CNC CNC CNC CNC INTERLAYER INTERLAYER INTERLAYER INTERLAYER TECHNOLOGY TECHNOLOGY TECHNOLOGY TECHNOLOGY Contact Contact Contact Contact us: us: us: us: [email protected][email protected][email protected][email protected] / [email protected][email protected][email protected][email protected] / [email protected][email protected][email protected][email protected]/ [email protected][email protected][email protected][email protected]1 Make Make Make Make Switchable Switchable Switchable Switchable Smart Smart Smart Smart Glass Glass Glass Glass Solution Solution Solution Solution with with with with Self-Adhesive Self-Adhesive Self-Adhesive Self-Adhesive Switchable Switchable Switchable Switchable Privacy Privacy Privacy Privacy Film Film Film Film About About About About SF SF SF SF Smart Smart Smart Smart Film ilm ilm ilm Self-adhesive Smart Film is made of Protect Film, Adhesive Surface, ITO Film, Liquid Crystal & Polymer. It works same resemblance performances as the Privacy Glass made in laminating way with NON-Adhesive Switchable Smart Film. Its very convenient and flexible to install the SELF-ADHESIVE Switchable Privacy Film on the ALREADY installed windows. SELF-ADHESIVE SELF-ADHESIVE SELF-ADHESIVE SELF-ADHESIVE SWITCHALBE SWITCHALBE SWITCHALBE SWITCHALBE PRIVACY PRIVACY PRIVACY PRIVACY FILM FILM FILM FILM Performance Performance Performance Performance Parameters Parameters Parameters Parameters +Switch on :Transparent +Switch off: Opaque +Dimmer: Transparent - opaque ( AC 0~110 V) +Power Consumption: SELF-ADHESIVE SWITCHALBE PRIVACY FILM has power consumption about 6~7W/m2 +SELF-ADHESIVE SWITCHALBE PRIVACY FILM which is transparent or opaque, excludes 99% outside UV Radiation. Description Switch Data Description Switch Data Milky White Film Transmittance On 87% Dark Gray Film Tramsmittance On 83% Off 7% Off 7% Haze On 5% Haze On 2% Off 78% Off 87% Operate Voltage 90V AC UV Blocked 99%
10
Embed
Make Switchable Privacy Glass Solution with Self-Adhesive Switchable Privacy Film
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Self-adhesive Smart Film is made of Protect Film, Adhesive Surface, ITO Film, Liquid Crystal &Polymer. It works same resemblance performances as the Privacy Glass made in laminating waywith NON-Adhesive Switchable Smart Film. Its very convenient and flexible to install theSELF-ADHESIVE Switchable Privacy Film on the ALREADY installed windows.
SELF-ADHESIVESELF-ADHESIVESELF-ADHESIVESELF-ADHESIVE SWITCHALBESWITCHALBESWITCHALBESWITCHALBE PRIVACYPRIVACYPRIVACYPRIVACYFILMFILMFILMFILM PerformancePerformancePerformancePerformance ParametersParametersParametersParameters+Switch on :Transparent+Switch off: Opaque+Dimmer: Transparent - opaque ( AC 0~110 V)+Power Consumption: SELF-ADHESIVE SWITCHALBE PRIVACY FILM has powerconsumption about 6~7W/m2+SELF-ADHESIVE SWITCHALBE PRIVACY FILM which is transparent or opaque, excludes99% outside UV Radiation.
PLEASEPLEASEPLEASEPLEASE NOTENOTENOTENOTE- The External dimensions of the SELF-ADHESIVE Switchable Privacy Film are 2 - 3mm smallerthan the visual area of the windows.- The BUS-BAR (electrical contact strip) should never contact with any metal frame or trim.
Spray the glass with LIQUID glass polish and clean with a SOFT LINT-FREE cloth.Then Using a LINT FREE cloth, wipe the glass surface with IPA (Isopropyl Alcohol) and wait forEVAPORATE.STEPSTEPSTEPSTEP 5555
Wipe down the Protective Liner on the cling side of the SELF-ADHESIVE Switchable PrivacyFilm to remove any dust.STEPSTEPSTEPSTEP 6666
Remove the first 100mm (4”) of the protective liner covering the cling side onthe BUS-BAR edge.Make sure that you do this in a clean dust free environment.
Remove the Protective Liner from the ADHESIVE STRIP on the BUS-BAR edge.
STEPSTEPSTEPSTEP 8888
Make the BUS-BAR edge of the SELF-ADHESIVE Switchable Privacy Film along with the topedge of the glass. When in position, run your finger along the BUS-BAR to fix the top edge.
Gradually pull away the protective liner and allow the film to slowly adhere to the glass surfaceunder its own pressure.Using the roller move down the film working in horizontal lines left to right to disperse any airbubbles.If any small bubbles are visible, carefully lift the film and let it sit back down under its ownpressure again until you have a bubble-free installation.STEPSTEPSTEPSTEP 11110000
Use the soft edge squeegee to work any small bubbles and the edges of the film.But if any edges are lifting slightly, do not worry, they will relax down once the PROTECTIVELINER is removed.STEPSTEPSTEPSTEP 11111111
Once the film is installed on the glass you can then start work on wiring the bus-bar. Carefullysolder the electrical cable to the mesh tags.There are two tags on the left hand side and two tags onthe right hand side. Solder a cable to one tag on the left (positive connection) and one tag on theright (negative connection). The other tags are only there as spares. You can use them to connectthe cables to a switch or transformer and test the switching from frosted to clear. Once you havetested successfully, you can trim off the spare mesh tags.STEPSTEPSTEPSTEP 11112222
Now you can carefully remove the other protective liner.STEPSTEPSTEPSTEP 11113333
Run some clear double-sided tape along the bus-bar edge to hold your electrical cables in placewhile you prepare the cover trim.STEPSTEPSTEPSTEP 11114444
Use Dow Corning (7091) non-acid based silicone along the bus-bar edge to hold the protectivecover trim in place. We recommend you use a plastic cover trim.STEPSTEPSTEPSTEP 11116666
Now, Congratulations! The installation is complete and you can clean the film. For mostinstallations we would recommend that you use a cover trim on all edges of the film.