Management Interfaces and Connections of OptiX OSN 8800/6800A Interfaces For OptiX OSN 8800/OptiX OSN 6800A, the NM_ETH1/NM_ETH2 interfaces on the TN51ETH1/TN51ETH2/TN16EFI boards are used for achieving inter-NE communication. The ETH1, ETH2, and ETH3 interfaces on the TN51ETH2/TN16EFI boards are used to achieve intra-NE communication. Table 1 provides the correct connections of these network interfaces. Table 1 Network cable interfaces 1
8
Embed
Management interfaces and connections of opti x osn 8800 6800a
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Management Interfaces and Connections of OptiX OSN 8800/6800A
Interfaces
For OptiX OSN 8800/OptiX OSN 6800A, the NM_ETH1/NM_ETH2 interfaces on the
TN51ETH1/TN51ETH2/TN16EFI boards are used for achieving inter-NE communication.
The ETH1, ETH2, and ETH3 interfaces on the TN51ETH2/TN16EFI boards are used to
achieve intra-NE communication. Table 1 provides the correct connections of these
network interfaces.
Table 1 Network cable interfaces
1
2
Connections
On a network where only OptiX OSN 8800 or OptiX OSN 6800A NEs are used, intra-NE
and inter-NE communication are achieved through fiber connections and network cable
connections.
NE Connections
Figure 1 and Figure 2 show the NE connection scheme. The figure presents
connections
between two NEs: NE1 and NE2. Each NE consists of three subracks, one of which is
the master subrack and the other two are slave subracks. The master and slave
subracks are connected using fibers and network cables.
OptiX OSN 8800/6800A/3800A Installing, Operating and Maintaining Your Network(For
Field Engineer) 3 Quick View of Product Issue 02 (2013-10-30) Huawei Proprietary and