm Copper Cable 25 mtr 15.80 395.00
g 1 X 10 Sqmm Copper Cable 25 mtr 22.73 568.25
h 1 X 16 Sqmm Copper Cable 25 mtr 42.62 1,065.50
i 1 X 25 Sqmm Copper Cable 25 mtr 58.04 1,451.00
j 1 X 35 Sqmm Copper Cable 25 mtr 73.04 1,826.00
k 1 X 50 Sqmm Copper Cable 25 mtr 96.37 2,409.25
l 1 X 16 Sqmm GI STRANDED Cable 25 mtr 12.37 309.25
m 1 X 25 Sqmm GI STRANDED Cable 25 mtr 12.37 309.25
n 1 X 35 Sqmm GI STRANDED Cable 25 mtr 13.48 337.00
o 1 X 50 Sqmm AYY Cable 25 mtr 35.63 890.75
p 1 X 120 Sqmm AYY Cable 25 mtr 38.81 970.25
q 1 X 185 Sqmm AYY Cable 25 mtr 51.28 1,282.00
6 Improving Earth Resistance
Job shall include cleaning of the earth pit if required, pouring water, excavation to a depth of 1 mtr all around the earth electrode, adding bentonite (free issue from OMPL) if required, adding salt, charcoal (supply shall be claimed under respective item) as desired, backfilling, compacting, any other measures as required or directed by the Site Engineer to improve the resistance value all complete with labour & material as per the direction of the Enginner-in-Charge. Buckets required for Water shall be arranged by the contractor along with other tools and tackles.
10 nos 500.00 5,000.00
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 82 of 87
TOTAL 1,73,849.92
Sn Description Qty Unit Rate Total Amount
H SUPPLY
Refer Clause No. 30 of SCC for scope & terms
1 Insulation Tape 1200 nos 12 14,400.00
Supply of Insulation Tape of approved make (Steelgrip or
equivalent with ISI mark) and of 1.9cm x 25m size and in
various colours as required & directions of Engineer-in-
Charge.
2 M-Seal 25 nos 250 6,250.00
Supply of M-Seal make General Purpose easymix epoxy
putty and 1kg packing as required & directions of Engineer-
in-Charge
3 Silicon Sealant 50 nos 150 7,500.00
Supply of ALSTONE GP-300 or approved equivalent 280ml
silicone sealant as required & directions of Engineer-in-
Charge
4 WD-40 cleaner 65 nos 300 19,500.00
Supply of WD-40 or equivalent approved make as required
& directions of Engineer-in-Charge
5 CRC 2-26 cleaner 65 nos 300 19,500.00
Supply of Electrical Contact Cleaner WD-40 or equivalent
approved make as required & directions of Engineer-in-
Charge
6 Aluminium Tape 100 nos 250 25,000.00
Supply of Aluminium tape roll of 2'' width and 55m length
of 3M make or approved equivalent as required & directions
of Engineer-in-Charge
7 Supply of Copper lugs
Supply of copper tube terminal heavy duty (crimping cable
lug) of KSE/Dowells make or equivalent approved and
certified by Engineer-in-Charge of the follwing sizes
a 1.5 sq.mm 100 nos 4.14 414.00
b 2.5 sq.mm 100 nos 4.47 447.00
c 4 sq.mm 100 nos 5.2 520.00
d 6 sq.mm 100 nos 6.69 669.00
e 10 sq.mm 50 nos 6.99 349.50
f 16 sq.mm 50 nos 9.52 476.00
g 20 sq.mm 50 nos 10.1 505.00
h 25 sq.mm 50 nos 12.78 639.00
i 35 sq.mm 20 nos 18.28 365.60
j 50 sq.mm 20 nos 30.35 607.00
k 70 sq.mm 20 nos 45.95 919.00
l 95 sq.mm 10 nos 66.92 669.20
m 120 sq.mm 10 nos 87.84 878.40
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 83 of 87
n 150 sq.mm 10 nos 114.17 1,141.70
o 185 sq.mm 10 nos 148.83 1,488.30
p 240 sq.mm 5 nos 221.21 1,106.05
q 300 sq.mm 5 nos 322.93 1,614.65
TOTAL 1,04,959.4
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC
MANGALORE PETROCHEMICALS LTD (OMPL) – AN SEZ UNIT
Tender No.1070C16032 Page 84 of 87
Format-VI INTEGRITY PACT
Between
ONGC Mangalore Petrochemicals Ltd (OMPL) hereinafter referred to as "The Principal",
and
M/s____________________________________________________________ hereinafter referred to as "The Bidder/Contractor"
Preamble
The Principal intends to award, under laid down organizational procedures, contract/s for procurement of products /
services vide Tender No. Tender No. 1070C16032____________________ dt.______________ The Principal values full
compliance with all relevant laws and regulations, and the principles of economic use of resources, and of fairness and
transparency in its relations with its Bidder/s and Contractor/s.
In order to achieve these goals, the Principal cooperates with the renowned international Non-Governmental Organization
"Transparency International" (TI). Following TI's national and International experience, the Principal will appoint an
external independent Monitor who will monitor the tender process and the execution of the contract for compliance with
the principles mentioned above.
Section 1 - Commitments of the Principal
(1) The Principal commits itself to take all measures necessary to prevent corruption and to observe the following principles:-
1. No employee of the Principal, personally or through family members, will in connection with the tender for, or the
execution of a contract, demand, take a promise for or accept, for him/herself or third person, any material or
immaterial benefit which he/she is not legally entitled to.
2. The Principal will, during the tender process treat all Bidders with equity and reason. The principal will in particular,
before and during the tender process, provide to all Bidders the same information and will not provide to any bidder
confidential/additional information through which the Bidder could obtain an advantage in relation to the tender
process or the contract execution.
3. The Principal will exclude from the process all known prejudiced persons.
(2) If the Principal obtains information on the conduct of any of its employees which is a criminal offence under the relevant
Anti-Corruption Laws of India or if there be a substantive suspicion in this regard, the Principal will inform its Vigilance
Office and in addition can initiate disciplinary actions.
Section 2 – Commitments of the Bidder/Contractor
(1) The Bidder / Contractor commits itself to take all measures necessary to prevent corruption. He commits himself to observe
the following principles during his participation in the tender process and during the contract execution.
1. The Bidder/Contractor will not, directly or through any other person or firm, offer, promise or give to any of the
Principal’s employees involved in the tender process or the execution of the contract or to any third person any
material or immaterial benefit which he/she is not legally entitled to, in order to obtain in exchange any advantage of
any kind whatsoever during the tender process or during the execution of the contract.
ANNUAL RATE CONTRACT FOR ELECTRICAL MAINTENANCE JOBS FOR ONGC