Luogo e Data/Place and date: Vimercate (MB), 12 aprile 2017 Per l'Organismo di Certificazione/ For the Certification Body Vittore Marangon Management Representative La validità del presente Certificato è subordinata al rispetto delle condizioni contenute nel Contratto di Certificazione/ Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. DNV GL Business Assurance Italia S.r.l., Via Energy Park, 14 - 20871 Vimercate (MB) - Italy. TEL:039 68 99 905. www.dnvgl.it/assurance MANAGEMENT SYSTEM CERTIFICATE Certificato no./Certificate No.: 97054-2011-AE-ITA-ACCREDIA Data prima emissione/Initial date: 09 maggio 2011 Validità:/Valid: 06 maggio 2017 - 06 maggio 2020 Si certifica che il sistema di gestione di/This is to certify that the management system of I.M.P. S.p.A. INDUSTRIA MANUFATTI PLASTICI Sede Legale e Operativa: Via Grazia Deledda 12/14 - 21047 Saronno (VA) - Italy È conforme ai requisiti della norma per il Sistema di Gestione Ambientale/ Has been found to conform to the Environmental Management System standard: UNI EN ISO 14001:2015 (ISO 14001:2015) Valutato secondo le prescrizioni del Regolamento Tecnico RT-09/ Evaluated according to the requirements of Technical Regulations RT-09 Questa certificazione è valida per il seguente campo applicativo: Progettazione e costruzione stampi per prodotti tecnici attraverso le fasi di fresatura, tornitura, rettifica ed elettroerosione. Produzione di manufatti termoplastici e termoindurenti attraverso le fasi di stampaggio, co-stampaggio e assemblaggio (Settore EA: 14) This certificate is valid for the following scope: Design and construction of moulds for technical products through the phases of milling, turning, grinding and electrical erosion. Production of thermoplastic and thermosetting products through the phases of moulding, co-moulding and assembly (EA Sector: 14)