This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1. unConference on Future of Industry, Mobility and Making FIMM
201510
2. 64
3.
4. OSV
5. 65-6
6.
7.
8. Fability Scooter Debut! by
9. 20156
10. 3D Imaging using 123D 123D3D
11. Final Design taking real challenges of making including
using Shopbot into account ShopBot
12. Some parts are hard to make A Scooter from Freerider,
Taiwan, acquired via Net auction, broke them apart Freeider
13. Final Design around Rear Axle
14. Final Design of Wood Body to be made by ShopBot
ShopBot
15. Rear axle mount and Front wheel forks are made by myself:
using Iron Angle Pipes, Round Pipes, Steel plates and Round
rods
16. Thank you Takemura-san at FabLab Hamamatsu who helped the
welding of Rear Axle Mount & Front Folks
17. Wood Body cut by ShopBot One extra for Strengthen Test
possible ShopBot 21
18. Hub to support the front wheels also fixed by U-bolt U
Freerider
19. 2 Main body plates combined with Hub plate and
reinforcement to complete the Main Body 2
20. The Seat from Freerider and Battery now in place
Freerider
21. The workshop is my office
22. Test Ride!! Hacksaw and file I used the most. Feeln
great!!
23. Fixed the body to free differential unit, now its picture
time
24. As of Friday, last week, May 23 Long way to come! !!
25. Together with VCS-s3 I am using now More works to put motor
controller, wiring the battery and painting for rust- and
water-proof VCS-s3