FEATURES Mild steel tube capacity 60 x 2 mm 1½” Gas inches (3.68 mm) capacity 50 x 50 x 2 mm square tube capacity Maximum bending radius 200 mm "NC programmable C axis with manual B & Y positioning" Two bending speed Programmable bend sequencing and mandrel retraction Independent clamp and pressure die adjustment Micrometer wiper die adjustment Secondary hydraulic pressure die stabilization system Quick change tooling reduces setup time Tables available in 5’ or 10’ lengths; standard with pneu- matic material clamping and DRO system for linear and rotational positioning Base machine converts to accept Ercolina non-mandrel tooling www.ercolina.com Mandrel benders Max capacity Stainless Steel 50 x 2 mm TB050T-A3 NEW
2
Embed
Mandrel benders - Ercolinaercolina.co.za/wp-content/uploads/2014/05/TB050T-A3-en.pdf · Base machine converts to accept Ercolina non-mandrel tooling Mandrel benders Max capacity Stainless
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
FEATURES
Mild steel tube capacity 60 x 2 mm 1½” Gas inches (3.68 mm) capacity50 x 50 x 2 mm square tube capacityMaximum bending radius 200 mm"NC programmable C axis with manual B & Y positioning"Two bending speedProgrammable bend sequencing and mandrel retractionIndependent clamp and pressure die adjustment
Micrometer wiper die adjustmentSecondary hydraulic pressure die stabilization systemQuick change tooling reduces setup timeTables available in 5’ or 10’ lengths; standard with pneu-matic material clamping and DRO system for linear and rotational positioningBase machine converts to accept Ercolina non-mandrel tooling
www.ercolina.com
Mandrel bendersMax capacity Stainless Steel 50 x 2 mm
capacities based on materials with T.S. 42 Kg/mm2 (psi 60.000 Y.P. 25 Kg/mm2 (psi 36.000)
TECHNICAL DATA
Flexion Modulus
Maximum Outside Diameter
Maximum Center Line Radius (CLR)
Minimum Center Line Radius (CLR)
Maximum Bend Angle
Power
Number of stored programs
Bend Speed
Noise Level
Hydraulic Oil Capacity
Dimensions (LxWxH)
Weight
5.6 cm3
64 mm
200 mm
20 mm
180°
3.5 kW
30 x 9 1,25/2,5 rpm (bend/return)
65 dB
50 l
1118x8130x2100
600 kgs
MAXIMUM CAPACITY
Max Ø (mm)Materiale
Round Tube
Pipe
Stainless Steel
Copper aluminium
Square Tube
Rect. Tube easy way
Rect. Tube hard way
Rev
Mkt
/03/
2014
/en
60
1”1/2
50
64
40x40
25x50
50x25
2
Sch 40
2
2
3
6
3
CML INTERNATIONAL S.p.A. reserves the right to make changes at any time without notice to price, color, material, equipment, speci�cations, models, machines operation, tooling requirements and availability.